Skip to contentSkip to conversation

net: usb: cdc_mbim: adding Microsoft mobile broadband modem

PATCH In review Seunghun Han 2 participants 6 messages Aug 3, 2022 – Oct 12, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: usb: cdc_mbim: adding Microsoft mobile broadband modem

Microsoft branded mobile broadband modems typically used in the Surface series don't work with the Linux kernel. When I query firmware information to the modem using the mbimcli tool, it always returns the Failure (0x02) value like below.

=== Start of the firmware id query ===
$> mbimcli -d /dev/cdc-wdm4 --ms-query-firmware-id -v

[26  Jul 2022, 05:24:07] [Debug] opening device...
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Queried max control message size: 4096
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Sent message...

<<<<<< RAW:
<<<<<< length = 16
<<<<<< data = 01:00:00:00:10:00:00:00:01:00:00:00:00:10:00:00

[26 Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Sent message (translated)... <<<<<< Header:

<<<<<<   length      = 16
<<<<<<   type        = open (0x00000001)
<<<<<<   transaction = 1

<<<<<< Contents:
<<<<<< max control transfer = 4096

[26 Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Received message...

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

RAW:
length = 16
data = 01:00:00:80:10:00:00:00:01:00:00:00:02:00:00:00

[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Received message...Message Type 80000001
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 864
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 897
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 923
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 930
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 935
[26  Jul 2022, 05:24:07] [Debug] getting open done result failed: closed

error: couldn't open the MbimDevice: Failure
=== End of the firmware id query ===

After kernel debugging, I found that the modem reported that the dwNtbInMaxSize value of ncm_parm was 16384 during the initialization sequence.
So the cdc_ncm_update_rxtx_max() in cdc_ncm_bind_common() didn't send USB_CDC_SET_NTB_INPUT_SIZE command because the default input size was the same, 16384.

It's good and proper behavior. However, Microsoft branded MBMs (including the latest one in Surface Go 3) fail until the kernel explicitly sets the input size.

This patch adds a new table and code changes that explicitly send the USB_CDC_SET_NTB_INPUT_SIZE command to support Microsoft branded MBMs.

---
 drivers/net/usb/cdc_mbim.c  | 24 ++++++++++++++++++++++++
 drivers/net/usb/cdc_ncm.c   |  2 +-
 include/linux/usb/cdc_ncm.h |  1 +
 3 files changed, 26 insertions(+), 1 deletion(-)
drivers/net/usb/cdc_mbim.c +24 -0
index c89639381eca..c0c23cfc02a7 100644
@@ -618,6 +618,22 @@ static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
 	.data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
 };
 
+/* Microsoft branded modems do not work properly without setting the input size
+ * explicitly in cdc_ncm_bind_common.
+ * CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY flag is used to set the input size
+ * during initialization.
+ */
+static const struct driver_info cdc_mbim_info_set_input_size_explicitly = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+	.data = CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY,
+};
+
 static const struct usb_device_id mbim_devs[] = {
 	/* This duplicate NCM entry is intentional. MBIM devices can
 	 * be disguised as NCM by default, and this is necessary to
@@ -665,6 +681,14 @@ static const struct usb_device_id mbim_devs[] = {
 	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 	},
 
+	/* Some Microsoft branded mobile broadband modems used in the Surface
+	 * seires are known to fail unless the input size is set explicitly.
+	 * Applying it to all Microsoft branded MBMs.
+	 */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x045e, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_set_input_size_explicitly,
+	},
+
 	/* default entry */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
drivers/net/usb/cdc_ncm.c +1 -1
index 8d5cbda33f66..915e29c987cb 100644
@@ -407,7 +407,7 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
 	val = cdc_ncm_check_rx_max(dev, new_rx);
 
 	/* inform device about NTB input size changes */
-	if (val != ctx->rx_max) {
+	if (val != ctx->rx_max || ctx->drvflags & CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY) {
 		__le32 dwNtbInMaxSize = cpu_to_le32(val);
 
 		dev_info(&dev->intf->dev, "setting rx_max = %u\n", val);
include/linux/usb/cdc_ncm.h +1 -0
index 2d207cb4837d..a24f84b31a54 100644
@@ -88,6 +88,7 @@
 #define CDC_NCM_FLAG_NDP_TO_END			0x02	/* NDP is placed at end of frame */
 #define CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE	0x04	/* Avoid altsetting toggle during init */
 #define CDC_NCM_FLAG_PREFER_NTB32 0x08	/* prefer NDP32 over NDP16 */
+#define CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY	0x10	/* Set input size explicitly during init */
 
 #define cdc_ncm_comm_intf_is_mbim(x)  ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
 				       (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
Signature · 1 line
2.30.2
#1 lore raw

Hello Seunghun,

Il giorno mer 3 ago 2022 alle ore 11:10 Seunghun Han <[email protected]> ha scritto:

Quoted 44 lines

Microsoft branded mobile broadband modems typically used in the Surface series don't work with the Linux kernel. When I query firmware information to the modem using the mbimcli tool, it always returns the Failure (0x02) value like below.

=== Start of the firmware id query ===
$> mbimcli -d /dev/cdc-wdm4 --ms-query-firmware-id -v

[26  Jul 2022, 05:24:07] [Debug] opening device...
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Queried max control message size: 4096
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Sent message...

<<<<<< RAW:
<<<<<< length = 16
<<<<<< data = 01:00:00:00:10:00:00:00:01:00:00:00:00:10:00:00

[26 Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Sent message (translated)... <<<<<< Header:

<<<<<<   length      = 16
<<<<<<   type        = open (0x00000001)
<<<<<<   transaction = 1

<<<<<< Contents:
<<<<<< max control transfer = 4096

[26 Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Received message...

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

RAW:
length = 16
data = 01:00:00:80:10:00:00:00:01:00:00:00:02:00:00:00

[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Received message...Message Type 80000001
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 864
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 897
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 923
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 930
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 935
[26  Jul 2022, 05:24:07] [Debug] getting open done result failed: closed

error: couldn't open the MbimDevice: Failure
=== End of the firmware id query ===

After kernel debugging, I found that the modem reported that the dwNtbInMaxSize value of ncm_parm was 16384 during the initialization sequence.
So the cdc_ncm_update_rxtx_max() in cdc_ncm_bind_common() didn't send USB_CDC_SET_NTB_INPUT_SIZE command because the default input size was the same, 16384.

Quoted 7 lines

It's good and proper behavior. However, Microsoft branded MBMs (including the latest one in Surface Go 3) fail until the kernel explicitly sets the input size.

This patch adds a new table and code changes that explicitly send the USB_CDC_SET_NTB_INPUT_SIZE command to support Microsoft branded MBMs.

Just for reference, are you allowed to disclose which chipsets these modems are based on?

Thanks,
Daniele

Quoted 77 lines
---
 drivers/net/usb/cdc_mbim.c  | 24 ++++++++++++++++++++++++
 drivers/net/usb/cdc_ncm.c   |  2 +-
 include/linux/usb/cdc_ncm.h |  1 +
 3 files changed, 26 insertions(+), 1 deletion(-)
drivers/net/usb/cdc_mbim.c +24 -0
index c89639381eca..c0c23cfc02a7 100644
@@ -618,6 +618,22 @@ static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
        .data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
 };
 
+/* Microsoft branded modems do not work properly without setting the input size
+ * explicitly in cdc_ncm_bind_common.
+ * CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY flag is used to set the input size
+ * during initialization.
+ */
+static const struct driver_info cdc_mbim_info_set_input_size_explicitly = {
+       .description = "CDC MBIM",
+       .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+       .bind = cdc_mbim_bind,
+       .unbind = cdc_mbim_unbind,
+       .manage_power = cdc_mbim_manage_power,
+       .rx_fixup = cdc_mbim_rx_fixup,
+       .tx_fixup = cdc_mbim_tx_fixup,
+       .data = CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY,
+};
+
 static const struct usb_device_id mbim_devs[] = {
        /* This duplicate NCM entry is intentional. MBIM devices can
         * be disguised as NCM by default, and this is necessary to
@@ -665,6 +681,14 @@ static const struct usb_device_id mbim_devs[] = {
          .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
        },
 
+       /* Some Microsoft branded mobile broadband modems used in the Surface
+        * seires are known to fail unless the input size is set explicitly.
+        * Applying it to all Microsoft branded MBMs.
+        */
+       { USB_VENDOR_AND_INTERFACE_INFO(0x045e, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+         .driver_info = (unsigned long)&cdc_mbim_info_set_input_size_explicitly,
+       },
+
        /* default entry */
        { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
          .driver_info = (unsigned long)&cdc_mbim_info_zlp,
drivers/net/usb/cdc_ncm.c +1 -1
index 8d5cbda33f66..915e29c987cb 100644
@@ -407,7 +407,7 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
        val = cdc_ncm_check_rx_max(dev, new_rx);
 
        /* inform device about NTB input size changes */
-       if (val != ctx->rx_max) {
+       if (val != ctx->rx_max || ctx->drvflags & CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY) {
                __le32 dwNtbInMaxSize = cpu_to_le32(val);
 
                dev_info(&dev->intf->dev, "setting rx_max = %u\n", val);
include/linux/usb/cdc_ncm.h +1 -1
index 2d207cb4837d..a24f84b31a54 100644
@@ -88,6 +88,7 @@
 #define CDC_NCM_FLAG_NDP_TO_END                        0x02    /* NDP is placed at end of frame */
 #define CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE  0x04    /* Avoid altsetting toggle during init */
 #define CDC_NCM_FLAG_PREFER_NTB32 0x08 /* prefer NDP32 over NDP16 */
+#define CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY        0x10    /* Set input size explicitly during init */
 
 #define cdc_ncm_comm_intf_is_mbim(x)  ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
                                       (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
--

2.30.2

#2 lore raw

Hello Daniele,

Quoted 6 lines · Daniele Palmas

Just for reference, are you allowed to disclose which chipsets these modems are based on?

Thanks,
Daniele

I'm not sure which chipsets are used for them. In the Windows environment, the information that I could find was Microsoft Surface Mobile Broadband Modem. Some people guess they are based on Qualcomm Snapdragon X16 and successors, but I could find no evidence about them.

If you know the way, would you tell me how I can find or confirm it?

Best regards,
Seunghun

#3 lore raw

Hello Seunghun,

Il giorno mer 3 ago 2022 alle ore 14:56 Seunghun Han <[email protected]> ha scritto:

Quoted 11 lines

Hello Daniele,

Quoted 6 lines · Daniele Palmas

Just for reference, are you allowed to disclose which chipsets these modems are based on?

Thanks,
Daniele

Quoted 8 lines

I'm not sure which chipsets are used for them. In the Windows environment, the information that I could find was Microsoft Surface Mobile Broadband Modem. Some people guess they are based on Qualcomm Snapdragon X16 and successors, but I could find no evidence about them.

If you know the way, would you tell me how I can find or confirm it?

Unfortunately I'm not aware of any specific place for that: I wrongly thought that you were involved in the development of the modem and you knew the chipset.

However, sometimes the name of the chipset is left in the firmware
revision: you can try looking if there's any hint in the output of the device caps request. If it's a Qualcomm modem it should probably also support QMI-over-MBIM service, so maybe you can also try a few DMS requests (--dms-get-software-version, --dms-get-revision...).

Sometimes also the USB descriptors can be useful.

Regards,
Daniele

Quoted 2 lines

Best regards,
Seunghun

#4 lore raw

Hello Daniele,

Quoted 4 lines · Daniele Palmas

Unfortunately I'm not aware of any specific place for that: I wrongly thought that you were involved in the development of the modem and you knew the chipset.

Thank you for thinking like that. However, I'm just a Linux lover and a Microsoft Surface user.

Quoted 7 lines

However, sometimes the name of the chipset is left in the firmware
revision: you can try looking if there's any hint in the output of the device caps request. If it's a Qualcomm modem it should probably also support QMI-over-MBIM service, so maybe you can also try a few DMS requests (--dms-get-software-version, --dms-get-revision...).

Sometimes also the USB descriptors can be useful.

According to your guides, I did get some useful information from my Surface Go 3 modem. Finally, it was based on a Qualcomm chip, and other Microsoft mobile broadband modems should be based on the Qualcomm chip. The test results on my Surface Go 3 are below.

==== Start of test results ====
$> lsusb
Bus 002 Device 004: ID 045e:09a5 Microsoft Corp. Surface

$> lsbusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
|__ Port 1: Dev 5, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 4: Dev 6, If 0, Class=Vendor Specific Class,
Driver=r8152, 5000M

    |__ Port 3: Dev 4, If 0, Class=Communications, Driver=cdc_mbim, 5000M
    |__ Port 3: Dev 4, If 1, Class=CDC Data, Driver=cdc_mbim, 5000M
    |__ Port 3: Dev 4, If 2, Class=Vendor Specific Class, Driver=, 5000M

$> qmicli --device=/dev/cdc-wdm3 --dms-get-manufacturer [/dev/cdc-wdm3] Device manufacturer retrieved:
Manufacturer: 'QUALCOMM INCORPORATED'

$> qmicli --device=/dev/cdc-wdm3 --dms-get-revision [/dev/cdc-wdm3] Device revision retrieved:
Revision: '2140-e88e4b-c8-00004.36 1 [May 17 2021 01:00:00]'

$> qmicli --device=/dev/cdc-wdm3 --dms-get-software-version [/dev/cdc-wdm3] Software version: 655_GEN_PACK-1.362573.1.400078.2

$> qmicli --device=/dev/cdc-wdm3 --dms-get-band-capabilities [/dev/cdc-wdm3] Device band capabilities retrieved:
Bands: 'wcdma-2100, wcdma-pcs-1900, wcdma-850-us, wcdma-800, wcdma-900' LTE bands: '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 19, 20, 25, 26, 28, 29, 30, 38, 39, 40, 41'
LTE bands (extended): '1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 19, 20, 25, 26, 28, 29, 30, 38, 39, 40, 41, 66'

$> qmicli --device=/dev/cdc-wdm3 --dms-get-capabilities [/dev/cdc-wdm3] Device capabilities retrieved:
Max TX channel rate: '50000000'
Max RX channel rate: '100000000'
Data Service: 'non-simultaneous-cs-ps'
SIM: 'supported'
Networks: 'umts, lte'
==== End of test results ====

Thank you for your help.

Best regards,
Seunghun

Quoted 3 lines

Regards,
Daniele

#5 lore raw
In reply to Seunghun Han

Does anyone have comments on my patch? If there are some points to improve, please let me know. I'm waiting for them.

Quoted 128 lines · Seunghun Han

Microsoft branded mobile broadband modems typically used in the Surface series don't work with the Linux kernel. When I query firmware information to the modem using the mbimcli tool, it always returns the Failure (0x02) value like below.

=== Start of the firmware id query ===
$> mbimcli -d /dev/cdc-wdm4 --ms-query-firmware-id -v

[26  Jul 2022, 05:24:07] [Debug] opening device...
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Queried max control message size: 4096
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Sent message...

<<<<<< RAW:
<<<<<< length = 16
<<<<<< data = 01:00:00:00:10:00:00:00:01:00:00:00:00:10:00:00

[26 Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Sent message (translated)... <<<<<< Header:

<<<<<<   length      = 16
<<<<<<   type        = open (0x00000001)
<<<<<<   transaction = 1

<<<<<< Contents:
<<<<<< max control transfer = 4096

[26 Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Received message...

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

RAW:
length = 16
data = 01:00:00:80:10:00:00:00:01:00:00:00:02:00:00:00

[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Received message...Message Type 80000001
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 864
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 897
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 923
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 930
[26  Jul 2022, 05:24:07] [Debug] [/dev/cdc-wdm4] Processing process_message 935
[26  Jul 2022, 05:24:07] [Debug] getting open done result failed: closed

error: couldn't open the MbimDevice: Failure
=== End of the firmware id query ===

After kernel debugging, I found that the modem reported that the dwNtbInMaxSize value of ncm_parm was 16384 during the initialization sequence.
So the cdc_ncm_update_rxtx_max() in cdc_ncm_bind_common() didn't send USB_CDC_SET_NTB_INPUT_SIZE command because the default input size was the same, 16384.

It's good and proper behavior. However, Microsoft branded MBMs (including the latest one in Surface Go 3) fail until the kernel explicitly sets the input size.

This patch adds a new table and code changes that explicitly send the USB_CDC_SET_NTB_INPUT_SIZE command to support Microsoft branded MBMs.

---
 drivers/net/usb/cdc_mbim.c  | 24 ++++++++++++++++++++++++
 drivers/net/usb/cdc_ncm.c   |  2 +-
 include/linux/usb/cdc_ncm.h |  1 +
 3 files changed, 26 insertions(+), 1 deletion(-)
drivers/net/usb/cdc_mbim.c +24 -0
index c89639381eca..c0c23cfc02a7 100644
@@ -618,6 +618,22 @@ static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
        .data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
 };
 
+/* Microsoft branded modems do not work properly without setting the input size
+ * explicitly in cdc_ncm_bind_common.
+ * CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY flag is used to set the input size
+ * during initialization.
+ */
+static const struct driver_info cdc_mbim_info_set_input_size_explicitly = {
+       .description = "CDC MBIM",
+       .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+       .bind = cdc_mbim_bind,
+       .unbind = cdc_mbim_unbind,
+       .manage_power = cdc_mbim_manage_power,
+       .rx_fixup = cdc_mbim_rx_fixup,
+       .tx_fixup = cdc_mbim_tx_fixup,
+       .data = CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY,
+};
+
 static const struct usb_device_id mbim_devs[] = {
        /* This duplicate NCM entry is intentional. MBIM devices can
         * be disguised as NCM by default, and this is necessary to
@@ -665,6 +681,14 @@ static const struct usb_device_id mbim_devs[] = {
          .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
        },
 
+       /* Some Microsoft branded mobile broadband modems used in the Surface
+        * seires are known to fail unless the input size is set explicitly.
+        * Applying it to all Microsoft branded MBMs.
+        */
+       { USB_VENDOR_AND_INTERFACE_INFO(0x045e, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+         .driver_info = (unsigned long)&cdc_mbim_info_set_input_size_explicitly,
+       },
+
        /* default entry */
        { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
          .driver_info = (unsigned long)&cdc_mbim_info_zlp,
drivers/net/usb/cdc_ncm.c +1 -1
index 8d5cbda33f66..915e29c987cb 100644
@@ -407,7 +407,7 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
        val = cdc_ncm_check_rx_max(dev, new_rx);
 
        /* inform device about NTB input size changes */
-       if (val != ctx->rx_max) {
+       if (val != ctx->rx_max || ctx->drvflags & CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY) {
                __le32 dwNtbInMaxSize = cpu_to_le32(val);
 
                dev_info(&dev->intf->dev, "setting rx_max = %u\n", val);
include/linux/usb/cdc_ncm.h +1 -1
index 2d207cb4837d..a24f84b31a54 100644
@@ -88,6 +88,7 @@
 #define CDC_NCM_FLAG_NDP_TO_END                        0x02    /* NDP is placed at end of frame */
 #define CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE  0x04    /* Avoid altsetting toggle during init */
 #define CDC_NCM_FLAG_PREFER_NTB32 0x08 /* prefer NDP32 over NDP16 */
+#define CDC_MBIM_FLAG_SET_INPUT_SIZE_EXPLICITLY        0x10    /* Set input size explicitly during init */
 
 #define cdc_ncm_comm_intf_is_mbim(x)  ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
                                       (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
--

2.30.2