gpio: Remove mvgpio driver
PATCH 1/1 gpio: Remove mvgpio driver
The last user of this driver was removed in commit dee08b1999e2 ("arm:
Remove gplugd board"). Remove the unused driver.
Signed-off-by Chris Packham <[email protected]>
---
drivers/gpio/Makefile | 1 - drivers/gpio/mvgpio.c | 97 ------------------------------------------- drivers/gpio/mvgpio.h | 53 ----------------------- 3 files changed, 151 deletions(-) delete mode 100644 drivers/gpio/mvgpio.c delete mode 100644 drivers/gpio/mvgpio.h
drivers/gpio/Makefile +0 -1
@@ -24,7 +24,6 @@ obj-$(CONFIG_INTEL_BROADWELL_GPIO) += intel_broadwell_gpio.o obj-$(CONFIG_IPROC_GPIO) += iproc_gpio.o obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o obj-$(CONFIG_KONA_GPIO) += kona_gpio.o -obj-$(CONFIG_MARVELL_GPIO) += mvgpio.o obj-$(CONFIG_MCP230XX_GPIO) += mcp230xx_gpio.o obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o obj-$(CONFIG_MXS_GPIO) += mxs_gpio.o
drivers/gpio/mvgpio.c deleted +0 -97
97 lines not on this page · raw message
drivers/gpio/mvgpio.h deleted +0 -53
53 lines not on this page · raw message
Signature · 1 line
2.37.1
Quoted 4 lines · On Thursday 04 August 2022 11:43:57 Chris Packham wrote:
The last user of this driver was removed in commit
dee08b1999e2("arm:
Remove gplugd board"). Remove the unused driver.Signed-off-by Chris Packham <[email protected]>
Acked-by Pali Rohár <[email protected]>
Quoted 186 lines
---
drivers/gpio/Makefile | 1 - drivers/gpio/mvgpio.c | 97 ------------------------------------------- drivers/gpio/mvgpio.h | 53 ----------------------- 3 files changed, 151 deletions(-) delete mode 100644 drivers/gpio/mvgpio.c delete mode 100644 drivers/gpio/mvgpio.hdrivers/gpio/Makefile +0
-1@@ -24,7 +24,6 @@ obj-$(CONFIG_INTEL_BROADWELL_GPIO) += intel_broadwell_gpio.o obj-$(CONFIG_IPROC_GPIO) += iproc_gpio.o obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o obj-$(CONFIG_KONA_GPIO) += kona_gpio.o -obj-$(CONFIG_MARVELL_GPIO) += mvgpio.o obj-$(CONFIG_MCP230XX_GPIO) += mcp230xx_gpio.o obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o obj-$(CONFIG_MXS_GPIO) += mxs_gpio.odrivers/gpio/mvgpio.c deleted +0
-97@@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* (C) Copyright 2011 -* eInfochips Ltd. <www.einfochips.com> -* Written-by: Ajay Bhargav <[email protected]> -* -* (C) Copyright 2010 -* Marvell Semiconductor <www.marvell.com> -*/ - -#include <common.h> -#include <malloc.h> -#include <asm/io.h> -#include <linux/errno.h> -#include "mvgpio.h" -#include <asm/gpio.h> - -#ifndef MV_MAX_GPIO -#define MV_MAX_GPIO 128 -#endif - -int gpio_request (unsigned gpio,const char *label) -{ -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO requested %d\n" , __func__, gpio); -return -1 ; - } -return 0 ; -} - -int gpio_free (unsigned gpio) -{ -return 0 ; -} - -int gpio_direction_input (unsigned gpio) -{ -struct gpio_reg *gpio_reg_bank; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gcdr); -return 0 ; -} - -int gpio_direction_output (unsigned gpio,int value) -{ -struct gpio_reg *gpio_reg_bank; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gsdr); -gpio_set_value (gpio, value); -return 0 ; -} - -int gpio_get_value (unsigned gpio) -{ -struct gpio_reg *gpio_reg_bank; -u32 gpio_val; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); - gpio_val =readl (&gpio_reg_bank->gplr); - -return GPIO_VAL (gpio, gpio_val); -} - -int gpio_set_value (unsigned gpio,int value) -{ -struct gpio_reg *gpio_reg_bank; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); -if (value) -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gpsr); -else -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gpcr); - -return 0 ; -}drivers/gpio/mvgpio.h deleted +0
-53@@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2011 -* eInfochips Ltd. <www.einfochips.com> -* Written-by: Ajay Bhargav <[email protected]> -* -* (C) Copyright 2010 -* Marvell Semiconductor <www.marvell.com> -*/ - -#ifndef __MVGPIO_H__ -#define __MVGPIO_H__ - -#include <common.h> - -/* -* GPIO Register map for Marvell SOCs -*/ -struct gpio_reg { -u32 gplr;/* Pin Level Register - 0x0000 */ -u32 pad0[2 ]; -u32 gpdr;/* Pin Direction Register - 0x000C */ -u32 pad1[2 ]; -u32 gpsr;/* Pin Output Set Register - 0x0018 */ -u32 pad2[2 ]; -u32 gpcr;/* Pin Output Clear Register - 0x0024 */ -u32 pad3[2 ]; -u32 grer;/* Rising-Edge Detect Enable Register - 0x0030 */ -u32 pad4[2 ]; -u32 gfer;/* Falling-Edge Detect Enable Register - 0x003C */ -u32 pad5[2 ]; -u32 gedr;/* Edge Detect Status Register - 0x0048 */ -u32 pad6[2 ]; -u32 gsdr;/* Bitwise Set of GPIO Direction Register - 0x0054 */ -u32 pad7[2 ]; -u32 gcdr;/* Bitwise Clear of GPIO Direction Register - 0x0060 */ -u32 pad8[2 ]; -u32 gsrer;/* Bitwise Set of Rising-Edge Detect Enable -Register - 0x006C */ -u32 pad9[2 ]; -u32 gcrer;/* Bitwise Clear of Rising-Edge Detect Enable -Register - 0x0078 */ -u32 pad10[2 ]; -u32 gsfer;/* Bitwise Set of Falling-Edge Detect Enable -Register - 0x0084 */ -u32 pad11[2 ]; -u32 gcfer;/* Bitwise Clear of Falling-Edge Detect Enable -Register - 0x0090 */ -u32 pad12[2 ]; -u32 apmask;/* Bitwise Mask of Edge Detect Register - 0x009C */ -}; - -#endif /* __MVGPIO_H__ */ Signature · 1 line
2.37.1
Quoted 4 lines · Chris Packham
The last user of this driver was removed in commit
dee08b1999e2("arm:
Remove gplugd board"). Remove the unused driver.Signed-off-by Chris Packham <[email protected]>
Applied to u-boot-marvell/master
Thanks,
Stefan
Quoted 173 lines
---
drivers/gpio/Makefile | 1 - drivers/gpio/mvgpio.c | 97 ------------------------------------------- drivers/gpio/mvgpio.h | 53 ----------------------- 3 files changed, 151 deletions(-)delete mode 100644
drivers/gpio/mvgpio.c
delete mode 100644drivers/gpio/mvgpio.hdrivers/gpio/Makefile +0
-1@@ -24,7 +24,6 @@ obj-$(CONFIG_INTEL_BROADWELL_GPIO) += intel_broadwell_gpio.o obj-$(CONFIG_IPROC_GPIO) += iproc_gpio.o obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o obj-$(CONFIG_KONA_GPIO) += kona_gpio.o -obj-$(CONFIG_MARVELL_GPIO) += mvgpio.o obj-$(CONFIG_MCP230XX_GPIO) += mcp230xx_gpio.o obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o obj-$(CONFIG_MXS_GPIO) += mxs_gpio.odrivers/gpio/mvgpio.c deleted +0
-97@@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* (C) Copyright 2011 -* eInfochips Ltd. <www.einfochips.com> -* Written-by: Ajay Bhargav <[email protected]> -* -* (C) Copyright 2010 -* Marvell Semiconductor <www.marvell.com> -*/ - -#include <common.h> -#include <malloc.h> -#include <asm/io.h> -#include <linux/errno.h> -#include "mvgpio.h" -#include <asm/gpio.h> - -#ifndef MV_MAX_GPIO -#define MV_MAX_GPIO 128 -#endif - -int gpio_request (unsigned gpio,const char *label) -{ -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO requested %d\n" , __func__, gpio); -return -1 ; - } -return 0 ; -} - -int gpio_free (unsigned gpio) -{ -return 0 ; -} - -int gpio_direction_input (unsigned gpio) -{ -struct gpio_reg *gpio_reg_bank; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gcdr); -return 0 ; -} - -int gpio_direction_output (unsigned gpio,int value) -{ -struct gpio_reg *gpio_reg_bank; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gsdr); -gpio_set_value (gpio, value); -return 0 ; -} - -int gpio_get_value (unsigned gpio) -{ -struct gpio_reg *gpio_reg_bank; -u32 gpio_val; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); - gpio_val =readl (&gpio_reg_bank->gplr); - -return GPIO_VAL (gpio, gpio_val); -} - -int gpio_set_value (unsigned gpio,int value) -{ -struct gpio_reg *gpio_reg_bank; - -if (gpio >=MV_MAX_GPIO ) { -printf ("%s: Invalid GPIO %d\n" , __func__, gpio); -return -1 ; - } - - gpio_reg_bank =get_gpio_base (GPIO_TO_REG (gpio)); -if (value) -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gpsr); -else -writel (GPIO_TO_BIT (gpio), &gpio_reg_bank->gpcr); - -return 0 ; -}drivers/gpio/mvgpio.h deleted +0
-43@@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2011 -* eInfochips Ltd. <www.einfochips.com> -* Written-by: Ajay Bhargav <[email protected]> -* -* (C) Copyright 2010 -* Marvell Semiconductor <www.marvell.com> -*/ - -#ifndef __MVGPIO_H__ -#define __MVGPIO_H__ - -#include <common.h> - -/* - * GPIO Register map for Marvell SOCs - */ -struct gpio_reg { - u32 gplr; /* Pin Level Register - 0x0000 */ - u32 pad0[2]; - u32 gpdr; /* Pin Direction Register - 0x000C */ - u32 pad1[2]; - u32 gpsr; /* Pin Output Set Register - 0x0018 */ - u32 pad2[2]; - u32 gpcr; /* Pin Output Clear Register - 0x0024 */ - u32 pad3[2]; - u32 grer; /* Rising-Edge Detect Enable Register - 0x0030 */ - u32 pad4[2]; - u32 gfer; /* Falling-Edge Detect Enable Register - 0x003C */ - u32 pad5[2]; - u32 gedr; /* Edge Detect Status Register - 0x0048 */ - u32 pad6[2]; - u32 gsdr; /* Bitwise Set of GPIO Direction Register - 0x0054 */ - u32 pad7[2]; - u32 gcdr; /* Bitwise Clear of GPIO Direction Register - 0x0060 */ - u32 pad8[2]; - u32 gsrer; /* Bitwise Set of Rising-Edge Detect Enable - Register - 0x006C */ - u32 pad9[2]; - u32 gcrer; /* Bitwise Clear of Rising-Edge Detect Enable - Register - 0x0078 */ - u32 pad10[2];
drivers/gpio/mvgpio.h line 53
Quoted 10 lines
drivers/gpio/mvgpio.h deleted +0
-10-u32 gsfer;/* Bitwise Set of Falling-Edge Detect Enable -Register - 0x0084 */ -u32 pad11[2 ]; -u32 gcfer;/* Bitwise Clear of Falling-Edge Detect Enable -Register - 0x0090 */ -u32 pad12[2 ]; - u32 apmask; /* Bitwise Mask of Edge Detect Register - 0x009C */ -}; - -#endif /* __MVGPIO_H__ */
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]