NIC vhost-vdpa state restore via Shadow CVQ
v7 cover NIC vhost-vdpa state restore via Shadow CVQ
CVQ of net vhost-vdpa devices can be intercepted since the work of [1]. The virtio-net device model is updated. The migration was blocked because although the state can be megrated between VMM it was not possible to restore on the destination NIC.
This series add support for SVQ to inject external messages without the guest's knowledge, so before the guest is resumed all the guest visible state is restored. It is done using standard CVQ messages, so the vhost-vdpa device does not need to learn how to restore it: As long as they have the feature, they know how to handle it.
This series needs fix [1] to be applied to achieve full live migration.
Thanks!
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-08/msg00325.html
v7:
- Remove accidental double free.
v6:
- Move map and unmap of the buffers to the start and stop of the device. This implies more callbacks on NetClientInfo, but simplifies the SVQ CVQ code.
- Not assume that in buffer is sizeof(virtio_net_ctrl_ack) in vhost_vdpa_net_cvq_add
- Reduce the number of changes from previous versions
- Delete unused memory barrier
v5:
- Rename s/start/load/
- Use independent NetClientInfo to only add load callback on cvq.
- Accept out sg instead of dev_buffers[] at vhost_vdpa_net_cvq_map_elem
- Use only out size instead of iovec dev_buffers to know if the descriptor is effectively available, allowing to delete artificial !NULL VirtQueueElement on vhost_svq_add call.
v4:
- Actually use NetClientInfo callback.
v3:
- Route vhost-vdpa start code through NetClientInfo callback.
- Delete extra vhost_net_stop_one() call.
v2:
- Fix SIGSEGV dereferencing SVQ when not in svq mode
v1 from RFC:
- Do not reorder DRIVER_OK & enable patches.
- Delete leftovers
Eugenio Pérez (12):
vhost: stop transfer elem ownership in vhost_handle_guest_kick
vhost: use SVQ element ndescs instead of opaque data for desc
validation
vhost: Delete useless read memory barrier
vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
vhost_net: Add NetClientInfo prepare callback
vhost_net: Add NetClientInfo stop callback
vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
vdpa: Move command buffers map to start of net device
vdpa: Extract vhost_vdpa_net_cvq_add from
vhost_vdpa_net_handle_ctrl_avail
vhost_net: add NetClientState->load() callback
vdpa: Add virtio-net mac address via CVQ at start
vdpa: Delete CVQ migration blocker
include/hw/virtio/vhost-vdpa.h | 1 - include/net/net.h | 6 + hw/net/vhost_net.c | 17 +++ hw/virtio/vhost-shadow-virtqueue.c | 27 ++-- hw/virtio/vhost-vdpa.c | 14 -- net/vhost-vdpa.c | 227 ++++++++++++++++++----------- 6 files changed, 180 insertions(+), 112 deletions(-)
Signature · 1 line
2.31.1
PATCH v7 1/12 vhost: stop transfer elem ownership in vhost_handle_guest_kick
It was easier to allow vhost_svq_add to handle the memory. Now that we will allow qemu to add elements to a SVQ without the guest's knowledge, it's better to handle it in the caller.
--- hw/virtio/vhost-shadow-virtqueue.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
hw/virtio/vhost-shadow-virtqueue.c +4 -6
@@ -233,9 +233,6 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)/** * Add an element to a SVQ. * -* The caller must check that there is enough slots for the new element. It -* takes ownership of the element: In case of failure not ENOSPC, it is free. -* * Return -EINVAL if element is invalid, -ENOSPC if dev queue is full */ int vhost_svq_add(VhostShadowVirtqueue *svq, const struct iovec *out_sg,
@@ -252,7 +249,6 @@ int vhost_svq_add(VhostShadowVirtqueue *svq, const struct iovec *out_sg, ok =vhost_svq_add_split (svq, out_sg, out_num, in_sg, in_num, &qemu_head);if (unlikely (!ok)) { -g_free (elem);return -EINVAL ; }
@@ -293,7 +289,7 @@ static void vhost_handle_guest_kick(VhostShadowVirtqueue *svq)virtio_queue_set_notification (svq->vq, false);while (true) { -VirtQueueElement *elem; + g_autofree VirtQueueElement *elem;int r;if (svq->next_guest_avail_elem) {
@@ -324,12 +320,14 @@ static void vhost_handle_guest_kick(VhostShadowVirtqueue *svq)* queue the current guest descriptor and ignore kicks * until some elements are used. */ - svq->next_guest_avail_elem = elem; + svq->next_guest_avail_elem =g_steal_pointer (&elem); }/* VQ is full or broken, just return and ignore kicks */ return ; } +/* elem belongs to SVQ or external caller now */ + elem =NULL ; }virtio_queue_set_notification (svq->vq, true);
Signature · 1 line
2.31.1
Re: [PATCH v7 01/12] vhost: stop transfer elem ownership in vhost_handle_guest_kick
Quoted 6 lines · Eugenio Pérez
It was easier to allow
vhost_svq_addto handle the memory. Now that we will allow qemu to add elements to a SVQ without the guest's knowledge, it's better to handle it in the caller.Signed-off-by Eugenio Pérez <[email protected]>
Quoted 54 lines
--- hw/virtio/vhost-shadow-virtqueue.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)hw/virtio/vhost-shadow-virtqueue.c +4
-7@@ -233,9 +233,6 @@ static void vhost_svq_kick(VhostShadowVirtqueue *svq)/** * Add an element to a SVQ. * -* The caller must check that there is enough slots for the new element. It -* takes ownership of the element: In case of failure not ENOSPC, it is free. -* * Return -EINVAL if element is invalid, -ENOSPC if dev queue is full */ int vhost_svq_add(VhostShadowVirtqueue *svq, const struct iovec *out_sg,@@ -252,7 +249,6 @@ int vhost_svq_add(VhostShadowVirtqueue *svq, const struct iovec *out_sg, ok =vhost_svq_add_split (svq, out_sg, out_num, in_sg, in_num, &qemu_head);if (unlikely (!ok)) { -g_free (elem);return -EINVAL ; }@@ -293,7 +289,7 @@ static void vhost_handle_guest_kick(VhostShadowVirtqueue *svq)virtio_queue_set_notification (svq->vq, false);while (true) { -VirtQueueElement *elem; + g_autofree VirtQueueElement *elem;int r;if (svq->next_guest_avail_elem) {@@ -324,12 +320,14 @@ static void vhost_handle_guest_kick(VhostShadowVirtqueue *svq)* queue the current guest descriptor and ignore kicks * until some elements are used. */ - svq->next_guest_avail_elem = elem; + svq->next_guest_avail_elem =g_steal_pointer (&elem); }/* VQ is full or broken, just return and ignore kicks */ return ; } +/* elem belongs to SVQ or external caller now */ + elem =NULL ; }virtio_queue_set_notification (svq->vq, true); --2.31.1
PATCH v7 2/12 vhost: use SVQ element ndescs instead of opaque data for desc validation
In reply to Eugenio PérezSince we're going to allow SVQ to add elements without the guest's knowledge and without its own VirtQueueElement, it's easier to check if an element is a valid head checking a different thing than the VirtQueueElement.
--- hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
hw/virtio/vhost-shadow-virtqueue.c +2 -1
@@ -414,7 +414,7 @@ static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq,return NULL ; } -if (unlikely (!svq->desc_state[used_elem.id].elem)) { +if (unlikely (!svq->desc_state[used_elem.id].ndescs)) {qemu_log_mask (LOG_GUEST_ERROR ,"Device %s says index %u is used, but it was not available" , svq->vdev->name, used_elem.id);
@@ -422,6 +422,7 @@ static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq, } num = svq->desc_state[used_elem.id].ndescs; + svq->desc_state[used_elem.id].ndescs =0 ; last_used_chain =vhost_svq_last_desc_of_chain (svq, num, used_elem.id); svq->desc_next[last_used_chain] = svq->free_head; svq->free_head = used_elem.id;
Signature · 1 line
2.31.1
Re: [PATCH v7 02/12] vhost: use SVQ element ndescs instead of opaque data for desc validation
Quoted 8 lines · Eugenio Pérez
Since we're going to allow SVQ to add elements without the guest's knowledge and without its own VirtQueueElement, it's easier to check if an element is a valid head checking a different thing than the VirtQueueElement.
Signed-off-by Eugenio Pérez <[email protected]>---
Quoted 27 lines
hw/virtio/vhost-shadow-virtqueue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/virtio/vhost-shadow-virtqueue.c +2
-2@@ -414,7 +414,7 @@ static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq,return NULL ; } -if (unlikely (!svq->desc_state[used_elem.id].elem)) { +if (unlikely (!svq->desc_state[used_elem.id].ndescs)) {qemu_log_mask (LOG_GUEST_ERROR ,"Device %s says index %u is used, but it was not available" , svq->vdev->name, used_elem.id);@@ -422,6 +422,7 @@ static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq, } num = svq->desc_state[used_elem.id].ndescs; + svq->desc_state[used_elem.id].ndescs =0 ; last_used_chain =vhost_svq_last_desc_of_chain (svq, num, used_elem.id); svq->desc_next[last_used_chain] = svq->free_head; svq->free_head = used_elem.id; --2.31.1
PATCH v7 3/12 vhost: Delete useless read memory barrier
In reply to Eugenio PérezAs discussed in previous series [1], this memory barrier is useless with the atomic read of used idx at vhost_svq_more_used. Deleting it.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg02616.html
--- hw/virtio/vhost-shadow-virtqueue.c | 3 --- 1 file changed, 3 deletions(-)
hw/virtio/vhost-shadow-virtqueue.c +0 -3
@@ -509,9 +509,6 @@ size_t vhost_svq_poll(VhostShadowVirtqueue *svq)if (unlikely (g_get_monotonic_time () - start_us >10e6 )) {return 0 ; } - -/* Make sure we read new used_idx */ -smp_rmb (); }while (true); }
Signature · 1 line
2.31.1
Re: [PATCH v7 03/12] vhost: Delete useless read memory barrier
Quoted 7 lines · Eugenio Pérez
As discussed in previous series [1], this memory barrier is useless with the atomic read of used idx at
vhost_svq_more_used. Deleting it.[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg02616.html
Signed-off-by Eugenio Pérez <[email protected]>
Quoted 21 lines
--- hw/virtio/vhost-shadow-virtqueue.c | 3 --- 1 file changed, 3 deletions(-)hw/virtio/vhost-shadow-virtqueue.c +0
-4@@ -509,9 +509,6 @@ size_t vhost_svq_poll(VhostShadowVirtqueue *svq)if (unlikely (g_get_monotonic_time () - start_us >10e6 )) {return 0 ; } - -/* Make sure we read new used_idx */ -smp_rmb (); }while (true); } --2.31.1
PATCH v7 4/12 vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
In reply to Eugenio PérezSince QEMU will be able to inject new elements on CVQ to restore the state, we need not to depend on a VirtQueueElement to know if a new element has been used by the device or not. Instead of check that, check if there are new elements only using used idx on vhost_svq_flush.
---
v6: Change less from the previous function
--- hw/virtio/vhost-shadow-virtqueue.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
hw/virtio/vhost-shadow-virtqueue.c +7 -4
@@ -499,17 +499,20 @@ static void vhost_svq_flush(VhostShadowVirtqueue *svq,size_t vhost_svq_poll (VhostShadowVirtqueue *svq) {int64_t start_us =g_get_monotonic_time (); +uint32_t len; +do { -uint32_t len; -VirtQueueElement *elem =vhost_svq_get_buf (svq, &len); -if (elem) { -return len; +if (vhost_svq_more_used (svq)) { +break ; }if (unlikely (g_get_monotonic_time () - start_us >10e6 )) {return 0 ; } }while (true); + +vhost_svq_get_buf (svq, &len); +return len; }/**
Signature · 1 line
2.31.1
Re: [PATCH v7 04/12] vhost: Do not depend on !NULL VirtQueueElement on vhost_svq_flush
Quoted 8 lines · Eugenio Pérez
Since QEMU will be able to inject new elements on CVQ to restore the state, we need not to depend on a VirtQueueElement to know if a new element has been used by the device or not. Instead of check that, check if there are new elements only using used idx on
vhost_svq_flush.Signed-off-by Eugenio Pérez <[email protected]>---
Quoted 37 lines
v6: Change less from the previous function
--- hw/virtio/vhost-shadow-virtqueue.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)hw/virtio/vhost-shadow-virtqueue.c +7
-5@@ -499,17 +499,20 @@ static void vhost_svq_flush(VhostShadowVirtqueue *svq,size_t vhost_svq_poll (VhostShadowVirtqueue *svq) {int64_t start_us =g_get_monotonic_time (); +uint32_t len; +do { -uint32_t len; -VirtQueueElement *elem =vhost_svq_get_buf (svq, &len); -if (elem) { -return len; +if (vhost_svq_more_used (svq)) { +break ; }if (unlikely (g_get_monotonic_time () - start_us >10e6 )) {return 0 ; } }while (true); + +vhost_svq_get_buf (svq, &len); +return len; }/** -- 2.31.1
PATCH v7 5/12 vhost_net: Add NetClientInfo prepare callback
In reply to Eugenio PérezThis is used by the backend to perform actions before the device is started.
In particular, vdpa net use it to map CVQ buffers to the device, so it can send control commands using them.
--- include/net/net.h | 2 ++ hw/net/vhost_net.c | 7 +++++++ 2 files changed, 9 insertions(+)
include/net/net.h +2 -0
@@ -44,6 +44,7 @@ typedef struct NICConf {typedef void (NetPoll )(NetClientState *,bool enable);typedef bool (NetCanReceive )(NetClientState *); +typedef int (NetPrepare )(NetClientState *);typedef ssize_t (NetReceive )(NetClientState *,const uint8_t *,size_t );typedef ssize_t (NetReceiveIOV )(NetClientState *,const struct iovec *,int );typedef void (NetCleanup ) (NetClientState *);
@@ -71,6 +72,7 @@ typedef struct NetClientInfo {NetReceive *receive_raw;NetReceiveIOV *receive_iov;NetCanReceive *can_receive; +NetPrepare *prepare;NetCleanup *cleanup;LinkStatusChanged *link_status_changed;QueryRxFilter *query_rx_filter;
hw/net/vhost_net.c +7 -0
@@ -244,6 +244,13 @@ static int vhost_net_start_one(struct vhost_net *net,struct vhost_vring_file file = { };int r; +if (net->nc->info->prepare) { + r = net->nc->info->prepare (net->nc); +if (r <0 ) { +return r; + } + } + r =vhost_dev_enable_notifiers (&net->dev, dev);if (r <0 ) { goto fail_notifiers;
Signature · 1 line
2.31.1
Re: [PATCH v7 05/12] vhost_net: Add NetClientInfo prepare callback
Quoted 26 lines · Eugenio Pérez
This is used by the backend to perform actions before the device is started.
In particular, vdpa net use it to map CVQ buffers to the device, so it can send control commands using them.
Signed-off-by Eugenio Pérez <[email protected]>--- include/net/net.h | 2 ++ hw/net/vhost_net.c | 7 +++++++ 2 files changed, 9 insertions(+)include/net/net.h +1
-0@@ -44,6 +44,7 @@ typedef struct NICConf {typedef void (NetPoll )(NetClientState *,bool enable);typedef bool (NetCanReceive )(NetClientState *); +typedef int (NetPrepare )(NetClientState *);typedef ssize_t (NetReceive )(NetClientState *,const uint8_t *,size_t );typedef ssize_t (NetReceiveIOV )(NetClientState *,const struct iovec *,int );typedef void (NetCleanup ) (NetClientState *);
include/net/net.h typedef struct NetClientInfo { · line 75
Quoted 4 lines
include/net/net.h +1
-0@@ -71,6 +72,7 @@ typedef struct NetClientInfo {NetReceive *receive_raw;NetReceiveIOV *receive_iov;NetCanReceive *can_receive; +NetPrepare *prepare;
So it looks to me the function is paired with a stop that is introduced in the following patch.
Maybe we should use "start/stop" instead of "prepare/stop"?
Thanks
Quoted 24 lines
include/net/net.h +0
-0NetCleanup *cleanup;LinkStatusChanged *link_status_changed;QueryRxFilter *query_rx_filter;hw/net/vhost_net.c +7
-1@@ -244,6 +244,13 @@ static int vhost_net_start_one(struct vhost_net *net,struct vhost_vring_file file = { };int r; +if (net->nc->info->prepare) { + r = net->nc->info->prepare (net->nc); +if (r <0 ) { +return r; + } + } + r =vhost_dev_enable_notifiers (&net->dev, dev);if (r <0 ) { goto fail_notifiers; --2.31.1
Re: [PATCH v7 05/12] vhost_net: Add NetClientInfo prepare callback
Quoted 36 lines · Jason Wang
Quoted 26 lines · Eugenio Pérez
This is used by the backend to perform actions before the device is started.
In particular, vdpa net use it to map CVQ buffers to the device, so it can send control commands using them.
Signed-off-by Eugenio Pérez <[email protected]>--- include/net/net.h | 2 ++ hw/net/vhost_net.c | 7 +++++++ 2 files changed, 9 insertions(+)include/net/net.h +1
-0@@ -44,6 +44,7 @@ typedef struct NICConf {typedef void (NetPoll )(NetClientState *,bool enable);typedef bool (NetCanReceive )(NetClientState *); +typedef int (NetPrepare )(NetClientState *);typedef ssize_t (NetReceive )(NetClientState *,const uint8_t *,size_t );typedef ssize_t (NetReceiveIOV )(NetClientState *,const struct iovec *,int );typedef void (NetCleanup ) (NetClientState *);include/net/net.h typedef struct NetClientInfo { · line 75
Quoted 4 lines
include/net/net.h +1
-0@@ -71,6 +72,7 @@ typedef struct NetClientInfo {NetReceive *receive_raw;NetReceiveIOV *receive_iov;NetCanReceive *can_receive; +NetPrepare *prepare;So it looks to me the function is paired with a stop that is introduced in the following patch.
Quoted 2 lines
Maybe we should use "start/stop" instead of "prepare/stop"?
Sure, I can prepare the next series with it.
Thanks!
Quoted 27 lines
Thanks
Quoted 24 lines
include/net/net.h +0
-0NetCleanup *cleanup;LinkStatusChanged *link_status_changed;QueryRxFilter *query_rx_filter;hw/net/vhost_net.c +7
-1@@ -244,6 +244,13 @@ static int vhost_net_start_one(struct vhost_net *net,struct vhost_vring_file file = { };int r; +if (net->nc->info->prepare) { + r = net->nc->info->prepare (net->nc); +if (r <0 ) { +return r; + } + } + r =vhost_dev_enable_notifiers (&net->dev, dev);if (r <0 ) { goto fail_notifiers; --2.31.1
PATCH v7 6/12 vhost_net: Add NetClientInfo stop callback
In reply to Eugenio PérezUsed by the backend to perform actions after the device is stopped.
In particular, vdpa net use it to unmap CVQ buffers to the device, cleaning the actions performend in prepare().
--- include/net/net.h | 2 ++ hw/net/vhost_net.c | 3 +++ 2 files changed, 5 insertions(+)
include/net/net.h +2 -0
@@ -45,6 +45,7 @@ typedef struct NICConf {typedef void (NetPoll )(NetClientState *,bool enable);typedef bool (NetCanReceive )(NetClientState *);typedef int (NetPrepare )(NetClientState *); +typedef void (NetStop )(NetClientState *);typedef ssize_t (NetReceive )(NetClientState *,const uint8_t *,size_t );typedef ssize_t (NetReceiveIOV )(NetClientState *,const struct iovec *,int );typedef void (NetCleanup ) (NetClientState *);
@@ -73,6 +74,7 @@ typedef struct NetClientInfo {NetReceiveIOV *receive_iov;NetCanReceive *can_receive;NetPrepare *prepare; +NetStop *stop;NetCleanup *cleanup;LinkStatusChanged *link_status_changed;QueryRxFilter *query_rx_filter;
hw/net/vhost_net.c +3 -0
@@ -320,6 +320,9 @@ static void vhost_net_stop_one(struct vhost_net *net, net->nc->info->poll (net->nc, true); }vhost_dev_stop (&net->dev, dev); +if (net->nc->info->stop) { + net->nc->info->stop (net->nc); + }vhost_dev_disable_notifiers (&net->dev, dev); }
Signature · 1 line
2.31.1
PATCH v7 7/12 vdpa: add net_vhost_vdpa_cvq_info NetClientInfo
In reply to Eugenio PérezNext patches will add a new info callback to restore NIC status through CVQ. Since only the CVQ vhost device is needed, create it with a new NetClientInfo.
---
v5: Create a new NetClientInfo instead of reusing the dataplane one.
--- net/vhost-vdpa.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
net/vhost-vdpa.c +11 -1
@@ -334,6 +334,16 @@ static bool vhost_vdpa_net_cvq_map_elem(VhostVDPAState *s,return true; } +static NetClientInfo net_vhost_vdpa_cvq_info = { + .type =NET_CLIENT_DRIVER_VHOST_VDPA , + .size =sizeof (VhostVDPAState), + .receive = vhost_vdpa_receive, + .cleanup = vhost_vdpa_cleanup, + .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, + .has_ufo = vhost_vdpa_has_ufo, + .check_peer_type = vhost_vdpa_check_peer_type, +}; +/** * Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model.
@@ -475,7 +485,7 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer, nc =qemu_new_net_client (&net_vhost_vdpa_info, peer, device, name); }else { - nc =qemu_new_net_control_client (&net_vhost_vdpa_info, peer, + nc =qemu_new_net_control_client (&net_vhost_vdpa_cvq_info, peer, device, name); }snprintf (nc->info_str,sizeof (nc->info_str),TYPE_VHOST_VDPA );
Signature · 1 line
2.31.1
PATCH v7 8/12 vdpa: Move command buffers map to start of net device
In reply to Eugenio PérezAs this series will reuse them to restore the device state at the end of a migration (or a device start), let's allocate only once at the device start so we don't duplicate their map and unmap.
--- net/vhost-vdpa.c | 123 ++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 65 deletions(-)
net/vhost-vdpa.c +58 -65
@@ -263,29 +263,20 @@ static size_t vhost_vdpa_net_cvq_cmd_page_len(void)return ROUND_UP (vhost_vdpa_net_cvq_cmd_len (),qemu_real_host_page_size ()); } -/** Copy and map a guest buffer. */ -static bool vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v, -const struct iovec *out_data, -size_t out_num,size_t data_len,void *buf, -size_t *written,bool write) +/** Map CVQ buffer. */ +static int vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v,void *buf,size_t size, +bool write) {DMAMap map = {};int r; -if (unlikely (!data_len)) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: invalid legnth of %s buffer\n" , - __func__, write ?"in" :"out" ); -return false; - } - - *written =iov_to_buf (out_data, out_num,0 , buf, data_len); map.translated_addr = (hwaddr )(uintptr_t )buf; - map.size =vhost_vdpa_net_cvq_cmd_page_len () -1 ; + map.size = size -1 ; map.perm = write ?IOMMU_RW :IOMMU_RO , r =vhost_iova_tree_map_alloc (v->iova_tree, &map);if (unlikely (r !=IOVA_OK )) {error_report ("Cannot map injected element" ); -return false; +return r; } r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,
@@ -294,50 +285,58 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, goto dma_map_err; } -return true; +return 0 ; dma_map_err:vhost_iova_tree_remove (v->iova_tree, &map); -return false; +return r; } -/** -* Copy the guest element into a dedicated buffer suitable to be sent to NIC -* -* @iov: [0] is the out buffer, [1] is the in one -*/ -static bool vhost_vdpa_net_cvq_map_elem (VhostVDPAState *s, -VirtQueueElement *elem, -struct iovec *iov) +static int vhost_vdpa_net_cvq_prepare (NetClientState *nc) { -size_t in_copied; -bool ok; +VhostVDPAState *s; +int r; - iov[0 ].iov_base = s->cvq_cmd_out_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, elem->out_sg, elem->out_num, -vhost_vdpa_net_cvq_cmd_len (), iov[0 ].iov_base, - &iov[0 ].iov_len, false); -if (unlikely (!ok)) { -return false; +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + + s =DO_UPCAST (VhostVDPAState, nc, nc); +if (!s->vhost_vdpa.shadow_vqs_enabled) { +return 0 ; } - iov[1 ].iov_base = s->cvq_cmd_in_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa,NULL ,0 , -sizeof (virtio_net_ctrl_ack), iov[1 ].iov_base, - &in_copied, true); -if (unlikely (!ok)) { + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), false); +if (unlikely (r <0 )) { +return r; + } + + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), true); +if (unlikely (r <0 )) {vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); -return false; } - iov[1 ].iov_len =sizeof (virtio_net_ctrl_ack); -return true; +return r; +} + +static void vhost_vdpa_net_cvq_stop (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (s->vhost_vdpa.shadow_vqs_enabled) { +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer); + } }static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, + .prepare = vhost_vdpa_net_cvq_prepare, + .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, .has_ufo = vhost_vdpa_has_ufo,
@@ -348,19 +347,17 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {* Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model. */ -static bool vhost_vdpa_net_cvq_validate_cmd (const struct iovec *out, -size_t out_num) +static bool vhost_vdpa_net_cvq_validate_cmd (const void *out_buf,size_t len) {struct virtio_net_ctrl_hdr ctrl; -size_t n; - n =iov_to_buf (out, out_num,0 , &ctrl,sizeof (ctrl)); -if (unlikely (n <sizeof (ctrl))) { +if (unlikely (len <sizeof (ctrl))) {qemu_log_mask (LOG_GUEST_ERROR , -"%s: invalid legnth of out buffer %zu\n" , __func__, n); +"%s: invalid legnth of out buffer %zu\n" , __func__, len);return false; } +memcpy (&ctrl, out_buf,sizeof (ctrl));switch (ctrl.class) {case VIRTIO_NET_CTRL_MAC :switch (ctrl.cmd) {
@@ -392,10 +389,14 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,VhostVDPAState *s = opaque;size_t in_len, dev_written;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ; -/* out and in buffers sent to the device */ -struct iovec dev_buffers[2 ] = { - { .iov_base = s->cvq_cmd_out_buffer }, - { .iov_base = s->cvq_cmd_in_buffer }, +/* Out buffer sent to both the vdpa device and the device model */ +struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + }; +/* In buffer sent to the device */ +const struct iovec dev_in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), };/* in buffer used for device model */ const struct iovec in = {
@@ -405,17 +406,15 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,int r = -EINVAL ;bool ok; - ok =vhost_vdpa_net_cvq_map_elem (s, elem, dev_buffers); -if (unlikely (!ok)) { - goto out; - } - - ok =vhost_vdpa_net_cvq_validate_cmd (&dev_buffers[0 ],1 ); + out.iov_len =iov_to_buf (elem->out_sg, elem->out_num,0 , + s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_len ()); + ok =vhost_vdpa_net_cvq_validate_cmd (s->cvq_cmd_out_buffer, out.iov_len);if (unlikely (!ok)) { goto out; } - r =vhost_svq_add (svq, &dev_buffers[0 ],1 , &dev_buffers[1 ],1 , elem); + r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem);if (unlikely (r !=0 )) {if (unlikely (r == -ENOSPC )) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",
@@ -435,13 +434,13 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } -memcpy (&status, dev_buffers[1 ].iov_base,sizeof (status)); +memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { goto out; } status =VIRTIO_NET_ERR ; -virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , dev_buffers,1 ); +virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , &out,1 );if (status !=VIRTIO_NET_OK ) {error_report ("Bad CVQ processing in model" ); }
@@ -454,12 +453,6 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -if (dev_buffers[0 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[0 ].iov_base); - } -if (dev_buffers[1 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[1 ].iov_base); - }return r; }
Signature · 1 line
2.31.1
Re: [PATCH v7 08/12] vdpa: Move command buffers map to start of net device
Quoted 30 lines · Eugenio Pérez
As this series will reuse them to restore the device state at the end of a migration (or a device start), let's allocate only once at the device start so we don't duplicate their map and unmap.
Signed-off-by Eugenio Pérez <[email protected]>--- net/vhost-vdpa.c | 123 ++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 65 deletions(-)net/vhost-vdpa.c +3
-5@@ -263,29 +263,20 @@ static size_t vhost_vdpa_net_cvq_cmd_page_len(void)return ROUND_UP (vhost_vdpa_net_cvq_cmd_len (),qemu_real_host_page_size ()); } -/** Copy and map a guest buffer. */ -static bool vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v, -const struct iovec *out_data, -size_t out_num,size_t data_len,void *buf, -size_t *written,bool write) +/** Map CVQ buffer. */ +static int vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v,void *buf,size_t size, +bool write) {DMAMap map = {};int r;
net/vhost-vdpa.c static size_t vhost_vdpa_net_cvq_cmd_page_len(void) · line 274
Quoted 10 lines
net/vhost-vdpa.c +1
-8-if (unlikely (!data_len)) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: invalid legnth of %s buffer\n" , - __func__, write ?"in" :"out" ); -return false; - } - - *written =iov_to_buf (out_data, out_num,0 , buf, data_len); map.translated_addr = (hwaddr )(uintptr_t )buf; - map.size =vhost_vdpa_net_cvq_cmd_page_len () -1 ; + map.size = size -1 ;
Just noticed this, I think I've asked for the reason before but I don't remember the answer.
But it looks like a hint of a defect of the current API design.
Thanks
Quoted 192 lines
net/vhost-vdpa.c +54
-53map.perm = write ?IOMMU_RW :IOMMU_RO , r =vhost_iova_tree_map_alloc (v->iova_tree, &map);if (unlikely (r !=IOVA_OK )) {error_report ("Cannot map injected element" ); -return false; +return r; } r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,@@ -294,50 +285,58 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, goto dma_map_err; } -return true; +return 0 ; dma_map_err:vhost_iova_tree_remove (v->iova_tree, &map); -return false; +return r; } -/** -* Copy the guest element into a dedicated buffer suitable to be sent to NIC -* -* @iov: [0] is the out buffer, [1] is the in one -*/ -static bool vhost_vdpa_net_cvq_map_elem (VhostVDPAState *s, -VirtQueueElement *elem, -struct iovec *iov) +static int vhost_vdpa_net_cvq_prepare (NetClientState *nc) { -size_t in_copied; -bool ok; +VhostVDPAState *s; +int r; - iov[0 ].iov_base = s->cvq_cmd_out_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, elem->out_sg, elem->out_num, -vhost_vdpa_net_cvq_cmd_len (), iov[0 ].iov_base, - &iov[0 ].iov_len, false); -if (unlikely (!ok)) { -return false; +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + + s =DO_UPCAST (VhostVDPAState, nc, nc); +if (!s->vhost_vdpa.shadow_vqs_enabled) { +return 0 ; } - iov[1 ].iov_base = s->cvq_cmd_in_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa,NULL ,0 , -sizeof (virtio_net_ctrl_ack), iov[1 ].iov_base, - &in_copied, true); -if (unlikely (!ok)) { + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), false); +if (unlikely (r <0 )) { +return r; + } + + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), true); +if (unlikely (r <0 )) {vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); -return false; } - iov[1 ].iov_len =sizeof (virtio_net_ctrl_ack); -return true; +return r; +} + +static void vhost_vdpa_net_cvq_stop (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (s->vhost_vdpa.shadow_vqs_enabled) { +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer); + } }static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, + .prepare = vhost_vdpa_net_cvq_prepare, + .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, .has_ufo = vhost_vdpa_has_ufo,@@ -348,19 +347,17 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {* Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model. */ -static bool vhost_vdpa_net_cvq_validate_cmd (const struct iovec *out, -size_t out_num) +static bool vhost_vdpa_net_cvq_validate_cmd (const void *out_buf,size_t len) {struct virtio_net_ctrl_hdr ctrl; -size_t n; - n =iov_to_buf (out, out_num,0 , &ctrl,sizeof (ctrl)); -if (unlikely (n <sizeof (ctrl))) { +if (unlikely (len <sizeof (ctrl))) {qemu_log_mask (LOG_GUEST_ERROR , -"%s: invalid legnth of out buffer %zu\n" , __func__, n); +"%s: invalid legnth of out buffer %zu\n" , __func__, len);return false; } +memcpy (&ctrl, out_buf,sizeof (ctrl));switch (ctrl.class) {case VIRTIO_NET_CTRL_MAC :switch (ctrl.cmd) {@@ -392,10 +389,14 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,VhostVDPAState *s = opaque;size_t in_len, dev_written;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ; -/* out and in buffers sent to the device */ -struct iovec dev_buffers[2 ] = { - { .iov_base = s->cvq_cmd_out_buffer }, - { .iov_base = s->cvq_cmd_in_buffer }, +/* Out buffer sent to both the vdpa device and the device model */ +struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + }; +/* In buffer sent to the device */ +const struct iovec dev_in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), };/* in buffer used for device model */ const struct iovec in = {@@ -405,17 +406,15 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,int r = -EINVAL ;bool ok; - ok =vhost_vdpa_net_cvq_map_elem (s, elem, dev_buffers); -if (unlikely (!ok)) { - goto out; - } - - ok =vhost_vdpa_net_cvq_validate_cmd (&dev_buffers[0 ],1 ); + out.iov_len =iov_to_buf (elem->out_sg, elem->out_num,0 , + s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_len ()); + ok =vhost_vdpa_net_cvq_validate_cmd (s->cvq_cmd_out_buffer, out.iov_len);if (unlikely (!ok)) { goto out; } - r =vhost_svq_add (svq, &dev_buffers[0 ],1 , &dev_buffers[1 ],1 , elem); + r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem);if (unlikely (r !=0 )) {if (unlikely (r == -ENOSPC )) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",@@ -435,13 +434,13 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } -memcpy (&status, dev_buffers[1 ].iov_base,sizeof (status)); +memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { goto out; } status =VIRTIO_NET_ERR ; -virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , dev_buffers,1 ); +virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , &out,1 );if (status !=VIRTIO_NET_OK ) {error_report ("Bad CVQ processing in model" ); }@@ -454,12 +453,6 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -if (dev_buffers[0 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[0 ].iov_base); - } -if (dev_buffers[1 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[1 ].iov_base); - }return r; } --2.31.1
Re: [PATCH v7 08/12] vdpa: Move command buffers map to start of net device
Quoted 46 lines · Jason Wang
Quoted 30 lines · Eugenio Pérez
As this series will reuse them to restore the device state at the end of a migration (or a device start), let's allocate only once at the device start so we don't duplicate their map and unmap.
Signed-off-by Eugenio Pérez <[email protected]>--- net/vhost-vdpa.c | 123 ++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 65 deletions(-)net/vhost-vdpa.c +3
-5@@ -263,29 +263,20 @@ static size_t vhost_vdpa_net_cvq_cmd_page_len(void)return ROUND_UP (vhost_vdpa_net_cvq_cmd_len (),qemu_real_host_page_size ()); } -/** Copy and map a guest buffer. */ -static bool vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v, -const struct iovec *out_data, -size_t out_num,size_t data_len,void *buf, -size_t *written,bool write) +/** Map CVQ buffer. */ +static int vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v,void *buf,size_t size, +bool write) {DMAMap map = {};int r;net/vhost-vdpa.c static size_t vhost_vdpa_net_cvq_cmd_page_len(void) · line 274
Quoted 10 lines
net/vhost-vdpa.c +1
-8-if (unlikely (!data_len)) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: invalid legnth of %s buffer\n" , - __func__, write ?"in" :"out" ); -return false; - } - - *written =iov_to_buf (out_data, out_num,0 , buf, data_len); map.translated_addr = (hwaddr )(uintptr_t )buf; - map.size =vhost_vdpa_net_cvq_cmd_page_len () -1 ; + map.size = size -1 ;Just noticed this, I think I've asked for the reason before but I don't remember the answer.
Quoted 2 lines
But it looks like a hint of a defect of the current API design.
I can look for it in the mail list, but long story short:
vDPA DMA API is *not* inclusive: To map the first page, you map (.iova = 0, .size = 4096).
IOVA tree API has been inclusive forever: To map the first page, you map (.iova = 0, .size = 4095). If we map with .size = 4096, .iova = 4096 is considered mapped too.
To adapt one to the other would have been an API change even before the introduction of vhost-iova-tree.
Thanks!
Quoted 195 lines
Thanks
Quoted 192 lines
net/vhost-vdpa.c +54
-53map.perm = write ?IOMMU_RW :IOMMU_RO , r =vhost_iova_tree_map_alloc (v->iova_tree, &map);if (unlikely (r !=IOVA_OK )) {error_report ("Cannot map injected element" ); -return false; +return r; } r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,@@ -294,50 +285,58 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, goto dma_map_err; } -return true; +return 0 ; dma_map_err:vhost_iova_tree_remove (v->iova_tree, &map); -return false; +return r; } -/** -* Copy the guest element into a dedicated buffer suitable to be sent to NIC -* -* @iov: [0] is the out buffer, [1] is the in one -*/ -static bool vhost_vdpa_net_cvq_map_elem (VhostVDPAState *s, -VirtQueueElement *elem, -struct iovec *iov) +static int vhost_vdpa_net_cvq_prepare (NetClientState *nc) { -size_t in_copied; -bool ok; +VhostVDPAState *s; +int r; - iov[0 ].iov_base = s->cvq_cmd_out_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, elem->out_sg, elem->out_num, -vhost_vdpa_net_cvq_cmd_len (), iov[0 ].iov_base, - &iov[0 ].iov_len, false); -if (unlikely (!ok)) { -return false; +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + + s =DO_UPCAST (VhostVDPAState, nc, nc); +if (!s->vhost_vdpa.shadow_vqs_enabled) { +return 0 ; } - iov[1 ].iov_base = s->cvq_cmd_in_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa,NULL ,0 , -sizeof (virtio_net_ctrl_ack), iov[1 ].iov_base, - &in_copied, true); -if (unlikely (!ok)) { + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), false); +if (unlikely (r <0 )) { +return r; + } + + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), true); +if (unlikely (r <0 )) {vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); -return false; } - iov[1 ].iov_len =sizeof (virtio_net_ctrl_ack); -return true; +return r; +} + +static void vhost_vdpa_net_cvq_stop (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (s->vhost_vdpa.shadow_vqs_enabled) { +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer); + } }static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, + .prepare = vhost_vdpa_net_cvq_prepare, + .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, .has_ufo = vhost_vdpa_has_ufo,@@ -348,19 +347,17 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {* Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model. */ -static bool vhost_vdpa_net_cvq_validate_cmd (const struct iovec *out, -size_t out_num) +static bool vhost_vdpa_net_cvq_validate_cmd (const void *out_buf,size_t len) {struct virtio_net_ctrl_hdr ctrl; -size_t n; - n =iov_to_buf (out, out_num,0 , &ctrl,sizeof (ctrl)); -if (unlikely (n <sizeof (ctrl))) { +if (unlikely (len <sizeof (ctrl))) {qemu_log_mask (LOG_GUEST_ERROR , -"%s: invalid legnth of out buffer %zu\n" , __func__, n); +"%s: invalid legnth of out buffer %zu\n" , __func__, len);return false; } +memcpy (&ctrl, out_buf,sizeof (ctrl));switch (ctrl.class) {case VIRTIO_NET_CTRL_MAC :switch (ctrl.cmd) {@@ -392,10 +389,14 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,VhostVDPAState *s = opaque;size_t in_len, dev_written;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ; -/* out and in buffers sent to the device */ -struct iovec dev_buffers[2 ] = { - { .iov_base = s->cvq_cmd_out_buffer }, - { .iov_base = s->cvq_cmd_in_buffer }, +/* Out buffer sent to both the vdpa device and the device model */ +struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + }; +/* In buffer sent to the device */ +const struct iovec dev_in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), };/* in buffer used for device model */ const struct iovec in = {@@ -405,17 +406,15 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,int r = -EINVAL ;bool ok; - ok =vhost_vdpa_net_cvq_map_elem (s, elem, dev_buffers); -if (unlikely (!ok)) { - goto out; - } - - ok =vhost_vdpa_net_cvq_validate_cmd (&dev_buffers[0 ],1 ); + out.iov_len =iov_to_buf (elem->out_sg, elem->out_num,0 , + s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_len ()); + ok =vhost_vdpa_net_cvq_validate_cmd (s->cvq_cmd_out_buffer, out.iov_len);if (unlikely (!ok)) { goto out; } - r =vhost_svq_add (svq, &dev_buffers[0 ],1 , &dev_buffers[1 ],1 , elem); + r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem);if (unlikely (r !=0 )) {if (unlikely (r == -ENOSPC )) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",@@ -435,13 +434,13 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } -memcpy (&status, dev_buffers[1 ].iov_base,sizeof (status)); +memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { goto out; } status =VIRTIO_NET_ERR ; -virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , dev_buffers,1 ); +virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , &out,1 );if (status !=VIRTIO_NET_OK ) {error_report ("Bad CVQ processing in model" ); }@@ -454,12 +453,6 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -if (dev_buffers[0 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[0 ].iov_base); - } -if (dev_buffers[1 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[1 ].iov_base); - }return r; } --2.31.1
Re: [PATCH v7 08/12] vdpa: Move command buffers map to start of net device
Quoted 51 lines · Eugenio Perez Martin
Quoted 46 lines · Jason Wang
Quoted 30 lines · Eugenio Pérez
As this series will reuse them to restore the device state at the end of a migration (or a device start), let's allocate only once at the device start so we don't duplicate their map and unmap.
Signed-off-by Eugenio Pérez <[email protected]>--- net/vhost-vdpa.c | 123 ++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 65 deletions(-)net/vhost-vdpa.c +3
-5@@ -263,29 +263,20 @@ static size_t vhost_vdpa_net_cvq_cmd_page_len(void)return ROUND_UP (vhost_vdpa_net_cvq_cmd_len (),qemu_real_host_page_size ()); } -/** Copy and map a guest buffer. */ -static bool vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v, -const struct iovec *out_data, -size_t out_num,size_t data_len,void *buf, -size_t *written,bool write) +/** Map CVQ buffer. */ +static int vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v,void *buf,size_t size, +bool write) {DMAMap map = {};int r;net/vhost-vdpa.c static size_t vhost_vdpa_net_cvq_cmd_page_len(void) · line 274
Quoted 10 lines
net/vhost-vdpa.c +1
-8-if (unlikely (!data_len)) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: invalid legnth of %s buffer\n" , - __func__, write ?"in" :"out" ); -return false; - } - - *written =iov_to_buf (out_data, out_num,0 , buf, data_len); map.translated_addr = (hwaddr )(uintptr_t )buf; - map.size =vhost_vdpa_net_cvq_cmd_page_len () -1 ; + map.size = size -1 ;Just noticed this, I think I've asked for the reason before but I don't remember the answer.
Quoted 2 lines
But it looks like a hint of a defect of the current API design.
Quoted 6 lines
I can look for it in the mail list, but long story short:
vDPA DMA API is *not* inclusive: To map the first page, you map (.iova = 0, .size = 4096).
IOVA tree API has been inclusive forever: To map the first page, you map (.iova = 0, .size = 4095). If we map with .size = 4096, .iova = 4096 is considered mapped too.
This looks like a bug.
{.iova=0, size=0} should be illegal but if I understand you correctly, it means [0, 1)?
Thanks
Quoted 203 lines
To adapt one to the other would have been an API change even before the introduction of vhost-iova-tree.
Thanks!
Quoted 195 lines
Thanks
Quoted 192 lines
net/vhost-vdpa.c +54
-53map.perm = write ?IOMMU_RW :IOMMU_RO , r =vhost_iova_tree_map_alloc (v->iova_tree, &map);if (unlikely (r !=IOVA_OK )) {error_report ("Cannot map injected element" ); -return false; +return r; } r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,@@ -294,50 +285,58 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, goto dma_map_err; } -return true; +return 0 ; dma_map_err:vhost_iova_tree_remove (v->iova_tree, &map); -return false; +return r; } -/** -* Copy the guest element into a dedicated buffer suitable to be sent to NIC -* -* @iov: [0] is the out buffer, [1] is the in one -*/ -static bool vhost_vdpa_net_cvq_map_elem (VhostVDPAState *s, -VirtQueueElement *elem, -struct iovec *iov) +static int vhost_vdpa_net_cvq_prepare (NetClientState *nc) { -size_t in_copied; -bool ok; +VhostVDPAState *s; +int r; - iov[0 ].iov_base = s->cvq_cmd_out_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, elem->out_sg, elem->out_num, -vhost_vdpa_net_cvq_cmd_len (), iov[0 ].iov_base, - &iov[0 ].iov_len, false); -if (unlikely (!ok)) { -return false; +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + + s =DO_UPCAST (VhostVDPAState, nc, nc); +if (!s->vhost_vdpa.shadow_vqs_enabled) { +return 0 ; } - iov[1 ].iov_base = s->cvq_cmd_in_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa,NULL ,0 , -sizeof (virtio_net_ctrl_ack), iov[1 ].iov_base, - &in_copied, true); -if (unlikely (!ok)) { + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), false); +if (unlikely (r <0 )) { +return r; + } + + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), true); +if (unlikely (r <0 )) {vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); -return false; } - iov[1 ].iov_len =sizeof (virtio_net_ctrl_ack); -return true; +return r; +} + +static void vhost_vdpa_net_cvq_stop (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (s->vhost_vdpa.shadow_vqs_enabled) { +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer); + } }static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, + .prepare = vhost_vdpa_net_cvq_prepare, + .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, .has_ufo = vhost_vdpa_has_ufo,@@ -348,19 +347,17 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {* Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model. */ -static bool vhost_vdpa_net_cvq_validate_cmd (const struct iovec *out, -size_t out_num) +static bool vhost_vdpa_net_cvq_validate_cmd (const void *out_buf,size_t len) {struct virtio_net_ctrl_hdr ctrl; -size_t n; - n =iov_to_buf (out, out_num,0 , &ctrl,sizeof (ctrl)); -if (unlikely (n <sizeof (ctrl))) { +if (unlikely (len <sizeof (ctrl))) {qemu_log_mask (LOG_GUEST_ERROR , -"%s: invalid legnth of out buffer %zu\n" , __func__, n); +"%s: invalid legnth of out buffer %zu\n" , __func__, len);return false; } +memcpy (&ctrl, out_buf,sizeof (ctrl));switch (ctrl.class) {case VIRTIO_NET_CTRL_MAC :switch (ctrl.cmd) {@@ -392,10 +389,14 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,VhostVDPAState *s = opaque;size_t in_len, dev_written;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ; -/* out and in buffers sent to the device */ -struct iovec dev_buffers[2 ] = { - { .iov_base = s->cvq_cmd_out_buffer }, - { .iov_base = s->cvq_cmd_in_buffer }, +/* Out buffer sent to both the vdpa device and the device model */ +struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + }; +/* In buffer sent to the device */ +const struct iovec dev_in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), };/* in buffer used for device model */ const struct iovec in = {@@ -405,17 +406,15 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,int r = -EINVAL ;bool ok; - ok =vhost_vdpa_net_cvq_map_elem (s, elem, dev_buffers); -if (unlikely (!ok)) { - goto out; - } - - ok =vhost_vdpa_net_cvq_validate_cmd (&dev_buffers[0 ],1 ); + out.iov_len =iov_to_buf (elem->out_sg, elem->out_num,0 , + s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_len ()); + ok =vhost_vdpa_net_cvq_validate_cmd (s->cvq_cmd_out_buffer, out.iov_len);if (unlikely (!ok)) { goto out; } - r =vhost_svq_add (svq, &dev_buffers[0 ],1 , &dev_buffers[1 ],1 , elem); + r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem);if (unlikely (r !=0 )) {if (unlikely (r == -ENOSPC )) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",@@ -435,13 +434,13 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } -memcpy (&status, dev_buffers[1 ].iov_base,sizeof (status)); +memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { goto out; } status =VIRTIO_NET_ERR ; -virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , dev_buffers,1 ); +virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , &out,1 );if (status !=VIRTIO_NET_OK ) {error_report ("Bad CVQ processing in model" ); }@@ -454,12 +453,6 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -if (dev_buffers[0 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[0 ].iov_base); - } -if (dev_buffers[1 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[1 ].iov_base); - }return r; } --2.31.1
Re: [PATCH v7 08/12] vdpa: Move command buffers map to start of net device
Quoted 60 lines · Jason Wang
Quoted 51 lines · Eugenio Perez Martin
Quoted 46 lines · Jason Wang
Quoted 30 lines · Eugenio Pérez
As this series will reuse them to restore the device state at the end of a migration (or a device start), let's allocate only once at the device start so we don't duplicate their map and unmap.
Signed-off-by Eugenio Pérez <[email protected]>--- net/vhost-vdpa.c | 123 ++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 65 deletions(-)net/vhost-vdpa.c +3
-5@@ -263,29 +263,20 @@ static size_t vhost_vdpa_net_cvq_cmd_page_len(void)return ROUND_UP (vhost_vdpa_net_cvq_cmd_len (),qemu_real_host_page_size ()); } -/** Copy and map a guest buffer. */ -static bool vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v, -const struct iovec *out_data, -size_t out_num,size_t data_len,void *buf, -size_t *written,bool write) +/** Map CVQ buffer. */ +static int vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v,void *buf,size_t size, +bool write) {DMAMap map = {};int r;net/vhost-vdpa.c static size_t vhost_vdpa_net_cvq_cmd_page_len(void) · line 274
Quoted 10 lines
net/vhost-vdpa.c +1
-8-if (unlikely (!data_len)) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: invalid legnth of %s buffer\n" , - __func__, write ?"in" :"out" ); -return false; - } - - *written =iov_to_buf (out_data, out_num,0 , buf, data_len); map.translated_addr = (hwaddr )(uintptr_t )buf; - map.size =vhost_vdpa_net_cvq_cmd_page_len () -1 ; + map.size = size -1 ;Just noticed this, I think I've asked for the reason before but I don't remember the answer.
Quoted 2 lines
But it looks like a hint of a defect of the current API design.
Quoted 6 lines
I can look for it in the mail list, but long story short:
vDPA DMA API is *not* inclusive: To map the first page, you map (.iova = 0, .size = 4096).
IOVA tree API has been inclusive forever: To map the first page, you map (.iova = 0, .size = 4095). If we map with .size = 4096, .iova = 4096 is considered mapped too.
Quoted 5 lines
This looks like a bug.
{.iova=0, size=0} should be illegal but if I understand you correctly, it means [0, 1)?
On iova_tree it works the way you point here, yes. Maybe the member's name should have been length or something like that.
On intel_iommu the address *mask* is actually used to fill the size, not the actual DMA entry length.
For SVQ I think it would be beneficial to declare two different types, size_inclusive and size_non_inclusive, and check at compile time if the caller is using the right type. But it's not top priority at the moment.
Thanks!
Quoted 206 lines
Thanks
Quoted 203 lines
To adapt one to the other would have been an API change even before the introduction of vhost-iova-tree.
Thanks!
Quoted 195 lines
Thanks
Quoted 192 lines
net/vhost-vdpa.c +54
-53map.perm = write ?IOMMU_RW :IOMMU_RO , r =vhost_iova_tree_map_alloc (v->iova_tree, &map);if (unlikely (r !=IOVA_OK )) {error_report ("Cannot map injected element" ); -return false; +return r; } r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,@@ -294,50 +285,58 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, goto dma_map_err; } -return true; +return 0 ; dma_map_err:vhost_iova_tree_remove (v->iova_tree, &map); -return false; +return r; } -/** -* Copy the guest element into a dedicated buffer suitable to be sent to NIC -* -* @iov: [0] is the out buffer, [1] is the in one -*/ -static bool vhost_vdpa_net_cvq_map_elem (VhostVDPAState *s, -VirtQueueElement *elem, -struct iovec *iov) +static int vhost_vdpa_net_cvq_prepare (NetClientState *nc) { -size_t in_copied; -bool ok; +VhostVDPAState *s; +int r; - iov[0 ].iov_base = s->cvq_cmd_out_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, elem->out_sg, elem->out_num, -vhost_vdpa_net_cvq_cmd_len (), iov[0 ].iov_base, - &iov[0 ].iov_len, false); -if (unlikely (!ok)) { -return false; +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + + s =DO_UPCAST (VhostVDPAState, nc, nc); +if (!s->vhost_vdpa.shadow_vqs_enabled) { +return 0 ; } - iov[1 ].iov_base = s->cvq_cmd_in_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa,NULL ,0 , -sizeof (virtio_net_ctrl_ack), iov[1 ].iov_base, - &in_copied, true); -if (unlikely (!ok)) { + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), false); +if (unlikely (r <0 )) { +return r; + } + + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), true); +if (unlikely (r <0 )) {vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); -return false; } - iov[1 ].iov_len =sizeof (virtio_net_ctrl_ack); -return true; +return r; +} + +static void vhost_vdpa_net_cvq_stop (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (s->vhost_vdpa.shadow_vqs_enabled) { +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer); + } }static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, + .prepare = vhost_vdpa_net_cvq_prepare, + .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, .has_ufo = vhost_vdpa_has_ufo,@@ -348,19 +347,17 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {* Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model. */ -static bool vhost_vdpa_net_cvq_validate_cmd (const struct iovec *out, -size_t out_num) +static bool vhost_vdpa_net_cvq_validate_cmd (const void *out_buf,size_t len) {struct virtio_net_ctrl_hdr ctrl; -size_t n; - n =iov_to_buf (out, out_num,0 , &ctrl,sizeof (ctrl)); -if (unlikely (n <sizeof (ctrl))) { +if (unlikely (len <sizeof (ctrl))) {qemu_log_mask (LOG_GUEST_ERROR , -"%s: invalid legnth of out buffer %zu\n" , __func__, n); +"%s: invalid legnth of out buffer %zu\n" , __func__, len);return false; } +memcpy (&ctrl, out_buf,sizeof (ctrl));switch (ctrl.class) {case VIRTIO_NET_CTRL_MAC :switch (ctrl.cmd) {@@ -392,10 +389,14 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,VhostVDPAState *s = opaque;size_t in_len, dev_written;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ; -/* out and in buffers sent to the device */ -struct iovec dev_buffers[2 ] = { - { .iov_base = s->cvq_cmd_out_buffer }, - { .iov_base = s->cvq_cmd_in_buffer }, +/* Out buffer sent to both the vdpa device and the device model */ +struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + }; +/* In buffer sent to the device */ +const struct iovec dev_in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), };/* in buffer used for device model */ const struct iovec in = {@@ -405,17 +406,15 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,int r = -EINVAL ;bool ok; - ok =vhost_vdpa_net_cvq_map_elem (s, elem, dev_buffers); -if (unlikely (!ok)) { - goto out; - } - - ok =vhost_vdpa_net_cvq_validate_cmd (&dev_buffers[0 ],1 ); + out.iov_len =iov_to_buf (elem->out_sg, elem->out_num,0 , + s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_len ()); + ok =vhost_vdpa_net_cvq_validate_cmd (s->cvq_cmd_out_buffer, out.iov_len);if (unlikely (!ok)) { goto out; } - r =vhost_svq_add (svq, &dev_buffers[0 ],1 , &dev_buffers[1 ],1 , elem); + r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem);if (unlikely (r !=0 )) {if (unlikely (r == -ENOSPC )) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",@@ -435,13 +434,13 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } -memcpy (&status, dev_buffers[1 ].iov_base,sizeof (status)); +memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { goto out; } status =VIRTIO_NET_ERR ; -virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , dev_buffers,1 ); +virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , &out,1 );if (status !=VIRTIO_NET_OK ) {error_report ("Bad CVQ processing in model" ); }@@ -454,12 +453,6 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -if (dev_buffers[0 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[0 ].iov_base); - } -if (dev_buffers[1 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[1 ].iov_base); - }return r; } --2.31.1
Re: [PATCH v7 08/12] vdpa: Move command buffers map to start of net device
Quoted 71 lines · Eugenio Perez Martin
Quoted 60 lines · Jason Wang
Quoted 51 lines · Eugenio Perez Martin
Quoted 46 lines · Jason Wang
Quoted 30 lines · Eugenio Pérez
As this series will reuse them to restore the device state at the end of a migration (or a device start), let's allocate only once at the device start so we don't duplicate their map and unmap.
Signed-off-by Eugenio Pérez <[email protected]>--- net/vhost-vdpa.c | 123 ++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 65 deletions(-)net/vhost-vdpa.c +3
-5@@ -263,29 +263,20 @@ static size_t vhost_vdpa_net_cvq_cmd_page_len(void)return ROUND_UP (vhost_vdpa_net_cvq_cmd_len (),qemu_real_host_page_size ()); } -/** Copy and map a guest buffer. */ -static bool vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v, -const struct iovec *out_data, -size_t out_num,size_t data_len,void *buf, -size_t *written,bool write) +/** Map CVQ buffer. */ +static int vhost_vdpa_cvq_map_buf (struct vhost_vdpa *v,void *buf,size_t size, +bool write) {DMAMap map = {};int r;net/vhost-vdpa.c static size_t vhost_vdpa_net_cvq_cmd_page_len(void) · line 274
Quoted 10 lines
net/vhost-vdpa.c +1
-8-if (unlikely (!data_len)) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: invalid legnth of %s buffer\n" , - __func__, write ?"in" :"out" ); -return false; - } - - *written =iov_to_buf (out_data, out_num,0 , buf, data_len); map.translated_addr = (hwaddr )(uintptr_t )buf; - map.size =vhost_vdpa_net_cvq_cmd_page_len () -1 ; + map.size = size -1 ;Just noticed this, I think I've asked for the reason before but I don't remember the answer.
Quoted 2 lines
But it looks like a hint of a defect of the current API design.
Quoted 6 lines
I can look for it in the mail list, but long story short:
vDPA DMA API is *not* inclusive: To map the first page, you map (.iova = 0, .size = 4096).
IOVA tree API has been inclusive forever: To map the first page, you map (.iova = 0, .size = 4095). If we map with .size = 4096, .iova = 4096 is considered mapped too.Quoted 5 lines
This looks like a bug.
{.iova=0, size=0} should be illegal but if I understand you correctly, it means [0, 1)?
On
iova_treeit works the way you point here, yes. Maybe the member's name should have been length or something like that.
Quoted 6 lines
On
intel_iommuthe address *mask* is actually used to fill the size, not the actual DMA entry length.For SVQ I think it would be beneficial to declare two different types,
size_inclusiveandsize_non_inclusive, and check at compile time if the caller is using the right type.
That's sub-optimal, we'd better go with a single type of size or switch to use [start, end].
Quoted 2 lines
But it's not top priority at the
moment.
Yes, let's optimize it on top.
Thanks
Quoted 210 lines
Thanks!
Quoted 206 lines
Thanks
Quoted 203 lines
To adapt one to the other would have been an API change even before the introduction of vhost-iova-tree.
Thanks!
Quoted 195 lines
Thanks
Quoted 192 lines
net/vhost-vdpa.c +54
-53map.perm = write ?IOMMU_RW :IOMMU_RO , r =vhost_iova_tree_map_alloc (v->iova_tree, &map);if (unlikely (r !=IOVA_OK )) {error_report ("Cannot map injected element" ); -return false; +return r; } r = vhost_vdpa_dma_map(v, map.iova, vhost_vdpa_net_cvq_cmd_page_len(), buf,@@ -294,50 +285,58 @@ static bool vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, goto dma_map_err; } -return true; +return 0 ; dma_map_err:vhost_iova_tree_remove (v->iova_tree, &map); -return false; +return r; } -/** -* Copy the guest element into a dedicated buffer suitable to be sent to NIC -* -* @iov: [0] is the out buffer, [1] is the in one -*/ -static bool vhost_vdpa_net_cvq_map_elem (VhostVDPAState *s, -VirtQueueElement *elem, -struct iovec *iov) +static int vhost_vdpa_net_cvq_prepare (NetClientState *nc) { -size_t in_copied; -bool ok; +VhostVDPAState *s; +int r; - iov[0 ].iov_base = s->cvq_cmd_out_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, elem->out_sg, elem->out_num, -vhost_vdpa_net_cvq_cmd_len (), iov[0 ].iov_base, - &iov[0 ].iov_len, false); -if (unlikely (!ok)) { -return false; +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + + s =DO_UPCAST (VhostVDPAState, nc, nc); +if (!s->vhost_vdpa.shadow_vqs_enabled) { +return 0 ; } - iov[1 ].iov_base = s->cvq_cmd_in_buffer; - ok =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa,NULL ,0 , -sizeof (virtio_net_ctrl_ack), iov[1 ].iov_base, - &in_copied, true); -if (unlikely (!ok)) { + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), false); +if (unlikely (r <0 )) { +return r; + } + + r =vhost_vdpa_cvq_map_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer, +vhost_vdpa_net_cvq_cmd_page_len (), true); +if (unlikely (r <0 )) {vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); -return false; } - iov[1 ].iov_len =sizeof (virtio_net_ctrl_ack); -return true; +return r; +} + +static void vhost_vdpa_net_cvq_stop (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (s->vhost_vdpa.shadow_vqs_enabled) { +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_out_buffer); +vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, s->cvq_cmd_in_buffer); + } }static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, + .prepare = vhost_vdpa_net_cvq_prepare, + .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, .has_ufo = vhost_vdpa_has_ufo,@@ -348,19 +347,17 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {* Do not forward commands not supported by SVQ. Otherwise, the device could * accept it and qemu would not know how to update the device model. */ -static bool vhost_vdpa_net_cvq_validate_cmd (const struct iovec *out, -size_t out_num) +static bool vhost_vdpa_net_cvq_validate_cmd (const void *out_buf,size_t len) {struct virtio_net_ctrl_hdr ctrl; -size_t n; - n =iov_to_buf (out, out_num,0 , &ctrl,sizeof (ctrl)); -if (unlikely (n <sizeof (ctrl))) { +if (unlikely (len <sizeof (ctrl))) {qemu_log_mask (LOG_GUEST_ERROR , -"%s: invalid legnth of out buffer %zu\n" , __func__, n); +"%s: invalid legnth of out buffer %zu\n" , __func__, len);return false; } +memcpy (&ctrl, out_buf,sizeof (ctrl));switch (ctrl.class) {case VIRTIO_NET_CTRL_MAC :switch (ctrl.cmd) {@@ -392,10 +389,14 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,VhostVDPAState *s = opaque;size_t in_len, dev_written;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ; -/* out and in buffers sent to the device */ -struct iovec dev_buffers[2 ] = { - { .iov_base = s->cvq_cmd_out_buffer }, - { .iov_base = s->cvq_cmd_in_buffer }, +/* Out buffer sent to both the vdpa device and the device model */ +struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + }; +/* In buffer sent to the device */ +const struct iovec dev_in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), };/* in buffer used for device model */ const struct iovec in = {@@ -405,17 +406,15 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,int r = -EINVAL ;bool ok; - ok =vhost_vdpa_net_cvq_map_elem (s, elem, dev_buffers); -if (unlikely (!ok)) { - goto out; - } - - ok =vhost_vdpa_net_cvq_validate_cmd (&dev_buffers[0 ],1 ); + out.iov_len =iov_to_buf (elem->out_sg, elem->out_num,0 , + s->cvq_cmd_out_buffer, +vhost_vdpa_net_cvq_cmd_len ()); + ok =vhost_vdpa_net_cvq_validate_cmd (s->cvq_cmd_out_buffer, out.iov_len);if (unlikely (!ok)) { goto out; } - r =vhost_svq_add (svq, &dev_buffers[0 ],1 , &dev_buffers[1 ],1 , elem); + r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem);if (unlikely (r !=0 )) {if (unlikely (r == -ENOSPC )) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",@@ -435,13 +434,13 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } -memcpy (&status, dev_buffers[1 ].iov_base,sizeof (status)); +memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { goto out; } status =VIRTIO_NET_ERR ; -virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , dev_buffers,1 ); +virtio_net_handle_ctrl_iov (svq->vdev, &in,1 , &out,1 );if (status !=VIRTIO_NET_OK ) {error_report ("Bad CVQ processing in model" ); }@@ -454,12 +453,6 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -if (dev_buffers[0 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[0 ].iov_base); - } -if (dev_buffers[1 ].iov_base) { -vhost_vdpa_cvq_unmap_buf (&s->vhost_vdpa, dev_buffers[1 ].iov_base); - }return r; } --2.31.1
PATCH v7 9/12 vdpa: Extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
In reply to Eugenio PérezSo we can reuse it to inject state messages.
--
v7:
* Remove double free error
v6:
* Do not assume in buffer sent to the device is sizeof(virtio_net_ctrl_ack)
v5:
* Do not use an artificial !NULL VirtQueueElement
* Use only out size instead of iovec dev_buffers for these functions.
--- net/vhost-vdpa.c | 59 +++++++++++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 21 deletions(-)
net/vhost-vdpa.c +38 -21
@@ -331,6 +331,38 @@ static void vhost_vdpa_net_cvq_stop(NetClientState *nc) } } +static ssize_t vhost_vdpa_net_cvq_add (VhostVDPAState *s,size_t out_len, +size_t in_len) +{ +/* Buffers for the device */ +const struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + .iov_len = out_len, + }; +const struct iovec in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), + }; +VhostShadowVirtqueue *svq =g_ptr_array_index (s->vhost_vdpa.shadow_vqs,0 ); +int r; + + r =vhost_svq_add (svq, &out,1 , &in,1 ,NULL ); +if (unlikely (r !=0 )) { +if (unlikely (r == -ENOSPC )) { +qemu_log_mask (LOG_GUEST_ERROR ,"%s: No space on device queue\n" , + __func__); + } +return r; + } + +/* +* We can poll here since we've had BQL from the time we sent the +* descriptor. Also, we need to take the answer before SVQ pulls by itself, +* when BQL is released +*/ +return vhost_svq_poll (svq); +} +static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState),
@@ -387,23 +419,18 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, void *opaque) {VhostVDPAState *s = opaque; -size_t in_len, dev_written; +size_t in_len;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ;/* Out buffer sent to both the vdpa device and the device model */ struct iovec out = { .iov_base = s->cvq_cmd_out_buffer, }; -/* In buffer sent to the device */ -const struct iovec dev_in = { - .iov_base = s->cvq_cmd_in_buffer, - .iov_len =sizeof (virtio_net_ctrl_ack), - };/* in buffer used for device model */ const struct iovec in = { .iov_base = &status, .iov_len =sizeof (status), }; -int r = -EINVAL ; +ssize_t dev_written = -EINVAL ;bool ok; out.iov_len = iov_to_buf(elem->out_sg, elem->out_num, 0,
@@ -414,21 +441,11 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } - r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem); -if (unlikely (r !=0 )) { -if (unlikely (r == -ENOSPC )) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: No space on device queue\n" , - __func__); - } + dev_written =vhost_vdpa_net_cvq_add (s, out.iov_len,sizeof (status)); +if (unlikely (dev_written <0 )) { goto out; } -/* -* We can poll here since we've had BQL from the time we sent the -* descriptor. Also, we need to take the answer before SVQ pulls by itself, -* when BQL is released -*/ - dev_written =vhost_svq_poll (svq);if (unlikely (dev_written <sizeof (status))) {error_report ("Insufficient written data (%zu)" , dev_written); goto out;
@@ -436,7 +453,7 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { - goto out; +return VIRTIO_NET_ERR ; } status =VIRTIO_NET_ERR ;
@@ -453,7 +470,7 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -return r; +return dev_written <0 ? dev_written :0 ; }static const VhostShadowVirtqueueOps vhost_vdpa_net_svq_ops = {
Signature · 1 line
2.31.1
Re: [PATCH v7 09/12] vdpa: Extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail
Quoted 4 lines · Eugenio Pérez
So we can reuse it to inject state messages.
Signed-off-by Eugenio Pérez <[email protected]>
Quoted 128 lines
--
v7:
* Remove double free errorv6:
* Do not assume in buffer sent to the device issizeof(virtio_net_ctrl_ack)v5:
* Do not use an artificial !NULL VirtQueueElement
* Use only out size instead of iovecdev_buffersfor these functions.--- net/vhost-vdpa.c | 59 +++++++++++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 21 deletions(-)net/vhost-vdpa.c +38
-22@@ -331,6 +331,38 @@ static void vhost_vdpa_net_cvq_stop(NetClientState *nc) } } +static ssize_t vhost_vdpa_net_cvq_add (VhostVDPAState *s,size_t out_len, +size_t in_len) +{ +/* Buffers for the device */ +const struct iovec out = { + .iov_base = s->cvq_cmd_out_buffer, + .iov_len = out_len, + }; +const struct iovec in = { + .iov_base = s->cvq_cmd_in_buffer, + .iov_len =sizeof (virtio_net_ctrl_ack), + }; +VhostShadowVirtqueue *svq =g_ptr_array_index (s->vhost_vdpa.shadow_vqs,0 ); +int r; + + r =vhost_svq_add (svq, &out,1 , &in,1 ,NULL ); +if (unlikely (r !=0 )) { +if (unlikely (r == -ENOSPC )) { +qemu_log_mask (LOG_GUEST_ERROR ,"%s: No space on device queue\n" , + __func__); + } +return r; + } + +/* +* We can poll here since we've had BQL from the time we sent the +* descriptor. Also, we need to take the answer before SVQ pulls by itself, +* when BQL is released +*/ +return vhost_svq_poll (svq); +} +static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState),@@ -387,23 +419,18 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, void *opaque) {VhostVDPAState *s = opaque; -size_t in_len, dev_written; +size_t in_len;virtio_net_ctrl_ack status =VIRTIO_NET_ERR ;/* Out buffer sent to both the vdpa device and the device model */ struct iovec out = { .iov_base = s->cvq_cmd_out_buffer, }; -/* In buffer sent to the device */ -const struct iovec dev_in = { - .iov_base = s->cvq_cmd_in_buffer, - .iov_len =sizeof (virtio_net_ctrl_ack), - };/* in buffer used for device model */ const struct iovec in = { .iov_base = &status, .iov_len =sizeof (status), }; -int r = -EINVAL ; +ssize_t dev_written = -EINVAL ;bool ok; out.iov_len = iov_to_buf(elem->out_sg, elem->out_num, 0,@@ -414,21 +441,11 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq, goto out; } - r =vhost_svq_add (svq, &out,1 , &dev_in,1 , elem); -if (unlikely (r !=0 )) { -if (unlikely (r == -ENOSPC )) { -qemu_log_mask (LOG_GUEST_ERROR ,"%s: No space on device queue\n" , - __func__); - } + dev_written =vhost_vdpa_net_cvq_add (s, out.iov_len,sizeof (status)); +if (unlikely (dev_written <0 )) { goto out; } -/* -* We can poll here since we've had BQL from the time we sent the -* descriptor. Also, we need to take the answer before SVQ pulls by itself, -* when BQL is released -*/ - dev_written =vhost_svq_poll (svq);if (unlikely (dev_written <sizeof (status))) {error_report ("Insufficient written data (%zu)" , dev_written); goto out;@@ -436,7 +453,7 @@ static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,memcpy (&status, s->cvq_cmd_in_buffer,sizeof (status));if (status !=VIRTIO_NET_OK ) { - goto out; +return VIRTIO_NET_ERR ; } status =VIRTIO_NET_ERR ;@@ -453,7 +470,7 @@ out: }vhost_svq_push_elem (svq, elem,MIN (in_len,sizeof (status)));g_free (elem); -return r; +return dev_written <0 ? dev_written :0 ; }static const VhostShadowVirtqueueOps vhost_vdpa_net_svq_ops = { --2.31.1
PATCH v7 10/12 vhost_net: add NetClientState->load() callback
In reply to Eugenio PérezIt allows per-net client operations right after device's successful start. In particular, to load the device status.
Vhost-vdpa net will use it to add the CVQ buffers to restore the device status.
---
v5: Rename start / load, naming it more specifically.
--- include/net/net.h | 2 ++ hw/net/vhost_net.c | 7 +++++++ 2 files changed, 9 insertions(+)
include/net/net.h +2 -0
@@ -45,6 +45,7 @@ typedef struct NICConf {typedef void (NetPoll )(NetClientState *,bool enable);typedef bool (NetCanReceive )(NetClientState *);typedef int (NetPrepare )(NetClientState *); +typedef int (NetLoad )(NetClientState *);typedef void (NetStop )(NetClientState *);typedef ssize_t (NetReceive )(NetClientState *,const uint8_t *,size_t );typedef ssize_t (NetReceiveIOV )(NetClientState *,const struct iovec *,int );
@@ -74,6 +75,7 @@ typedef struct NetClientInfo {NetReceiveIOV *receive_iov;NetCanReceive *can_receive;NetPrepare *prepare; +NetLoad *load;NetStop *stop;NetCleanup *cleanup;LinkStatusChanged *link_status_changed;
hw/net/vhost_net.c +7 -0
@@ -281,6 +281,13 @@ static int vhost_net_start_one(struct vhost_net *net, } } } + +if (net->nc->info->load) { + r = net->nc->info->load (net->nc); +if (r <0 ) { + goto fail; + } + }return 0 ; fail: file.fd =-1 ;
Signature · 1 line
2.31.1
PATCH v7 11/12 vdpa: Add virtio-net mac address via CVQ at start
In reply to Eugenio PérezThis is needed so the destination vdpa device see the same state a the guest set in the source.
---
v6:
* Map and unmap command buffers at the start and end of device usage.
v5:
* Rename s/start/load/
* Use independent NetClientInfo to only add load callback on cvq.
--- net/vhost-vdpa.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
net/vhost-vdpa.c +43 -0
@@ -363,11 +363,54 @@ static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len,return vhost_svq_poll (svq); } +static int vhost_vdpa_net_load (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); +struct vhost_vdpa *v = &s->vhost_vdpa; +VirtIONet *n; +uint64_t features; + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (!v->shadow_vqs_enabled) { +return 0 ; + } + + n =VIRTIO_NET (v->dev->vdev); + features = v->dev->vdev->host_features; +if (features &BIT_ULL (VIRTIO_NET_F_CTRL_MAC_ADDR )) { +const struct virtio_net_ctrl_hdr ctrl = { + .class =VIRTIO_NET_CTRL_MAC , + .cmd =VIRTIO_NET_CTRL_MAC_ADDR_SET , + }; +char *cursor = s->cvq_cmd_out_buffer; +ssize_t dev_written; +virtio_net_ctrl_ack state; + +memcpy (cursor, &ctrl,sizeof (ctrl)); + cursor +=sizeof (ctrl); +memcpy (cursor, n->mac,sizeof (n->mac)); + cursor +=sizeof (n->mac); + + dev_written =vhost_vdpa_net_cvq_add (s,sizeof (ctrl) +sizeof (n->mac), +sizeof (state)); +if (unlikely (dev_written <0 )) { +return dev_written; + } + +memcpy (&state, s->cvq_cmd_in_buffer,sizeof (state)); +return state ==VIRTIO_NET_OK ?0 :-1 ; + } + +return 0 ; +} +static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, .prepare = vhost_vdpa_net_cvq_prepare, + .load = vhost_vdpa_net_load, .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
Signature · 1 line
2.31.1
Re: [PATCH v7 11/12] vdpa: Add virtio-net mac address via CVQ at start
Quoted 34 lines · Eugenio Pérez
This is needed so the destination vdpa device see the same state a the guest set in the source.
Signed-off-by Eugenio Pérez <[email protected]>---
v6:
* Map and unmap command buffers at the start and end of device usage.v5:
* Rename s/start/load/
* Use independent NetClientInfo to only add load callback on cvq.--- net/vhost-vdpa.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)net/vhost-vdpa.c +10
-0@@ -363,11 +363,54 @@ static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len,return vhost_svq_poll (svq); } +static int vhost_vdpa_net_load (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); +struct vhost_vdpa *v = &s->vhost_vdpa; +VirtIONet *n; +uint64_t features; + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (!v->shadow_vqs_enabled) {
net/vhost-vdpa.c static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len, · line 385
Quoted 10 lines
net/vhost-vdpa.c +10
-0+return 0 ; + } + + n =VIRTIO_NET (v->dev->vdev); + features = v->dev->vdev->host_features; +if (features &BIT_ULL (VIRTIO_NET_F_CTRL_MAC_ADDR )) { +const struct virtio_net_ctrl_hdr ctrl = { + .class =VIRTIO_NET_CTRL_MAC , + .cmd =VIRTIO_NET_CTRL_MAC_ADDR_SET , + };
Can we build this directly from the cmd_out_buffer?
net/vhost-vdpa.c static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len, · line 388
Quoted 3 lines
net/vhost-vdpa.c +3
-0+char *cursor = s->cvq_cmd_out_buffer; +ssize_t dev_written; +virtio_net_ctrl_ack state;
I think we can read the status directly from the cmd_in_buffer.
Thanks
Quoted 31 lines
net/vhost-vdpa.c +20
-1+ +memcpy (cursor, &ctrl,sizeof (ctrl)); + cursor +=sizeof (ctrl); +memcpy (cursor, n->mac,sizeof (n->mac)); + cursor +=sizeof (n->mac); + + dev_written =vhost_vdpa_net_cvq_add (s,sizeof (ctrl) +sizeof (n->mac), +sizeof (state)); +if (unlikely (dev_written <0 )) { +return dev_written; + } + +memcpy (&state, s->cvq_cmd_in_buffer,sizeof (state)); +return state ==VIRTIO_NET_OK ?0 :-1 ; + } + +return 0 ; +} +static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, .prepare = vhost_vdpa_net_cvq_prepare, + .load = vhost_vdpa_net_load, .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, --2.31.1
Re: [PATCH v7 11/12] vdpa: Add virtio-net mac address via CVQ at start
Quoted 49 lines · Jason Wang
Quoted 34 lines · Eugenio Pérez
This is needed so the destination vdpa device see the same state a the guest set in the source.
Signed-off-by Eugenio Pérez <[email protected]>---
v6:
* Map and unmap command buffers at the start and end of device usage.v5:
* Rename s/start/load/
* Use independent NetClientInfo to only add load callback on cvq.--- net/vhost-vdpa.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)net/vhost-vdpa.c +10
-0@@ -363,11 +363,54 @@ static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len,return vhost_svq_poll (svq); } +static int vhost_vdpa_net_load (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); +struct vhost_vdpa *v = &s->vhost_vdpa; +VirtIONet *n; +uint64_t features; + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (!v->shadow_vqs_enabled) {net/vhost-vdpa.c static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len, · line 385
Quoted 10 lines
net/vhost-vdpa.c +10
-0+return 0 ; + } + + n =VIRTIO_NET (v->dev->vdev); + features = v->dev->vdev->host_features; +if (features &BIT_ULL (VIRTIO_NET_F_CTRL_MAC_ADDR )) { +const struct virtio_net_ctrl_hdr ctrl = { + .class =VIRTIO_NET_CTRL_MAC , + .cmd =VIRTIO_NET_CTRL_MAC_ADDR_SET , + };Can we build this directly from the
cmd_out_buffer?
Quoted 6 lines
net/vhost-vdpa.c static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len, · line 388
Quoted 3 lines
net/vhost-vdpa.c +3
-0+char *cursor = s->cvq_cmd_out_buffer; +ssize_t dev_written; +virtio_net_ctrl_ack state;I think we can read the status directly from the
cmd_in_buffer.
Directly casting it to virtio_net_ctrl_ack? Sure.
Thanks!
Quoted 34 lines
Thanks
Quoted 31 lines
net/vhost-vdpa.c +20
-1+ +memcpy (cursor, &ctrl,sizeof (ctrl)); + cursor +=sizeof (ctrl); +memcpy (cursor, n->mac,sizeof (n->mac)); + cursor +=sizeof (n->mac); + + dev_written =vhost_vdpa_net_cvq_add (s,sizeof (ctrl) +sizeof (n->mac), +sizeof (state)); +if (unlikely (dev_written <0 )) { +return dev_written; + } + +memcpy (&state, s->cvq_cmd_in_buffer,sizeof (state)); +return state ==VIRTIO_NET_OK ?0 :-1 ; + } + +return 0 ; +} +static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, .prepare = vhost_vdpa_net_cvq_prepare, + .load = vhost_vdpa_net_load, .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, --2.31.1
Re: [PATCH v7 11/12] vdpa: Add virtio-net mac address via CVQ at start
Quoted 51 lines · Eugenio Perez Martin
Quoted 49 lines · Jason Wang
Quoted 34 lines · Eugenio Pérez
This is needed so the destination vdpa device see the same state a the guest set in the source.
Signed-off-by Eugenio Pérez <[email protected]>---
v6:
* Map and unmap command buffers at the start and end of device usage.v5:
* Rename s/start/load/
* Use independent NetClientInfo to only add load callback on cvq.--- net/vhost-vdpa.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)net/vhost-vdpa.c +10
-0@@ -363,11 +363,54 @@ static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len,return vhost_svq_poll (svq); } +static int vhost_vdpa_net_load (NetClientState *nc) +{ +VhostVDPAState *s =DO_UPCAST (VhostVDPAState, nc, nc); +struct vhost_vdpa *v = &s->vhost_vdpa; +VirtIONet *n; +uint64_t features; + +assert (nc->info->type ==NET_CLIENT_DRIVER_VHOST_VDPA ); + +if (!v->shadow_vqs_enabled) {net/vhost-vdpa.c static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len, · line 385
Quoted 10 lines
net/vhost-vdpa.c +10
-0+return 0 ; + } + + n =VIRTIO_NET (v->dev->vdev); + features = v->dev->vdev->host_features; +if (features &BIT_ULL (VIRTIO_NET_F_CTRL_MAC_ADDR )) { +const struct virtio_net_ctrl_hdr ctrl = { + .class =VIRTIO_NET_CTRL_MAC , + .cmd =VIRTIO_NET_CTRL_MAC_ADDR_SET , + };Can we build this directly from the
cmd_out_buffer?
Quoted 8 lines
Quoted 6 lines
net/vhost-vdpa.c static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s, size_t out_len, · line 388
Quoted 3 lines
net/vhost-vdpa.c +3
-0+char *cursor = s->cvq_cmd_out_buffer; +ssize_t dev_written; +virtio_net_ctrl_ack state;I think we can read the status directly from the
cmd_in_buffer.Directly casting it to
virtio_net_ctrl_ack? Sure.
Yes.
Thanks
Quoted 38 lines
Thanks!
Quoted 34 lines
Thanks
Quoted 31 lines
net/vhost-vdpa.c +20
-1+ +memcpy (cursor, &ctrl,sizeof (ctrl)); + cursor +=sizeof (ctrl); +memcpy (cursor, n->mac,sizeof (n->mac)); + cursor +=sizeof (n->mac); + + dev_written =vhost_vdpa_net_cvq_add (s,sizeof (ctrl) +sizeof (n->mac), +sizeof (state)); +if (unlikely (dev_written <0 )) { +return dev_written; + } + +memcpy (&state, s->cvq_cmd_in_buffer,sizeof (state)); +return state ==VIRTIO_NET_OK ?0 :-1 ; + } + +return 0 ; +} +static NetClientInfo net_vhost_vdpa_cvq_info = { .type =NET_CLIENT_DRIVER_VHOST_VDPA , .size =sizeof (VhostVDPAState), .receive = vhost_vdpa_receive, .prepare = vhost_vdpa_net_cvq_prepare, + .load = vhost_vdpa_net_load, .stop = vhost_vdpa_net_cvq_stop, .cleanup = vhost_vdpa_cleanup, .has_vnet_hdr = vhost_vdpa_has_vnet_hdr, --2.31.1
PATCH v7 12/12 vdpa: Delete CVQ migration blocker
In reply to Eugenio PérezWe can restore the device state in the destination via CVQ now. Remove the migration blocker.
--- include/hw/virtio/vhost-vdpa.h | 1 - hw/virtio/vhost-vdpa.c | 14 -------------- net/vhost-vdpa.c | 2 -- 3 files changed, 17 deletions(-)
include/hw/virtio/vhost-vdpa.h +0 -1
@@ -35,7 +35,6 @@ typedef struct vhost_vdpa {bool shadow_vqs_enabled;/* IOVA mapping used by the Shadow Virtqueue */ VhostIOVATree *iova_tree; -Error *migration_blocker;GPtrArray *shadow_vqs;const VhostShadowVirtqueueOps *shadow_vq_ops;void *shadow_vq_ops_opaque;
hw/virtio/vhost-vdpa.c +0 -14
@@ -1033,13 +1033,6 @@ static bool vhost_vdpa_svqs_start(struct vhost_dev *dev)return true; } -if (v->migration_blocker) { -int r =migrate_add_blocker (v->migration_blocker, &err); -if (unlikely (r <0 )) { -return false; - } - } -for (i =0 ; i < v->shadow_vqs->len; ++i) {VirtQueue *vq =virtio_get_queue (dev->vdev, dev->vq_index + i);VhostShadowVirtqueue *svq =g_ptr_array_index (v->shadow_vqs, i);
@@ -1082,10 +1075,6 @@ err:vhost_svq_stop (svq); } -if (v->migration_blocker) { -migrate_del_blocker (v->migration_blocker); - } -return false; }
@@ -1105,9 +1094,6 @@ static bool vhost_vdpa_svqs_stop(struct vhost_dev *dev) } } -if (v->migration_blocker) { -migrate_del_blocker (v->migration_blocker); - }return true; }
net/vhost-vdpa.c +0 -2
@@ -558,8 +558,6 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer, s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops; s->vhost_vdpa.shadow_vq_ops_opaque = s; -error_setg (&s->vhost_vdpa.migration_blocker, -"Migration disabled: vhost-vdpa uses CVQ." ); } ret =vhost_vdpa_add (nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);if (ret) {
Signature · 1 line
2.31.1
Re: [PATCH v7 12/12] vdpa: Delete CVQ migration blocker
Quoted 5 lines · Eugenio Pérez
We can restore the device state in the destination via CVQ now. Remove the migration blocker.
Signed-off-by Eugenio Pérez <[email protected]>
Quoted 73 lines
--- include/hw/virtio/vhost-vdpa.h | 1 - hw/virtio/vhost-vdpa.c | 14 -------------- net/vhost-vdpa.c | 2 -- 3 files changed, 17 deletions(-)include/hw/virtio/vhost-vdpa.h +0
-1@@ -35,7 +35,6 @@ typedef struct vhost_vdpa {bool shadow_vqs_enabled;/* IOVA mapping used by the Shadow Virtqueue */ VhostIOVATree *iova_tree; -Error *migration_blocker;GPtrArray *shadow_vqs;const VhostShadowVirtqueueOps *shadow_vq_ops;void *shadow_vq_ops_opaque;hw/virtio/vhost-vdpa.c +0
-14@@ -1033,13 +1033,6 @@ static bool vhost_vdpa_svqs_start(struct vhost_dev *dev)return true; } -if (v->migration_blocker) { -int r =migrate_add_blocker (v->migration_blocker, &err); -if (unlikely (r <0 )) { -return false; - } - } -for (i =0 ; i < v->shadow_vqs->len; ++i) {VirtQueue *vq =virtio_get_queue (dev->vdev, dev->vq_index + i);VhostShadowVirtqueue *svq =g_ptr_array_index (v->shadow_vqs, i);@@ -1082,10 +1075,6 @@ err:vhost_svq_stop (svq); } -if (v->migration_blocker) { -migrate_del_blocker (v->migration_blocker); - } -return false; }@@ -1105,9 +1094,6 @@ static bool vhost_vdpa_svqs_stop(struct vhost_dev *dev) } } -if (v->migration_blocker) { -migrate_del_blocker (v->migration_blocker); - }return true; }net/vhost-vdpa.c +0
-3@@ -558,8 +558,6 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer, s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops; s->vhost_vdpa.shadow_vq_ops_opaque = s; -error_setg (&s->vhost_vdpa.migration_blocker, -"Migration disabled: vhost-vdpa uses CVQ." ); } ret =vhost_vdpa_add (nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);if (ret) { --2.31.1