Skip to contentSkip to conversation

usb: typec: tcpci_rt1711h: Add compatible with rt1715

PATCH In review Gene Chen 3 participants 15 messages Aug 5, 2022 – Aug 8, 2022

Subsystems (4)
lore
Share & tools
lore

Gene Chen

author
#0 lore raw

v4 cover usb: typec: tcpci_rt1711h: Add compatible with rt1715

This patch series add binding document for rt1711h and compatible driver with rt1715. Also add different remote rp workaround and initial phy setting.

Gene Chen (7)
- dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
- usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn
- usb: typec: tcpci_rt1711h: Add regulator support when source vbus
- usb: typec: tcpci_rt1711h: Add initial phy setting
- usb: typec: tcpci_rt1711h: Add compatible id with rt1715
- usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common
- usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level

 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml |  100 ++++++++
 drivers/usb/typec/tcpm/tcpci.c                             |   22 -
 drivers/usb/typec/tcpm/tcpci_rt1711h.c                     |  150 +++++++++++--
 include/linux/usb/tcpci.h                                  |   22 +
 4 files changed, 259 insertions(+), 35 deletions(-)

changelogs between v3 & v4
- remove reshuffling header
- fix commit message typo

changelogs between v2 & v3
- binding compatible name with did to validate chip
- remove postfix name "_mask"
- move get cc status macro to header

changelogs between v1 & v2
- Seperate patch by specific purpose
- Fix binding document error
- Set cc change woakaround without using tcpci ops callback

author
#1 lore raw

PATCH v4 1/7 dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H

From: Gene Chen <[email protected]>

Add binding for Richtek RT1711H

---
 .../devicetree/bindings/usb/richtek,rt1711h.yaml   | 100 +++++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml new file +100 -0
new file mode 100644
index 0000000..1999f61
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Gene Chen <[email protected]>
+
+description: |
+  The RT1711H is a USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1711h
+      - richtek,rt1715
+    description:
+      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1711h@4e {
+        compatible = "richtek,rt1711h";
+        reg = <0x4e>;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          data-role = "dual";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          op-sink-microwatt = <10000000>;
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+            port@2 {
+              reg = <2>;
+              endpoint {
+                remote-endpoint = <&dp_aux>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v4 2/7 usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn

In reply to Gene Chen

From: Gene Chen <[email protected]>

replace overwrite whole register with update bits

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +4 -2
index 3291ca4..f2f1fb0 100644
@@ -5,6 +5,7 @@
  * Richtek RT1711H Type-C Chip Driver
  */
 
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
@@ -23,6 +24,7 @@
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN	BIT(3)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -109,8 +111,8 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 {
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
 
-	return rt1711h_write8(chip, RT1711H_RTCTRL8,
-			      RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
Signature · 1 line
2.7.4
Reviewed-by on v4 2/7
#3 lore raw

Re: [PATCH v4 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn

Quoted 5 lines · Gene Chen

From: Gene Chen <[email protected]>

replace overwrite whole register with update bits

Quoted 38 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +4 -2
index 3291ca4..f2f1fb0 100644
@@ -5,6 +5,7 @@
  * Richtek RT1711H Type-C Chip Driver
  */
 
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
@@ -23,6 +24,7 @@
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN	BIT(3)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -109,8 +111,8 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 {
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
 
-	return rt1711h_write8(chip, RT1711H_RTCTRL8,
-			      RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
Signature · 1 line
2.7.4
maintainer Reviewed-by on v4 2/7
#4 lore raw

Re: [PATCH v4 2/7] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn

In reply to Gene Chen
Quoted 5 lines · Gene Chen

From: Gene Chen <[email protected]>

replace overwrite whole register with update bits

Quoted 37 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +4 -2
index 3291ca4..f2f1fb0 100644
@@ -5,6 +5,7 @@
  * Richtek RT1711H Type-C Chip Driver
  */
 
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
@@ -23,6 +24,7 @@
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
+#define RT1711H_AUTOIDLEEN	BIT(3)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -109,8 +111,8 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 {
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
 
-	return rt1711h_write8(chip, RT1711H_RTCTRL8,
-			      RT1711H_RTCTRL8_SET(0, 1, !enable, 2));
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8,
+				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
Signature · 1 line
2.7.4
Signature · 1 line
heikki
author
#5 lore raw

PATCH v4 3/7 usb: typec: tcpci_rt1711h: Add regulator support when source vbus

In reply to Gene Chen

From: Gene Chen <[email protected]>

Add regulator support when source vbus

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +28 -0
index f2f1fb0..fb19d7b 100644
@@ -14,6 +14,7 @@
 #include <linux/usb/tcpci.h>
 #include <linux/usb/tcpm.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
@@ -41,6 +42,8 @@ struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
 	struct device *dev;
+	struct regulator *vbus;
+	bool src_en;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -104,6 +107,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 
 	/* dcSRC.DRP : 33% */
 	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+			    bool src, bool snk)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+
+	if (chip->src_en == src)
+		return 0;
+
+	if (src)
+		ret = regulator_enable(chip->vbus);
+	else
+		ret = regulator_disable(chip->vbus);
+
+	if (!ret)
+		chip->src_en = src;
+	return ret;
 }
 
 static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
@@ -247,7 +270,12 @@ static int rt1711h_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	chip->vbus = devm_regulator_get(&client->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
 	chip->data.init = rt1711h_init;
+	chip->data.set_vbus = rt1711h_set_vbus;
 	chip->data.set_vconn = rt1711h_set_vconn;
 	chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
Signature · 1 line
2.7.4
Reviewed-by on v4 3/7
#6 lore raw

Re: [PATCH v4 3/7] usb: typec: tcpci_rt1711h: Add regulator support when source vbus

Quoted 32 lines · Gene Chen

From: Gene Chen <[email protected]>

Add regulator support when source vbus

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +3 -0
index f2f1fb0..fb19d7b 100644
@@ -14,6 +14,7 @@
 #include <linux/usb/tcpci.h>
 #include <linux/usb/tcpm.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
@@ -41,6 +42,8 @@ struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
 	struct device *dev;
+	struct regulator *vbus;
+	bool src_en;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)

drivers/usb/typec/tcpm/tcpci_rt1711h.c static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) · line 110

Quoted 4 lines
drivers/usb/typec/tcpm/tcpci_rt1711h.c +1 -0
@@ -104,6 +107,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 
 	/* dcSRC.DRP : 33% */
 	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+

Nit: unnecessary empty line

Otherwise

Quoted 38 lines
drivers/usb/typec/tcpm/tcpci_rt1711h.c +24 -0
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+			    bool src, bool snk)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+
+	if (chip->src_en == src)
+		return 0;
+
+	if (src)
+		ret = regulator_enable(chip->vbus);
+	else
+		ret = regulator_disable(chip->vbus);
+
+	if (!ret)
+		chip->src_en = src;
+	return ret;
 }
 
 static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
@@ -247,7 +270,12 @@ static int rt1711h_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	chip->vbus = devm_regulator_get(&client->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
 	chip->data.init = rt1711h_init;
+	chip->data.set_vbus = rt1711h_set_vbus;
 	chip->data.set_vconn = rt1711h_set_vconn;
 	chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
Signature · 1 line
2.7.4
author
#7 lore raw

PATCH v4 4/7 usb: typec: tcpci_rt1711h: Add initial phy setting

In reply to Gene Chen

From: Gene Chen <[email protected]>

Add initial phy setting about phy dicard retry,
rx filter deglitch time and BMC-encoded wait time

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +14 -1
index fb19d7b..5c51d04 100644
@@ -19,6 +19,9 @@
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
 
+#define RT1711H_PHYCTRL1	0x80
+#define RT1711H_PHYCTRL2	0x81
+
 #define RT1711H_RTCTRL8		0x9B
 
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
@@ -106,8 +109,18 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 		return ret;
 
 	/* dcSRC.DRP : 33% */
-	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	if (ret < 0)
+		return ret;
+
+	/* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */
+	ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+	if (ret < 0)
+		return ret;
 
+	/* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+	/* wait time : (val * .4167) us */
+	return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
 }
 
 static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
Signature · 1 line
2.7.4
maintainer Reviewed-by on v4 4/7
#8 lore raw

Re: [PATCH v4 4/7] usb: typec: tcpci_rt1711h: Add initial phy setting

Quoted 7 lines · Gene Chen

From: Gene Chen <[email protected]>

Add initial phy setting about phy dicard retry,
rx filter deglitch time and BMC-encoded wait time

Quoted 40 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +14 -1
index fb19d7b..5c51d04 100644
@@ -19,6 +19,9 @@
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
 
+#define RT1711H_PHYCTRL1	0x80
+#define RT1711H_PHYCTRL2	0x81
+
 #define RT1711H_RTCTRL8		0x9B
 
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
@@ -106,8 +109,18 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 		return ret;
 
 	/* dcSRC.DRP : 33% */
-	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+	if (ret < 0)
+		return ret;
+
+	/* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */
+	ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1);
+	if (ret < 0)
+		return ret;
 
+	/* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */
+	/* wait time : (val * .4167) us */
+	return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62);
 }
 
 static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
Signature · 1 line
2.7.4
Signature · 1 line
heikki
author
#9 lore raw

PATCH v4 5/7 usb: typec: tcpci_rt1711h: Add compatible id with rt1715

In reply to Gene Chen

From: Gene Chen <[email protected]>

Add compatible id with rt1715, and add initial setting for specific support PD30 command.

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 43 +++++++++++++++++++++++++++-------
 1 file changed, 34 insertions(+), 9 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +34 -9
index 5c51d04..ff7deae 100644
@@ -18,6 +18,8 @@
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
+#define RT1711H_DID		0x2171
+#define RT1715_DID		0x2173
 
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
@@ -29,6 +31,7 @@
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
 #define RT1711H_AUTOIDLEEN	BIT(3)
+#define RT1711H_ENEXTMSG	BIT(4)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -47,6 +50,7 @@ struct rt1711h_chip {
 	struct device *dev;
 	struct regulator *vbus;
 	bool src_en;
+	u16 did;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -83,8 +87,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
 
 static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 {
-	int ret;
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	struct regmap *regmap = chip->data.regmap;
+	int ret;
 
 	/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
@@ -92,6 +97,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 	if (ret < 0)
 		return ret;
 
+	/* Enable PD30 extended message for RT1715 */
+	if (chip->did == RT1715_DID) {
+		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* I2C reset : (val + 1) * 12.5ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
 			     RT1711H_RTCTRL11_SET(1, 0x0F));
@@ -229,7 +242,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
 	return 0;
 }
 
-static int rt1711h_check_revision(struct i2c_client *i2c)
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
 {
 	int ret;
 
@@ -247,7 +260,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
 		dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
 		return -ENODEV;
 	}
-	return 0;
+	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+	if (ret < 0)
+		return ret;
+	if (ret != chip->did) {
+		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+	return ret;
 }
 
 static int rt1711h_probe(struct i2c_client *client,
@@ -256,16 +277,18 @@ static int rt1711h_probe(struct i2c_client *client,
 	int ret;
 	struct rt1711h_chip *chip;
 
-	ret = rt1711h_check_revision(client);
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->did = (size_t)device_get_match_data(&client->dev);
+
+	ret = rt1711h_check_revision(client, chip);
 	if (ret < 0) {
 		dev_err(&client->dev, "check vid/pid fail\n");
 		return ret;
 	}
 
-	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
 	chip->data.regmap = devm_regmap_init_i2c(client,
 						 &rt1711h_regmap_config);
 	if (IS_ERR(chip->data.regmap))
@@ -316,13 +339,15 @@ static int rt1711h_remove(struct i2c_client *client)
 
 static const struct i2c_device_id rt1711h_id[] = {
 	{ "rt1711h", 0 },
+	{ "rt1715", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rt1711h_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id rt1711h_of_match[] = {
-	{ .compatible = "richtek,rt1711h", },
+	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rt1711h_of_match);
Signature · 1 line
2.7.4
Reviewed-by on v4 5/7
#10 lore raw

Re: [PATCH v4 5/7] usb: typec: tcpci_rt1711h: Add compatible id with rt1715

Quoted 7 lines · Gene Chen

From: Gene Chen <[email protected]>

Add compatible id with rt1715, and add initial setting for specific support PD30 command.

Quoted 129 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 43 +++++++++++++++++++++++++++-------
 1 file changed, 34 insertions(+), 9 deletions(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +34 -9
index 5c51d04..ff7deae 100644
@@ -18,6 +18,8 @@
 
 #define RT1711H_VID		0x29CF
 #define RT1711H_PID		0x1711
+#define RT1711H_DID		0x2171
+#define RT1715_DID		0x2173
 
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
@@ -29,6 +31,7 @@
 			    (((ck300) << 7) | ((ship_off) << 5) | \
 			    ((auto_idle) << 3) | ((tout) & 0x07))
 #define RT1711H_AUTOIDLEEN	BIT(3)
+#define RT1711H_ENEXTMSG	BIT(4)
 
 #define RT1711H_RTCTRL11	0x9E
 
@@ -47,6 +50,7 @@ struct rt1711h_chip {
 	struct device *dev;
 	struct regulator *vbus;
 	bool src_en;
+	u16 did;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -83,8 +87,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata)
 
 static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 {
-	int ret;
 	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	struct regmap *regmap = chip->data.regmap;
+	int ret;
 
 	/* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL8,
@@ -92,6 +97,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 	if (ret < 0)
 		return ret;
 
+	/* Enable PD30 extended message for RT1715 */
+	if (chip->did == RT1715_DID) {
+		ret = regmap_update_bits(regmap, RT1711H_RTCTRL8,
+					 RT1711H_ENEXTMSG, RT1711H_ENEXTMSG);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* I2C reset : (val + 1) * 12.5ms */
 	ret = rt1711h_write8(chip, RT1711H_RTCTRL11,
 			     RT1711H_RTCTRL11_SET(1, 0x0F));
@@ -229,7 +242,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip)
 	return 0;
 }
 
-static int rt1711h_check_revision(struct i2c_client *i2c)
+static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip)
 {
 	int ret;
 
@@ -247,7 +260,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c)
 		dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
 		return -ENODEV;
 	}
-	return 0;
+	ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV);
+	if (ret < 0)
+		return ret;
+	if (ret != chip->did) {
+		dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret);
+		return -ENODEV;
+	}
+	dev_dbg(&i2c->dev, "did is 0x%04x\n", ret);
+	return ret;
 }
 
 static int rt1711h_probe(struct i2c_client *client,
@@ -256,16 +277,18 @@ static int rt1711h_probe(struct i2c_client *client,
 	int ret;
 	struct rt1711h_chip *chip;
 
-	ret = rt1711h_check_revision(client);
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->did = (size_t)device_get_match_data(&client->dev);
+
+	ret = rt1711h_check_revision(client, chip);
 	if (ret < 0) {
 		dev_err(&client->dev, "check vid/pid fail\n");
 		return ret;
 	}
 
-	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
 	chip->data.regmap = devm_regmap_init_i2c(client,
 						 &rt1711h_regmap_config);
 	if (IS_ERR(chip->data.regmap))
@@ -316,13 +339,15 @@ static int rt1711h_remove(struct i2c_client *client)
 
 static const struct i2c_device_id rt1711h_id[] = {
 	{ "rt1711h", 0 },
+	{ "rt1715", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rt1711h_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id rt1711h_of_match[] = {
-	{ .compatible = "richtek,rt1711h", },
+	{ .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID },
+	{ .compatible = "richtek,rt1715", .data = (void *)RT1715_DID },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rt1711h_of_match);
Signature · 1 line
2.7.4
author
#11 lore raw

PATCH v4 6/7 usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common

In reply to Gene Chen

From: Gene Chen <[email protected]>

Move transition function "tcpci_to_typec_cc" to common header

---
 drivers/usb/typec/tcpm/tcpci.c | 22 ----------------------
 include/linux/usb/tcpci.h      | 22 ++++++++++++++++++++++
 2 files changed, 22 insertions(+), 22 deletions(-)
drivers/usb/typec/tcpm/tcpci.c +0 -22
index 8127847..50674ec 100644
@@ -27,11 +27,6 @@
 #define	VPPS_VALID_MIN_MV			100
 #define	VSINKDISCONNECT_PD_MIN_PERCENT		90
 
-#define tcpc_presenting_rd(reg, cc) \
-	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
-	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
-	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
-
 struct tcpci {
 	struct device *dev;
 
@@ -218,23 +213,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc,
 			    TCPC_CMD_LOOK4CONNECTION);
 }
 
-static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
-{
-	switch (cc) {
-	case 0x1:
-		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
-	case 0x2:
-		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
-	case 0x3:
-		if (sink)
-			return TYPEC_CC_RP_3_0;
-		fallthrough;
-	case 0x0:
-	default:
-		return TYPEC_CC_OPEN;
-	}
-}
-
 static int tcpci_get_cc(struct tcpc_dev *tcpc,
 			enum typec_cc_status *cc1, enum typec_cc_status *cc2)
 {
include/linux/usb/tcpci.h +22 -0
index 20c0bed..1765745 100644
@@ -167,6 +167,11 @@
 /* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */
 #define TCPC_TRANSMIT_BUFFER_MAX_LEN		31
 
+#define tcpc_presenting_rd(reg, cc) \
+	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
+	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
+
 struct tcpci;
 
 /*
@@ -207,4 +212,21 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci);
 
 struct tcpm_port;
 struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci);
+
+static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
+{
+	switch (cc) {
+	case 0x1:
+		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
+	case 0x2:
+		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
+	case 0x3:
+		if (sink)
+			return TYPEC_CC_RP_3_0;
+		fallthrough;
+	case 0x0:
+	default:
+		return TYPEC_CC_OPEN;
+	}
+}
 #endif /* __LINUX_USB_TCPCI_H */
Signature · 1 line
2.7.4
Reviewed-by on v4 6/7
#12 lore raw

Re: [PATCH v4 6/7] usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common

Quoted 6 lines · Gene Chen

From: Gene Chen <[email protected]>

Move transition function "tcpci_to_typec_cc" to common header

Quoted 86 lines
---
 drivers/usb/typec/tcpm/tcpci.c | 22 ----------------------
 include/linux/usb/tcpci.h      | 22 ++++++++++++++++++++++
 2 files changed, 22 insertions(+), 22 deletions(-)
drivers/usb/typec/tcpm/tcpci.c +0 -22
index 8127847..50674ec 100644
@@ -27,11 +27,6 @@
 #define	VPPS_VALID_MIN_MV			100
 #define	VSINKDISCONNECT_PD_MIN_PERCENT		90
 
-#define tcpc_presenting_rd(reg, cc) \
-	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
-	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
-	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
-
 struct tcpci {
 	struct device *dev;
 
@@ -218,23 +213,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc,
 			    TCPC_CMD_LOOK4CONNECTION);
 }
 
-static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
-{
-	switch (cc) {
-	case 0x1:
-		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
-	case 0x2:
-		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
-	case 0x3:
-		if (sink)
-			return TYPEC_CC_RP_3_0;
-		fallthrough;
-	case 0x0:
-	default:
-		return TYPEC_CC_OPEN;
-	}
-}
-
 static int tcpci_get_cc(struct tcpc_dev *tcpc,
 			enum typec_cc_status *cc1, enum typec_cc_status *cc2)
 {
include/linux/usb/tcpci.h +22 -0
index 20c0bed..1765745 100644
@@ -167,6 +167,11 @@
 /* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */
 #define TCPC_TRANSMIT_BUFFER_MAX_LEN		31
 
+#define tcpc_presenting_rd(reg, cc) \
+	(!(TCPC_ROLE_CTRL_DRP & (reg)) && \
+	 (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \
+	  (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT)))
+
 struct tcpci;
 
 /*
@@ -207,4 +212,21 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci);
 
 struct tcpm_port;
 struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci);
+
+static inline enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink)
+{
+	switch (cc) {
+	case 0x1:
+		return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA;
+	case 0x2:
+		return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD;
+	case 0x3:
+		if (sink)
+			return TYPEC_CC_RP_3_0;
+		fallthrough;
+	case 0x0:
+	default:
+		return TYPEC_CC_OPEN;
+	}
+}
 #endif /* __LINUX_USB_TCPCI_H */
Signature · 1 line
2.7.4
author
#13 lore raw

PATCH v4 7/7 usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level

In reply to Gene Chen

From: Gene Chen <[email protected]>

Fix CC PHY noise filter of voltage level according to current cc voltage level

---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 58 +++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +57 -1
index ff7deae..5dc34f9 100644
@@ -24,8 +24,11 @@
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
 
-#define RT1711H_RTCTRL8		0x9B
+#define RT1711H_RTCTRL4		0x93
+/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
+#define RT1711H_BMCIO_RXDZSEL	BIT(0)
 
+#define RT1711H_RTCTRL8		0x9B
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
@@ -44,6 +47,10 @@
 #define RT1711H_RTCTRL15	0xA2
 #define RT1711H_RTCTRL16	0xA3
 
+#define RT1711H_RTCTRL18	0xAF
+/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
+#define BMCIO_RXDZEN	BIT(0)
+
 struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
@@ -164,6 +171,53 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
+/*
+ * Selects the CC PHY noise filter voltage level according to the remote current
+ * CC voltage level.
+ *
+ * @status: The port's current cc status read from IC
+ * Return 0 if writes succeed; failure code otherwise
+ */
+static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
+{
+	int ret, cc1, cc2;
+	u8 role = 0;
+	u32 rxdz_en, rxdz_sel;
+
+	ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
+	if (ret < 0)
+		return ret;
+
+	cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
+				TCPC_CC_STATUS_CC1_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC1));
+	cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
+				TCPC_CC_STATUS_CC2_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC2));
+
+	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
+	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
+		rxdz_en = BMCIO_RXDZEN;
+		if (chip->did == RT1715_DID)
+			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+		else
+			rxdz_sel = 0;
+	} else {
+		rxdz_en = 0;
+		rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+	}
+
+	ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
+				 BMCIO_RXDZEN, rxdz_en);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
+				  RT1711H_BMCIO_RXDZSEL, rxdz_sel);
+}
+
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
 				      struct tcpci_data *tdata,
 				      enum typec_cc_status cc)
@@ -224,6 +278,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id)
 		/* Clear cc change event triggered by starting toggling */
 		if (status & TCPC_CC_STATUS_TOGGLING)
 			rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
+		else
+			rt1711h_init_cc_params(chip, status);
 	}
 
 out:
Signature · 1 line
2.7.4
Reviewed-by on v4 7/7
#14 lore raw

Re: [PATCH v4 7/7] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level

Quoted 7 lines · Gene Chen

From: Gene Chen <[email protected]>

Fix CC PHY noise filter of voltage level according to current cc voltage level

Quoted 98 lines
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 58 +++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpci_rt1711h.c +57 -1
index ff7deae..5dc34f9 100644
@@ -24,8 +24,11 @@
 #define RT1711H_PHYCTRL1	0x80
 #define RT1711H_PHYCTRL2	0x81
 
-#define RT1711H_RTCTRL8		0x9B
+#define RT1711H_RTCTRL4		0x93
+/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
+#define RT1711H_BMCIO_RXDZSEL	BIT(0)
 
+#define RT1711H_RTCTRL8		0x9B
 /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
 #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
 			    (((ck300) << 7) | ((ship_off) << 5) | \
@@ -44,6 +47,10 @@
 #define RT1711H_RTCTRL15	0xA2
 #define RT1711H_RTCTRL16	0xA3
 
+#define RT1711H_RTCTRL18	0xAF
+/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
+#define BMCIO_RXDZEN	BIT(0)
+
 struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
@@ -164,6 +171,53 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
 				  RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
 }
 
+/*
+ * Selects the CC PHY noise filter voltage level according to the remote current
+ * CC voltage level.
+ *
+ * @status: The port's current cc status read from IC
+ * Return 0 if writes succeed; failure code otherwise
+ */
+static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
+{
+	int ret, cc1, cc2;
+	u8 role = 0;
+	u32 rxdz_en, rxdz_sel;
+
+	ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
+	if (ret < 0)
+		return ret;
+
+	cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
+				TCPC_CC_STATUS_CC1_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC1));
+	cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
+				TCPC_CC_STATUS_CC2_MASK,
+				status & TCPC_CC_STATUS_TERM ||
+				tcpc_presenting_rd(role, CC2));
+
+	if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
+	    (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
+		rxdz_en = BMCIO_RXDZEN;
+		if (chip->did == RT1715_DID)
+			rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+		else
+			rxdz_sel = 0;
+	} else {
+		rxdz_en = 0;
+		rxdz_sel = RT1711H_BMCIO_RXDZSEL;
+	}
+
+	ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
+				 BMCIO_RXDZEN, rxdz_en);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
+				  RT1711H_BMCIO_RXDZSEL, rxdz_sel);
+}
+
 static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
 				      struct tcpci_data *tdata,
 				      enum typec_cc_status cc)
@@ -224,6 +278,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id)
 		/* Clear cc change event triggered by starting toggling */
 		if (status & TCPC_CC_STATUS_TOGGLING)
 			rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
+		else
+			rt1711h_init_cc_params(chip, status);
 	}
 
 out:
Signature · 1 line
2.7.4