Skip to contentSkip to conversation

package/pistache: fix dependency on rapidjson

PATCH Applied Thomas Petazzoni via buildroot 3 participants 8 messages Aug 4, 2022 – Sep 14, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 package/pistache: fix dependency on rapidjson

rapidjson has been added as a dependency of pistache as part of commit 2f3218567953185008ec862f814bebecb9d6ed82 ("package/pistache: bump version & switch to meson build"), using a "depends on". However, as it is a library dependency, a "select" is normally used in Buildroot.

rapidjson's only dependency is on C++ support, which is already a dependency of pistache.

In addition, use = instead of += for the rapidjson dependency in the .mk file, as it's an unconditional dependency.

Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>
---
 package/pistache/Config.in   | 2 +-
 package/pistache/pistache.mk | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
package/pistache/Config.in +1 -1
index 806c27077a..53a4b73a58 100644
@@ -4,9 +4,9 @@ config BR2_PACKAGE_PISTACHE
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_PACKAGE_RAPIDJSON
 	depends on !BR2_TOOLCHAIN_USES_UCLIBC
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
+	select BR2_PACKAGE_RAPIDJSON
 	help
 	  Pistache is a modern and elegant HTTP and REST framework
 	  for C++. It is entirely written in pure C++17 and provides
package/pistache/pistache.mk +1 -1
index 65d9b2412c..f4de5e3b2a 100644
@@ -10,7 +10,7 @@ PISTACHE_LICENSE = Apache-2.0
 PISTACHE_LICENSE_FILES = LICENSE
 
 PISTACHE_INSTALL_STAGING = YES
-PISTACHE_DEPENDENCIES += rapidjson
+PISTACHE_DEPENDENCIES = rapidjson
 
 ifeq ($(BR2_PACKAGE_OPENSSL),y)
 PISTACHE_DEPENDENCIES += openssl
Signature · 6 lines
2.37.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH 2/2 package/pistache: enable on uClibc

pistache couldn't build on uClibc due to just one missing definition. In addition, the Config.in comment was wrong as it said that a glibc toolchain was needed, while in fact it could be glibc or musl.

Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>
---
 ...port.cc-fallback-value-for-RUSAGE_TH.patch | 33 +++++++++++++++++++
 package/pistache/Config.in                    |  4 +--
 2 files changed, 34 insertions(+), 3 deletions(-)
 create mode 100644 package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch
package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch new file +33 -0
new file mode 100644
index 0000000000..327933e26d
@@ -0,0 +1,33 @@
+From 5feed6d2f86750bfe1e7c26d6fd4e8d2195ea81f Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Thu, 4 Aug 2022 19:54:23 +0200
+Subject: [PATCH] src/common/transport.cc: fallback value for RUSAGE_THREAD
+
+uClibc-ng currently does not define RUSAGE_THREAD, so let's add a
+fallback value until it gets fixed in uClibc-ng. The value is the same
+on all Linux systems, regardless of the CPU architecture.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Upstream bug: https://mailman.openadk.org/mailman3/hyperkitty/list/[email protected]/thread/MEXOUSFSH46UFS3AEMEIEPTL5U4HVEFL/
+---
+ src/common/transport.cc | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/common/transport.cc b/src/common/transport.cc
+index 62efb8c..0f3abb0 100644
+--- a/src/common/transport.cc
++++ b/src/common/transport.cc
+@@ -515,6 +515,10 @@ namespace Pistache::Tcp
+ 
+         rusage now;
+ 
++#if !defined(RUSAGE_THREAD)
++#define RUSAGE_THREAD 1
++#endif
++
+         auto res = getrusage(RUSAGE_THREAD, &now);
+         if (res == -1)
+             loadRequest_.reject(std::runtime_error("Could not compute usage"));
+-- 
+2.37.1
+
package/pistache/Config.in +1 -3
index 53a4b73a58..3acf1f53f0 100644
@@ -4,7 +4,6 @@ config BR2_PACKAGE_PISTACHE
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_TOOLCHAIN_USES_UCLIBC
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
 	select BR2_PACKAGE_RAPIDJSON
 	help
@@ -14,9 +13,8 @@ config BR2_PACKAGE_PISTACHE
 
 	  https://github.com/oktal/pistache
 
-comment "pistache needs a glibc toolchain w/ C++, gcc >= 7, threads, wchar, not binutils bug 27597"
+comment "pistache needs a toolchain w/ C++, gcc >= 7, threads, wchar, not binutils bug 27597"
 	depends on !BR2_INSTALL_LIBSTDCPP || \
-		   BR2_TOOLCHAIN_USES_UCLIBC || \
 		   !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \
 		   !BR2_TOOLCHAIN_HAS_THREADS || \
 		   !BR2_USE_WCHAR || \
Signature · 6 lines
2.37.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw

Re: [Buildroot] [PATCH 2/2] package/pistache: enable on uClibc

Thomas², All,

Thomas R., a note for you toward the end...

On 2022-08-04 22:35 +0200, Thomas Petazzoni via buildroot spake thusly:

Quoted 4 lines

pistache couldn't build on uClibc due to just one missing definition. In addition, the Config.in comment was wrong as it said that a glibc toolchain was needed, while in fact it could be glibc or musl.

As I understand, this patch is not really upstreamable, or at least not in this state.

However, this means we will have to carry over and over, because existing uclibc-based toolchains will still be usad in the future, even when newer uclibc-ng contains the new definitions, so we can't drop this patch because it may always needed when using external toolchains...

So, I think a version that is upstreamable would be nice...

Thomas R.: Thomas P. noticed a very nasty beha viour for pistache: it will forcibly register git hooks when it is built, if it finds that it is built in a git tree.

This is very nasty, because in our case, developping Buildroot the pistache sources are extacted from a tarball, but there is a git tree to be found higher up: it finds Buildroot's own git tree, s registers git hooks in that repository, and the results is obviously wrong and prevents properly working:

thomas@windsurf:~/projets/buildroot (pistache-fix)$ make pistache-extract pistache-3ec9d7c4f8b828fdd391550fff81b01e72dd6269.tar.gz: OK (sha256: f2b3e8b2581cfed5e036d1b97a9b97dc7022b3ddaab69c4691238faff3199bc1) >>> pistache 3ec9d7c4f8b828fdd391550fff81b01e72dd6269 Extracting
gzip -d -c /home/thomas/dl/pistache/pistache-3ec9d7c4f8b828fdd391550fff81b01e72dd6269.tar.gz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/pistache-3ec9d7c4f8b828fdd391550fff81b01e72dd6269 -xf -

thomas@windsurf:~/projets/buildroot (pistache-fix)$ git commit
grep: version.txt: No such file or directory
Update the commit date in version.txt before committing

thomas@windsurf:~/projets/buildroot (pistache-fix)$ grep pistache .git/config
hooksPath = /home/thomas/projets/buildroot/output/build/pistache-3ec9d7c4f8b828fdd391550fff81b01e72dd6269/.hooks

See: https://github.com/pistacheio/pistache/blob/master/meson.build#L137 :

if not meson.is_subproject()
git = find_program('git', required: false)
if git.found()
run_command(git, 'config', '--local', 'core.hooksPath', meson.source_root()/'.hooks', check: false)
endif
endif

Could you look into proposing a change upstream, that at the very least makes that hook registration optional?

Regards,
Yann E. MORIN.

Quoted 78 lines
Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>
---
 ...port.cc-fallback-value-for-RUSAGE_TH.patch | 33 +++++++++++++++++++
 package/pistache/Config.in                    |  4 +--
 2 files changed, 34 insertions(+), 3 deletions(-)
 create mode 100644 package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch
package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch new file +33 -0
new file mode 100644
index 0000000000..327933e26d
@@ -0,0 +1,33 @@
+From 5feed6d2f86750bfe1e7c26d6fd4e8d2195ea81f Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Thu, 4 Aug 2022 19:54:23 +0200
+Subject: [PATCH] src/common/transport.cc: fallback value for RUSAGE_THREAD
+
+uClibc-ng currently does not define RUSAGE_THREAD, so let's add a
+fallback value until it gets fixed in uClibc-ng. The value is the same
+on all Linux systems, regardless of the CPU architecture.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Upstream bug: https://mailman.openadk.org/mailman3/hyperkitty/list/[email protected]/thread/MEXOUSFSH46UFS3AEMEIEPTL5U4HVEFL/
+---
+ src/common/transport.cc | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/common/transport.cc b/src/common/transport.cc
+index 62efb8c..0f3abb0 100644
+--- a/src/common/transport.cc
++++ b/src/common/transport.cc
+@@ -515,6 +515,10 @@ namespace Pistache::Tcp
+ 
+         rusage now;
+ 
++#if !defined(RUSAGE_THREAD)
++#define RUSAGE_THREAD 1
++#endif
++
+         auto res = getrusage(RUSAGE_THREAD, &now);
+         if (res == -1)
+             loadRequest_.reject(std::runtime_error("Could not compute usage"));
+-- 
+2.37.1
+
package/pistache/Config.in +1 -3
index 53a4b73a58..3acf1f53f0 100644
@@ -4,7 +4,6 @@ config BR2_PACKAGE_PISTACHE
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_TOOLCHAIN_USES_UCLIBC
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
 	select BR2_PACKAGE_RAPIDJSON
 	help
@@ -14,9 +13,8 @@ config BR2_PACKAGE_PISTACHE
 
 	  https://github.com/oktal/pistache
 
-comment "pistache needs a glibc toolchain w/ C++, gcc >= 7, threads, wchar, not binutils bug 27597"
+comment "pistache needs a toolchain w/ C++, gcc >= 7, threads, wchar, not binutils bug 27597"
 	depends on !BR2_INSTALL_LIBSTDCPP || \
-		   BR2_TOOLCHAIN_USES_UCLIBC || \
 		   !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \
 		   !BR2_TOOLCHAIN_HAS_THREADS || \
 		   !BR2_USE_WCHAR || \
Signature · 6 lines
2.37.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#3 lore raw

Re: [Buildroot] [PATCH 2/2] package/pistache: enable on uClibc

Hello,

Quoted 7 lines · On Fri, 5 Aug 2022 18:29:06 +0200 "Yann E. MORIN" <[email protected]>…

As I understand, this patch is not really upstreamable, or at least not in this state.

However, this means we will have to carry over and over, because existing uclibc-based toolchains will still be usad in the future, even when newer uclibc-ng contains the new definitions, so we can't drop this patch because it may always needed when using external toolchains...

No, we will not have to carry it over and over. Regarding uClibc-ng, we require using a reasonably recent version of uClibc-ng. So my plan would be to keep this hack for a few months, until at least the Bootlin uClibc toolchains are rebuilt with a recent enough uClibc-ng, and then drop this hack.

So no, the goal is not to keep this hack patch forever.

What I'm proposing to do for pistache is exactly the same as I did in commit fa4dba4aa202de20e3821eace5513aad81c23275, for openswan. Waldemar was simply proposing to re-enable openswan for uClibc, because uClibc-ng 1.0.41 has the necessary definitions. But in the immediate term, that would have caused build break with Bootlin toolchains. So until they are re-generated, I have added a hack patch that avoids the uClibc build issue entirely, also with the goal of dropping the patch when the toolchains are rebuilt.

Quoted 1 line

So, I think a version that is upstreamable would be nice...

I'm not sure it's worth the effort to introduce more complexity upstream for this missing definition in uClibc. We should just fix it in uClibc (I have already reported the issue), and that's it.

Best regards,

Thomas

Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#4 lore raw

Re: [Buildroot] [PATCH 2/2] package/pistache: enable on uClibc

In reply to Thomas Petazzoni via buildroot

Thomas, All,

On 2022-08-04 22:35 +0200, Thomas Petazzoni via buildroot spake thusly:

Quoted 8 lines

pistache couldn't build on uClibc due to just one missing definition. In addition, the Config.in comment was wrong as it said that a glibc toolchain was needed, while in fact it could be glibc or musl.

Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>

Applied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 75 lines
---
 ...port.cc-fallback-value-for-RUSAGE_TH.patch | 33 +++++++++++++++++++
 package/pistache/Config.in                    |  4 +--
 2 files changed, 34 insertions(+), 3 deletions(-)
 create mode 100644 package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch
package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch new file +33 -0
new file mode 100644
index 0000000000..327933e26d
@@ -0,0 +1,33 @@
+From 5feed6d2f86750bfe1e7c26d6fd4e8d2195ea81f Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <[email protected]>
+Date: Thu, 4 Aug 2022 19:54:23 +0200
+Subject: [PATCH] src/common/transport.cc: fallback value for RUSAGE_THREAD
+
+uClibc-ng currently does not define RUSAGE_THREAD, so let's add a
+fallback value until it gets fixed in uClibc-ng. The value is the same
+on all Linux systems, regardless of the CPU architecture.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Upstream bug: https://mailman.openadk.org/mailman3/hyperkitty/list/[email protected]/thread/MEXOUSFSH46UFS3AEMEIEPTL5U4HVEFL/
+---
+ src/common/transport.cc | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/common/transport.cc b/src/common/transport.cc
+index 62efb8c..0f3abb0 100644
+--- a/src/common/transport.cc
++++ b/src/common/transport.cc
+@@ -515,6 +515,10 @@ namespace Pistache::Tcp
+ 
+         rusage now;
+ 
++#if !defined(RUSAGE_THREAD)
++#define RUSAGE_THREAD 1
++#endif
++
+         auto res = getrusage(RUSAGE_THREAD, &now);
+         if (res == -1)
+             loadRequest_.reject(std::runtime_error("Could not compute usage"));
+-- 
+2.37.1
+
package/pistache/Config.in +1 -3
index 53a4b73a58..3acf1f53f0 100644
@@ -4,7 +4,6 @@ config BR2_PACKAGE_PISTACHE
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_TOOLCHAIN_USES_UCLIBC
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
 	select BR2_PACKAGE_RAPIDJSON
 	help
@@ -14,9 +13,8 @@ config BR2_PACKAGE_PISTACHE
 
 	  https://github.com/oktal/pistache
 
-comment "pistache needs a glibc toolchain w/ C++, gcc >= 7, threads, wchar, not binutils bug 27597"
+comment "pistache needs a toolchain w/ C++, gcc >= 7, threads, wchar, not binutils bug 27597"
 	depends on !BR2_INSTALL_LIBSTDCPP || \
-		   BR2_TOOLCHAIN_USES_UCLIBC || \
 		   !BR2_TOOLCHAIN_GCC_AT_LEAST_7 || \
 		   !BR2_TOOLCHAIN_HAS_THREADS || \
 		   !BR2_USE_WCHAR || \
Signature · 6 lines
2.37.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#5 lore raw
In reply to Thomas Petazzoni via buildroot

Thomas², All,

On 2022-08-04 22:35 +0200, Thomas Petazzoni via buildroot spake thusly:

Quoted 8 lines

rapidjson has been added as a dependency of pistache as part of commit 2f3218567953185008ec862f814bebecb9d6ed82 ("package/pistache: bump version & switch to meson build"), using a "depends on". However, as it is a library dependency, a "select" is normally used in Buildroot.

rapidjson's only dependency is on C++ support, which is already a dependency of pistache.

Quoted 6 lines

In addition, use = instead of += for the rapidjson dependency in the .mk file, as it's an unconditional dependency.

Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>

Applied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 40 lines
---
 package/pistache/Config.in   | 2 +-
 package/pistache/pistache.mk | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
package/pistache/Config.in +1 -1
index 806c27077a..53a4b73a58 100644
@@ -4,9 +4,9 @@ config BR2_PACKAGE_PISTACHE
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_PACKAGE_RAPIDJSON
 	depends on !BR2_TOOLCHAIN_USES_UCLIBC
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
+	select BR2_PACKAGE_RAPIDJSON
 	help
 	  Pistache is a modern and elegant HTTP and REST framework
 	  for C++. It is entirely written in pure C++17 and provides
package/pistache/pistache.mk +1 -1
index 65d9b2412c..f4de5e3b2a 100644
@@ -10,7 +10,7 @@ PISTACHE_LICENSE = Apache-2.0
 PISTACHE_LICENSE_FILES = LICENSE
 
 PISTACHE_INSTALL_STAGING = YES
-PISTACHE_DEPENDENCIES += rapidjson
+PISTACHE_DEPENDENCIES = rapidjson
 
 ifeq ($(BR2_PACKAGE_OPENSSL),y)
 PISTACHE_DEPENDENCIES += openssl
Signature · 6 lines
2.37.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#6 lore raw
In reply to Thomas Petazzoni via buildroot
Quoted 10 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:

rapidjson has been added as a dependency of pistache as part of commit 2f3218567953185008ec862f814bebecb9d6ed82 ("package/pistache: bump version & switch to meson build"), using a "depends on". However, as it is a library dependency, a "select" is normally used in Buildroot.

rapidjson's only dependency is on C++ support, which is already a dependency of pistache.

Quoted 6 lines

In addition, use = instead of += for the rapidjson dependency in the .mk file, as it's an unconditional dependency.

Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>

Committed to 2022.05.x and 2022.02.x, thanks.

Signature · 5 lines
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#7 lore raw
Quoted 11 lines
Quoted 10 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

"Peter" == Peter Korsgaard <[email protected]> writes:

"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:

rapidjson has been added as a dependency of pistache as part of commit 2f3218567953185008ec862f814bebecb9d6ed82 ("package/pistache: bump version & switch to meson build"), using a "depends on". However, as it is a library dependency, a "select" is normally used in Buildroot.

rapidjson's only dependency is on C++ support, which is already a dependency of pistache.

Quoted 8 lines
Quoted 6 lines

In addition, use = instead of += for the rapidjson dependency in the .mk file, as it's an unconditional dependency.

Cc Thomas Ruschival <[email protected]>
Cc Arnout Vandecappelle (Essensium/Mind) <[email protected]>

Committed to 2022.05.x and 2022.02.x, thanks.

Ups, sorry - Meant 2022.05.x only.

Signature · 5 lines
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot