Skip to contentSkip to conversation

asus-wmi: Modify behaviour of Fn+F5 fan key

PATCH Superseded Luke D. Jones 2 participants 3 messages Aug 8, 2022

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Luke D. Jones

author maintainer
#0 lore raw

PATCH 1/2 asus-wmi: Modify behaviour of Fn+F5 fan key

Some more recent TUF laptops have both fan_boost and thermal_throttle. The key code for Fn+F5 is also different and unmapped.

This patch adjusts the asus_wmi_handle_event_code() match to match for both 0x99 and 0xAE, and run both mode switch functions for fan_boost and/or thermal_throttle if either are available.

It is required that both are tried, as in some instances the ACPI set-method for one may not have any code body within it even though it was returned as supported by the get method.

---
 drivers/platform/x86/asus-nb-wmi.c |  1 +
 drivers/platform/x86/asus-wmi.c    | 11 +++++------
 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/platform/x86/asus-nb-wmi.c +1 -0
index a81dc4b191b7..18eec80b7154 100644
@@ -573,6 +573,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0xA5, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + HDMI */
 	{ KE_KEY, 0xA6, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + HDMI */
 	{ KE_KEY, 0xA7, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + HDMI */
+	{ KE_KEY, 0xAE, { KEY_FN_F5 } }, /* Fn+F5 fan mode on 2020+ */
 	{ KE_KEY, 0xB5, { KEY_CALC } },
 	{ KE_KEY, 0xC4, { KEY_KBDILLUMUP } },
 	{ KE_KEY, 0xC5, { KEY_KBDILLUMDOWN } },
drivers/platform/x86/asus-wmi.c +5 -6
index 0e7fbed8a50d..ac06fec0565c 100644
@@ -3099,14 +3099,13 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
 		return;
 	}
 
-	if (asus->fan_boost_mode_available && code == NOTIFY_KBD_FBM) {
-		fan_boost_mode_switch_next(asus);
+	if (code == NOTIFY_KBD_FBM || code == NOTIFY_KBD_TTP) {
+		if (asus->fan_boost_mode_available)
+			fan_boost_mode_switch_next(asus);
+		if (asus->throttle_thermal_policy_available)
+			throttle_thermal_policy_switch_next(asus);
 		return;
-	}
 
-	if (asus->throttle_thermal_policy_available && code == NOTIFY_KBD_TTP) {
-		throttle_thermal_policy_switch_next(asus);
-		return;
 	}
 
 	if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle)
Signature · 1 line
2.37.1
author maintainer
#1 lore raw

PATCH 2/2 asus-wmi: Support the GPU fan on TUF laptops

Add support for TUF laptops which have the ability to control the GPU fan. This will show as a second fan in hwmon, and has the ability to run run as boost (fullspeed), or auto.

---
 drivers/platform/x86/asus-wmi.c            | 71 ++++++++++++++++++++++
 include/linux/platform_data/x86/asus-wmi.h |  1 +
 2 files changed, 72 insertions(+)
drivers/platform/x86/asus-wmi.c +71 -0
index ac06fec0565c..2a74e468591a 100644
@@ -221,7 +221,9 @@ struct asus_wmi {
 	struct asus_rfkill uwb;
 
 	enum fan_type fan_type;
+	enum fan_type gpu_fan_type;
 	int fan_pwm_mode;
+	int gpu_fan_pwm_mode;
 	int agfn_pwm;
 
 	bool fan_boost_mode_available;
@@ -1757,6 +1759,18 @@ static int asus_fan_set_auto(struct asus_wmi *asus)
 		return -ENXIO;
 	}
 
+	/*
+	 * Modern models like G713 also have GPU fan control. This is not AGFN.
+	 */
+	if (asus->gpu_fan_type == FAN_TYPE_SPEC83) {
+		status = asus_wmi_set_devstate(ASUS_WMI_DEVID_GPU_FAN_CTRL,
+					       0, &retval);
+		if (status)
+			return status;
+
+		if (retval != 1)
+			return -EIO;
+	}
 
 	return 0;
 }
@@ -1959,9 +1973,57 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
 		       deci_kelvin_to_millicelsius(value & 0xFFFF));
 }
 
+/* GPU fan on modern ROG laptops */
+static ssize_t pwm2_enable_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus->gpu_fan_pwm_mode);
+}
+
+static ssize_t pwm2_enable_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	int state;
+	int value;
+	int ret;
+	u32 retval;
+
+	ret = kstrtouint(buf, 10, &state);
+	if (ret)
+		return ret;
+
+	switch (state) { /* standard documented hwmon values */
+	case ASUS_FAN_CTRL_FULLSPEED:
+		value = 1;
+		break;
+	case ASUS_FAN_CTRL_AUTO:
+		value = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_GPU_FAN_CTRL,
+				    value, &retval);
+	if (ret)
+		return ret;
+
+	if (retval != 1)
+		return -EIO;
+
+	asus->gpu_fan_pwm_mode = state;
+	return count;
+}
+
 /* Fan1 */
 static DEVICE_ATTR_RW(pwm1);
 static DEVICE_ATTR_RW(pwm1_enable);
+static DEVICE_ATTR_RW(pwm2_enable);
 static DEVICE_ATTR_RO(fan1_input);
 static DEVICE_ATTR_RO(fan1_label);
 
@@ -1971,6 +2033,7 @@ static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
 static struct attribute *hwmon_attributes[] = {
 	&dev_attr_pwm1.attr,
 	&dev_attr_pwm1_enable.attr,
+	&dev_attr_pwm2_enable.attr,
 	&dev_attr_fan1_input.attr,
 	&dev_attr_fan1_label.attr,
 
@@ -1993,6 +2056,9 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
 	    || attr == &dev_attr_pwm1_enable.attr) {
 		if (asus->fan_type == FAN_TYPE_NONE)
 			return 0;
+	} else if (attr == &dev_attr_pwm2_enable.attr) {
+		if (asus->gpu_fan_type == FAN_TYPE_NONE)
+			return 0;
 	} else if (attr == &dev_attr_temp1_input.attr) {
 		int err = asus_wmi_get_devstate(asus,
 						ASUS_WMI_DEVID_THERMAL_CTRL,
@@ -2035,6 +2101,7 @@ static int asus_wmi_hwmon_init(struct asus_wmi *asus)
 
 static int asus_wmi_fan_init(struct asus_wmi *asus)
 {
+	asus->gpu_fan_type = FAN_TYPE_NONE;
 	asus->fan_type = FAN_TYPE_NONE;
 	asus->agfn_pwm = -1;
 
@@ -2043,6 +2110,10 @@ static int asus_wmi_fan_init(struct asus_wmi *asus)
 	else if (asus_wmi_has_agfn_fan(asus))
 		asus->fan_type = FAN_TYPE_AGFN;
 
+	/*  Modern models like G713 also have GPU fan control */
+	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_FAN_CTRL))
+		asus->gpu_fan_type = FAN_TYPE_SPEC83;
+
 	if (asus->fan_type == FAN_TYPE_NONE)
 		return -ENODEV;
 
include/linux/platform_data/x86/asus-wmi.h +1 -0
index a571b47ff362..bcffb77371be 100644
@@ -77,6 +77,7 @@
 #define ASUS_WMI_DEVID_THERMAL_CTRL	0x00110011
 #define ASUS_WMI_DEVID_FAN_CTRL		0x00110012 /* deprecated */
 #define ASUS_WMI_DEVID_CPU_FAN_CTRL	0x00110013
+#define ASUS_WMI_DEVID_GPU_FAN_CTRL	0x00110014
 #define ASUS_WMI_DEVID_CPU_FAN_CURVE	0x00110024
 #define ASUS_WMI_DEVID_GPU_FAN_CURVE	0x00110025
 
Signature · 1 line
2.37.1
#2 lore raw

Re: [PATCH 2/2] asus-wmi: Support the GPU fan on TUF laptops

Quoted 4 lines · Luke D. Jones

Add support for TUF laptops which have the ability to control the GPU fan. This will show as a second fan in hwmon, and has the ability to run run as boost (fullspeed), or auto.

Single 'run' is enough, I believe.

...

drivers/platform/x86/asus-wmi.c static int asus_fan_set_auto(struct asus_wmi *asus) · line 1763

Quoted 2 lines
drivers/platform/x86/asus-wmi.c +2 -0
+       /*
+        * Modern models like G713 also have GPU fan control. This is not AGFN.

like the G713
(Also possibly to surround this subphrase by commas)

...

drivers/platform/x86/asus-wmi.c static ssize_t asus_hwmon_temp1(struct device *dev, · line 1983

Quoted 7 lines
drivers/platform/x86/asus-wmi.c +7 -0
+static ssize_t pwm2_enable_show(struct device *dev,
+                               struct device_attribute *attr,
+                               char *buf)
+{
+       struct asus_wmi *asus = dev_get_drvdata(dev);
+
+       return sprintf(buf, "%d\n", asus->gpu_fan_pwm_mode);

SHould be sysfs_emit(). If there are other uses of sprintf() or similar in the cases when it goes to sysfs, you may add another patch to fix them all.

Quoted 1 line

+}

Signature · 2 lines
With Best Regards,
Andy Shevchenko