Skip to contentSkip to conversation

ASoC: rt5640: Fix the JD voltage dropping issue

PATCH In review Oder Chiou 2 participants 2 messages Aug 8, 2022 – Aug 9, 2022

Subsystems (3)
lore
Share & tools
lore

Oder Chiou

author maintainer
#0 lore raw

PATCH 1/1 ASoC: rt5640: Fix the JD voltage dropping issue

The patch fixes the JD voltage dropping issue in the HDA JD using.

---
 sound/soc/codecs/rt5640.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/soc/codecs/rt5640.c +3 -2
index 38ab8d4291c..5a844329800 100644
@@ -1986,7 +1986,7 @@ static int rt5640_set_bias_level(struct snd_soc_component *component,
 		snd_soc_component_write(component, RT5640_PWR_MIXER, 0x0000);
 		if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER)
 			snd_soc_component_write(component, RT5640_PWR_ANLG1,
-				0x0018);
+				0x2818);
 		else
 			snd_soc_component_write(component, RT5640_PWR_ANLG1,
 				0x0000);
@@ -2600,7 +2600,8 @@ static void rt5640_enable_hda_jack_detect(
 	snd_soc_component_update_bits(component, RT5640_DUMMY1, 0x400, 0x0);
 
 	snd_soc_component_update_bits(component, RT5640_PWR_ANLG1,
-		RT5640_PWR_VREF2, RT5640_PWR_VREF2);
+		RT5640_PWR_VREF2 | RT5640_PWR_MB | RT5640_PWR_BG,
+		RT5640_PWR_VREF2 | RT5640_PWR_MB | RT5640_PWR_BG);
 	usleep_range(10000, 15000);
 	snd_soc_component_update_bits(component, RT5640_PWR_ANLG1,
 		RT5640_PWR_FV2, RT5640_PWR_FV2);
Signature · 1 line
2.34.1
maintainer
#1 lore raw
Quoted 3 lines · Oder Chiou

The patch fixes the JD voltage dropping issue in the HDA JD using.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: rt5640: Fix the JD voltage dropping issue

      commit: afb176d45870048eea540991b082208270824037

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark