Skip to contentSkip to conversation

ALSA: scarlett2: Add Focusrite Clarett+ 8Pre support

PATCH Applied Geoffrey D. Bennett 2 participants 2 messages Aug 9, 2022 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: scarlett2: Add Focusrite Clarett+ 8Pre support

From: Christian Colglazier <[email protected]>

The Focusrite Clarett+ 8Pre uses the same protocol as the Scarlett Gen 2 and Gen 3 product range. This patch adds support for the Clarett+ 8Pre by adding appropriate entries to the scarlett2 driver.

The Clarett+ 2Pre and 4Pre, and the Clarett USB product line presumably use the same protocol as well, so support for them can easily be added if someone can test.

---
 sound/usb/mixer_quirks.c        |  1 +
 sound/usb/mixer_scarlett_gen2.c | 91 ++++++++++++++++++++++++++++++++-
 2 files changed, 90 insertions(+), 2 deletions(-)
sound/usb/mixer_quirks.c +1 -0
index d35cf54cab33..4a6ee50f69c4 100644
@@ -3238,6 +3238,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 	case USB_ID(0x1235, 0x8213): /* Focusrite Scarlett 8i6 3rd Gen */
 	case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */
 	case USB_ID(0x1235, 0x8215): /* Focusrite Scarlett 18i20 3rd Gen */
+	case USB_ID(0x1235, 0x820c): /* Focusrite Clarett+ 8Pre */
 		err = snd_scarlett_gen2_init(mixer);
 		break;
 
sound/usb/mixer_scarlett_gen2.c +89 -2

133 lines not on this page · raw message

Signature · 1 line
2.37.1
Applied
#1 lore raw
Quoted 7 lines · Geoffrey D. Bennett

From: Christian Colglazier <[email protected]>

The Focusrite Clarett+ 8Pre uses the same protocol as the Scarlett Gen 2 and Gen 3 product range. This patch adds support for the Clarett+ 8Pre by adding appropriate entries to the scarlett2 driver.

Quoted 6 lines

The Clarett+ 2Pre and 4Pre, and the Clarett USB product line presumably use the same protocol as well, so support for them can easily be added if someone can test.

Thanks, applied now.

Takashi