Skip to contentSkip to conversation

thermal/of: Fix error code in of_thermal_zone_find()

PATCH Applied Daniel Lezcano 4 participants 10 messages Aug 9, 2022 – Aug 23, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/4 thermal/of: Fix error code in of_thermal_zone_find()

From: Dan Carpenter <[email protected]>

Currently, if we cannot find the correct thermal zone then this error path returns NULL and it would lead to an Oops in the caller. Return ERR_PTR(-EINVAL) instead.

Fixes 3bd52ac87347 ("thermal/of: Rework the thermal device tree initialization")
---
 drivers/thermal/thermal_of.c | 1 +
 1 file changed, 1 insertion(+)
drivers/thermal/thermal_of.c +1 -0
index c2bb5954b21e..368eb58e97cf 100644
@@ -368,6 +368,7 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
 			}
 		}
 	}
+	tz = ERR_PTR(-EINVAL);
 out:
 	of_node_put(np);
 	return tz;
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 2/4 thermal/of: Return -ENODEV instead of -EINVAL if registration fails

The previous version of the OF code was returning -ENODEV if no thermal zones description was found or if the lookup of the sensor in the thermal zones was not found.

The backend drivers are expecting this return value as an information about skipping the sensor initialization and considered as normal.

Fix the return value by replacing -EINVAL by -ENODEV and remove the error message as this missing is not considered as an error.

---
v2:
- Change the error message to a debug message
- Only show an error if the error is not -ENODEV

---
 drivers/thermal/thermal_of.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/thermal/thermal_of.c +5 -4
index 368eb58e97cf..3effc729be4b 100644
@@ -328,8 +328,8 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
 
 	np = of_find_node_by_name(NULL, "thermal-zones");
 	if (!np) {
-		pr_err("Unable to find thermal zones description\n");
-		return ERR_PTR(-EINVAL);
+		pr_debug("No thermal zones description\n");
+		return ERR_PTR(-ENODEV);
 	}
 
 	/*
@@ -368,7 +368,7 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
 			}
 		}
 	}
-	tz = ERR_PTR(-EINVAL);
+	tz = ERR_PTR(-ENODEV);
 out:
 	of_node_put(np);
 	return tz;
@@ -642,7 +642,8 @@ struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor,
 
 	np = of_thermal_zone_find(sensor, id);
 	if (IS_ERR(np)) {
-		pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
+		if (PTR_ERR(np) != -ENODEV)
+			pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
 		return ERR_CAST(np);
 	}
 
Signature · 1 line
2.34.1
Reviewed-by on v2 2/4
#2 lore raw

Re: [PATCH v2 2/4] thermal/of: Return -ENODEV instead of -EINVAL if registration fails

Quoted 4 lines · Daniel Lezcano

The previous version of the OF code was returning -ENODEV if no thermal zones description was found or if the lookup of the sensor in the thermal zones was not found.

Quoted 8 lines

The backend drivers are expecting this return value as an information about skipping the sensor initialization and considered as normal.

Fix the return value by replacing -EINVAL by -ENODEV and remove the error message as this missing is not considered as an error.

Quoted 42 lines

---
v2:
- Change the error message to a debug message
- Only show an error if the error is not -ENODEV

---
  drivers/thermal/thermal_of.c | 9 +++++----
  1 file changed, 5 insertions(+), 4 deletions(-)
drivers/thermal/thermal_of.c +5 -4
index 368eb58e97cf..3effc729be4b 100644
@@ -328,8 +328,8 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
 
  	np = of_find_node_by_name(NULL, "thermal-zones");
  	if (!np) {
-		pr_err("Unable to find thermal zones description\n");
-		return ERR_PTR(-EINVAL);
+		pr_debug("No thermal zones description\n");
+		return ERR_PTR(-ENODEV);
  	}
 
  	/*
@@ -368,7 +368,7 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
  			}
  		}
  	}
-	tz = ERR_PTR(-EINVAL);
+	tz = ERR_PTR(-ENODEV);
  out:
  	of_node_put(np);
  	return tz;
@@ -642,7 +642,8 @@ struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor,
 
  	np = of_thermal_zone_find(sensor, id);
  	if (IS_ERR(np)) {
-		pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
+		if (PTR_ERR(np) != -ENODEV)
+			pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
  		return ERR_CAST(np);
  	}
 
#3 lore raw

[thermal: thermal/next] thermal/of: Return -ENODEV instead of -EINVAL if registration fails

In reply to Daniel Lezcano
The following commit has been merged into the thermal/next branch of thermal:

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     9d6792df07367aab42009d2b24c62c11a5968ee3
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//9d6792df07367aab42009d2b24c62c11a5968ee3
Author:        Daniel Lezcano <[email protected]>
AuthorDate:    Tue, 09 Aug 2022 10:56:27 +02:00
Committer:     Daniel Lezcano <[email protected]>
CommitterDate: Wed, 17 Aug 2022 14:09:37 +02:00

thermal/of: Return -ENODEV instead of -EINVAL if registration fails

The previous version of the OF code was returning -ENODEV if no thermal zones description was found or if the lookup of the sensor in the thermal zones was not found.

The backend drivers are expecting this return value as an information about skipping the sensor initialization and considered as normal.

Fix the return value by replacing -EINVAL by -ENODEV and remove the error message as this missing is not considered as an error.

Fixes 3bd52ac87347 ("thermal/of: Rework the thermal device tree initialization")
---
 drivers/thermal/thermal_of.c |  9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/thermal/thermal_of.c +5 -4
index 15b342f..072e054 100644
@@ -1062,8 +1062,8 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int 
 
 	np = of_find_node_by_name(NULL, "thermal-zones");
 	if (!np) {
-		pr_err("Unable to find thermal zones description\n");
-		return ERR_PTR(-EINVAL);
+		pr_debug("No thermal zones description\n");
+		return ERR_PTR(-ENODEV);
 	}
 
 	/*
@@ -1102,7 +1102,7 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int 
 			}
 		}
 	}
-	tz = ERR_PTR(-EINVAL);
+	tz = ERR_PTR(-ENODEV);
 out:
 	of_node_put(np);
 	return tz;
@@ -1376,7 +1376,8 @@ struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor,
 
 	np = of_thermal_zone_find(sensor, id);
 	if (IS_ERR(np)) {
-		pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
+		if (PTR_ERR(np) != -ENODEV)
+			pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
 		return ERR_CAST(np);
 	}
 
#4 lore raw

PATCH v2 3/4 dt-bindings: thermal: Fix missing required property

In reply to Daniel Lezcano

When the thermal zone description was converted to yaml schema, the required 'trips' property was forgotten.

The initial text bindings was describing:

"
[ ... ]

* Thermal zone nodes

The thermal zone node is the node containing all the required info for describing a thermal zone, including its cooling device bindings. The thermal zone node must contain, apart from its own properties, one sub-node containing trip nodes and one sub-node containing all the zone cooling maps.

Required properties:
- polling-delay: The maximum number of milliseconds to wait between polls
Type: unsigned when checking this thermal zone.
Size: one cell

- polling-delay-passive: The maximum number of milliseconds to wait
Type: unsigned between polls when performing passive cooling.
Size: one cell

- thermal-sensors: A list of thermal sensor phandles and sensor specifier
Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier

- trips: A sub-node which is a container of only trip point nodes
Type: sub-node required to describe the thermal zone.

Optional property:
- cooling-maps: A sub-node which is a container of only cooling device
Type: sub-node map nodes, used to describe the relation between trips
and cooling devices.
[ ... ]

"

Now the schema describes:

"
[ ... ]

required:
- polling-delay
- polling-delay-passive
- thermal-sensors

[ ... ]
"

Add the missing 'trips' property in the required properties.

Fixed: 1202a442a31fd ("dt-bindings: thermal: Add yaml bindings for thermal zones")

---
 Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/thermal/thermal-zones.yaml +1 -0
index 2d34f3ccb257..8d2c6d74b605 100644
@@ -214,6 +214,7 @@ patternProperties:
       - polling-delay
       - polling-delay-passive
       - thermal-sensors
+      - trips
 
     additionalProperties: false
 
Signature · 1 line
2.34.1
maintainer Acked-by on v2 3/4
#5 lore raw

Re: [PATCH v2 3/4] dt-bindings: thermal: Fix missing required property

Quoted 53 lines · Daniel Lezcano

When the thermal zone description was converted to yaml schema, the required 'trips' property was forgotten.

The initial text bindings was describing:

"
[ ... ]

* Thermal zone nodes

The thermal zone node is the node containing all the required info for describing a thermal zone, including its cooling device bindings. The thermal zone node must contain, apart from its own properties, one sub-node containing trip nodes and one sub-node containing all the zone cooling maps.

Required properties:
- polling-delay: The maximum number of milliseconds to wait between polls
Type: unsigned when checking this thermal zone.
Size: one cell

- polling-delay-passive: The maximum number of milliseconds to wait
Type: unsigned between polls when performing passive cooling.
Size: one cell

- thermal-sensors: A list of thermal sensor phandles and sensor specifier
Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier

- trips: A sub-node which is a container of only trip point nodes
Type: sub-node required to describe the thermal zone.

Optional property:
- cooling-maps: A sub-node which is a container of only cooling device
Type: sub-node map nodes, used to describe the relation between trips
and cooling devices.
[ ... ]

"

Now the schema describes:

"
[ ... ]

required:
- polling-delay
- polling-delay-passive
- thermal-sensors

[ ... ]
"

Quoted 8 lines

Add the missing 'trips' property in the required properties.

Fixed: 1202a442a31fd ("dt-bindings: thermal: Add yaml bindings for thermal zones")

---
 Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 1 +
 1 file changed, 1 insertion(+)
#6 lore raw

[thermal: thermal/fixes] dt-bindings: thermal: Fix missing required property

In reply to Daniel Lezcano
The following commit has been merged into the thermal/fixes branch of thermal:

The following commit has been merged into the thermal/fixes branch of thermal:

Commit-ID:     8c596324232d22e19f8df59ba03410b9b5b0f3d7
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//8c596324232d22e19f8df59ba03410b9b5b0f3d7
Author:        Daniel Lezcano <[email protected]>
AuthorDate:    Tue, 09 Aug 2022 10:56:28 +02:00
Committer:     Daniel Lezcano <[email protected]>
CommitterDate: Mon, 15 Aug 2022 20:38:40 +02:00

dt-bindings: thermal: Fix missing required property

When the thermal zone description was converted to yaml schema, the required 'trips' property was forgotten.

The initial text bindings was describing:

"
[ ... ]

* Thermal zone nodes

The thermal zone node is the node containing all the required info for describing a thermal zone, including its cooling device bindings. The thermal zone node must contain, apart from its own properties, one sub-node containing trip nodes and one sub-node containing all the zone cooling maps.

Required properties:
- polling-delay: The maximum number of milliseconds to wait between polls
Type: unsigned when checking this thermal zone.
Size: one cell

- polling-delay-passive: The maximum number of milliseconds to wait
Type: unsigned between polls when performing passive cooling.
Size: one cell

- thermal-sensors: A list of thermal sensor phandles and sensor specifier
Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier

- trips: A sub-node which is a container of only trip point nodes
Type: sub-node required to describe the thermal zone.

Optional property:
- cooling-maps: A sub-node which is a container of only cooling device
Type: sub-node map nodes, used to describe the relation between trips
and cooling devices.
[ ... ]

"

Now the schema describes:

"
[ ... ]

required:
- polling-delay
- polling-delay-passive
- thermal-sensors

[ ... ]
"

Add the missing 'trips' property in the required properties.

Fixed: 1202a442a31fd ("dt-bindings: thermal: Add yaml bindings for thermal zones")

---
 Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/thermal/thermal-zones.yaml +1 -0
index 2d34f3c..8d2c6d7 100644
@@ -214,6 +214,7 @@ patternProperties:
       - polling-delay
       - polling-delay-passive
       - thermal-sensors
+      - trips
 
     additionalProperties: false
 
#7 lore raw

PATCH v2 4/4 thermal/of: Fix free after use in thermal_of_unregister()

In reply to Daniel Lezcano

The thermal zone is freed after being unregistered. The release method devm_thermal_zone_device_register() calls
-> thermal_of_zone_device_unregister()

This one calls thermal_zone_device_unregister() which frees the thermal zone. However, thermal_of_zone_device_unregister() does access this freed pointer to free different resources allocated by the thermal_of framework which is invalid.

It results in a kernel panic:

[    1.915140] thermal_sys: Failed to find thermal zone for tmu id=2
[    1.921279] qoriq_thermal 1f80000.tmu: Failed to register sensors
[    1.927395] qoriq_thermal: probe of 1f80000.tmu failed with error -22
[    1.934189] Unable to handle kernel paging request at virtual address 01adadadadadad88
[    1.942146] Mem abort info:
[    1.944948]   ESR = 0x0000000096000004
[    1.948708]   EC = 0x25: DABT (current EL), IL = 32 bits
[    1.954042]   SET = 0, FnV = 0
[    1.957107]   EA = 0, S1PTW = 0
[    1.960253]   FSC = 0x04: level 0 translation fault
[    1.965147] Data abort info:
[    1.968030]   ISV = 0, ISS = 0x00000004
[    1.971878]   CM = 0, WnR = 0
[    1.974852] [01adadadadadad88] address between user and kernel address ranges
[    1.982016] Internal error: Oops: 96000004 [#1] SMP
[    1.986907] Modules linked in:
[    1.989969] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-next-20220808-00080-g1c46f44502e0 #1697
[    1.999135] Hardware name: Kontron KBox A-230-LS (DT)
[    2.004199] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.011185] pc : kfree+0x5c/0x3c0
[    2.014516] lr : devm_thermal_of_zone_release+0x38/0x60
[    2.019761] sp : ffff80000a22bad0
[    2.023081] x29: ffff80000a22bad0 x28: 0000000000000000 x27: ffff800009960464
[    2.030245] x26: ffff800009a16960 x25: 0000000000000006 x24: ffff800009f09a40
[    2.037407] x23: ffff800009ab9008 x22: ffff800008d0eea8 x21: 01adadadadadad80
[    2.044569] x20: 6b6b6b6b6b6b6b6b x19: ffff00200232b800 x18: 00000000fffffffb
[    2.051731] x17: ffff800008d0eea0 x16: ffff800008d07d44 x15: ffff800008d0d154
[    2.056647] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.058893] x14: ffff800008d0cddc x13: ffff8000088d1c2c x12: ffff8000088d5034
[    2.072597] x11: ffff8000088d46d4 x10: 0000000000000000 x9 : ffff800008d0eea8
[    2.079759] x8 : ffff002000b1a158 x7 : bbbbbbbbbbbbbbbb x6 : ffff80000a0f53b8
[    2.086921] x5 : ffff80000a22b960 x4 : 0000000000000000 x3 : 0000000000000000
[    2.094082] x2 : fffffc0000000000 x1 : ffff002000838040 x0 : 01adb1adadadad80
[    2.101244] Call trace:
[    2.103692]  kfree+0x5c/0x3c0
[    2.106666]  devm_thermal_of_zone_release+0x38/0x60
[    2.111561]  release_nodes+0x64/0xd0
[    2.115146]  devres_release_all+0xbc/0x350
[    2.119253]  device_unbind_cleanup+0x20/0x70
[    2.123536]  really_probe+0x1a0/0x2e4
[    2.127208]  __driver_probe_device+0x80/0xec
[    2.131490]  driver_probe_device+0x44/0x130
[    2.135685]  __driver_attach+0x104/0x1b4
[    2.139619]  bus_for_each_dev+0x7c/0xe0
[    2.143465]  driver_attach+0x30/0x40
[    2.147048]  bus_add_driver+0x160/0x210
[    2.150894]  driver_register+0x84/0x140
[    2.154741]  __platform_driver_register+0x34/0x40
[    2.159461]  qoriq_tmu_init+0x28/0x34
[    2.163133]  do_one_initcall+0x50/0x250
[    2.166979]  kernel_init_freeable+0x278/0x31c
[    2.171349]  kernel_init+0x30/0x140
[    2.174847]  ret_from_fork+0x10/0x20
[    2.178433] Code: b25657e2 d34cfc00 d37ae400 8b020015 (f94006a1)
[    2.184546] ---[ end trace 0000000000000000 ]---

Store the allocated resource pointers before the thermal zone is free and use them to release the resource after unregistering the thermal zone.

---
 drivers/thermal/thermal_of.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/thermal/thermal_of.c +7 -3
index 3effc729be4b..fd2fb84bf246 100644
@@ -596,11 +596,15 @@ static int thermal_of_unbind(struct thermal_zone_device *tz,
  */
 void thermal_of_zone_unregister(struct thermal_zone_device *tz)
 {
+	struct thermal_trip *trips = tz->trips;
+	struct thermal_zone_params *tzp = tz->tzp;
+	struct thermal_zone_device_ops *ops = tz->ops;
+
 	thermal_zone_device_disable(tz);
 	thermal_zone_device_unregister(tz);
-	kfree(tz->trips);
-	kfree(tz->tzp);
-	kfree(tz->ops);
+	kfree(trips);
+	kfree(tzp);
+	kfree(ops);
 }
 EXPORT_SYMBOL_GPL(thermal_of_zone_unregister);
 
Signature · 1 line
2.34.1
Reviewed-by on v2 4/4
#8 lore raw

Re: [PATCH v2 4/4] thermal/of: Fix free after use in thermal_of_unregister()

Quoted 67 lines · Daniel Lezcano

The thermal zone is freed after being unregistered. The release method devm_thermal_zone_device_register() calls
-> thermal_of_zone_device_unregister()

This one calls thermal_zone_device_unregister() which frees the thermal zone. However, thermal_of_zone_device_unregister() does access this freed pointer to free different resources allocated by the thermal_of framework which is invalid.

It results in a kernel panic:

[    1.915140] thermal_sys: Failed to find thermal zone for tmu id=2
[    1.921279] qoriq_thermal 1f80000.tmu: Failed to register sensors
[    1.927395] qoriq_thermal: probe of 1f80000.tmu failed with error -22
[    1.934189] Unable to handle kernel paging request at virtual address 01adadadadadad88
[    1.942146] Mem abort info:
[    1.944948]   ESR = 0x0000000096000004
[    1.948708]   EC = 0x25: DABT (current EL), IL = 32 bits
[    1.954042]   SET = 0, FnV = 0
[    1.957107]   EA = 0, S1PTW = 0
[    1.960253]   FSC = 0x04: level 0 translation fault
[    1.965147] Data abort info:
[    1.968030]   ISV = 0, ISS = 0x00000004
[    1.971878]   CM = 0, WnR = 0
[    1.974852] [01adadadadadad88] address between user and kernel address ranges
[    1.982016] Internal error: Oops: 96000004 [#1] SMP
[    1.986907] Modules linked in:
[    1.989969] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-next-20220808-00080-g1c46f44502e0 #1697
[    1.999135] Hardware name: Kontron KBox A-230-LS (DT)
[    2.004199] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.011185] pc : kfree+0x5c/0x3c0
[    2.014516] lr : devm_thermal_of_zone_release+0x38/0x60
[    2.019761] sp : ffff80000a22bad0
[    2.023081] x29: ffff80000a22bad0 x28: 0000000000000000 x27: ffff800009960464
[    2.030245] x26: ffff800009a16960 x25: 0000000000000006 x24: ffff800009f09a40
[    2.037407] x23: ffff800009ab9008 x22: ffff800008d0eea8 x21: 01adadadadadad80
[    2.044569] x20: 6b6b6b6b6b6b6b6b x19: ffff00200232b800 x18: 00000000fffffffb
[    2.051731] x17: ffff800008d0eea0 x16: ffff800008d07d44 x15: ffff800008d0d154
[    2.056647] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.058893] x14: ffff800008d0cddc x13: ffff8000088d1c2c x12: ffff8000088d5034
[    2.072597] x11: ffff8000088d46d4 x10: 0000000000000000 x9 : ffff800008d0eea8
[    2.079759] x8 : ffff002000b1a158 x7 : bbbbbbbbbbbbbbbb x6 : ffff80000a0f53b8
[    2.086921] x5 : ffff80000a22b960 x4 : 0000000000000000 x3 : 0000000000000000
[    2.094082] x2 : fffffc0000000000 x1 : ffff002000838040 x0 : 01adb1adadadad80
[    2.101244] Call trace:
[    2.103692]  kfree+0x5c/0x3c0
[    2.106666]  devm_thermal_of_zone_release+0x38/0x60
[    2.111561]  release_nodes+0x64/0xd0
[    2.115146]  devres_release_all+0xbc/0x350
[    2.119253]  device_unbind_cleanup+0x20/0x70
[    2.123536]  really_probe+0x1a0/0x2e4
[    2.127208]  __driver_probe_device+0x80/0xec
[    2.131490]  driver_probe_device+0x44/0x130
[    2.135685]  __driver_attach+0x104/0x1b4
[    2.139619]  bus_for_each_dev+0x7c/0xe0
[    2.143465]  driver_attach+0x30/0x40
[    2.147048]  bus_add_driver+0x160/0x210
[    2.150894]  driver_register+0x84/0x140
[    2.154741]  __platform_driver_register+0x34/0x40
[    2.159461]  qoriq_tmu_init+0x28/0x34
[    2.163133]  do_one_initcall+0x50/0x250
[    2.166979]  kernel_init_freeable+0x278/0x31c
[    2.171349]  kernel_init+0x30/0x140
[    2.174847]  ret_from_fork+0x10/0x20
[    2.178433] Code: b25657e2 d34cfc00 d37ae400 8b020015 (f94006a1)
[    2.184546] ---[ end trace 0000000000000000 ]---
Quoted 7 lines

Store the allocated resource pointers before the thermal zone is free and use them to release the resource after unregistering the thermal zone.

Quoted 27 lines
---
  drivers/thermal/thermal_of.c | 10 +++++++---
  1 file changed, 7 insertions(+), 3 deletions(-)
drivers/thermal/thermal_of.c +7 -3
index 3effc729be4b..fd2fb84bf246 100644
@@ -596,11 +596,15 @@ static int thermal_of_unbind(struct thermal_zone_device *tz,
   */
  void thermal_of_zone_unregister(struct thermal_zone_device *tz)
  {
+	struct thermal_trip *trips = tz->trips;
+	struct thermal_zone_params *tzp = tz->tzp;
+	struct thermal_zone_device_ops *ops = tz->ops;
+
  	thermal_zone_device_disable(tz);
  	thermal_zone_device_unregister(tz);
-	kfree(tz->trips);
-	kfree(tz->tzp);
-	kfree(tz->ops);
+	kfree(trips);
+	kfree(tzp);
+	kfree(ops);
  }
  EXPORT_SYMBOL_GPL(thermal_of_zone_unregister);
 
#9 lore raw

[thermal: thermal/next] thermal/of: Fix free after use in thermal_of_unregister()

In reply to Daniel Lezcano
The following commit has been merged into the thermal/next branch of thermal:

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     8fb5b71ed37dbe469eaa930e2ddc93ec9e305f3c
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//8fb5b71ed37dbe469eaa930e2ddc93ec9e305f3c
Author:        Daniel Lezcano <[email protected]>
AuthorDate:    Tue, 09 Aug 2022 10:56:29 +02:00
Committer:     Daniel Lezcano <[email protected]>
CommitterDate: Wed, 17 Aug 2022 14:09:37 +02:00

thermal/of: Fix free after use in thermal_of_unregister()

The thermal zone is freed after being unregistered. The release method devm_thermal_zone_device_register() calls
-> thermal_of_zone_device_unregister()

This one calls thermal_zone_device_unregister() which frees the thermal zone. However, thermal_of_zone_device_unregister() does access this freed pointer to free different resources allocated by the thermal_of framework which is invalid.

It results in a kernel panic:

[    1.915140] thermal_sys: Failed to find thermal zone for tmu id=2
[    1.921279] qoriq_thermal 1f80000.tmu: Failed to register sensors
[    1.927395] qoriq_thermal: probe of 1f80000.tmu failed with error -22
[    1.934189] Unable to handle kernel paging request at virtual address 01adadadadadad88
[    1.942146] Mem abort info:
[    1.944948]   ESR = 0x0000000096000004
[    1.948708]   EC = 0x25: DABT (current EL), IL = 32 bits
[    1.954042]   SET = 0, FnV = 0
[    1.957107]   EA = 0, S1PTW = 0
[    1.960253]   FSC = 0x04: level 0 translation fault
[    1.965147] Data abort info:
[    1.968030]   ISV = 0, ISS = 0x00000004
[    1.971878]   CM = 0, WnR = 0
[    1.974852] [01adadadadadad88] address between user and kernel address ranges
[    1.982016] Internal error: Oops: 96000004 [#1] SMP
[    1.986907] Modules linked in:
[    1.989969] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-next-20220808-00080-g1c46f44502e0 #1697
[    1.999135] Hardware name: Kontron KBox A-230-LS (DT)
[    2.004199] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.011185] pc : kfree+0x5c/0x3c0
[    2.014516] lr : devm_thermal_of_zone_release+0x38/0x60
[    2.019761] sp : ffff80000a22bad0
[    2.023081] x29: ffff80000a22bad0 x28: 0000000000000000 x27: ffff800009960464
[    2.030245] x26: ffff800009a16960 x25: 0000000000000006 x24: ffff800009f09a40
[    2.037407] x23: ffff800009ab9008 x22: ffff800008d0eea8 x21: 01adadadadadad80
[    2.044569] x20: 6b6b6b6b6b6b6b6b x19: ffff00200232b800 x18: 00000000fffffffb
[    2.051731] x17: ffff800008d0eea0 x16: ffff800008d07d44 x15: ffff800008d0d154
[    2.056647] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.058893] x14: ffff800008d0cddc x13: ffff8000088d1c2c x12: ffff8000088d5034
[    2.072597] x11: ffff8000088d46d4 x10: 0000000000000000 x9 : ffff800008d0eea8
[    2.079759] x8 : ffff002000b1a158 x7 : bbbbbbbbbbbbbbbb x6 : ffff80000a0f53b8
[    2.086921] x5 : ffff80000a22b960 x4 : 0000000000000000 x3 : 0000000000000000
[    2.094082] x2 : fffffc0000000000 x1 : ffff002000838040 x0 : 01adb1adadadad80
[    2.101244] Call trace:
[    2.103692]  kfree+0x5c/0x3c0
[    2.106666]  devm_thermal_of_zone_release+0x38/0x60
[    2.111561]  release_nodes+0x64/0xd0
[    2.115146]  devres_release_all+0xbc/0x350
[    2.119253]  device_unbind_cleanup+0x20/0x70
[    2.123536]  really_probe+0x1a0/0x2e4
[    2.127208]  __driver_probe_device+0x80/0xec
[    2.131490]  driver_probe_device+0x44/0x130
[    2.135685]  __driver_attach+0x104/0x1b4
[    2.139619]  bus_for_each_dev+0x7c/0xe0
[    2.143465]  driver_attach+0x30/0x40
[    2.147048]  bus_add_driver+0x160/0x210
[    2.150894]  driver_register+0x84/0x140
[    2.154741]  __platform_driver_register+0x34/0x40
[    2.159461]  qoriq_tmu_init+0x28/0x34
[    2.163133]  do_one_initcall+0x50/0x250
[    2.166979]  kernel_init_freeable+0x278/0x31c
[    2.171349]  kernel_init+0x30/0x140
[    2.174847]  ret_from_fork+0x10/0x20
[    2.178433] Code: b25657e2 d34cfc00 d37ae400 8b020015 (f94006a1)
[    2.184546] ---[ end trace 0000000000000000 ]---

Store the allocated resource pointers before the thermal zone is free and use them to release the resource after unregistering the thermal zone.

Fixes 3bd52ac87347 ("thermal/of: Rework the thermal device tree initialization")
---
 drivers/thermal/thermal_of.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/thermal/thermal_of.c +7 -3
index 072e054..c5cbe25 100644
@@ -1330,11 +1330,15 @@ static int thermal_of_unbind(struct thermal_zone_device *tz,
  */
 void thermal_of_zone_unregister(struct thermal_zone_device *tz)
 {
+	struct thermal_trip *trips = tz->trips;
+	struct thermal_zone_params *tzp = tz->tzp;
+	struct thermal_zone_device_ops *ops = tz->ops;
+
 	thermal_zone_device_disable(tz);
 	thermal_zone_device_unregister(tz);
-	kfree(tz->trips);
-	kfree(tz->tzp);
-	kfree(tz->ops);
+	kfree(trips);
+	kfree(tzp);
+	kfree(ops);
 }
 EXPORT_SYMBOL_GPL(thermal_of_zone_unregister);