Skip to contentSkip to conversation

crypto: ccp: Add a quirk to firmware update

PATCH In review Jarkko Sakkinen 3 participants 3 messages Aug 9, 2022 – Aug 19, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 crypto: ccp: Add a quirk to firmware update

From: Jarkko Sakkinen <[email protected]>

A quirk for fixing the committed TCB version, when upgrading from a firmware version earlier than 1.50. This is a known issue, and the documented workaround is to load the firmware twice.

Currently, this issue requires the following workaround:

sudo modprobe -r kvm_amd
sudo modprobe -r ccp
sudo modprobe ccp
sudo modprobe kvm_amd

Implement this workaround inside kernel by checking whether the API version is less than 1.50, and if so, download the firmware twice. This addresses the TCB version issue.

---
v2:
- Updated the commit message and comments.
https://lore.kernel.org/all/[email protected]/

 drivers/crypto/ccp/sev-dev.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/crypto/ccp/sev-dev.c +14 -2
index 799b476fc3e8..f27f8bc966b1 100644
@@ -742,6 +742,11 @@ static int sev_update_firmware(struct device *dev)
 	struct page *p;
 	u64 data_size;
 
+	if (!sev_version_greater_or_equal(0, 15)) {
+		dev_dbg(dev, "DOWNLOAD_FIRMWARE not supported\n");
+		return -1;
+	}
+
 	if (sev_get_firmware(dev, &firmware) == -ENOENT) {
 		dev_dbg(dev, "No SEV firmware file present\n");
 		return -1;
@@ -774,6 +779,14 @@ static int sev_update_firmware(struct device *dev)
 	data->len = firmware->size;
 
 	ret = sev_do_cmd(SEV_CMD_DOWNLOAD_FIRMWARE, data, &error);
+
+	/*
+	 * A quirk for fixing the committed TCB version, when upgrading from
+	 * earlier firmware version than 1.50.
+	 */
+	if (!ret && !sev_version_greater_or_equal(1, 50))
+		ret = sev_do_cmd(SEV_CMD_DOWNLOAD_FIRMWARE, data, &error);
+
 	if (ret)
 		dev_dbg(dev, "Failed to update SEV firmware: %#x\n", error);
 	else
@@ -1283,8 +1296,7 @@ void sev_pci_init(void)
 	if (sev_get_api_version())
 		goto err;
 
-	if (sev_version_greater_or_equal(0, 15) &&
-	    sev_update_firmware(sev->dev) == 0)
+	if (sev_update_firmware(sev->dev) == 0)
 		sev_get_api_version();
 
 	/* If an init_ex_path is provided rely on INIT_EX for PSP initialization
Signature · 1 line
2.37.1
maintainer Acked-by on v2 1/1
#1 lore raw
Quoted 13 lines · Jarkko Sakkinen

From: Jarkko Sakkinen <[email protected]>

A quirk for fixing the committed TCB version, when upgrading from a firmware version earlier than 1.50. This is a known issue, and the documented workaround is to load the firmware twice.

Currently, this issue requires the following workaround:

sudo modprobe -r kvm_amd
sudo modprobe -r ccp
sudo modprobe ccp
sudo modprobe kvm_amd

Quoted 7 lines

Implement this workaround inside kernel by checking whether the API version is less than 1.50, and if so, download the firmware twice. This addresses the TCB version issue.

maintainer
#2 lore raw
In reply to Jarkko Sakkinen
Quoted 20 lines · Jarkko Sakkinen

From: Jarkko Sakkinen <[email protected]>

A quirk for fixing the committed TCB version, when upgrading from a firmware version earlier than 1.50. This is a known issue, and the documented workaround is to load the firmware twice.

Currently, this issue requires the following workaround:

sudo modprobe -r kvm_amd
sudo modprobe -r ccp
sudo modprobe ccp
sudo modprobe kvm_amd

Implement this workaround inside kernel by checking whether the API version is less than 1.50, and if so, download the firmware twice. This addresses the TCB version issue.

Quoted 6 lines

---
v2:
- Updated the commit message and comments.
https://lore.kernel.org/all/[email protected]/

 drivers/crypto/ccp/sev-dev.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

Patch applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt