Skip to contentSkip to conversation

Remove outdated information from ChangeLog, point at release branches.

PATCH In review Gert Doering 2 participants 3 messages Aug 10, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Remove outdated information from ChangeLog, point at release branches.

ChangeLog is not maintained in "master", document as such.

---
 ChangeLog | 5028 +----------------------------------------------------
 1 file changed, 4 insertions(+), 5024 deletions(-)
ChangeLog +4 -5024
index 1c69984f..2685d330 100644
@@ -1,5027 +1,7 @@
-OpenVPN Change Log
+OpenVPN ChangeLog
 Copyright (C) 2002-2022 OpenVPN Inc <[email protected]...>
 
-2016.12.16 -- Version 2.4_rc2
-David Sommerseth (9):
-      Fix wrong configure.ac parsing of --enable-async-push
-      Changes: Further improve systemd unit file updates
-      systemd: Intermediate --chroot fix with the new sd_notify() implementation
-      Further enhance async-push feature description
-      Changes.rst: Mainatiner update on C99
-      dev-tools: Add reformat-all.sh for code style unification
-      The Great Reformatting - first phase
-      Merge 'reformatting' branch into master
-      auth-gen-token: Hardening memory cleanup on auth-token failuers
+This file is not maintained in this branch of the OpenVPN git repository.
 
-Gert Doering (1):
-      Refactor setting close-on-exec for socket FDs
-
-Lev Stipakov (2):
-      Arm inotify only in server mode
-      Add "async push" feature to Changes.rst
-
-Magnus Kroken (1):
-      mbedtls: include correct net/net_sockets header according to version
-
-Selva Nair (2):
-      Correctly state the default dhcp server address in man page
-      Unhide a line in man page by fixing a typo
-
-Steffan Karger (4):
-      Fix (and cleanup) crypto flags in combination with NCP
-      Deprecate --no-iv
-      man: mention that --ecdh-curve does not work on mbed TLS builds
-      Don't reopen tun if cipher changes
-
-
-2016.12.01 -- Version 2.4_rc1
-Antonio Quartulli (1):
-      reload CRL only if file was modified
-
-Christian Hesse (3):
-      update year in copyright message
-      Use systemd service manager notification
-      Refuse to daemonize when running from systemd
-
-Gert Doering (1):
-      Fix windows path in Changes.rst
-
-Samuli Seppänen (1):
-      Mention that OpenVPN 2.4 requires Windows Vista or higher
-
-Selva Nair (4):
-      Map restart signals from event loop to SIGTERM during exit-notification wait
-      When parsing '--setenv opt xx ..' make sure a third parameter is present
-      Force 'def1' method when --redirect-gateway is done through service
-      Do not restart dns client service as a part of --register-dns processing
-
-Steffan Karger (4):
-      tls_process: don't set variable that's never read
-      Unconditionally enable TLS_AGGREGATE_ACK
-      Clean up format_hex_ex()
-      Introduce and use secure_memzero() to erase secrets
-
-
-2016.11.24 -- Version 2.4_beta2
-Arne Schwabe (5):
-      Document that tls-crypt also supports inline
-      Fix warning that RAND_bytes is undeclared
-      Remove compat-stdbool.h.
-      Fix various compiler warnings
-      Handle DNS6 option on Android
-
-David Sommerseth (2):
-      Changes.rst: Fixing wrong formatting
-      Document the --auth-token option
-
-Gert Doering (2):
-      Remove remaining traces of compat-stdbool.h
-      Stub implementation of "--dhcp-option DNS6 <v6addr>"
-
-Selva Nair (3):
-      Do not set ipv6 address if '--ip-win32 manual' is used
-      Handle --dhcp-option DNS6 on Windows using netsh
-      Set IPv6 DNS servers using interactive service
-
-Steffan Karger (6):
-      multi_process_float: revert part of c14c4a9e
-      --tls-crypt fixes
-      Change cmocka remote to use https in stead of git protocol
-      generate_key_expansion: make assumption explicit, use C99 features
-      Poor man's NCP for non-NCP peers
-      Refactor data channel key generation API
-
-
-2016.11.17 -- Version 2.4_beta1
-Arne Schwabe (1):
-      Make Changes.rst nicer for 2.4 release
-
-David Sommerseth (16):
-      Update .mailmap to unify and clean up odd names and e-mail addresses
-      cleanup: Remove NOP code sections in ssl.c:tls_process()
-      Remove last rest of INSTALL-win32.txt references
-      auth-gen-token: Add --auth-gen-token option
-      auth-gen-token: Generate an auth-token per client
-      auth-gen-token: Push generated auth-tokens to the client
-      auth-gen-token: Authenticate generated auth-tokens when client re-authenticates
-      Fix builds with --disable-crypto
-      man: Improve the --keepalive section
-      console: Fix compiler warning
-      systemd: Improve the systemd unit files
-      tun: Fix compiler warnings
-      file checks: Merge warn_if_group_others_accessible() into check_file_access()
-      tun: Fix weird commit error causing a double assignment
-      options: Remove --tls-remote
-      Remove unused variable in argv_printf_arglist()
-
-Gert Doering (10):
-      openvpn version line: remove [IPv6], add [AEAD] if available
-      clean up *sig_info handling in link_socket_init_phase2()
-      check c->c2.link_socket before calling do_init_route_ipv6_list()
-      Check previously-unchecked buf_alloc_write() call in crypto self-test.
-      Fix potential division by zero in shaper_reset()
-      Repair topology subnet on FreeBSD 11
-      Repair topology subnet on OpenBSD
-      Add in_port_t check to configure.ac
-      Fix compilation on MinGW with -std=c99
-      Replace WIN32 by _WIN32
-
-Heiko Hund (4):
-      put argv_* functions into own file, add unit tests
-      Remove unused and unecessary argv interfaces
-      remove unused system_str from struct argv
-      Factor out %sc handling from argv_printf()
-
-Lev Stipakov (1):
-      Drop recursively routed packets
-
-Samuli Seppänen (6):
-      Remove INSTALL-win32.txt that is now hosted in openvpn-build
-      Fix update_t_client_ips.sh for out of tree builds
-      Make sure that all relevant files under test go to release tarballs
-      Allow passing extra arguments to fping/fping6 in t_client.rc
-      Prevent generation of duplicate EXPECT_IFCONFIG entries
-      Fix a logic problem in handling of --up scripts in t_client.sh
-
-Selva Nair (2):
-      Support --block-outside-dns on multiple tunnels
-      Unbreak windows build
-
-Steffan Karger (19):
-      Fix use-after-free bug in prepare_push_reply()
-      Remove verbose msg() from send_push_reply()
-      Limit --reneg-bytes to 64MB when using small block ciphers
-      Add a revoked cert to the sample keys
-      Fix --tls-version-max in mbed TLS builds
-      Don't deference type-punned pointers
-      Fix builds on compilers without anonymous union support
-      Refactor static/tls-auth key loading
-      Add missing includes in error.h
-      Make argv unit tests obey {MBEDTLS, OPENSSL}_{LIBS, CFLAGS}
-      Move private file access checks to options_postprocess_filechecks()
-      Deprecate key-method 1
-      Refactor CRL handling
-      Remove unneeded check for extra_certs_file_inline
-      Fix missing return value checks in multi_process_float()
-      Restore pre-NCP cipher options on SIGUSR1
-      Remove unused variables from do_init_crypto_static()
-      Add control channel encryption (--tls-crypt)
-      Add --tls-crypt unit tests
-
-
-2016.10.19 -- Version 2.4_alpha2
-
-David Sommerseth (1):
-      Update .mailmap to unify and clean up odd names and e-mail addresses
-
-Steffan Karger (1):
-      Fix use-after-free bug in prepare_push_reply()
-
-
-2016.10.17 -- Version 2.4_alpha1
-
-Adriaan de Jong (2):
-      Fixed a bug where PolarSSL gave an error when using an inline file tag.
-      Fix --show-pkcs11-ids (Bug #239)
-
-Alexander Pyhalov (1):
-      Default gateway can't be determined on illumos/Solaris platforms
-
-Alon Bar-Lev (1):
-      pkcs11: use generic evp key instead of rsa
-
-Andris Kalnozols (3):
-      Fix some typos in the man page.
-      Do not upcase x509-username-field for mixed-case arguments.
-      extract_x509_extension(): hide status message during normal operation.
-
-Arne Schwabe (100):
-      Document man agent-external-key
-      Options parsing demands unnecessary configuration if PKCS11 is used
-      Error message if max-routes used incorrectly
-      Properly require --key even if defined(MANAGMENT_EXTERNAL_KEY)
-      Remove dnsflags_to_socktype, it is not used anywhere
-      Fix the proto is used inconsistently warning
-      Remove dead code path and putenv functionality
-      Remove unused function xor
-      Move static prototype definition from header into c file
-      Remove unused function no_tap_ifconfig
-      Add the client id (CID) to the output of the status command
-      Print client id only if compiled with man agent support. Otherwise print an empty string.
-      Allow routes to be set before opening tun, similar to ifconfig before opening tun
-      Add ability to send/receive file descriptors via management interface
-      Android platform specific changes.
-      Emulate persist-tun on Android
-      Document the Android implementation in OpenVPN
-      Only print script warnings when a script is used. Remove stray mention of script-security system.
-      Fix #ifdefs for P2MP_SERVER
-      Move settings of user script into set_user_script function
-      Move checking of script file access into set_user_script
-      Fix another #ifdef/#if P2MP_SERVER
-      PATCHv3 Remove unused variables or put them to the defines they are being used in
-      Add support of utun devices under Mac OS X
-      Add support to ignore specific options.
-      Add a note what setenv opt does for OpenVPN < 2.3.3
-      Implement custom HTTP header for http-proxy, and always send user-agent:
-      Add reporting of UI version to basic push-peer-info set.
-      Change the type of all ports in openvpn to const char* and let getaddrinfo resolve the port together with the hostname.
-      Fix compile error in ssl_openssl introduced by polar external-management patch
-      Simplify print_sockaddr_ex function, merge duplicate ipv4/ipv6 logic.
-      Split the PROTO_UDP_xx options into AF_INET/AF_INET6 and PROTO_TCP/PROTO_UDP part.
-      Fix two instances of asserting AF_INET
-      Fix assertion when SIGUSR1 is received while getaddrinfo is successful
-      Split link_socket_init_phase1 and link_socket_init_phase2 into smaller more managable/readable functions. No functional changes
-      Change proto_remote() function to return a constant string
-      Remove the ip-remote-hint option.
-      change the type of 'remote' to addrinfo*, and rename to 'remote_list'.
-      When resolving fails print the error message from socket layer
-      Implement dual stack client support for OpenVPN
-      Move ASSERT so external-key with OpenSSL works again
-      Implement listing on IPv4/IPv6 dual socket on all platform
-      Add warning for using connection block variables after connection blocks
-      Update IPv6 related readme files
-      Introduce safety check for http proxy options
-      Fix warning for max-routes: do not quit when parsing an old configuration. Format the message to be more like the other deprecated options
-      Fix connecting to localhost on Android
-      Move the initialization of the environment to the top so c2.es is initialized
-      Workaround broken Android 4.4 VpnService API for persist-tun mode
-      Implement an easy parsable log output that allows access to flags of the log message
-      Introduce an option to resolve dns names in advance for --remote, --local and --http-proxy
-      Fix for server selecting address family
-      Don't show the connection profile store in options->ce if there is a connection_list defined.
-      Add gateway and device to android control messages
-      Clean up of socket code.
-      Fix assert when using port-share
-      Work around Solaris getaddrinfo() returing ai_protocol=0
-      Fix man page and OSCP script: tls_serial_{n} is decimal
-      Remove ENABLE_BUFFER_LIST
-      Fix server routes not working in topology subnet with --server [v3]
-      Always enable http-proxy and socks-proxy
-      Remove deprecated --max-routes option from manual
-      Add documentation for PERSIST_TUN_ACTION (Android specific)
-      Remove possibility of using --tls-auth with non OpenVPN Static key files
-      Remove unused function sock_addr_set
-      Document the default for tls-cipher.
-      Report missing end-tags of inline files as errors
-      Fix commit e473b7c if an inline file happens to have a line break exactly at buffer limit
-      Show extra-certs in current parameters, fix clang warning and logic error in preresolve
-      Remove unused function h_errno_msg
-      Add support for requesting the fd again to rebind to the next interface.
-      Don't redirect the gateway on Android even if requested
-      Fix loglevel of protect socket message
-      Extend network-change command to allow reprotecting on the same network (for short connection losses)
-      Use pseudo gw as default gw on Android as a workaround for not being able to read /proc/net/route
-      Remove #ifdefs for client nat support.
-      Do not install a host route for the VPN on Android
-      Fix commit c67acea173dc9ee37220f5b9ff14ede081181992
-      Do not set the buffer size by default but rely on the operation system default.
-      Start Changes.rst that lists changes in 2.4.0
-      Remove --enable-password-save option
-      Reflect enable-password-save change in documentation
-      Also remove second instance of enable-password-save in the man page
-      Detect config lines that are too long and give a warning/error
-      Implement the compression V2 data format for stub and lz4.
-      Fix assert when comp is called with unknown algorithm, always call comp init method
-      Ignore stamp-h2 we generate during build process
-      Implement inlining of crl files
-      Complete push-peer-info documentation and allow IV_PLAT_VER for other platforms than Windows if the client UI supplies it.
-      Remove http-proxy-timeout, socks timeout and set default of server-poll-timeout to 120s
-      Add documentation for http-proxy-user-pass option
-      Remove http-proxy-retry and socks-proxy-retry.
-      Update android documentation to match source code
-      Use AES ciphers in our sample configuration files and add a few modern 2.4 examples
-      Fix ENABLE_CRYPTO_OPENSSL set to YES even with --disable-crypto set
-      Prefer RECVDSTADDR to PKTINFO for IPv4 in OS X since it actually works (unlike PKTINFO)
-      Incorporate the Debian typo fixes where appropriate and make show_opt default message clearer
-      Enable TCP non-linear packet ID
-      Change the hold command to communicate the time that OpenVPN would wait to the UI.
-      Remove tun-ipv6 Option. Instead assume that IPv6 is always supported.
-
-Boris Lytochkin (1):
-      Log serial number of revoked certificate
-
-Christian Hesse (1):
-      fix build with automake 1.13(.1)
-
-Christian Niessner (1):
-      Fix corner case in NTLM authentication (trac #172)
-
-Christos Trochalakis (1):
-      Adjust server-ipv6 documentation
-
-Cristian Rodriguez (1):
-      Use SSL_MODE_RELEASE_BUFFERS if available
-
-Daniel Hahler (1):
-      options: fix option check for "plugin"
-
-Daniel Kubec (4):
-      Added support for TLS Keying Material Exporters [RFC-5705]
-      Added document for TLS Keying Material Exporters [RFC-5705]
-      sample-plugin: TLS Keying Material Exporter [RFC-5705] demonstration plug-in
-      Fix buffer size parameter for exported keying material.
-
-David Sommerseth (44):
-      Make git ignore some more files
-      Remove the support for using system() when executing external programs or scripts
-      Fix double-free issue in pf_destroy_context()
-      Reset the version.m4 version for the master branch
-      Avoid recursion in virtual_output_callback_func()
-      The get_default_gateway() function uses warn() instead of msg()
-      Improve the git revision tracking
-      man page: Update man page about the tls_digest_{n} environment variable
-      Remove the --disable-eurephia configure option
-      plugin: Extend the plug-in v3 API to identify the SSL implementation used
-      autoconf: Fix typo
-      t_client.sh: Check for fping/fping6 availability
-      t_client.sh: Write errors to stderr and document requirements
-      t_client.sh: Add prepare/cleanup possibilties for each test case
-      Fix file checks when --chroot is being used
-      Adjusted autotools files to build more cleanly on newer autoconf/automake versions
-      Improve error reporting on file access to --client-config-dir and --ccd-exclusive
-      Don't let openvpn_popen() keep zombies around
-      Don't try to use systemd-ask-password if it is not available
-      Clean up the pipe closing in openvpn_popen()
-      Add systemd unit file for OpenVPN
-      systemd: Use systemd functions to consider systemd availability
-      systemd: Reworked the systemd unit file to handle server and client configs better
-      autotools: Fix wrong ./configure help screen default values
-      down-root plugin: Replaced system() calls with execve()
-      down-root: Improve error messages
-      plugin, down-root: Fix compiler warnings
-      sockets: Remove the limitation of --tcp-nodelay to be server-only
-      plugins, down-root: Code style clean-up
-      Provide compile time OpenVPN version information to plug-ins
-      Provide OpenVPN runtime version information to plug-ins
-      Avoid partial authentication state when using --disabled in CCD configs
-      Only build and run cmocka unit tests if its submodule is initialized
-      Another fix related to unit test framework
-      Remove NOP function and callers
-      Revert "Drop recursively routed packets"
-      Fix client connection instant timeout
-      t_client.sh: Make OpenVPN write PID file to avoid various sudo issues
-      t_client.sh: Add support for Kerberos/ksu
-      t_client.sh: Improve detection if the OpenVPN process did start during tests
-      Rework the user input interface to make it more modular
-      Re-implement the systemd support using the new query user API
-      systemd: Do not mask usernames when querying for it via systemd-ask-password
-      Move memcmp_constant_time() to crypto.h
-
-David Woodhouse (2):
-      pkcs11: Load p11-kit-proxy.so module by default
-      Make 'provider' option to --show-pkcs11-ids optional where p11-kit is present
-
-Davide Brini (2):
-      Provide more accurate warning message
-      Document authfile for socks server
-
-Dmitrij Tejblum (1):
-      Fix is_ipv6 in case of tap interface.
-
-Dorian Harmans (1):
-      Add CHACHA20-POLY1305 ciphersuite IANA name translations.
-
-Felix Janda (1):
-      Use OPENVPN_ETH_P_* so that <netinet/if_ether.h> is unecessary
-
-Fish (1):
-      Add lz4 support to MSVC.
-
-Gert Doering (110):
-      Implement --mssfix handling for IPv6 packets.
-      Fix option inconsistency warnings about "proto" and "tun-ipv6"
-      Fix parameter type for IP_TOS setsockopt on non-Linux systems.
-      Fix client crash on double PUSH_REPLY.
-      Update README.IPv6 to match what is in 2.3.0
-      Repair "tcp server queue overflow" brokenness, more <stdbool.h> fallout.
-      Permit pool size of /64.../112 for ifconfig-ipv6-pool
-      Add MIN() compatibility macro
-      Fix directly connected routes for "topology subnet" on Solaris.
-      Print "Virtual IPv6 Address" on management interface queries [v4]
-      Use constrain_int() instead of MIN()+syshead.c compat definition - v2.
-      Fix NULL-pointer crash in route_list_add_vpn_gateway().
-      Fix usage of 'compression ...' from global config.
-      Make push-peer-info visible in "normal" per-instance environment.
-      Fix problem with UDP tunneling due to mishandled pktinfo structures.
-      Improve documentation and help text for --route-ipv6.
-      Fix argument type warning introduced by http extra proxy header patch.
-      Fix IPv6 examples in t_client.rc-sample
-      Fix slow memory drain on each client renegotiation.
-      t_client.sh: ignore fields from "ip -6 route show" output that distort results.
-      Fix IPv6_V6ONLY logic.
-      Implement LZ4 compression.
-      Provide LZ4 sources in src/compat/ and use if no system lz4 library found.
-      Document "lz4" argument to "compress" config option.
-      Make code and documentation for --remote-random-hostname consistent.
-      Reduce IV_OPENVPN_GUI_VERSION= to IV_GUI_VER=
-      remove some 'unused variable' warnings
-      Cleanup ir6->netbits handling.
-      Document issue with --chroot, /dev/urandom and PolarSSL.
-      Rename 'struct route' to 'struct route_ipv4'
-      Replace copied structure elements with including <net/route.h>
-      Add "test-driver" and "compile" to .gitignore
-      Fix crash when using --inetd.
-      IPv6 address/route delete fix for Win8
-      Add SSL library version reporting.
-      Minor t_client.sh cleanups
-      Repair --multihome on FreeBSD for IPv4 sockets.
-      Rewrite manpage section about --multihome
-      More IPv6-related updates to the openvpn man page.
-      Conditionalize calls to print_default_gateway on !ENABLE_SMALL
-      Merge get_default_gateway() implementation for all 4+1 BSD variants.
-      Drop incoming fe80:: packets silently now.
-      Recognize AIX, define TARGET_AIX
-      Add tap driver initialization and ifconfig for AIX.
-      implement adding/deleting routes on AIX, for IPv4 and IPv6
-      Make t_client.sh work on AIX.
-      Fix t_lpback.sh platform-dependent failures
-      Call init script helpers with explicit path (./)
-      Fix windows build on older mingw versions.
-      New approach to handle peer-id related changes to link-mtu.
-      Print remote IPv4 address on a dual-stack v6 socket in IPv4 format
-      Fix incorrect use of get_ipv6_addr() for iroute options.
-      Remove count_netmask_bits(), convert users to use netmask_to_netbits2()
-      Fix leftover 'if (false) ;' statements
-      Print helpful error message on --mktun/--rmtun if not available.
-      explain effect of --topology subnet on --ifconfig
-      Add note about file permissions and --crl-verify to manpage.
-      repair --dev null breakage caused by db950be85d37
-      assume res_init() is always there.
-      Correct note about DNS randomization in openvpn.8
-      Disallow usage of --server-poll-timeout in --secret key mode.
-      slightly enhance documentation about --cipher
-      Enforce "serial-tests" behaviour for tests/Makefile
-      Revert "Enforce "serial-tests" behaviour for tests/Makefile"
-      On signal reception, return EAI_SYSTEM from openvpn_getaddrinfo().
-      Use configure.ac hack to apply serial_test AM option only if supported.
-      Use EAI_AGAIN instead of EAI_SYSTEM for openvpn_getaddrinfo().
-      Move res_init() call to inner openvpn_getaddrinfo() loop
-      Fix FreeBSD ifconfig for topology subnet tunnels.
-      Produce a meaningful error message if --daemon gets in the way of asking for passwords.
-      Document --daemon changes and consequences (--askpass, --auth-nocache).
-      Fix build on OpenSolaris (non-gmake)
-      Un-break --auth-user-pass on windows
-      refactor struct route_ipv6, bring in line with struct route_ipv4 again
-      refactor struct route_ipv6_list, bring in line with struct route_list again
-      Add route_ipv6_gateway* data structures for rgi6 support.
-      Create basic infrastructure for IPv6 default gateway handling / redirection.
-      Make client delay less before sending PUSH_REQUEST
-      get_default_gateway_ipv6(): Linux / Netlink implementation.
-      Implement handling of overlapping IPv6 routes with IPv6 remote VPN server address
-      Implement '--redirect-gateway ipv6'
-      get_default_gateway_ipv6(): *BSD / MacOS / Solaris PF_ROUTE implementation
-      Fix IPv6 host routes to LAN gateway on OpenSolaris
-      Replace unaligned 16bit access to TCP MSS value with bytewise access
-      Repair test_local_addr() on WIN32
-      Add custom check for inet_pton()/inet_ntop() on MinGW/WIN32
-      get_default_gateway_ipv6(): Win32 implementation using GetBestRoute2()
-      Remove support for snappy compression.
-      Fix info.af == AF_UNSPEC case for server with --mtu-disc
-      Fix FreeBSD-specific mishandling of gc arena pointer in create_arbitrary_remote()
-      remove unused gc_arena in FreeBSD close_tun()
-      Un-break compilation on *BSD
-      Fix isatty() check for good.
-      Fix openserv/validate.o linking issues on mingw.
-      Fix library order in -lmbedtls test.
-      Implement push-remove option to selectively remove pushed options.
-      Upgrade bundled compat-lz4 to upstream release r131.
-      Change --enable-pedantic to use -std=c99 and not -ansi (C90).
-      Fix problems with NCP and --inetd.
-      Do not abort t_client run if OpenVPN instance does not start.
-      Fix IP_PKTINFO related compilation failure on NetBSD 7.0
-      Show compile-time variant for --multihome in --version output.
-      Fix win32 building with C99 mode
-      Fix t_client runs on OpenSolaris
-      make t_client robust against sudoers misconfiguration
-      add POSTINIT_CMD_suf to t_client.sh and sample config
-      Fix --multihome for IPv6 on 64bit BSD systems.
-      Enable -D_SVR4_2 for compilation on Solaris
-      Revert "Enable -D_SVR4_2 for compilation on Solaris"
-      Enable -D_XPG4_2 for compilation on Solaris
-
-Guy Yur (1):
-      Fix --redirect-private in --dev tap mode.
-
-Heikki Hannikainen (1):
-      Always load intermediate certificates from a PKCS#12 file
-
-Heiko Hund (20):
-      Fix display of plugin hook types
-      Support UTF-8 --client-config-dir
-      close more file descriptors on exec
-      Ignore UTF-8 byte order mark
-      reintroduce --no-name-remapping option
-      make --tls-remote compatible with pre 2.3 configs
-      add new option for X.509 name verification
-      Support non-ASCII TAP adapter names on Windows
-      Support non-ASCII characters in Windows tmp path
-      make sure sa_family_t is defined
-      convert struct signal_info element
-      grow route lists dynamically
-      fix route struct name
-      refine assertion to allow other modes than CBC
-      Fix compilation on Windows
-      fix warnings on Windows
-      extend management interface command "state"
-      put virtual IPv6 addresses into env
-      interactive service v3
-      Windows: do_ifconfig() after open_tun()
-
-Holger Kummert (1):
-      Del ipv6 addr on close of linux tun interface
-
-Hubert Kario (2):
-      ocsp_check - signature verification and cert staus results are separate
-      ocsp_check - double check if ocsp didn't report any errors in execution
-
-Ilya Shipitsin (3):
-      initial travis-ci support
-      skip t_lpback.sh and t_cltsrv.sh if openvpn configured --disable-crypto
-      enable "--disable-crypto" build configuration for travis
-
-Ivo Manca (1):
-      Plug memory leak in mbedTLS backend
-
-James Bekkema (1):
-      Fix socket-flag/TCP_NODELAY on Mac OS X
-
-James Geboski (1):
-      Fix --askpass not allowing for password input via stdin
-
-James Yonan (14):
-      Added support for the Snappy compression algorithm
-      Always push basic set of peer info values to server.
-      TLS version negotiation
-      Added "setenv opt" directive prefix.  If present, and if the directive that follows is recognized, it will be processed as if the "setenv opt" prefix was absent.  If present and if the directive that follows is not recognized, the directive will be ignored rather than cause a fatal error.
-      MSVC fixes
-      Set SSL_OP_NO_TICKET flag in SSL context for OpenSSL builds, to disable TLS stateless session resumption.
-      Use native strtoull() with MSVC 2013.
-      Define PATH_SEPARATOR for MSVC builds.
-      Fixed some compile issues with show_library_versions()
-      Added flags parameter to format_hex_ex.
-      Extended x509-track for OpenSSL to report SHA1 fingerprint.
-      Fixed port-share bug with DoS potential
-      Added directive to specify HTTP proxy credentials in config.
-      Bind to local socket before dropping privileges
-
-Jan Just Keijser (5):
-      man page patch for missing options
-      make 'explicit-exit-notify' pullable again
-      include ifconfig_ environment variables in --up-restart env set
-      Author: Jan Just Keijser <[email protected]...>
-      Make certificate expiry warning patch (091edd8e299686) work on OpenSSL 1.0.1 and earlier.
-
-Jann Horn (1):
-      Remove quadratic complexity from openvpn_base64_decode()
-
-Jeffrey Cutter (1):
-      Update contrib/pull-resolv-conf/client.up for no DOMAIN
-
-Jens Neuhalfen (6):
-      Make intent of utun device name validation clear
-      Fix buffer overflow by user supplied data
-      ignore the local config file t_client.rc in git
-      Prevent integration test timeout bc. of sudo
-      Add unit testing support via cmocka
-      Add a test for auth-pam searchandreplace
-
-Jens Wagner (1):
-      Fix spurious ignoring of pushed config options (trac#349).
-
-Jesse Glick (1):
-      Allow use of NetBeans without saving nbproject/ directory.
-
-Joachim Schipper (5):
-      doc/management-notes.txt: fix typo
-      Fix typo in ./configure message
-      Refactor tls_ctx_use_external_private_key()
-      --management-external-key for PolarSSL
-      external_pkcs1_sign: Support non-RSA_SIG_RAW hash_ids
-
-Jonathan K. Bullard (3):
-      Fix mismatch of fprintf format specifier and argument type
-      Fix null pointer dereference in options.c
-      Fail if options have extra parameters [v2]
-
-Josh Cepek (7):
-      Fix parameter listing in non-debug builds at verb 4
-      (updated) [PATCH] Warn when using verb levels >=7 without debug
-      Fix proto tcp6 for server & non-P2MP modes
-      Fix Windows script execution when called from script hooks
-      Correct error text when no Windows TAP device is present
-      Require a 1.2.x PolarSSL version
-      Push an IPv6 CIDR mask used by the server, not the pool's size
-
-Julien Muchembled (1):
-      Fix --mtu-disc option with IPv6 transport
-
-Kenneth Rose (1):
-      Fix v3 plugins to support returning values back to OpenVPN.
-
-Klee Dienes (1):
-      tls_ctx_load_ca: Improve certificate error messages
-
-Leon Klingele (1):
-      Add link to bug tracker
-
-Leonardo Basilio (1):
-      Correctly report TCP connection timeout on windows.
-
-Lev Stipakov (26):
-      Peer-id patch v7
-      Add the peer-id to the output of the status command
-      Prevent memory drain for long lasting floating sessions
-      Disallow lameduck's float to an address taken by another client
-      Fix NULL dereferencing
-      Fix mssfix default value in connection_list context
-      This fixes MSVS 2013 compilation.
-      Continuation of MSVS fixes
-      Fast recovery when host is in unreachable network
-      Fix compilation error with --disable-crypto
-      Send push reply right after async auth complete
-      Fix compilation with --disable-server
-      Refine float logging
-      Generate openvpn-plugin.h for MSVC build
-      Replace variable length array with malloc
-      Use adapter index instead of name for windows IPv6 interface config
-      Notify clients about server's exit/restart
-      Use adapter index for add/delete_route_ipv6
-      Pass adapter index to up/down scripts
-      Detecting and logging Windows versions
-      Report Windows bitness
-      Fix "implicit declaration" compiler warning
-      Drop recursively routed packets
-      Support for disabled peer-id
-      Exclude peer-id from pulled options digest
-      Use separate list for per-client push options
-
-Lukasz Kutyla (1):
-      Fix privilege drop if first connection attempt fails
-
-Matthias Andree (1):
-      Enable TCP_NODELAY configuration on FreeBSD.
-
-Max Muster (1):
-      Remove duplicate cipher entries from TLS translation table.
-
-Michael McConville (1):
-      Fix undefined signed shift overflow
-
-Michal Ludvig (1):
-      Support for username-only auth file.
-
-Mike Gilbert (2):
-      Add configure check for the path to systemd-ask-password
-      Include systemd units in the source tarball (make dist)
-
-Niels Ole Salscheider (1):
-      Fix build with libressl
-
-Peter Sagerson (1):
-      Fix configure interaction with static OpenSSL libraries
-
-Philipp Hagemeister (2):
-      Add topology in sample server configuration file
-      Implement on-link route adding for iproute2
-
-Phillip Smith (1):
-      Use bob.example.com and alice.example.com to improve clarity of documentation
-
-Robert Fischer (1):
-      Updated manpage for --rport and --lport
-
-Samuel Thibault (1):
-      Ensure that client-connect files are always deleted
-
-Samuli Seppänen (15):
-      Removed ChangeLog.IPv6
-      Added cross-compilation information INSTALL-win32.txt
-      Updated README
-      Cleaned up and updated INSTALL
-      Fix to --shaper documentation on the man-page
-      Properly escape dashes on the man-page
-      Improve documentation in --script-security section of the man-page
-      Add CONTRIBUTING.rst
-      Update CONTRIBUTING.rst to allow GitHub PRs for code review purposes
-      Clarify the fact that build instructions in README are for release tarballs
-      Mention tap-windows6 in INSTALL file
-      Use an up-to-date easy-rsa URL on the man-page
-      Clarify which Windows versions require which TUN/TAP driver
-      Deprecate the automatic part of openvpnserv.exe in favor of openvpnserv2.exe
-      Automatically cache expected IPs for t_client.sh on the first run
-
-Selva Nair (26):
-      Fix termination when windows suspends/sleeps
-      Do not hard-code windows systemroot in env_block
-      Handle ctrl-C and ctrl-break events on Windows
-      Unbreak read username password from management
-      Restrict options/configs for startup through interactive service
-      Send stdout and stderr of OpenVPN started by interactive service to NUL
-      Handle localized Administrators group name in windows
-      Fix interactive service ignoring stop command if openvpn is running
-      Use appropriate buffer size for WideCharToMultiByte output in interactive.c
-      Refactor and move the block-outside-dns code to a new file (block_dns.[ch])
-      Add support for block-outside-dns through the interactive service
-      Ensure input read using systemd-ask-password is null terminated
-      Support reading the challenge-response from console
-      Make error non-fatal while deleting address using netsh
-      Add support for register-dns through interactive service
-      Fix handling of out of memory error in interactive service
-      Fix the comparison of pull options hash on restart
-      Set WFP engine handle to NULL in win_wfp_uninit()
-      Make block-outside-dns work with persist-tun
-      Add an option to filter options received from server
-      Ignore SIGUSR1/SIGHUP during exit notification
-      Fix management-external-cert option parsing error
-      Return process id of openvpn from interactive service to client
-      Exponentially back off on repeated connect retries
-      Promptly close the netcmd_semaphore handle after use
-      Avoid format specifier %zu for Windows compatibility
-
-Steffan Karger (180):
-      PolarSSL-1.2 support
-      Improve PolarSSL key_state_read_{cipher, plain}text messages
-      Improve verify_callback messages
-      Config compatibility patch. Added translate_cipher_name.
-      Switch to IANA names for TLS ciphers.
-      Fixed autoconf script to properly detect missing pkcs11 with polarssl.
-      Use constant time memcmp when comparing HMACs in openvpn_decrypt.
-      Fixed tls-cipher translation bug in openssl-build
-      Fixed usage of stale define USE_SSL to ENABLE_SSL
-      Do not pass struct tls_session* as void* in key_state_ssl_init().
-      Require polarssl >= 1.2.10 for polarssl-builds, which fixes CVE-2013-5915.
-      Also update TLSv1_method() calls in support code to SSLv23_method() calls.
-      Update TLSv1 error messages to SSLv23 to reflect changes from commit 4b67f98
-      If --tls-cipher is supplied, make --show-tls parse the list.
-      Remove OpenSSL tmp_rsa_callback. Removes support for ephemeral RSA in TLS.
-      Make tls_ctx_restrict_ciphers accept NULL as char *cipher_list.
-      Disable export ciphers by default for OpenSSL builds.
-      Fix compiler warning for unused result of write()
-      Remove unused variables from ssl_verify_polarssl.c's x509_get_serial()
-      Fix compiler warnings in ssl_polarssl.c
-      Bump minimum OpenSSL version to 0.9.8
-      Add openssl-specific common cipher list names to ssl.c.
-      Disable unsupported TLS cipher modes by default, cleans --show-tls output.
-      configure.ac: check for SSL_OP_NO_TICKET flag in OpenSSL
-      configure.ac: use CPPFLAGS for SSL_OP_NO_TICKET check
-      Upgrade to PolarSSL 1.3
-      Improve error reporting during key/cert loading with PolarSSL.
-      Update openvpn-plugin.h for PolarSSL 1.3.
-      Add support for elliptic curve diffie-hellmann key exchange (ECDH)
-      Add an elliptic curve testing cert chain to the sample keys
-      Change signedness of hash in x509_get_sha1_hash(), fixes compiler warning.
-      Fix OCSP_check.sh to also use decimal for stdout verification.
-      Make serial env exporting consistent amongst OpenSSL and PolarSSL builds.
-      Fix build system to accept non-system crypto library locations for plugins.
-      Remove function without effect (cipher_ok() always returned true).
-      Remove unneeded wrapper functions in crypto_openssl.c
-      Remove unneeded defines (were needed for pre-0.9.7 OpenSSL).
-      Fix merge error in a6c573d, the ssl ctx is now abstracted.
-      Use generic openvpn_x509_cert_t in ssl_verify_polarssl.c
-      Fix ssl.c, ssl_verify_* includes
-      Move #include "ssl_verify.h" from ssl.h to the source files that need it.
-      Remove dependency on manage.h from ssl_verify.h
-      Remove unused variable 'proxy' from socket_restart_pause()
-      Add (default disabled) --enable-werror option to configure
-      Fix --disable-ssl builds, were broken by cleanup in 63dc03d.
-      configure.ac: fix SSL_OP_NO_TICKET check
-      Fix bug that incorrectly refuses oid representation eku's in polar builds
-      Update README.polarssl
-      cleanup: remove #if 0'ed function initiate_untrusted_session() from ssl.c.
-      Rename ALLOW_NON_CBC_CIPHERS to ENABLE_OFB_CFB_MODE, and add to configure.
-      Add proper check for crypto modes (CBC or OFB/CFB)
-      Improve --show-ciphers to show if a cipher can be used in static key mode
-      Extend t_lpback tests to test all ciphers reported by --show-ciphers
-      Don't issue warning for 'translate to self' tls-ciphers
-      Don't exit daemon if opening or parsing the CRL fails.
-      Define dummy SSL_OP_NO_TICKET flag if not present in OpenSSL.
-      Fix typo in cipher_kt_mode_{cbc, ofb_cfb}() doxygen.
-      Fix some unintialized variable warnings
-      Fix clang warning in options.c
-      Fix compiler warnings in ssl_polarssl.c.
-      Fix regression with password protected private keys (polarssl)
-      Remove unused variables from ssl_verify_openssl.c extract_x509_extension()
-      Fix assertion error when using --cipher none
-      Add --tls-version-max
-      Modernize sample keys and sample configs
-      Drop too-short control channel packets instead of asserting out.
-      Really fix '--cipher none' regression
-      Update doxygen (a bit)
-      Set tls-version-max to 1.1 if cryptoapicert is used
-      openssl: add crypto_msg(), to easily log openssl errors
-      openssl: add more descriptive message for 'no shared cipher' error
-      Remove ENABLE_SSL define (and --disable-ssl configure option)
-      openssl: use crypto_msg(), get rid of openssl-specific code in error.c
-      Add option to disable Diffie Hellman key exchange by setting '--dh none'
-      Account for peer-id in frame size calculation
-      Disable SSL compression
-      Use tls-auth in sample config files
-      Fix frame size calculation for non-CBC modes.
-      Get rid of old OpenSSL workarounds.
-      polarssl: make sure to always null-terminate the cn
-      Allow for CN/username of 64 characters (fixes off-by-one)
-      Change float log message to include common name, if available.
-      Remove unneeded parameter 'first_time' from possibly_become_daemon()
-      Remove size limit for files inlined in config
-      polarssl: remove code duplication in key_state_write_plaintext{, _const}()
-      Improve --tls-cipher and --show-tls man page description
-      polarssl: disable 1/n-1 record splitting
-      cleanup: remove md5 helper functions
-      Re-read auth-user-pass file on (re)connect if required
-      Clarify --capath option in manpage
-      Call daemon() before initializing crypto library
-      write pid file immediately after daemonizing
-      Increase control channel packet size for faster handshakes
-      Make __func__ work with Visual Studio too
-      fix regression: query password before becoming daemon
-      Fix using management interface to get passwords.
-      reintroduce md5_digest wrapper struct to fix gcc warnings
-      Fix out-of-tree builds; openvpn-plugin.h should be in AC_CONFIG_HEADERS
-      Fix overflow check in openvpn_decrypt()
-      Replace strdup() calls for string_alloc() calls
-      Check return value of ms_error_text()
-      polarssl: add easy logging for PolarSSL errors
-      polarssl: Improve PolarSSL logging
-      openssl: be less verbose about cipher translation errors
-      hardening: add insurance to exit on a failed ASSERT()
-      Fix memory leak in auth-pam plugin
-      openssl: remove usage of OPENSSL_malloc() from show_available_curves
-      polarssl: fix --client-cert-not-required
-      polarssl: add --verify-client-cert optional support
-      Fix (potential) memory leak in init_route_list()
-      Add macro to ensure we exit on fatal errors
-      polarssl: also allocate PKCS#11 certificate object on demand
-      polarssl: don't use deprecated functions anymore
-      polarssl: require >= 1.3.8
-      Fix memory leak in add_option() by simplifying get_ipv6_addr
-      remove nonsense const specifier in nonfatal() return value
-      openssl: properly check return value of RAND_bytes()
-      Fix rand_bytes return value checking
-      Fix openssl builds with custom-built library: specify most-dependent first
-      Support duplicate x509 field values in environment
-      Warn user if their certificate has expired
-      Disable certificate notBefore/notAfter sanity check on OpenSSL < 1.0.2
-      Make assert_failed() print the failed condition
-      cleanup: get rid of httpdigest.c type warnings
-      Fix regression in setups without a client certificate
-      polarssl: actually use polarssl debug logging
-      polarssl: optimize polar_ok() for non-errors
-      Update manpage: OpenSSL might also need /dev/urandom inside chroot
-      polarssl: use wrappers to access md_info_t member functions
-      polarssl: remove now redundant 128-bit blowfish key override
-      socks.c: fix check on get_user_pass() return value(s)
-      configure.ac: simplify crypto library configuration
-      configure.ac: fix polarssl autodetection
-      Allow NULL argument in cipher_ctx_get_cipher_kt()
-      Remove reuse of key_type during init of data channel auth and tls-auth
-      Move crypto_options into key_state and stop using context in SSL-mode.
-      Move key_ctx_bi into crypto_options
-      Move packet_id into crypto_options
-      Change openvpn_encrypt() to append to work buffer only
-      Create separate function for replay check
-      Add AEAD cipher support (GCM)
-      Add cipher name translation for OpenSSL.
-      Add preliminary server-side support for negotiable crypto parameters
-      Minor AEAD patch cleanup
-      Clean up get_tls_handhake_key()
-      Fix OCSP_check.sh
-      Make AEAD modes work with OpenSSL 1.0.1-1.0.1c
-      hardening: add safe FD_SET() wrapper openvpn_fd_set()
-      Only include aead encrypt/decrypt functions if AEAD modes are supported
-      Fix potential null-pointer dereference
-      Fix memory leak in argv_extract_cmd_name()
-      Replace MSG_TEST() macro for static inline msg_test()
-      fixup: change init_key_type() param name in declaration too
-      Further restrict default cipher list
-      PolarSSL x509_get_sha1_hash now returns correct SHA1 fingerprint.
-      Implemented x509-track for PolarSSL.
-      Migrate to mbed TLS 2.x
-      Rename files with 'polarssl' in the name to 'mbedtls'
-      configure.ac: link to all mbed TLS libs during library detection
-      mbedtls: check that private key and certificate match on start
-      mbedtls: improve error reporting in tls verify callback
-      Remove trailing newline from verify callback error messages
-      Don't limit max incoming message size based on c2->frame
-      cleanup: remove alloc_buffers argument from multi_top_init()
-      mbedtls: don't set debug threshold if compiled without MBEDTLS_DEBUG_C
-      Add client-side support for cipher negotiation
-      Add options to restrict cipher negotiation
-      Add server-side support for cipher negotiation
-      Allow ncp-disable and ncp-ciphers to be specified in ccd files
-      Fix '--cipher none --cipher' crash
-      Discourage using 64-bit block ciphers
-      Fix unittests for out-of-source builds
-      Fix --mssfix when using NCP
-      Drop gnu89/c89 support, switch to c99
-      cleanup: remove code duplication in msg_test()
-      Add SHA256 fingerprint support
-      Make sure options->ciphername and options->authname are always defined
-      Update cipher-related man page text
-      Fix duplicate PUSH_REPLY options
-      Check --ncp-ciphers list on startup
-
-TDivine (1):
-      Fix "code=995" bug with windows NDIS6 tap driver.
-
-Tamas TEVESZ (1):
-      Add support for client-cert-not-required for PolarSSL.
-
-Thomas Veerman (2):
-      Fix "." in description of utun.
-      Update expiry date in management event loop
-
-ValdikSS (4):
-      Add Windows DNS Leak fix using WFP ('block-outside-dns')
-      Clarify mssfix documentation
-      Clarify --block-outside-dns documentation
-      Update --block-outside-dns to work on Windows Vista
-
-Vasily Kulikov (1):
-      Mac OS X Keychain management client
-
-Yawning Angel (1):
-      Fix SOCKSv5 method selection
-
-Yegor Yefremov (3):
-      socket: remove duplicate expression
-      polarssl: fix unreachable code
-      cert_data: fix memory leak
-
-janjust (1):
-      Fix "White space before end tags can break the config parser"
-
-kangsterizer (1):
-      Fix typo in sample build script to use LDFLAGS
-
-svimik (1):
-      Fix segfault when enabling pf plug-ins
-
-
-2012.09.12 -- Version 2.3_beta1
-Arne Schwabe (7):
-      Fixes error: --key fails with EXTERNAL_PRIVATE_KEY: No such file or directory if --management-external-key is used
-      Merge almost identical create_socket_tcp and create_socket_tcp6
-      Document the inlining of files in openvpn and document key-direction
-      Merge getaddr_multi and getaddr6 into one function
-      Document --management-client and --management-signal a bit better
-      Document that keep alive will double the second value in server mode and give a short explanation why the value is chosen.
-      Add checks for external-key-managements
-
-David Sommerseth (1):
-      Fix reconnect issues when --push and UDP is used on the server
-
-Gert Doering (4):
-      Reduce --version string detail about IPv6 to just "[IPv6]".
-      Put actual OpenVPN command line on top of corresponding log file.
-      Keep pre-existing tun/tap devices around on *BSD
-      make "ipv6 ifconfig" on linux compatible with busybox ifconfig
-
-Heiko Hund (6):
-      fix regression with --http-proxy[-*] options
-      add x_msg_va() log function
-      add API for plug-ins to write to openvpn log
-      remove stale _openssl_get_subject() prototype
-      remove unused flag SSLF_NO_NAME_REMAPPING
-      Add --compat-names option
-
-2012.07.20 -- Version 2.3_alpha3
-Arne Schwabe (1):
-      Fix compiling with --disable-management
-
-Gert Doering (1):
-      Repair "tap server" mode brokenness caused by <stdbool.h> fallout
-
-Heiko Hund (4):
-      make non-blocking connect work on Windows
-      don't treat socket related errors special anymore
-      remove unused show_connection_list debug function
-      add option --management-query-proxy
-
-2012.06.29 -- Version 2.3_alpha2
-Adriaan de Jong (11):
-      Fixed off-by-one in serial length calculation
-      Migrated x509_get_subject to use of the garbage collector
-      Migrated x509_get_serial to use the garbage collector
-      Migrated x509_get_sha1_hash to use the garbage collector
-      Ensure sys/un.h autoconf detection includes sys/socket.h
-      Added support for new PolarSSL 1.1 RNG
-      Added a configuration option to enable prediction resistance in the PolarSSL random number generator.
-      Use POLARSSL_CFLAGS instead of POLARSSL_CRYPTO_CFLAGS in configure.ac
-      Removed support for PolarSSL < 1.1
-      Updated README.polarssl with build system changes.
-      Removed stray "Fox-IT hardening" string.
-
-Alon Bar-Lev (94):
-      build: version should not contain '-'
-      package: rpm: strip should be handled by package management
-      cleanup: options.c: remove redundant include
-      cleanup: remove C++ warnings
-      cleanup: win32.c: wrong printf format
-      cleanup: remove redundant ';'
-      cleanup: crypto_openssl.c: remove support for pre-openssl-0.9.6
-      cleanup: tun.c: fix incorrect option in message (ip-win32)
-      cleanup: memcmp.c: remove unused source
-      fixup: init.c: add missing conditional for ENABLE_CLIENT_CR
-      build: correct place to alter WINVER is at build system
-      Update .gitignore
-      build: handle printf style format in mingw
-      build: rename plugin directory to plugins
-      build: plugins: properly use CC, CFLAGS and LDFLAGS
-      build: we need the sample.ovpn in future
-      Remove install-win32
-      Remove easy-rsa
-      Remove tap-win32
-      cleanup: rename tap-windows function from win32 to win
-      build: remove windows specific build system
-      build: split acinclude.m4 into m4/*
-      build: m4/ax_varargs.m4: cleanup
-      build: m4/ax_emptyarray.m4: cleanup
-      build: m4/ax_socklen_t.m4: cleanup
-      build: autotools: first pass of trivial autotools changes
-      build: autoconf: remove OPENVPN_ADD_LIBS useless macro
-      build: remove awk and non-standard autoconf output processing
-      build: standard directory layout
-      build: add libtool + windows resources for executables
-      build: autoconf: commands as environment
-      build: libdl usage
-      build: properly detect and use socket libs
-      build: autoconf: minor cleanups
-      build: proper selinux detection and usage
-      build: distribute pkg.m4
-      build: proper pkcs11-helper detection and usage
-      build: properly process lzo-stub
-      build: proper lzo detection and usage
-      build: proper crypto detection and usage
-      build: autoconf: update defaults for options
-      build: win-msvc: msbuild format
-      build: move out config.h include from syshead
-      build: split out compat
-      build: move gettimeofday() emulation to compat
-      build: move daemon() emulation into compat
-      build: move inet_ntop(), inet_pton() emulation into compat
-      cleanup: move console related function into its own module
-      build: move wrappers into platform module
-      build: windows: install version.sh to allow installer read version
-      build: distribute samples in windows
-      build: use tap-windows.h as external dependency
-      build: ax_varargs.m4: fixups
-      build: autoconf: misc sockets fixups
-      build: enable lzo by default
-      build: windows: set vendor to openvpn project + cleanups
-      build: assume dlfcn is available on all supported platforms
-      build: openbsd: detect netinet/ip.h correctly
-      build: tap: search for tap header
-      build: msvc: upgrade to Visual Studio 2010 + fixups
-      Enable pedantic in windows compilation
-      cleanup: flags should not be bool
-      cleanup: avoid using ~0 - generic
-      cleanup: avoid using ~0 - ipv6
-      cleanup: avoid using ~0 - netmask
-      cleanup: avoid using ~0 - windows
-      cleanup: gc usage
-      build: fix some statement left from conversion
-      build: properly detect netinet/ip.h structs
-      build: properly detect TUNSETPERSIST
-      cleanup: plugin: support C++ plugin
-      cleanup: remove C++ comments
-      cleanup: add .gitattributes to control eol style explicitly
-      crash: packet_id_debug_print: sl may be null
-      build: use stdbool.h if available
-      build: fix typo in --enable-save-password
-      build: windows: convert resources to UTF-8
-      build: check minimum polarssl version
-      cleanup: update .gitignore
-      cleanup: spec: make space/tab consistent
-      build: spec: we support openssl >= 0.9.7
-      build: insall README* document using build system
-      build: detect sys/wait.h required for *bsd
-      build: add git revision to --version output if build from git repository
-      build: cleanup: yet another forgotten brackets
-      build: update INSTALL to recent changes
-      build: support platforms that does not need explicit tun headers
-      build: do not support <polarssl-1.1.0
-      build: add --with-special-build to provide special build string
-      cleanup: pkcs11.c: resolve wanings
-      build: integrate plugins build into core build
-      build: plugins: set defaults based on platform
-      cleanup: windows: convert argv (UCS-2 to UTF-8) at earliest
-      build: msvc: chdir with change drive to script location
-
-Arne Schwabe (7):
-      Add the query to the error message.
-      Explain that route-nopull also causes the client to ignore dhcp options.
-      Add the name of the context where option is not allowed to the error message.
-      Only use tmpdir if tmp_dir is really used.
-      Completely remove ancient IANA port warning.
-      Remove ENABLE_INLINE_FILES conditionals
-      Remove ENABLE_CONNECTIONS ifdefs
-
-David Sommerseth (5):
-      Clean-up: Presume that Linux is always IPv6 capable at build time
-      Simplify check_cmd_access() function
-      Change version to indicate the master branch is not a version
-      Some filesystems don't like ':', which is a path 'make dist' would use
-      Remove two unused functions
-
-Frank de Brabander (1):
-      Fix reported compile issues on OSX 10.6.8
-
-Gert Doering (10):
-      repair t_client.sh test after build system revolution
-      t_client.sh iproute2 script fixes
-      t_client.sh - fix for iproute2, print summary line
-      Implement search for "first free" tun/tap device on Solaris
-      cleanup and redefine metric handling for IPv6 routes
-      remove "*option" element in "struct route_ipv6"
-      Remove warning about explicit support for IPv6 support not provided MacOS X
-      Add missing pieces to IPv6 route gateway handling.
-      Update TODO.IPv6 list
-      Remove #include "config.h" from ssl_polarssl.h
-
-Heiko Hund (3):
-      remove wrapper code for Windows CryptoAPI function
-      fix warnings in event.c when building for win32-64
-      remove the --auto-proxy option from openvpn
-
-Igor Novgorodov (1):
-      Remove calls to OpenSSL when building with --disable-ssl
-
-Jonathan K. Bullard (2):
-      Fix file access checks on commands
-      Clarified the docs and help screen about what a 'cmd' is
-
-Samuli Seppänen (1):
-      Added notes about upgrading from 2.3-alpha1 and earlier to INSTALL-win32.txt
-
-2012.02.21 -- Version 2.3-alpha1
-Adriaan de Jong (127):
-      Added Doxygen doxyfile
-      Changed configure to accept --with-ssl-type=openssl
-      Refactored to rand_bytes for OpenSSL-independency
-      Refactored OpenSSL-specific constants
-      Refactored maximum cipher and hmac length constants
-      Refactored show_available_* functions
-      Refactored SSL_clear_error()
-      Refactored crypto initialisation functions
-      Refactored DES key manipulation functions
-      Refactored NTLM DES key generation
-      Refactored message digest type functions
-      Refactored message digest functions
-      Refactored HMAC functions
-      Refactored cipher key types
-      Refactored cipher functions
-      Added PRNG doxygen
-      Refactored: Moved crypto.h inline functions to end of file
-      Removed stale OpenSSL defines from crypto.h
-      Added a check for Openssl or PolarSSL defines
-      Refactored: Added stubs for new files
-      Refactored SSL initialisation functions
-      Refactored TLS_PRF to new hmac and md primitives
-      Refactored tls_show_available_ciphers
-      Refactored get_highest_preference_tls_cipher
-      Refactored root SSL context initialisation
-      Refactored new external key code
-      Refactored DH paramater loading
-      Refactored root TLS option settings
-      Refactored PKCS#12 key loading
-      Refactored PKCS#11 loading
-      Refactored windows cert loading
-      Refactored load certificate functions
-      Refactored private key loading code
-      Refactored external key loading from management
-      Refactored CA and extra certs code
-      Refactored cipher restriction code
-      Refactored tls_options, key_state, and key_source data structures
-      Refactored initalisation of key_states
-      Refactored key_state free code
-      Refactored print_details
-      Refactored key_state read code (including bio_read())
-      Refactored key_state write functions
-      Refactored: Moved BIO debug functions to OpenSSL backend
-      Refactored: removed ks and ks_lame macro for clarity
-      Refactored: moved write_empty_string function back
-      Refactored Doxygen for tls_multi functions
-      Migrated data structures needed by verification functions to ssl_common.h
-      Refactored client_config_dir_exclusive function
-      Refactored certificate hash lock checks
-      Refactored common name locking functions
-      Refactored username and password authentication code
-      Add some extra comments
-      Refactored: split verify_callback into two parts
-      Added function to extract and verify the subject from a certificate
-      Added function to verify and extract the username
-      Refactored: removed global x509_username_field
-      Refactored: separated environment setup during verification
-      Refactored: Netscape certificate type verification
-      Refactored key usage verification code
-      Refactored EKU verification
-      Refactored tls-remote checking
-      Refactored tls-verify-plugin code
-      Refactored tls-verify script code
-      Refactored CRL checks
-      Minor cleanup in verify_cert:
-      Refactored: Moved verify_cert to ssl_verify
-      Cleaned up ssl.h
-      Refactored: made M_SSL dependent on USE_OPENSSL
-      Refactored: renamed X509 functions from verify_*
-      Separated OpenSSL-specific parts of the PKCS#11 driver
-      Modified base64 code in preparation for PolarSSL merge
-      Final cleanup before PolarSSL addition:
-      Refactored X509 track feature to be contained within the openssl backend
-      Added PolarSSL support:
-      Fixed a missing include in ssl_backend.h
-      Fixed a bug in the hash generation in ssl_verify_openssl.c
-      Added SHA_DIGEST_SIZE definition
-      Changed PolarSSL crypto backend to support v0.99-pre5
-      Updated ssl_polarssl.c to work with 0.99-pre5
-      Fixed a compilation warning for size_t key sizes
-      Added a warning that the PolarSSL library does not support pkcs12 files.
-      Added warning that --capath is not available with PolarSSL
-      Disable CryptoAPI when not using OpenSSL, and document that fact.
-      Removed support for management external keys in PolarSSL
-      Removed stray X509_free from ssl.c
-      Refactored (and disabled for PolarSSL) support for writing external cert files in scripts
-      Added an extra define to allow building without PKCS#11
-      Added SSL library to title string
-      Disabled X.509 track and username selection for PolarSSL
-      Hardening: periodically reset the PRNG's nonce value
-      Fixes for the plugin system:
-      Further improvements to plugin support:
-      Fixed an unintentional change in the options calculated key size.
-      Moved print messages back to generic crypto.c from cipher backends
-      Moved HMAC prints back to main crypto module
-      Added back checks for ks->authenticated in verify_user_pass
-      Moved gc_new and gc_free to begin end of function
-      Fixed a bug in the return value of ssl_verify when pre_verify failed
-      Unified verification function return values:
-      Removed a stray Fox-IT tag
-      Fixed a typo: print the subject instead of the serial for verification errors
-      Made SSL_CIPHER const in print_details, to fix warning
-      Moved to PolarSSL 1.0.0:
-      Added missing #ifdef to allow --disable-managent to work again
-      Fixed disabling crypto and SSL
-      Got rid of a few magic numbers in ntlm.c
-      Removed obsolete des_cblock and des_keyschedule
-      Further removal of des_old.h based calls
-      Fixed missing comma in plugin.h
-      Moved prng_uninit out of crypto_uninit_lib
-      Moved CryptoAPI header include to the ssl_openssl.c
-      Reordered functions to ensure warning-free Windows build
-      Added options to switch between OpenSSL and PolarSSL and PKCS11...
-      Moved from strsep to strtok, for Windows compatibility
-      Minor cleanup to enable warning-free Windows build:
-      Fixed a typo when initialising cryptoapi certs
-      Minor code cleanup: cleaned up error handling in verify_cert.
-      Moved out of memory prototype to error.h, as the definition is in error.c
-      Removed support for calling gc_malloc with a NULL gc_arena struct
-
-      (The follwing patches from Adriaan was mistakenly merged with
-       the wrong commit author in the git tree)
-      Doxygen: Added data channel crypto docs
-      Added control channel crypto docs
-      Added compression docs
-      Added reliability layer documentation
-      Added memory management documentation
-      Added data channel fragmentation docs
-      Added main/control docs
-      Moved doxygen-specific files to a separate directory
-
-Byron Ellacott (1):
-      autoconf fixes for building on OSX
-
-David Sommerseth (50):
-      Provide 'dev_type' environment variable to plug-ins and script hooks
-      Define the new openvpn_plugin_{open,func}_v3() API
-      Implement the core v3 plug-in function calls.
-      Extend the v3 plug-in API to send over X509 certificates
-      Added a simple plug-in demonstrating the v3 plug-in API.
-      Separate the general plug-in version constant and v3 plug-in structs version
-      Use a version-less version identifier on the master branch
-      Fix the --client-cert-not-required feature
-      Change the default --tmp-dir path to a more suitable path
-      Improve the mysprintf() issue in openvpnserv.c
-      Add a simple comment regarding openvpn_snprintf() is duplicated
-      Merge branch 'feat_ipv6_transport'
-      Merge branch 'feat_ipv6_payload'
-      Merge branch 'svn-branch-2.1' into merge
-      Solved hidden merge conflicts between master and svn-branch-2.1
-      Fix const declarations in plug-in v3 structs
-      Merge remote-tracking branch 'cron2/feat_ipv6_payload_2.3'
-      Don't define ENABLE_PUSH_PEER_INFO if SSL is not available
-      Fix compiling issues with pkcs11 when --disable-management is configured
-      Remove support for Linux 2.2 configuration fallback
-      Revert "Add new openssl.cnf to easy-rsa/Windows"
-      Merge remote branch SVN 2.1 into the git tree
-      Merge branch 'svn-merger'
-      Fix Microsoft Visual Studio incompatibility in plugin.c
-      Fixed compile issues on FreeBSD and Solaris
-      Fix PolarSSL and --pkcs12 option issues
-      Fix FreeBSD/OpenBSD/NetBSD compiler warnings in get_default_gateway()
-      Make '--win-sys env' default
-      Do some file/directory tests before really starting openvpn
-      Fix bug after removing Linux 2.2 support
-      Don't look for 'stdin' file when using --auth-user-pass
-      Fix compiling with --disable-crypto and/or --disable-ssl
-      Fix a couple of issues in openvpn_execve()
-      Move away from openvpn_basename() over to platform provided basename()
-      Enable access() when building in Visual Studio
-      New Windows build fixes
-      Fix compilation errors on Linux platforms without SO_MARK
-      autotools ./configure don't like compat.h
-      Fix pool logging when IPv6 is not enabled
-      Don't check for file presence on inline files
-      Add --route-pre-down/OPENVPN_PLUGIN_ROUTE_PREDOWN script/plug-in hook
-      Enhance the error handling in _openssl_get_subject()
-      Fix assert() situations where gc_malloc() is called without a gc_arena object
-      Fix compile issues when plug-ins are disabled.
-      Remove --show-gateway if debug info is not enabled (--disable-debug)
-      Fix compile issues with status.c
-      Connection entry {tun,link}_mtu_defined not set correctly
-      Makefile.am referenced a now non-existing config-win32.h
-      Makefile.am was missing ssl_common.h
-      Revamp check_file_access() checks in stdin scenarios
-
-Davide Guerri (1):
-      New feauture: Add --stale-routes-check
-
-Frank de Brabander (1):
-      Fixed wrong return type of cipher_kt_mode
-
-Frederic Crozat (1):
-      Add support to forward console query to systemd
-
-Gert Doering (45):
-      Add more detailed explanation regarding the function of "--rdns-internal"
-      Enable IPv6 Payload in OpenVPN p2mp tun server mode.  20100104-1 release.
-      remove NOTES file from commit - private scribbling
-      NetBSD fixes - on 4.0 and up, use multi-af mode.
-      new feature: "ifconfig-ipv6-push" (from ccd/ config)
-      add some TODOs to TODO.IPv6
-      undo accidential duplication of existing "--iroute" line in the help text
-      basic documentation of IPv6 related options and their syntax
-      Enable IPv6 Payload in OpenVPN p2mp tun server mode.
-      remove NOTES file from commit - private scribbling
-      env_block(): if PATH is not set, add standard PATH setting to env
-      add IPv6 route add / route delete code for windows (using "netsh")
-      - Win32 IPv6 ifconfig support, using "netsh" calls
-      drop "book ipv6" from open_tun() and tuncfg() prototypes
-      document recent changes and open TODOs, adapt --version info, tag release
-      Win32: set next-hop for IPv6 routes according to TUN/TAP mode
-      when deleting a route on win32, also add gateway address
-      WIN32: if IPv6 requested in TUN mode, check if TUN/TAP driver < 9.7
-      revert unconditionally-enabling of setenv_es() logging
-      implement IPv6 ifconfig + route setup/deletion on OpenBSD
-      full "VPN client connect" test framework for OpenVPN t_client.rc-sample
-      renamed t_client.sh to t_client.sh.in
-      2.2-beta3 has a signed TAP driver with the IPv6 code - test for 9.8
-      correct URL for "more information about IPv6 patch is *here*"
-      bugfix for linux/iproute2: IPv6 ifconfig code block was not called for "dev tun"+"topology subnet"
-      bump IPv6 version number (openvpn --version) to 20100922-1
-      Implement "ipv6 ifconfig" for TAP interfaces on Solaris interfaces
-      rebased to 2.2RC2 (beta 2.2 branch)
-      Windows IPv6 cleanup - properly remove IPv6 routes and interface config
-      For all accesses to "struct route_list * rl", check first that rl is non-NULL
-      Replace 32-bit-based add_in6_addr() implementation by an 8-bit based one
-      Platform cleanup for NetBSD
-      Move block for "stale-routes-check" config inside #ifdef P2MP_SERVER block
-      add missing break between "case IPv4" and "case IPv6"
-      bump tap driver version from 9.8 to 9.9
-      log error message and exit for "win32, tun mode, tap driver version 9.8"
-      work around inet_ntop/inet_pton problems for MSVC builds on WinXP
-      Fix build-up of duplicate IPv6 routes on reconnect.
-      Fix list-overrun checks in copy_route_[ipv6_]option_list()
-      add "print test titles" and "use sudo" functionality to t_client.rc
-      Platform cleanup for FreeBSD
-      Implement IPv6 interface config with non-/64 prefix lengths.
-      Fix RUN_SUDO functionality for t_client.sh
-      Document IPv6-related environment variables.
-      Platform cleanup for OpenBSD
-
-Gisle Vanem (1):
-      Avoid re-defining uint32_t when using mingw compiler
-
-Gustavo Zacarias (1):
-      Fix compile issues when using --enable-small and --disable-ssl/--disable-crypto
-
-Heiko Hund (16):
-      add .gitignore to official repository
-      remove function is_proto_tcp()
-      remove legacy code to query IE proxy information
-      lowercase include header name in syshead.h
-      define IN6_ARE_ADDR_EQUAL macro for WIN32
-      add --mark option to set SO_MARK sockopt
-      Windows UTF-8 input/output
-      UTF-8 X.509 distinguished names
-      set Windows environment variables as UCS-2
-      handle Windows unicode paths
-      replace check for TARGET_WIN32 with WIN32
-      do not use mode_t on Windows
-      use the underscore version of stat on Windows
-      make MSVC link against shell32 as well
-      move variable declaration to top of function
-      define access mode flag X_OK as 0 on Windows
-
-Igor Novgorodov (1):
-      The code blocks enabled by ENABLE_CLIENT_CR depends on management
-
-James Yonan (57):
-      Added "management-external-key" option.
-      Minor addition of logging info before and after execution of Windows net commands.
-      Misc fixes to r6708.
-      Added --x509-track option.
-      * added --management-up-down option to allow management interface to be notified of tunnel up/down events.
-      Fixed minor compile issue triggered on builds where MANAGEMENT_DEF_AUTH is not enabled.
-      Implemented get_default_gateway_mac_addr for Mac OS X
-      Fixes to r6925.
-      Properly handle certificate serial numbers > 32 bits.
-      Added "client-nat" option for stateless, one-to-one NAT on the client side.
-      Renamed branch to reflect that it is no longer beta.
-      env_filter_match now includes the serial number of all certs
-      Fixed issue where a client might receive multiple push replies from a server
-      Fixed bug introduced in r7031 that might cause this error message:
-      Extended "client-kill" management interface command (server-side)
-      Client will now try to reconnect if no push reply received within handshake-window seconds.
-      Version 2.1.3n
-      Fixed compiling issues when using --disable-crypto
-      Added "management-external-key" option.
-      Misc fixes to r6708.
-      win/sign.py now accepts an optional tap-dir argument.
-      Added "auth-token" client directive
-      Added ./configure --enable-osxipconfig option for Mac OS X
-      Added more packet ID debug info at debug level 3 for debugging false positive packet replays.
-      Fixed bug that incorrectly placed stricter TCP packet replay rules on UDP sessions
-      Fixed bug in port-share that could cause port share process to crash
-      For Mac OSX, when DARWIN_USE_IPCONFIG is defined, retry ipconfig command on failure
-      Version 2.1.3t
-      Revert r7092 and r7151, i.e. remove --enable-osxipconfig configure option.
-      Added 'dir' flag to "crl-verify" (see man page for info).
-      Added new "extra-certs" and "verify-hash" options
-      Fixed compile issues on Windows.
-      Added --enable-lzo-stub configure option to build an OpenVPN client without LZO
-      Added optional journal directory argument to "port-share" directive
-      Reduce log verbosity at level 3, with a focus on removing excessive log verbosity generated by port-share activity.
-      env_filter_match now includes the serial number of all certs in chain
-      Added support for static challenge/response protocol.
-      r7316 fixes.
-      Added redirect-gateway block-local flag, with support for Linux, Mac OS X
-      Extended x509-track to allow SHA1 certificate hash to be extracted
-      Added "management-query-remote" directive (client) to allow the management interface to override the "remote" directive.
-      Version 2.1.5.
-      Fixed MSVC compile error related to r7408.
-      Redact "echo" directive strings from log, since these strings (going forward) could conceivably contain security-sensitive data.
-      Modified sanitize_control_message to remove redacted data from control string rather than blotting it out with "_" chars.
-      Changed CC_PRINT character class to allow UTF-8 chars.
-      Increased the --verb threshold for "PID_ERR replay" messages to 4 from 3.
-      Fixed issue where redirect-gateway block-local code was not correctly calculating...
-      CC_PRINT character class now allows any 8-bit character value >= 32.
-      "status" management interface command (version >= 2) will now include the username for each connected user.
-      Minor fix to CC_PRINT char class
-      Fixed management interface bug where >FATAL notifications were not being output properly
-      Raised D_PID_DEBUG_LOW from level 3 to 4 to reduce replay error verbosity at level 3.
-      Added "memstats" option to maintain real-time operating stats in a memory-mapped file.
-      Fixed client issues with DHCP Router option extraction/deletion when using layer 2 with DHCP proxy:
-      Allow "tap-win32 dynamic <offset>" to be used in topology subnet mode.
-      Added support for "on-link" routes on Linux client
-
-Jan Just Keijser (1):
-      Made some options connection-entry specific
-
-Joe Patterson (1):
-      common_name passing in auth_pam plugin
-
-JuanJo Ciarlante (40):
-      * rebased openvpn-2.1_rc1b.jjo.20061206.d.patch
-      * created getaddr6(), use it from resolve_remote()
-      * migrated all getaddrinfo() to getaddr6
-      * socket.c: use USE_PF_INET6 in switch constructs to actually toss them out,
-      * support --disable-ipv6 build properly:
-      * important fix for tcp6 reconnection was incorrectly creating a PF_INET socket
-      * added README.ipv6.txt
-      * fixed win32 non-ipv6 build
-      * ipv6 on win32 "milestone": 1st snapshot that passes all unittests
-      * document ipv6 milestone status
-      * doc update w/unittests results
-      * make possible to x-compile openvpn/win32 in Linux
-      * correctly setup hints.ai_socktype for getaddrinfo(), althought sorta hacky, see TODO.ipv6.
-      * renamed README.ipv6{.txt,}
-      * updated {README,TODO}.ipv6 from feedback at openvpn-devel mlist
-      * init.c: document the ENABLE_MANAGEMENT place to work on
-      * init.c: small in-doc tweaks
-      * fix multi-tcp crash (corrected assertion)
-      * TODO.ipv6 update
-      * socket.c: better buf logic in print_sockaddr_ex
-      * fixed segfault for undef address family in print_sockaddr_ex (thanks Marcel!)
-      * doc updates
-      * openbsd: no IFF_MULTICAST, #ifdef around it
-      * no new funcionality, just small cleanups
-      * (prototype) fix for supporting "redirect-gateway" for tunneled ipv4 over ipv6 endpoints
-      * polished redirect-gateway (ipv4 on ipv6 endpoints) support
-      * updated doc
-      * fix --disable-ipv6 build
-      * doc updates
-      * rebased to v2.1.1 release
-      * undo mroute.c changes related to ipv6 payload
-      * fix --multihome for ipv4
-      * fix --multihome for ipv6
-      * ipv6-0.4.14: fix xinetd usage
-      * ipv6-0.4.15: add --multihome support to xBSD
-      * ipv6-0.4.15b: rebase over openvpn-testing-master
-      * ipv6-0.4.16: fix mingw32 build
-      * make ipv6_payload compile under windowze
-      USE_PF_INET6 by default for v2.3
-      fix ipv6 compilation under macosx >= 1070 - v3
-
-Markus Koetter (1):
-      Add extv3 X509 field support to --x509-username-field
-
-Matthew L. Creech (1):
-      Fix 2.2.0 build failure when management interface disabled
-
-Matthias Andree (1):
-      Skip rather than fail test in addressless FreeBSD jails.
-
-Robert Fischer (8):
-      Update man page with info about --capath
-      Update man page with info about --connect-timeout
-      Added info about --show-proxy-settings
-      Documented --x509-username-field option
-      Documented --errors-to-stderr option
-      Documented --push-peer-info option
-      Update man page with info about --remote-random-hostname
-      Added man page entry for --management-client
-
-Samuli Seppänen (19):
-      Add man page entry for --redirect-private
-      Change all CRLF linefeeds to LF linefeeds
-      Fix a bug in devcon source code handling
-      Removed Win2k from supported platforms list in INSTALL and win/openvpn.nsi
-      Fixed copying of tapinstall.exe to dist/bin when using prebuilt TAP-drivers
-      Fixed a bug with GUI icon deletion on upgrade from 2.2-RC or earlier
-      Fix a build-ca issue on Windows
-      Add new openssl.cnf to easy-rsa/Windows
-      Updated "easy-rsa" for OpenSSL 1.0.0
-      Made domake-win builds to use easy-rsa/2.0/openssl-1.0.0.cnf
-      Fixes to easy-rsa/2.0
-      Merged TODO.IPv6 with TODO.ipv6 and README.IPv6 with README.ipv6
-      Fixed a number of fatal build errors on Visual Studio 2008
-      Fix a Visual Studio 2008 build issue in socket.c
-      Additional Visual Studio 2008 build fixes to tun.c
-      Fixed a typo in win32.h that prevented building with Visual Studio
-      Fixed a regression causing VS2008/Python build failure
-      Fix a Visual Studio 2008 build error in tun.c
-      Fix a Visual Studio 2008 build error in options.c
-
-Simon Matter (1):
-      Fix issues with some older GCC compilers
-
-Stefan Hellermann (2):
-      plugin.h: update prototype of plugin_call dummy in !ENABLE_PLUGIN case
-      Fixed typo in plugin.h
-
-chantra (1):
-      Clarify --tmp-dir option
-
-smos (1):
-      Change the netsh.exe command from "add" to "set".
-
-2011.12.25 -- Version 2.x-master
-James Yonan (1):
-      Added support for "on-link" routes on Linux client -- these are
-      routes where the gateway is specified as an interface rather than
-      an address.  This allows redirect-gateway to work on Linux clients
-      whose connection to the internet is via a point-to-point link
-      such as PPP.
-
-      Note that at the moment, this capability is incompatible with
-      the "redirect-gateway block-local" directive -- this is because
-      the block-local directive blocks all traffic from the local LAN
-      except for the local and gateway addresses.  Since a PPP link
-      is essentially a subnet of two addresses, local and remote (i.e.
-      gateway), the set of addresses that would be blocked by block-local
-      is empty.  Therefore, the "redirect-gateway block-local" directive
-      will be ignored on PPP links.
-
-      To view the OpenVPN client's current determination of the default
-      gateway, use this command:
-
-        ./openvpn --show-gateway
-
-2011.03.24 -- Version 2.2-RC2
-Alon Bar-Lev (1):
-      Windows cross-compile cleanup
-
-David Sommerseth (2):
-      Open log files as text files on Windows
-      Clarify default value for the --inactive option.
-
-Gert Doering (1):
-      Implement IPv6 in TUN mode for Windows TAP driver.
-
-Samuli Seppänen (6):
-      Added support for prebuilt TAP-drivers. Automated embedding manifests.
-      Fixes to win/openvpn.nsi
-      Replaced config-win32.h with win/config.h.in
-      Updated INSTALL-win32.txt
-      Fixes to Makefile.am
-      Clarified --client-config-dir section on the man-page.
-
-Ville Skyttä (1):
-      Fix line continuation in chkconfig init script description.
-
-2011.02.28 -- Version 2.2-RC
-David Sommerseth (3):
-      Make the --x509-username-field feature an opt-in feature
-      Fix compiler warning when compiling against OpenSSL 1.0.0
-      Fix packaging of config-win32.h and service-win32/msvc.mak
-
-James Yonan (1):
-      Minor addition of logging info before and after execution of Windows net commands.
-
-Matthias Andree (1):
-      Change variadic macros to C99 style.
-
-Samuli Seppänen (15):
-      Added ENABLE_PASSWORD_SAVE to config-win32.h
-      Added a nmake makefile for openvpnserv.exe building
-      Moved TAP-driver version info to version.m4. Cleaned up win/settings.in.
-      Added helper functionality to win/wb.py
-      Added support for viewing config-win32.h paramters to win/show.py
-      Added comments and made small modifications to win/msvc.mak.in
-      Added command-line switch to win/build_all.py to skip TAP driver building
-      Added configure.h and version.m4 variable parsing to win/config.py
-      Added openvpnserv.exe building to win/build.py
-      Added comments to win/build_ddk.py
-      Several modifications to win/make_dist.py to allow building the NSI installer
-      Copied install-win32/setpath.nsi to win/setpath.nsi
-      Added first version of NSI installer script to win/openvpn.nsi
-      Changes to buildsystem patchset
-      Temporary snprintf-related fix to service-win32/openvpnserv.c
-
-2010.11.25 -- Version 2.2-beta5
-
-Samuli Seppänen (1):
-      Fixed an issue causing a build failure with MS Visual Studio 2008.
-
-2010.11.18 -- Version 2.2-beta4
-
-David Sommerseth (10):
-      Clarified --explicit-exit-notify man page entry
-      Clean-up: Remove pthread and mutex locking code
-      Clean-up: Remove more dead and inactive code paths
-      Clean-up: Removing useless code - hash related functions
-      Use stricter snprintf() formatting in socks_username_password_auth() (v3)
-      Fix compiler warnings about not used dummy() functions
-      Fixed potential misinterpretation of boolean logic
-      Only add some functions when really needed
-      Removed functions not being used anywhere
-      Merged add_bypass_address() and add_host_route_if_nonlocal()
-
-Gert Doering (3):
-      Integrate support for TAP mode on Solaris, written by Kazuyoshi Aizawa <[email protected]...>.
-      Make "topology subnet" work on Solaris
-      Improved man page entry for script_type
-
-James Yonan (5):
-      Fixed initialization bug in route_list_add_default_gateway (Gert Doering).
-      Implement challenge/response authentication support in client mode
-      Make base64.h have the same conditional compilation expression as base64.c.
-      Fixed compiling issues when using --disable-crypto
-      In verify_callback, the subject var should be freed by OPENSSL_free, not free
-
-Jesse Young (1):
-      Remove hardcoded path to resolvconf
-
-Lars Hupel (1):
-      Add HTTP/1.1 Host header
-
-Pierre Bourdon (1):
-      Adding support for SOCKS plain text authentication
-
-Samuli Seppänen (2):
-      Added check for variable CONFIGURE_DEFINES into options.c
-      Added command-line option parser and an unsigned build option to build_all.py
-
-2010.08.21 -- Version 2.2-beta3
-
-* Attempt to fix issue where domake-win build system was not properly
-  signing drivers and .exe files.
-
-  Added win/tap_span.py for building multiple versions of the TAP driver
-  and tapinstall binaries using different DDK versions to span from Win2K
-  to Win7 and beyond.
-
-* Community patches
-  David Sommerseth (2):
-      Test framework improvment - Do not FAIL if t_client.rc is missing
-      More t_client.sh updates - exit with SKIP when we want to skip
-
-  Gert Doering (4):
-      Fix compile problems on NetBSD and OpenBSD
-      Fix <net/if.h> compile time problems on OpenBSD for good
-      full "VPN client connect" test framework for OpenVPN
-      Build t_client.sh by configure at run-time.
-
-  chantra (1):
-      Fixes openssl-1.0.0 compilation warning
-
-2010.08.16 -- Version 2.2-beta2
-
-* Windows security issue:
-  Fixed potential local privilege escalation vulnerability in
-  Windows service. The Windows service did not properly quote the
-  executable filename passed to CreateService.  A local attacker
-  with write access to the root directory C:\ could create an
-  executable that would be run with the same privilege level as
-  the OpenVPN Windows service.  However, since non-Administrative
-  users normally lack write permission on C:\, this vulnerability
-  is generally not exploitable except on older versions of Windows
-  (such as Win2K) where the default permissions on C:\ would allow
-  any user to create files there.
-  Credit:  Scott Laurie, MWR InfoSecurity
-
-* Added Python-based based alternative build system for Windows using
-  Visual Studio 2008 (in win directory).
-
-* When aborting in a non-graceful way, try to execute do_close_tun in
-  init.c prior to daemon exit to ensure that the tun/tap interface is
-  closed and any added routes are deleted.
-
-* Fixed an issue where AUTH_FAILED was not being properly delivered
-  to the client when a bad password is given for mid-session reauth,
-  causing the connection to fail without an error indication.
-
-* Don't advance to the next connection profile on AUTH_FAILED errors.
-
-* Fixed an issue in the Management Interface that could cause
-  a process hang with 100% CPU utilization in --management-client
-  mode if the management interface client disconnected at the
-  point where credentials are queried.
-
-* Fixed an issue where if reneg-sec was set to 0 on the client,
-  so that the server-side value would take precedence,
-  the auth_deferred_expire_window function would incorrectly
-  return a window period of 0 seconds.  In this case, the
-  correct window period should be the handshake window
-  period.
-
-* Modified ">PASSWORD:Verification Failed" management interface
-  notification to include a client reason string:
-
-    >PASSWORD:Verification Failed: 'AUTH_TYPE' ['REASON_STRING']
-
-* Enable exponential backoff in reliability layer
-  retransmits.
-
-* Set socket buffers (SO_SNDBUF and SO_RCVBUF) immediately after
-  socket is created rather than waiting until after connect/listen.
-
-* Management interface performance optimizations:
-
-  1. Added env-filter MI command to perform filtering on env vars
-     passed through as a part of --management-client-auth
-
-  2. man_write will now try to aggregate output into larger blocks
-     (up to 1024 bytes) for more efficient i/o
-
-* Fixed minor issue in Windows TAP driver DEBUG builds
-  where non-null-terminated unicode strings were being
-  printed incorrectly.
-
-* Fixed issue on Windows with MSVC compiler, where TCP_NODELAY support
-  was not being compiled in.
-
-* Proxy improvements:
-
-  Improved the ability of http-auth "auto" flag to dynamically detect
-  the auth method required by the proxy.
-
-  Added http-auth "auto-nct" flag to reject weak proxy auth methods.
-
-  Added HTTP proxy digest authentication method.
-
-  Removed extraneous openvpn_sleep calls from proxy.c.
-
-* Implemented http-proxy-override and http-proxy-fallback directives to make it
-  easier for OpenVPN client UIs to start a pre-existing client config file with
-  proxy options, or to adaptively fall back to a proxy connection if a direct
-  connection fails.
-
-* Implemented a key/value auth channel from client to server.
-
-* Fixed issue where bad creds provided by the management interface
-  for HTTP Proxy Basic Authentication would go into an infinite
-  retry-fail loop instead of requerying the management interface for
-  new creds.
-
-* Added support for MSVC debugging of openvpn.exe in settings.in:
-
-  # Build debugging version of openvpn.exe
-  !define PRODUCT_OPENVPN_DEBUG
-
-* Implemented multi-address DNS expansion on the network field of route
-  commands.
-
-  When only a single IP address is desired from a multi-address DNS
-  expansion, use the first address rather than a random selection.
-
-* Added --register-dns option for Windows.
-
-  Fixed some issues on Windows with --log, subprocess creation
-  for command execution, and stdout/stderr redirection.
-
-* Fixed an issue where application payload transmissions on the
-  TLS control channel (such as AUTH_FAILED) that occur during
-  or immediately after a TLS renegotiation might be dropped. 
-
-* Added warning about tls-remote option in man page.
-
-2009.12.11 -- Version 2.1.1
-
-* Fixed some breakage in openvpn.spec (which is required to build an
-  RPM distribution) where it was referencing a non-existent
-  subdirectory in the tarball, causing it to fail (patch from
-  David Sommerseth).
-
-2009.12.11 -- Version 2.1.0
-
-* Fixed a couple issues in sample plugins auth-pam.c and down-root.c.
-  (1) Fail gracefully rather than segfault if calloc returns NULL.
-  (2) The openvpn_plugin_abort_v1 function can potentially be called
-  with handle == NULL.  Add code to detect this case, and if  so, avoid
-  dereferencing pointers derived from handle  (Thanks to David
-  Sommerseth for finding this bug).
-
-* Documented "multihome" option in the man page.
-
-2009.11.20 -- Version 2.1_rc22
-
-* Fixed a client-side bug on Windows that occurred when the
-  "dhcp-pre-release" or "dhcp-renew" options were combined with
-  "route-gateway dhcp".  The release/renew would not occur
-  because the Windows DHCP renew function is blocking and
-  therefore must be called from another process or thread
-  so as not to stall the tunnel.
-
-* Added a hard failure when peer provides a certificate chain
-  with depth > 16.  Previously, a warning was issued.
-
-2009.11.12 -- Version 2.1_rc21
-
-* Rebuilt OpenVPN Windows installer with OpenSSL 0.9.8l to address
-  CVE-2009-3555.  Note that OpenVPN has never relied on the session
-  renegotiation capabilities that are built into the SSL/TLS protocol,
-  therefore the fix in OpenSSL 0.9.8l (disable SSL/TLS renegotiation
-  completely) will not adversely affect OpenVPN mid-session SSL/TLS
-  renegotation or any other OpenVPN capabilities.
-
-* Added additional session renegotiation hardening.  OpenVPN has always
-  required that mid-session renegotiations build up a new SSL/TLS
-  session from scratch.  While the client certificate common name is
-  already locked against changes in mid-session TLS renegotiations, we
-  now extend this locking to the auth-user-pass username as well as all
-  certificate content in the full client certificate chain.
-
-2009.10.01 -- Version 2.1_rc20
-
-* Fixed a bug introduced in 2.1_rc17 (svn r4436) where using the
-  redirect-gateway option by itself, without any extra parameters,
-  would cause the option to be ignored.
-
-* Fixed build problem when ./configure --disable-server is used.
-
-* Fixed ifconfig command for "topology subnet" on FreeBSD (Stefan Bethke).
-
-* Added --remote-random-hostname option.
-
-* Added "load-stats" management interface command to get global server
-  load statistics.
-
-* Added new ./configure flags:
-
-  --disable-def-auth      Disable deferred authentication
-  --disable-pf            Disable internal packet filter
-
-* Added "setcon" directive for interoperability with SELinux (Sebastien
-  Raveau).
-
-* Optimized PUSH_REQUEST handshake sequence to shave several seconds
-  off of a typical client connection initiation.
-
-* The maximum number of "route" directives (specified in the config
-  file or pulled from a server) can now be configured via the new
-  "max-routes" directive.
-
-* Eliminated the limitation on the number of options that can be pushed
-  to clients, including routes.  Previously, all pushed options needed
-  to fit within a 1024 byte options string.
-
-* Added --server-poll-timeout option : when polling possible remote
-  servers to connect to in a round-robin fashion, spend no more than
-  n seconds waiting for a response before trying the next server.
-
-* Added the ability for the server to provide a custom reason string
-  when an AUTH_FAILED message is returned to the client.  This
-  string can be set by the server-side managment interface and read
-  by the client-side management interface.
-
-* client-kill management interface command, when issued on server, will
-  now send a RESTART message to client.
-  This feature is intended to make UDP clients respond the same as TCP
-  clients in the case where the server issues a RESTART message in
-  order to force the client to reconnect and pull a new options/route
-  list.
-
-2009.07.16 -- Version 2.1_rc19
-
-* In Windows TAP driver, refactor DHCP/ARP packet injection code to
-  use a DPC (deferred procedure call) to defer packet injection until
-  IRQL < DISPATCH_LEVEL, rather than calling NdisMEthIndicateReceive
-  in the context of AdapterTransmit.  This is an attempt to reduce kernel
-  stack usage, and prevent EXCEPTION_DOUBLE_FAULT BSODs that have been
-  observed on Vista.  Updated TAP driver version number to 9.6.
-
-* In configure.ac, use datadir instead of datarootdir for compatibility
-  with <autoconf-2.60.
-
-2009.06.07 -- Version 2.1_rc18
-
-* Fixed compile error on ./configure --enable-small
-
-* Fixed issue introduced in r4475 (2.1-rc17) where cryptoapi.c change
-  does not build on Windows on non-MINGW32.
-
-2009.05.30 -- Version 2.1_rc17
-
-* Reduce the debug level (--verb) at which received management interface
-  commands are echoed from 7 to 3.  Passwords will be filtered.
-
-* Fixed race condition in management interface recv code on
-  Windows, where sending a set of several commands to the
-  management interface in quick succession might cause the
-  latter commands in the set to be ignored.
-
-* Increased management interface input command buffer size
-  from 256 to 1024 bytes.
-
-* Minor tweaks to Windows build system.
-
-* Added "redirect-private" option which allows private subnets
-  to be pushed to the client in such a way that they don't accidently
-  obscure critical local addresses such as the DHCP server address and
-  DNS server addresses.
-
-* Added new 'autolocal' redirect-gateway flag.  When enabled, the OpenVPN
-  client will examine the routing table and determine whether (a) the
-  OpenVPN server is reachable via a locally connected interface, or (b)
-  traffic to the server must be forwarded through the default router.
-  Only add a special bypass route for the OpenVPN server if (b) is true.
-  If (a) is true, behave as if the 'local' flag is specified, and do not
-  add a bypass route.
-
-  The new 'autolocal' flag depends on the non-portable test_local_addr()
-  function in route.c, which is currently only implemented for Windows.
-  The 'autolocal' flag will act as a no-op on platforms that have not
-  yet defined a test_local_addr() function.
-
-* Increased TLS_CHANNEL_BUF_SIZE to 2048 from 1024 (this will allow for
-  more option content to be pushed from server to client).
-
-* Raised D_MULTI_DROPPED debug level to 4 from 3 to filter out (at debug
-  levels <=3) a common and usually innocuous warning.
-
-* Fixed issue of symbol conflicts interfering with Windows CryptoAPI
-  functionality (Alon Bar-Lev).
-
-* Fixed bug where the remote_X environmental variables were not being
-  set correctly when the 'local' option is specifed.
-
-2009.05.17 -- Version 2.1_rc16
-
-* Windows installer changes:
-
-  1. ifdefed out the check Windows version code which is causing
-  problems on Windows 7
-
-  2. don't define SF_SELECTED if it is already defined
-
-  3. Use LZMA instead of BZIP2 compression for better compression
-
-  4. Upgraded OpenSSL to 0.9.8k
-
-* Added the ability to read the configuration file
-  from stdin, when "stdin" is given as the config
-  file name.
-
-* Allow "management-client" directive to be used
-  with unix domain sockets.
-
-* Added errors-to-stderr option.  When enabled, fatal errors
-  that result in the termination of the daemon will be written
-  to stderr.
-
-* Added optional "nogw" (no gateway) flag to --server-bridge
-  to inhibit the pushing of the route-gateway parameter to
-  clients.
-
-* Added new management interface command "pid" to show the
-  process ID of the current OpenVPN process (Angelo Laub).
-
-* Fixed issue where SIGUSR1 restarts would fail if private
-  key was specified as an inline file.
-
-* Added daemon_start_time and daemon_pid environmental variables.
-
-* In management interface, added new ">CLIENT:ESTABLISHED" notification.
-
-* Build fixes:
-
-  1. Fixed some issues with C++ style comments that leaked into the code.
-
-  2. Updated configure.ac to work on MinGW64.
-
-  3. Updated common.h types for _WIN64.
-
-  4. Fixed issue involving an #ifdef in a macro reference that breaks early gcc
-     compilers.
-
-  5. In cryptoapi.c, renamed CryptAcquireCertificatePrivateKey to
-     OpenVPNCryptAcquireCertificatePrivateKey to work around
-     a symbol conflict in MinGW-5.1.4.
-
-2008.11.19 -- Version 2.1_rc15
-
-* Fixed issue introduced in 2.1_rc14 that may cause a
-  segfault when a --plugin module is used.
-
-* Added server-side --opt-verify option: clients that connect
-  with options that are incompatible with those of the server
-  will be disconnected (without this option, incompatible
-  clients would trigger a warning message in the server log
-  but would not be disconnected).
-
-* Added --tcp-nodelay option: Macro that sets TCP_NODELAY socket
-  flag on the server as well as pushes it to connecting clients.
-
-* Minor options check fix: --no-name-remapping is a
-  server-only option and should therefore generate an
-  error when used on the client.
-
-* Added --prng option to control PRNG (pseudo-random
-  number generator) parameters.  In previous OpenVPN
-  versions, the PRNG was hardcoded to use the SHA1
-  hash.  Now any OpenSSL hash may be used.  This is
-  part of an effort to remove hardcoded references to
-  a specific cipher or cryptographic hash algorithm.
-
-* Cleaned up man page synopsis.
-
-2008.11.16 -- Version 2.1_rc14
-
-* Added AC_GNU_SOURCE to configure.ac to enable struct ucred,
-  with the goal of fixing a build issue on Fedora 9 that was
-  introduced in 2.1_rc13.
-
-* Added additional method parameter to --script-security to preserve
-  backward compatibility with system() call semantics used in OpenVPN
-  2.1_rc8 and earlier.  To preserve backward compatibility use:
-
-    script-security 3 system
-
-* Added additional warning messages about --script-security 2
-  or higher being required to execute user-defined scripts or
-  executables.
-
-* Windows build system changes:
-
-  Modified Windows domake-win build system to write all openvpn.nsi
-  input files to gen, so that gen can be disconnected from
-  the rest of the source tree and makensis openvpn.nsi will
-  still function correctly.
-
-  Added additional SAMPCONF_(CA|CRT|KEY) macros to settings.in
-  (commented out by default).
-
-  Added optional files SAMPCONF_CONF2 (second sample configuration
-  file) and SAMPCONF_DH (Diffie-Helman parameters) to Windows
-  build system, and may be defined in settings.in.
-
-* Extended Management Interface "bytecount" command
-  to work when OpenVPN is running as a server.
-  Documented Management Interface "bytecount" command in
-  management/management-notes.txt.
-
-* Fixed informational message in ssl.c to properly indicate
-  deferred authentication.
-
-* Added server-side --auth-user-pass-optional directive, to allow
-  connections by clients that do not specify a username/password, when a
-  user-defined authentication script/module is in place (via
-  --auth-user-pass-verify, --management-client-auth, or a plugin module).
-
-* Changes to easy-rsa/2.0/pkitool and related openssl.cnf:
-
-  Calling scripts can set the KEY_NAME environmental variable to set
-  the "name" X509 subject field in generated certificates.
-
-  Modified pkitool to allow flexibility in separating the Common Name
-  convention from the cert/key filename convention.
-
-  For example:
-
-  KEY_CN="James's Laptop" KEY_NAME="james" ./pkitool james
-
-  will create a client certificate/key pair of james.crt/james.key
-  having a Common Name of "James's Laptop" and a Name of "james".
-
-* Added --no-name-remapping option to allow Common Name, X509 Subject,
-  and username strings to include any printable character including
-  space, but excluding control characters such as tab, newline, and
-  carriage-return (this is important for compatibility with external
-  authentication systems).
-
-  As a related change, added --status-version 3 format (and "status 3"
-  in the management interface) which uses the version 2 format except
-  that tabs are used as delimiters instead of commas so that there
-  is no ambiguity when parsing a Common Name that contains a comma.
-
-  Also, save X509 Subject fields to environment, using the naming
-  convention:
-
-  X509_{cert_depth}_{name}={value}
-
-  This is to avoid ambiguities when parsing out the X509 subject string
-  since "/" characters could potentially be used in the common name.
-
-* Fixed some ifconfig-pool issues that precluded it from being combined
-  with --server directive.
-
-  Now, for example, we can configure thusly:
-
-    server 10.8.0.0 255.255.255.0 nopool
-    ifconfig-pool 10.8.0.2 10.8.0.99 255.255.255.0
-
-  to have ifconfig-pool manage only a subset
-  of the VPN subnet.
-
-* Added config file option "setenv FORWARD_COMPATIBLE 1" to relax
-  config file syntax checking to allow directives for future OpenVPN
-  versions to be ignored.
-
-2008.10.07 -- Version 2.1_rc13
-
-* Bundled OpenSSL 0.9.8i with Windows installer.
-
-* Management interface can now listen on a unix
-  domain socket, for example:
-
-    management /tmp/openvpn unix
-
-  Also added management-client-user and management-client-group
-  directives to control which processes are allowed to connect
-  to the socket.
-
-* Copyright change to OpenVPN Technologies, Inc.
-
-2008.09.23 -- Version 2.1_rc12
-
-* Patched Makefile.am so that the new t_cltsrv-down.sh script becomes
-  part of the tarball (Matthias Andree).
-
-* Fixed --lladdr bug introduced in 2.1-rc9 where input validation code
-  was incorrectly expecting the lladdr parameter to be an IP address
-  when it is actually a MAC address (HoverHell).
-
-2008.09.14 -- Version 2.1_rc11
-
-* Fixed a bug that can cause SSL/TLS negotiations in UDP mode
-  to fail if UDP packets are dropped.
-
-2008.09.10 -- Version 2.1_rc10
-
-* Added "--server-bridge" (without parameters) to enable
-  DHCP proxy mode:  Configure server mode for ethernet
-  bridging using a DHCP-proxy, where clients talk to the
-  OpenVPN server-side DHCP server to receive their IP address
-  allocation and DNS server addresses.
-
-* Added "--route-gateway dhcp", to enable the extraction
-  of the gateway address from a DHCP negotiation with the
-  OpenVPN server-side LAN.
-
-* Fixed minor issue with --redirect-gateway bypass-dhcp or bypass-dns
-  on Windows.  If the bypass IP address is 0.0.0.0 or 255.255.255.255,
-  ignore it.
-
-* Warn when ethernet bridging that the IP address of the bridge adapter
-  is probably not the same address that the LAN adapter was set to
-  previously.
-
-* When running as a server, warn if the LAN network address is
-  the all-popular 192.168.[0|1].x, since this condition commonly
-  leads to subnet conflicts down the road.
-
-* Primarily on the client, check for subnet conflicts between
-  the local LAN and the VPN subnet.
-
-* Added a 'netmask' parameter to get_default_gateway, to return
-  the netmask of the adapter containing the default gateway.
-  Only implemented on Windows so far.  Other platforms will
-  return 255.255.255.0.  Currently the netmask information is
-  only used to warn about subnet conflicts.
-
-* Minor fix to cryptoapi.c to not compile itself unless USE_CRYPTO
-  and USE_SSL flags are enabled (Alon Bar-Lev).
-
-* Updated openvpn/t_cltsrv.sh (used by "make check") to conform to new
-  --script-security rules.  Also adds retrying if the addresses are in
-  use (Matthias Andree).
-
-* Fixed build issue with ./configure --disable-socks --disable-http.
-
-* Fixed separate compile errors in options.c and ntlm.c that occur
-  on strict C compilers (such as old versions of gcc) that require
-  that C variable declarations occur at the start of a {} block,
-  not in the middle.
-
-* Workaround bug in OpenSSL 0.9.6b ASN1_STRING_to_UTF8, which
-  the new implementation of extract_x509_field_ssl depends on.
-
-* LZO compression buffer overflow errors will now invalidate
-  the packet rather than trigger a fatal assertion.
-
-* Fixed minor compile issue in ntlm.c (mid-block declaration).
-
-* Added --allow-pull-fqdn option which allows client to pull DNS names
-  from server (rather than only IP address) for --ifconfig, --route, and
-  --route-gateway.  OpenVPN versions 2.1_rc7 and earlier allowed DNS names
-  for these options to be pulled and translated to IP addresses by default.
-  Now --allow-pull-fqdn will be explicitly required on the client to enable
-  DNS-name-to-IP-address translation of pulled options.
-
-* 2.1_rc8 and earlier did implicit shell expansion on script
-  arguments since all scripts were called by system().
-  The security hardening changes made to 2.1_rc9 no longer
-  use system(), but rather use the safer execve or CreateProcess
-  system calls.  The security hardening also introduced a
-  backward incompatibility with 2.1_rc8 and earlier in that
-  script parameters were no longer shell-expanded, so
-  for example:
-
-    client-connect "docc CLIENT-CONNECT"
-
-  would fail to work because execve would try to execute
-  a script called "docc CLIENT-CONNECT" instead of "docc"
-  with "CLIENT-CONNECT" as the first argument.
-
-  This patch fixes the issue, bringing the script argument
-  semantics back to pre 2.1_rc9 behavior in order to preserve
-  backward compatibility while still using execve or CreateProcess
-  to execute the script/executable.
-
-* Modified ip_or_dns_addr_safe, which validates pulled DNS names,
-  to more closely conform to RFC 3696:
-
-  (1) DNS name length must not exceed 255 characters
-
-  (2) DNS name characters must be limited to alphanumeric,
-      dash ('-'), and dot ('.')
-
-* Fixed bug in intra-session TLS key rollover that was introduced with
-  deferred authentication features in 2.1_rc8.
-
-2008.07.31 -- Version 2.1_rc9
-
-* Security Fix -- affects non-Windows OpenVPN clients running
-  OpenVPN 2.1-beta14 through 2.1-rc8 (OpenVPN 2.0.x clients are NOT
-  vulnerable nor are any versions of the OpenVPN server vulnerable).
-  An OpenVPN client connecting to a malicious or compromised
-  server could potentially receive an "lladdr" or "iproute" configuration
-  directive from the server which could cause arbitrary code execution on
-  the client. A successful attack requires that (a) the client has agreed
-  to allow the server to push configuration directives to it by including
-  "pull" or the macro "client" in its configuration file, (b) the client
-  successfully authenticates the server, (c) the server is malicious or has
-  been compromised and is under the control of the attacker, and (d) the
-  client is running a non-Windows OS.  Credit: David Wagner.
-  CVE-2008-3459
-
-* Miscellaneous defensive programming changes to multiple
-  areas of the code.  In particular, use of the system() call
-  for calling executables such as ifconfig, route, and
-  user-defined scripts has been completely revamped in favor
-  of execve() on unix and CreateProcess() on Windows.
-
-* In Windows build, package a statically linked openssl.exe to work around
-  observed instabilities in the dynamic build since the migration to
-  OpenSSL 0.9.8h.
-
-2008.06.11 -- Version 2.1_rc8
-
-* Added client authentication and packet filtering capability
-  to management interface.  In addition, allow OpenVPN plugins
-  to take advantage of deferred authentication and packet
-  filtering capability.
-
-* Added support for client-side connection profiles.
-
-* Fixed unbounded memory growth bug in environmental variable
-  code that could have caused long-running OpenVPN sessions
-  with many TLS renegotiations to incrementally
-  increase memory usage over time.
-
-* Windows release now packages openssl-0.9.8h.
-
-* Build system changes -- allow building on Windows using
-  autoconf/automake scripts (Alon Bar-Lev).
-
-* Changes to Windows build system to make it easier to do
-  partial builds, with a reduced set of prerequisites,
-  where only a subset of OpenVPN installer
-  components are built.  See ./domake-win comments.
-
-* Cleanup IP address for persistence interfaces for tap and also
-  using ifconfig, gentoo#209055 (Alon Bar-Lev).
-
-* Fall back to old version of extract_x509_field for OpenSSL 0.9.6.
-
-* Clarified tcp-queue-limit man page entry (Matti Linnanvuori).
-
-* Added new OpenVPN icon and installer graphic.
-
-* Minor pkitool changes.
-
-* Added --pkcs11-id-management option, which will cause OpenVPN to
-  query the management interface via the new NEED-STR asynchronous
-  notification query to get additional PKCS#11 options (Alon Bar-Lev).
-
-* Added NEED-STR management interface asynchronous query and
-  "needstr" management interface command to respond to the query
-  (Alon Bar-Lev).
-
-* Added Dragonfly BSD support (Francis-Gudin).
-
-* Quote device names before passing to up/down script (Josh Cepek).
-
-* Bracketed struct openvpn_pktinfo with #pragma pack(1) to
-  prevent structure padding from causing an incorrect length
-  to be returned by sizeof (struct openvpn_pktinfo) on 64-bit
-  platforms.
-
-* On systems that support res_init, always call it
-  before calling gethostbyname to ensure that
-  resolver configuration state is current.
-
-* Added NTLMv2 proxy support (Miroslav Zajic).
-
-* Fixed an issue in extract_x509_field_ssl where the extraction
-  would fail on the first field of the subject name, such as
-  the common name in:  /CN=foo/[email protected]...
-
-* Made "Linux ip addr del failed" error nonfatal.
-
-* Amplified --client-cert-not-required warning.
-
-* Added #pragma pack to proto.h.
-
-2008.01.29 -- Version 2.1_rc7
-
-* Added a few extra files that exist in the svn repo but were
-  not being copied into the tarball by make dist.
-
-* Fixup null interface on close, don't use ip addr flush (Alon Bar-Lev).
-
-2008.01.24 -- Version 2.1_rc6
-
-* Fixed options checking bug introduced in rc5 where legitimate configuration
-  files might elicit the error: "Options error: Parameter pkcs11_private_mode
-  can only be specified in TLS-mode, i.e. where --tls-server or --tls-client
-  is also specified."
-	
-2008.01.23 -- Version 2.1_rc5
-
-* Fixed Win2K TAP driver bug that was introduced by Vista fixes,
-  incremented driver version to 9.4.
-
-* Windows build system changes:
-
-  Incremented included OpenSSL version to openssl-0.9.7m.
-
-  Updated openssl.patch for openssl-0.9.7m and added some
-  brief usage comments to the head of the patch.
-
-  Added build-pkcs11-helper.sh for building the pkcs11-helper
-  library.
-
-  Integrated inclusion of pkcs11-helper into Windows build
-  system.
-
-  Upgraded TAP build scripts to use WDK 6001.17121
-  (Windows 2008 Server pre-RTM).
-
-* Windows installer changes:
-
-  Clean up the start menu folder.
-
-  Allow for a site-specific sample configuration file and keys
-  to be included in a custom installer (see SAMPCONF macros
-  in settings.in). 
-
-  New icon (temporary).
-
-* Added "forget-passwords" command to the management interface
-  (Alon Bar-Lev).
-
-* Added --management-signal option to signal SIGUSR1 when the
-  management interface disconnects (Alon Bar-Lev).
-
-* Modified command line and config file parser to allow
-  quoted strings using single quotes ('') (Alon Bar-Lev).
-
-* Use pkcs11-helper as external library, can be downloaded from
-  https://www.opensc-project.org/pkcs11-helper (Alon Bar-Lev).
-
-* Fixed interim memory growth issue in TCP connect loop where
-  "TCP: connect to %s failed, will try again in %d seconds: %s"
-  is output.
-
-* Fixed bug in epoll driver in event.c, where the lack of a
-  handler for EPOLLHUP could cause 99% CPU usage.
-
-* Defined ALLOW_NON_CBC_CIPHERS for people who don't
-  want to use a CBC cipher for OpenVPN's data channel.
-
-* Added PLUGIN_LIBDIR preprocessor string to prepend a default
-  plugin directory to the dlopen search list when the user
-  specifies the basename of the plugin only (Marius Tomaschewski).
-
-* Rewrote extract_x509_field and modified COMMON_NAME_CHAR_CLASS
-  to allow forward slash characters ("/") in the X509 common name
-  (Pavel Shramov).
-
-* Allow OpenVPN to run completely unprivileged under Linux
-  by allowing openvpn --mktun to be used with --user and --group
-  to set the UID/GID of the tun device node.  Also added --iproute
-  option to allow an alternative command to be executed in place
-  of the default iproute2 command (Alon Bar-Lev).
-
-* Fixed --disable-iproute2 in ./configure to actually disable
-  iproute2 usage (Alon Bar-Lev).
-
-* Added --management-forget-disconnect option -- forget
-  passwords when management session disconnects (Alon Bar-Lev).
-	
-2007.04.25 -- Version 2.1_rc4
-
-* Worked out remaining issues with TAP driver signing
-  on Vista x64.  OpenVPN will now run on Vista x64
-  with driver signing enforcement enabled.
-
-* Fixed 64-bit portability bug in time_string function
-  (Thomas Habets).
-
-2007.04.22 -- Version 2.1_rc3
-
-* Additional fixes to TAP driver for Windows x64.  Driver
-  now runs successfully on Vista x64 if driver signing
-  enforcement is disabled.
-	
-* The Windows Installer and TAP driver are now signed by
-  OpenVPN Solutions LLC (in addition to the usual GnuPG
-  signatures).
-
-* Added OpenVPN GUI (Mathias Sundman version) as install
-  option in Windows installer.
-
-* Clean up configure on FreeBSD for recent autotool versions
-  that require that all .h files have to be compiled.
-  Also, FreeBSD install does not support GNU long options
-  which the Makefile in easy-rsa/2.0 uses (not checked the
-  others as we don't install those on Gentoo) (Roy Marples).
-
-* Added additional scripts to easy-rsa/Windows for working
-  with password-protected keys; also add -extensions server
-  option when generating server cert via
-  build-key-server-pass.bat (Daniel Zauft).
-	
-2007.02.27 -- Version 2.1_rc2
-
-* auth-pam change:  link with -lpam rather
-  than dlopen (Roy Marples).
-
-* Prevent SIGUSR1 or SIGHUP from causing program
-  exit from initial management hold.
-
-* SO_REUSEADDR should not be set on Windows TCP sockets
-  because it will cause bind to succeed on port conflicts.
-
-* Added time_ascii, time_duration, and time_unix
-  environmental variables for plugins and callback
-  scripts.
-
-* Fixed issue where OpenVPN does not apply the --txqueuelen option
-  to persistent interfaces made with --mktun (Roy Marples).
-
-* Attempt at rational signal handling when in the
-  management hold state.  During management hold, ignore
-  SIGUSR1/SIGHUP signals thrown with the "signal" command.
-  Also, "signal" command will now apply remapping as
-  specified with the --remap-usr1 option.
-  When a signal entered using the "signal" command from a management
-  hold is ignored, output: >HOLD:Waiting for hold release
-
-* Fixed issue where struct env_set methods that
-  change the value of an existing name=value pair
-  would delay the freeing of the memory held by
-  the previous name=value pair until the underlying
-  client instance object is closed.
-  This could cause a server that handles long-term
-  client connections, resulting in many periodic calls
-  to verify_callback, to needlessly grow the env_set
-  memory allocation until the underlying client instance
-  object is closed.
-
-* Renamed TAP-Win32 driver from tap0801.sys to tap0901.sys
-  to reflect the fact that Vista has blacklisted the tap0801.sys
-  file name due to previous compatibility issues which have now
-  been resolved.  TAP-Win32 major/minor version number is now 9/1.
-
-* Windows installer will delete a previously installed
-  tap0801.sys TAP driver before installing tap0901.sys.
-
-* Added code to Windows installer to fail gracefully on 64 bit
-  installs until 64-bit TAP driver issues can be resolved.
-
-* Added code to Windows installer to fail gracefully on
-  versions of Windows which are not explicitly supported.
-
-* The Windows version will now use a default route-delay
-  of 5 seconds to deal with an apparent routing table race
-  condition on Vista.
-
-* Worked around an incompatibility in the Windows Vista
-  version of CreateIpForwardEntry as described in
-  http://www.nynaeve.net/?p=59
-  This issue would cause route additions using the
-  IP Helper API to fail on Vista.
-
-* On Windows, revert to "ip-win32 dynamic" as the default.
-
-2006.10.31 -- Version 2.1_rc1
-
-* Support recovery (return to hold) from signal at
-  management password prompt.
-
-* Added workaround for OpenSC PKCS#11 bug#108
-  (Alon Bar-Lev).
-
-2006.10.01 -- Version 2.1-beta16
-
-* Windows installer updated with OpenSSL 0.9.7l DLLs to fix
-  published vulnerabilities.
-
-* Fixed TAP-Win32 bug that caused BSOD on Windows Vista
-  (Henry Nestler).
-	
-* Autodetect 32/64 bit Windows in installer and install
-  appropriate TAP driver (Mathias Sundman, Hypherion).
-	
-* Fixed bug in loopback self-test introduced
-  in 2.1-beta15 where self test as invoked by
-  "make check" would not properly exit after
-  2 minutes (Paul Howarth).
-
-2006.09.12 -- Version 2.1-beta15
-
-* Windows installer updated with OpenSSL 0.9.7k DLLs to fix
-  RSA Signature Forgery (CVE-2006-4339).
-
-* Fixed bug introduced with the --port-share directive
-  (back in 2.1-beta9 which causes TLS soft resets
-  (1 per hour by default) in TCP server mode to force
-  a blockage of tunnel packets and later time-out and
-  restart the connection.
-
-* easy-rsa update (Alon Bar-Lev)
-  Makefile (install) is now available so that
-  distribs will be able to install it safely.
-
-* PKCS#11 changes: (Alon Bar-Lev) 
-  - Modified ssl.c to not FATAL and return to init.c
-    so auth-retry will work.
-  - Modifed pkcs11-helper.c to fix some problem with
-    multiple providers.
-  - Added retry counter to PKCS#11 PIN hook.
-  - Modified PKCS#11 PIN retry loop to return correct error
-    code when PIN is incorrect.
-  - Fix handling (ignoring) zero sized attributes.
-  - Fix gcc-2 issues.
-  - Fix openssl 0.9.6 (first version) issues.
-
-* Minor fixes of lladdr (Alon Bar-Lev)
-  Updated makefile.w32-vc to include lladdr.*, updated
-  linkage libraries.
-  Modified lladdr.c to be compiled under visual C.
-
-* Added two new management states:
-   OPENVPN_STATE_RESOLVE      -- DNS lookup
-   OPENVPN_STATE_TCP_CONNECT  -- Connecting to TCP server
-
-* Echo management state change to log.
-
-* Minor syshead.h change for NetBSD to allow
-  TCP_NODELAY flag to work.
-
-* Modified --port-share code to remove the assumption that
-  CMSG_SPACE always evaluates to a constant, to enable
-  compilation on NetBSD and possibly other BSDs as well.
-
-* Eliminated gcc 3.3.3 warnings on NetBSD
-  when ./configure --enable-strict is used.
-
-* Added optional minimum-number-of-bytes parameter
-  to --inactive directive.
-
-2006.04.13 -- Version 2.1-beta14
-
-* Fixed Windows server bug in time backtrack handling code which
-  could cause TLS negotiation failures on legitimate clients.
-	
-* Rewrote gettimeofday function for Windows to be
-  simpler and more efficient.
-	
-* Merged PKCS#11 extensions to easy-rsa/2.0  (Alon Bar-Lev).
-
-* Added --route-metric option to set a default route metric
-  for --route (Roy Marples).
-
-* Added --lladdr option to specify the link layer (MAC) address
-  for the tap interface on non-Windows platforms (Roy Marples).
-
-2006.04.12 -- Version 2.1-beta13
-
-* Code added in 2.1-beta7 and 2.0.6-rc1 to extend byte counters
-  to 64 bits caused a bug in the Windows version which has now
-  been fixed.  The bug could cause intermittent crashes.
-	
-2006.04.05 -- Version 2.1-beta12
-
-* Security Vulnerability -- An OpenVPN client connecting to a
-  malicious or compromised server could potentially receive
-  "setenv" configuration directives from the server which could
-  cause arbitrary code execution on the client via a LD_PRELOAD
-  attack.  A successful attack appears to require that (a) the
-  client has agreed to allow the server to push configuration
-  directives to it by including "pull" or the macro "client" in
-  its configuration file, (b) the client configuration file uses
-  a scripting directive such as "up" or "down", (c) the client
-  succesfully authenticates the server, (d) the server is
-  malicious or has been compromised and is under the control of
-  the attacker, and (e) the attacker has at least some level of
-  pre-existing control over files on the client (this might be
-  accomplished by having the server respond to a client web request
-  with a specially crafted file).  Credit: Hendrik Weimer.
-  CVE-2006-1629.
-
-  The fix is to disallow "setenv" to be pushed to clients from
-  the server, and to add a new directive "setenv-safe" which is
-  pushable from the server, but which appends "OPENVPN_" to the
-  name of each remotely set environmental variable.
-
-* "topology subnet" fix for FreeBSD (Benoit Bourdin).
-
-* PKCS11 fixes (Alon Bar-Lev).  For full description:
-  svn log -r990 http://svn.openvpn.net/projects/openvpn/branches/BETA21
-	
-* When deleting routes under Linux, use the route metric
-  as a differentiator to ensure that the route teardown
-  process only deletes the identical route which was originally
-  added via the "route" directive (Roy Marples).
-
-* Fix the t_cltsrv.sh file in FreeBSD 4 jails
-  (Matthias Andree, Dirk Meyer, Vasil Dimov).
-
-* Extended tun device configure code to support ethernet
-  bridging on NetBSD (Emmanuel Kasper).
-
-2006.02.19 -- Version 2.1-beta11
-
-* Fixed --port-share bug that caused premature closing
-  of proxied sessions.
-
-2006.02.17 -- Version 2.1-beta10
-
-* Fixed --port-share breakage introduced in 2.1-beta9.
-
-2006.02.16 -- Version 2.1-beta9
-
-* Added --port-share option for allowing OpenVPN and HTTPS
-  server to share the same port number.
-* Added --management-client option to connect as a client
-  to management GUI app rather than be connected to as a
-  server.
-* Added "bytecount" command to management interface.
-* --remote-cert-tls fixes (Alon Bar-Lev).
-
-2006.01.03 -- Version 2.1-beta8
-
-* --remap-usr1 will now also remap signals thrown during
-  initialization.
-* Added --connect-timeout option to control the timeout
-  on TCP client connection attempts (doesn't work on all
-  OSes).  This patch also makes OpenVPN signalable during
-  TCP connection attempts.
-* Fixed bug in acinclude.m4 where capability of compiler
-  to handle zero-length arrays in structs is tested
-  (David Stipp).
-* Fixed typo in manage.c where inline function declaration
-  was declared without the "static" keyword (David Stipp).
-* Patch to support --topology subnet on Mac OS X (Mathias Sundman).
-* Added --auto-proxy directive to auto-detect HTTP or SOCKS
-  proxy settings (currently Windows only).
-* Removed redundant base64 code.
-* Better sanity checking of --server and --server-bridge
-  IP pool ranges, so as not to hit the assertion at
-  pool.c:119 (2.0.5).
-* Fixed bug where --daemon and --management-query-passwords
-  used together would cause OpenVPN to block prior to
-  daemonization.
-* Fixed client/server race condition which could occur
-  when --auth-retry interact is set and the initially
-  provided auth-user-pass credentials are incorrect,
-  forcing a username/password re-query.
-* Fixed bug where if --daemon and --management-hold are
-  used together, --user or --group options would be ignored.
-* --ip-win32 adaptive is now the default.
-* --ip-win32 netsh (or --ip-win32 adaptive when in netsh
-  mode) can now set DNS/WINS addresses on the TAP-Win32
-  adapter.
-* Added new option --route-method adaptive (Win32)
-  which tries IP helper API first, then falls back to
-  route.exe.
-* Made --route-method adaptive the default.
-	
-2005.11.12 -- Version 2.1-beta7
-
-* Allow blank passwords to be passed via the management
-  interface.
-* Fixed bug where "make check" inside a FreeBSD "jail"
-  would never complete (Matthias Andree).
-* Fixed bug where --server directive in --dev tap mode
-  claimed that it would support subnets of /30 or less
-  but actually would only accept /29 or less.
-* Extend byte counters to 64 bits (M. van Cuijk).
-* Fixed bug in Linux get_default_gateway function
-  introduced in 2.0.4, which would cause redirect-gateway
-  on Linux clients to fail.
-* Moved easy-rsa 2.0 scripts to easy-rsa/2.0 to
-  be compatible with 2.0.x distribution.
-* Documented --route-nopull.
-* Documented --ip-win32 adaptive.
-* Windows build now linked with LZO2.
-* Allow ca, cert, key, and dh files to be specified
-  inline via XML-like syntax without needing to
-  reference an explicit file.
-  For example:
-  <ca>
-	data here...
-  </ca>
-* Allow plugin and push directives to have multi-line
-  parameter lists such as:
-  <plugin>
-    my-plugin.so
-    parm1
-    parm2
-  </plugin>
-* Added connect-retry-max option (Alon Bar-Lev).
-* Fixed problems where signals thrown during initialization
-  were not returning to a management-hold state.
-* Added a backtrack-hardened system time algorithm.
-* Added --remote-cert-ku, --remote-cert-eku, and
-  --remote-cert-tls options for verifying certificate
-  attributes (Alon Bar-Lev).
-* For Windows, reverted --ip-win32 default back to "dynamic".
-  To use new adaptive mode, set explicitly.
-	
-2005.11.01 -- Version 2.1-beta6
-
-* Security fix (merged from 2.0.4) -- Affects non-Windows
-  OpenVPN clients of version 2.0 or higher which connect to
-  a malicious or compromised server.  A format string
-  vulnerability in the foreign_option function in options.c
-  could potentially allow a malicious or compromised server
-  to execute arbitrary code on the client.  Only
-  non-Windows clients are affected.  The vulnerability
-  only exists if (a) the client's TLS negotiation with
-  the server succeeds, (b) the server is malicious or
-  has been compromised such that it is configured to
-  push a maliciously crafted options string to the client,
-  and (c) the client indicates its willingness to accept
-  pushed options from the server by having "pull" or
-  "client" in its configuration file (Credit: Vade79).
-  CVE-2005-3393
-* Security fix -- (merged from 2.0.4) Potential DoS
-  vulnerability on the server in TCP mode.  If the TCP
-  server accept() call returns an error status, the resulting
-  exception handler may attempt to indirect through a NULL
-  pointer, causing a segfault.  Affects all OpenVPN 2.0 versions.
-  CVE-2005-3409
-* Fix attempt of assertion at multi.c:1586 (note that
-  this precise line number will vary across different
-  versions of OpenVPN).
-* Windows reliability changes:
-  (a) Added code to make sure that the local PATH environmental
-      variable points to the Windows system32 directory.
-  (b) Added new --ip-win32 adaptive mode which tries 'dynamic'
-      and then fails over to 'netsh' if the DHCP negotiation fails.
-  (c) Made --ip-win32 adaptive the default.
-* More PKCS#11 additions/changes (Alon Bar-Lev).
-* Added ".PHONY: plugin" to Makefile.am to work around
-  "make dist" issue.
-* Fixed double fork issue that occurs when --management-hold
-  is used.
-* Moved TUN/TAP read/write log messages from --verb 8 to 6.
-* Warn when multiple clients having the same common name or
-  username usurp each other when --duplicate-cn is not used.
-* Modified Windows and Linux versions of get_default_gateway
-  to return the route with the smallest metric
-  if multiple 0.0.0.0/0.0.0.0 entries are present.
-* Added ">NEED-OK" alert and "needok" command to management
-  interface to provide a general interface for sending
-  alerts to the end-user.  Used by the PKCS#11 code
-  to send Token Insertion Requests to the user.
-* Added actual remote address used to the ">STATE" alert
-  in the management interface (Rolf Fokkens).
-
-2005.10.17 -- Version 2.1-beta4
-
-* Fixed bug introduced in 2.1-beta3 where management
-  socket bind would fail.
-* --capath fix in ssl.c (Zhuang Yuyao).
-* Added ".PHONY: plugin" to Makefile.am, reverted
-  location of "plugin" directory (thanks to
-  Matthias Andree for figuring this out).
-	
-2005.10.16 -- Version 2.1-beta3
-
-* Added PKCS#11 support (Alon Bar-Lev).
-* Enable the use of --ca together with --pkcs12.  If --ca is
-  used at the same time as --pkcs12, the CA certificate is loaded
-  from the file specified by --ca regardless if the pkcs12 file
-  contains a CA cert or not (Mathias Sundman).
-* Merged --capath patch (Thomas Noel).
-* Merged --multihome patch.
-* Added --bind option for TCP client connections (Ewan Bhamrah
-  Harley).
-* Moved "plugin" directory to "plugins" to deal with strange
-  automake problem that ended up being also fixable with
-  ".PHONY: plugin" in Makefile.am.
-
-2005.10.13 -- Version 2.1-beta2
-
-* Made --sndbuf and --rcvbuf pushable.
-
-2005.10.01 -- Version 2.1-beta1
-
-* Made LZO setting pushable.
-* Renamed sample-keys/tmp-ca.crt to ca.crt.
-* Fixed bug where remove_iroutes_from_push_route_list
-  was missing routes if those routes had
-  an implied netmask (by omission) of 255.255.255.255. 
-* Merged with 2.0.3-rc1
-* easy-rsa/2.0 moved to easy-rsa
-* old easy-rsa moved to easy-rsa/1.0
-
-2005.09.23 -- Version 2.0.2-TO4
-
-* Added feature to TAP-Win32 adapter to allow it to be
-  opened from non-administrator mode.  This feature
-  is enabled by default, and can be enabled/disabled
-  in the adapter advanced properties dialog.
-* Added --allow-nonadmin standalone option for Windows to
-  set TAP adapter to allow non-admin access.  This
-  is a user-mode version of the code, and duplicates
-  the same feature as the above entry.
-* Added fix that attempts to solve corner case of tunnel not
-  forwarding packets when system clock is reset to an earlier time.
-* Added --redirect-gateway bypass-dns option.  (Developers:
-  To add bypass-dhcp or bypass-dns support to other OSes,
-  add a get_bypass_addresses function to route.c for
-  your OS.)
-* Added OPENVPN_PLUGIN_CLIENT_CONNECT_V2 plugin callback, which
-  allows a client-connect plugin to return configuration text
-  in memory, rather than via a file.
-* Fixed a bug where --mode server --proto tcp-server --cipher none
-  operation could cause tunnel packet truncation.
-* openvpn --version will show [LZO1] or [LZO2], depending on
-  version that was linked.
-
-2005.09.07 -- Version 2.0.2-TO1
-
-* Added --topology directive.  See man page.
-* Added --redirect-gateway bypass-dhcp option to add a route
-  allowing DHCP packets to bypass the tunnel, when the
-  DHCP server is non-local.  Currently only implemented
-  on Windows clients.
-* Modified OpenVPN Service on Windows to declare the DHCP
-  client service as a dependency.
-* Extended the plugin interface to allow plugins to declare
-  per-client constructor and destructor functions, to make
-  it simpler for plugins to maintain per-client state.
-
-2005.09.25 -- Version 2.0.3-rc1	
-
-* openvpn_plugin_abort_v1 function wasn't being properly
-  registered on Windows.
-* Fixed a bug where --mode server --proto tcp-server --cipher none
-  operation could cause tunnel packet truncation.
-
-2005.08.25 -- Version 2.0.2
-
-* No change from 2.0.2-rc1.
-
-2005.08.24 -- Version 2.0.2-rc1
-
-* Fixed regression bug in Win32 installer, introduced in 2.0.1,
-  which incorrectly set OpenVPN service to autostart.
-* Don't package source code zip file in Windows installer
-  in order to reduce the size of the installer.  The source
-  zip file can always be downloaded separately if needed.
-* Fixed bug in route.c in FreeBSD, Darwin, OpenBSD and NetBSD
-  version of get_default_gateway.  Allocated socket for route
-  manipulation is never freed so number of mbufs continuously
-  grow and exhaust system resources after a while (Jaroslav Klaus).
-* Fixed bug where "--proto tcp-server --mode p2p --management
-  host port" would cause the management port to not respond until
-  the OpenVPN peer connects.
-* Modified pkitool script to be /bin/sh compatible (Johnny Lam).
-
-2005.08.16 -- Version 2.0.1
-	
-* Security Fix -- DoS attack against server when run with "verb 0" and
-  without "tls-auth".  If a client connection to the server fails
-  certificate verification, the OpenSSL error queue is not properly
-  flushed, which can result in another unrelated client instance on the
-  server seeing the error and responding to it, resulting in disconnection
-  of the unrelated client (CAN-2005-2531).
-* Security Fix -- DoS attack against server by authenticated client.
-  This bug presents a potential DoS attack vector against the server
-  which can only be initiated by a connected and authenticated client.
-  If the client sends a packet which fails to decrypt on the server,
-  the OpenSSL error queue is not properly flushed, which can result in
-  another unrelated client instance on the server seeing the error and
-  responding to it, resulting in disconnection of the unrelated client
-  (CAN-2005-2532).  Credit: Mike Ireton.
-* Security Fix -- DoS attack against server by authenticated client.
-  A malicious client in "dev tap" ethernet bridging mode could
-  theoretically flood the server with packets appearing to come from
-  hundreds of thousands of different MAC addresses, causing the OpenVPN
-  process to deplete system virtual memory as it expands its internal
-  routing table.  A --max-routes-per-client directive has been added
-  (default=256) to limit the maximum number of routes in OpenVPN's
-  internal routing table which can be associated with a given client
-  (CAN-2005-2533).
-* Security Fix -- DoS attack against server by authenticated client.
-  If two or more client machines try to connect to the server at the
-  same time via TCP, using the same client certificate, and when
-  --duplicate-cn is not enabled on the server, a race condition can
-  crash the server with "Assertion failed at mtcp.c:411"
-  (CAN-2005-2534).
-* Fixed server bug where under certain circumstances, the client instance
-  object deletion function would try to delete iroutes which had never been
-  added in the first place, triggering "Assertion failed at mroute.c:349".
-* Added --auth-retry option to prevent auth errors from being fatal
-  on the client side, and to permit username/password requeries in case
-  of error.  Also controllable via new "auth-retry" management interface
-  command.  See man page for more info.
-* Added easy-rsa 2.0 scripts to the tarball in easy-rsa/2.0
-* Fixed bug in openvpn.spec where rpmbuild --define 'without_pam 1'
-  would fail to build.
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.35.1

Part of the diff is not shown here. View the raw message.

#2 lore raw
In reply to Gert Doering

Patch has been applied to the master branch.

commit 3cb40b22ae6133eb7b000347abbe392c3dbabeac

Author: Gert Doering
Date:   Wed Aug 10 10:47:01 2022 +0200
     Remove outdated information from ChangeLog, point at release branches.

     Signed-off-by: Gert Doering <[email protected]...>
     Acked-by: Arne Schwabe <[email protected]...>
     Message-Id: <[email protected]...>
     URL: https://www.mail-archive.com/[email protected]/msg24854.html
     Signed-off-by: Gert Doering <[email protected]...>

--
kind regards,

Gert Doering