Skip to contentSkip to conversation

iio: temperature: mlx90632: Add supply regulator

PATCH In review Crt Mori 2 participants 2 messages Aug 8, 2022 – Aug 14, 2022 IIO

lore
Share & tools
lore

Crt Mori

author
#0 lore raw

v3 cover iio: temperature: mlx90632: Add supply regulator

Add supply regulator to the sensor as initial update before proper power management is presented. This will reduce the diff for the following patches.

Changes in v3:

- Style changes of few more arguments in one line

Changes in v2:

- Regulator voltage was removed as per comments from Jonathan Cameron and Lars-Peter Clausen
- Style handling for the error reporting of the regulator DT binding was adjusted
- NEW: Delay function was created and grouped together with call from the reset command, to ensure consistency and reduce the amount of code.

Crt Mori (2):
iio: temperature: mlx90632 Add supply regulator to sensor
dt-bindings: iio: mlx90632 Add supply regulator documentation

 .../iio/temperature/melexis,mlx90632.yaml     |  4 ++
 drivers/iio/temperature/mlx90632.c            | 61 +++++++++++++++++--
 2 files changed, 60 insertions(+), 5 deletions(-)
Signature · 1 line
2.34.1
maintainer
#1 lore raw
Quoted 4 lines · On Mon, 8 Aug 2022 16:48:04 +0200 Crt Mori <[email protected]> wrote:

Add supply regulator to the sensor as initial update before proper power management is presented. This will reduce the diff for the following patches.

Hi Crt,

Series applied to what will be the togreg branch of iio.git after I've rebased on rc1. Until then pushed out as testing for 0-day to see if it can find anything we missed.

btw, your series are not coming through as threads which makes them (slightly) harder to apply. For whatever reason the reply-to header field on the emails isn't set.

Thanks,

Jonathan

Quoted 22 lines

Changes in v3:

- Style changes of few more arguments in one line

Changes in v2:

- Regulator voltage was removed as per comments from Jonathan Cameron and Lars-Peter Clausen
- Style handling for the error reporting of the regulator DT binding was adjusted
- NEW: Delay function was created and grouped together with call from the reset command, to ensure consistency and reduce the amount of code.

Crt Mori (2):
iio: temperature: mlx90632 Add supply regulator to sensor
dt-bindings: iio: mlx90632 Add supply regulator documentation

 .../iio/temperature/melexis,mlx90632.yaml     |  4 ++
 drivers/iio/temperature/mlx90632.c            | 61 +++++++++++++++++--
 2 files changed, 60 insertions(+), 5 deletions(-)