Revert "mlxsw: core: Use different get_trend() callbacks for different thermal zones"
Subsystems (3)
PATCH v2 1/2 Revert "mlxsw: core: Use different get_trend() callbacks for different thermal zones"
This reverts commit 2dc2f760052da4925482ecdcdc5c94d4a599153c.
As discussed in the thread:
https://lore.kernel.org/all/[email protected]/
the feature provided by commits 2dc2f760052da and 6f73862fabd93 is actually already handled by the thermal framework via the cooling device state aggregation, thus all this code is pointless.
No conflict happened when reverting the patch.
--- .../ethernet/mellanox/mlxsw/core_thermal.c | 23 ++++--------------- 1 file changed, 4 insertions(+), 19 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +4 -19
@@ -345,7 +345,8 @@ static int mlxsw_thermal_set_trip_hyst(struct thermal_zone_device *tzdev,static int mlxsw_thermal_trend_get (struct thermal_zone_device *tzdev,int trip,enum thermal_trend *trend) { -struct mlxsw_thermal *thermal = tzdev->devdata; +struct mlxsw_thermal_module *tz = tzdev->devdata; +struct mlxsw_thermal *thermal = tz->parent;if (trip <0 || trip >=MLXSW_THERMAL_NUM_TRIPS )return -EINVAL ;
@@ -537,22 +538,6 @@ mlxsw_thermal_module_trip_hyst_set(struct thermal_zone_device *tzdev, int trip,return 0 ; } -static int mlxsw_thermal_module_trend_get (struct thermal_zone_device *tzdev, -int trip,enum thermal_trend *trend) -{ -struct mlxsw_thermal_module *tz = tzdev->devdata; -struct mlxsw_thermal *thermal = tz->parent; - -if (trip <0 || trip >=MLXSW_THERMAL_NUM_TRIPS ) -return -EINVAL ; - -if (tzdev == thermal->tz_highest_dev) -return 1 ; - - *trend =THERMAL_TREND_STABLE ; -return 0 ; -} -static struct thermal_zone_device_ops mlxsw_thermal_module_ops = { .bind = mlxsw_thermal_module_bind, .unbind = mlxsw_thermal_module_unbind,
@@ -562,7 +547,7 @@ static struct thermal_zone_device_ops mlxsw_thermal_module_ops = { .set_trip_temp = mlxsw_thermal_module_trip_temp_set, .get_trip_hyst = mlxsw_thermal_module_trip_hyst_get, .set_trip_hyst = mlxsw_thermal_module_trip_hyst_set, - .get_trend = mlxsw_thermal_module_trend_get, + .get_trend = mlxsw_thermal_trend_get, }; static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev,
@@ -599,7 +584,7 @@ static struct thermal_zone_device_ops mlxsw_thermal_gearbox_ops = { .set_trip_temp = mlxsw_thermal_module_trip_temp_set, .get_trip_hyst = mlxsw_thermal_module_trip_hyst_get, .set_trip_hyst = mlxsw_thermal_module_trip_hyst_set, - .get_trend = mlxsw_thermal_module_trend_get, + .get_trend = mlxsw_thermal_trend_get, }; static int mlxsw_thermal_get_max_state(struct thermal_cooling_device *cdev,
Signature · 1 line
2.34.1
PATCH v2 2/2 Revert "mlxsw: core: Add the hottest thermal zone detection"
This reverts commit 6f73862fabd93213de157d9cc6ef76084311c628.
As discussed in the thread:
https://lore.kernel.org/all/[email protected]/
the feature provided by commits 2dc2f760052da and 6f73862fabd93 is actually already handled by the thermal framework via the cooling device state aggregation, thus all this code is pointless.
The revert conflicts with the following changes:
- 7f4957be0d5b8: thermal: Use mode helpers in drivers
- 6a79507cfe94c: mlxsw: core: Extend thermal module with per QSFP module thermal zones
These conflicts were fixed and the resulting changes are in this patch.
---
v2:
- Fix 'err' not used as reported by kbuild test:
https://lore.kernel.org/all/[email protected]/
--- .../ethernet/mellanox/mlxsw/core_thermal.c | 64 ++----------------- 1 file changed, 4 insertions(+), 60 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +4 -60
@@ -22,7 +22,6 @@#define MLXSW_THERMAL_HYSTERESIS_TEMP 5000/* 5C */ #define MLXSW_THERMAL_MODULE_TEMP_SHIFT (MLXSW_THERMAL_HYSTERESIS_TEMP * 2)#define MLXSW_THERMAL_ZONE_MAX_NAME 16 -#define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0)#define MLXSW_THERMAL_MAX_STATE 10#define MLXSW_THERMAL_MIN_STATE 2#define MLXSW_THERMAL_MAX_DUTY 255
@@ -96,8 +95,6 @@ struct mlxsw_thermal {u8 tz_module_num;struct mlxsw_thermal_module *tz_gearbox_arr;u8 tz_gearbox_num; -unsigned int tz_highest_score; -struct thermal_zone_device *tz_highest_dev; };static inline u8 mlxsw_state_to_duty (int state)
@@ -186,34 +183,6 @@ mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,return 0 ; } -static void mlxsw_thermal_tz_score_update (struct mlxsw_thermal *thermal, -struct thermal_zone_device *tzdev, -struct mlxsw_thermal_trip *trips, -int temp) -{ -struct mlxsw_thermal_trip *trip = trips; -unsigned int score, delta, i, shift =1 ; - -/* Calculate thermal zone score, if temperature is above the hot -* threshold score is set to MLXSW_THERMAL_TEMP_SCORE_MAX. -*/ - score =MLXSW_THERMAL_TEMP_SCORE_MAX ; -for (i =MLXSW_THERMAL_TEMP_TRIP_NORM ; i <MLXSW_THERMAL_NUM_TRIPS ; - i++, trip++) { -if (temp < trip->temp) { - delta =DIV_ROUND_CLOSEST (temp, trip->temp - temp); - score = delta * shift; -break ; - } - shift *=256 ; - } - -if (score > thermal->tz_highest_score) { - thermal->tz_highest_score = score; - thermal->tz_highest_dev = tzdev; - } -} -static int mlxsw_thermal_bind (struct thermal_zone_device *tzdev,struct thermal_cooling_device *cdev) {
@@ -278,10 +247,8 @@ static int mlxsw_thermal_get_temp(struct thermal_zone_device *tzdev,dev_err (dev,"Failed to query temp sensor\n" );return err; } +mlxsw_reg_mtmp_unpack (mtmp_pl, &temp,NULL ,NULL ,NULL ,NULL ); -if (temp >0 ) -mlxsw_thermal_tz_score_update (thermal, tzdev, thermal->trips, - temp); *p_temp = temp;return 0 ;
@@ -342,22 +309,6 @@ static int mlxsw_thermal_set_trip_hyst(struct thermal_zone_device *tzdev,return 0 ; } -static int mlxsw_thermal_trend_get (struct thermal_zone_device *tzdev, -int trip,enum thermal_trend *trend) -{ -struct mlxsw_thermal_module *tz = tzdev->devdata; -struct mlxsw_thermal *thermal = tz->parent; - -if (trip <0 || trip >=MLXSW_THERMAL_NUM_TRIPS ) -return -EINVAL ; - -if (tzdev == thermal->tz_highest_dev) -return 1 ; - - *trend =THERMAL_TREND_STABLE ; -return 0 ; -} -static struct thermal_zone_params mlxsw_thermal_params = { .no_hwmon = true, };
@@ -371,7 +322,6 @@ static struct thermal_zone_device_ops mlxsw_thermal_ops = { .set_trip_temp = mlxsw_thermal_set_trip_temp, .get_trip_hyst = mlxsw_thermal_get_trip_hyst, .set_trip_hyst = mlxsw_thermal_set_trip_hyst, - .get_trend = mlxsw_thermal_trend_get, }; static int mlxsw_thermal_module_bind(struct thermal_zone_device *tzdev,
@@ -456,7 +406,6 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,int temp, crit_temp, emerg_temp;struct device *dev;u16 sensor_index; -int err; dev = thermal->bus_info->dev; sensor_index =MLXSW_REG_MTMP_MODULE_INDEX_MIN + tz->module;
@@ -471,10 +420,8 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,return 0 ;/* Update trip points. */ - err =mlxsw_thermal_module_trips_update (dev, thermal->core, tz, - crit_temp, emerg_temp); -if (!err && temp >0 ) -mlxsw_thermal_tz_score_update (thermal, tzdev, tz->trips, temp); +mlxsw_thermal_module_trips_update (dev, thermal->core, tz, + crit_temp, emerg_temp);return 0 ; }
@@ -547,7 +494,6 @@ static struct thermal_zone_device_ops mlxsw_thermal_module_ops = { .set_trip_temp = mlxsw_thermal_module_trip_temp_set, .get_trip_hyst = mlxsw_thermal_module_trip_hyst_get, .set_trip_hyst = mlxsw_thermal_module_trip_hyst_set, - .get_trend = mlxsw_thermal_trend_get, }; static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev,
@@ -568,8 +514,6 @@ static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev,return err;mlxsw_reg_mtmp_unpack (mtmp_pl, &temp,NULL ,NULL ,NULL ,NULL ); -if (temp >0 ) -mlxsw_thermal_tz_score_update (thermal, tzdev, tz->trips, temp); *p_temp = temp;return 0 ;
@@ -584,7 +528,6 @@ static struct thermal_zone_device_ops mlxsw_thermal_gearbox_ops = { .set_trip_temp = mlxsw_thermal_module_trip_temp_set, .get_trip_hyst = mlxsw_thermal_module_trip_hyst_get, .set_trip_hyst = mlxsw_thermal_module_trip_hyst_set, - .get_trend = mlxsw_thermal_trend_get, }; static int mlxsw_thermal_get_max_state(struct thermal_cooling_device *cdev,
@@ -667,6 +610,7 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)MLXSW_THERMAL_TRIP_MASK , module_tz, &mlxsw_thermal_module_ops, + &mlxsw_thermal_params,0 , module_tz->parent->polling_delay);
Signature · 1 line
2.34.1
Ido Schimmel
maintainerRe: [PATCH v2 2/2] Revert "mlxsw: core: Add the hottest thermal zone detection"
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c line 24
Quoted 8 lines · Daniel Lezcano
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +0
-0@@ -22,7 +22,6 @@#define MLXSW_THERMAL_HYSTERESIS_TEMP 5000/* 5C */ #define MLXSW_THERMAL_MODULE_TEMP_SHIFT (MLXSW_THERMAL_HYSTERESIS_TEMP * 2)#define MLXSW_THERMAL_ZONE_MAX_NAME 16
Which tree is this patch from? The define is no longer in mainline:
Getting a conflict when trying to apply this patch
Quoted 4 lines
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +0
-1-#define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0)#define MLXSW_THERMAL_MAX_STATE 10#define MLXSW_THERMAL_MIN_STATE 2#define MLXSW_THERMAL_MAX_DUTY 255
Re: [PATCH v2 2/2] Revert "mlxsw: core: Add the hottest thermal zone detection"
Quoted 12 lines · Ido Schimmel
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c line 24
Quoted 8 lines · Daniel Lezcano
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +0
-0@@ -22,7 +22,6 @@#define MLXSW_THERMAL_HYSTERESIS_TEMP 5000/* 5C */ #define MLXSW_THERMAL_MODULE_TEMP_SHIFT (MLXSW_THERMAL_HYSTERESIS_TEMP * 2)#define MLXSW_THERMAL_ZONE_MAX_NAME 16Which tree is this patch from? The define is no longer in mainline:
It applies against:
https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/log/?h=thermal/linux-next
But it is not refreshed against v6.0-rc1
I'll take care of giving a respin of the patch before resending.
Quoted 6 lines
Getting a conflict when trying to apply this patch
Quoted 4 lines
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c +0
-1-#define MLXSW_THERMAL_TEMP_SCORE_MAX GENMASK(31, 0)#define MLXSW_THERMAL_MAX_STATE 10#define MLXSW_THERMAL_MIN_STATE 2#define MLXSW_THERMAL_MAX_DUTY 255
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Ido Schimmel
maintainerQuoted 6 lines · Daniel Lezcano
This reverts commit
2dc2f760052da4925482ecdcdc5c94d4a599153c.As discussed in the thread:
Quoted 8 lines
the feature provided by commits
2dc2f760052daand6f73862fabd93is actually already handled by the thermal framework via the cooling device state aggregation, thus all this code is pointless.No conflict happened when reverting the patch.
Signed-off-by Daniel Lezcano <[email protected]>Tested-by Vadim Pasternak <[email protected]>
Daniel, the intention is to send these patches to mainline as part of your 6.1 pull request?
I discussed it with Vadim yesterday and we do not expect changes in the file during the current cycle so this is OK as far as we are concerned, but I believe this will also need an ack from one of the netdev maintainers.
Thanks
Hi Ido,
Quoted 11 lines · Ido Schimmel
Quoted 10 lines · Daniel Lezcano
This reverts commit
2dc2f760052da4925482ecdcdc5c94d4a599153c.As discussed in the thread:
https://lore.kernel.org/all/[email protected]/
the feature provided by commits
2dc2f760052daand6f73862fabd93is actually already handled by the thermal framework via the cooling device state aggregation, thus all this code is pointless.
Quoted 7 lines
Quoted 4 lines
No conflict happened when reverting the patch.
Signed-off-by Daniel Lezcano <[email protected]>Tested-by Vadim Pasternak <[email protected]>Daniel, the intention is to send these patches to mainline as part of your 6.1 pull request?
Yes, I told Vadim I prefer the change to go through my tree because it is part of a rework of the thermal core internals which impact more drivers.
Quoted 4 lines
I discussed it with Vadim yesterday and we do not expect changes in the file during the current cycle so this is OK as far as we are concerned, but I believe this will also need an ack from one of the netdev maintainers.
Sure.
Dave, Eric,
Is that fine if the changes go through my tree ?
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog