Skip to contentSkip to conversation

5.19.2-rc1 review

PATCH In review Greg Kroah-Hartman 12 participants 1,184 messages Aug 15, 2022 – Aug 21, 2022 Page 1 of 10

Subsystems (12)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.19.2-rc1 review

This is the start of the stable review cycle for the 5.19.2 release. There are 1157 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 17 Aug 2022 18:01:29 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.2-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.19.2-rc1

Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression

Pavel Begunkov <[email protected]>
io_uring: mem-account pbuf buckets

Russell Currey <[email protected]>
powerpc/kexec: Fix build failure from uninitialised variable

Alexander Gordeev <[email protected]>
Revert "s390/smp: enforce lowcore protection on CPU restart"

Vladimir Oltean <[email protected]>
net: dsa: felix: fix min gate len calculation for tc when its first gate is closed

Steven Rostedt (Google) <[email protected]>
tracing: Use a copy of the va_list for __assign_vstr()

Johannes Berg <[email protected]>

    wifi: cfg80211: remove chandef check in cfg80211_cac_event()

Johannes Berg <[email protected]>
wifi: nl80211: acquire wdev mutex earlier in start_ap

Johannes Berg <[email protected]>
wifi: nl80211: relax wdev mutex check in wdev_chandef()

Johannes Berg <[email protected]>
wifi: nl80211: hold wdev mutex for tid config

Johannes Berg <[email protected]>
wifi: cfg80211: handle IBSS in channel switch

Paolo Abeni <[email protected]>
mptcp: refine memory scheduling

Greg Kroah-Hartman <[email protected]>
Revert "devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm"

Greg Kroah-Hartman <[email protected]>
Revert "mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv"

Eric Dumazet <[email protected]>

    raw: fix a typo in raw_icmp_error()

Eric Dumazet <[email protected]>

    raw: remove unused variables from raw6_icmp_error()

Jason A. Donenfeld <[email protected]>
crypto: lib/blake2s - reduce stack frame usage in self test

Eric Dumazet <[email protected]>
tcp: fix over estimation in sk_forced_mem_schedule()

Robert Foss <[email protected]>
Revert "drm/bridge: anx7625: Use DPI bus type"

Thadeu Lima de Souza Cascardo <[email protected]>
net_sched: cls_route: remove from list when handle is 0

Naveen N. Rao <[email protected]>
powerpc64/ftrace: Fix ftrace for clang builds

Christophe Leroy <[email protected]>
powerpc: Fix eh field when calling lwarx on PPC32

SeongJae Park <[email protected]>
xen-blkfront: Apply 'feature_persistent' parameter when connect

Maximilian Heyne <[email protected]>
xen-blkback: Apply 'feature_persistent' parameter when connect

SeongJae Park <[email protected]>
xen-blkback: fix persistent grants negotiation

Mårten Lindahl <[email protected]>
tpm: Add check for Failure mode for TPM2 modules

Huacai Chen <[email protected]>
tpm: eventlog: Fix section mismatch for DEBUG_SECTION_MISMATCH

Tianjia Zhang <[email protected]>
KEYS: asymmetric: enforce SM2 signature use pkey algo

Jan Kara <[email protected]>
ext4: fix race when reusing xattr blocks

Jan Kara <[email protected]>
ext4: unindent codeblock in ext4_xattr_block_set()

Jan Kara <[email protected]>
ext4: remove EA inode entry from mbcache on inode eviction

Lukas Czerner <[email protected]>
ext4: make sure ext4_append() always allocates new block

Lukas Czerner <[email protected]>
ext4: check if directory block is within i_size

Bagas Sanjaya <[email protected]>
Documentation: ext4: fix cell spacing of table heading on blockmap table

Ye Bin <[email protected]>
ext4: fix warning in ext4_iomap_begin as race between bmap and write

Baokun Li <[email protected]>
ext4: correct the misjudgment in ext4_iget_extra_inode

Baokun Li <[email protected]>
ext4: correct max_inline_xattr_value_size computing

Baokun Li <[email protected]>
ext4: fix use-after-free in ext4_xattr_set_entry

Baokun Li <[email protected]>
ext4: add EXT4_INODE_HAS_XATTR_SPACE macro in xattr.h

Eric Whitney <[email protected]>
ext4: fix extent status tree race in writeback error recovery path

Theodore Ts'o <[email protected]>
ext4: update s_overhead_clusters in the superblock during an on-line resize

Zhang Yi <[email protected]>
ext4: fix reading leftover inlined symlinks

Steven Rostedt (Google) <[email protected]>
tracing: Use a struct alignof to determine trace event field alignment

Steven Rostedt (Google) <[email protected]>
batman-adv: tracing: Use the new __vstring() helper

Miaohe Lin <[email protected]>
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat

Jianglei Nie <[email protected]>
mm/damon/reclaim: fix potential memory leak in damon_reclaim_init()

Mike Snitzer <[email protected]>
dm: fix dm-raid crash if md_handle_request() splits bio

Mikulas Patocka <[email protected]>
dm raid: fix address sanitizer warning in raid_resume

Mikulas Patocka <[email protected]>
dm raid: fix address sanitizer warning in raid_status

Sean Christopherson <[email protected]>
KVM: nVMX: Attempt to load PERF_GLOBAL_CTRL on nVMX xfer iff it exists

Sean Christopherson <[email protected]>
KVM: VMX: Add helper to check if the guest PMU has PERF_GLOBAL_CTRL

Sean Christopherson <[email protected]>
Revert "KVM: x86/pmu: Accept 0 for absent PMU MSRs when host-initiated if !enable_pmu"

Like Xu <[email protected]>
KVM: x86/pmu: Accept 0 for absent PMU MSRs when host-initiated if !enable_pmu

Like Xu <[email protected]>

    KVM: x86/pmu: Ignore pmu->global_ctrl check if vPMU doesn't support global_ctrl

Sean Christopherson <[email protected]>
KVM: VMX: Mark all PERF_GLOBAL_(OVF)_CTRL bits reserved if there's no vPMU

Like Xu <[email protected]>
KVM: x86/pmu: Introduce the ctrl_mask value for fixed counter

Sumanth Korikkar <[email protected]>
s390/unwind: fix fgraph return address recovery

Jason A. Donenfeld <[email protected]>
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9

Rafael J. Wysocki <[email protected]>
ACPI: CPPC: Do not prevent CPPC from working in the future

Artem Bityutskiy <[email protected]>
intel_idle: make SPR C1 and C1E be independent

Filipe Manana <[email protected]>
btrfs: join running log transaction when logging new name

Naohiro Aota <[email protected]>
btrfs: zoned: wait until zone is finished when allocation didn't progress

Naohiro Aota <[email protected]>
btrfs: zoned: write out partially allocated region

Naohiro Aota <[email protected]>
btrfs: zoned: activate necessary block group

Naohiro Aota <[email protected]>
btrfs: zoned: activate metadata block group on flush_space

Naohiro Aota <[email protected]>

    btrfs: zoned: introduce space_info->active_total_bytes

Stefan Roesch <[email protected]>
btrfs: store chunk size in space-info struct

Naohiro Aota <[email protected]>
btrfs: zoned: disable metadata overcommit for zoned

Naohiro Aota <[email protected]>
btrfs: zoned: finish least available block group on data bg allocation

Naohiro Aota <[email protected]>
btrfs: let can_allocate_chunk return error

Naohiro Aota <[email protected]>

    btrfs: convert count_max_extents() to use fs_info->max_extent_size

Naohiro Aota <[email protected]>

    btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size

Naohiro Aota <[email protected]>
btrfs: zoned: revive max_zone_append_bytes

Naohiro Aota <[email protected]>
block: add bdev_max_segments() helper

Nikolay Borisov <[email protected]>
btrfs: properly flag filesystem with BTRFS_FEATURE_INCOMPAT_BIG_METADATA

Josef Bacik <[email protected]>
btrfs: reset block group chunk force if we have to wait

Naohiro Aota <[email protected]>
btrfs: fix error handling of fallback uncompress write

Naohiro Aota <[email protected]>
btrfs: ensure pages are unlocked on cow_file_range() failure

Josef Bacik <[email protected]>
btrfs: tree-log: make the return value for log syncing consistent

Jinke Han <[email protected]>
block: don't allow the same type rq_qos add more than once

Chen Zhongjin <[email protected]>
locking/csd_lock: Change csdlock_debug from early_param to __setup

Jason A. Donenfeld <[email protected]>
timekeeping: contribute wall clock to rng on time change

Pali Rohár <[email protected]>
ARM: Marvell: Update PCIe fixup

Tyler Hicks <[email protected]>
net/9p: Initialize the iounit field during fid creation

Luo Meng <[email protected]>
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback

Steven Rostedt (Google) <[email protected]>
tracing/events: Add __vstring() and __assign_vstr() helper macros

Michal Suchanek <[email protected]>
kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification

Coiby Xu <[email protected]>
kexec: clean up arch_kexec_kernel_verify_sig

Naveen N. Rao <[email protected]>
kexec_file: drop weak attribute from functions

Mikulas Patocka <[email protected]>
dm writecache: set a default MAX_WRITEBACK_JOBS

Robert Marko <[email protected]>
PCI: qcom: Power on PHY before IPQ8074 DBI register accesses

Mohamed Khalfella <[email protected]>
PCI/AER: Iterate over error counters instead of error strings

Alexander Lobakin <[email protected]>
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)

Sean Christopherson <[email protected]>
KVM: x86: Signal #GP, not -EPERM, on bad WRMSR(MCi_CTL/STATUS)

Lev Kujawski <[email protected]>
KVM: set_msr_mce: Permit guests to ignore single-bit ECC errors

Alexander Shishkin <[email protected]>
intel_th: pci: Add Raptor Lake-S CPU support

Alexander Shishkin <[email protected]>
intel_th: pci: Add Raptor Lake-S PCH support

Alexander Shishkin <[email protected]>
intel_th: pci: Add Meteor Lake-P support

Sudeep Holla <[email protected]>
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails

Jason A. Donenfeld <[email protected]>
crypto: blake2s - remove shash module

Jitao Shi <[email protected]>
drm/mediatek: Keep dsi as LP00 before dcs cmds transfer

Phil Auld <[email protected]>
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist

Guo Ren <[email protected]>
csky: abiv1: Fixup compile error

David Collins <[email protected]>
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions

Al Viro <[email protected]>
__follow_mount_rcu(): verify that mount_lock remains unchanged

Xie Shaowen <[email protected]>
Input: gscps2 - check return value of ioremap() in gscps2_probe()

Thadeu Lima de Souza Cascardo <[email protected]>
posix-cpu-timers: Cleanup CPU timers before freeing them during exec

Bharath SM <[email protected]>
SMB3: fix lease break timeout when multiple deferred close handles for the same file.

Alexander Lobakin <[email protected]>
x86/olpc: fix 'logical not is only applied to the left hand side'

Masami Hiramatsu (Google) <[email protected]>
x86/kprobes: Update kcb status flag after singlestepping

Steven Rostedt (Google) <[email protected]>
ftrace/x86: Add back ftrace_expected assignment

Kim Phillips <[email protected]>
x86/bugs: Enable STIBP for IBPB mitigated RETBleed

Paulo Alcantara <[email protected]>
cifs: fix lock length calculation

Arun Easi <[email protected]>
scsi: qla2xxx: Fix losing FCP-2 targets during port perturbation tests

Arun Easi <[email protected]>
scsi: qla2xxx: Fix losing target when it reappears during delete

Arun Easi <[email protected]>
scsi: qla2xxx: Fix losing FCP-2 targets on long port disable with I/Os

Quinn Tran <[email protected]>
scsi: qla2xxx: Wind down adapter after PCIe error

Quinn Tran <[email protected]>
scsi: qla2xxx: Fix erroneous mailbox timeout after PCI error injection

Arun Easi <[email protected]>
scsi: qla2xxx: Fix excessive I/O error messages by default

Arun Easi <[email protected]>
scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts

Quinn Tran <[email protected]>
scsi: qla2xxx: Turn off multi-queue for 8G adapters

Arun Easi <[email protected]>
scsi: qla2xxx: Fix discovery issues in FC-AL topology

Quinn Tran <[email protected]>

    scsi: qla2xxx: Fix imbalance vha->vref_count

Steffen Maier <[email protected]>
scsi: zfcp: Fix missing auto port scan and thus missing target ports

Peter Wang <[email protected]>
scsi: ufs: core: Correct ufshcd_shutdown() flow

Zheyu Ma <[email protected]>
video: fbdev: s3fb: Check the size of screen before memset_io()

Zheyu Ma <[email protected]>
video: fbdev: arkfb: Check the size of screen before memset_io()

Zheyu Ma <[email protected]>
video: fbdev: vt8623fb: Check the size of screen before memset_io()

Jaewook Kim <[email protected]>
f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED

Andrea Righi <[email protected]>

    x86/entry: Build thunk_$(BITS) only if CONFIG_PREEMPTION=y

Mel Gorman <[email protected]>
sched/core: Do not requeue task on CPU excluded from cpus_mask

Tianchen Ding <[email protected]>
sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle

Tianchen Ding <[email protected]>
sched: Fix the check of nr_running at queue wakelist

Florian Fainelli <[email protected]>
tools/thermal: Fix possible path truncations

Zheyu Ma <[email protected]>
video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()

Siddh Raman Pant <[email protected]>
x86/numa: Use cpumask_available instead of hardcoded NULL check

Waiman Long <[email protected]>

    sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed

Michael Ellerman <[email protected]>
powerpc/64e: Fix kexec build error

Douglas Anderson <[email protected]>

    tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements

Josh Poimboeuf <[email protected]>
scripts/faddr2line: Fix vmlinux detection on arm64

Arnaldo Carvalho de Melo <[email protected]>
genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO

Michael Ellerman <[email protected]>
powerpc/pci: Fix PHB numbering when using opal-phbid

Chenyi Qiang <[email protected]>
x86/bus_lock: Don't assume the init value of DEBUGCTLMSR.BUS_LOCK_DETECT to be zero

Chen Zhongjin <[email protected]>
kprobes: Forbid probing on trampoline and BPF code areas

Ian Rogers <[email protected]>
perf symbol: Fail to read phdr workaround

Miaoqian Lin <[email protected]>
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address

Miaoqian Lin <[email protected]>
powerpc/xive: Fix refcount leak in xive_get_max_prio

Miaoqian Lin <[email protected]>
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader

Matthew Wilcox (Oracle) <[email protected]>
cifs: Fix memory leak when using fscache

Chao Liu <[email protected]>
f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time

Chao Yu <[email protected]>
f2fs: fix to check inline_data during compressed inode conversion

Chao Yu <[email protected]>
f2fs: fix to invalidate META_MAPPING before DIO write

Kan Liang <[email protected]>
perf stat: Revert "perf stat: Add default hybrid events"

Alexander Gordeev <[email protected]>
s390/smp: enforce lowcore protection on CPU restart

Sherry Sun <[email protected]>
tty: serial: fsl_lpuart: correct the count of break characters

Vijaya Krishna Nivarthi <[email protected]>
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.

Guo Mengqi <[email protected]>
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()

Rashmica Gupta <[email protected]>
selftests/powerpc: Fix matrix multiply assist test

Pali Rohár <[email protected]>
powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias

Alexey Kardashevskiy <[email protected]>
powerpc/iommu: Fix iommu_table_in_use for a small default DMA window case

Alexey Kardashevskiy <[email protected]>
pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window

Christophe Leroy <[email protected]>
video: fbdev: offb: Include missing linux/platform_device.h

Christophe Leroy <[email protected]>
powerpc/32: Do not allow selection of e5500 or e6500 CPUs on PPC32

Christophe Leroy <[email protected]>
powerpc/32s: Fix boot failure with KASAN + SMP + JUMP_LABEL_FEATURE_CHECK_DEBUG

Christophe Leroy <[email protected]>
powerpc/32: Call mmu_mark_initmem_nx() regardless of data block mapping.

Claudiu Beznea <[email protected]>
ASoC: mchp-spdifrx: disable end of block interrupt on failures

Rustam Subkhankulov <[email protected]>
video: fbdev: sis: fix typos in SiS_GetModeID()

Liang He <[email protected]>
video: fbdev: amba-clcd: Fix refcount leak bugs

Yong Zhi <[email protected]>
ASoC: Intel: sof_rt5682: Perform quirk check first in card late probe

William Dean <[email protected]>
watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()

Jean Delvare <[email protected]>
watchdog: sp5100_tco: Fix a memory leak of EFCH MMIO resource

Jiasheng Jiang <[email protected]>
watchdog: f71808e_wdt: Add check for platform_driver_register

Liang He <[email protected]>
ASoC: audio-graph-card2: Add of_node_put() in fail path

Liang He <[email protected]>
ASoC: audio-graph-card: Add of_node_put() in fail path

Xie Yongji <[email protected]>
fuse: Remove the control interface for virtio-fs

Christophe JAILLET <[email protected]>
ASoC: qcom: q6dsp: Fix an off-by-one in q6adm_alloc_copp()

Shengjiu Wang <[email protected]>
ASoC: imx-card: use snd_pcm_format_t type for asrc_format

Shengjiu Wang <[email protected]>
ASoC: fsl_easrc: use snd_pcm_format_t type for sample_format

Shengjiu Wang <[email protected]>
ASoC: fsl-asoc-card: force cast the asrc_format type

Shengjiu Wang <[email protected]>
ASoC: fsl_asrc: force cast the asrc_format type

Thomas Richter <[email protected]>
perf test: Fix test case 83 ('perf stat CSV output linter') on s390

Alexander Gordeev <[email protected]>
s390/zcore: fix race when reading from hardware system area

Alexander Gordeev <[email protected]>
s390/crash: fix incorrect number of bytes to copy to user space

Sunil V L <[email protected]>
riscv: spinwait: Fix hartid variable type

Adrian Hunter <[email protected]>
perf tools: Fix dso_id inode generation comparison

Liang He <[email protected]>
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop

Mario Limonciello <[email protected]>
ASoC: amd: yc: Decrease level of error message

Miaoqian Lin <[email protected]>
mfd: max77620: Fix refcount leak in max77620_initialise_fps

Uwe Kleine-König <[email protected]>
mfd: t7l66xb: Drop platform disable callback

Sibi Sankar <[email protected]>
remoteproc: sysmon: Wait for SSCTL service to come up

Siddharth Gupta <[email protected]>
remoteproc: qcom: pas: Check if coredump is enabled

Zhihao Cheng <[email protected]>
proc: fix a dentry lock race between release_task and lookup

Tetsuo Handa <[email protected]>
lib/smp_processor_id: fix imbalanced instrumentation_end() call

Dan Carpenter <[email protected]>
kfifo: fix kfifo_to_user() return type

Emil Renner Berthing <[email protected]>
leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors

Miaoqian Lin <[email protected]>
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge

Florian Fainelli <[email protected]>
MIPS: Fixed __debug_virt_addr_valid()

Hangyu Hua <[email protected]>
net: 9p: fix refcount leak in p9_read_work() error handling

Kent Overstreet <[email protected]>
9p: Add client parameter to p9_req_put()

Kent Overstreet <[email protected]>
9p: Drop kref usage

Sam Protsenko <[email protected]>
iommu/exynos: Handle failed IOMMU device registration properly

Doug Berger <[email protected]>
serial: 8250_bcm7271: Save/restore RTS in suspend/resume

Dan Carpenter <[email protected]>
ASoC: SOF: ipc-msg-injector: fix copy in sof_msg_inject_ipc4_dfs_write()

Liang He <[email protected]>
ASoC: mt6359: Fix refcount leak bug

Liang He <[email protected]>
ASoc: audio-graph-card2: Fix refcount leak bug in __graph_get_type()

Yang Yingliang <[email protected]>
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()

Peter Ujfalusi <[email protected]>
ASoC: SOF: ipc3-topology: Prevent double freeing of ipc_control_data via load_bytes

Alexander Lobakin <[email protected]>
lib/bitmap: fix off-by-one in bitmap_to_arr64()

Robin Murphy <[email protected]>
swiotlb: fail map correctly with failed io_tlb_default_mem

YC Hung <[email protected]>
ASoC: SOF: mediatek: fix mt8195 StatvectorSel wrong setting

Florian Fainelli <[email protected]>
MIPS: vdso: Utilize __pa() for gic_pfn

Daniel Starke <[email protected]>
tty: n_gsm: fix missing corner cases in gsmld_poll()

Daniel Starke <[email protected]>
tty: n_gsm: fix flow control handling in tx path

Daniel Starke <[email protected]>
tty: n_gsm: fix DM command

Daniel Starke <[email protected]>
tty: n_gsm: fix wrong T1 retry count handling

Uwe Kleine-König <[email protected]>
serial: 8250_fsl: Don't report FE, PE and OE twice

Kuninori Morimoto <[email protected]>
ASoC: audio-graph-card2.c: use of_property_read_u32() for rate

Eric Farman <[email protected]>
vfio/ccw: Do not change FSM state in subchannel event

Eric Farman <[email protected]>
vfio/ccw: Fix FSM state if mdev probe fails

Michael Kawano <[email protected]>
vfio/ccw: Remove UUID from s390 debug log

Sireesh Kodali <[email protected]>
remoteproc: qcom: wcnss: Fix handling of IRQs

Shengjiu Wang <[email protected]>
ASoC: imx-card: Fix DSD/PDM mclk frequency

Tiezhu Yang <[email protected]>
MIPS: Loongson64: Fix section mismatch warning

Liang He <[email protected]>
ASoC: qcom: Fix missing of_node_put() in asoc_qcom_lpass_cpu_platform_probe()

Daniel Starke <[email protected]>
tty: n_gsm: fix resource allocation order in gsm_activate_mux()

Daniel Starke <[email protected]>
tty: n_gsm: fix deadlock and link starvation in outgoing data path

Daniel Starke <[email protected]>
tty: n_gsm: fix race condition in gsmld_write()

Daniel Starke <[email protected]>
tty: n_gsm: fix packet re-transmission without open control channel

Daniel Starke <[email protected]>
tty: n_gsm: fix non flow control frames during mux flow off

Daniel Starke <[email protected]>
tty: n_gsm: fix missing timer to handle stalled links

Daniel Starke <[email protected]>
tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output()

Daniel Starke <[email protected]>
tty: n_gsm: fix tty registration before control channel open

Daniel Starke <[email protected]>
tty: n_gsm: fix user open not possible at responder until initiator open

Alexander Lobakin <[email protected]>
net/ice: fix initializing the bitmap in the switch code

Yishai Hadas <[email protected]>
vfio: Split migration ops from main device ops

Yishai Hadas <[email protected]>
vfio/mlx5: Protect mlx5vf_disable_fds() upon close device

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wsa881x: handle timeouts in resume path

Ilpo Järvinen <[email protected]>
serial: 8250_dw: Take port lock while accessing LSR

Tom Rix <[email protected]>
ASoC: samsung: change gpiod_speaker_power and rx1950_audio from global to static variables

Kuninori Morimoto <[email protected]>
ASoC: soc-core.c: fixup snd_soc_of_get_dai_link_cpus()

Athira Rajeev <[email protected]>
powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable

Krzysztof Kozlowski <[email protected]>
ASoC: samsung: h1940_uda1380: include proepr GPIO consumer header

Michael Ellerman <[email protected]>
selftests/powerpc: Skip energy_scale_info test on older firmware

Hangyu Hua <[email protected]>
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()

Alexey Kardashevskiy <[email protected]>
KVM: PPC: Book3s: Fix warning about xics_rm_h_xirr_x

Miaoqian Lin <[email protected]>
remoteproc: imx_rproc: Fix refcount leak in imx_rproc_addr_init

Chen Zhongjin <[email protected]>
profiling: fix shift too large makes kernel panic

Joe Lawrence <[email protected]>
selftests/livepatch: better synchronize test_klp_callbacks_busy

Miaoqian Lin <[email protected]>
remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_init

AngeloGioacchino Del Regno <[email protected]>
rpmsg: mtk_rpmsg: Fix circular locking dependency

Shengjiu Wang <[email protected]>
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()

Charles Keepax <[email protected]>
ASoC: cs35l45: Add endianness flag in snd_soc_component_driver

Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd9335: move gains from SX_TLV to S8_TLV

Srinivas Kandagatla <[email protected]>
ASoC: codecs: msm8916-wcd-digital: move gains from SX_TLV to S8_TLV

Peter Ujfalusi <[email protected]>
ASoC: SOF: make ctx_store and ctx_restore as optional

Ilpo Järvinen <[email protected]>
serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty()

Ilpo Järvinen <[email protected]>

    serial: 8250_dw: Use serial_lsr_in() in dw8250_handle_irq()

Ilpo Järvinen <[email protected]>
serial: 8250: Get preserved flags using serial_lsr_in()

Ilpo Järvinen <[email protected]>

    serial: 8250: Create serial_lsr_in()

Yang Yingliang <[email protected]>
serial: pic32: fix missing clk_disable_unprepare() on error in pic32_uart_startup()

Miaoqian Lin <[email protected]>

    ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe

Jiasheng Jiang <[email protected]>
ASoC: codecs: da7210: add check for i2c_add_driver

Miaoqian Lin <[email protected]>

    ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe

Randy Dunlap <[email protected]>
ASoC: max98390: use linux/gpio/consumer.h to fix build

Miaoqian Lin <[email protected]>

    ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe

Fabio Estevam <[email protected]>
ASoC: imx-audmux: Silence a clang warning

Miaoqian Lin <[email protected]>
ASoC: samsung: Fix error handling in aries_audio_probe

Miaoqian Lin <[email protected]>
ASoC: cros_ec_codec: Fix refcount leak in cros_ec_codec_platform_probe

Tang Bin <[email protected]>
opp: Fix error check in dev_pm_opp_attach_genpd()

Nathan Chancellor <[email protected]>
usb: cdns3: Don't use priv_dev uninitialized in cdns3_gadget_ep_enable()

Zhihao Cheng <[email protected]>

    jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted

Li Lingfeng <[email protected]>
ext4: recover csum seed of tmp_inode after migrating to extents

Zhang Yi <[email protected]>
jbd2: fix outstanding credits assert in jbd2_journal_commit_transaction()

Keith Busch <[email protected]>
block: ensure iov_iter advances for added pages

Keith Busch <[email protected]>
block/bio: remove duplicate append pages code

Christoph Hellwig <[email protected]>
nvme: catch -ENODEV from nvme_revalidate_zones again

Nick Bowler <[email protected]>
nvme: define compat_ioctl again to unbreak 32-bit userspace.

Bean Huo <[email protected]>

    nvme: use command_id instead of req->tag in trace_nvme_complete_rq()

Christoph Hellwig <[email protected]>
mtip32xx: fix device removal

Yu Kuai <[email protected]>
nbd: add missing definition of pr_fmt

Dan Carpenter <[email protected]>
null_blk: fix ida error handling in null_add_dev()

Md Haris Iqbal <[email protected]>
block/rnbd-srv: Set keep_id to true after mutex_trylock

Zhu Yanjun <[email protected]>
RDMA/rxe: Fix error unwind in rxe_create_qp()

Maor Gottlieb <[email protected]>
RDMA/mlx5: Add missing check for return value in get namespace flow

Xu Qiang <[email protected]>
of/fdt: declared return type does not match actual return type

Andrei Vagin <[email protected]>
selftests: kvm: set rax before vmcall

Juergen Gross <[email protected]>
xen: don't require virtio with grants for non-PV guests

Juergen Gross <[email protected]>
virtio: replace restricted mem access flag with callback

Andreas Schwab <[email protected]>
rtla: Fix double free

Daniel Bristot de Oliveira <[email protected]>
rtla: Fix Makefile when called from -C tools/

Dan Carpenter <[email protected]>
selftest/vm: uninitialized variable in main()

Dan Carpenter <[email protected]>
tools/testing/selftests/vm/hugetlb-madvise.c: silence uninitialized variable warning

Adam Sindelar <[email protected]>
selftests/vm: fix errno handling in mrelease_test

Miaohe Lin <[email protected]>
mm/mmap.c: fix missing call to vm_unacct_memory in mmap_region

Liam R. Howlett <[email protected]>
android: binder: stop saving a pointer to the VMA

Bart Van Assche <[email protected]>
RDMA/srpt: Fix a use-after-free

Bart Van Assche <[email protected]>
RDMA/srpt: Introduce a reference count in struct srpt_device

Bart Van Assche <[email protected]>
RDMA/srpt: Duplicate port name members

Dan Carpenter <[email protected]>
platform/olpc: Fix uninitialized data in debugfs write

Vadim Pasternak <[email protected]>
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity

Hans de Goede <[email protected]>
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table

Dan Carpenter <[email protected]>
tools/power/x86/intel-speed-select: Fix off by one check

Sean Christopherson <[email protected]>
KVM: nVMX: Set UMIP bit CR4_FIXED1 MSR when emulating UMIP

Peter Suti <[email protected]>
staging: fbtft: core: set smem_len before fb_deferred_io_init call

Patrice Chotard <[email protected]>
mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()

Andrey Strachuk <[email protected]>
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()

Alexey Sheplyakov <[email protected]>
usb: xhci_plat_remove: avoid NULL dereference

Johan Hovold <[email protected]>
USB: serial: fix tty-port initialized comments

Basavaraj Natikar <[email protected]>
HID: amd_sfh: Handle condition of "no sensors"

Vidya Sagar <[email protected]>
PCI: tegra194: Fix link up retry sequence

Vidya Sagar <[email protected]>
PCI: tegra194: Fix Root Port interrupt handling

Bob Pearson <[email protected]>
RDMA/rxe: Fix rnr retry behavior

Md Haris Iqbal <[email protected]>
RDMA/rxe: For invalidate compare according to set keys in mr

Artem Borisov <[email protected]>
HID: alps: Declare U1_UNICORN_LEGACY support

Liang He <[email protected]>
mmc: cavium-thunderx: Add of_node_put() when breaking out of loop

Liang He <[email protected]>
mmc: cavium-octeon: Add of_node_put() when breaking out of loop

Liang He <[email protected]>
mmc: core: quirks: Add of_node_put() when breaking out of loop

Bob Pearson <[email protected]>
RDMA/rxe: Fix mw bind to allow any consumer key portion

Antonio Borneo <[email protected]>
scripts/gdb: fix 'lx-dmesg' on 32 bits arch

Fabio Estevam <[email protected]>
dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)

Basavaraj Natikar <[email protected]>
HID: amd_sfh: Add NULL check for hid device

Harshit Mogalapalli <[email protected]>
HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()

Dan Carpenter <[email protected]>
iio: adc: max1027: unlock on error path in max1027_read_single_value()

Liang He <[email protected]>
gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()

Jianglei Nie <[email protected]>
RDMA/hfi1: fix potential memory leak in setup_base_ctxt()

Bryan O'Donoghue <[email protected]>
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk

Bjorn Andersson <[email protected]>
clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled

Abel Vesa <[email protected]>
clk: qcom: Drop mmcx gdsc supply for dispcc and videocc

Gwendal Grignou <[email protected]>
iio: cros: Register FIFO callback after sensor is registered

Zhu Yanjun <[email protected]>
RDMA/rxe: Fix BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup

Cheng Xu <[email protected]>
RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event

Haoyue Xu <[email protected]>
RDMA/hns: Fix incorrect clearing of interrupt status register

Jianglei Nie <[email protected]>
RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr()

Md Haris Iqbal <[email protected]>
RDMA/rtrs-clt: Replace list_next_or_null_rr_rcu with an inline function

Jack Wang <[email protected]>
RDMA/rtrs-srv: Fix modinfo output for stringify

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix setting of QP context err_rq_idx_valid field

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix VLAN connection with wildcard address

Mustafa Ismail <[email protected]>
RDMA/irdma: Fix a window for use-after-free

Patrick Wang <[email protected]>
mm: percpu: use kmemleak_ignore_phys() instead of kmemleak_free()

Christopher Obbard <[email protected]>
um: random: Don't initialise hwrng struct with zero

Kalesh Singh <[email protected]>
KVM: arm64: Fix hypervisor address symbolization

Peng Fan <[email protected]>
interconnect: imx: fix max_node_id

Samuel Holland <[email protected]>
phy: rockchip-inno-usb2: Ignore OTG IRQs in host mode

Fabrice Gasnier <[email protected]>
phy: stm32: fix error return in stm32_usbphyc_phy_init

Dan Carpenter <[email protected]>
eeprom: idt_89hpesx: uninitialized data in idt_dbgfs_csr_write()

Johan Hovold <[email protected]>
usb: dwc3: qcom: fix missing optional irq warnings

Rohith Kollalsi <[email protected]>
usb: dwc3: core: Do not perform GCTL_CORE_SOFTRESET during bootup

Thinh Nguyen <[email protected]>
usb: dwc3: core: Deprecate GCTL.CORESOFTRESET

Liang He <[email protected]>
usb: aspeed-vhub: Fix refcount leak bug in ast_vhub_init_desc()

Randy Dunlap <[email protected]>
usb: gadget: udc: amd5536 depends on HAS_DMA

Yang Yingliang <[email protected]>
xtensa: iss: fix handling error cases in iss_net_configure()

Max Filippov <[email protected]>
xtensa: iss/network: provide release() callback

Mahesh Rajashekhara <[email protected]>
scsi: smartpqi: Fix DMA direction for RAID requests

Christian Marangi <[email protected]>
PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks

Stefan Roese <[email protected]>
PCI/portdrv: Don't disable AER reporting in get_port_device_capability()

Claudio Imbrenda <[email protected]>
KVM: s390: pv: leak the topmost page table when destroy fails

Christian Loehle <[email protected]>
mmc: block: Add single read for 4k sector cards

Liang He <[email protected]>
of: device: Fix missing of_node_put() in of_dma_set_restricted_buffer

Eugen Hristev <[email protected]>
mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R

Christophe JAILLET <[email protected]>
memstick/ms_block: Fix a memory leak

Christophe JAILLET <[email protected]>
memstick/ms_block: Fix some incorrect memory allocation

Lad Prabhakar <[email protected]>
mmc: renesas_sdhi: Get the reset handle early in the probe

Fabio Estevam <[email protected]>
mmc: mxcmmc: Silence a clang warning

Miaoqian Lin <[email protected]>
mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switch

Bhupesh Sharma <[email protected]>
dt-bindings: mmc: sdhci-msm: Fix issues in yaml bindings

Dan Carpenter <[email protected]>
habanalabs: fix double unlock on error in map_device_va()

jianchunfu <[email protected]>
rtla/utils: Use calloc and check the potential memory allocation failure

Duoming Zhou <[email protected]>
staging: rtl8192u: Fix sleep in atomic context bug in dm_fsync_timer_callback

Carlos Llamas <[email protected]>
binder: fix redefinition of seq_file attributes

Alexander Shishkin <[email protected]>
intel_th: msu: Fix vmalloced buffers

Jiasheng Jiang <[email protected]>
intel_th: msu-sink: Potential dereference of null pointer

Christophe JAILLET <[email protected]>
intel_th: Fix a resource leak in an error handling path

James Smart <[email protected]>
scsi: lpfc: Revert RSCN_MEMENTO workaround for misbehaved configuration

Bart Van Assche <[email protected]>
scsi: sd: Rework asynchronous resume support

Dan Carpenter <[email protected]>
scsi: qla2xxx: Check correct variable in qla24xx_async_gffid()

Dmitry Baryshkov <[email protected]>
phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE register

Shunsuke Mie <[email protected]>
PCI: endpoint: Don't stop controller when unbinding endpoint function

Viacheslav Mitrofanov <[email protected]>
dmaengine: sf-pdma: Add multithread support for a DMA channel

Quentin Perret <[email protected]>
KVM: arm64: Don't return from void function

Pierre-Louis Bossart <[email protected]>
soundwire: revisit driver bind/unbind and callbacks

Pierre-Louis Bossart <[email protected]>
soundwire: bus_type: fix remove and shutdown support

Serge Semin <[email protected]>
PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists

Serge Semin <[email protected]>
PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors

Serge Semin <[email protected]>
PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address

Serge Semin <[email protected]>
PCI: dwc: Disable outbound windows only for controllers using iATU

Serge Semin <[email protected]>
PCI: dwc: Add unroll iATU space support to dw_pcie_disable_atu()

Serge Semin <[email protected]>
PCI: dwc: Stop link on host_init errors and de-initialization

Peter Geis <[email protected]>
phy: rockchip-inno-usb2: Sync initial otg state

Andy Shevchenko <[email protected]>
phy: ti: tusb1210: Don't check for write errors when powering on

Tianyu Li <[email protected]>
mm/mempolicy: fix get_nodes out of bound access

Andrey Konovalov <[email protected]>
kasan: fix zeroing vmalloc memory with HW_TAGS

Miaohe Lin <[email protected]>
mm/migration: fix potential pte_unmap on an not mapped pte

Miaohe Lin <[email protected]>
mm/migration: return errno when isolate_huge_page failed

Yang Shi <[email protected]>
mm: rmap: use the correct parameter name for DEFINE_PAGE_VMA_WALK

Yushan Zhou <[email protected]>
kernfs: fix potential NULL dereference in __kernfs_remove

Nikita Travkin <[email protected]>
clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register

Nikita Travkin <[email protected]>
clk: qcom: clk-rcg2: Fail Duty-Cycle configuration if MND divider is not enabled.

Vladimir Zapolskiy <[email protected]>
clk: qcom: camcc-sm8250: Fix topology around titan_top power domain

Vladimir Zapolskiy <[email protected]>
clk: qcom: camcc-sdm845: Fix topology around titan_top power domain

Robert Marko <[email protected]>
clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocks

Robert Marko <[email protected]>
clk: qcom: ipq8074: fix NSS port frequency tables

Robert Marko <[email protected]>
clk: qcom: ipq8074: SW workaround for UBI32 PLL lock

Robert Marko <[email protected]>
clk: qcom: ipq8074: fix NSS core PLL-s

Bob Pearson <[email protected]>
RDMA/rxe: Fix deadlock in rxe_do_local_ops()

Bob Pearson <[email protected]>
RDMA/rxe: Add a responder state for atomic reply

Sergey Shtylyov <[email protected]>
usb: host: xhci: use snprintf() in xhci_decode_trb()

Bryan O'Donoghue <[email protected]>
clk: qcom: gcc-msm8939: Point MM peripherals to system_mm_noc clock

Bryan O'Donoghue <[email protected]>
clk: qcom: gcc-msm8939: Add missing system_mm_noc_bfdcd_clk_src

Bryan O'Donoghue <[email protected]>
clk: qcom: gcc-msm8939: Fix bimc_ddr_clk_src rcgr base address

Bryan O'Donoghue <[email protected]>
clk: qcom: gcc-msm8939: Add missing SYSTEM_MM_NOC_BFDCD_CLK_SRC

Neal Liu <[email protected]>
usb: gadget: f_mass_storage: Make CD-ROM emulation works with Windows OS

Mike Leach <[email protected]>
coresight: syscfg: Update load and unload operations

Mike Leach <[email protected]>
coresight: configfs: Fix unload of configurations on module exit

Christian Marangi <[email protected]>
clk: qcom: clk-krait: unlock spin after mux completion

Zhang Wensheng <[email protected]>
driver core: fix potential deadlock in __driver_attach

Christophe JAILLET <[email protected]>
misc: rtsx: Fix an error handling path in rtsx_pci_probe()

Vladimir Zapolskiy <[email protected]>
clk: qcom: camcc-sm8250: Fix halt on boot by reducing driver's init level

Mark Brown <[email protected]>
mtd: dataflash: Add SPI ID table

Geert Uytterhoeven <[email protected]>
mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path

Ben Gardon <[email protected]>
KVM: x86: Fix errant brace in KVM capability handling

Serge Semin <[email protected]>
dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics

Mike Christie <[email protected]>
scsi: iscsi: Fix session removal on shutdown

Mike Christie <[email protected]>
scsi: iscsi: Add helper to remove a session from the kernel

Mike Christie <[email protected]>
scsi: iscsi: Allow iscsi_if_stop_conn() to be called from kernel

Duoming Zhou <[email protected]>
mwifiex: fix sleep in atomic context bugs caused by dev_coredumpv

Duoming Zhou <[email protected]>
devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm

Sean Christopherson <[email protected]>
KVM: selftests: Use vm_create_with_vcpus() in max_guest_memory_test

Sean Christopherson <[email protected]>

    KVM: selftests: Convert s390x/diag318_test_handler away from VCPU_ID

Sean Christopherson <[email protected]>
KVM: Don't set Accessed/Dirty bits for ZERO_PAGE

Miaohe Lin <[email protected]>
mm/memremap: fix memunmap_pages() race with get_dev_pagemap()

Miaohe Lin <[email protected]>
lib/test_hmm: avoid accessing uninitialized pages

Dongliang Mu <[email protected]>
RDMA/rxe: fix xa_alloc_cycle() error return value check again

Peng Fan <[email protected]>
clk: imx: clk-fracn-gppll: correct rdiv

Liu Ying <[email protected]>

    clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate()

Peng Fan <[email protected]>
clk: imx: clk-fracn-gppll: fix mfd value

Peng Fan <[email protected]>
clk: imx93: correct nic_media parent

Haibo Chen <[email protected]>
clk: imx93: use adc_root as the parent clock of adc1

Rex-BC Chen <[email protected]>
clk: mediatek: reset: Fix written reset bit offset

Jonathan Cameron <[email protected]>
iio: temp: maxim_thermocouple: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: temp: max31865: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: temp: ltc2983: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: resolver: ad2s90: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: resolver: ad2s1200: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: proximity: as3935: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: potentiometer: mcp4131: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: potentiometer: mcp41010: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: potentiometer: max5481: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: potentiometer: ad5272: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: potentiometer: ad5110: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: imu: mpu6050: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: imu: inv_icm42600: Fix alignment for DMA safety in buffer code.

Jonathan Cameron <[email protected]>
iio: imu: inv_icm42600: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: imu: fxos8700: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: gyro: fxas210002c: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: gyro: adxrs450: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: gyro: adis16130: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: gyro: adis16080: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: adrf6780: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: admv4420: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: admv1014: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: admv1013: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: adf4371: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: adf4350: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: frequency: ad9523: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ti-dac7612: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ti-dac7311: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ti-dac5571: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ti-dac082s085: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: mcp4922: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ltc2688: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad8801: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad7303: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad7293: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5791: Fix alignment for DMA saftey

Jonathan Cameron <[email protected]>
iio: dac: ad5770r: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5766: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5764: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5761: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5755: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5686: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5592r: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5504: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5449: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5421: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5360: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: dac: ad5064: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: common: ssp: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: amplifiers: ad8366: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: addac: ad74413r: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-tlc4541: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-ads8688: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-ads8344: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-ads7950: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-ads131e08: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-ads124s08: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-adc161s626: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-adc128s052: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-adc12138: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-adc108s102: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-adc084s021: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ti-adc0832: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>

    iio: adc: mcp320x: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: max1241: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: max1118: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: max11100: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: max1027: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ltc2497: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ltc2496: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: hi8435: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7949: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7923: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7887: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7768-1: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7766: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7606: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7476: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7298: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7292: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7280a: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: adc: ad7266: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: accel: sca3300: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: accel: sca3000: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: accel: bma220: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: accel: adxl367: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: accel: adxl355: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: accel: adxl313: Fix alignment for DMA safety

Jonathan Cameron <[email protected]>
iio: core: Fix IIO_ALIGN and rename as it was not sufficiently large

Jagath Jog J <[email protected]>
iio: accel: bma400: Add triggered buffer support

Jagath Jog J <[email protected]>
iio: accel: bma400: conversion to device-managed function

Jagath Jog J <[email protected]>
iio: accel: bma400: Reordering of header files

Gwendal Grignou <[email protected]>
iio: sx9324: Fix register field spelling

Stephen Boyd <[email protected]>
platform/chrome: cros_ec: Always expose last resume result

Jagath Jog J <[email protected]>
iio: accel: bma400: Fix the scale min and max macro values

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Reduce N2N thrashing at app_start time

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix no logout on delete for N2N

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix session thrash

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Tear down session if keys have been removed

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix no login after app start

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Reduce disruption due to multiple app start

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Send LOGO for unexpected IKE message

Thomas Gleixner <[email protected]>
netfilter: xtables: Bring SPDX identifier back

Miquel Raynal <[email protected]>
dmaengine: dw: dmamux: Fix build without CONFIG_OF

Miquel Raynal <[email protected]>
dmaengine: dw: dmamux: Export the module device table

Tang Bin <[email protected]>
usb: xhci: tegra: Fix error check

Clément Léger <[email protected]>
usb: host: ohci-at91: add support to enter suspend using SMC

Dan Carpenter <[email protected]>
usbip: vudc: Don't enable IRQs prematurely

Tang Bin <[email protected]>
usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()

Miaoqian Lin <[email protected]>
usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe

Laurent Pinchart <[email protected]>
usb: gadget: uvc: Fix comment blocks style

Frank Li <[email protected]>
usb: cdns3: fix random warning message when driver load

Miaoqian Lin <[email protected]>
usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe

Marco Pagani <[email protected]>
fpga: altera-pr-ip: fix unsigned comparison with less than zero

Miaoqian Lin <[email protected]>
PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()

Uwe Kleine-König <[email protected]>
mtd: st_spi_fsm: Disable clock only after device was unregistered

Uwe Kleine-König <[email protected]>
mtd: st_spi_fsm: Warn about failure to unregister mtd device

Uwe Kleine-König <[email protected]>
mtd: spear_smi: Drop if with an always false condition

Uwe Kleine-König <[email protected]>
mtd: st_spi_fsm: Add a clk_disable_unprepare() in .probe()'s error path

Uwe Kleine-König <[email protected]>
mtd: spear_smi: Don't skip cleanup after mtd_device_unregister() failed

Miaoqian Lin <[email protected]>
mtd: parsers: ofpart: Fix refcount leak in bcm4908_partitions_fw_offset

Miaoqian Lin <[email protected]>
mtd: partitions: Fix refcount leak in parse_redboot_of

Duoming Zhou <[email protected]>
mtd: sm_ftl: Fix deadlock caused by cancel_work_sync in sm_release

Harshit Mogalapalli <[email protected]>
HID: cp2112: prevent a buffer overflow in cp2112_xfer()

Miaoqian Lin <[email protected]>
PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep()

Miaoqian Lin <[email protected]>
PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains()

Chanho Park <[email protected]>
phy: samsung: exynosautov9-ufs: correct TSRV register configurations

Sean Christopherson <[email protected]>
KVM: x86/mmu: Drop RWX=0 SPTEs during ept_sync_page()

Sean Christopherson <[email protected]>
KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported

Sean Christopherson <[email protected]>
KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix n2n login retry for secure device

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix n2n discovery issue with secure target

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Add retry for ELS passthrough

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Synchronize NPIV deletion with authentication application

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Fix potential stuck session in sa update

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Add bsg interface to read doorbell events

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Wait for app to ack on sess down

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: bsg refactor

Quinn Tran <[email protected]>
scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashing

Vaibhav Jain <[email protected]>
of: check previous kernel's ima-kexec-buffer against memory bounds

Biju Das <[email protected]>
clk: renesas: rzg2l: Fix reset status function

Christophe JAILLET <[email protected]>
mtd: rawnand: meson: Fix a potential double free issue

Miaoqian Lin <[email protected]>
mtd: maps: Fix refcount leak in ap_flash_init

Miaoqian Lin <[email protected]>
mtd: maps: Fix refcount leak in of_flash_probe_versatile

Ralph Siemsen <[email protected]>
clk: renesas: r9a06g032: Fix UART clkgrp bitsel

Mario Limonciello <[email protected]>
HID: amd_sfh: Don't show client init failed as error when discovery fails

Jason A. Donenfeld <[email protected]>
wireguard: allowedips: don't corrupt stack when detecting overflow

Jason A. Donenfeld <[email protected]>
wireguard: ratelimiter: use hrtimer in selftest

Maxim Mikityanskiy <[email protected]>
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ

Maciej Żenczykowski <[email protected]>
net: usb: make USB_RTL8153_ECM non user configurable

Hangyu Hua <[email protected]>
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock

Jian Shen <[email protected]>
net: ionic: fix error check for vlan flags in ionic_set_nic_features()

Jian Shen <[email protected]>
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()

Eric Dumazet <[email protected]>
net: rose: fix netdev reference changes

Jakub Kicinski <[email protected]>
netdevsim: Avoid allocation warnings triggered from user space

Przemyslaw Patynowski <[email protected]>
iavf: Fix 'tc qdisc show' listing too many queues

Przemyslaw Patynowski <[email protected]>
iavf: Fix max_rate limiting

William Dean <[email protected]>
wifi: rtw88: check the return value of alloc_workqueue()

Ido Schimmel <[email protected]>
netdevsim: fib: Fix reference count leak on route deletion failure

Mike Manning <[email protected]>
net: allow unbound socket for packets in VRF when tcp_l3mdev_accept set

Kai Ye <[email protected]>
crypto: hisilicon/sec - fix auth key size error

Pali Rohár <[email protected]>
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of

Zhengchao Shao <[email protected]>
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq

Eric Dumazet <[email protected]>
ax25: fix incorrect dev_tracker usage

Shay Drory <[email protected]>
net/mlx5: Fix driver use of uninitialized timeout

Yevgeny Kliteynik <[email protected]>
net/mlx5: DR, Fix SMFS steering info dump format

Maher Sanalla <[email protected]>
net/mlx5: Adjust log_max_qp to be 18 at most

Vlad Buslov <[email protected]>
net/mlx5e: Modify slow path rules to go to slow fdb

Maxim Mikityanskiy <[email protected]>
net/mlx5e: Fix calculations related to max MPWQE size

Maxim Mikityanskiy <[email protected]>
net/mlx5e: xsk: Account for XSK RQ UMRs when calculating ICOSQ size

Maxim Mikityanskiy <[email protected]>
net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS

Maor Dickman <[email protected]>
net/mlx5e: TC, Fix post_act to not match on in_port metadata

Gal Pressman <[email protected]>
net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version

Dan Carpenter <[email protected]>
drm/amd/display: fix signedness bug in execute_synaptics_rc_command()

Ezequiel Garcia <[email protected]>
hantro: Remove incorrect HEVC SPS validation

Jernej Skrabec <[email protected]>
media: cedrus: hevc: Add check for invalid timestamp

Hangyu Hua <[email protected]>
wifi: libertas: Fix possible refcount leak in if_usb_probe()

Jose Ignacio Tornos Martinez <[email protected]>
wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue

Ammar Faizi <[email protected]>
wifi: wil6210: debugfs: fix uninitialized variable use in wil_write_file_wmi()

Manikanta Pubbisetty <[email protected]>
wifi: ath11k: Fix register write failure on QCN9074

Liang He <[email protected]>
i2c: mux-gpmux: Add of_node_put() when breaking out of loop

Joanne Koong <[email protected]>
bpf: Fix bpf_xdp_pointer return pointer

Paul Chaignon <[email protected]>
bpf: Set flow flag to allow any source IP in bpf_tunnel_key

Paul Chaignon <[email protected]>
ip_tunnels: Add new flow flags field to ip_tunnel_key

Qu Wenruo <[email protected]>
btrfs: update stripe_sectors::uptodate in steal_rbio

Bjorn Andersson <[email protected]>
i2c: qcom-geni: Use the correct return value

Lars-Peter Clausen <[email protected]>
i2c: cadence: Support PEC for SMBus block read

Ying Hsu <[email protected]>
Bluetooth: Add default wakeup callback for HCI UART driver

Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_sync: Fix not updating privacy_mode

Zhengping Jiang <[email protected]>
Bluetooth: hci_sync: Fix resuming scan after suspend resume

Zhengping Jiang <[email protected]>
Bluetooth: mgmt: Fix refresh cached connection info

Schspa Shi <[email protected]>
Bluetooth: When HCI work queue is drained, only queue chained work

Jiasheng Jiang <[email protected]>
Bluetooth: hci_intel: Add check for platform_driver_register

Vincent Mailhol <[email protected]>
can: pch_can: pch_can_error(): initialize errc before using it

Dan Carpenter <[email protected]>
libbpf: Fix str_has_sfx()'s return value

Vincent Mailhol <[email protected]>
can: error: specify the values of data[5..7] of CAN error frames

Vincent Mailhol <[email protected]>
can: usb_8dev: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: sun4i_can: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: hi311x: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: sja1000: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: rcar_can: do not report txerr and rxerr during bus-off

Vincent Mailhol <[email protected]>
can: pch_can: do not report txerr and rxerr during bus-off

Dan Carpenter <[email protected]>
libbpf: fix an snprintf() overflow check

Dan Carpenter <[email protected]>
selftests/bpf: fix a test for snprintf() overflow

Andrii Nakryiko <[email protected]>
libbpf: make RINGBUF map size adjustments more eagerly

Andrii Nakryiko <[email protected]>
bpf: fix potential 32-bit overflow when accessing ARRAY map element

Alex Deucher <[email protected]>
drm/amdgpu: restore original stable pstate on ctx fini

Alex Deucher <[email protected]>
drm/amdgpu: use the same HDP flush registers for all nbio 2.3.x

Alex Deucher <[email protected]>
drm/amdgpu: use the same HDP flush registers for all nbio 7.4.x

Rustam Subkhankulov <[email protected]>
wifi: p54: add missing parentheses in p54_flush()

Christophe JAILLET <[email protected]>
wifi: p54: Fix an error handling path in p54spi_probe()

Dan Carpenter <[email protected]>
wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()

Jernej Skrabec <[email protected]>
media: cedrus: h265: Fix logic for not low delay flag

Benjamin Gaignard <[email protected]>
media: uapi: HEVC: Change pic_order_cnt definition in v4l2_hevc_dpb_entry

Jernej Skrabec <[email protected]>
media: cedrus: h265: Fix flag name

Jason A. Donenfeld <[email protected]>
fs: check FMODE_LSEEK to control internal pipe splicing

Yang Yingliang <[email protected]>
media: ov7251: add missing disable functions on error in ov7251_set_power_on()

Sakari Ailus <[email protected]>
media: v4l: async: Also match secondary fwnode endpoints

Johannes Berg <[email protected]>
wifi: nl80211: acquire wdev mutex for dump_survey

Alexei Starovoitov <[email protected]>
bpf: Fix subprog names in stack traces.

Wolfram Sang <[email protected]>
selftests: timers: clocksource-switch: fix passing errors from child

Wolfram Sang <[email protected]>
selftests: timers: valid-adjtimex: build fix for newer toolchains

David Gow <[email protected]>
kunit: executor: Fix a memory leak on failure in kunit_filter_tests

Anquan Wu <[email protected]>
libbpf: Fix the name of a reused map

Yonglong Li <[email protected]>
tcp: make retransmitted SKB fit into the send window

Song Liu <[email protected]>
bpf, x86: fix freeing of not-finalized bpf_prog_pack

Tony Ambardar <[email protected]>
bpf, x64: Add predicate for bpf2bpf with tailcalls support in JIT

Jian Zhang <[email protected]>
drm/exynos/exynos7_drm_decon: free resources when clk_set_parent() failed.

Liu Jian <[email protected]>
skmsg: Fix invalid last sg check in sk_msg_recvmsg()

Liang He <[email protected]>
mediatek: mt76: eeprom: fix missing of_node_put() in mt76_find_power_limits_node()

Liang He <[email protected]>

    mediatek: mt76: mac80211: Fix missing of_node_put() in mt76_led_init()

Felix Fietkau <[email protected]>
mt76: mt7615: fix throughput regression on DFS channels

Shayne Chen <[email protected]>
mt76: mt7915: fix incorrect testmode ipg on band 1 caused by wmm_idx

Lorenzo Bianconi <[email protected]>
mt76: connac: move connac2_mac_write_txwi in mt76_connac module

Lorenzo Bianconi <[email protected]>
mt76: connac: move mac connac2 defs in mt76_connac2_mac.h

Lorenzo Bianconi <[email protected]>

    mt76: mt7915: rely on mt76_dev in mt7915_mac_write_txwi signature

Lorenzo Bianconi <[email protected]>

    mt76: mt7921: rely on mt76_dev in mt7921_mac_write_txwi signature

Deren Wu <[email protected]>
mt76: mt7921: enlarge maximum VHT MPDU length to 11454

Deren Wu <[email protected]>
mt76: mt7921: fix aggregation subframes setting to HE max

Deren Wu <[email protected]>
mt76: mt7921s: fix possible sdio deadlock in command fail

Lorenzo Bianconi <[email protected]>
mt76: mt7921: do not update pm states in case of error

Lorenzo Bianconi <[email protected]>
mt76: mt7615: do not update pm stats in case of error

Johannes Berg <[email protected]>
wifi: mac80211: move some future per-link data to bss_conf

Johannes Berg <[email protected]>
wifi: cfg80211: do some rework towards MLO link APIs

Johannes Berg <[email protected]>
wifi: mac80211: reject WEP or pairwise keys with key ID > 3

Deren Wu <[email protected]>
mt76: mt7921: not support beacon offload disable command

YN Chen <[email protected]>
mt76: mt7921s: fix firmware download random fail

Dan Carpenter <[email protected]>

    mt76: mt7915: fix endian bug in mt7915_rf_regval_set()

Lorenzo Bianconi <[email protected]>

    mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msg

Lorenzo Bianconi <[email protected]>

    mt76: mt7915: fix endianness in mt7915_rf_regval_get

Ming Qian <[email protected]>
media: amphion: only insert the first sequence startcode for vc1l format

Ming Qian <[email protected]>
media: amphion: sync buffer status with firmware during abort

Ezequiel Garcia <[email protected]>
media: hantro: Fix RK3399 H.264 format advertising

Benjamin Gaignard <[email protected]>
media: hantro: Be more accurate on pixel formats step_width constraints

Ming Qian <[email protected]>
media: amphion: defer setting last_buffer_dequeued until resolution changes are processed

Chen-Yu Tsai <[email protected]>
media: mediatek: vcodec: Initialize decoder parameters for each instance

Chen-Yu Tsai <[email protected]>
media: mediatek: vcodec: decoder: Drop max_{width,height} from mtk_vcodec_ctx

Chen-Yu Tsai <[email protected]>
media: mediatek: vcodec: decoder: Skip alignment for default resolution

Chen-Yu Tsai <[email protected]>
media: mediatek: vcodec: decoder: Fix resolution clamping in TRY_FMT

Chen-Yu Tsai <[email protected]>
media: mediatek: vcodec: decoder: Fix 4K frame size enumeration

Hans de Goede <[email protected]>
media: atomisp: revert "don't pass a pointer to a local variable"

Rob Clark <[email protected]>
drm/msm/dpu: Fix for non-visible planes

Ming Qian <[email protected]>
media: amphion: release core lock before reset vpu core

AngeloGioacchino Del Regno <[email protected]>
media: platform: mtk-mdp: Fix mdp_ipi_comm structure alignment

Zhengchao Shao <[email protected]>
crypto: hisilicon - Kunpeng916 crypto driver don't sleep when in softirq

Zhengchao Shao <[email protected]>
crypto: hisilicon/sec - don't sleep when in softirq

Mateusz Jończyk <[email protected]>
drm/radeon: avoid bogus "vram limit (0) must be a power of 2" warning

Rob Clark <[email protected]>
drm/msm/mdp5: Fix global state lock backoff

Yixun Lan <[email protected]>
libbpf, riscv: Use a0 for RC register

Douglas Anderson <[email protected]>
drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy

Hsin-Yi Wang <[email protected]>
drm/bridge: anx7625: Fix NULL pointer crash when using edp-panel

Qiao Ma <[email protected]>
net: hinic: avoid kernel hung in hinic_get_stats64()

Qiao Ma <[email protected]>
net: hinic: fix bug that ethtool get wrong stats

Christophe JAILLET <[email protected]>
hinic: Use the bitmap API when applicable

Vladimir Oltean <[email protected]>
net: dsa: felix: build as module when tc-taprio is module

Vladimir Oltean <[email protected]>

    net: sched: provide shim definitions for taprio_offload_{get,free}

Rob Clark <[email protected]>
drm/msm: Fix fence rollover issue

Hangyu Hua <[email protected]>
drm: bridge: sii8620: fix possible off-by-one

Dmitry Baryshkov <[email protected]>
drm/msm/hdmi: fill the pwr_regs bulk regulators

Abhinav Kumar <[email protected]>
drm/msm/dpu: remove hard-coded linewidth limit for writeback

Abhinav Kumar <[email protected]>
drm/msm/dpu: fix maxlinewidth for writeback block

Abhinav Kumar <[email protected]>
drm/msm/dpu: move intf and wb assignment to dpu_encoder_setup_display()

Guillaume Ranquet <[email protected]>
drm/mediatek: dpi: Only enable dpi after the bridge is enabled

Bo-Chen Chen <[email protected]>
drm/mediatek: dpi: Remove output format of YUV

Christophe JAILLET <[email protected]>
drm/rockchip: Fix an error handling path rockchip_dp_probe()

Brian Norris <[email protected]>
drm/rockchip: vop: Don't crash for invalid duplicate_state()

Alaa Mohamed <[email protected]>
selftests: net: fib_rule_tests: fix support for running individual tests

Vladimir Oltean <[email protected]>
net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port

Vladimir Oltean <[email protected]>
net: dsa: felix: keep reference on entire tc-taprio config

Xiaoliang Yang <[email protected]>
net: dsa: felix: update base time of time-aware shaper when adjusting PTP time

Maciej Fijalkowski <[email protected]>
selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0

Qian Cai <[email protected]>
crypto: arm64/gcm - Select AEAD for GHASH_ARM64_CE

Matthew Wilcox (Oracle) <[email protected]>
mm: Account dirty folios properly during splits

Dave Stevenson <[email protected]>
drm/vc4: hdmi: Move pixel doubling from Pixelvalve to HDMI block

Dave Stevenson <[email protected]>
drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes

Dom Cobley <[email protected]>
drm/vc4: hdmi: Force modeset when bpc or format changes

Mateusz Kwiatkowski <[email protected]>
drm/vc4: hdmi: Fix timings for interlaced modes

Dave Stevenson <[email protected]>
drm/vc4: hdmi: Move HDMI reset to pm_resume

Dave Stevenson <[email protected]>
drm/vc4: hdmi: Switch to pm_runtime_status_suspended

Dave Stevenson <[email protected]>
drm/vc4: hdmi: Reset HDMI MISC_CONTROL register

Dom Cobley <[email protected]>
drm/vc4: hdmi: Avoid full hdmi audio fifo writes

Dom Cobley <[email protected]>
drm/vc4: hdmi: Clear unused infoframe packet RAM registers

Dave Stevenson <[email protected]>
drm/vc4: hdmi: Add all the vc5 HDMI registers into the debugfs dumps

Dave Stevenson <[email protected]>
drm/vc4: dsi: Add correct stop condition to vc4_dsi_encoder_disable iteration

Dave Stevenson <[email protected]>
drm/vc4: dsi: Fix dsi0 interrupt support

Dave Stevenson <[email protected]>
drm/vc4: dsi: Register dsi0 as the correct vc4 encoder type

Dave Stevenson <[email protected]>
drm/vc4: dsi: Correct pixel order for DSI0

Dave Stevenson <[email protected]>
drm/vc4: dsi: Correct DSI divider calculations

Dave Stevenson <[email protected]>
drm/vc4: dsi: Release workaround buffer and DMA

Dave Stevenson <[email protected]>
drm/vc4: plane: Fix margin calculations for the right/bottom edges

Dom Cobley <[email protected]>
drm/vc4: plane: Remove subpixel positioning check

Maxime Ripard <[email protected]>
drm/vc4: kms: Use maximum FIFO load for the HVS clock rate

Yunfei Dong <[email protected]>
media: mediatek: vcodec: Fix non subdev architecture open power fail

Miaoqian Lin <[email protected]>
media: tw686x: Fix memory leak in tw686x_video_init

Jian Zhang <[email protected]>
media: driver/nxp/imx-jpeg: fix a unexpected return value problem

Chen-Yu Tsai <[email protected]>
media: mediatek: vcodec: Skip SOURCE_CHANGE & EOS events for stateless

Yunfei Dong <[email protected]>
media: mediatek: vcodec: Initialize decoder parameters after getting dec_capability

Arnd Bergmann <[email protected]>
media: sta2x11: remove VIRT_TO_BUS dependency

Ming Qian <[email protected]>
media: v4l2-mem2mem: prevent pollerr when last_buffer_dequeued is set

Niels Dossche <[email protected]>
media: hdpvr: fix error value returns in hdpvr_read

Miaoqian Lin <[email protected]>
drm/mcde: Fix refcount leak in mcde_dsi_bind

Ming Qian <[email protected]>
media: amphion: output firmware error message

Ming Qian <[email protected]>
media: imx-jpeg: Disable slot interrupt when frame done

Jiasheng Jiang <[email protected]>
drm: bridge: adv7511: Add check for mipi_dsi_driver_register

Tom Lendacky <[email protected]>
crypto: ccp - During shutdown, check SEV data pointer before using

Jörn-Thorben Hinz <[email protected]>
selftests/bpf: Fix rare segfault in sock_fields prog test

YueHaibing <[email protected]>
drm/display: Fix build error without CONFIG_OF

Jian Shen <[email protected]>
test_bpf: fix incorrect netdev features

Frederic Weisbecker <[email protected]>
rcutorture: Fix ksoftirqd boosting timing and iteration

Paul E. McKenney <[email protected]>
torture: Adjust to again produce debugging information

Yifan Zhang <[email protected]>
drm/amdkfd: correct sdma queue number of sdma 6.0.1

Mario Limonciello <[email protected]>
drm/amd: Don't show warning on reading vbios values for SMU13 3.1

Alex Deucher <[email protected]>
drm/radeon: fix incorrrect SPDX-License-Identifiers

Ping-Ke Shih <[email protected]>
wifi: rtw89: 8852a: rfk: fix div 0 exception

Alexey Kodanev <[email protected]>
wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()

Johannes Berg <[email protected]>
wifi: mac80211: set STA deflink addresses

Pavel Skripkin <[email protected]>
ath9k: fix use-after-free in ath9k_hif_usb_rx_cb

Niklas Söderlund <[email protected]>
media: rcar-vin: Fix channel routing for Ebisu

Ming Qian <[email protected]>
media: imx-jpeg: Implement drain using v4l2-mem2mem helpers

Ming Qian <[email protected]>
media: imx-jpeg: Align upwards buffer size

Ming Qian <[email protected]>
media: imx-jpeg: Leave a blank space before the configuration data

Ming Qian <[email protected]>
media: imx-jpeg: Correct some definition according specification

Benjamin Gaignard <[email protected]>
media: Hantro: Correct G2 init qp field

Ming Qian <[email protected]>
media: amphion: return error if format is unsupported by vpu

Zheyu Ma <[email protected]>
media: tw686x: Register the irq at the end of probe

Yang Yingliang <[email protected]>
media: camss: csid: fix wrong size passed to devm_kmalloc_array()

Eugen Hristev <[email protected]>
media: atmel: atmel-sama7g5-isc: fix warning in configs without OF

Kuniyuki Iwashima <[email protected]>

    raw: Fix mixed declarations error in raw_icmp_error().

Eric Dumazet <[email protected]>

    raw: convert raw sockets to RCU

Eric Dumazet <[email protected]>

    raw: use more conventional iterators

Eric Dumazet <[email protected]>
ping: convert to RCU lookups, get rid of rwlock

Oleksij Rempel <[email protected]>
net: ag71xx: fix discards 'const' qualifier warning

Alexey Khoroshilov <[email protected]>
crypto: sun8i-ss - fix infinite loop in sun8i_ss_setup_ivs()

Eric Dumazet <[email protected]>
tcp: fix possible freeze in tx path under memory pressure

Andrii Nakryiko <[email protected]>
selftests/bpf: Don't force lld on non-x86 architectures

Andrii Nakryiko <[email protected]>
libbpf: Fix internal USDT address translation logic for shared libraries

Xu Wang <[email protected]>
i2c: Fix a potential use after free

Zheng Bin <[email protected]>
drm/bridge: it6505: Add missing CRYPTO_HASH dependency

Nícolas F. R. A. Prado <[email protected]>
drm/bridge: anx7625: Zero error variable when panel bridge not present

Marc Kleine-Budde <[email protected]>
can: netlink: allow configuring of fixed data bit rates without need for do_set_data_bittiming callback

Tales Lelo da Aparecida <[email protected]>

    drm/vkms: check plane_composer->map[0] before using it

Marc Kleine-Budde <[email protected]>
can: netlink: allow configuring of fixed bit rates without need for do_set_bittiming callback

Eric Dumazet <[email protected]>
net: fix sk_wmem_schedule() and sk_rmem_schedule() errors

Peng Wu <[email protected]>
crypto: sun8i-ss - fix a NULL vs IS_ERR() check in sun8i_ss_hashkey

Dan Carpenter <[email protected]>
crypto: sun8i-ss - Fix error codes for dma_mapping_error()

Dan Carpenter <[email protected]>
crypto: sun8i-ss - fix error codes in allocate_flows()

Antonio Borneo <[email protected]>
drm: adv7511: override i2c address of cec before accessing it

Andrii Nakryiko <[email protected]>
libbpf: Fix uprobe symbol file offset calculation logic

Miaoqian Lin <[email protected]>
drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_init

Xiaomeng Tong <[email protected]>
virtio-gpu: fix a missing check to avoid NULL dereference

Fabio Estevam <[email protected]>
i2c: mxs: Silence a clang warning

Tali Perry <[email protected]>
i2c: npcm: Correct slave role behavior

Tali Perry <[email protected]>
i2c: npcm: Remove own slave addresses 2:10

Leung, Martin <[email protected]>
drm/amdgpu/display: Prepare for new interfaces

ZhenGuo Yin <[email protected]>
drm/amdgpu: fix scratch register access method in SRIOV

Bjorn Andersson <[email protected]>
drm/bridge: lt9611uxc: Cancel only driver's work

Miaoqian Lin <[email protected]>
drm/meson: encoder_hdmi: Fix refcount leak in meson_encoder_hdmi_init

Miaoqian Lin <[email protected]>
drm/meson: encoder_cvbs: Fix refcount leak in meson_encoder_cvbs_init

Xinlei Lee <[email protected]>
drm/mediatek: Add pull-down MIPI operation in mtk_dsi_poweroff function

Jitao Shi <[email protected]>
drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs

Xinlei Lee <[email protected]>
drm/mediatek: Modify dsi funcs to atomic operations

Alexey Kodanev <[email protected]>
drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers()

Manikanta Pubbisetty <[email protected]>
ath11k: Avoid REO CMD failed prints during firmware recovery

Manikanta Pubbisetty <[email protected]>
ath11k: Fix incorrect debug_mask mappings

Christian Marangi <[email protected]>
ath11k: fix missing skb drop on htc_tx_completion error

Yuze Chi <[email protected]>
libbpf: Fix is_pow_of_2

Martin KaFai Lau <[email protected]>
selftests/bpf: Fix tc_redirect_dtime

Lorenzo Bianconi <[email protected]>
sample: bpf: xdp_router_ipv4: Allow the kernel to send arp requests

Yuntao Wang <[email protected]>
selftests/bpf: Fix test_run logic in fexit_stress.c

Javier Martinez Canillas <[email protected]>

    drm/ssd130x: Only define a SPI device ID table when built as a module

Yunhao Tian <[email protected]>
drm/mipi-dbi: align max_chunk to 2 in spi_transfer

Johan Hovold <[email protected]>
ath11k: fix IRQ affinity warning on shutdown

Johan Hovold <[email protected]>
ath11k: fix netdev open race

Ajay Singh <[email protected]>
wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down

Dan Carpenter <[email protected]>
wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()

Fabio Estevam <[email protected]>
drm: bridge: adv7511: Move CEC definitions to adv7511_cec.c

Gao Chao <[email protected]>

    drm/panel: Fix build error when CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m

Javier Martinez Canillas <[email protected]>
drm/st7735r: Fix module autoloading for Okaya RH128128T

John Stultz <[email protected]>
drm/bridge: lt9611: Use both bits for HDMI sensing

Jani Nikula <[email protected]>
drm/edid: reset display info in drm_add_edid_modes() for NULL edid

Manikanta Pubbisetty <[email protected]>
ath11k: Init hw_params before setting up AHB resources

Baochen Qiang <[email protected]>
ath11k: Fix warning on variable 'sar' dereference before check

Krzysztof Kozlowski <[email protected]>
ath10k: do not enforce interrupt trigger type

Marek Vasut <[email protected]>
drm/bridge: tc358767: Make sure Refclk clock are enabled

Marek Vasut <[email protected]>

    drm/bridge: tc358767: Handle dsi_lanes == 0 as invalid

Douglas Anderson <[email protected]>
drm/dp: Export symbol / kerneldoc fixes for DP AUX bus

Miaoqian Lin <[email protected]>
drm/meson: Fix refcount leak in meson_encoder_hdmi_init

Thomas Zimmermann <[email protected]>
drm/mgag200: Acquire I/O lock while reading EDID

Xin Ji <[email protected]>
drm/bridge: anx7625: Use DPI bus type

Geert Uytterhoeven <[email protected]>
drm: bridge: DRM_FSL_LDB should depend on ARCH_MXC

Dan Carpenter <[email protected]>
drm/rockchip: vop2: unlock on error path in vop2_crtc_atomic_enable()

Jani Nikula <[email protected]>
drm/i915: remove unused GEM_DEBUG_DECL() and GEM_DEBUG_BUG_ON()

Marek Vasut <[email protected]>
dt-bindings: display: bridge: ldb: Fill in reg property

Hongnan Li <[email protected]>

    erofs: update ctx->pos for every emitted dirent

Uwe Kleine-König <[email protected]>
pwm: lpc18xx: Fix period handling

Uwe Kleine-König <[email protected]>
pwm: sifive: Shut down hardware only after pwmchip_remove() completed

Uwe Kleine-König <[email protected]>
pwm: sifive: Ensure the clk is enabled exactly once per running PWM

Uwe Kleine-König <[email protected]>
pwm: sifive: Simplify offset calculation for PWMCMP registers

Mike Snitzer <[email protected]>
dm: return early from dm_pr_call() if DM device is suspended

Colin Ian King <[email protected]>
tools/power turbostat: Fix file pointer leak

Markus Mayer <[email protected]>
thermal/tools/tmon: Include pthread and time headers in tmon.h

YiFei Zhu <[email protected]>
selftests/seccomp: Fix compile warning when CC=clang

Michal Koutný <[email protected]>
io_uring: Don't require reinitable percpu_ref

Jens Axboe <[email protected]>
io_uring: define a 'prep' and 'issue' handler for each opcode

Jens Axboe <[email protected]>
io_uring: move to separate directory

Peter Zijlstra <[email protected]>
x86/extable: Fix ex_handler_msr() print condition

Mel Gorman <[email protected]>
sched/numa: Initialise numa_migrate_retry

Christian Göttsche <[email protected]>
sched: only perform capability check on privileged operation

Nicolas Saenz Julienne <[email protected]>
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()

Anshuman Khandual <[email protected]>
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX

Liang He <[email protected]>
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()

Xu Qiang <[email protected]>
irqdomain: Report irq number for NOMAP domains

Stephan Gerhold <[email protected]>
ARM: dts: qcom: msm8974: Disable remoteprocs by default

Sumit Garg <[email protected]>
arm64: dts: qcom: qcs404: Fix incorrect USB2 PHYs assignment

Marijn Suijten <[email protected]>
arm64: dts: qcom: msm8998: Make regulator voltages multiple of step-size

Parikshit Pareek <[email protected]>
soc: qcom: socinfo: Fix the id of SA8540P SoC

Konrad Dybcio <[email protected]>
soc: qcom: Make QCOM_RPMPD depend on PM

Liang He <[email protected]>
regulator: of: Fix refcount leak bug in of_get_regulation_constraints()

Mikulas Patocka <[email protected]>
dm writecache: count number of blocks discarded, not number of discard bios

Mikulas Patocka <[email protected]>
dm writecache: count number of blocks written, not number of write bios

Mikulas Patocka <[email protected]>
dm writecache: count number of blocks read, not number of read bios

Mikulas Patocka <[email protected]>
dm writecache: return void from functions

Hsin-Yi Wang <[email protected]>
PM: domains: Ensure genpd_debugfs_dir exists before remove

Bart Van Assche <[email protected]>
blktrace: Trace remapped requests correctly

Linus Walleij <[email protected]>
hwmon: (drivetemp) Add module alias

Armin Wolf <[email protected]>
hwmon: (sch56xx-common) Add DMI override table

Yang Yingliang <[email protected]>
spi: tegra20-slink: fix UAF in tegra_slink_remove()

Yang Yingliang <[email protected]>
spi: Fix simplification of devm_spi_register_controller

Nandhini Srikandan <[email protected]>
spi: dw: Fix IP-core versions macro

Ming Lei <[email protected]>

    blk-mq: don't create hctx debugfs dir until q->debugfs_dir is created

Andy Shevchenko <[email protected]>
spi: Return deferred probe error when controller isn't yet available

Gao Xiang <[email protected]>
erofs: avoid consecutive detection for Highmem memory

Yuwen Chen <[email protected]>
erofs: wake up all waiters after z_erofs_lzma_head ready

Johan Hovold <[email protected]>
arm64: dts: qcom: sc7280: fix PCIe clock reference

Tamás Szűcs <[email protected]>
arm64: tegra: Fix SDMMC1 CD on P2888

Mikko Perttunen <[email protected]>
arm64: tegra: Mark BPMP channels as no-memory-wc

Nick Hainke <[email protected]>

    arm64: dts: mt7622: fix BPI-R64 WPS button

Johan Hovold <[email protected]>
arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells

Johan Hovold <[email protected]>
arm64: dts: qcom: sc7280: drop PCIe PHY clock index

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: msm8996: correct #clock-cells for QMP PHY nodes

Marijn Suijten <[email protected]>
arm64: dts: qcom: sm6125: Append -state suffix to pinctrl nodes

Marijn Suijten <[email protected]>

    arm64: dts: qcom: sm6125: Move sdc2 pinctrl from seine-pdx201 to sm6125

Yang Yingliang <[email protected]>
m68k: virt: Fix missing platform_device_unregister() on error in virt_platform_init()

Eric Auger <[email protected]>
ACPI: VIOT: Fix ACS setup

Chanho Park <[email protected]>
arm64: dts: exynosautov9: correct spi11 pin names

Kan Liang <[email protected]>
perf/x86/intel: Fix PEBS data source encoding for ADL

Kan Liang <[email protected]>
perf/x86/intel: Fix PEBS memory access info encoding for ADL

Krzysztof Kozlowski <[email protected]>
arm64: dts: qcom: msm8994: add required ranges to OCMEM

Sireesh Kodali <[email protected]>
arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc node

GONG, Ruiqi <[email protected]>
stack: Declare {randomize_,}kstack_offset to fix Sparse warnings

Kees Cook <[email protected]>
lib: overflow: Do not define 64-bit tests on 32-bit

Jason A. Donenfeld <[email protected]>
usercopy: use unsigned long instead of uintptr_t

Yang Yingliang <[email protected]>
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()

Krzysztof Kozlowski <[email protected]>
ARM: dts: qcom: pm8841: add required thermal-sensor-cells

Krzysztof Kozlowski <[email protected]>
ARM: dts: qcom: msm8974: add required ranges to OCMEM

Miaoqian Lin <[email protected]>
soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register

Miaoqian Lin <[email protected]>
soc: qcom: ocmem: Fix refcount leak in of_get_ocmem

Luca Weiss <[email protected]>
ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1

Christian Marangi <[email protected]>
ARM: dts: qcom: replace gcc PXO with pxo_board fixed clock

Dan Williams <[email protected]>
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP

Stephan Gerhold <[email protected]>
regulator: qcom_smd: Fix pm8916_pldo range

Chris Paterson <[email protected]>
arm64: dts: renesas: r9a07g054l2-smarc: Correct SoC name in comment

Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: r8a779m8: Drop operating points above 1.5 GHz

Miaoqian Lin <[email protected]>
cpufreq: zynq: Fix refcount leak in zynq_get_revision

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sdm636-sony-xperia-ganges-mermaid: correct sdc2 pinconf

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sdm630: fix gpu's interconnect path

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sdm630: fix the qusb2phy ref clock

Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: sdm630: disable GPU by default

Miaoqian Lin <[email protected]>
ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init

Miaoqian Lin <[email protected]>
ARM: OMAP2+: Fix refcount leak in omapdss_init_of

Krzysztof Kozlowski <[email protected]>
ARM: dts: qcom: mdm9615: add missing PMIC GPIO reg

Marijn Suijten <[email protected]>
arm64: dts: qcom: sdm845-akatsuki: Round down l22a regulator voltage

Keith Busch <[email protected]>
block: fix infinite loop for invalid zone append

Krzysztof Kozlowski <[email protected]>
spi: s3c64xx: constify fsd_spi_port_config

Michael Walle <[email protected]>
soc: fsl: guts: machine variable might be unset

Stephen Boyd <[email protected]>
arm64: dts: qcom: sc7180: Remove ipa_fw_mem node on trogdor

Peter Zijlstra <[email protected]>
locking/lockdep: Fix lockdep_init_map_*() confusion

Alexandru Elisei <[email protected]>
arm64: cpufeature: Allow different PMU versions in ID_DFR0_EL1

Mark Rutland <[email protected]>
arm64: select TRACE_IRQFLAGS_NMI_SUPPORT

Nícolas F. R. A. Prado <[email protected]>
arm64: dts: mt8192: Fix idle-states entry-method

Nícolas F. R. A. Prado <[email protected]>
arm64: dts: mt8192: Fix idle-states nodes naming scheme

Krzysztof Kozlowski <[email protected]>
ARM: dts: ast2600-evb-a1: fix board compatible

Krzysztof Kozlowski <[email protected]>
ARM: dts: ast2600-evb: fix board compatible

Krzysztof Kozlowski <[email protected]>
ARM: dts: ast2500-evb: fix board compatible

Johan Hovold <[email protected]>
x86/pmem: Fix platform-device leak in error path

Max Krummenacher <[email protected]>
Revert "ARM: dts: imx6qdl-apalis: Avoid underscore in node name"

Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: Fix thermal-sensors on single-zone sensors

Liang He <[email protected]>
soc: amlogic: Fix refcount leak in meson-secure-pwrc.c

Geert Uytterhoeven <[email protected]>

    soc: renesas: r8a779a0-sysc: Fix A2DP1 and A2CV[2357] PDR values

Marcel Ziswiler <[email protected]>
ARM: dts: imx7-colibri-eval-v3: correct can controller comment

Marcel Ziswiler <[email protected]>
ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys

Oleksandr Suvorov <[email protected]>
ARM: dts: imx7-colibri: improve wake-up with gpio key

Philippe Schenker <[email protected]>
ARM: dts: imx7-colibri: add usb dual-role switching using extcon

Marcel Ziswiler <[email protected]>
ARM: dts: imx7-colibri: overhaul display/touch functionality

Marcel Ziswiler <[email protected]>
ARM: dts: imx7d-colibri-emmc: add cpu1 supply

Guilherme G. Piccoli <[email protected]>
ACPI: processor/idle: Annotate more functions to live in cpuidle section

Miaoqian Lin <[email protected]>
ARM: bcm: Fix refcount leak in bcm_kona_smc_init

Christophe JAILLET <[email protected]>
spi: spi-altera-dfl: Fix an error handling path

Geert Uytterhoeven <[email protected]>
arm64: dts: renesas: beacon: Fix regulator node names

Miaoqian Lin <[email protected]>
meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init

Juri Lelli <[email protected]>
wait: Fix __wait_event_hrtimeout for RT/DL tasks

Kees Cook <[email protected]>
kasan: test: Silence GCC 12 warnings

Dylan Yudaken <[email protected]>
io_uring: fix io_uring_cqe_overflow trace format

Xiu Jianfeng <[email protected]>
selinux: Add boundary check in put_entry()

Xiu Jianfeng <[email protected]>
selinux: fix memleak in security_read_state_kernel()

Tetsuo Handa <[email protected]>
PM: hibernate: defer device probing when resuming from hibernation

Uwe Kleine-König <[email protected]>
hwmon: (sht15) Fix wrong assumptions in device remove callback

Hans de Goede <[email protected]>
ACPI: video: Use native backlight on Dell Inspiron N4010

Lukasz Luba <[email protected]>
PM: EM: convert power field to micro-Watts precision and align drivers

Armin Wolf <[email protected]>
hwmon: (dell-smm) Add Dell XPS 13 7390 to fan control whitelist

Lv Ruyi <[email protected]>
firmware: tegra: Fix error check return value of debugfs_create_file()

Liang He <[email protected]>
ARM: shmobile: rcar-gen2: Increase refcount for new reference

Samuel Holland <[email protected]>
arm64: dts: allwinner: a64: orangepi-win: Fix LED node name

Robert Marko <[email protected]>
arm64: dts: qcom: ipq8074: fix NAND node name

Krzysztof Kozlowski <[email protected]>
arm64: dts: qcom: add missing AOSS QMP compatible fallback

Gwendal Grignou <[email protected]>
arm64: dts: qcom: sc7280: Rename sar sensor labels

Manivannan Sadhasivam <[email protected]>
ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART

huhai <[email protected]>
ACPI: LPSS: Fix missing check in register_device_clock()

Manyi Li <[email protected]>
ACPI: PM: save NVS memory for Lenovo G40-45

Hans de Goede <[email protected]>
ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk

Hans de Goede <[email protected]>
ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks

Liang He <[email protected]>
ARM: OMAP2+: pdata-quirks: Fix refcount leak bug

Liang He <[email protected]>
ARM: OMAP2+: display: Fix refcount leak bug

Guo Mengqi <[email protected]>
spi: synquacer: Add missing clk_disable_unprepare()

David Heidelberg <[email protected]>
arm64: dts: qcom: timer should use only 32-bit size

Linus Walleij <[email protected]>
ARM: dts: ux500: Fix Gavini accelerometer mounting matrix

Linus Walleij <[email protected]>
ARM: dts: ux500: Fix Codina accelerometer mounting matrix

Linus Walleij <[email protected]>
ARM: dts: ux500: Fix Janice accelerometer mounting matrix

Christian Lamparter <[email protected]>
ARM: dts: BCM5301X: Add DT for Meraki MR26

Alexander Stein <[email protected]>
ARM: dts: imx6ul: fix qspi node compatible

Alexander Stein <[email protected]>
ARM: dts: imx6ul: fix lcdif node compatible

Alexander Stein <[email protected]>
ARM: dts: imx6ul: fix csi node compatible

Alexander Stein <[email protected]>
ARM: dts: imx6ul: fix keypad compatible

Alexander Stein <[email protected]>
ARM: dts: imx6ul: change operating-points to uint32-matrix

Alexander Stein <[email protected]>
ARM: dts: imx6ul: add missing properties for sram

William Dean <[email protected]>
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()

John Keeping <[email protected]>
sched/core: Always flush pending blk_plug

Vincent Guittot <[email protected]>
sched/fair: fix case with reduced capacity CPU

Samuel Holland <[email protected]>
genirq: GENERIC_IRQ_IPI depends on SMP

Samuel Holland <[email protected]>
irqchip/mips-gic: Only register IPI domain when SMP is enabled

Antonio Borneo <[email protected]>
genirq: Don't return error on missing optional irq_request_resources()

Chen Yu <[email protected]>
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg

Jan Kara <[email protected]>
ext2: Add more validity checks for inode counts

James Morse <[email protected]>
arm64: errata: Remove AES hwcap for COMPAT tasks

Catalin Marinas <[email protected]>

    arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"

haibinzhang (张海斌) <[email protected]>
arm64: fix oops in concurrently setting insn_emulation sysctls

Francis Laniel <[email protected]>
arm64: Do not forget syscall when starting a new thread.

Andrey Konovalov <[email protected]>
arm64: stacktrace: use non-atomic __set_bit

Andrey Konovalov <[email protected]>
arm64: kasan: do not instrument stacktrace.c

Mark Rutland <[email protected]>
arch: make TRACE_IRQFLAGS_NMI_SUPPORT generic

Wyes Karny <[email protected]>
x86: Handle idle=nomwait cmdline properly for x86_idle

Benjamin Segall <[email protected]>
epoll: autoremove wakers even more aggressively

Florian Westphal <[email protected]>
netfilter: nf_tables: fix null deref due to zeroed list head

Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: disallow jump to implicit chain from set element

Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: upfront validation of data via nft_data_init()

Thadeu Lima de Souza Cascardo <[email protected]>
netfilter: nf_tables: do not allow RULE_ID to refer to another chain

Thadeu Lima de Souza Cascardo <[email protected]>
netfilter: nf_tables: do not allow CHAIN_ID to refer to another table

Thadeu Lima de Souza Cascardo <[email protected]>
netfilter: nf_tables: do not allow SET_ID to refer to another table

Michael Grzeschik <[email protected]>
usb: dwc3: gadget: fix high speed multiplier setting

Michael Grzeschik <[email protected]>
usb: dwc3: gadget: refactor dwc3_repare_one_trb

Alan Stern <[email protected]>
USB: gadget: Fix use-after-free Read in usb_udc_uevent()

Kunihiko Hayashi <[email protected]>
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC

Kunihiko Hayashi <[email protected]>
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC

Jose Alonso <[email protected]>

    Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP"

Weitao Wang <[email protected]>
USB: HCD: Fix URB giveback issue in tasklet function

Linyu Yuan <[email protected]>
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion

Suzuki K Poulose <[email protected]>
coresight: Clear the connection field properly

Huacai Chen <[email protected]>
MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

Michael Ellerman <[email protected]>
powerpc/powernv: Avoid crashing if rng is NULL

Christophe Leroy <[email protected]>
powerpc/ptdump: Fix display of RW pages on FSL_BOOK3E

Pali Rohár <[email protected]>
powerpc/fsl-pci: Fix Class Code of PCIe Root Port

Christophe Leroy <[email protected]>
powerpc/64e: Fix early TLB miss with KUAP

Christophe Leroy <[email protected]>
powerpc: Restore CONFIG_DEBUG_INFO in defconfigs

Alexander Lobakin <[email protected]>
ia64, processor: fix -Wincompatible-pointer-types in ia64_get_irr()

Xiaomeng Tong <[email protected]>
media: [PATCH] pci: atomisp_cmd: fix three missing checks on list iterator

Randy Dunlap <[email protected]>
media: isl7998x: select V4L2_FWNODE to fix build error

Jan Kara <[email protected]>
mbcache: add functions to delete entry if unused

Jan Kara <[email protected]>
mbcache: don't reclaim used entries

Mikulas Patocka <[email protected]>
md-raid10: fix KASAN warning

Mikulas Patocka <[email protected]>
md-raid: destroy the bitmap after destroying the thread

Narendra Hadke <[email protected]>
serial: mvebu-uart: uart2 error bits clearing

Miklos Szeredi <[email protected]>
fuse: fix deadlock between atomic O_TRUNC and page invalidation

Miklos Szeredi <[email protected]>
fuse: write inode in fuse_release()

Miklos Szeredi <[email protected]>
fuse: ioctl: translate ENOSYS

Miklos Szeredi <[email protected]>
fuse: limit nsec

Namjae Jeon <[email protected]>
ksmbd: fix heap-based overflow in set_ntacl_dacl()

Namjae Jeon <[email protected]>
ksmbd: fix use-after-free bug in smb2_tree_disconect

Hyunchul Lee <[email protected]>
ksmbd: prevent out of bound read for SMB2_WRITE

Hyunchul Lee <[email protected]>
ksmbd: prevent out of bound read for SMB2_TREE_CONNNECT

Namjae Jeon <[email protected]>
ksmbd: fix memory leak in smb2_handle_negotiate

Srinivas Kandagatla <[email protected]>
soundwire: qcom: Check device status before reading devid

Bikash Hazarika <[email protected]>
scsi: qla2xxx: Zero undefined mailbox IN registers

Bikash Hazarika <[email protected]>
scsi: qla2xxx: Fix incorrect display of max frame size

Tony Battersby <[email protected]>
scsi: sg: Allow waiting for commands to complete on removed device

James Smart <[email protected]>
scsi: lpfc: Remove extra atomic_inc on cmd_pending in queuecommand after VMID

Zheyu Ma <[email protected]>

    iio: light: isl29028: Fix the warning in isl29028_remove()

Fawzi Khaber <[email protected]>
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT

Jason A. Donenfeld <[email protected]>
um: seed rng using host OS rng

Benjamin Beichler <[email protected]>
um: Remove straying parenthesis

Amit Kumar Mahapatra <[email protected]>
mtd: rawnand: arasan: Update NAND bus clock instead of system clock

Olga Kitaina <[email protected]>
mtd: rawnand: arasan: Fix clock rate in NV-DDR

Qu Wenruo <[email protected]>
btrfs: reject log replay if there is unsupported RO compat flag

Tadeusz Struk <[email protected]>
bpf: Fix KASAN use-after-free Read in compute_effective_progs

Leo Li <[email protected]>
drm/amdgpu: Check BO's requested pinning domains against its preferred_domains

Dmitry Osipenko <[email protected]>
drm/tegra: Fix vmapping of prime buffers

Lyude Paul <[email protected]>
drm/nouveau/kms: Fix failure path for creating DP connectors

Lyude Paul <[email protected]>
drm/nouveau/acpi: Don't print error when we get -EINPROGRESS from pm_runtime

Lyude Paul <[email protected]>
drm/nouveau: Don't pm_runtime_put_sync(), only pm_runtime_put_autosuspend()

Timur Tabi <[email protected]>
drm/nouveau: fix another off-by-one in nvbios_addr

Imre Deak <[email protected]>
drm/dp/mst: Read the extended DPCD capabilities during system resume

Thomas Zimmermann <[email protected]>
drm/hyperv-drm: Include framebuffer and EDID headers

Thomas Zimmermann <[email protected]>
drm/fb-helper: Fix out-of-bounds access

Paul Cercueil <[email protected]>
drm/ingenic: Use the highest possible DMA burst size

Phil Elwell <[email protected]>
drm/vc4: hdmi: Disable audio if dmas property is present but empty

Dmitry Osipenko <[email protected]>
drm/shmem-helper: Add missing vunmap on error

Dmitry Osipenko <[email protected]>
drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error

Mathew McBride <[email protected]>

    rtc: rx8025: fix 12/24 hour mode detection on RX-8035

Jason A. Donenfeld <[email protected]>
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32

Atish Patra <[email protected]>
RISC-V: Update user page mapping only once during start

Atish Patra <[email protected]>
RISC-V: Fix SBI PMU calls for RV32

Atish Patra <[email protected]>
RISC-V: Fix counter restart during overflow for RV32

Xianting Tian <[email protected]>
RISC-V: Add modules to virtual kernel memory layout dump

Xianting Tian <[email protected]>
RISC-V: Fixup schedule out issue in machine_crash_shutdown()

Xianting Tian <[email protected]>
RISC-V: Fixup get incorrect user mode PC for kernel mode regs

Xianting Tian <[email protected]>
RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context

Ben Dooks <[email protected]>
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>

Ben Dooks <[email protected]>
RISC-V: cpu_ops_spinwait.c should include head.h

Mark Kettenis <[email protected]>
riscv: dts: starfive: correct number of external interrupts

Conor Dooley <[email protected]>
dt-bindings: riscv: fix SiFive l2-cache's cache-sets

Chen Lifu <[email protected]>
riscv: lib: uaccess: fix CSR_STATUS SR_SUM bit

Yipeng Zou <[email protected]>
riscv:uprobe fix SR_SPIE set/clear handling

Helge Deller <[email protected]>
parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode

William Dean <[email protected]>
parisc: Check the return value of ioremap() in lba_driver_probe()

Helge Deller <[email protected]>
parisc: Drop pa_swapper_pg_lock spinlock

Helge Deller <[email protected]>
parisc: Fix device names in /proc/iomem

Jiachen Zhang <[email protected]>
ovl: drop WARN_ON() dentry is NULL in ovl_encode_fh()

John Allen <[email protected]>
crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent kernel memory leak

Al Viro <[email protected]>
fix short copy handling in copy_mc_pipe_to_iter()

Lukas Wunner <[email protected]>
usbnet: smsc95xx: Fix deadlock on runtime resume

Lukas Wunner <[email protected]>
usbnet: Fix linkwatch use-after-free on disconnect

Helge Deller <[email protected]>
fbcon: Fix accelerated fbdev scrolling while logo is still shown

Helge Deller <[email protected]>
fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters

Rafael J. Wysocki <[email protected]>
thermal: sysfs: Fix cooling_device_stats_setup() error code path

Yang Xu <[email protected]>
fs: Add missing umask strip in vfs_tmpfile

David Howells <[email protected]>
vfs: Check the truncate maximum size in inode_newsize_ok()

Tetsuo Handa <[email protected]>
tty: vt: initialize unicode screen buffer

Cameron Williams <[email protected]>
tty: 8250: Add support for Brainboxes PX cards.

Huacai Chen <[email protected]>
LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

Bedant Patnaik <[email protected]>
ALSA: hda/realtek: Add a quirk for HP OMEN 15 (8786) mute LED

Meng Tang <[email protected]>
ALSA: hda/realtek: Add quirk for another Asus K42JZ model

Allen Ballway <[email protected]>
ALSA: hda/cirrus - support for iMac 12,1 model

Meng Tang <[email protected]>
ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model

Coleman Dietsch <[email protected]>
KVM: x86/xen: Stop Xen timer before changing IRQ

Coleman Dietsch <[email protected]>
KVM: x86/xen: Initialize Xen timer only once

Paolo Bonzini <[email protected]>
KVM: x86: revalidate steal time cache if MSR value changes

Paolo Bonzini <[email protected]>
KVM: x86: do not report preemption if the steal time cache is stale

Sean Christopherson <[email protected]>
KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change

Sean Christopherson <[email protected]>

    KVM: x86: Tag kvm_mmu_x86_module_init() with __init

Sean Christopherson <[email protected]>
KVM: SVM: Disable SEV-ES support if MMIO caching is disable

Sean Christopherson <[email protected]>
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT

Sean Christopherson <[email protected]>
KVM: x86: Set error code to segment selector on LLDT/LTR non-canonical #GP

Sean Christopherson <[email protected]>
KVM: x86: Mark TSS busy during LTR emulation _after_ all fault checks

Sean Christopherson <[email protected]>
KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4

Sean Christopherson <[email protected]>
KVM: nVMX: Account for KVM reserved CR4 bits in consistency checks

Sean Christopherson <[email protected]>
KVM: nVMX: Let userspace set nVMX MSR to any _host_ supported value

Sean Christopherson <[email protected]>
KVM: x86: Split kvm_is_valid_cr4() and export only the non-vendor bits

Sean Christopherson <[email protected]>
KVM: Do not incorporate page offset into gfn=>pfn cache user address

Sean Christopherson <[email protected]>
KVM: Fix multiple races in gfn=>pfn cache refresh

Sean Christopherson <[email protected]>
KVM: Fully serialize gfn=>pfn cache refresh via mutex

Sean Christopherson <[email protected]>
KVM: Put the extra pfn reference when reusing a pfn in the gpc cache

Sean Christopherson <[email protected]>
KVM: Drop unused @gpa param from gfn=>pfn cache's __release_gpc() helper

Nico Boehr <[email protected]>
KVM: s390: pv: don't present the ecall interrupt twice

Maciej S. Szmigiero <[email protected]>
KVM: SVM: Don't BUG if userspace injects an interrupt with GIF=0

Sean Christopherson <[email protected]>
KVM: nVMX: Snapshot pre-VM-Enter DEBUGCTL for !nested_run_pending case

Sean Christopherson <[email protected]>
KVM: nVMX: Snapshot pre-VM-Enter BNDCFGS for !nested_run_pending case

Ping Cheng <[email protected]>
HID: wacom: Don't register pad_input for touch switch

Ping Cheng <[email protected]>
HID: wacom: Only report rotation for art pen

Guenter Roeck <[email protected]>
HID: nintendo: Add missing array termination

Maximilian Luz <[email protected]>
HID: hid-input: add Surface Go battery quirk

Jeff Layton <[email protected]>
lockd: detect and reject lock arguments that overflow

Mikulas Patocka <[email protected]>
add barriers to buffer_uptodate and set_buffer_uptodate

Johannes Berg <[email protected]>

    wifi: mac80211_hwsim: use 32-bit skb cookie

Johannes Berg <[email protected]>
wifi: mac80211_hwsim: add back erroneously removed cast

Jeongik Cha <[email protected]>
wifi: mac80211_hwsim: fix race condition in pending packet

Zev Weiss <[email protected]>
hwmon: (nct6775) Fix platform driver suspend regression

syed sabakareem <[email protected]>
ASoC: amd: yc: Update DMI table entries

Philipp Jungkamp <[email protected]>
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7

Ivan Hasenkampf <[email protected]>

    ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx

Tim Crawford <[email protected]>
ALSA: hda/realtek: Add quirk for Clevo NV45PZ

Zheyu Ma <[email protected]>
ALSA: bcd2000: Fix a UAF bug on the error path of probing

Takashi Iwai <[email protected]>
ALSA: usb-audio: Add quirk for Behringer UMC202HD

Jeff Layton <[email protected]>
nfsd: eliminate the NFSD_FILE_BREAK_* flags

Trond Myklebust <[email protected]>
pNFS/flexfiles: Report RDMA connection errors to the server

Nilesh Javali <[email protected]>
scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"

Trond Myklebust <[email protected]>
Revert "pNFS: nfs3_set_ds_client should set NFS_CS_NOPING"

Nick Desaulniers <[email protected]>
x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments

Nick Desaulniers <[email protected]>

    Makefile: link with -z noexecstack --no-warn-rwx-segments

-------------

Diffstat:

 Documentation/ABI/testing/sysfs-driver-xen-blkback |   2 +-
 .../ABI/testing/sysfs-driver-xen-blkfront          |   2 +-
 .../admin-guide/device-mapper/writecache.rst       |  16 +-
 Documentation/admin-guide/kernel-parameters.txt    |  29 +-
 Documentation/admin-guide/pm/cpuidle.rst           |  15 +-
 Documentation/arm64/silicon-errata.rst             |   4 +
 .../bindings/display/bridge/fsl,ldb.yaml           |  16 +-
 .../devicetree/bindings/mmc/sdhci-msm.yaml         |  52 +-
 .../devicetree/bindings/riscv/sifive-l2-cache.yaml |   6 +-
 Documentation/filesystems/ext4/blockmap.rst        |   2 +-
 .../userspace-api/media/v4l/ext-ctrls-codec.rst    |   2 +-
 MAINTAINERS                                        |   7 +-
 Makefile                                           |  10 +-
 arch/Kconfig                                       |   3 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/aspeed-ast2500-evb.dts           |   2 +-
 arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts        |   1 +
 arch/arm/boot/dts/aspeed-ast2600-evb.dts           |   2 +-
 arch/arm/boot/dts/bcm53015-meraki-mr26.dts         | 166 ++++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi              |   4 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |  33 +-
 arch/arm/boot/dts/imx7-colibri-aster.dtsi          |  71 --
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi        |  91 +--
 arch/arm/boot/dts/imx7-colibri.dtsi                | 130 +++-
 arch/arm/boot/dts/imx7d-colibri-aster.dts          |  20 +
 arch/arm/boot/dts/imx7d-colibri-emmc.dtsi          |   4 +
 arch/arm/boot/dts/imx7d-colibri-eval-v3.dts        |  32 +
 arch/arm/boot/dts/imx7s-colibri-aster.dts          |  20 +
 arch/arm/boot/dts/imx7s-colibri-eval-v3.dts        |  32 +
 arch/arm/boot/dts/qcom-ipq8064.dtsi                |   2 +-
 arch/arm/boot/dts/qcom-mdm9615.dtsi                |   1 +
 arch/arm/boot/dts/qcom-msm8974.dtsi                |   7 +-
 .../arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts |   2 +
 arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts |   2 +
 arch/arm/boot/dts/qcom-pm8841.dtsi                 |   1 +
 arch/arm/boot/dts/qcom-sdx55.dtsi                  |   2 +-
 arch/arm/boot/dts/ste-ux500-samsung-codina.dts     |   4 +-
 arch/arm/boot/dts/ste-ux500-samsung-gavini.dts     |   4 +-
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts     |   4 +-
 arch/arm/boot/dts/uniphier-pxs2.dtsi               |   8 +-
 arch/arm/crypto/Kconfig                            |   2 +-
 arch/arm/crypto/Makefile                           |   4 +-
 arch/arm/crypto/blake2s-shash.c                    |  75 --
 arch/arm/mach-bcm/bcm_kona_smc.c                   |   1 +
 arch/arm/mach-dove/Kconfig                         |   1 +
 arch/arm/mach-dove/pcie.c                          |  11 +-
 arch/arm/mach-mv78xx0/pcie.c                       |  11 +-
 arch/arm/mach-omap2/display.c                      |   3 +
 arch/arm/mach-omap2/pdata-quirks.c                 |   2 +
 arch/arm/mach-omap2/prm3xxx.c                      |   1 +
 arch/arm/mach-orion5x/Kconfig                      |   1 +
 arch/arm/mach-orion5x/pci.c                        |  12 +-
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c |   5 +-
 arch/arm/mach-zynq/common.c                        |   1 +
 arch/arm/xen/enlighten.c                           |   4 +-
 arch/arm64/Kconfig                                 |  17 +
 .../boot/dts/allwinner/sun50i-a64-orangepi-win.dts |   2 +-
 .../boot/dts/exynos/exynosautov9-pinctrl.dtsi      |   6 +-
 .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts  |   2 +-
 arch/arm64/boot/dts/mediatek/mt8192.dtsi           |  26 +-
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |   1 +
 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi     |   2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |   1 +
 arch/arm64/boot/dts/nvidia/tegra234.dtsi           |   1 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |  22 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              |   2 +-
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |   4 +-
 arch/arm64/boot/dts/qcom/msm8994.dtsi              |   1 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |   6 +-
 .../qcom/msm8998-sony-xperia-yoshino-poplar.dts    |  10 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi               |   4 +-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi       |   1 +
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |  24 +-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi     |   4 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  30 +-
 arch/arm64/boot/dts/qcom/sdm630.dtsi               |   7 +-
 .../dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts |   2 +-
 .../dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts  |   5 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  22 +-
 .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts   |  36 +-
 arch/arm64/boot/dts/qcom/sm6125.dtsi               |  30 +-
 arch/arm64/boot/dts/qcom/sm6350.dtsi               |  22 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |  24 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi               |  30 +-
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  24 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi               |  22 +-
 .../boot/dts/renesas/beacon-renesom-baseboard.dtsi |   6 +-
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi          |   2 +-
 arch/arm64/boot/dts/renesas/r8a77990.dtsi          |   2 +-
 arch/arm64/boot/dts/renesas/r8a779m8.dtsi          |   5 +
 arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts  |   2 +-
 arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi   |   8 +-
 arch/arm64/crypto/Kconfig                          |   1 +
 arch/arm64/include/asm/kexec.h                     |   4 +-
 arch/arm64/include/asm/processor.h                 |   3 +-
 arch/arm64/kernel/Makefile                         |   5 +
 arch/arm64/kernel/armv8_deprecated.c               |   9 +-
 arch/arm64/kernel/cpu_errata.c                     |  16 +
 arch/arm64/kernel/cpufeature.c                     |  16 +-
 arch/arm64/kernel/hibernate.c                      |   5 -
 arch/arm64/kernel/mte.c                            |   9 -
 arch/arm64/kernel/stacktrace.c                     |   6 +-
 arch/arm64/kvm/handle_exit.c                       |   4 +-
 arch/arm64/kvm/hyp/nvhe/switch.c                   |   2 +-
 arch/arm64/kvm/hyp/vhe/switch.c                    |   2 +-
 arch/arm64/mm/copypage.c                           |   9 -
 arch/arm64/mm/mteswap.c                            |   9 -
 arch/arm64/tools/cpucaps                           |   1 +
 arch/csky/abiv1/inc/abi/string.h                   |   6 +
 arch/ia64/include/asm/processor.h                  |   2 +-
 arch/loongarch/kernel/proc.c                       |   2 +-
 arch/m68k/virt/platform.c                          |  58 +-
 arch/mips/kernel/proc.c                            |   2 +-
 arch/mips/kernel/vdso.c                            |   2 +-
 arch/mips/loongson64/numa.c                        |   1 -
 arch/mips/mm/physaddr.c                            |  14 +-
 arch/parisc/kernel/cache.c                         |   3 -
 arch/parisc/kernel/drivers.c                       |   9 +-
 arch/parisc/kernel/syscalls/syscall.tbl            |   2 +-
 arch/powerpc/configs/44x/akebono_defconfig         |   2 +-
 arch/powerpc/configs/44x/currituck_defconfig       |   2 +-
 arch/powerpc/configs/44x/fsp2_defconfig            |   2 +-
 arch/powerpc/configs/44x/iss476-smp_defconfig      |   2 +-
 arch/powerpc/configs/44x/warp_defconfig            |   2 +-
 arch/powerpc/configs/52xx/lite5200b_defconfig      |   2 +-
 arch/powerpc/configs/52xx/motionpro_defconfig      |   2 +-
 arch/powerpc/configs/52xx/tqm5200_defconfig        |   2 +-
 arch/powerpc/configs/adder875_defconfig            |   2 +-
 arch/powerpc/configs/ep8248e_defconfig             |   2 +-
 arch/powerpc/configs/ep88xc_defconfig              |   2 +-
 arch/powerpc/configs/fsl-emb-nonhw.config          |   2 +-
 arch/powerpc/configs/mgcoge_defconfig              |   2 +-
 arch/powerpc/configs/mpc5200_defconfig             |   2 +-
 arch/powerpc/configs/mpc8272_ads_defconfig         |   2 +-
 arch/powerpc/configs/mpc885_ads_defconfig          |   2 +-
 arch/powerpc/configs/ppc6xx_defconfig              |   2 +-
 arch/powerpc/configs/pq2fads_defconfig             |   2 +-
 arch/powerpc/configs/ps3_defconfig                 |   2 +-
 arch/powerpc/configs/tqm8xx_defconfig              |   2 +-
 arch/powerpc/include/asm/archrandom.h              |   5 -
 arch/powerpc/include/asm/kexec.h                   |   9 +
 arch/powerpc/include/asm/simple_spinlock.h         |  15 +-
 arch/powerpc/kernel/iommu.c                        |   5 +
 arch/powerpc/kernel/pci-common.c                   |  29 +-
 arch/powerpc/kernel/trace/ftrace.c                 |   8 +-
 arch/powerpc/kexec/file_load_64.c                  |  55 ++
 arch/powerpc/kvm/book3s_hv_builtin.c               |   7 +-
 arch/powerpc/kvm/book3s_xics.h                     |   1 +
 arch/powerpc/mm/kasan/init_32.c                    |   2 +-
 arch/powerpc/mm/nohash/8xx.c                       |   4 +-
 arch/powerpc/mm/nohash/tlb_low_64e.S               |  17 +-
 arch/powerpc/mm/pgtable_32.c                       |   6 +-
 arch/powerpc/mm/ptdump/shared.c                    |   6 +-
 arch/powerpc/perf/core-book3s.c                    |  35 +-
 arch/powerpc/platforms/Kconfig.cputype             |   4 +-
 arch/powerpc/platforms/cell/axon_msi.c             |   1 +
 arch/powerpc/platforms/cell/spufs/inode.c          |   1 +
 arch/powerpc/platforms/powernv/rng.c               |  34 +-
 arch/powerpc/platforms/pseries/iommu.c             |  89 ++-
 arch/powerpc/sysdev/fsl_pci.c                      |   8 +
 arch/powerpc/sysdev/fsl_pci.h                      |   1 +
 arch/powerpc/sysdev/xive/spapr.c                   |   1 +
 arch/riscv/boot/dts/starfive/jh7100.dtsi           |   2 +-
 arch/riscv/include/asm/cpu_ops.h                   |   1 +
 arch/riscv/kernel/cpu_ops.c                        |   4 +-
 arch/riscv/kernel/cpu_ops_spinwait.c               |   6 +-
 arch/riscv/kernel/crash_save_regs.S                |   2 +-
 arch/riscv/kernel/machine_kexec.c                  |  28 +-
 arch/riscv/kernel/probes/uprobes.c                 |   6 -
 arch/riscv/lib/uaccess.S                           |   4 +-
 arch/riscv/mm/init.c                               |   4 +
 arch/s390/include/asm/gmap.h                       |   2 +
 arch/s390/include/asm/kexec.h                      |   3 +
 arch/s390/include/asm/unwind.h                     |   2 +-
 arch/s390/kernel/crash_dump.c                      |   2 +-
 arch/s390/kernel/machine_kexec_file.c              |  18 +-
 arch/s390/kvm/intercept.c                          |  15 +
 arch/s390/kvm/pv.c                                 |   9 +-
 arch/s390/kvm/sigp.c                               |   4 +-
 arch/s390/mm/gmap.c                                |  86 +++
 arch/s390/mm/init.c                                |   4 +-
 arch/um/drivers/random.c                           |   2 +-
 arch/um/include/asm/archrandom.h                   |  30 +
 arch/um/include/asm/xor.h                          |   2 +-
 arch/um/include/shared/os.h                        |   7 +
 arch/um/kernel/um_arch.c                           |   8 +
 arch/um/os-Linux/util.c                            |   6 +
 arch/x86/Kconfig                                   |   1 +
 arch/x86/Kconfig.debug                             |   3 -
 arch/x86/boot/Makefile                             |   2 +-
 arch/x86/boot/compressed/Makefile                  |   4 +
 arch/x86/crypto/Makefile                           |   4 +-
 arch/x86/crypto/blake2s-glue.c                     |   3 +-
 arch/x86/crypto/blake2s-shash.c                    |  77 --
 arch/x86/entry/Makefile                            |   3 +-
 arch/x86/entry/thunk_32.S                          |   2 -
 arch/x86/entry/thunk_64.S                          |   4 -
 arch/x86/entry/vdso/Makefile                       |   2 +-
 arch/x86/events/intel/core.c                       |   7 +-
 arch/x86/events/intel/ds.c                         | 129 ++--
 arch/x86/events/perf_event.h                       |  14 +
 arch/x86/include/asm/kexec.h                       |   6 +
 arch/x86/include/asm/kvm_host.h                    |   3 +-
 arch/x86/kernel/cpu/bugs.c                         |  10 +-
 arch/x86/kernel/cpu/intel.c                        |  27 +-
 arch/x86/kernel/ftrace.c                           |   1 +
 arch/x86/kernel/kprobes/core.c                     |  18 +-
 arch/x86/kernel/pmem.c                             |   7 +-
 arch/x86/kernel/process.c                          |   9 +-
 arch/x86/kvm/emulate.c                             |  23 +-
 arch/x86/kvm/mmu.h                                 |   2 +
 arch/x86/kvm/mmu/mmu.c                             |   8 +-
 arch/x86/kvm/mmu/paging_tmpl.h                     |   9 +-
 arch/x86/kvm/mmu/spte.c                            |  22 +
 arch/x86/kvm/mmu/spte.h                            |   3 +-
 arch/x86/kvm/svm/nested.c                          |   3 +-
 arch/x86/kvm/svm/sev.c                             |  10 +
 arch/x86/kvm/svm/svm.c                             |  38 +-
 arch/x86/kvm/vmx/nested.c                          | 106 +--
 arch/x86/kvm/vmx/nested.h                          |   3 +-
 arch/x86/kvm/vmx/pmu_intel.c                       |  13 +-
 arch/x86/kvm/vmx/vmx.c                             |   4 +-
 arch/x86/kvm/vmx/vmx.h                             |  12 +
 arch/x86/kvm/x86.c                                 |  33 +-
 arch/x86/kvm/x86.h                                 |   2 +-
 arch/x86/kvm/xen.c                                 |  31 +-
 arch/x86/mm/extable.c                              |  16 +-
 arch/x86/mm/mem_encrypt_amd.c                      |   4 +-
 arch/x86/mm/numa.c                                 |   4 +-
 arch/x86/net/bpf_jit_comp.c                        |  31 +
 arch/x86/platform/olpc/olpc-xo1-sci.c              |   2 +-
 arch/x86/um/Makefile                               |   3 +-
 arch/x86/xen/enlighten_hvm.c                       |   4 +-
 arch/x86/xen/enlighten_pv.c                        |   5 +-
 arch/xtensa/platforms/iss/network.c                |  42 +-
 block/bio.c                                        |  99 +--
 block/blk-iocost.c                                 |  20 +-
 block/blk-iolatency.c                              |  18 +-
 block/blk-mq-debugfs.c                             |   3 +
 block/blk-rq-qos.h                                 |  11 +-
 block/blk-wbt.c                                    |  12 +-
 crypto/Kconfig                                     |  20 +-
 crypto/Makefile                                    |   1 -
 crypto/asymmetric_keys/public_key.c                |   7 +-
 crypto/blake2s_generic.c                           |  75 --
 crypto/tcrypt.c                                    |  12 -
 crypto/testmgr.c                                   |  24 -
 crypto/testmgr.h                                   | 217 ------
 drivers/acpi/acpi_lpss.c                           |   3 +
 drivers/acpi/apei/einj.c                           |   2 +
 drivers/acpi/bus.c                                 |   1 +
 drivers/acpi/cppc_acpi.c                           |  54 +-
 drivers/acpi/ec.c                                  |  82 +-
 drivers/acpi/processor_idle.c                      |   6 +-
 drivers/acpi/sleep.c                               |   8 +
 drivers/acpi/video_detect.c                        |   8 +
 drivers/acpi/viot.c                                |  26 +-
 drivers/android/binder.c                           | 114 ++-
 drivers/android/binder_alloc.c                     |  30 +-
 drivers/android/binder_alloc.h                     |   2 +-
 drivers/android/binder_alloc_selftest.c            |   2 +-
 drivers/android/binder_internal.h                  |  46 +-
 drivers/android/binderfs.c                         |  47 +-
 drivers/base/dd.c                                  |   5 +-
 drivers/base/node.c                                |   4 +-
 drivers/base/power/domain.c                        |   3 +
 drivers/base/topology.c                            |  32 +-
 drivers/block/mtip32xx/mtip32xx.c                  | 157 ++--
 drivers/block/mtip32xx/mtip32xx.h                  |   1 -
 drivers/block/nbd.c                                |   6 +-
 drivers/block/null_blk/main.c                      |  14 +-
 drivers/block/rnbd/rnbd-srv.c                      |   3 +-
 drivers/block/xen-blkback/xenbus.c                 |  20 +-
 drivers/block/xen-blkfront.c                       |   4 +-
 drivers/bluetooth/hci_intel.c                      |   6 +-
 drivers/bluetooth/hci_serdev.c                     |  11 +
 drivers/bus/hisi_lpc.c                             |  10 +-
 drivers/char/tpm/tpm2-cmd.c                        |   6 +
 drivers/clk/imx/clk-fracn-gppll.c                  |  33 +-
 drivers/clk/imx/clk-imx93.c                        |   4 +-
 drivers/clk/mediatek/reset.c                       |   4 +-
 drivers/clk/qcom/camcc-sdm845.c                    |   4 +
 drivers/clk/qcom/camcc-sm8250.c                    |  16 +-
 drivers/clk/qcom/clk-krait.c                       |   7 +-
 drivers/clk/qcom/clk-rcg2.c                        |  16 +-
 drivers/clk/qcom/dispcc-sm8250.c                   |   1 -
 drivers/clk/qcom/gcc-ipq8074.c                     |  60 +-
 drivers/clk/qcom/gcc-msm8939.c                     |  33 +-
 drivers/clk/qcom/gdsc.c                            |   8 +
 drivers/clk/qcom/videocc-sm8250.c                  |   4 -
 drivers/clk/renesas/r9a06g032-clocks.c             |   8 +-
 drivers/clk/renesas/rzg2l-cpg.c                    |   2 +-
 drivers/cpufreq/mediatek-cpufreq-hw.c              |   7 +-
 drivers/cpufreq/mediatek-cpufreq.c                 |   1 +
 drivers/cpufreq/scmi-cpufreq.c                     |   6 +
 .../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c    |   1 +
 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c  |  16 +-
 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c  |  10 +-
 drivers/crypto/ccp/sev-dev.c                       |  12 +-
 drivers/crypto/hisilicon/hpre/hpre_crypto.c        |   2 +-
 drivers/crypto/hisilicon/sec/sec_algs.c            |  14 +-
 drivers/crypto/hisilicon/sec/sec_drv.h             |   2 +-
 drivers/crypto/hisilicon/sec2/sec.h                |   2 +-
 drivers/crypto/hisilicon/sec2/sec_crypto.c         |  26 +-
 drivers/crypto/hisilicon/sec2/sec_crypto.h         |   1 +
 drivers/crypto/inside-secure/safexcel.c            |   2 +
 drivers/dma/dw-edma/dw-edma-core.c                 |   2 +-
 drivers/dma/dw/rzn1-dmamux.c                       |   3 +
 drivers/dma/imx-dma.c                              |   2 +-
 drivers/dma/sf-pdma/sf-pdma.c                      |  44 +-
 drivers/firmware/arm_scpi.c                        |  61 +-
 drivers/firmware/tegra/bpmp-debugfs.c              |  10 +-
 drivers/fpga/altera-pr-ip-core.c                   |   2 +-
 drivers/gpio/gpiolib-of.c                          |   4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c            |  60 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c      |  10 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c         |   4 +
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             |   7 +-
 drivers/gpu/drm/amd/amdgpu/nbio_v2_3.c             |  21 -
 drivers/gpu/drm/amd/amdgpu/nbio_v2_3.h             |   1 -
 drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c             |  21 -
 drivers/gpu/drm/amd/amdgpu/nbio_v7_4.h             |   1 -
 drivers/gpu/drm/amd/amdkfd/kfd_device.c            |   2 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |   2 +
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c  |   2 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link.c      |  17 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |  52 +-
 drivers/gpu/drm/amd/display/dc/dc.h                |   1 +
 .../amd/display/dc/dce110/dce110_hw_sequencer.c    |  23 +-
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c  |  13 +-
 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h  |   2 +-
 drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h       |   4 +-
 drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h        |   5 +
 .../drm/amd/display/dc/inc/hw_sequencer_private.h  |   2 +
 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c     |   2 +
 drivers/gpu/drm/bridge/Kconfig                     |   3 +
 drivers/gpu/drm/bridge/adv7511/adv7511.h           |  12 -
 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c       |  12 +
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c       |  24 +-
 drivers/gpu/drm/bridge/analogix/anx7625.c          |  21 +-
 drivers/gpu/drm/bridge/lontium-lt9611.c            |   2 +-
 drivers/gpu/drm/bridge/lontium-lt9611uxc.c         |   2 +-
 drivers/gpu/drm/bridge/sil-sii8620.c               |   4 +-
 drivers/gpu/drm/bridge/tc358767.c                  |  34 +-
 drivers/gpu/drm/display/Kconfig                    |   2 +-
 drivers/gpu/drm/display/drm_dp_aux_bus.c           |   4 +-
 drivers/gpu/drm/display/drm_dp_mst_topology.c      |   7 +-
 drivers/gpu/drm/drm_edid.c                         |   1 +
 drivers/gpu/drm/drm_fb_helper.c                    |  27 +-
 drivers/gpu/drm/drm_gem.c                          |   4 +-
 drivers/gpu/drm/drm_gem_shmem_helper.c             |   1 +
 drivers/gpu/drm/drm_mipi_dbi.c                     |   7 +
 drivers/gpu/drm/exynos/exynos7_drm_decon.c         |  17 +-
 drivers/gpu/drm/hyperv/hyperv_drm_modeset.c        |   2 +
 drivers/gpu/drm/i915/i915_gem.h                    |   4 -
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c          |  10 +-
 drivers/gpu/drm/ingenic/ingenic-drm.h              |   3 +
 drivers/gpu/drm/mcde/mcde_dsi.c                    |   1 +
 drivers/gpu/drm/mediatek/mtk_dpi.c                 |  33 +-
 drivers/gpu/drm/mediatek/mtk_dsi.c                 |  93 ++-
 drivers/gpu/drm/meson/meson_encoder_cvbs.c         |   1 +
 drivers/gpu/drm/meson/meson_encoder_hdmi.c         |  19 +-
 drivers/gpu/drm/mgag200/mgag200_mode.c             |  10 +
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c              |   8 -
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c              |  13 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |  12 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.h              |   3 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |   6 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |  36 +-
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c    |   6 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   6 +-
 drivers/gpu/drm/msm/disp/mdp5/mdp5_pipe.c          |   3 +-
 drivers/gpu/drm/msm/hdmi/hdmi.c                    |   3 +
 drivers/gpu/drm/msm/msm_fence.c                    |  11 +-
 drivers/gpu/drm/msm/msm_gpu.h                      |  11 +-
 drivers/gpu/drm/msm/msm_gpu_devfreq.c              |  39 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c        |   8 +-
 drivers/gpu/drm/nouveau/nouveau_display.c          |   4 +-
 drivers/gpu/drm/nouveau/nouveau_fbcon.c            |   2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c    |   2 +-
 drivers/gpu/drm/panel/Kconfig                      |   2 +
 drivers/gpu/drm/radeon/.gitignore                  |   2 +-
 drivers/gpu/drm/radeon/Kconfig                     |   2 +-
 drivers/gpu/drm/radeon/Makefile                    |   2 +-
 drivers/gpu/drm/radeon/ni_dpm.c                    |   6 +-
 drivers/gpu/drm/radeon/radeon_device.c             |   2 +-
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  10 +-
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |   3 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c       |   1 +
 drivers/gpu/drm/solomon/ssd130x-spi.c              |   2 +
 drivers/gpu/drm/tegra/gem.c                        |  11 +-
 drivers/gpu/drm/tiny/st7735r.c                     |   1 +
 drivers/gpu/drm/vc4/vc4_crtc.c                     |  14 +-
 drivers/gpu/drm/vc4/vc4_dsi.c                      | 152 +++-
 drivers/gpu/drm/vc4/vc4_hdmi.c                     | 169 ++++-
 drivers/gpu/drm/vc4/vc4_hdmi.h                     |   8 +
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h                |   7 +-
 drivers/gpu/drm/vc4/vc4_kms.c                      |   4 +-
 drivers/gpu/drm/vc4/vc4_plane.c                    |  30 +-
 drivers/gpu/drm/virtio/virtgpu_ioctl.c             |   6 +-
 drivers/gpu/drm/virtio/virtgpu_object.c            |   4 +-
 drivers/gpu/drm/vkms/vkms_composer.c               |   2 +-
 drivers/hid/amd-sfh-hid/amd_sfh_client.c           |   2 +
 drivers/hid/amd-sfh-hid/amd_sfh_hid.c              |  12 +-
 drivers/hid/amd-sfh-hid/amd_sfh_pcie.c             |   3 +-
 drivers/hid/hid-alps.c                             |   2 +
 drivers/hid/hid-cp2112.c                           |   5 +
 drivers/hid/hid-ids.h                              |   1 +
 drivers/hid/hid-input.c                            |   2 +
 drivers/hid/hid-mcp2221.c                          |   3 +
 drivers/hid/hid-nintendo.c                         |   1 +
 drivers/hid/wacom_sys.c                            |   2 +-
 drivers/hid/wacom_wac.c                            |  72 +-
 drivers/hwmon/dell-smm-hwmon.c                     |   8 +
 drivers/hwmon/drivetemp.c                          |   1 +
 drivers/hwmon/nct6775-core.c                       |   3 +-
 drivers/hwmon/nct6775-platform.c                   |   2 +-
 drivers/hwmon/nct6775.h                            |   2 +
 drivers/hwmon/sch56xx-common.c                     |  44 +-
 drivers/hwmon/sht15.c                              |  17 +-
 drivers/hwtracing/coresight/coresight-config.h     |   2 +
 drivers/hwtracing/coresight/coresight-core.c       |   1 +
 drivers/hwtracing/coresight/coresight-syscfg.c     | 295 +++++--
 drivers/hwtracing/coresight/coresight-syscfg.h     |  13 +
 drivers/hwtracing/intel_th/msu-sink.c              |   3 +
 drivers/hwtracing/intel_th/msu.c                   |  14 +-
 drivers/hwtracing/intel_th/pci.c                   |  25 +-
 drivers/i2c/busses/i2c-cadence.c                   |  10 +-
 drivers/i2c/busses/i2c-mxs.c                       |   2 +-
 drivers/i2c/busses/i2c-npcm7xx.c                   |  50 +-
 drivers/i2c/busses/i2c-qcom-geni.c                 |   2 +-
 drivers/i2c/i2c-core-base.c                        |   3 +-
 drivers/i2c/muxes/i2c-mux-gpmux.c                  |   1 +
 drivers/idle/intel_idle.c                          |  24 +-
 drivers/iio/accel/Kconfig                          |   2 +
 drivers/iio/accel/adxl313_core.c                   |   2 +-
 drivers/iio/accel/adxl355_core.c                   |   2 +-
 drivers/iio/accel/adxl367.c                        |   2 +-
 drivers/iio/accel/adxl367_spi.c                    |   8 +-
 drivers/iio/accel/bma220_spi.c                     |   2 +-
 drivers/iio/accel/bma400.h                         |  35 +-
 drivers/iio/accel/bma400_core.c                    | 250 +++++-
 drivers/iio/accel/bma400_i2c.c                     |  10 +-
 drivers/iio/accel/bma400_spi.c                     |   8 +-
 drivers/iio/accel/cros_ec_accel_legacy.c           |   4 +-
 drivers/iio/accel/sca3000.c                        |   4 +-
 drivers/iio/accel/sca3300.c                        |   2 +-
 drivers/iio/adc/ad7266.c                           |   4 +-
 drivers/iio/adc/ad7280a.c                          |   2 +-
 drivers/iio/adc/ad7292.c                           |   2 +-
 drivers/iio/adc/ad7298.c                           |   2 +-
 drivers/iio/adc/ad7476.c                           |   5 +-
 drivers/iio/adc/ad7606.h                           |   4 +-
 drivers/iio/adc/ad7766.c                           |   5 +-
 drivers/iio/adc/ad7768-1.c                         |   4 +-
 drivers/iio/adc/ad7887.c                           |   5 +-
 drivers/iio/adc/ad7923.c                           |   4 +-
 drivers/iio/adc/ad7949.c                           |   2 +-
 drivers/iio/adc/adi-axi-adc.c                      |   7 +-
 drivers/iio/adc/hi8435.c                           |   2 +-
 drivers/iio/adc/ltc2496.c                          |   4 +-
 drivers/iio/adc/ltc2497.c                          |   4 +-
 drivers/iio/adc/max1027.c                          |   8 +-
 drivers/iio/adc/max11100.c                         |   4 +-
 drivers/iio/adc/max1118.c                          |   2 +-
 drivers/iio/adc/max1241.c                          |   2 +-
 drivers/iio/adc/mcp320x.c                          |   2 +-
 drivers/iio/adc/ti-adc0832.c                       |   2 +-
 drivers/iio/adc/ti-adc084s021.c                    |   4 +-
 drivers/iio/adc/ti-adc108s102.c                    |   4 +-
 drivers/iio/adc/ti-adc12138.c                      |   2 +-
 drivers/iio/adc/ti-adc128s052.c                    |   2 +-
 drivers/iio/adc/ti-adc161s626.c                    |   2 +-
 drivers/iio/adc/ti-ads124s08.c                     |   2 +-
 drivers/iio/adc/ti-ads131e08.c                     |   2 +-
 drivers/iio/adc/ti-ads7950.c                       |   4 +-
 drivers/iio/adc/ti-ads8344.c                       |   2 +-
 drivers/iio/adc/ti-ads8688.c                       |   2 +-
 drivers/iio/adc/ti-tlc4541.c                       |   4 +-
 drivers/iio/addac/ad74413r.c                       |   4 +-
 drivers/iio/amplifiers/ad8366.c                    |   4 +-
 .../iio/common/cros_ec_sensors/cros_ec_lid_angle.c |   4 +-
 .../iio/common/cros_ec_sensors/cros_ec_sensors.c   |   6 +-
 .../common/cros_ec_sensors/cros_ec_sensors_core.c  |  58 +-
 drivers/iio/common/ssp_sensors/ssp.h               |   3 +-
 drivers/iio/dac/ad5064.c                           |   4 +-
 drivers/iio/dac/ad5360.c                           |   4 +-
 drivers/iio/dac/ad5421.c                           |   4 +-
 drivers/iio/dac/ad5449.c                           |   4 +-
 drivers/iio/dac/ad5504.c                           |   2 +-
 drivers/iio/dac/ad5592r-base.h                     |   4 +-
 drivers/iio/dac/ad5686.h                           |   6 +-
 drivers/iio/dac/ad5755.c                           |   4 +-
 drivers/iio/dac/ad5761.c                           |   4 +-
 drivers/iio/dac/ad5764.c                           |   4 +-
 drivers/iio/dac/ad5766.c                           |   2 +-
 drivers/iio/dac/ad5770r.c                          |   2 +-
 drivers/iio/dac/ad5791.c                           |   2 +-
 drivers/iio/dac/ad7293.c                           |   2 +-
 drivers/iio/dac/ad7303.c                           |   4 +-
 drivers/iio/dac/ad8801.c                           |   2 +-
 drivers/iio/dac/ltc2688.c                          |   4 +-
 drivers/iio/dac/mcp4922.c                          |   2 +-
 drivers/iio/dac/ti-dac082s085.c                    |   2 +-
 drivers/iio/dac/ti-dac5571.c                       |   2 +-
 drivers/iio/dac/ti-dac7311.c                       |   2 +-
 drivers/iio/dac/ti-dac7612.c                       |   4 +-
 drivers/iio/frequency/ad9523.c                     |   6 +-
 drivers/iio/frequency/adf4350.c                    |   6 +-
 drivers/iio/frequency/adf4371.c                    |   2 +-
 drivers/iio/frequency/admv1013.c                   |   2 +-
 drivers/iio/frequency/admv1014.c                   |   2 +-
 drivers/iio/frequency/admv4420.c                   |   2 +-
 drivers/iio/frequency/adrf6780.c                   |   2 +-
 drivers/iio/gyro/adis16080.c                       |   2 +-
 drivers/iio/gyro/adis16130.c                       |   2 +-
 drivers/iio/gyro/adxrs450.c                        |   2 +-
 drivers/iio/gyro/fxas21002c_core.c                 |   6 +-
 drivers/iio/imu/fxos8700_core.c                    |   2 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600.h        |   2 +-
 drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h |   2 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h          |   2 +-
 drivers/iio/industrialio-core.c                    |  22 +-
 drivers/iio/light/cros_ec_light_prox.c             |   6 +-
 drivers/iio/light/isl29028.c                       |   2 +-
 drivers/iio/potentiometer/ad5110.c                 |   4 +-
 drivers/iio/potentiometer/ad5272.c                 |   2 +-
 drivers/iio/potentiometer/max5481.c                |   2 +-
 drivers/iio/potentiometer/mcp41010.c               |   2 +-
 drivers/iio/potentiometer/mcp4131.c                |   2 +-
 drivers/iio/pressure/cros_ec_baro.c                |   6 +-
 drivers/iio/proximity/as3935.c                     |   2 +-
 drivers/iio/proximity/sx9324.c                     |   4 +-
 drivers/iio/resolver/ad2s1200.c                    |   2 +-
 drivers/iio/resolver/ad2s90.c                      |   2 +-
 drivers/iio/temperature/ltc2983.c                  |   4 +-
 drivers/iio/temperature/max31865.c                 |   2 +-
 drivers/iio/temperature/maxim_thermocouple.c       |   2 +-
 drivers/infiniband/hw/hfi1/file_ops.c              |   4 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c         |   4 +-
 drivers/infiniband/hw/irdma/cm.c                   |  11 +-
 drivers/infiniband/hw/irdma/hw.c                   |  15 +-
 drivers/infiniband/hw/irdma/verbs.c                |   2 +-
 drivers/infiniband/hw/mlx5/fs.c                    |   6 +-
 drivers/infiniband/hw/qedr/verbs.c                 |   8 +-
 drivers/infiniband/sw/rxe/rxe_comp.c               |   8 +-
 drivers/infiniband/sw/rxe/rxe_loc.h                |   2 +-
 drivers/infiniband/sw/rxe/rxe_mr.c                 |  12 +-
 drivers/infiniband/sw/rxe/rxe_mw.c                 |   7 -
 drivers/infiniband/sw/rxe/rxe_pool.c               |   4 +-
 drivers/infiniband/sw/rxe/rxe_qp.c                 |  23 +-
 drivers/infiniband/sw/rxe/rxe_req.c                |  23 +-
 drivers/infiniband/sw/rxe/rxe_resp.c               |  24 +-
 drivers/infiniband/sw/rxe/rxe_verbs.h              |   1 +
 drivers/infiniband/sw/siw/siw_cm.c                 |   7 +-
 drivers/infiniband/ulp/iser/iscsi_iser.c           |   4 +-
 drivers/infiniband/ulp/rtrs/rtrs-clt.c             |  35 +-
 drivers/infiniband/ulp/rtrs/rtrs-pri.h             |  21 +-
 drivers/infiniband/ulp/srpt/ib_srpt.c              | 148 +++-
 drivers/infiniband/ulp/srpt/ib_srpt.h              |  18 +-
 drivers/input/serio/gscps2.c                       |   4 +
 drivers/interconnect/imx/imx.c                     |   8 +-
 drivers/iommu/arm/arm-smmu/qcom_iommu.c            |   7 +-
 drivers/iommu/exynos-iommu.c                       |   6 +-
 drivers/iommu/intel/dmar.c                         |   2 +-
 drivers/irqchip/Kconfig                            |   5 +-
 drivers/irqchip/irq-mips-gic.c                     |  84 +-
 drivers/leds/rgb/leds-pwm-multicolor.c             |   3 +-
 drivers/md/dm-raid.c                               |   5 +-
 drivers/md/dm-thin-metadata.c                      |   7 +-
 drivers/md/dm-thin.c                               |   4 +-
 drivers/md/dm-writecache.c                         |  43 +-
 drivers/md/dm.c                                    |  18 +-
 drivers/md/md.c                                    |   2 +-
 drivers/md/raid10.c                                |   5 +-
 drivers/media/i2c/Kconfig                          |   1 +
 drivers/media/i2c/ov7251.c                         |   2 +
 drivers/media/pci/sta2x11/Kconfig                  |   2 +-
 drivers/media/pci/tw686x/tw686x-core.c             |  18 +-
 drivers/media/pci/tw686x/tw686x-video.c            |   4 +-
 drivers/media/platform/amphion/vdec.c              |  47 +-
 drivers/media/platform/amphion/vpu.h               |   1 +
 drivers/media/platform/amphion/vpu_core.c          |   7 +-
 drivers/media/platform/amphion/vpu_malone.c        |   4 +
 drivers/media/platform/amphion/vpu_msgs.c          |   7 +-
 drivers/media/platform/amphion/vpu_rpc.h           |   7 +-
 drivers/media/platform/amphion/vpu_v4l2.c          |   6 +-
 drivers/media/platform/atmel/atmel-sama7g5-isc.c   |   2 +
 drivers/media/platform/mediatek/mdp/mtk_mdp_ipi.h  |   2 +
 .../platform/mediatek/vcodec/mtk_vcodec_dec.c      |  73 +-
 .../platform/mediatek/vcodec/mtk_vcodec_dec_drv.c  |   5 +
 .../mediatek/vcodec/mtk_vcodec_dec_stateless.c     |   7 +
 .../platform/mediatek/vcodec/mtk_vcodec_drv.h      |   4 -
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.c  |   5 +
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h  |   9 +-
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c     | 264 +++----
 drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h     |   2 -
 drivers/media/platform/qcom/camss/camss-csid.c     |   2 +-
 .../media/platform/renesas/rcar-vin/rcar-core.c    |   2 +-
 drivers/media/usb/hdpvr/hdpvr-video.c              |   2 +-
 drivers/media/v4l2-core/v4l2-async.c               |  35 +-
 drivers/media/v4l2-core/v4l2-mem2mem.c             |   2 +-
 drivers/memstick/core/ms_block.c                   |  11 +-
 drivers/mfd/max77620.c                             |   2 +
 drivers/mfd/t7l66xb.c                              |   6 +-
 drivers/misc/cardreader/rtsx_pcr.c                 |   6 +-
 drivers/misc/eeprom/idt_89hpesx.c                  |   8 +-
 drivers/misc/habanalabs/common/memory.c            |   6 +-
 drivers/mmc/core/block.c                           |  28 +-
 drivers/mmc/core/quirks.h                          |   4 +-
 drivers/mmc/host/cavium-octeon.c                   |   1 +
 drivers/mmc/host/cavium-thunderx.c                 |   4 +-
 drivers/mmc/host/mxcmmc.c                          |   2 +-
 drivers/mmc/host/renesas_sdhi_core.c               |   8 +-
 drivers/mmc/host/sdhci-of-at91.c                   |   9 +-
 drivers/mmc/host/sdhci-of-esdhc.c                  |   1 +
 drivers/mtd/devices/mtd_dataflash.c                |   8 +
 drivers/mtd/devices/spear_smi.c                    |  10 +-
 drivers/mtd/devices/st_spi_fsm.c                   |  12 +-
 drivers/mtd/hyperbus/rpc-if.c                      |   8 +-
 drivers/mtd/maps/physmap-versatile.c               |   2 +
 drivers/mtd/nand/raw/arasan-nand-controller.c      |  16 +-
 drivers/mtd/nand/raw/meson_nand.c                  |   1 -
 drivers/mtd/parsers/ofpart_bcm4908.c               |   3 +
 drivers/mtd/parsers/redboot.c                      |   1 +
 drivers/mtd/sm_ftl.c                               |   2 +-
 drivers/mtd/spi-nor/core.c                         |   6 +-
 drivers/net/can/dev/netlink.c                      |   6 +-
 drivers/net/can/pch_can.c                          |   8 +-
 drivers/net/can/rcar/rcar_can.c                    |   8 +-
 drivers/net/can/sja1000/sja1000.c                  |   7 +-
 drivers/net/can/spi/hi311x.c                       |   5 +-
 drivers/net/can/sun4i_can.c                        |   9 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c  |  12 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c   |   6 +-
 drivers/net/can/usb/usb_8dev.c                     |   7 +-
 drivers/net/dsa/ocelot/Kconfig                     |   1 +
 drivers/net/dsa/ocelot/felix.c                     |   9 +
 drivers/net/dsa/ocelot/felix.h                     |   1 +
 drivers/net/dsa/ocelot/felix_vsc9959.c             | 300 +++++++-
 drivers/net/ethernet/atheros/ag71xx.c              |   2 +-
 drivers/net/ethernet/huawei/hinic/hinic_dev.h      |   3 -
 drivers/net/ethernet/huawei/hinic/hinic_main.c     |  68 +-
 drivers/net/ethernet/huawei/hinic/hinic_rx.c       |   2 -
 drivers/net/ethernet/huawei/hinic/hinic_tx.c       |   2 -
 drivers/net/ethernet/intel/iavf/iavf.h             |   6 +
 drivers/net/ethernet/intel/iavf/iavf_main.c        |  46 +-
 drivers/net/ethernet/intel/ice/ice_main.c          |   2 +-
 drivers/net/ethernet/intel/ice/ice_switch.c        |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |  21 +-
 .../net/ethernet/mellanox/mlx5/core/en/params.c    |  12 +
 .../ethernet/mellanox/mlx5/core/en/tc/post_act.c   |   1 +
 .../net/ethernet/mellanox/mlx5/core/en/xsk/rx.h    |  14 +
 .../ethernet/mellanox/mlx5/core/en_accel/ktls.c    |   2 +-
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |  23 +-
 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c |  11 +-
 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.h |   1 -
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |   4 +-
 .../ethernet/mellanox/mlx5/core/steering/dr_dbg.c  |  13 +-
 drivers/net/ethernet/mscc/ocelot.c                 |   1 +
 drivers/net/ethernet/mscc/ocelot_ptp.c             |   8 +
 drivers/net/ethernet/pensando/ionic/ionic_lif.c    |   2 +-
 drivers/net/netdevsim/bpf.c                        |   8 +-
 drivers/net/netdevsim/fib.c                        |  27 +-
 drivers/net/usb/Kconfig                            |   3 +-
 drivers/net/usb/ax88179_178a.c                     |  26 +-
 drivers/net/usb/smsc95xx.c                         |  26 +-
 drivers/net/usb/usbnet.c                           |   8 +-
 drivers/net/wireguard/allowedips.c                 |   9 +-
 drivers/net/wireguard/selftest/allowedips.c        |   6 +-
 drivers/net/wireguard/selftest/ratelimiter.c       |  25 +-
 drivers/net/wireless/ath/ath10k/htt_rx.c           |   2 +-
 drivers/net/wireless/ath/ath10k/mac.c              |   8 +-
 drivers/net/wireless/ath/ath10k/snoc.c             |   5 +-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c          |   2 +-
 drivers/net/wireless/ath/ath10k/wmi.c              |   2 +-
 drivers/net/wireless/ath/ath11k/ahb.c              |  56 +-
 drivers/net/wireless/ath/ath11k/core.c             |  30 +-
 drivers/net/wireless/ath/ath11k/debug.h            |   4 +-
 drivers/net/wireless/ath/ath11k/dp_rx.c            |   5 +-
 drivers/net/wireless/ath/ath11k/htc.c              |   4 +-
 drivers/net/wireless/ath/ath11k/hw.h               |   2 -
 drivers/net/wireless/ath/ath11k/mac.c              |  25 +-
 drivers/net/wireless/ath/ath11k/pci.c              |  72 +-
 drivers/net/wireless/ath/ath11k/pcic.c             |  57 +-
 drivers/net/wireless/ath/ath11k/pcic.h             |   2 +
 drivers/net/wireless/ath/ath11k/wmi.c              |   4 +-
 drivers/net/wireless/ath/ath6kl/cfg80211.c         |   6 +-
 drivers/net/wireless/ath/ath9k/beacon.c            |   2 +-
 drivers/net/wireless/ath/ath9k/htc.h               |  10 +-
 drivers/net/wireless/ath/ath9k/htc_drv_beacon.c    |   2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c      |   3 +-
 drivers/net/wireless/ath/wil6210/cfg80211.c        |   9 +-
 drivers/net/wireless/ath/wil6210/debugfs.c         |  18 +-
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |   4 +-
 drivers/net/wireless/intel/iwlegacy/4965-rs.c      |   5 +-
 drivers/net/wireless/intel/iwlwifi/mvm/coex.c      |   6 +-
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c        |   2 +-
 .../net/wireless/intel/iwlwifi/mvm/debugfs-vif.c   |   4 +-
 .../net/wireless/intel/iwlwifi/mvm/ftm-responder.c |   4 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c  |  10 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  10 +-
 drivers/net/wireless/intel/iwlwifi/mvm/power.c     |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c        |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c       |   1 +
 drivers/net/wireless/intel/iwlwifi/mvm/tdls.c      |   4 +-
 .../net/wireless/intel/iwlwifi/mvm/time-event.c    |   4 +-
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c        |   2 +-
 drivers/net/wireless/intersil/p54/main.c           |   2 +-
 drivers/net/wireless/intersil/p54/p54spi.c         |   3 +-
 drivers/net/wireless/mac80211_hwsim.c              |  36 +-
 drivers/net/wireless/marvell/libertas/if_usb.c     |   1 +
 drivers/net/wireless/marvell/libertas/mesh.c       |  10 +-
 drivers/net/wireless/marvell/mwifiex/11h.c         |   2 +-
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    |  18 +-
 drivers/net/wireless/mediatek/mt76/eeprom.c        |   5 +-
 drivers/net/wireless/mediatek/mt76/mac80211.c      |   5 +-
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c    |   7 +-
 drivers/net/wireless/mediatek/mt76/mt7615/main.c   |  21 -
 drivers/net/wireless/mediatek/mt76/mt7615/mcu.c    |  14 +-
 drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h |   1 -
 drivers/net/wireless/mediatek/mt76/mt76_connac.h   |   6 +
 .../net/wireless/mediatek/mt76/mt76_connac2_mac.h  | 167 ++++
 .../net/wireless/mediatek/mt76/mt76_connac_mac.c   | 284 +++++++
 .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c   |   2 +-
 .../net/wireless/mediatek/mt76/mt7915/debugfs.c    |   5 +-
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c    | 260 +------
 drivers/net/wireless/mediatek/mt76/mt7915/mac.h    | 142 +---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c    |  16 +-
 drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h |  17 +-
 .../net/wireless/mediatek/mt76/mt7915/testmode.c   |   9 +-
 drivers/net/wireless/mediatek/mt76/mt7921/init.c   |   6 +-
 drivers/net/wireless/mediatek/mt76/mt7921/mac.c    | 213 +-----
 drivers/net/wireless/mediatek/mt76/mt7921/mac.h    | 123 +--
 drivers/net/wireless/mediatek/mt76/mt7921/main.c   |   2 +-
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c    |  25 +-
 drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h |  15 -
 .../net/wireless/mediatek/mt76/mt7921/pci_mac.c    |   4 +-
 .../net/wireless/mediatek/mt76/mt7921/pci_mcu.c    |   6 +-
 .../net/wireless/mediatek/mt76/mt7921/sdio_mcu.c   |  10 +-
 drivers/net/wireless/microchip/wilc1000/cfg80211.c |   3 +-
 drivers/net/wireless/microchip/wilc1000/spi.c      |   6 +-
 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c  |  14 +-
 drivers/net/wireless/quantenna/qtnfmac/commands.c  |   2 +-
 drivers/net/wireless/quantenna/qtnfmac/event.c     |  15 +-
 drivers/net/wireless/realtek/rtlwifi/debug.c       |   8 +-
 drivers/net/wireless/realtek/rtw88/main.c          |   4 +
 drivers/net/wireless/realtek/rtw89/rtw8852a_rfk.c  |   4 +-
 drivers/net/wireless/ti/wlcore/main.c              |   2 +-
 drivers/nvme/host/core.c                           |  14 +-
 drivers/nvme/host/multipath.c                      |   1 +
 drivers/nvme/host/trace.h                          |   2 +-
 drivers/of/device.c                                |   5 +-
 drivers/of/fdt.c                                   |   2 +-
 drivers/of/kexec.c                                 |  17 +
 drivers/opp/core.c                                 |   4 +-
 drivers/opp/of.c                                   |  15 +-
 drivers/parisc/lba_pci.c                           |   6 +-
 drivers/pci/controller/dwc/pcie-designware-ep.c    |  18 +-
 drivers/pci/controller/dwc/pcie-designware-host.c  |  30 +-
 drivers/pci/controller/dwc/pcie-designware.c       |  46 +-
 drivers/pci/controller/dwc/pcie-qcom.c             |  58 +-
 drivers/pci/controller/dwc/pcie-tegra194.c         |  49 +-
 drivers/pci/controller/pcie-mediatek-gen3.c        |   7 +-
 drivers/pci/controller/pcie-microchip-host.c       |   2 +
 drivers/pci/endpoint/functions/pci-epf-test.c      |   1 -
 drivers/pci/pcie/aer.c                             |   7 +-
 drivers/pci/pcie/portdrv_core.c                    |   9 +-
 drivers/perf/arm_spe_pmu.c                         |  22 +-
 drivers/perf/riscv_pmu.c                           |   1 -
 drivers/perf/riscv_pmu_sbi.c                       |  21 +-
 drivers/phy/qualcomm/phy-qcom-qmp.h                |   3 +-
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c      |  10 +-
 drivers/phy/samsung/phy-exynosautov9-ufs.c         |  18 +-
 drivers/phy/st/phy-stm32-usbphyc.c                 |   4 +-
 drivers/phy/ti/phy-tusb1210.c                      |   5 +-
 drivers/platform/chrome/cros_ec.c                  |   8 +-
 drivers/platform/mellanox/mlxreg-lc.c              |  82 +-
 drivers/platform/olpc/olpc-ec.c                    |   2 +-
 drivers/platform/x86/pmc_atom.c                    |  19 +-
 drivers/powercap/dtpm_cpu.c                        |   5 +-
 drivers/pwm/pwm-lpc18xx-sct.c                      |  55 +-
 drivers/pwm/pwm-sifive.c                           |  61 +-
 drivers/regulator/of_regulator.c                   |   6 +-
 drivers/regulator/qcom_smd-regulator.c             |   4 +-
 drivers/remoteproc/imx_rproc.c                     |   7 +-
 drivers/remoteproc/qcom_q6v5_pas.c                 |   3 +
 drivers/remoteproc/qcom_sysmon.c                   |  10 +
 drivers/remoteproc/qcom_wcnss.c                    |  10 +-
 drivers/remoteproc/ti_k3_r5_remoteproc.c           |   2 +
 drivers/rpmsg/mtk_rpmsg.c                          |   2 +
 drivers/rpmsg/qcom_smd.c                           |   1 +
 drivers/rpmsg/rpmsg_char.c                         |   7 +-
 drivers/rpmsg/rpmsg_core.c                         |   1 +
 drivers/rtc/rtc-rx8025.c                           |  22 +-
 drivers/s390/char/zcore.c                          |  11 +-
 drivers/s390/cio/vfio_ccw_drv.c                    |  24 +-
 drivers/s390/cio/vfio_ccw_fsm.c                    |  26 +-
 drivers/s390/cio/vfio_ccw_ops.c                    |  10 +-
 drivers/s390/scsi/zfcp_fc.c                        |  29 +-
 drivers/s390/scsi/zfcp_fc.h                        |   6 +-
 drivers/s390/scsi/zfcp_fsf.c                       |   4 +-
 drivers/scsi/be2iscsi/be_main.c                    |   2 +-
 drivers/scsi/bnx2i/bnx2i_iscsi.c                   |   2 +-
 drivers/scsi/cxgbi/libcxgbi.c                      |   2 +-
 drivers/scsi/iscsi_tcp.c                           |   4 +-
 drivers/scsi/libiscsi.c                            |   9 +-
 drivers/scsi/lpfc/lpfc.h                           |   1 -
 drivers/scsi/lpfc/lpfc_els.c                       |   8 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c                   |   3 +-
 drivers/scsi/lpfc/lpfc_scsi.c                      |   1 -
 drivers/scsi/qedi/qedi_main.c                      |   9 +-
 drivers/scsi/qla2xxx/qla_attr.c                    |  24 +-
 drivers/scsi/qla2xxx/qla_bsg.c                     |  10 +-
 drivers/scsi/qla2xxx/qla_dbg.h                     |   2 +-
 drivers/scsi/qla2xxx/qla_def.h                     |  18 +-
 drivers/scsi/qla2xxx/qla_edif.c                    | 502 +++++++++---
 drivers/scsi/qla2xxx/qla_edif.h                    |   7 +-
 drivers/scsi/qla2xxx/qla_edif_bsg.h                | 106 ++-
 drivers/scsi/qla2xxx/qla_fw.h                      |   2 +-
 drivers/scsi/qla2xxx/qla_gbl.h                     |   6 +-
 drivers/scsi/qla2xxx/qla_gs.c                      | 129 +++-
 drivers/scsi/qla2xxx/qla_init.c                    |  93 ++-
 drivers/scsi/qla2xxx/qla_iocb.c                    |   5 +-
 drivers/scsi/qla2xxx/qla_isr.c                     |  25 +-
 drivers/scsi/qla2xxx/qla_mbx.c                     |  19 +-
 drivers/scsi/qla2xxx/qla_mid.c                     |   6 +-
 drivers/scsi/qla2xxx/qla_nvme.c                    |   5 -
 drivers/scsi/qla2xxx/qla_os.c                      |  93 ++-
 drivers/scsi/qla2xxx/qla_target.c                  |  35 +-
 drivers/scsi/scsi_transport_iscsi.c                |  66 +-
 drivers/scsi/sd.c                                  |  84 +-
 drivers/scsi/sd.h                                  |   5 +
 drivers/scsi/sg.c                                  |  53 +-
 drivers/scsi/smartpqi/smartpqi_init.c              |   4 +-
 drivers/soc/amlogic/meson-mx-socinfo.c             |   1 +
 drivers/soc/amlogic/meson-secure-pwrc.c            |   4 +-
 drivers/soc/fsl/guts.c                             |   2 +-
 drivers/soc/qcom/Kconfig                           |   1 +
 drivers/soc/qcom/ocmem.c                           |   3 +
 drivers/soc/qcom/qcom_aoss.c                       |   4 +-
 drivers/soc/qcom/socinfo.c                         |   3 +-
 drivers/soc/renesas/r8a779a0-sysc.c                |  10 +-
 drivers/soundwire/bus.c                            |  75 +-
 drivers/soundwire/bus_type.c                       |  38 +-
 drivers/soundwire/qcom.c                           |   4 +
 drivers/soundwire/slave.c                          |   3 +-
 drivers/soundwire/stream.c                         |  53 +-
 drivers/spi/spi-altera-dfl.c                       |  14 +-
 drivers/spi/spi-dw.h                               |   2 +-
 drivers/spi/spi-s3c64xx.c                          |   2 +-
 drivers/spi/spi-synquacer.c                        |   1 +
 drivers/spi/spi-tegra20-slink.c                    |   3 +-
 drivers/spi/spi.c                                  |  21 +-
 drivers/staging/fbtft/fbtft-core.c                 |   2 +-
 drivers/staging/media/atomisp/pci/atomisp_cmd.c    |  57 +-
 .../media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c |   4 +-
 drivers/staging/media/hantro/hantro_g2_hevc_dec.c  |   7 +-
 drivers/staging/media/hantro/hantro_g2_regs.h      |   2 +-
 drivers/staging/media/hantro/hantro_hevc.c         |  25 +-
 drivers/staging/media/hantro/hantro_hw.h           |  17 +-
 drivers/staging/media/hantro/hantro_v4l2.c         |   2 +-
 drivers/staging/media/hantro/imx8m_vpu_hw.c        |  80 +-
 drivers/staging/media/hantro/rockchip_vpu_hw.c     | 164 ++--
 drivers/staging/media/hantro/sama5d4_vdec_hw.c     |  40 +-
 drivers/staging/media/hantro/sunxi_vpu_hw.c        |  24 +-
 drivers/staging/media/sunxi/cedrus/cedrus_h265.c   |  36 +-
 drivers/staging/media/sunxi/cedrus/cedrus_regs.h   |   3 +-
 drivers/staging/rtl8192u/r8192U.h                  |   2 +-
 drivers/staging/rtl8192u/r8192U_dm.c               |  38 +-
 drivers/staging/rtl8192u/r8192U_dm.h               |   2 +-
 drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c  |   4 +-
 drivers/thermal/cpufreq_cooling.c                  |  13 +-
 drivers/thermal/devfreq_cooling.c                  |  19 +-
 drivers/thermal/thermal_sysfs.c                    |  10 +-
 drivers/tty/n_gsm.c                                | 757 ++++++++++++------
 drivers/tty/serial/8250/8250.h                     |  20 +
 drivers/tty/serial/8250/8250_bcm2835aux.c          |   6 +-
 drivers/tty/serial/8250/8250_bcm7271.c             |  24 +-
 drivers/tty/serial/8250/8250_core.c                |   3 +-
 drivers/tty/serial/8250/8250_dw.c                  |  10 +-
 drivers/tty/serial/8250/8250_fsl.c                 |   2 +-
 drivers/tty/serial/8250/8250_pci.c                 | 109 +++
 drivers/tty/serial/8250/8250_port.c                |  17 +-
 drivers/tty/serial/fsl_lpuart.c                    |  12 +-
 drivers/tty/serial/mvebu-uart.c                    |  11 +
 drivers/tty/serial/pic32_uart.c                    |   4 +-
 drivers/tty/serial/qcom_geni_serial.c              |  88 ++-
 drivers/tty/vt/vt.c                                |   2 +-
 drivers/ufs/core/ufshcd.c                          |   6 +-
 drivers/usb/cdns3/cdns3-gadget.c                   |  13 +-
 drivers/usb/core/hcd.c                             |  34 +-
 drivers/usb/dwc3/core.c                            |   9 +-
 drivers/usb/dwc3/dwc3-qcom.c                       |   4 +-
 drivers/usb/dwc3/gadget.c                          |  92 +--
 drivers/usb/gadget/function/f_mass_storage.c       |  11 +-
 drivers/usb/gadget/function/f_uvc.c                |  30 +-
 drivers/usb/gadget/function/uvc_queue.c            |   6 +-
 drivers/usb/gadget/function/uvc_video.c            |  12 +-
 drivers/usb/gadget/udc/Kconfig                     |   2 +-
 drivers/usb/gadget/udc/aspeed-vhub/hub.c           |   4 +-
 drivers/usb/gadget/udc/core.c                      |  11 +-
 drivers/usb/gadget/udc/tegra-xudc.c                |   8 +-
 drivers/usb/host/ehci-ppc-of.c                     |   1 +
 drivers/usb/host/ohci-at91.c                       |  69 +-
 drivers/usb/host/ohci-nxp.c                        |   1 +
 drivers/usb/host/xhci-tegra.c                      |   8 +-
 drivers/usb/host/xhci.h                            |   2 +-
 drivers/usb/serial/sierra.c                        |   3 +-
 drivers/usb/serial/usb-serial.c                    |   2 +-
 drivers/usb/serial/usb_wwan.c                      |   3 +-
 drivers/usb/typec/ucsi/ucsi.c                      |   4 +
 drivers/usb/usbip/vudc_sysfs.c                     |  14 +-
 drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c     |  11 +-
 drivers/vfio/pci/mlx5/cmd.c                        |  14 +-
 drivers/vfio/pci/mlx5/cmd.h                        |   4 +-
 drivers/vfio/pci/mlx5/main.c                       |  11 +-
 drivers/vfio/pci/vfio_pci_core.c                   |   7 +
 drivers/vfio/vfio.c                                |  11 +-
 drivers/video/fbdev/amba-clcd.c                    |  24 +-
 drivers/video/fbdev/arkfb.c                        |   9 +-
 drivers/video/fbdev/core/fbcon.c                   |  12 +-
 drivers/video/fbdev/offb.c                         |   1 +
 drivers/video/fbdev/s3fb.c                         |   2 +
 drivers/video/fbdev/sis/init.c                     |   4 +-
 drivers/video/fbdev/vt8623fb.c                     |   2 +
 drivers/virtio/Kconfig                             |   4 +
 drivers/virtio/Makefile                            |   1 +
 drivers/virtio/virtio.c                            |   4 +-
 drivers/virtio/virtio_anchor.c                     |  18 +
 drivers/watchdog/armada_37xx_wdt.c                 |   2 +
 drivers/watchdog/f71808e_wdt.c                     |   4 +-
 drivers/watchdog/sp5100_tco.c                      |   1 +
 drivers/xen/Kconfig                                |   9 +
 drivers/xen/grant-dma-ops.c                        |  10 +
 fs/Makefile                                        |   2 -
 fs/attr.c                                          |   2 +
 fs/btrfs/block-group.c                             |  29 +-
 fs/btrfs/ctree.h                                   |  34 +-
 fs/btrfs/delalloc-space.c                          |   6 +-
 fs/btrfs/disk-io.c                                 |  38 +-
 fs/btrfs/extent-tree.c                             |  71 +-
 fs/btrfs/extent_io.c                               |   4 +-
 fs/btrfs/file.c                                    |   2 +-
 fs/btrfs/inode.c                                   | 177 ++++-
 fs/btrfs/raid56.c                                  |  26 +-
 fs/btrfs/space-info.c                              | 108 ++-
 fs/btrfs/space-info.h                              |   8 +-
 fs/btrfs/tree-log.c                                |  27 +-
 fs/btrfs/tree-log.h                                |   3 +
 fs/btrfs/volumes.c                                 |  28 +-
 fs/btrfs/zoned.c                                   | 125 +++
 fs/btrfs/zoned.h                                   |  18 +
 fs/cifs/cifsglob.h                                 |   4 +-
 fs/cifs/file.c                                     |  34 +-
 fs/erofs/decompressor.c                            |  16 +-
 fs/erofs/decompressor_lzma.c                       |   1 +
 fs/erofs/dir.c                                     |  16 +-
 fs/eventpoll.c                                     |  22 +
 fs/exec.c                                          |   3 +
 fs/ext2/super.c                                    |  12 +-
 fs/ext4/ext4.h                                     |   1 +
 fs/ext4/inline.c                                   |  33 +
 fs/ext4/inode.c                                    |  24 +-
 fs/ext4/migrate.c                                  |   4 +-
 fs/ext4/namei.c                                    |  23 +
 fs/ext4/resize.c                                   |   1 +
 fs/ext4/symlink.c                                  |  15 +
 fs/ext4/xattr.c                                    | 168 ++--
 fs/ext4/xattr.h                                    |  14 +
 fs/f2fs/data.c                                     |   7 +-
 fs/f2fs/f2fs.h                                     |   2 +-
 fs/f2fs/file.c                                     |  19 +-
 fs/fuse/control.c                                  |   4 +-
 fs/fuse/dir.c                                      |   7 +-
 fs/fuse/file.c                                     |  39 +-
 fs/fuse/inode.c                                    |   6 +
 fs/fuse/ioctl.c                                    |  15 +-
 fs/jbd2/commit.c                                   |   2 +-
 fs/jbd2/transaction.c                              |  14 +-
 fs/kernfs/dir.c                                    |   7 +-
 fs/ksmbd/smb2misc.c                                |  12 +-
 fs/ksmbd/smb2pdu.c                                 |  52 +-
 fs/ksmbd/smbacl.c                                  | 130 +++-
 fs/ksmbd/smbacl.h                                  |   2 +-
 fs/ksmbd/vfs.c                                     |   5 +
 fs/lockd/svc4proc.c                                |   8 +
 fs/lockd/xdr4.c                                    |  19 +-
 fs/mbcache.c                                       |  76 +-
 fs/namei.c                                         |   4 +
 fs/nfs/flexfilelayout/flexfilelayout.c             |   4 +
 fs/nfs/nfs3client.c                                |   1 -
 fs/nfsd/filecache.c                                |  22 +-
 fs/nfsd/filecache.h                                |   4 +-
 fs/nfsd/trace.h                                    |   2 -
 fs/overlayfs/export.c                              |   2 +-
 fs/proc/base.c                                     |  46 +-
 fs/splice.c                                        |  10 +-
 include/acpi/cppc_acpi.h                           |   2 +-
 include/crypto/internal/blake2s.h                  | 108 ---
 include/dt-bindings/clock/qcom,gcc-msm8939.h       |   1 +
 include/linux/acpi_viot.h                          |   2 +
 include/linux/blkdev.h                             |   5 +
 include/linux/bpf.h                                |   1 -
 include/linux/buffer_head.h                        |  25 +-
 include/linux/cpumask.h                            |  18 +
 include/linux/device-mapper.h                      |   6 +
 include/linux/energy_model.h                       |  54 +-
 include/linux/filter.h                             |   9 +
 include/linux/hugetlb.h                            |   6 +-
 include/linux/ieee80211.h                          |   3 +
 include/linux/iio/common/cros_ec_sensors_core.h    |   7 +-
 include/linux/iio/iio.h                            |  10 +-
 include/linux/kexec.h                              |  45 +-
 include/linux/kfifo.h                              |   2 +-
 include/linux/kvm_types.h                          |   2 +
 include/linux/lockd/xdr.h                          |   2 +
 include/linux/lockdep.h                            |  30 +-
 include/linux/mbcache.h                            |  10 +-
 include/linux/mdev.h                               |   5 -
 include/linux/mfd/t7l66xb.h                        |   1 -
 include/linux/once_lite.h                          |  20 +-
 include/linux/pipe_fs_i.h                          |   9 +
 include/linux/platform-feature.h                   |   6 +-
 include/linux/rmap.h                               |   4 +-
 include/linux/sched.h                              |   2 +-
 include/linux/sched/rt.h                           |   8 -
 include/linux/sched/topology.h                     |   1 +
 include/linux/soundwire/sdw.h                      |   6 +-
 include/linux/swapops.h                            |  12 +-
 include/linux/tpm_eventlog.h                       |   2 +-
 include/linux/trace_events.h                       |  18 +
 include/linux/usb/hcd.h                            |   1 +
 include/linux/vfio.h                               |  30 +-
 include/linux/virtio_anchor.h                      |  19 +
 include/linux/wait.h                               |   9 +-
 include/media/hevc-ctrls.h                         |   4 +-
 include/net/9p/client.h                            |   8 +-
 include/net/ax25.h                                 |   1 +
 include/net/bluetooth/hci.h                        |   1 +
 include/net/cfg80211.h                             |  99 ++-
 include/net/inet6_hashtables.h                     |   7 +-
 include/net/inet_hashtables.h                      |  19 +-
 include/net/inet_sock.h                            |  11 +
 include/net/ip_tunnels.h                           |   1 +
 include/net/mac80211.h                             |  40 +-
 include/net/netfilter/nf_tables.h                  |   9 +-
 include/net/pkt_sched.h                            |  17 +
 include/net/raw.h                                  |  16 +-
 include/net/rawv6.h                                |   7 +-
 include/net/sock.h                                 |  12 +-
 include/net/xdp_sock_drv.h                         |  11 +
 include/scsi/libiscsi.h                            |   2 +-
 include/scsi/scsi_transport_iscsi.h                |   1 +
 include/soc/mscc/ocelot.h                          |   6 +
 include/trace/events/io_uring.h                    |   2 +-
 include/trace/events/spmi.h                        |  12 +-
 include/trace/stages/stage1_struct_define.h        |   3 +
 include/trace/stages/stage2_data_offsets.h         |   3 +
 include/trace/stages/stage4_event_fields.h         |  11 +-
 include/trace/stages/stage5_get_offsets.h          |   4 +
 include/trace/stages/stage6_event_callback.h       |  12 +
 include/uapi/linux/can/error.h                     |   5 +-
 include/uapi/linux/dm-ioctl.h                      |   4 +-
 include/uapi/linux/netfilter/xt_IDLETIMER.h        |  17 +-
 include/uapi/linux/nl80211.h                       |  28 +
 include/xen/xen-ops.h                              |   9 +
 include/xen/xen.h                                  |   8 -
 init/main.c                                        |   1 +
 io_uring/Makefile                                  |   6 +
 {fs => io_uring}/io-wq.c                           |   0
 {fs => io_uring}/io-wq.h                           |   0
 {fs => io_uring}/io_uring.c                        | 844 +++++++++------------
 kernel/bpf/arraymap.c                              |  20 +-
 kernel/bpf/cgroup.c                                |  70 +-
 kernel/bpf/core.c                                  |  35 +-
 kernel/bpf/verifier.c                              |   7 +-
 kernel/cgroup/cpuset.c                             |   2 +-
 kernel/dma/swiotlb.c                               |   2 +-
 kernel/irq/Kconfig                                 |   1 +
 kernel/irq/chip.c                                  |   3 +-
 kernel/irq/irqdomain.c                             |   2 +
 kernel/kexec_file.c                                |  66 +-
 kernel/kprobes.c                                   |   3 +-
 kernel/locking/lockdep.c                           |   7 +-
 kernel/power/energy_model.c                        |  24 +-
 kernel/power/user.c                                |  13 +-
 kernel/profile.c                                   |   7 +
 kernel/rcu/rcutorture.c                            |  28 +-
 kernel/sched/core.c                                | 190 +++--
 kernel/sched/fair.c                                | 142 +++-
 kernel/sched/features.h                            |   3 +-
 kernel/sched/rt.c                                  |  15 +-
 kernel/sched/sched.h                               |   1 -
 kernel/smp.c                                       |   4 +-
 kernel/time/hrtimer.c                              |   1 +
 kernel/time/timekeeping.c                          |   7 +-
 kernel/trace/blktrace.c                            |   2 +-
 lib/bitmap.c                                       |   2 +-
 lib/crypto/blake2s-selftest.c                      |  41 +
 lib/crypto/blake2s.c                               |  37 +-
 lib/iov_iter.c                                     |  15 +-
 lib/kunit/executor.c                               |   4 +-
 lib/livepatch/test_klp_callbacks_busy.c            |   8 +
 lib/overflow_kunit.c                               |   6 +
 lib/smp_processor_id.c                             |   2 +-
 lib/test_bpf.c                                     |   4 +-
 lib/test_hmm.c                                     |  10 +-
 lib/test_kasan.c                                   |  10 +
 mm/damon/reclaim.c                                 |   4 +-
 mm/gup.c                                           |   2 +-
 mm/huge_memory.c                                   |  11 +-
 mm/hugetlb.c                                       |  15 +-
 mm/hugetlb_cgroup.c                                |   1 +
 mm/kasan/hw_tags.c                                 |  32 +-
 mm/memory-failure.c                                |   2 +-
 mm/memory_hotplug.c                                |   2 +-
 mm/mempolicy.c                                     |   4 +-
 mm/memremap.c                                      |   2 +-
 mm/migrate.c                                       |  30 +-
 mm/mmap.c                                          |   1 -
 mm/percpu.c                                        |   6 +-
 mm/usercopy.c                                      |   2 +-
 mm/vmalloc.c                                       |  10 +-
 net/9p/client.c                                    |  36 +-
 net/9p/trans_fd.c                                  |  13 +-
 net/9p/trans_rdma.c                                |   2 +-
 net/9p/trans_virtio.c                              |   4 +-
 net/9p/trans_xen.c                                 |   2 +-
 net/ax25/af_ax25.c                                 |   4 +-
 net/batman-adv/trace.h                             |   9 +-
 net/bluetooth/hci_core.c                           |  10 +-
 net/bluetooth/hci_event.c                          |   5 +-
 net/bluetooth/hci_sync.c                           |   8 +-
 net/bluetooth/l2cap_core.c                         |  13 +-
 net/bluetooth/mgmt.c                               |  10 +-
 net/core/filter.c                                  |   3 +-
 net/core/skmsg.c                                   |   4 +-
 net/dccp/proto.c                                   |  10 +-
 net/ipv4/af_inet.c                                 |   2 +
 net/ipv4/ping.c                                    |  36 +-
 net/ipv4/raw.c                                     | 164 ++--
 net/ipv4/raw_diag.c                                |  53 +-
 net/ipv4/tcp.c                                     |  33 +-
 net/ipv4/tcp_output.c                              |  30 +-
 net/ipv6/af_inet6.c                                |   3 +
 net/ipv6/raw.c                                     | 120 ++-
 net/mac80211/airtime.c                             |   4 +-
 net/mac80211/cfg.c                                 |  48 +-
 net/mac80211/chan.c                                |  39 +-
 net/mac80211/driver-ops.h                          |   2 +-
 net/mac80211/ethtool.c                             |   4 +-
 net/mac80211/ibss.c                                |  10 +-
 net/mac80211/ieee80211_i.h                         |   6 +-
 net/mac80211/iface.c                               |   8 +-
 net/mac80211/key.c                                 |  18 +-
 net/mac80211/main.c                                |   4 +-
 net/mac80211/mesh.c                                |  14 +-
 net/mac80211/mlme.c                                |  44 +-
 net/mac80211/ocb.c                                 |   3 +-
 net/mac80211/offchannel.c                          |   6 +-
 net/mac80211/rate.c                                |   5 +-
 net/mac80211/rx.c                                  |   2 +-
 net/mac80211/sta_info.c                            |   4 +-
 net/mac80211/tdls.c                                |   6 +-
 net/mac80211/tx.c                                  |  28 +-
 net/mac80211/util.c                                |  16 +-
 net/mac80211/vht.c                                 |   6 +-
 net/mptcp/protocol.c                               |   3 +-
 net/netfilter/nf_tables_api.c                      | 100 +--
 net/netfilter/nft_bitwise.c                        |  66 +-
 net/netfilter/nft_cmp.c                            |  44 +-
 net/netfilter/nft_immediate.c                      |  22 +-
 net/netfilter/nft_range.c                          |  27 +-
 net/rose/af_rose.c                                 |  11 +-
 net/rose/rose_route.c                              |   2 +
 net/sched/cls_route.c                              |   2 +-
 net/wireless/ap.c                                  |  46 +-
 net/wireless/chan.c                                | 206 +++--
 net/wireless/core.c                                |  28 +-
 net/wireless/core.h                                |  13 +-
 net/wireless/ibss.c                                |  57 +-
 net/wireless/mesh.c                                |  31 +-
 net/wireless/mlme.c                                |  75 +-
 net/wireless/nl80211.c                             | 656 +++++++++++-----
 net/wireless/ocb.c                                 |   5 +-
 net/wireless/rdev-ops.h                            |  32 +-
 net/wireless/reg.c                                 | 139 ++--
 net/wireless/scan.c                                |   8 +-
 net/wireless/sme.c                                 | 102 +--
 net/wireless/trace.h                               |  86 ++-
 net/wireless/util.c                                |  44 +-
 net/wireless/wext-compat.c                         |  48 +-
 net/wireless/wext-sme.c                            |  29 +-
 samples/bpf/xdp_router_ipv4.bpf.c                  |   9 +
 scripts/faddr2line                                 |   4 +-
 scripts/gdb/linux/dmesg.py                         |   9 +-
 scripts/gdb/linux/utils.py                         |  14 +-
 security/selinux/ss/policydb.h                     |   2 +
 security/selinux/ss/services.c                     |   9 +-
 sound/pci/hda/patch_cirrus.c                       |   1 +
 sound/pci/hda/patch_conexant.c                     |  11 +-
 sound/pci/hda/patch_realtek.c                      | 124 +++
 sound/soc/amd/yc/acp6x-mach.c                      |  32 +-
 sound/soc/amd/yc/pci-acp6x.c                       |   2 +-
 sound/soc/atmel/mchp-spdifrx.c                     |   9 +-
 sound/soc/codecs/cros_ec_codec.c                   |   1 +
 sound/soc/codecs/cs35l45.c                         |   2 +
 sound/soc/codecs/da7210.c                          |   2 +
 sound/soc/codecs/max98390.c                        |   2 +-
 sound/soc/codecs/msm8916-wcd-digital.c             |  46 +-
 sound/soc/codecs/mt6359-accdet.c                   |   1 +
 sound/soc/codecs/mt6359.c                          |   1 +
 sound/soc/codecs/wcd9335.c                         |  81 +-
 sound/soc/codecs/wsa881x.c                         |  10 +-
 sound/soc/fsl/fsl-asoc-card.c                      |   5 +-
 sound/soc/fsl/fsl_asrc.c                           |   6 +-
 sound/soc/fsl/fsl_easrc.c                          |   9 +-
 sound/soc/fsl/fsl_easrc.h                          |   2 +-
 sound/soc/fsl/imx-audmux.c                         |   2 +-
 sound/soc/fsl/imx-card.c                           |  22 +-
 sound/soc/generic/audio-graph-card.c               |   4 +-
 sound/soc/generic/audio-graph-card2.c              |  44 +-
 sound/soc/intel/boards/sof_rt5682.c                |  18 +-
 sound/soc/mediatek/mt6797/mt6797-mt6351.c          |   6 +-
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c   |  10 +-
 sound/soc/mediatek/mt8173/mt8173-rt5650.c          |   9 +-
 sound/soc/qcom/lpass-cpu.c                         |   1 +
 sound/soc/qcom/qdsp6/q6adm.c                       |   2 +-
 sound/soc/samsung/aries_wm8994.c                   |   6 +-
 sound/soc/samsung/h1940_uda1380.c                  |   2 +-
 sound/soc/samsung/rx1950_uda1380.c                 |   4 +-
 sound/soc/soc-core.c                               |  18 +-
 sound/soc/sof/ipc3-topology.c                      |   1 +
 sound/soc/sof/mediatek/mt8195/mt8195-loader.c      |   2 +-
 sound/soc/sof/sof-client-ipc-msg-injector.c        |  29 +-
 sound/soc/sof/sof-priv.h                           |   4 +-
 sound/usb/bcd2000/bcd2000.c                        |   3 +-
 sound/usb/quirks.c                                 |   2 +
 tools/lib/bpf/bpf_tracing.h                        |   2 +-
 tools/lib/bpf/gen_loader.c                         |   2 +-
 tools/lib/bpf/libbpf.c                             | 154 ++--
 tools/lib/bpf/libbpf_internal.h                    |  11 +-
 tools/lib/bpf/linker.c                             |   5 -
 tools/lib/bpf/usdt.c                               | 123 +--
 tools/lib/bpf/xsk.c                                |   9 +-
 tools/perf/builtin-stat.c                          |  30 -
 tools/perf/tests/shell/stat+csv_output.sh          |   7 +-
 tools/perf/util/dsos.c                             |  15 +-
 tools/perf/util/genelf.c                           |   6 +-
 tools/perf/util/symbol-elf.c                       |  27 +-
 tools/power/x86/intel-speed-select/isst-daemon.c   |   2 +-
 tools/power/x86/turbostat/turbostat.c              |   2 +-
 tools/testing/selftests/bpf/Makefile               |  21 +-
 tools/testing/selftests/bpf/prog_tests/btf.c       |   2 +-
 .../selftests/bpf/prog_tests/fexit_stress.c        |  32 +-
 .../testing/selftests/bpf/prog_tests/sock_fields.c |   1 -
 .../testing/selftests/bpf/prog_tests/tc_redirect.c |   8 +-
 tools/testing/selftests/bpf/progs/test_tc_dtime.c  |  53 +-
 .../selftests/kvm/lib/s390x/diag318_test_handler.c |   9 +-
 tools/testing/selftests/kvm/lib/x86_64/processor.c |   2 +-
 .../testing/selftests/kvm/max_guest_memory_test.c  |  26 +-
 tools/testing/selftests/net/fib_rule_tests.sh      |  23 +
 tools/testing/selftests/powerpc/math/mma.S         |   3 +
 .../selftests/powerpc/papr_attributes/attr_test.c  |  30 +-
 tools/testing/selftests/rcutorture/bin/kvm.sh      |   6 +-
 tools/testing/selftests/seccomp/seccomp_bpf.c      |   2 +-
 .../testing/selftests/timers/clocksource-switch.c  |   6 +-
 tools/testing/selftests/timers/valid-adjtimex.c    |   2 +-
 tools/testing/selftests/vm/hugepage-mremap.c       |   2 +-
 tools/testing/selftests/vm/hugetlb-madvise.c       |   5 +-
 tools/testing/selftests/vm/mrelease_test.c         |  16 +-
 .../selftests/wireguard/qemu/arch/riscv32.config   |   1 +
 tools/thermal/tmon/sysfs.c                         |  24 +-
 tools/thermal/tmon/tmon.h                          |   3 +
 tools/tracing/rtla/Makefile                        |   2 +-
 tools/tracing/rtla/src/trace.c                     |   9 +-
 tools/tracing/rtla/src/utils.c                     |   5 +-
 virt/kvm/kvm_main.c                                |  25 +-
 virt/kvm/pfncache.c                                | 207 +++--
 1280 files changed, 15051 insertions(+), 9078 deletions(-)
author maintainer
#1 lore raw

PATCH 1/1157 Makefile: link with -z noexecstack --no-warn-rwx-segments

From: Nick Desaulniers <[email protected]>

commit 0d362be5b14200b77ecc2127936a5ff82fbffe41 upstream.

Users of GNU ld (BFD) from binutils 2.39+ will observe multiple instances of a new warning when linking kernels in the form:

ld: warning: vmlinux: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: vmlinux has a LOAD segment with RWX permissions

Generally, we would like to avoid the stack being executable. Because there could be a need for the stack to be executable, assembler sources have to opt-in to this security feature via explicit creation of the .note.GNU-stack feature (which compilers create by default) or command line flag --noexecstack. Or we can simply tell the linker the production of such sections is irrelevant and to link the stack as --noexecstack.

LLVM's LLD linker defaults to -z noexecstack, so this flag isn't strictly necessary when linking with LLD, only BFD, but it doesn't hurt to be explicit here for all linkers IMO. --no-warn-rwx-segments is currently BFD specific and only available in the current latest release, so it's wrapped in an ld-option check.

While the kernel makes extensive usage of ELF sections, it doesn't use permissions from ELF segments.

---
 Makefile |    5 +++++
 1 file changed, 5 insertions(+)
Makefile +5 -0
@@ -1033,6 +1033,11 @@ KBUILD_CFLAGS   += $(KCFLAGS)
 KBUILD_LDFLAGS_MODULE += --build-id=sha1
 LDFLAGS_vmlinux += --build-id=sha1
 
+KBUILD_LDFLAGS	+= -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+KBUILD_LDFLAGS	+= $(call ld-option,--no-warn-rwx-segments)
+endif
+
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
author maintainer
#2 lore raw

PATCH 2/1157 x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments

In reply to Greg Kroah-Hartman

From: Nick Desaulniers <[email protected]>

commit ffcf9c5700e49c0aee42dcba9a12ba21338e8136 upstream.

Users of GNU ld (BFD) from binutils 2.39+ will observe multiple instances of a new warning when linking kernels in the form:

ld: warning: arch/x86/boot/pmjump.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: arch/x86/boot/compressed/vmlinux has a LOAD segment with RWX permissions

Generally, we would like to avoid the stack being executable. Because there could be a need for the stack to be executable, assembler sources have to opt-in to this security feature via explicit creation of the .note.GNU-stack feature (which compilers create by default) or command line flag --noexecstack. Or we can simply tell the linker the production of such sections is irrelevant and to link the stack as --noexecstack.

LLVM's LLD linker defaults to -z noexecstack, so this flag isn't strictly necessary when linking with LLD, only BFD, but it doesn't hurt to be explicit here for all linkers IMO. --no-warn-rwx-segments is currently BFD specific and only available in the current latest release, so it's wrapped in an ld-option check.

While the kernel makes extensive usage of ELF sections, it doesn't use permissions from ELF segments.

---
 arch/x86/boot/Makefile            |    2 +-
 arch/x86/boot/compressed/Makefile |    4 ++++
 arch/x86/entry/vdso/Makefile      |    2 +-
 3 files changed, 6 insertions(+), 2 deletions(-)
arch/x86/boot/Makefile +1 -1
@@ -103,7 +103,7 @@ $(obj)/zoffset.h: $(obj)/compressed/vmli
 AFLAGS_header.o += -I$(objtree)/$(obj)
 $(obj)/header.o: $(obj)/zoffset.h
 
-LDFLAGS_setup.elf	:= -m elf_i386 -T
+LDFLAGS_setup.elf	:= -m elf_i386 -z noexecstack -T
 $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
 	$(call if_changed,ld)
 
arch/x86/boot/compressed/Makefile +4 -0
@@ -69,6 +69,10 @@ LDFLAGS_vmlinux := -pie $(call ld-option
 ifdef CONFIG_LD_ORPHAN_WARN
 LDFLAGS_vmlinux += --orphan-handling=warn
 endif
+LDFLAGS_vmlinux += -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+LDFLAGS_vmlinux += $(call ld-option,--no-warn-rwx-segments)
+endif
 LDFLAGS_vmlinux += -T
 
 hostprogs	:= mkpiggy
arch/x86/entry/vdso/Makefile +1 -1
@@ -180,7 +180,7 @@ quiet_cmd_vdso = VDSO    $@
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
 VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 \
-	$(call ld-option, --eh-frame-hdr) -Bsymbolic
+	$(call ld-option, --eh-frame-hdr) -Bsymbolic -z noexecstack
 GCOV_PROFILE := n
 
 quiet_cmd_vdso_and_check = VDSO    $@
author maintainer
#3 lore raw

PATCH 3/1157 Revert "pNFS: nfs3_set_ds_client should set NFS_CS_NOPING"

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

commit 9597152d98840c2517230740952df97cfcc07e2f upstream.

This reverts commit c6eb58435b98bd843d3179664a0195ff25adb2c3. If a transport is down, then we want to fail over to other transports if they are listed in the GETDEVICEINFO reply.

Fixes c6eb58435b98 ("pNFS: nfs3_set_ds_client should set NFS_CS_NOPING")
Cc [email protected] # 5.11.x
---
 fs/nfs/nfs3client.c |    1 -
 1 file changed, 1 deletion(-)
fs/nfs/nfs3client.c +0 -1
@@ -108,7 +108,6 @@ struct nfs_client *nfs3_set_ds_client(st
 	if (mds_srv->flags & NFS_MOUNT_NORESVPORT)
 		__set_bit(NFS_CS_NORESVPORT, &cl_init.init_flags);
 
-	__set_bit(NFS_CS_NOPING, &cl_init.init_flags);
 	__set_bit(NFS_CS_DS, &cl_init.init_flags);
 
 	/* Use the MDS nfs_client cl_ipaddr. */
author maintainer
#4 lore raw

PATCH 4/1157 scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"

In reply to Greg Kroah-Hartman

From: Nilesh Javali <[email protected]>

commit 5bc7b01c513a4a9b4cfe306e8d1720cfcfd3b8a3 upstream.

This fixes the regression of NVMe discovery failure during driver load time.

This reverts commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99.

---
 drivers/scsi/qla2xxx/qla_init.c |    5 ++---
 drivers/scsi/qla2xxx/qla_nvme.c |    5 -----
 2 files changed, 2 insertions(+), 8 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +2 -3
@@ -5767,8 +5767,6 @@ qla2x00_reg_remote_port(scsi_qla_host_t
 	if (atomic_read(&fcport->state) == FCS_ONLINE)
 		return;
 
-	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
 	rport_ids.node_name = wwn_to_u64(fcport->node_name);
 	rport_ids.port_name = wwn_to_u64(fcport->port_name);
 	rport_ids.port_id = fcport->d_id.b.domain << 16 |
@@ -5869,7 +5867,6 @@ qla2x00_update_fcport(scsi_qla_host_t *v
 		qla2x00_reg_remote_port(vha, fcport);
 		break;
 	case MODE_TARGET:
-		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 		if (!vha->vha_tgt.qla_tgt->tgt_stop &&
 			!vha->vha_tgt.qla_tgt->tgt_stopped)
 			qlt_fc_port_added(vha, fcport);
@@ -5887,6 +5884,8 @@ qla2x00_update_fcport(scsi_qla_host_t *v
 	if (NVME_TARGET(vha->hw, fcport))
 		qla_nvme_register_remote(vha, fcport);
 
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
 		if (fcport->id_changed) {
 			fcport->id_changed = 0;
drivers/scsi/qla2xxx/qla_nvme.c +0 -5
@@ -37,11 +37,6 @@ int qla_nvme_register_remote(struct scsi
 		(fcport->nvme_flag & NVME_FLAG_REGISTERED))
 		return 0;
 
-	if (atomic_read(&fcport->state) == FCS_ONLINE)
-		return 0;
-
-	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
 	fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
 
 	memset(&req, 0, sizeof(struct nvme_fc_port_info));
author maintainer
#5 lore raw

PATCH 5/1157 pNFS/flexfiles: Report RDMA connection errors to the server

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

commit 7836d75467e9d214bdf5c693b32721de729a6e38 upstream.

The RPC/RDMA driver will return -EPROTO and -ENODEV as connection errors under certain circumstances. Make sure that we handle them and report them to the server. If not, we can end up cycling forever in a LAYOUTGET/LAYOUTRETURN loop.

Fixes a12f996d3413 ("NFSv4/pNFS: Use connections to a DS that are all of the same protocol family")
Cc [email protected] # 5.11.x
---
 fs/nfs/flexfilelayout/flexfilelayout.c |    4 ++++
 1 file changed, 4 insertions(+)
fs/nfs/flexfilelayout/flexfilelayout.c +4 -0
@@ -1131,6 +1131,8 @@ static int ff_layout_async_handle_error_
 	case -EIO:
 	case -ETIMEDOUT:
 	case -EPIPE:
+	case -EPROTO:
+	case -ENODEV:
 		dprintk("%s DS connection error %d\n", __func__,
 			task->tk_status);
 		nfs4_delete_deviceid(devid->ld, devid->nfs_client,
@@ -1236,6 +1238,8 @@ static void ff_layout_io_track_ds_error(
 		case -ENOBUFS:
 		case -EPIPE:
 		case -EPERM:
+		case -EPROTO:
+		case -ENODEV:
 			*op_status = status = NFS4ERR_NXIO;
 			break;
 		case -EACCES:
author maintainer
#6 lore raw

PATCH 6/1157 nfsd: eliminate the NFSD_FILE_BREAK_* flags

In reply to Greg Kroah-Hartman

From: Jeff Layton <[email protected]>

commit 23ba98de6dcec665e15c0ca19244379bb0d30932 upstream.

We had a report from the spring Bake-a-thon of data corruption in some nfstest_interop tests. Looking at the traces showed the NFS server allowing a v3 WRITE to proceed while a read delegation was still outstanding.

Currently, we only set NFSD_FILE_BREAK_* flags if NFSD_MAY_NOT_BREAK_LEASE was set when we call nfsd_file_alloc. NFSD_MAY_NOT_BREAK_LEASE was intended to be set when finding files for COMMIT ops, where we need a writeable filehandle but don't need to break read leases.

It doesn't make any sense to consult that flag when allocating a file since the file may be used on subsequent calls where we do want to break the lease (and the usage of it here seems to be reverse from what it should be anyway).

Also, after calling nfsd_open_break_lease, we don't want to clear the BREAK_* bits. A lease could end up being set on it later (more than once) and we need to be able to break those leases as well.

This means that the NFSD_FILE_BREAK_* flags now just mirror NFSD_MAY_{READ,WRITE} flags, so there's no need for them at all. Just drop those flags and unconditionally call nfsd_open_break_lease every time.

Fixes 65294c1f2c5e (nfsd: add a new struct file caching facility to nfsd)
Cc <[email protected]> # 5.4.x : bb283ca18d1e NFSD: Clean up the show_nf_flags() macro
Cc <[email protected]> # 5.4.x
---
 fs/nfsd/filecache.c |   22 +---------------------
 fs/nfsd/filecache.h |    4 +---
 fs/nfsd/trace.h     |    2 --
 3 files changed, 2 insertions(+), 26 deletions(-)
fs/nfsd/filecache.c +1 -21
@@ -184,12 +184,6 @@ nfsd_file_alloc(struct inode *inode, uns
 		nf->nf_hashval = hashval;
 		refcount_set(&nf->nf_ref, 1);
 		nf->nf_may = may & NFSD_FILE_MAY_MASK;
-		if (may & NFSD_MAY_NOT_BREAK_LEASE) {
-			if (may & NFSD_MAY_WRITE)
-				__set_bit(NFSD_FILE_BREAK_WRITE, &nf->nf_flags);
-			if (may & NFSD_MAY_READ)
-				__set_bit(NFSD_FILE_BREAK_READ, &nf->nf_flags);
-		}
 		nf->nf_mark = NULL;
 		trace_nfsd_file_alloc(nf);
 	}
@@ -958,21 +952,7 @@ wait_for_construction:
 
 	this_cpu_inc(nfsd_file_cache_hits);
 
-	if (!(may_flags & NFSD_MAY_NOT_BREAK_LEASE)) {
-		bool write = (may_flags & NFSD_MAY_WRITE);
-
-		if (test_bit(NFSD_FILE_BREAK_READ, &nf->nf_flags) ||
-		    (test_bit(NFSD_FILE_BREAK_WRITE, &nf->nf_flags) && write)) {
-			status = nfserrno(nfsd_open_break_lease(
-					file_inode(nf->nf_file), may_flags));
-			if (status == nfs_ok) {
-				clear_bit(NFSD_FILE_BREAK_READ, &nf->nf_flags);
-				if (write)
-					clear_bit(NFSD_FILE_BREAK_WRITE,
-						  &nf->nf_flags);
-			}
-		}
-	}
+	status = nfserrno(nfsd_open_break_lease(file_inode(nf->nf_file), may_flags));
 out:
 	if (status == nfs_ok) {
 		*pnf = nf;
fs/nfsd/filecache.h +1 -3
@@ -37,9 +37,7 @@ struct nfsd_file {
 	struct net		*nf_net;
 #define NFSD_FILE_HASHED	(0)
 #define NFSD_FILE_PENDING	(1)
-#define NFSD_FILE_BREAK_READ	(2)
-#define NFSD_FILE_BREAK_WRITE	(3)
-#define NFSD_FILE_REFERENCED	(4)
+#define NFSD_FILE_REFERENCED	(2)
 	unsigned long		nf_flags;
 	struct inode		*nf_inode;
 	unsigned int		nf_hashval;
fs/nfsd/trace.h +0 -2
@@ -696,8 +696,6 @@ DEFINE_CLID_EVENT(confirmed_r);
 	__print_flags(val, "|",						\
 		{ 1 << NFSD_FILE_HASHED,	"HASHED" },		\
 		{ 1 << NFSD_FILE_PENDING,	"PENDING" },		\
-		{ 1 << NFSD_FILE_BREAK_READ,	"BREAK_READ" },		\
-		{ 1 << NFSD_FILE_BREAK_WRITE,	"BREAK_WRITE" },	\
 		{ 1 << NFSD_FILE_REFERENCED,	"REFERENCED"})
 
 DECLARE_EVENT_CLASS(nfsd_file_class,
author maintainer
#7 lore raw

PATCH 7/1157 ALSA: usb-audio: Add quirk for Behringer UMC202HD

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit e086c37f876fd1f551e2b4f9be97d4a1923cd219 upstream.

Just like other Behringer models, UMC202HD (USB ID 1397:0507) requires the quirk for the stable streaming, too.

---
 sound/usb/quirks.c |    2 ++
 1 file changed, 2 insertions(+)
sound/usb/quirks.c +2 -0
@@ -1843,6 +1843,8 @@ static const struct usb_audio_quirk_flag
 		   QUIRK_FLAG_SHARE_MEDIA_DEVICE | QUIRK_FLAG_ALIGN_TRANSFER),
 	DEVICE_FLG(0x1395, 0x740a, /* Sennheiser DECT */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
+	DEVICE_FLG(0x1397, 0x0507, /* Behringer UMC202HD */
+		   QUIRK_FLAG_PLAYBACK_FIRST | QUIRK_FLAG_GENERIC_IMPLICIT_FB),
 	DEVICE_FLG(0x1397, 0x0508, /* Behringer UMC204HD */
 		   QUIRK_FLAG_PLAYBACK_FIRST | QUIRK_FLAG_GENERIC_IMPLICIT_FB),
 	DEVICE_FLG(0x1397, 0x0509, /* Behringer UMC404HD */
author maintainer
#8 lore raw

PATCH 8/1157 ALSA: bcd2000: Fix a UAF bug on the error path of probing

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

commit ffb2759df7efbc00187bfd9d1072434a13a54139 upstream.

When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug.

The following log can reveal it:

[   50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
[   50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0
[   50.729530] Call Trace:
[   50.732899]  bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]

Fix this by adding usb_kill_urb() before usb_free_urb().

Fixes b47a22290d58 ("ALSA: MIDI driver for Behringer BCD2000 USB device")
---
 sound/usb/bcd2000/bcd2000.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
sound/usb/bcd2000/bcd2000.c +2 -1
@@ -348,7 +348,8 @@ static int bcd2000_init_midi(struct bcd2
 static void bcd2000_free_usb_related_resources(struct bcd2000 *bcd2k,
 						struct usb_interface *interface)
 {
-	/* usb_kill_urb not necessary, urb is aborted automatically */
+	usb_kill_urb(bcd2k->midi_out_urb);
+	usb_kill_urb(bcd2k->midi_in_urb);
 
 	usb_free_urb(bcd2k->midi_out_urb);
 	usb_free_urb(bcd2k->midi_in_urb);
author maintainer
#9 lore raw

PATCH 9/1157 ALSA: hda/realtek: Add quirk for Clevo NV45PZ

In reply to Greg Kroah-Hartman

From: Tim Crawford <[email protected]>

commit be561ffad708f0cee18aee4231f80ffafaf7a419 upstream.

Fixes headset detection on Clevo NV45PZ.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -9203,6 +9203,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x4018, "Clevo NV40M[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x4019, "Clevo NV40MZ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x4020, "Clevo NV40MB", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x4041, "Clevo NV4[15]PZ", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x40a1, "Clevo NL40GU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x40c1, "Clevo NL40[CZ]U", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x40d1, "Clevo NL41DU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
author maintainer
#10 lore raw

PATCH 10/1157 ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx

In reply to Greg Kroah-Hartman

From: Ivan Hasenkampf <[email protected]>

commit 24df5428ef9d1ca1edd54eca7eb667110f2dfae3 upstream.

Fixes speaker output on HP Spectre x360 15-eb0xxx

[ re-sorted in SSID order by tiwai ]

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)
sound/pci/hda/patch_realtek.c +2 -0
@@ -9044,6 +9044,8 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x861f, "HP Elite Dragonfly G1", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
+	SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
+	SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
 	SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x8720, "HP EliteBook x360 1040 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
author maintainer
#11 lore raw

PATCH 11/1157 ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7

In reply to Greg Kroah-Hartman

From: Philipp Jungkamp <[email protected]>

commit 3790a3d6dbbc48e30586e9c3fc752a00e2e11946 upstream.

The Lenovo Yoga 9 14IAP7 is set up similarly to the Thinkpad X1 7th and 8th Gen. It also has the speakers attached to NID 0x14 and the bass speakers to NID 0x17, but here the codec misreports the NID 0x17 as unconnected.

The pincfg and hda verbs connect and activate the bass speaker amplifiers, but the generic driver will connect them to NID 0x06 which has no volume control. Set connection list/preferred connections is required to gain volume control.

---
 sound/pci/hda/patch_realtek.c |  109 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)
sound/pci/hda/patch_realtek.c +109 -0
@@ -6787,6 +6787,43 @@ static void alc_fixup_dell4_mic_no_prese
 	}
 }
 
+static void alc287_fixup_yoga9_14iap7_bass_spk_pin(struct hda_codec *codec,
+					  const struct hda_fixup *fix, int action)
+{
+	/*
+	 * The Pin Complex 0x17 for the bass speakers is wrongly reported as
+	 * unconnected.
+	 */
+	static const struct hda_pintbl pincfgs[] = {
+		{ 0x17, 0x90170121 },
+		{ }
+	};
+	/*
+	 * Avoid DAC 0x06 and 0x08, as they have no volume controls.
+	 * DAC 0x02 and 0x03 would be fine.
+	 */
+	static const hda_nid_t conn[] = { 0x02, 0x03 };
+	/*
+	 * Prefer both speakerbar (0x14) and bass speakers (0x17) connected to DAC 0x02.
+	 * Headphones (0x21) are connected to DAC 0x03.
+	 */
+	static const hda_nid_t preferred_pairs[] = {
+		0x14, 0x02,
+		0x17, 0x02,
+		0x21, 0x03,
+		0
+	};
+	struct alc_spec *spec = codec->spec;
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_apply_pincfgs(codec, pincfgs);
+		snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn);
+		spec->gen.preferred_dacs = preferred_pairs;
+		break;
+	}
+}
+
 enum {
 	ALC269_FIXUP_GPIO2,
 	ALC269_FIXUP_SONY_VAIO,
@@ -7023,6 +7060,8 @@ enum {
 	ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED,
 	ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED,
 	ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE,
+	ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK,
+	ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN,
 };
 
 /* A special fixup for Lenovo C940 and Yoga Duet 7;
@@ -8865,6 +8904,74 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
 	},
+	[ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			// enable left speaker
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x41 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xc },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x1a },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xf },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x42 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x10 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x40 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x2 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			// enable right speaker
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x24 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x46 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xc },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x2a },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xf },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x46 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x10 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x44 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x26 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x2 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x0 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0xb020 },
+
+			{ },
+		},
+	},
+	[ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc287_fixup_yoga9_14iap7_bass_spk_pin,
+		.chained = true,
+		.chain_id = ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -9318,6 +9425,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x3176, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3178, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x31af, "ThinkCentre Station", ALC623_FIXUP_LENOVO_THINKSTATION_P340),
+	SND_PCI_QUIRK(0x17aa, 0x3801, "Lenovo Yoga9 14IAP7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo Yoga DuetITL 2021", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3813, "Legion 7i 15IMHG05", ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS),
 	SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940 / Yoga Duet 7", ALC298_FIXUP_LENOVO_C940_DUET7),
@@ -9563,6 +9671,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
 	{.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"},
 	{.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"},
+	{.id = ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN, .name = "alc287-yoga9-bass-spk-pin"},
 	{.id = ALC623_FIXUP_LENOVO_THINKSTATION_P340, .name = "alc623-lenovo-thinkstation-p340"},
 	{.id = ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, .name = "alc255-acer-headphone-and-mic"},
 	{.id = ALC285_FIXUP_HP_GPIO_AMP_INIT, .name = "alc285-hp-amp-init"},
author maintainer
#12 lore raw

PATCH 12/1157 ASoC: amd: yc: Update DMI table entries

In reply to Greg Kroah-Hartman

From: syed sabakareem <[email protected]>

commit be0aa8d4b0fcb4532bf7973141e911998ab39508 upstream.

Removed intel DMI product id's 21AW/21AX/21D8/21D9/21BN/21BQ in DMI table and updated DMI entry for AMD platform X13 Gen 3 platform 21CM/21CN.

---
 sound/soc/amd/yc/acp6x-mach.c |   32 ++------------------------------
 1 file changed, 2 insertions(+), 30 deletions(-)
sound/soc/amd/yc/acp6x-mach.c +2 -30
@@ -105,28 +105,14 @@ static const struct dmi_system_id yc_acp
 		.driver_data = &acp6x_card,
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "21AW"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21CM"),
 		}
 	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "21AX"),
-		}
-	},
-	{
-		.driver_data = &acp6x_card,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "21BN"),
-		}
-	},
-	{
-		.driver_data = &acp6x_card,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "21BQ"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21CN"),
 		}
 	},
 	{
@@ -157,20 +143,6 @@ static const struct dmi_system_id yc_acp
 			DMI_MATCH(DMI_PRODUCT_NAME, "21CL"),
 		}
 	},
-	{
-		.driver_data = &acp6x_card,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "21D8"),
-		}
-	},
-	{
-		.driver_data = &acp6x_card,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "21D9"),
-		}
-	},
 	{}
 };
 
author maintainer
#13 lore raw

PATCH 13/1157 hwmon: (nct6775) Fix platform driver suspend regression

In reply to Greg Kroah-Hartman

From: Zev Weiss <[email protected]>

commit f4e6960f4f16b1ca5da16cec7612ecc86402ac05 upstream.

Commit c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver") introduced a slight change in nct6775_suspend() in order to avoid an otherwise-needless symbol export for nct6775_update_device(), replacing a call to that function with a simple dev_get_drvdata() instead.

As it turns out, there is no guarantee that nct6775_update_device() is ever called prior to suspend. If this happens, the resume function ends up writing bad data into the various chip registers, which results in a crash shortly after resume.

To fix the problem, just add the symbol export and return to using nct6775_update_device() as was employed previously.

Fixes c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver")
[groeck: Updated description]
---
 drivers/hwmon/nct6775-core.c     | 3 ++-
 drivers/hwmon/nct6775-platform.c | 2 +-
 drivers/hwmon/nct6775.h          | 2 ++
 3 files changed, 5 insertions(+), 2 deletions(-)
drivers/hwmon/nct6775-core.c +2 -1
index 446964cbae4c..da9ec6983e13 100644
@@ -1480,7 +1480,7 @@ static int nct6775_update_pwm_limits(struct device *dev)
 	return 0;
 }
 
-static struct nct6775_data *nct6775_update_device(struct device *dev)
+struct nct6775_data *nct6775_update_device(struct device *dev)
 {
 	struct nct6775_data *data = dev_get_drvdata(dev);
 	int i, j, err = 0;
@@ -1615,6 +1615,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
 	mutex_unlock(&data->update_lock);
 	return err ? ERR_PTR(err) : data;
 }
+EXPORT_SYMBOL_GPL(nct6775_update_device);
 
 /*
  * Sysfs callback functions
drivers/hwmon/nct6775-platform.c +1 -1
index ab30437221ce..41c97cfacfb8 100644
@@ -359,7 +359,7 @@ static int __maybe_unused nct6775_suspend(struct device *dev)
 {
 	int err;
 	u16 tmp;
-	struct nct6775_data *data = dev_get_drvdata(dev);
+	struct nct6775_data *data = nct6775_update_device(dev);
 
 	if (IS_ERR(data))
 		return PTR_ERR(data);
drivers/hwmon/nct6775.h +2 -0
index 93f708148e65..be41848c3cd2 100644
@@ -196,6 +196,8 @@ static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 va
 	return regmap_write(data->regmap, reg, value);
 }
 
+struct nct6775_data *nct6775_update_device(struct device *dev);
+
 bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg);
 int nct6775_probe(struct device *dev, struct nct6775_data *data,
 		  const struct regmap_config *regmapcfg);
Signature · 1 line
2.37.1
author maintainer
#14 lore raw

PATCH 14/1157 wifi: mac80211_hwsim: fix race condition in pending packet

In reply to Greg Kroah-Hartman

From: Jeongik Cha <[email protected]>

commit 4ee186fa7e40ae06ebbfbad77e249e3746e14114 upstream.

A pending packet uses a cookie as an unique key, but it can be duplicated because it didn't use atomic operators.

And also, a pending packet can be null in hwsim_tx_info_frame_received_nl due to race condition with mac80211_hwsim_stop.

For this,
* Use an atomic type and operator for a cookie
* Add a lock around the loop for pending packets

---
 drivers/net/wireless/mac80211_hwsim.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/wireless/mac80211_hwsim.c +8 -6
@@ -680,7 +680,7 @@ struct mac80211_hwsim_data {
 	bool ps_poll_pending;
 	struct dentry *debugfs;
 
-	uintptr_t pending_cookie;
+	atomic64_t pending_cookie;
 	struct sk_buff_head pending;	/* packets pending */
 	/*
 	 * Only radios in the same group can communicate together (the
@@ -1347,7 +1347,7 @@ static void mac80211_hwsim_tx_frame_nl(s
 	int i;
 	struct hwsim_tx_rate tx_attempts[IEEE80211_TX_MAX_RATES];
 	struct hwsim_tx_rate_flag tx_attempts_flags[IEEE80211_TX_MAX_RATES];
-	uintptr_t cookie;
+	u64 cookie;
 
 	if (data->ps != PS_DISABLED)
 		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
@@ -1416,8 +1416,7 @@ static void mac80211_hwsim_tx_frame_nl(s
 		goto nla_put_failure;
 
 	/* We create a cookie to identify this skb */
-	data->pending_cookie++;
-	cookie = data->pending_cookie;
+	cookie = (u64)atomic64_inc_return(&data->pending_cookie);
 	info->rate_driver_data[0] = (void *)cookie;
 	if (nla_put_u64_64bit(skb, HWSIM_ATTR_COOKIE, cookie, HWSIM_ATTR_PAD))
 		goto nla_put_failure;
@@ -4080,6 +4079,7 @@ static int hwsim_tx_info_frame_received_
 	const u8 *src;
 	unsigned int hwsim_flags;
 	int i;
+	unsigned long flags;
 	bool found = false;
 
 	if (!info->attrs[HWSIM_ATTR_ADDR_TRANSMITTER] ||
@@ -4107,18 +4107,20 @@ static int hwsim_tx_info_frame_received_
 	}
 
 	/* look for the skb matching the cookie passed back from user */
+	spin_lock_irqsave(&data2->pending.lock, flags);
 	skb_queue_walk_safe(&data2->pending, skb, tmp) {
 		u64 skb_cookie;
 
 		txi = IEEE80211_SKB_CB(skb);
-		skb_cookie = (u64)(uintptr_t)txi->rate_driver_data[0];
+		skb_cookie = (u64)txi->rate_driver_data[0];
 
 		if (skb_cookie == ret_skb_cookie) {
-			skb_unlink(skb, &data2->pending);
+			__skb_unlink(skb, &data2->pending);
 			found = true;
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&data2->pending.lock, flags);
 
 	/* not found */
 	if (!found)
author maintainer
#15 lore raw

PATCH 15/1157 wifi: mac80211_hwsim: add back erroneously removed cast

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit 58b6259d820d63c2adf1c7541b54cce5a2ae6073 upstream.

The robots report that we're now casting to a differently sized integer, which is correct, and the previous patch had erroneously removed it.

Fixes 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet")
Cc Jeongik Cha <[email protected]>
---
 drivers/net/wireless/mac80211_hwsim.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mac80211_hwsim.c +1 -1
@@ -4112,7 +4112,7 @@ static int hwsim_tx_info_frame_received_
 		u64 skb_cookie;
 
 		txi = IEEE80211_SKB_CB(skb);
-		skb_cookie = (u64)txi->rate_driver_data[0];
+		skb_cookie = (u64)(uintptr_t)txi->rate_driver_data[0];
 
 		if (skb_cookie == ret_skb_cookie) {
 			__skb_unlink(skb, &data2->pending);
author maintainer
#16 lore raw

PATCH 16/1157 wifi: mac80211_hwsim: use 32-bit skb cookie

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit cc5250cdb43d444061412df7fae72d2b4acbdf97 upstream.

We won't really have enough skbs to need a 64-bit cookie, and on 32-bit platforms storing the 64-bit cookie into the void *rate_driver_data doesn't work anyway. Switch back to using just a 32-bit cookie and uintptr_t for the type to avoid compiler warnings about all this.

Fixes 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet")
Cc Jeongik Cha <[email protected]>
---
 drivers/net/wireless/mac80211_hwsim.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/wireless/mac80211_hwsim.c +5 -5
@@ -680,7 +680,7 @@ struct mac80211_hwsim_data {
 	bool ps_poll_pending;
 	struct dentry *debugfs;
 
-	atomic64_t pending_cookie;
+	atomic_t pending_cookie;
 	struct sk_buff_head pending;	/* packets pending */
 	/*
 	 * Only radios in the same group can communicate together (the
@@ -1347,7 +1347,7 @@ static void mac80211_hwsim_tx_frame_nl(s
 	int i;
 	struct hwsim_tx_rate tx_attempts[IEEE80211_TX_MAX_RATES];
 	struct hwsim_tx_rate_flag tx_attempts_flags[IEEE80211_TX_MAX_RATES];
-	u64 cookie;
+	uintptr_t cookie;
 
 	if (data->ps != PS_DISABLED)
 		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
@@ -1416,7 +1416,7 @@ static void mac80211_hwsim_tx_frame_nl(s
 		goto nla_put_failure;
 
 	/* We create a cookie to identify this skb */
-	cookie = (u64)atomic64_inc_return(&data->pending_cookie);
+	cookie = atomic_inc_return(&data->pending_cookie);
 	info->rate_driver_data[0] = (void *)cookie;
 	if (nla_put_u64_64bit(skb, HWSIM_ATTR_COOKIE, cookie, HWSIM_ATTR_PAD))
 		goto nla_put_failure;
@@ -4109,10 +4109,10 @@ static int hwsim_tx_info_frame_received_
 	/* look for the skb matching the cookie passed back from user */
 	spin_lock_irqsave(&data2->pending.lock, flags);
 	skb_queue_walk_safe(&data2->pending, skb, tmp) {
-		u64 skb_cookie;
+		uintptr_t skb_cookie;
 
 		txi = IEEE80211_SKB_CB(skb);
-		skb_cookie = (u64)(uintptr_t)txi->rate_driver_data[0];
+		skb_cookie = (uintptr_t)txi->rate_driver_data[0];
 
 		if (skb_cookie == ret_skb_cookie) {
 			__skb_unlink(skb, &data2->pending);
author maintainer
#17 lore raw

PATCH 17/1157 add barriers to buffer_uptodate and set_buffer_uptodate

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

commit d4252071b97d2027d246f6a82cbee4d52f618b47 upstream.

Let's have a look at this piece of code in __bread_slow:

	get_bh(bh);
	bh->b_end_io = end_buffer_read_sync;
	submit_bh(REQ_OP_READ, 0, bh);
	wait_on_buffer(bh);
	if (buffer_uptodate(bh))
		return bh;

Neither wait_on_buffer nor buffer_uptodate contain any memory barrier. Consequently, if someone calls sb_bread and then reads the buffer data, the read of buffer data may be executed before wait_on_buffer(bh) on architectures with weak memory ordering and it may return invalid data.

Fix this bug by adding a memory barrier to set_buffer_uptodate and an acquire barrier to buffer_uptodate (in a similar way as folio_test_uptodate and folio_mark_uptodate).

---
 include/linux/buffer_head.h |   25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)
include/linux/buffer_head.h +24 -1
@@ -117,7 +117,6 @@ static __always_inline int test_clear_bu
  * of the form "mark_buffer_foo()".  These are higher-level functions which
  * do something in addition to setting a b_state bit.
  */
-BUFFER_FNS(Uptodate, uptodate)
 BUFFER_FNS(Dirty, dirty)
 TAS_BUFFER_FNS(Dirty, dirty)
 BUFFER_FNS(Lock, locked)
@@ -135,6 +134,30 @@ BUFFER_FNS(Meta, meta)
 BUFFER_FNS(Prio, prio)
 BUFFER_FNS(Defer_Completion, defer_completion)
 
+static __always_inline void set_buffer_uptodate(struct buffer_head *bh)
+{
+	/*
+	 * make it consistent with folio_mark_uptodate
+	 * pairs with smp_load_acquire in buffer_uptodate
+	 */
+	smp_mb__before_atomic();
+	set_bit(BH_Uptodate, &bh->b_state);
+}
+
+static __always_inline void clear_buffer_uptodate(struct buffer_head *bh)
+{
+	clear_bit(BH_Uptodate, &bh->b_state);
+}
+
+static __always_inline int buffer_uptodate(const struct buffer_head *bh)
+{
+	/*
+	 * make it consistent with folio_test_uptodate
+	 * pairs with smp_mb__before_atomic in set_buffer_uptodate
+	 */
+	return (smp_load_acquire(&bh->b_state) & (1UL << BH_Uptodate)) != 0;
+}
+
 #define bh_offset(bh)		((unsigned long)(bh)->b_data & ~PAGE_MASK)
 
 /* If we *know* page->private refers to buffer_heads */
author maintainer
#18 lore raw

PATCH 18/1157 lockd: detect and reject lock arguments that overflow

In reply to Greg Kroah-Hartman

From: Jeff Layton <[email protected]>

commit 6930bcbfb6ceda63e298c6af6d733ecdf6bd4cde upstream.

lockd doesn't currently vet the start and length in nlm4 requests like it should, and can end up generating lock requests with arguments that overflow when passed to the filesystem.

The NLM4 protocol uses unsigned 64-bit arguments for both start and length, whereas struct file_lock tracks the start and end as loff_t values. By the time we get around to calling nlm4svc_retrieve_args, we've lost the information that would allow us to determine if there was an overflow.

Start tracking the actual start and len for NLM4 requests in the nlm_lock. In nlm4svc_retrieve_args, vet these values to ensure they won't cause an overflow, and return NLM4_FBIG if they do.

---
 fs/lockd/svc4proc.c       |    8 ++++++++
 fs/lockd/xdr4.c           |   19 ++-----------------
 include/linux/lockd/xdr.h |    2 ++
 3 files changed, 12 insertions(+), 17 deletions(-)
fs/lockd/svc4proc.c +8 -0
@@ -32,6 +32,10 @@ nlm4svc_retrieve_args(struct svc_rqst *r
 	if (!nlmsvc_ops)
 		return nlm_lck_denied_nolocks;
 
+	if (lock->lock_start > OFFSET_MAX ||
+	    (lock->lock_len && ((lock->lock_len - 1) > (OFFSET_MAX - lock->lock_start))))
+		return nlm4_fbig;
+
 	/* Obtain host handle */
 	if (!(host = nlmsvc_lookup_host(rqstp, lock->caller, lock->len))
 	 || (argp->monitor && nsm_monitor(host) < 0))
@@ -50,6 +54,10 @@ nlm4svc_retrieve_args(struct svc_rqst *r
 		/* Set up the missing parts of the file_lock structure */
 		lock->fl.fl_file  = file->f_file[mode];
 		lock->fl.fl_pid = current->tgid;
+		lock->fl.fl_start = (loff_t)lock->lock_start;
+		lock->fl.fl_end = lock->lock_len ?
+				   (loff_t)(lock->lock_start + lock->lock_len - 1) :
+				   OFFSET_MAX;
 		lock->fl.fl_lmops = &nlmsvc_lock_operations;
 		nlmsvc_locks_init_private(&lock->fl, host, (pid_t)lock->svid);
 		if (!lock->fl.fl_owner) {
fs/lockd/xdr4.c +2 -17
@@ -20,13 +20,6 @@
 
 #include "svcxdr.h"
 
-static inline loff_t
-s64_to_loff_t(__s64 offset)
-{
-	return (loff_t)offset;
-}
-
-
 static inline s64
 loff_t_to_s64(loff_t offset)
 {
@@ -70,8 +63,6 @@ static bool
 svcxdr_decode_lock(struct xdr_stream *xdr, struct nlm_lock *lock)
 {
 	struct file_lock *fl = &lock->fl;
-	u64 len, start;
-	s64 end;
 
 	if (!svcxdr_decode_string(xdr, &lock->caller, &lock->len))
 		return false;
@@ -81,20 +72,14 @@ svcxdr_decode_lock(struct xdr_stream *xd
 		return false;
 	if (xdr_stream_decode_u32(xdr, &lock->svid) < 0)
 		return false;
-	if (xdr_stream_decode_u64(xdr, &start) < 0)
+	if (xdr_stream_decode_u64(xdr, &lock->lock_start) < 0)
 		return false;
-	if (xdr_stream_decode_u64(xdr, &len) < 0)
+	if (xdr_stream_decode_u64(xdr, &lock->lock_len) < 0)
 		return false;
 
 	locks_init_lock(fl);
 	fl->fl_flags = FL_POSIX;
 	fl->fl_type  = F_RDLCK;
-	end = start + len - 1;
-	fl->fl_start = s64_to_loff_t(start);
-	if (len == 0 || end < 0)
-		fl->fl_end = OFFSET_MAX;
-	else
-		fl->fl_end = s64_to_loff_t(end);
 
 	return true;
 }
include/linux/lockd/xdr.h +2 -0
@@ -41,6 +41,8 @@ struct nlm_lock {
 	struct nfs_fh		fh;
 	struct xdr_netobj	oh;
 	u32			svid;
+	u64			lock_start;
+	u64			lock_len;
 	struct file_lock	fl;
 };
 
author maintainer
#19 lore raw

PATCH 19/1157 HID: hid-input: add Surface Go battery quirk

In reply to Greg Kroah-Hartman

From: Maximilian Luz <[email protected]>

commit db925d809011c37b246434fdce71209fc2e6c0c2 upstream.

Similar to the Surface Go (1), the (Elantech) touchscreen/digitizer in the Surface Go 2 mistakenly reports the battery of the stylus. Instead of over the touchscreen device, battery information is provided via bluetooth and the touchscreen device reports an empty battery.

Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and prevent the erroneous low battery warnings.

---
 drivers/hid/hid-ids.h   |    1 +
 drivers/hid/hid-input.c |    2 ++
 2 files changed, 3 insertions(+)
drivers/hid/hid-ids.h +1 -0
@@ -413,6 +413,7 @@
 #define USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN	0x2544
 #define USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN	0x2706
 #define I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN	0x261A
+#define I2C_DEVICE_ID_SURFACE_GO2_TOUCHSCREEN	0x2A1C
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
drivers/hid/hid-input.c +2 -0
@@ -381,6 +381,8 @@ static const struct hid_device_id hid_ba
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_GO2_TOUCHSCREEN),
+	  HID_BATTERY_QUIRK_IGNORE },
 	{}
 };
 
author maintainer
#20 lore raw

PATCH 22/1157 HID: wacom: Dont register pad_input for touch switch

In reply to Greg Kroah-Hartman

From: Ping Cheng <[email protected]>

commit d6b675687a4ab4dba684716d97c8c6f81bf10905 upstream.

Touch switch state is received through WACOM_PAD_FIELD. However, it is reported by touch_input. Don't register pad_input if no other pad events require the interface.

---
 drivers/hid/wacom_sys.c |    2 +-
 drivers/hid/wacom_wac.c |   43 +++++++++++++++++++++++++------------------
 2 files changed, 26 insertions(+), 19 deletions(-)
drivers/hid/wacom_sys.c +1 -1
@@ -2121,7 +2121,7 @@ static int wacom_register_inputs(struct
 
 	error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac);
 	if (error) {
-		/* no pad in use on this interface */
+		/* no pad events using this interface */
 		input_free_device(pad_input_dev);
 		wacom_wac->pad_input = NULL;
 		pad_input_dev = NULL;
drivers/hid/wacom_wac.c +25 -18

67 lines not on this page · raw message

author maintainer
#21 lore raw

PATCH 23/1157 KVM: nVMX: Snapshot pre-VM-Enter BNDCFGS for !nested_run_pending case

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit fa578398a0ba2c079fa1170da21fa5baae0cedb2 upstream.

If a nested run isn't pending, snapshot vmcs01.GUEST_BNDCFGS irrespective of whether or not VM_ENTRY_LOAD_BNDCFGS is set in vmcs12. When restoring nested state, e.g. after migration, without a nested run pending, prepare_vmcs02() will propagate nested.vmcs01_guest_bndcfgs to vmcs02, i.e. will load garbage/zeros into vmcs02.GUEST_BNDCFGS.

If userspace restores nested state before MSRs, then loading garbage is a non-issue as loading BNDCFGS will also update vmcs02. But if usersepace restores MSRs first, then KVM is responsible for propagating L2's value, which is actually thrown into vmcs01, into vmcs02.

Restoring L2 MSRs into vmcs01, i.e. loading all MSRs before nested state is all kinds of bizarre and ideally would not be supported. Sadly, some VMMs do exactly that and rely on KVM to make things work.

Note, there's still a lurking SMM bug, as propagating vmcs01.GUEST_BNDFGS to vmcs02 across RSM may corrupt L2's BNDCFGS. But KVM's entire VMX+SMM emulation is flawed as SMI+RSM should not toouch _any_ VMCS when use the "default treatment of SMIs", i.e. when not using an SMI Transfer Monitor.

Fixes 62cf9bd8118c ("KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS")
Cc Lei Wang <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/nested.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/kvm/vmx/nested.c +2 -1
@@ -3376,7 +3376,8 @@ enum nvmx_vmentry_status nested_vmx_ente
 	if (!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS))
 		vmx->nested.vmcs01_debugctl = vmcs_read64(GUEST_IA32_DEBUGCTL);
 	if (kvm_mpx_supported() &&
-		!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_BNDCFGS))
+	    (!vmx->nested.nested_run_pending ||
+	     !(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_BNDCFGS)))
 		vmx->nested.vmcs01_guest_bndcfgs = vmcs_read64(GUEST_BNDCFGS);
 
 	/*
author maintainer
#22 lore raw

PATCH 24/1157 KVM: nVMX: Snapshot pre-VM-Enter DEBUGCTL for !nested_run_pending case

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 764643a6be07445308e492a528197044c801b3ba upstream.

If a nested run isn't pending, snapshot vmcs01.GUEST_IA32_DEBUGCTL irrespective of whether or not VM_ENTRY_LOAD_DEBUG_CONTROLS is set in vmcs12. When restoring nested state, e.g. after migration, without a nested run pending, prepare_vmcs02() will propagate nested.vmcs01_debugctl to vmcs02, i.e. will load garbage/zeros into vmcs02.GUEST_IA32_DEBUGCTL.

If userspace restores nested state before MSRs, then loading garbage is a non-issue as loading DEBUGCTL will also update vmcs02. But if usersepace restores MSRs first, then KVM is responsible for propagating L2's value, which is actually thrown into vmcs01, into vmcs02.

Restoring L2 MSRs into vmcs01, i.e. loading all MSRs before nested state is all kinds of bizarre and ideally would not be supported. Sadly, some VMMs do exactly that and rely on KVM to make things work.

Note, there's still a lurking SMM bug, as propagating vmcs01's DEBUGCTL to vmcs02 across RSM may corrupt L2's DEBUGCTL. But KVM's entire VMX+SMM emulation is flawed as SMI+RSM should not toouch _any_ VMCS when use the "default treatment of SMIs", i.e. when not using an SMI Transfer Monitor.

Fixes 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/nested.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/kvm/vmx/nested.c +2 -1
@@ -3373,7 +3373,8 @@ enum nvmx_vmentry_status nested_vmx_ente
 	if (likely(!evaluate_pending_interrupts) && kvm_vcpu_apicv_active(vcpu))
 		evaluate_pending_interrupts |= vmx_has_apicv_interrupt(vcpu);
 
-	if (!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS))
+	if (!vmx->nested.nested_run_pending ||
+	    !(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS))
 		vmx->nested.vmcs01_debugctl = vmcs_read64(GUEST_IA32_DEBUGCTL);
 	if (kvm_mpx_supported() &&
 	    (!vmx->nested.nested_run_pending ||
author maintainer
#23 lore raw

PATCH 25/1157 KVM: SVM: Dont BUG if userspace injects an interrupt with GIF=0

In reply to Greg Kroah-Hartman

From: Maciej S. Szmigiero <[email protected]>

commit f17c31c48e5cde9895a491d91c424eeeada3e134 upstream.

Don't BUG/WARN on interrupt injection due to GIF being cleared, since it's trivial for userspace to force the situation via KVM_SET_VCPU_EVENTS (even if having at least a WARN there would be correct for KVM internally generated injections).

kernel BUG at arch/x86/kvm/svm/svm.c:3386!
invalid opcode: 0000 [#1] SMP

  CPU: 15 PID: 926 Comm: smm_test Not tainted 5.17.0-rc3+ #264
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:svm_inject_irq+0xab/0xb0 [kvm_amd]
  Code: <0f> 0b 0f 1f 00 0f 1f 44 00 00 80 3d ac b3 01 00 00 55 48 89 f5 53
  RSP: 0018:ffffc90000b37d88 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88810a234ac0 RCX: 0000000000000006
  RDX: 0000000000000000 RSI: ffffc90000b37df7 RDI: ffff88810a234ac0
  RBP: ffffc90000b37df7 R08: ffff88810a1fa410 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff888109571000 R14: ffff88810a234ac0 R15: 0000000000000000
  FS:  0000000001821380(0000) GS:ffff88846fdc0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f74fc550008 CR3: 000000010a6fe000 CR4: 0000000000350ea0
  Call Trace:
   <TASK>
   inject_pending_event+0x2f7/0x4c0 [kvm]
   kvm_arch_vcpu_ioctl_run+0x791/0x17a0 [kvm]
   kvm_vcpu_ioctl+0x26d/0x650 [kvm]
   __x64_sys_ioctl+0x82/0xb0
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
   </TASK>
Fixes 219b65dcf6c0 ("KVM: SVM: Improve nested interrupt injection")

Message-Id: <35426af6e123cbe91ec7ce5132ce72521f02b1b5.1651440202.git.maciej.szmigiero@oracle.com>

---
 arch/x86/kvm/svm/svm.c |    2 --
 1 file changed, 2 deletions(-)
arch/x86/kvm/svm/svm.c +0 -2
@@ -3385,8 +3385,6 @@ static void svm_inject_irq(struct kvm_vc
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	BUG_ON(!(gif_set(svm)));
-
 	trace_kvm_inj_virq(vcpu->arch.interrupt.nr);
 	++vcpu->stat.irq_injections;
 
author maintainer
#24 lore raw

PATCH 26/1157 KVM: s390: pv: dont present the ecall interrupt twice

In reply to Greg Kroah-Hartman

From: Nico Boehr <[email protected]>

commit c3f0e5fd2d33d80c5a5a8b5e5d2bab2841709cc8 upstream.

When the SIGP interpretation facility is present and a VCPU sends an ecall to another VCPU in enabled wait, the sending VCPU receives a 56 intercept (partial execution), so KVM can wake up the receiving CPU. Note that the SIGP interpretation facility will take care of the interrupt delivery and KVM's only job is to wake the receiving VCPU.

For PV, the sending VCPU will receive a 108 intercept (pv notify) and should continue like in the non-PV case, i.e. wake the receiving VCPU.

For PV and non-PV guests the interrupt delivery will occur through the SIGP interpretation facility on SIE entry when SIE finds the X bit in the status field set.

However, in handle_pv_notification(), there was no special handling for SIGP, which leads to interrupt injection being requested by KVM for the next SIE entry. This results in the interrupt being delivered twice:
once by the SIGP interpretation facility and once by KVM through the IICTL.

Add the necessary special handling in handle_pv_notification(), similar to handle_partial_execution(), which simply wakes the receiving VCPU and leave interrupt delivery to the SIGP interpretation facility.

In contrast to external calls, emergency calls are not interpreted but also cause a 108 intercept, which is why we still need to call handle_instruction() for SIGP orders other than ecall.

Since kvm_s390_handle_sigp_pei() is now called for all SIGP orders which cause a 108 intercept - even if they are actually handled by handle_instruction() - move the tracepoint in kvm_s390_handle_sigp_pei() to avoid possibly confusing trace messages.

Message-Id: <[email protected]>

---
 arch/s390/kvm/intercept.c |   15 +++++++++++++++
 arch/s390/kvm/sigp.c      |    4 ++--
 2 files changed, 17 insertions(+), 2 deletions(-)
arch/s390/kvm/intercept.c +15 -0
@@ -528,12 +528,27 @@ static int handle_pv_uvc(struct kvm_vcpu
 
 static int handle_pv_notification(struct kvm_vcpu *vcpu)
 {
+	int ret;
+
 	if (vcpu->arch.sie_block->ipa == 0xb210)
 		return handle_pv_spx(vcpu);
 	if (vcpu->arch.sie_block->ipa == 0xb220)
 		return handle_pv_sclp(vcpu);
 	if (vcpu->arch.sie_block->ipa == 0xb9a4)
 		return handle_pv_uvc(vcpu);
+	if (vcpu->arch.sie_block->ipa >> 8 == 0xae) {
+		/*
+		 * Besides external call, other SIGP orders also cause a
+		 * 108 (pv notify) intercept. In contrast to external call,
+		 * these orders need to be emulated and hence the appropriate
+		 * place to handle them is in handle_instruction().
+		 * So first try kvm_s390_handle_sigp_pei() and if that isn't
+		 * successful, go on with handle_instruction().
+		 */
+		ret = kvm_s390_handle_sigp_pei(vcpu);
+		if (!ret)
+			return ret;
+	}
 
 	return handle_instruction(vcpu);
 }
arch/s390/kvm/sigp.c +2 -2
@@ -480,9 +480,9 @@ int kvm_s390_handle_sigp_pei(struct kvm_
 	struct kvm_vcpu *dest_vcpu;
 	u8 order_code = kvm_s390_get_base_disp_rs(vcpu, NULL);
 
-	trace_kvm_s390_handle_sigp_pei(vcpu, order_code, cpu_addr);
-
 	if (order_code == SIGP_EXTERNAL_CALL) {
+		trace_kvm_s390_handle_sigp_pei(vcpu, order_code, cpu_addr);
+
 		dest_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
 		BUG_ON(dest_vcpu == NULL);
 
author maintainer
#25 lore raw

PATCH 27/1157 KVM: Drop unused @gpa param from gfn=>pfn caches __release_gpc() helper

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 345b0fd6fe5f66dfe841bad0b39dd11a5672df68 upstream.

Drop the @pga param from __release_gpc() and rename the helper to make it more obvious that the cache itself is not being released. The helper will be reused by a future commit to release a pfn+khva combination that is _never_ associated with the cache, at which point the current name would go from slightly misleading to blatantly wrong.

No functional change intended.

Message-Id: <[email protected]>

---
 virt/kvm/pfncache.c |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
virt/kvm/pfncache.c +3 -7
@@ -95,7 +95,7 @@ bool kvm_gfn_to_pfn_cache_check(struct k
 }
 EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_check);
 
-static void __release_gpc(struct kvm *kvm, kvm_pfn_t pfn, void *khva, gpa_t gpa)
+static void gpc_release_pfn_and_khva(struct kvm *kvm, kvm_pfn_t pfn, void *khva)
 {
 	/* Unmap the old page if it was mapped before, and release it */
 	if (!is_error_noslot_pfn(pfn)) {
@@ -146,7 +146,6 @@ int kvm_gfn_to_pfn_cache_refresh(struct
 	unsigned long page_offset = gpa & ~PAGE_MASK;
 	kvm_pfn_t old_pfn, new_pfn;
 	unsigned long old_uhva;
-	gpa_t old_gpa;
 	void *old_khva;
 	bool old_valid;
 	int ret = 0;
@@ -160,7 +159,6 @@ int kvm_gfn_to_pfn_cache_refresh(struct
 
 	write_lock_irq(&gpc->lock);
 
-	old_gpa = gpc->gpa;
 	old_pfn = gpc->pfn;
 	old_khva = gpc->khva - offset_in_page(gpc->khva);
 	old_uhva = gpc->uhva;
@@ -244,7 +242,7 @@ int kvm_gfn_to_pfn_cache_refresh(struct
  out:
 	write_unlock_irq(&gpc->lock);
 
-	__release_gpc(kvm, old_pfn, old_khva, old_gpa);
+	gpc_release_pfn_and_khva(kvm, old_pfn, old_khva);
 
 	return ret;
 }
@@ -254,14 +252,12 @@ void kvm_gfn_to_pfn_cache_unmap(struct k
 {
 	void *old_khva;
 	kvm_pfn_t old_pfn;
-	gpa_t old_gpa;
 
 	write_lock_irq(&gpc->lock);
 
 	gpc->valid = false;
 
 	old_khva = gpc->khva - offset_in_page(gpc->khva);
-	old_gpa = gpc->gpa;
 	old_pfn = gpc->pfn;
 
 	/*
@@ -273,7 +269,7 @@ void kvm_gfn_to_pfn_cache_unmap(struct k
 
 	write_unlock_irq(&gpc->lock);
 
-	__release_gpc(kvm, old_pfn, old_khva, old_gpa);
+	gpc_release_pfn_and_khva(kvm, old_pfn, old_khva);
 }
 EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_unmap);
 
author maintainer
#26 lore raw

PATCH 28/1157 KVM: Put the extra pfn reference when reusing a pfn in the gpc cache

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 3dddf65b4f4c451c345d34ae85bdf1791a746e49 upstream.

Put the struct page reference to pfn acquired by hva_to_pfn() when the old and new pfns for a gfn=>pfn cache match. The cache already has a reference via the old/current pfn, and will only put one reference when the cache is done with the pfn.

Fixes 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")

Message-Id: <[email protected]>

---
 virt/kvm/pfncache.c |    8 ++++++++
 1 file changed, 8 insertions(+)
virt/kvm/pfncache.c +8 -0
@@ -206,6 +206,14 @@ int kvm_gfn_to_pfn_cache_refresh(struct
 
 		if (gpc->usage & KVM_HOST_USES_PFN) {
 			if (new_pfn == old_pfn) {
+				/*
+				 * Reuse the existing pfn and khva, but put the
+				 * reference acquired hva_to_pfn_retry(); the
+				 * cache still holds a reference to the pfn
+				 * from the previous refresh.
+				 */
+				gpc_release_pfn_and_khva(kvm, new_pfn, NULL);
+
 				new_khva = old_khva;
 				old_pfn = KVM_PFN_ERR_FAULT;
 				old_khva = NULL;
author maintainer
#27 lore raw

PATCH 29/1157 KVM: Fully serialize gfn=>pfn cache refresh via mutex

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 93984f19e7bce4c18084a6ef3dacafb155b806ed upstream.

Protect gfn=>pfn cache refresh with a mutex to fully serialize refreshes. The refresh logic doesn't protect against

- concurrent unmaps, or refreshes with different GPAs (which may or may not happen in practice, for example if a cache is only used under vcpu->mutex; but it's allowed in the code)

- a false negative on the memslot generation. If the first refresh sees a stale memslot generation, it will refresh the hva and generation before moving on to the hva=>pfn translation. If it then drops gpc->lock, a different user of the cache can come along, acquire gpc->lock, see that the memslot generation is fresh, and skip the hva=>pfn update due to the userspace address also matching (because it too was updated).

The refresh path can already sleep during hva=>pfn resolution, so wrap the refresh with a mutex to ensure that any given refresh runs to completion before other callers can start their refresh.

Message-Id: <[email protected]>

---
 include/linux/kvm_types.h |    2 ++
 virt/kvm/pfncache.c       |   12 ++++++++++++
 2 files changed, 14 insertions(+)
include/linux/kvm_types.h +2 -0
@@ -19,6 +19,7 @@ struct kvm_memslots;
 enum kvm_mr_change;
 
 #include <linux/bits.h>
+#include <linux/mutex.h>
 #include <linux/types.h>
 #include <linux/spinlock_types.h>
 
@@ -69,6 +70,7 @@ struct gfn_to_pfn_cache {
 	struct kvm_vcpu *vcpu;
 	struct list_head list;
 	rwlock_t lock;
+	struct mutex refresh_lock;
 	void *khva;
 	kvm_pfn_t pfn;
 	enum pfn_cache_usage usage;
virt/kvm/pfncache.c +12 -0
@@ -157,6 +157,13 @@ int kvm_gfn_to_pfn_cache_refresh(struct
 	if (page_offset + len > PAGE_SIZE)
 		return -EINVAL;
 
+	/*
+	 * If another task is refreshing the cache, wait for it to complete.
+	 * There is no guarantee that concurrent refreshes will see the same
+	 * gpa, memslots generation, etc..., so they must be fully serialized.
+	 */
+	mutex_lock(&gpc->refresh_lock);
+
 	write_lock_irq(&gpc->lock);
 
 	old_pfn = gpc->pfn;
@@ -250,6 +257,8 @@ int kvm_gfn_to_pfn_cache_refresh(struct
  out:
 	write_unlock_irq(&gpc->lock);
 
+	mutex_unlock(&gpc->refresh_lock);
+
 	gpc_release_pfn_and_khva(kvm, old_pfn, old_khva);
 
 	return ret;
@@ -261,6 +270,7 @@ void kvm_gfn_to_pfn_cache_unmap(struct k
 	void *old_khva;
 	kvm_pfn_t old_pfn;
 
+	mutex_lock(&gpc->refresh_lock);
 	write_lock_irq(&gpc->lock);
 
 	gpc->valid = false;
@@ -276,6 +286,7 @@ void kvm_gfn_to_pfn_cache_unmap(struct k
 	gpc->pfn = KVM_PFN_ERR_FAULT;
 
 	write_unlock_irq(&gpc->lock);
+	mutex_unlock(&gpc->refresh_lock);
 
 	gpc_release_pfn_and_khva(kvm, old_pfn, old_khva);
 }
@@ -290,6 +301,7 @@ int kvm_gfn_to_pfn_cache_init(struct kvm
 
 	if (!gpc->active) {
 		rwlock_init(&gpc->lock);
+		mutex_init(&gpc->refresh_lock);
 
 		gpc->khva = NULL;
 		gpc->pfn = KVM_PFN_ERR_FAULT;
author maintainer
#28 lore raw

PATCH 30/1157 KVM: Fix multiple races in gfn=>pfn cache refresh

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 58cd407ca4c6278cf9f9d09a2e663bf645b0c982 upstream.

Rework the gfn=>pfn cache (gpc) refresh logic to address multiple races between the cache itself, and between the cache and mmu_notifier events.

The existing refresh code attempts to guard against races with the mmu_notifier by speculatively marking the cache valid, and then marking it invalid if a mmu_notifier invalidation occurs. That handles the case where an invalidation occurs between dropping and re-acquiring gpc->lock, but it doesn't handle the scenario where the cache is refreshed after the cache was invalidated by the notifier, but before the notifier elevates mmu_notifier_count. The gpc refresh can't use the "retry" helper as its invalidation occurs _before_ mmu_notifier_count is elevated and before mmu_notifier_range_start is set/updated.

CPU0 CPU1
---- ----

  gfn_to_pfn_cache_invalidate_start()
  |
  -> gpc->valid = false;
                                          kvm_gfn_to_pfn_cache_refresh()
                                          |
                                          |-> gpc->valid = true;
                                          hva_to_pfn_retry()
                                          |
                                          -> acquire kvm->mmu_lock
                                             kvm->mmu_notifier_count == 0
                                             mmu_seq == kvm->mmu_notifier_seq
                                             drop kvm->mmu_lock
                                             return pfn 'X'
  acquire kvm->mmu_lock
  kvm_inc_notifier_count()
  drop kvm->mmu_lock()
  kernel frees pfn 'X'
                                          kvm_gfn_to_pfn_cache_check()
                                          |
                                          |-> gpc->valid == true

                                          caller accesses freed pfn 'X'

Key off of mn_active_invalidate_count to detect that a pfncache refresh needs to wait for an in-progress mmu_notifier invalidation. While mn_active_invalidate_count is not guaranteed to be stable, it is guaranteed to be elevated prior to an invalidation acquiring gpc->lock, so either the refresh will see an active invalidation and wait, or the invalidation will run after the refresh completes.

Speculatively marking the cache valid is itself flawed, as a concurrent kvm_gfn_to_pfn_cache_check() would see a valid cache with stale pfn/khva values. The KVM Xen use case explicitly allows/wants multiple users; even though the caches are allocated per vCPU, __kvm_xen_has_interrupt() can read a different vCPU (or vCPUs). Address this race by invalidating the cache prior to dropping gpc->lock (this is made possible by fixing the above mmu_notifier race).

Complicating all of this is the fact that both the hva=>pfn resolution and mapping of the kernel address can sleep, i.e. must be done outside of gpc->lock.

Fix the above races in one fell swoop, trying to fix each individual race is largely pointless and essentially impossible to test, e.g. closing one hole just shifts the focus to the other hole.

Fixes 982ed0de4753 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc David Woodhouse <[email protected]>
Cc Mingwei Zhang <[email protected]>

Message-Id: <[email protected]>

---
 virt/kvm/kvm_main.c |    9 ++
 virt/kvm/pfncache.c |  193 ++++++++++++++++++++++++++++++++--------------------
 2 files changed, 131 insertions(+), 71 deletions(-)
virt/kvm/kvm_main.c +9 -0
@@ -724,6 +724,15 @@ static int kvm_mmu_notifier_invalidate_r
 	kvm->mn_active_invalidate_count++;
 	spin_unlock(&kvm->mn_invalidate_lock);
 
+	/*
+	 * Invalidate pfn caches _before_ invalidating the secondary MMUs, i.e.
+	 * before acquiring mmu_lock, to avoid holding mmu_lock while acquiring
+	 * each cache's lock.  There are relatively few caches in existence at
+	 * any given time, and the caches themselves can check for hva overlap,
+	 * i.e. don't need to rely on memslot overlap checks for performance.
+	 * Because this runs without holding mmu_lock, the pfn caches must use
+	 * mn_active_invalidate_count (see above) instead of mmu_notifier_count.
+	 */
 	gfn_to_pfn_cache_invalidate_start(kvm, range->start, range->end,
 					  hva_range.may_block);
 
virt/kvm/pfncache.c +122 -71

245 lines not on this page · raw message

author maintainer
#29 lore raw

PATCH 31/1157 KVM: Do not incorporate page offset into gfn=>pfn cache user address

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 3ba2c95ea180740b16281fa43a3ee5f47279c0ed upstream.

Don't adjust the userspace address in the gfn=>pfn cache by the page offset from the gpa. KVM should never use the user address directly, and all KVM operations that translate a user address to something else require the user address to be page aligned. Ignoring the offset will allow the cache to reuse a gfn=>hva translation in the unlikely event that the page offset of the gpa changes, but the gfn does not. And more importantly, not having to (un)adjust the user address will simplify a future bug fix.

Message-Id: <[email protected]>

---
 virt/kvm/pfncache.c |    2 --
 1 file changed, 2 deletions(-)
virt/kvm/pfncache.c +0 -2
@@ -274,8 +274,6 @@ int kvm_gfn_to_pfn_cache_refresh(struct
 			ret = -EFAULT;
 			goto out;
 		}
-
-		gpc->uhva += page_offset;
 	}
 
 	/*
author maintainer
#30 lore raw

PATCH 32/1157 KVM: x86: Split kvm_is_valid_cr4() and export only the non-vendor bits

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit c33f6f2228fe8517e38941a508e9f905f99ecba9 upstream.

Split the common x86 parts of kvm_is_valid_cr4(), i.e. the reserved bits checks, into a separate helper, __kvm_is_valid_cr4(), and export only the inner helper to vendor code in order to prevent nested VMX from calling back into vmx_is_valid_cr4() via kvm_is_valid_cr4().

On SVM, this is a nop as SVM doesn't place any additional restrictions on CR4.

On VMX, this is also currently a nop, but only because nested VMX is missing checks on reserved CR4 bits for nested VM-Enter. That bug will be fixed in a future patch, and could simply use kvm_is_valid_cr4() as-is, but nVMX has _another_ bug where VMXON emulation doesn't enforce VMX's restrictions on CR0/CR4. The cleanest and most intuitive way to fix the VMXON bug is to use nested_host_cr{0,4}_valid(). If the CR4 variant routes through kvm_is_valid_cr4(), using nested_host_cr4_valid() won't do the right thing for the VMXON case as vmx_is_valid_cr4() enforces VMX's restrictions if and only if the vCPU is post-VMXON.

Message-Id: <[email protected]>

---
 arch/x86/kvm/svm/nested.c |    3 ++-
 arch/x86/kvm/vmx/vmx.c    |    4 ++--
 arch/x86/kvm/x86.c        |   12 +++++++++---
 arch/x86/kvm/x86.h        |    2 +-
 4 files changed, 14 insertions(+), 7 deletions(-)
arch/x86/kvm/svm/nested.c +2 -1
@@ -320,7 +320,8 @@ static bool __nested_vmcb_check_save(str
 			return false;
 	}
 
-	if (CC(!kvm_is_valid_cr4(vcpu, save->cr4)))
+	/* Note, SVM doesn't have any additional restrictions on CR4. */
+	if (CC(!__kvm_is_valid_cr4(vcpu, save->cr4)))
 		return false;
 
 	if (CC(!kvm_valid_efer(vcpu, save->efer)))
arch/x86/kvm/vmx/vmx.c +2 -2
@@ -3230,8 +3230,8 @@ static bool vmx_is_valid_cr4(struct kvm_
 {
 	/*
 	 * We operate under the default treatment of SMM, so VMX cannot be
-	 * enabled under SMM.  Note, whether or not VMXE is allowed at all is
-	 * handled by kvm_is_valid_cr4().
+	 * enabled under SMM.  Note, whether or not VMXE is allowed at all,
+	 * i.e. is a reserved bit, is handled by common x86 code.
 	 */
 	if ((cr4 & X86_CR4_VMXE) && is_smm(vcpu))
 		return false;
arch/x86/kvm/x86.c +9 -3
@@ -1094,7 +1094,7 @@ int kvm_emulate_xsetbv(struct kvm_vcpu *
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_xsetbv);
 
-bool kvm_is_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+bool __kvm_is_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	if (cr4 & cr4_reserved_bits)
 		return false;
@@ -1102,9 +1102,15 @@ bool kvm_is_valid_cr4(struct kvm_vcpu *v
 	if (cr4 & vcpu->arch.cr4_guest_rsvd_bits)
 		return false;
 
-	return static_call(kvm_x86_is_valid_cr4)(vcpu, cr4);
+	return true;
+}
+EXPORT_SYMBOL_GPL(__kvm_is_valid_cr4);
+
+static bool kvm_is_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+	return __kvm_is_valid_cr4(vcpu, cr4) &&
+	       static_call(kvm_x86_is_valid_cr4)(vcpu, cr4);
 }
-EXPORT_SYMBOL_GPL(kvm_is_valid_cr4);
 
 void kvm_post_set_cr4(struct kvm_vcpu *vcpu, unsigned long old_cr4, unsigned long cr4)
 {
arch/x86/kvm/x86.h +1 -1
@@ -407,7 +407,7 @@ static inline void kvm_machine_check(voi
 void kvm_load_guest_xsave_state(struct kvm_vcpu *vcpu);
 void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu);
 int kvm_spec_ctrl_test_value(u64 value);
-bool kvm_is_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
+bool __kvm_is_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 int kvm_handle_memory_failure(struct kvm_vcpu *vcpu, int r,
 			      struct x86_exception *e);
 int kvm_handle_invpcid(struct kvm_vcpu *vcpu, unsigned long type, gva_t gva);
author maintainer
#31 lore raw

PATCH 33/1157 KVM: nVMX: Let userspace set nVMX MSR to any _host_ supported value

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit f8ae08f9789ad59d318ea75b570caa454aceda81 upstream.

Restrict the nVMX MSRs based on KVM's config, not based on the guest's current config. Using the guest's config to audit the new config prevents userspace from restoring the original config (KVM's config) if at any point in the past the guest's config was restricted in any way.

Fixes 62cc6b9dc61e ("KVM: nVMX: support restore of VMX capability MSRs")
Cc David Matlack <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/nested.c |   70 ++++++++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 33 deletions(-)
arch/x86/kvm/vmx/nested.c +37 -33
@@ -1223,7 +1223,7 @@ static int vmx_restore_vmx_basic(struct
 		BIT_ULL(49) | BIT_ULL(54) | BIT_ULL(55) |
 		/* reserved */
 		BIT_ULL(31) | GENMASK_ULL(47, 45) | GENMASK_ULL(63, 56);
-	u64 vmx_basic = vmx->nested.msrs.basic;
+	u64 vmx_basic = vmcs_config.nested.basic;
 
 	if (!is_bitwise_subset(vmx_basic, data, feature_and_reserved))
 		return -EINVAL;
@@ -1246,36 +1246,42 @@ static int vmx_restore_vmx_basic(struct
 	return 0;
 }
 
-static int
-vmx_restore_control_msr(struct vcpu_vmx *vmx, u32 msr_index, u64 data)
+static void vmx_get_control_msr(struct nested_vmx_msrs *msrs, u32 msr_index,
+				u32 **low, u32 **high)
 {
-	u64 supported;
-	u32 *lowp, *highp;
-
 	switch (msr_index) {
 	case MSR_IA32_VMX_TRUE_PINBASED_CTLS:
-		lowp = &vmx->nested.msrs.pinbased_ctls_low;
-		highp = &vmx->nested.msrs.pinbased_ctls_high;
+		*low = &msrs->pinbased_ctls_low;
+		*high = &msrs->pinbased_ctls_high;
 		break;
 	case MSR_IA32_VMX_TRUE_PROCBASED_CTLS:
-		lowp = &vmx->nested.msrs.procbased_ctls_low;
-		highp = &vmx->nested.msrs.procbased_ctls_high;
+		*low = &msrs->procbased_ctls_low;
+		*high = &msrs->procbased_ctls_high;
 		break;
 	case MSR_IA32_VMX_TRUE_EXIT_CTLS:
-		lowp = &vmx->nested.msrs.exit_ctls_low;
-		highp = &vmx->nested.msrs.exit_ctls_high;
+		*low = &msrs->exit_ctls_low;
+		*high = &msrs->exit_ctls_high;
 		break;
 	case MSR_IA32_VMX_TRUE_ENTRY_CTLS:
-		lowp = &vmx->nested.msrs.entry_ctls_low;
-		highp = &vmx->nested.msrs.entry_ctls_high;
+		*low = &msrs->entry_ctls_low;
+		*high = &msrs->entry_ctls_high;
 		break;
 	case MSR_IA32_VMX_PROCBASED_CTLS2:
-		lowp = &vmx->nested.msrs.secondary_ctls_low;
-		highp = &vmx->nested.msrs.secondary_ctls_high;
+		*low = &msrs->secondary_ctls_low;
+		*high = &msrs->secondary_ctls_high;
 		break;
 	default:
 		BUG();
 	}
+}
+
+static int
+vmx_restore_control_msr(struct vcpu_vmx *vmx, u32 msr_index, u64 data)
+{
+	u32 *lowp, *highp;
+	u64 supported;
+
+	vmx_get_control_msr(&vmcs_config.nested, msr_index, &lowp, &highp);
 
 	supported = vmx_control_msr(*lowp, *highp);
 
@@ -1287,6 +1293,7 @@ vmx_restore_control_msr(struct vcpu_vmx
 	if (!is_bitwise_subset(supported, data, GENMASK_ULL(63, 32)))
 		return -EINVAL;
 
+	vmx_get_control_msr(&vmx->nested.msrs, msr_index, &lowp, &highp);
 	*lowp = data;
 	*highp = data >> 32;
 	return 0;
@@ -1300,10 +1307,8 @@ static int vmx_restore_vmx_misc(struct v
 		BIT_ULL(28) | BIT_ULL(29) | BIT_ULL(30) |
 		/* reserved */
 		GENMASK_ULL(13, 9) | BIT_ULL(31);
-	u64 vmx_misc;
-
-	vmx_misc = vmx_control_msr(vmx->nested.msrs.misc_low,
-				   vmx->nested.msrs.misc_high);
+	u64 vmx_misc = vmx_control_msr(vmcs_config.nested.misc_low,
+				       vmcs_config.nested.misc_high);
 
 	if (!is_bitwise_subset(vmx_misc, data, feature_and_reserved_bits))
 		return -EINVAL;
@@ -1331,10 +1336,8 @@ static int vmx_restore_vmx_misc(struct v
 
 static int vmx_restore_vmx_ept_vpid_cap(struct vcpu_vmx *vmx, u64 data)
 {
-	u64 vmx_ept_vpid_cap;
-
-	vmx_ept_vpid_cap = vmx_control_msr(vmx->nested.msrs.ept_caps,
-					   vmx->nested.msrs.vpid_caps);
+	u64 vmx_ept_vpid_cap = vmx_control_msr(vmcs_config.nested.ept_caps,
+					       vmcs_config.nested.vpid_caps);
 
 	/* Every bit is either reserved or a feature bit. */
 	if (!is_bitwise_subset(vmx_ept_vpid_cap, data, -1ULL))
@@ -1345,20 +1348,21 @@ static int vmx_restore_vmx_ept_vpid_cap(
 	return 0;
 }
 
-static int vmx_restore_fixed0_msr(struct vcpu_vmx *vmx, u32 msr_index, u64 data)
+static u64 *vmx_get_fixed0_msr(struct nested_vmx_msrs *msrs, u32 msr_index)
 {
-	u64 *msr;
-
 	switch (msr_index) {
 	case MSR_IA32_VMX_CR0_FIXED0:
-		msr = &vmx->nested.msrs.cr0_fixed0;
-		break;
+		return &msrs->cr0_fixed0;
 	case MSR_IA32_VMX_CR4_FIXED0:
-		msr = &vmx->nested.msrs.cr4_fixed0;
-		break;
+		return &msrs->cr4_fixed0;
 	default:
 		BUG();
 	}
+}
+
+static int vmx_restore_fixed0_msr(struct vcpu_vmx *vmx, u32 msr_index, u64 data)
+{
+	const u64 *msr = vmx_get_fixed0_msr(&vmcs_config.nested, msr_index);
 
 	/*
 	 * 1 bits (which indicates bits which "must-be-1" during VMX operation)
@@ -1367,7 +1371,7 @@ static int vmx_restore_fixed0_msr(struct
 	if (!is_bitwise_subset(data, *msr, -1ULL))
 		return -EINVAL;
 
-	*msr = data;
+	*vmx_get_fixed0_msr(&vmx->nested.msrs, msr_index) = data;
 	return 0;
 }
 
@@ -1428,7 +1432,7 @@ int vmx_set_vmx_msr(struct kvm_vcpu *vcp
 		vmx->nested.msrs.vmcs_enum = data;
 		return 0;
 	case MSR_IA32_VMX_VMFUNC:
-		if (data & ~vmx->nested.msrs.vmfunc_controls)
+		if (data & ~vmcs_config.nested.vmfunc_controls)
 			return -EINVAL;
 		vmx->nested.msrs.vmfunc_controls = data;
 		return 0;
author maintainer
#32 lore raw

PATCH 34/1157 KVM: nVMX: Account for KVM reserved CR4 bits in consistency checks

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit ca58f3aa53d165afe4ab74c755bc2f6d168617ac upstream.

Check that the guest (L2) and host (L1) CR4 values that would be loaded by nested VM-Enter and VM-Exit respectively are valid with respect to KVM's (L0 host) allowed CR4 bits. Failure to check KVM reserved bits would allow L1 to load an illegal CR4 (or trigger hardware VM-Fail or failed VM-Entry) by massaging guest CPUID to allow features that are not supported by KVM. Amusingly, KVM itself is an accomplice in its doom, as KVM adjusts L1's MSR_IA32_VMX_CR4_FIXED1 to allow L1 to enable bits for L2 based on L1's CPUID model.

Note, although nested_{guest,host}_cr4_valid() are _currently_ used if and only if the vCPU is post-VMXON (nested.vmxon == true), that may not be true in the future, e.g. emulating VMXON has a bug where it doesn't check the allowed/required CR0/CR4 bits.

Fixes 3899152ccbf4 ("KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation")

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/nested.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/kvm/vmx/nested.h +2 -1
@@ -281,7 +281,8 @@ static inline bool nested_cr4_valid(stru
 	u64 fixed0 = to_vmx(vcpu)->nested.msrs.cr4_fixed0;
 	u64 fixed1 = to_vmx(vcpu)->nested.msrs.cr4_fixed1;
 
-	return fixed_bits_valid(val, fixed0, fixed1);
+	return fixed_bits_valid(val, fixed0, fixed1) &&
+	       __kvm_is_valid_cr4(vcpu, val);
 }
 
 /* No difference in the restrictions on guest and host CR4 in VMX operation. */
author maintainer
#33 lore raw

PATCH 35/1157 KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit c7d855c2aff2d511fd60ee2e356134c4fb394799 upstream.

Inject a #UD if L1 attempts VMXON with a CR0 or CR4 that is disallowed per the associated nested VMX MSRs' fixed0/1 settings. KVM cannot rely on hardware to perform the checks, even for the few checks that have higher priority than VM-Exit, as (a) KVM may have forced CR0/CR4 bits in hardware while running the guest, (b) there may incompatible CR0/CR4 bits that have lower priority than VM-Exit, e.g. CR0.NE, and (c) userspace may have further restricted the allowed CR0/CR4 values by manipulating the guest's nested VMX MSRs.

Note, despite a very strong desire to throw shade at Jim, commit 70f3aac964ae ("kvm: nVMX: Remove superfluous VMX instruction fault checks") is not to blame for the buggy behavior (though the comment...). That commit only removed the CR0.PE, EFLAGS.VM, and COMPATIBILITY mode checks (though it did erroneously drop the CPL check, but that has already been remedied). KVM may force CR0.PE=1, but will do so only when also forcing EFLAGS.VM=1 to emulate Real Mode, i.e. hardware will still #UD.

Fixes ec378aeef9df ("KVM: nVMX: Implement VMXON and VMXOFF")

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/nested.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)
arch/x86/kvm/vmx/nested.c +14 -9
@@ -4968,20 +4968,25 @@ static int handle_vmon(struct kvm_vcpu *
 		| FEAT_CTL_VMX_ENABLED_OUTSIDE_SMX;
 
 	/*
-	 * The Intel VMX Instruction Reference lists a bunch of bits that are
-	 * prerequisite to running VMXON, most notably cr4.VMXE must be set to
-	 * 1 (see vmx_is_valid_cr4() for when we allow the guest to set this).
-	 * Otherwise, we should fail with #UD.  But most faulting conditions
-	 * have already been checked by hardware, prior to the VM-exit for
-	 * VMXON.  We do test guest cr4.VMXE because processor CR4 always has
-	 * that bit set to 1 in non-root mode.
+	 * Note, KVM cannot rely on hardware to perform the CR0/CR4 #UD checks
+	 * that have higher priority than VM-Exit (see Intel SDM's pseudocode
+	 * for VMXON), as KVM must load valid CR0/CR4 values into hardware while
+	 * running the guest, i.e. KVM needs to check the _guest_ values.
+	 *
+	 * Rely on hardware for the other two pre-VM-Exit checks, !VM86 and
+	 * !COMPATIBILITY modes.  KVM may run the guest in VM86 to emulate Real
+	 * Mode, but KVM will never take the guest out of those modes.
 	 */
-	if (!kvm_read_cr4_bits(vcpu, X86_CR4_VMXE)) {
+	if (!nested_host_cr0_valid(vcpu, kvm_read_cr0(vcpu)) ||
+	    !nested_host_cr4_valid(vcpu, kvm_read_cr4(vcpu))) {
 		kvm_queue_exception(vcpu, UD_VECTOR);
 		return 1;
 	}
 
-	/* CPL=0 must be checked manually. */
+	/*
+	 * CPL=0 and all other checks that are lower priority than VM-Exit must
+	 * be checked manually.
+	 */
 	if (vmx_get_cpl(vcpu)) {
 		kvm_inject_gp(vcpu, 0);
 		return 1;
author maintainer
#34 lore raw

PATCH 36/1157 KVM: x86: Mark TSS busy during LTR emulation _after_ all fault checks

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit ec6e4d863258d4bfb36d48d5e3ef68140234d688 upstream.

Wait to mark the TSS as busy during LTR emulation until after all fault checks for the LTR have passed. Specifically, don't mark the TSS busy if the new TSS base is non-canonical.

Opportunistically drop the one-off !seg_desc.PRESENT check for TR as the only reason for the early check was to avoid marking a !PRESENT TSS as busy, i.e. the common !PRESENT is now done before setting the busy bit.

Fixes e37a75a13cda ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Reported-by [email protected]
Cc Tetsuo Handa <[email protected]>
Cc Hou Wenlong <[email protected]>
---
 arch/x86/kvm/emulate.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
arch/x86/kvm/emulate.c +9 -10
@@ -1687,16 +1687,6 @@ static int __load_segment_descriptor(str
 	case VCPU_SREG_TR:
 		if (seg_desc.s || (seg_desc.type != 1 && seg_desc.type != 9))
 			goto exception;
-		if (!seg_desc.p) {
-			err_vec = NP_VECTOR;
-			goto exception;
-		}
-		old_desc = seg_desc;
-		seg_desc.type |= 2; /* busy */
-		ret = ctxt->ops->cmpxchg_emulated(ctxt, desc_addr, &old_desc, &seg_desc,
-						  sizeof(seg_desc), &ctxt->exception);
-		if (ret != X86EMUL_CONTINUE)
-			return ret;
 		break;
 	case VCPU_SREG_LDTR:
 		if (seg_desc.s || seg_desc.type != 2)
@@ -1737,6 +1727,15 @@ static int __load_segment_descriptor(str
 				((u64)base3 << 32), ctxt))
 			return emulate_gp(ctxt, 0);
 	}
+
+	if (seg == VCPU_SREG_TR) {
+		old_desc = seg_desc;
+		seg_desc.type |= 2; /* busy */
+		ret = ctxt->ops->cmpxchg_emulated(ctxt, desc_addr, &old_desc, &seg_desc,
+						  sizeof(seg_desc), &ctxt->exception);
+		if (ret != X86EMUL_CONTINUE)
+			return ret;
+	}
 load:
 	ctxt->ops->set_segment(ctxt, selector, &seg_desc, base3, seg);
 	if (desc)
author maintainer
#35 lore raw

PATCH 37/1157 KVM: x86: Set error code to segment selector on LLDT/LTR non-canonical #GP

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 2626206963ace9e8bf92b6eea5ff78dd674c555c upstream.

When injecting a #GP on LLDT/LTR due to a non-canonical LDT/TSS base, set the error code to the selector. Intel SDM's says nothing about the #GP, but AMD's APM explicitly states that both LLDT and LTR set the error code to the selector, not zero.

Note, a non-canonical memory operand on LLDT/LTR does generate a #GP(0), but the KVM code in question is specific to the base from the descriptor.

---
 arch/x86/kvm/emulate.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kvm/emulate.c +2 -2
@@ -1724,8 +1724,8 @@ static int __load_segment_descriptor(str
 		if (ret != X86EMUL_CONTINUE)
 			return ret;
 		if (emul_is_noncanonical_address(get_desc_base(&seg_desc) |
-				((u64)base3 << 32), ctxt))
-			return emulate_gp(ctxt, 0);
+						 ((u64)base3 << 32), ctxt))
+			return emulate_gp(ctxt, err_code);
 	}
 
 	if (seg == VCPU_SREG_TR) {
author maintainer
#36 lore raw

PATCH 38/1157 KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 6c6ab524cfae0799e55c82b2c1d61f1af0156f8d upstream.

Treat the NX bit as valid when using NPT, as KVM will set the NX bit when the NX huge page mitigation is enabled (mindblowing) and trigger the WARN that fires on reserved SPTE bits being set.

KVM has required NX support for SVM since commit b26a71a1a5b9 ("KVM: SVM:
Refuse to load kvm_amd if NX support is not available") for exactly this reason, but apparently it never occurred to anyone to actually test NPT with the mitigation enabled.

  ------------[ cut here ]------------
  spte = 0x800000018a600ee7, level = 2, rsvd bits = 0x800f0000001fe000
  WARNING: CPU: 152 PID: 15966 at arch/x86/kvm/mmu/spte.c:215 make_spte+0x327/0x340 [kvm]
  Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
  RIP: 0010:make_spte+0x327/0x340 [kvm]
  Call Trace:
   <TASK>
   tdp_mmu_map_handle_target_level+0xc3/0x230 [kvm]
   kvm_tdp_mmu_map+0x343/0x3b0 [kvm]
   direct_page_fault+0x1ae/0x2a0 [kvm]
   kvm_tdp_page_fault+0x7d/0x90 [kvm]
   kvm_mmu_page_fault+0xfb/0x2e0 [kvm]
   npf_interception+0x55/0x90 [kvm_amd]
   svm_invoke_exit_handler+0x31/0xf0 [kvm_amd]
   svm_handle_exit+0xf6/0x1d0 [kvm_amd]
   vcpu_enter_guest+0xb6d/0xee0 [kvm]
   ? kvm_pmu_trigger_event+0x6d/0x230 [kvm]
   vcpu_run+0x65/0x2c0 [kvm]
   kvm_arch_vcpu_ioctl_run+0x355/0x610 [kvm]
   kvm_vcpu_ioctl+0x551/0x610 [kvm]
   __se_sys_ioctl+0x77/0xc0
   __x64_sys_ioctl+0x1d/0x20
   do_syscall_64+0x44/0xa0
   entry_SYSCALL_64_after_hwframe+0x46/0xb0
   </TASK>
  ---[ end trace 0000000000000000 ]---

Message-Id: <[email protected]>

---
 arch/x86/kvm/mmu/mmu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/mmu/mmu.c +1 -1
@@ -4567,7 +4567,7 @@ reset_tdp_shadow_zero_bits_mask(struct k
 
 	if (boot_cpu_is_amd())
 		__reset_rsvds_bits_mask(shadow_zero_check, reserved_hpa_bits(),
-					context->root_role.level, false,
+					context->root_role.level, true,
 					boot_cpu_has(X86_FEATURE_GBPAGES),
 					false, true);
 	else
author maintainer
#37 lore raw

PATCH 39/1157 KVM: SVM: Disable SEV-ES support if MMIO caching is disable

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 0c29397ac1fdd64ae59941a477511a05e61a4754 upstream.

Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs generating #NPF(RSVD), which are reflected by the CPU into the guest as a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access to the guest instruction stream or register state and so can't directly emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT), and those flavors of #NPF cause automatic VM-Exits, not #VC.

Adjust KVM's MMIO masks to account for the C-bit location prior to doing SEV(-ES) setup, and document that dependency between adjusting the MMIO SPTE mask and SEV(-ES) setup.

Fixes b09763da4dd8 ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)")
Cc Tom Lendacky <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/mmu.h      |    2 ++
 arch/x86/kvm/mmu/spte.c |    1 +
 arch/x86/kvm/mmu/spte.h |    2 --
 arch/x86/kvm/svm/sev.c  |   10 ++++++++++
 arch/x86/kvm/svm/svm.c  |    9 ++++++---
 5 files changed, 19 insertions(+), 5 deletions(-)
arch/x86/kvm/mmu.h +2 -0
@@ -11,6 +11,8 @@
 #define PT32_PT_BITS 10
 #define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
 
+extern bool __read_mostly enable_mmio_caching;
+
 #define PT_WRITABLE_SHIFT 1
 #define PT_USER_SHIFT 2
 
arch/x86/kvm/mmu/spte.c +1 -0
@@ -21,6 +21,7 @@
 
 bool __read_mostly enable_mmio_caching = true;
 module_param_named(mmio_caching, enable_mmio_caching, bool, 0444);
+EXPORT_SYMBOL_GPL(enable_mmio_caching);
 
 u64 __read_mostly shadow_host_writable_mask;
 u64 __read_mostly shadow_mmu_writable_mask;
arch/x86/kvm/mmu/spte.h +0 -2
@@ -5,8 +5,6 @@
 
 #include "mmu_internal.h"
 
-extern bool __read_mostly enable_mmio_caching;
-
 /*
  * A MMU present SPTE is backed by actual memory and may or may not be present
  * in hardware.  E.g. MMIO SPTEs are not considered present.  Use bit 11, as it
arch/x86/kvm/svm/sev.c +10 -0
@@ -22,6 +22,7 @@
 #include <asm/trapnr.h>
 #include <asm/fpu/xcr.h>
 
+#include "mmu.h"
 #include "x86.h"
 #include "svm.h"
 #include "svm_ops.h"
@@ -2221,6 +2222,15 @@ void __init sev_hardware_setup(void)
 	if (!sev_es_enabled)
 		goto out;
 
+	/*
+	 * SEV-ES requires MMIO caching as KVM doesn't have access to the guest
+	 * instruction stream, i.e. can't emulate in response to a #NPF and
+	 * instead relies on #NPF(RSVD) being reflected into the guest as #VC
+	 * (the guest can then do a #VMGEXIT to request MMIO emulation).
+	 */
+	if (!enable_mmio_caching)
+		goto out;
+
 	/* Does the CPU support SEV-ES? */
 	if (!boot_cpu_has(X86_FEATURE_SEV_ES))
 		goto out;
arch/x86/kvm/svm/svm.c +6 -3
@@ -4897,13 +4897,16 @@ static __init int svm_hardware_setup(voi
 	/* Setup shadow_me_value and shadow_me_mask */
 	kvm_mmu_set_me_spte_mask(sme_me_mask, sme_me_mask);
 
-	/* Note, SEV setup consumes npt_enabled. */
+	svm_adjust_mmio_mask();
+
+	/*
+	 * Note, SEV setup consumes npt_enabled and enable_mmio_caching (which
+	 * may be modified by svm_adjust_mmio_mask()).
+	 */
 	sev_hardware_setup();
 
 	svm_hv_hardware_setup();
 
-	svm_adjust_mmio_mask();
-
 	for_each_possible_cpu(cpu) {
 		r = svm_cpu_init(cpu);
 		if (r)
author maintainer
#38 lore raw

PATCH 40/1157 KVM: x86: Tag kvm_mmu_x86_module_init() with __init

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit 982bae43f11c37b51d2f1961bb25ef7cac3746fa upstream.

Mark kvm_mmu_x86_module_init() with __init, the entire reason it exists is to initialize variables when kvm.ko is loaded, i.e. it must never be called after module initialization.

Fixes 1d0e84806047 ("KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded")

Message-Id: <[email protected]>

---
 arch/x86/include/asm/kvm_host.h |    2 +-
 arch/x86/kvm/mmu/mmu.c          |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/include/asm/kvm_host.h +1 -1
@@ -1654,7 +1654,7 @@ static inline int kvm_arch_flush_remote_
 #define kvm_arch_pmi_in_guest(vcpu) \
 	((vcpu) && (vcpu)->arch.handling_intr_from_guest)
 
-void kvm_mmu_x86_module_init(void);
+void __init kvm_mmu_x86_module_init(void);
 int kvm_mmu_vendor_module_init(void);
 void kvm_mmu_vendor_module_exit(void);
 
arch/x86/kvm/mmu/mmu.c +1 -1
@@ -6275,7 +6275,7 @@ static int set_nx_huge_pages(const char
  * nx_huge_pages needs to be resolved to true/false when kvm.ko is loaded, as
  * its default value of -1 is technically undefined behavior for a boolean.
  */
-void kvm_mmu_x86_module_init(void)
+void __init kvm_mmu_x86_module_init(void)
 {
 	if (nx_huge_pages == -1)
 		__set_nx_huge_pages(get_nx_auto_mode());
author maintainer
#39 lore raw

PATCH 41/1157 KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

commit c3e0c8c2e8b17bae30d5978bc2decdd4098f0f99 upstream.

Fully re-evaluate whether or not MMIO caching can be enabled when SPTE masks change; simply clearing enable_mmio_caching when a configuration isn't compatible with caching fails to handle the scenario where the masks are updated, e.g. by VMX for EPT or by SVM to account for the C-bit location, and toggle compatibility from false=>true.

Snapshot the original module param so that re-evaluating MMIO caching preserves userspace's desire to allow caching. Use a snapshot approach so that enable_mmio_caching still reflects KVM's actual behavior.

Fixes 8b9e74bfbf8c ("KVM: x86/mmu: Use enable_mmio_caching to track if MMIO caching is enabled")
Cc Tom Lendacky <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/mmu/mmu.c  |    4 ++++
 arch/x86/kvm/mmu/spte.c |   19 +++++++++++++++++++
 arch/x86/kvm/mmu/spte.h |    1 +
 3 files changed, 24 insertions(+)
arch/x86/kvm/mmu/mmu.c +4 -0
@@ -6274,11 +6274,15 @@ static int set_nx_huge_pages(const char
 /*
  * nx_huge_pages needs to be resolved to true/false when kvm.ko is loaded, as
  * its default value of -1 is technically undefined behavior for a boolean.
+ * Forward the module init call to SPTE code so that it too can handle module
+ * params that need to be resolved/snapshot.
  */
 void __init kvm_mmu_x86_module_init(void)
 {
 	if (nx_huge_pages == -1)
 		__set_nx_huge_pages(get_nx_auto_mode());
+
+	kvm_mmu_spte_module_init();
 }
 
 /*
arch/x86/kvm/mmu/spte.c +19 -0
@@ -20,6 +20,7 @@
 #include <asm/vmx.h>
 
 bool __read_mostly enable_mmio_caching = true;
+static bool __ro_after_init allow_mmio_caching;
 module_param_named(mmio_caching, enable_mmio_caching, bool, 0444);
 EXPORT_SYMBOL_GPL(enable_mmio_caching);
 
@@ -43,6 +44,18 @@ u64 __read_mostly shadow_nonpresent_or_r
 
 u8 __read_mostly shadow_phys_bits;
 
+void __init kvm_mmu_spte_module_init(void)
+{
+	/*
+	 * Snapshot userspace's desire to allow MMIO caching.  Whether or not
+	 * KVM can actually enable MMIO caching depends on vendor-specific
+	 * hardware capabilities and other module params that can't be resolved
+	 * until the vendor module is loaded, i.e. enable_mmio_caching can and
+	 * will change when the vendor module is (re)loaded.
+	 */
+	allow_mmio_caching = enable_mmio_caching;
+}
+
 static u64 generation_mmio_spte_mask(u64 gen)
 {
 	u64 mask;
@@ -338,6 +351,12 @@ void kvm_mmu_set_mmio_spte_mask(u64 mmio
 	BUG_ON((u64)(unsigned)access_mask != access_mask);
 	WARN_ON(mmio_value & shadow_nonpresent_or_rsvd_lower_gfn_mask);
 
+	/*
+	 * Reset to the original module param value to honor userspace's desire
+	 * to (dis)allow MMIO caching.  Update the param itself so that
+	 * userspace can see whether or not KVM is actually using MMIO caching.
+	 */
+	enable_mmio_caching = allow_mmio_caching;
 	if (!enable_mmio_caching)
 		mmio_value = 0;
 
arch/x86/kvm/mmu/spte.h +1 -0
@@ -444,6 +444,7 @@ static inline u64 restore_acc_track_spte
 
 u64 kvm_mmu_changed_pte_notifier_make_spte(u64 old_spte, kvm_pfn_t new_pfn);
 
+void __init kvm_mmu_spte_module_init(void);
 void kvm_mmu_reset_all_pte_masks(void);
 
 #endif
author maintainer
#40 lore raw

PATCH 42/1157 KVM: x86: do not report preemption if the steal time cache is stale

In reply to Greg Kroah-Hartman

From: Paolo Bonzini <[email protected]>

commit c3c28d24d910a746b02f496d190e0e8c6560224b upstream.

Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the preempted bit is written at the address used by the old kernel instead of the old one.

Cc David Woodhouse <[email protected]>
Fixes 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status")
---
 arch/x86/kvm/x86.c |    2 ++
 1 file changed, 2 insertions(+)
arch/x86/kvm/x86.c +2 -0
@@ -4635,6 +4635,7 @@ static void kvm_steal_time_set_preempted
 	struct kvm_steal_time __user *st;
 	struct kvm_memslots *slots;
 	static const u8 preempted = KVM_VCPU_PREEMPTED;
+	gpa_t gpa = vcpu->arch.st.msr_val & KVM_STEAL_VALID_BITS;
 
 	/*
 	 * The vCPU can be marked preempted if and only if the VM-Exit was on
@@ -4662,6 +4663,7 @@ static void kvm_steal_time_set_preempted
 	slots = kvm_memslots(vcpu->kvm);
 
 	if (unlikely(slots->generation != ghc->generation ||
+		     gpa != ghc->gpa ||
 		     kvm_is_error_hva(ghc->hva) || !ghc->memslot))
 		return;
 
author maintainer
#41 lore raw

PATCH 43/1157 KVM: x86: revalidate steal time cache if MSR value changes

In reply to Greg Kroah-Hartman

From: Paolo Bonzini <[email protected]>

commit 901d3765fa804ce42812f1d5b1f3de2dfbb26723 upstream.

Commit 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status", 2021-11-11) open coded the previous call to kvm_map_gfn, but in doing so it dropped the comparison between the cached guest physical address and the one in the MSR. This cause an incorrect cache hit if the guest modifies the steal time address while the memslots remain the same. This can happen with kexec, in which case the steal time data is written at the address used by the old kernel instead of the old one.

While at it, rename the variable from gfn to gpa since it is a plain physical address and not a right-shifted one.

Cc David Woodhouse <[email protected]>
Fixes 7e2175ebd695 ("KVM: x86: Fix recording of guest steal time / preempted status")
---
 arch/x86/kvm/x86.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/kvm/x86.c +3 -3
@@ -3386,6 +3386,7 @@ static void record_steal_time(struct kvm
 	struct gfn_to_hva_cache *ghc = &vcpu->arch.st.cache;
 	struct kvm_steal_time __user *st;
 	struct kvm_memslots *slots;
+	gpa_t gpa = vcpu->arch.st.msr_val & KVM_STEAL_VALID_BITS;
 	u64 steal;
 	u32 version;
 
@@ -3403,13 +3404,12 @@ static void record_steal_time(struct kvm
 	slots = kvm_memslots(vcpu->kvm);
 
 	if (unlikely(slots->generation != ghc->generation ||
+		     gpa != ghc->gpa ||
 		     kvm_is_error_hva(ghc->hva) || !ghc->memslot)) {
-		gfn_t gfn = vcpu->arch.st.msr_val & KVM_STEAL_VALID_BITS;
-
 		/* We rely on the fact that it fits in a single page. */
 		BUILD_BUG_ON((sizeof(*st) - 1) & KVM_STEAL_VALID_BITS);
 
-		if (kvm_gfn_to_hva_cache_init(vcpu->kvm, ghc, gfn, sizeof(*st)) ||
+		if (kvm_gfn_to_hva_cache_init(vcpu->kvm, ghc, gpa, sizeof(*st)) ||
 		    kvm_is_error_hva(ghc->hva) || !ghc->memslot)
 			return;
 	}
author maintainer
#42 lore raw

PATCH 44/1157 KVM: x86/xen: Initialize Xen timer only once

In reply to Greg Kroah-Hartman

From: Coleman Dietsch <[email protected]>

commit af735db31285fa699384c649be72a9f32ecbb665 upstream.

Add a check for existing xen timers before initializing a new one.

Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set.

ODEBUG: init active (active state 0)
object type: hrtimer hint: xen_timer_callbac0

RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502
Call Trace:

__debug_object_init
debug_hrtimer_init
debug_init
hrtimer_init
kvm_xen_init_timer
kvm_xen_vcpu_set_attr
kvm_arch_vcpu_ioctl
kvm_vcpu_ioctl
vfs_ioctl

Message-Id: <[email protected]>

---
 arch/x86/kvm/xen.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/x86/kvm/xen.c +3 -1
@@ -713,7 +713,9 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcp
 				break;
 			}
 			vcpu->arch.xen.timer_virq = data->u.timer.port;
-			kvm_xen_init_timer(vcpu);
+
+			if (!vcpu->arch.xen.timer.function)
+				kvm_xen_init_timer(vcpu);
 
 			/* Restart the timer if it's set */
 			if (data->u.timer.expires_ns)
author maintainer
#43 lore raw

PATCH 45/1157 KVM: x86/xen: Stop Xen timer before changing IRQ

In reply to Greg Kroah-Hartman

From: Coleman Dietsch <[email protected]>

commit c036899136355758dcd88878145036ab4d9c1f26 upstream.

Stop Xen timer (if it's running) prior to changing the IRQ vector and potentially (re)starting the timer. Changing the IRQ vector while the timer is still running can result in KVM injecting a garbage event, e.g. vm_xen_inject_timer_irqs() could see a non-zero xen.timer_pending from a previous timer but inject the new xen.timer_virq.

Message-Id: <[email protected]>

---
 arch/x86/kvm/xen.c |   33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)
arch/x86/kvm/xen.c +16 -17
@@ -707,25 +707,24 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcp
 		break;
 
 	case KVM_XEN_VCPU_ATTR_TYPE_TIMER:
-		if (data->u.timer.port) {
-			if (data->u.timer.priority != KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL) {
-				r = -EINVAL;
-				break;
-			}
-			vcpu->arch.xen.timer_virq = data->u.timer.port;
+		if (data->u.timer.port &&
+		    data->u.timer.priority != KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL) {
+			r = -EINVAL;
+			break;
+		}
 
-			if (!vcpu->arch.xen.timer.function)
-				kvm_xen_init_timer(vcpu);
+		if (!vcpu->arch.xen.timer.function)
+			kvm_xen_init_timer(vcpu);
 
-			/* Restart the timer if it's set */
-			if (data->u.timer.expires_ns)
-				kvm_xen_start_timer(vcpu, data->u.timer.expires_ns,
-						    data->u.timer.expires_ns -
-						    get_kvmclock_ns(vcpu->kvm));
-		} else if (kvm_xen_timer_enabled(vcpu)) {
-			kvm_xen_stop_timer(vcpu);
-			vcpu->arch.xen.timer_virq = 0;
-		}
+		/* Stop the timer (if it's running) before changing the vector */
+		kvm_xen_stop_timer(vcpu);
+		vcpu->arch.xen.timer_virq = data->u.timer.port;
+
+		/* Start the timer if the new value has a valid vector+expiry. */
+		if (data->u.timer.port && data->u.timer.expires_ns)
+			kvm_xen_start_timer(vcpu, data->u.timer.expires_ns,
+					    data->u.timer.expires_ns -
+					    get_kvmclock_ns(vcpu->kvm));
 
 		r = 0;
 		break;
author maintainer
#44 lore raw

PATCH 46/1157 ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit f83bb2592482fe94c6eea07a8121763c80f36ce5 upstream.

There is another LENOVO 20149 (Type1Sku0) Notebook model with CX20590, the device PCI SSID is 17aa:3977, which headphones are not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK. Add the corresponding entry to the quirk table.

---
 sound/pci/hda/patch_conexant.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
sound/pci/hda/patch_conexant.c +10 -1
@@ -222,6 +222,7 @@ enum {
 	CXT_PINCFG_LEMOTE_A1205,
 	CXT_PINCFG_COMPAQ_CQ60,
 	CXT_FIXUP_STEREO_DMIC,
+	CXT_PINCFG_LENOVO_NOTEBOOK,
 	CXT_FIXUP_INC_MIC_BOOST,
 	CXT_FIXUP_HEADPHONE_MIC_PIN,
 	CXT_FIXUP_HEADPHONE_MIC,
@@ -772,6 +773,14 @@ static const struct hda_fixup cxt_fixups
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_stereo_dmic,
 	},
+	[CXT_PINCFG_LENOVO_NOTEBOOK] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x1a, 0x05d71030 },
+			{ }
+		},
+		.chain_id = CXT_FIXUP_STEREO_DMIC,
+	},
 	[CXT_FIXUP_INC_MIC_BOOST] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt5066_increase_mic_boost,
@@ -971,7 +980,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x17aa, 0x3905, "Lenovo G50-30", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x390b, "Lenovo G50-80", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
-	SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
+	SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_PINCFG_LENOVO_NOTEBOOK),
 	SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo G50-70", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI),
author maintainer
#45 lore raw

PATCH 47/1157 ALSA: hda/cirrus - support for iMac 12,1 model

In reply to Greg Kroah-Hartman

From: Allen Ballway <[email protected]>

commit 74bba640d69914cf832b87f6bbb700e5ba430672 upstream.

The 12,1 model requires the same configuration as the 12,2 model to enable headphones but has a different codec SSID. Adds 12,1 SSID for matching quirk.

[ re-sorted in SSID order by tiwai ]

---
 sound/pci/hda/patch_cirrus.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_cirrus.c +1 -0
@@ -395,6 +395,7 @@ static const struct snd_pci_quirk cs420x
 
 	/* codec SSID */
 	SND_PCI_QUIRK(0x106b, 0x0600, "iMac 14,1", CS420X_IMAC27_122),
+	SND_PCI_QUIRK(0x106b, 0x0900, "iMac 12,1", CS420X_IMAC27_122),
 	SND_PCI_QUIRK(0x106b, 0x1c00, "MacBookPro 8,1", CS420X_MBP81),
 	SND_PCI_QUIRK(0x106b, 0x2000, "iMac 12,2", CS420X_IMAC27_122),
 	SND_PCI_QUIRK(0x106b, 0x2800, "MacBookPro 10,1", CS420X_MBP101),
author maintainer
#46 lore raw

PATCH 48/1157 ALSA: hda/realtek: Add quirk for another Asus K42JZ model

In reply to Greg Kroah-Hartman

From: Meng Tang <[email protected]>

commit f882c4bef9cb914d9f7be171afb10ed26536bfa7 upstream.

There is another Asus K42JZ model with the PCI SSID 1043:1313 that requires the quirk ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE. Add the corresponding entry to the quirk table.

---
 sound/pci/hda/patch_realtek.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
sound/pci/hda/patch_realtek.c +11 -0
@@ -6879,6 +6879,7 @@ enum {
 	ALC269_FIXUP_LIMIT_INT_MIC_BOOST,
 	ALC269VB_FIXUP_ASUS_ZENBOOK,
 	ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A,
+	ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE,
 	ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED,
 	ALC269VB_FIXUP_ORDISSIMO_EVE2,
 	ALC283_FIXUP_CHROME_BOOK,
@@ -7466,6 +7467,15 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269VB_FIXUP_ASUS_ZENBOOK,
 	},
+	[ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x18, 0x01a110f0 },  /* use as headset mic */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MIC
+	},
 	[ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc269_fixup_limit_int_mic_boost,
@@ -9237,6 +9247,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x12a0, "ASUS X441UV", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1313, "Asus K42JZ", ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
 	SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
author maintainer
#47 lore raw

PATCH 49/1157 ALSA: hda/realtek: Add a quirk for HP OMEN 15 (8786) mute LED

In reply to Greg Kroah-Hartman

From: Bedant Patnaik <[email protected]>

commit 30267718fe2d4dbea49015b022f6f1fe16ca31ab upstream.

Board ID 8786 seems to be another variant of the Omen 15 that needs ALC285_FIXUP_HP_MUTE_LED for working mute LED.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -9178,6 +9178,7 @@ static const struct snd_pci_quirk alc269
 		      ALC285_FIXUP_HP_GPIO_AMP_INIT),
 	SND_PCI_QUIRK(0x103c, 0x8783, "HP ZBook Fury 15 G7 Mobile Workstation",
 		      ALC285_FIXUP_HP_GPIO_AMP_INIT),
+	SND_PCI_QUIRK(0x103c, 0x8786, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8787, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8788, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x87c8, "HP", ALC287_FIXUP_HP_GPIO_LED),
author maintainer
#48 lore raw

PATCH 50/1157 LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

In reply to Greg Kroah-Hartman

From: Huacai Chen <[email protected]>

commit 28e112afa44ad0814120d41c68fa72372a2cd2c2 upstream.

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected, cpu_max_bits_warn() generates a runtime warning similar as below while we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.084034] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<900000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---
---
 arch/loongarch/kernel/proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/loongarch/kernel/proc.c +1 -1
@@ -106,7 +106,7 @@ static void *c_start(struct seq_file *m,
 {
 	unsigned long i = *pos;
 
-	return i < NR_CPUS ? (void *)(i + 1) : NULL;
+	return i < nr_cpu_ids ? (void *)(i + 1) : NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
author maintainer
#49 lore raw

PATCH 51/1157 tty: 8250: Add support for Brainboxes PX cards.

In reply to Greg Kroah-Hartman

From: Cameron Williams <[email protected]>

commit ef5a03a26c87a760bc3d86b5af7b773e82f8b1b7 upstream.

Add support for some of the Brainboxes PCIe (PX) range of serial cards, including the PX-101, PX-235/PX-246, PX-203/PX-257, PX-260/PX-701, PX-310, PX-313, PX-320/PX-324/PX-376/PX-387, PX-335/PX-346, PX-368, PX-420, PX-803 and PX-846.

---
 drivers/tty/serial/8250/8250_pci.c |  109 +++++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)
drivers/tty/serial/8250/8250_pci.c +109 -0
@@ -5077,6 +5077,115 @@ static const struct pci_device_id serial
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
+	 * Brainboxes PX-101
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4005,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4019,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * Brainboxes PX-235/246
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4004,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4016,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes PX-203/PX-257
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4006,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4015,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-260/PX-701
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400A,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-310
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400E,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * Brainboxes PX-313
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400C,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * Brainboxes PX-320/324/PX-376/PX-387
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400B,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes PX-335/346
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400F,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-368
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x4010,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-420
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4000,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4011,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-803
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4009,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x401E,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes PX-846
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4008,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4017,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+
+	/*
 	 * Perle PCI-RAS cards
 	 */
 	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
author maintainer
#50 lore raw

PATCH 52/1157 tty: vt: initialize unicode screen buffer

In reply to Greg Kroah-Hartman

From: Tetsuo Handa <[email protected]>

commit af77c56aa35325daa2bc2bed5c2ebf169be61b86 upstream.

syzbot reports kernel infoleak at vcs_read() [1], for buffer can be read immediately after resize operation. Initialize buffer using kzalloc().

  ----------
  #include <fcntl.h>
  #include <unistd.h>
  #include <sys/ioctl.h>
  #include <linux/fb.h>

  int main(int argc, char *argv[])
  {
    struct fb_var_screeninfo var = { };
    const int fb_fd = open("/dev/fb0", 3);
    ioctl(fb_fd, FBIOGET_VSCREENINFO, &var);
    var.yres = 0x21;
    ioctl(fb_fd, FBIOPUT_VSCREENINFO, &var);
    return read(open("/dev/vcsu", O_RDONLY), &var, sizeof(var)) == -1;
  }
  ----------
---
 drivers/tty/vt/vt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/vt/vt.c +1 -1
@@ -344,7 +344,7 @@ static struct uni_screen *vc_uniscr_allo
 	/* allocate everything in one go */
 	memsize = cols * rows * sizeof(char32_t);
 	memsize += rows * sizeof(char32_t *);
-	p = vmalloc(memsize);
+	p = vzalloc(memsize);
 	if (!p)
 		return NULL;
 
author maintainer
#51 lore raw

PATCH 53/1157 vfs: Check the truncate maximum size in inode_newsize_ok()

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

commit e2ebff9c57fe4eb104ce4768f6ebcccf76bef849 upstream.

If something manages to set the maximum file size to MAX_OFFSET+1, this can cause the xfs and ext4 filesystems at least to become corrupt.

Ordinarily, the kernel protects against userspace trying this by checking the value early in the truncate() and ftruncate() system calls calls - but there are at least two places that this check is bypassed:

(1) Cachefiles will round up the EOF of the backing file to DIO block size so as to allow DIO on the final block - but this might push the offset negative. It then calls notify_change(), but this inadvertently bypasses the checking. This can be triggered if someone puts an 8EiB-1 file on a server for someone else to try and access by, say, nfs.

(2) ksmbd doesn't check the value it is given in set_end_of_file_info() and then calls vfs_truncate() directly - which also bypasses the check.

In both cases, it is potentially possible for a network filesystem to cause a disk filesystem to be corrupted: cachefiles in the client's cache filesystem; ksmbd in the server's filesystem.

nfsd is okay as it checks the value, but we can then remove this check too.

Fix this by adding a check to inode_newsize_ok(), as called from setattr_prepare(), thereby catching the issue as filesystems set up to perform the truncate with minimal opportunity for bypassing the new check.

Fixes 1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
Fixes f44158485826 ("cifsd: add file operations")
cc Steve French <[email protected]>
cc Hyunchul Lee <[email protected]>
cc Chuck Lever <[email protected]>
cc Dave Wysochanski <[email protected]>
---
 fs/attr.c |    2 ++
 1 file changed, 2 insertions(+)
fs/attr.c +2 -0
@@ -184,6 +184,8 @@ EXPORT_SYMBOL(setattr_prepare);
  */
 int inode_newsize_ok(const struct inode *inode, loff_t offset)
 {
+	if (offset < 0)
+		return -EINVAL;
 	if (inode->i_size < offset) {
 		unsigned long limit;
 
author maintainer
#52 lore raw

PATCH 54/1157 fs: Add missing umask strip in vfs_tmpfile

In reply to Greg Kroah-Hartman

From: Yang Xu <[email protected]>

commit ac6800e279a22b28f4fc21439843025a0d5bf03e upstream.

All creation paths except for O_TMPFILE handle umask in the vfs directly if the filesystem doesn't support or enable POSIX ACLs. If the filesystem does then umask handling is deferred until posix_acl_create(). Because, O_TMPFILE misses umask handling in the vfs it will not honor umask settings. Fix this by adding the missing umask handling.

---
 fs/namei.c |    2 ++
 1 file changed, 2 insertions(+)
fs/namei.c +2 -0
@@ -3565,6 +3565,8 @@ struct dentry *vfs_tmpfile(struct user_n
 	child = d_alloc(dentry, &slash_name);
 	if (unlikely(!child))
 		goto out_err;
+	if (!IS_POSIXACL(dir))
+		mode &= ~current_umask();
 	error = dir->i_op->tmpfile(mnt_userns, dir, child, mode);
 	if (error)
 		goto out_err;
author maintainer
#53 lore raw

PATCH 55/1157 thermal: sysfs: Fix cooling_device_stats_setup() error code path

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

commit d5a8aa5d7d80d21ab6b266f1bed4194b61746199 upstream.

If cooling_device_stats_setup() fails to create the stats object, it must clear the last slot in cooling_device_attr_groups that was initially empty (so as to make it possible to add stats attributes to the cooling device attribute groups).

Failing to do so may cause the stats attributes to be created by mistake for a device that doesn't have a stats object, because the slot in question might be populated previously during the registration of another cooling device.

Fixes 8ea229511e06 ("thermal: Add cooling device's statistics in sysfs")
Cc 4.17+ <[email protected]> # 4.17+
---
 drivers/thermal/thermal_sysfs.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/thermal/thermal_sysfs.c +7 -3
@@ -813,12 +813,13 @@ static const struct attribute_group cool
 
 static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
 {
+	const struct attribute_group *stats_attr_group = NULL;
 	struct cooling_dev_stats *stats;
 	unsigned long states;
 	int var;
 
 	if (cdev->ops->get_max_state(cdev, &states))
-		return;
+		goto out;
 
 	states++; /* Total number of states is highest state + 1 */
 
@@ -828,7 +829,7 @@ static void cooling_device_stats_setup(s
 
 	stats = kzalloc(var, GFP_KERNEL);
 	if (!stats)
-		return;
+		goto out;
 
 	stats->time_in_state = (ktime_t *)(stats + 1);
 	stats->trans_table = (unsigned int *)(stats->time_in_state + states);
@@ -838,9 +839,12 @@ static void cooling_device_stats_setup(s
 
 	spin_lock_init(&stats->lock);
 
+	stats_attr_group = &cooling_device_stats_attr_group;
+
+out:
 	/* Fill the empty slot left in cooling_device_attr_groups */
 	var = ARRAY_SIZE(cooling_device_attr_groups) - 2;
-	cooling_device_attr_groups[var] = &cooling_device_stats_attr_group;
+	cooling_device_attr_groups[var] = stats_attr_group;
 }
 
 static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
author maintainer
#54 lore raw

PATCH 56/1157 fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit cad564ca557f8d3bb3b1fa965d9a2b3f6490ec69 upstream.

The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take over the given range (n1...n2) of consoles. The value for n1 and n2 needs to be a positive number and up to (MAX_NR_CONSOLES - 1). The given values were not fully checked against those boundaries yet.

To fix the issue, convert first_fb_vc and last_fb_vc to unsigned integers and check them against the upper boundary, and make sure that first_fb_vc is smaller than last_fb_vc.

---
 drivers/video/fbdev/core/fbcon.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/video/fbdev/core/fbcon.c +5 -3
@@ -125,8 +125,8 @@ static int logo_lines;
    enums.  */
 static int logo_shown = FBCON_LOGO_CANSHOW;
 /* console mappings */
-static int first_fb_vc;
-static int last_fb_vc = MAX_NR_CONSOLES - 1;
+static unsigned int first_fb_vc;
+static unsigned int last_fb_vc = MAX_NR_CONSOLES - 1;
 static int fbcon_is_default = 1; 
 static int primary_device = -1;
 static int fbcon_has_console_bind;
@@ -440,10 +440,12 @@ static int __init fb_console_setup(char
 			options += 3;
 			if (*options)
 				first_fb_vc = simple_strtoul(options, &options, 10) - 1;
-			if (first_fb_vc < 0)
+			if (first_fb_vc >= MAX_NR_CONSOLES)
 				first_fb_vc = 0;
 			if (*options++ == '-')
 				last_fb_vc = simple_strtoul(options, &options, 10) - 1;
+			if (last_fb_vc < first_fb_vc || last_fb_vc >= MAX_NR_CONSOLES)
+				last_fb_vc = MAX_NR_CONSOLES - 1;
 			fbcon_is_default = 0; 
 			continue;
 		}
author maintainer
#55 lore raw

PATCH 57/1157 fbcon: Fix accelerated fbdev scrolling while logo is still shown

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit 3866cba87dcd0162fb41e9b3b653d0af68fad5ec upstream.

There is no need to directly skip over to the SCROLL_REDRAW case while the logo is still shown.

When using DRM, this change has no effect because the code will reach the SCROLL_REDRAW case immediately anyway.

But if you run an accelerated fbdev driver and have FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is slowed down by factors so that it feels as if you use a 9600 baud terminal.

So, drop those unnecessary checks and speed up fbdev console acceleration during bootup.

---
 drivers/video/fbdev/core/fbcon.c |    4 ----
 1 file changed, 4 deletions(-)
drivers/video/fbdev/core/fbcon.c +0 -4
@@ -1760,8 +1760,6 @@ static bool fbcon_scroll(struct vc_data
 	case SM_UP:
 		if (count > vc->vc_rows)	/* Maximum realistic size */
 			count = vc->vc_rows;
-		if (logo_shown >= 0)
-			goto redraw_up;
 		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, t, b - t - count,
@@ -1850,8 +1848,6 @@ static bool fbcon_scroll(struct vc_data
 	case SM_DOWN:
 		if (count > vc->vc_rows)	/* Maximum realistic size */
 			count = vc->vc_rows;
-		if (logo_shown >= 0)
-			goto redraw_down;
 		switch (fb_scrollmode(p)) {
 		case SCROLL_MOVE:
 			fbcon_redraw_blit(vc, info, p, b - 1, b - t - count,
author maintainer
#56 lore raw

PATCH 58/1157 usbnet: Fix linkwatch use-after-free on disconnect

In reply to Greg Kroah-Hartman

From: Lukas Wunner <[email protected]>

commit a69e617e533edddf3fa3123149900f36e0a6dc74 upstream.

usbnet uses the work usbnet_deferred_kevent() to perform tasks which may sleep. On disconnect, completion of the work was originally awaited in ->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":

https://git.kernel.org/tglx/history/c/0f138bbfd83c

The change was made because back then, the kernel's workqueue implementation did not allow waiting for a single work. One had to wait for completion of *all* work by calling flush_scheduled_work(), and that could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex held in ->ndo_stop().

The commit solved one problem but created another: It causes a use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c, ax88179_178a.c, ch9200.c and smsc75xx.c:

* If the drivers receive a link change interrupt immediately before disconnect, they raise EVENT_LINK_RESET in their (non-sleepable) ->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback, which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().

Because usbnet_deferred_kevent() is awaited after unregister_netdev(), netif_carrier_{on,off}() may operate on an unregistered netdev and linkwatch_event() may run after free_netdev(), causing a use-after-free.

In 2010, usbnet was changed to only wait for a single instance of usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf ("drivers/net: don't use flush_scheduled_work()").

Unfortunately the commit neglected to move the wait back to ->ndo_stop(). Rectify that omission at long last.

---
 drivers/net/usb/usbnet.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/net/usb/usbnet.c +2 -6
@@ -849,13 +849,11 @@ int usbnet_stop (struct net_device *net)
 
 	mpn = !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
 
-	/* deferred work (task, timer, softirq) must also stop.
-	 * can't flush_scheduled_work() until we drop rtnl (later),
-	 * else workers could deadlock; so make workers a NOP.
-	 */
+	/* deferred work (timer, softirq, task) must also stop */
 	dev->flags = 0;
 	del_timer_sync (&dev->delay);
 	tasklet_kill (&dev->bh);
+	cancel_work_sync(&dev->kevent);
 	if (!pm)
 		usb_autopm_put_interface(dev->intf);
 
@@ -1619,8 +1617,6 @@ void usbnet_disconnect (struct usb_inter
 	net = dev->net;
 	unregister_netdev (net);
 
-	cancel_work_sync(&dev->kevent);
-
 	usb_scuttle_anchored_urbs(&dev->deferred);
 
 	if (dev->driver_info->unbind)
author maintainer
#57 lore raw

PATCH 59/1157 usbnet: smsc95xx: Fix deadlock on runtime resume

In reply to Greg Kroah-Hartman

From: Lukas Wunner <[email protected]>

commit 7b960c967f2aa01ab8f45c5a0bd78e754cffdeee upstream.

Commit 05b35e7eb9a1 ("smsc95xx: add phylib support") amended smsc95xx_resume() to call phy_init_hw(). That function waits for the device to runtime resume even though it is placed in the runtime resume path, causing a deadlock.

The problem is that phy_init_hw() calls down to smsc95xx_mdiobus_read(), which never uses the _nopm variant of usbnet_read_cmd().

Commit b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation") causes a similar deadlock on resume if the device was already runtime suspended when entering system sleep:

That's because the commit introduced smsc95xx_reset_resume(), which calls down to smsc95xx_reset(), which neglects to use _nopm accessors.

Fix by auto-detecting whether a device access is performed by the suspend/resume task_struct and use the _nopm variant if so. This works because the PM core guarantees that suspend/resume callbacks are run in task context.

Stacktrace for posterity:

  INFO: task kworker/2:1:49 blocked for more than 122 seconds.
  Workqueue: usb_hub_wq hub_event
  schedule
  rpm_resume
  __pm_runtime_resume
  usb_autopm_get_interface
  usbnet_read_cmd
  __smsc95xx_read_reg
  __smsc95xx_phy_wait_not_busy
  __smsc95xx_mdio_read
  smsc95xx_mdiobus_read
  __mdiobus_read
  mdiobus_read
  smsc_phy_reset
  phy_init_hw
  smsc95xx_resume
  usb_resume_interface
  usb_resume_both
  usb_runtime_resume
  __rpm_callback
  rpm_callback
  rpm_resume
  __pm_runtime_resume
  usb_autoresume_device
  hub_event
  process_one_work
Fixes b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation")
Cc [email protected] # v3.16+
Cc Andre Edich <[email protected]>
---
 drivers/net/usb/smsc95xx.c |   26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)
drivers/net/usb/smsc95xx.c +20 -6
@@ -71,6 +71,7 @@ struct smsc95xx_priv {
 	struct fwnode_handle *irqfwnode;
 	struct mii_bus *mdiobus;
 	struct phy_device *phydev;
+	struct task_struct *pm_task;
 };
 
 static bool turbo_mode = true;
@@ -80,13 +81,14 @@ MODULE_PARM_DESC(turbo_mode, "Enable mul
 static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
 					    u32 *data, int in_pm)
 {
+	struct smsc95xx_priv *pdata = dev->driver_priv;
 	u32 buf;
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
 
 	BUG_ON(!dev);
 
-	if (!in_pm)
+	if (current != pdata->pm_task)
 		fn = usbnet_read_cmd;
 	else
 		fn = usbnet_read_cmd_nopm;
@@ -110,13 +112,14 @@ static int __must_check __smsc95xx_read_
 static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index,
 					     u32 data, int in_pm)
 {
+	struct smsc95xx_priv *pdata = dev->driver_priv;
 	u32 buf;
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
 
 	BUG_ON(!dev);
 
-	if (!in_pm)
+	if (current != pdata->pm_task)
 		fn = usbnet_write_cmd;
 	else
 		fn = usbnet_write_cmd_nopm;
@@ -1490,9 +1493,12 @@ static int smsc95xx_suspend(struct usb_i
 	u32 val, link_up;
 	int ret;
 
+	pdata->pm_task = current;
+
 	ret = usbnet_suspend(intf, message);
 	if (ret < 0) {
 		netdev_warn(dev->net, "usbnet_suspend error\n");
+		pdata->pm_task = NULL;
 		return ret;
 	}
 
@@ -1732,6 +1738,7 @@ done:
 	if (ret && PMSG_IS_AUTO(message))
 		usbnet_resume(intf);
 
+	pdata->pm_task = NULL;
 	return ret;
 }
 
@@ -1752,29 +1759,31 @@ static int smsc95xx_resume(struct usb_in
 	/* do this first to ensure it's cleared even in error case */
 	pdata->suspend_flags = 0;
 
+	pdata->pm_task = current;
+
 	if (suspend_flags & SUSPEND_ALLMODES) {
 		/* clear wake-up sources */
 		ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
 		if (ret < 0)
-			return ret;
+			goto done;
 
 		val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
 
 		ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
 		if (ret < 0)
-			return ret;
+			goto done;
 
 		/* clear wake-up status */
 		ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
 		if (ret < 0)
-			return ret;
+			goto done;
 
 		val &= ~PM_CTL_WOL_EN_;
 		val |= PM_CTL_WUPS_;
 
 		ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
 		if (ret < 0)
-			return ret;
+			goto done;
 	}
 
 	phy_init_hw(pdata->phydev);
@@ -1783,15 +1792,20 @@ static int smsc95xx_resume(struct usb_in
 	if (ret < 0)
 		netdev_warn(dev->net, "usbnet_resume error\n");
 
+done:
+	pdata->pm_task = NULL;
 	return ret;
 }
 
 static int smsc95xx_reset_resume(struct usb_interface *intf)
 {
 	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc95xx_priv *pdata = dev->driver_priv;
 	int ret;
 
+	pdata->pm_task = current;
 	ret = smsc95xx_reset(dev);
+	pdata->pm_task = NULL;
 	if (ret < 0)
 		return ret;
 
author maintainer
#58 lore raw

PATCH 60/1157 fix short copy handling in copy_mc_pipe_to_iter()

In reply to Greg Kroah-Hartman

From: Al Viro <[email protected]>

commit c3497fd009ef2c59eea60d21c3ac22de3585ed7d upstream.

Unlike other copying operations on ITER_PIPE, copy_mc_to_iter() can result in a short copy. In that case we need to trim the unused buffers, as well as the length of partially filled one - it's not enough to set ->head, ->iov_offset and ->count to reflect how much had we copied. Not hard to fix, fortunately...

I'd put a helper (pipe_discard_from(pipe, head)) into pipe_fs_i.h, rather than iov_iter.c - it has nothing to do with iov_iter and having it will allow us to avoid an ugly kludge in fs/splice.c. We could put it into lib/iov_iter.c for now and move it later, but I don't see the point going that way...

Fixes ca146f6f091e "lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()"
---
 include/linux/pipe_fs_i.h |    9 +++++++++
 lib/iov_iter.c            |   15 +++++++++++----
 2 files changed, 20 insertions(+), 4 deletions(-)
include/linux/pipe_fs_i.h +9 -0
@@ -229,6 +229,15 @@ static inline bool pipe_buf_try_steal(st
 	return buf->ops->try_steal(pipe, buf);
 }
 
+static inline void pipe_discard_from(struct pipe_inode_info *pipe,
+		unsigned int old_head)
+{
+	unsigned int mask = pipe->ring_size - 1;
+
+	while (pipe->head > old_head)
+		pipe_buf_release(pipe, &pipe->bufs[--pipe->head & mask]);
+}
+
 /* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
    memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
 #define PIPE_SIZE		PAGE_SIZE
lib/iov_iter.c +11 -4
@@ -689,6 +689,7 @@ static size_t copy_mc_pipe_to_iter(const
 	struct pipe_inode_info *pipe = i->pipe;
 	unsigned int p_mask = pipe->ring_size - 1;
 	unsigned int i_head;
+	unsigned int valid = pipe->head;
 	size_t n, off, xfer = 0;
 
 	if (!sanity(i))
@@ -702,11 +703,17 @@ static size_t copy_mc_pipe_to_iter(const
 		rem = copy_mc_to_kernel(p + off, addr + xfer, chunk);
 		chunk -= rem;
 		kunmap_local(p);
-		i->head = i_head;
-		i->iov_offset = off + chunk;
-		xfer += chunk;
-		if (rem)
+		if (chunk) {
+			i->head = i_head;
+			i->iov_offset = off + chunk;
+			xfer += chunk;
+			valid = i_head + 1;
+		}
+		if (rem) {
+			pipe->bufs[i_head & p_mask].len -= rem;
+			pipe_discard_from(pipe, valid);
 			break;
+		}
 		n -= chunk;
 		off = 0;
 		i_head++;
author maintainer
#59 lore raw

PATCH 61/1157 crypto: ccp - Use kzalloc for sev ioctl interfaces to prevent kernel memory leak

In reply to Greg Kroah-Hartman

From: John Allen <[email protected]>

commit 13dc15a3f5fd7f884e4bfa8c011a0ae868df12ae upstream.

For some sev ioctl interfaces, input may be passed that is less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the buffer, the sev ioctl interfaces with the issue may return uninitialized slab memory.

Currently, all of the ioctl interfaces in the ccp driver are safe, but to prevent future problems, change all ioctl interfaces that allocate memory with kmalloc to use kzalloc and memset the data buffer to zero in sev_ioctl_do_platform_status.

Fixes 38103671aad3 ("crypto: ccp: Use the stack and common buffer for status commands")
Fixes e799035609e15 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command")
Fixes 76a2b524a4b1d ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Fixes d6112ea0cb344 ("crypto: ccp - introduce SEV_GET_ID2 command")
---
 drivers/crypto/ccp/sev-dev.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/crypto/ccp/sev-dev.c +6 -4
@@ -577,6 +577,8 @@ static int sev_ioctl_do_platform_status(
 	struct sev_user_data_status data;
 	int ret;
 
+	memset(&data, 0, sizeof(data));
+
 	ret = __sev_do_cmd_locked(SEV_CMD_PLATFORM_STATUS, &data, &argp->error);
 	if (ret)
 		return ret;
@@ -630,7 +632,7 @@ static int sev_ioctl_do_pek_csr(struct s
 	if (input.length > SEV_FW_BLOB_MAX_SIZE)
 		return -EFAULT;
 
-	blob = kmalloc(input.length, GFP_KERNEL);
+	blob = kzalloc(input.length, GFP_KERNEL);
 	if (!blob)
 		return -ENOMEM;
 
@@ -854,7 +856,7 @@ static int sev_ioctl_do_get_id2(struct s
 	input_address = (void __user *)input.address;
 
 	if (input.address && input.length) {
-		id_blob = kmalloc(input.length, GFP_KERNEL);
+		id_blob = kzalloc(input.length, GFP_KERNEL);
 		if (!id_blob)
 			return -ENOMEM;
 
@@ -973,14 +975,14 @@ static int sev_ioctl_do_pdh_export(struc
 	if (input.cert_chain_len > SEV_FW_BLOB_MAX_SIZE)
 		return -EFAULT;
 
-	pdh_blob = kmalloc(input.pdh_cert_len, GFP_KERNEL);
+	pdh_blob = kzalloc(input.pdh_cert_len, GFP_KERNEL);
 	if (!pdh_blob)
 		return -ENOMEM;
 
 	data.pdh_cert_address = __psp_pa(pdh_blob);
 	data.pdh_cert_len = input.pdh_cert_len;
 
-	cert_blob = kmalloc(input.cert_chain_len, GFP_KERNEL);
+	cert_blob = kzalloc(input.cert_chain_len, GFP_KERNEL);
 	if (!cert_blob) {
 		ret = -ENOMEM;
 		goto e_free_pdh;
author maintainer
#60 lore raw

PATCH 62/1157 ovl: drop WARN_ON() dentry is NULL in ovl_encode_fh()

In reply to Greg Kroah-Hartman

From: Jiachen Zhang <[email protected]>

commit dd524b7f317de8d31d638cbfdc7be4cf9b770e42 upstream.

Some code paths cannot guarantee the inode have any dentry alias. So WARN_ON() all !dentry may flood the kernel logs.

For example, when an overlayfs inode is watched by inotifywait (1), and someone is trying to read the /proc/$(pidof inotifywait)/fdinfo/INOTIFY_FD, at that time if the dentry has been reclaimed by kernel (such as echo 2 > /proc/sys/vm/drop_caches), there will be a WARN_ON(). The printed call stack would be like:

    ? show_mark_fhandle+0xf0/0xf0
    show_mark_fhandle+0x4a/0xf0
    ? show_mark_fhandle+0xf0/0xf0
    ? seq_vprintf+0x30/0x50
    ? seq_printf+0x53/0x70
    ? show_mark_fhandle+0xf0/0xf0
    inotify_fdinfo+0x70/0x90
    show_fdinfo.isra.4+0x53/0x70
    seq_show+0x130/0x170
    seq_read+0x153/0x440
    vfs_read+0x94/0x150
    ksys_read+0x5f/0xe0
    do_syscall_64+0x59/0x1e0
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

So let's drop WARN_ON() to avoid kernel log flooding.

Fixes 8ed5eec9d6c4 ("ovl: encode pure upper file handles")
Cc <[email protected]> # v4.16
---
 fs/overlayfs/export.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/overlayfs/export.c +1 -1
@@ -259,7 +259,7 @@ static int ovl_encode_fh(struct inode *i
 		return FILEID_INVALID;
 
 	dentry = d_find_any_alias(inode);
-	if (WARN_ON(!dentry))
+	if (!dentry)
 		return FILEID_INVALID;
 
 	bytes = ovl_dentry_to_fid(ofs, dentry, fid, buflen);
author maintainer
#61 lore raw

PATCH 63/1157 parisc: Fix device names in /proc/iomem

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit cab56b51ec0e69128909cef4650e1907248d821b upstream.

Fix the output of /proc/iomem to show the real hardware device name including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]". Up to now only the pa_pathname ("[8:16.0]") was shown.

---
 arch/parisc/kernel/drivers.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
arch/parisc/kernel/drivers.c +4 -5
@@ -520,7 +520,6 @@ alloc_pa_dev(unsigned long hpa, struct h
 	dev->id.hversion_rev = iodc_data[1] & 0x0f;
 	dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
 			(iodc_data[5] << 8) | iodc_data[6];
-	dev->hpa.name = parisc_pathname(dev);
 	dev->hpa.start = hpa;
 	/* This is awkward.  The STI spec says that gfx devices may occupy
 	 * 32MB or 64MB.  Unfortunately, we don't know how to tell whether
@@ -534,10 +533,10 @@ alloc_pa_dev(unsigned long hpa, struct h
 		dev->hpa.end = hpa + 0xfff;
 	}
 	dev->hpa.flags = IORESOURCE_MEM;
-	name = parisc_hardware_description(&dev->id);
-	if (name) {
-		strlcpy(dev->name, name, sizeof(dev->name));
-	}
+	dev->hpa.name = dev->name;
+	name = parisc_hardware_description(&dev->id) ? : "unknown";
+	snprintf(dev->name, sizeof(dev->name), "%s [%s]",
+		name, parisc_pathname(dev));
 
 	/* Silently fail things like mouse ports which are subsumed within
 	 * the keyboard controller
author maintainer
#62 lore raw

PATCH 64/1157 parisc: Drop pa_swapper_pg_lock spinlock

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit 3fbc9a7de0564c55d8a9584c9cd2c9dfe6bd6d43 upstream.

This spinlock was dropped with commit b7795074a046 ("parisc: Optimize per-pagetable spinlocks") in kernel v5.12.

Remove it to silence a sparse warning.

---
 arch/parisc/kernel/cache.c |    3 ---
 1 file changed, 3 deletions(-)
arch/parisc/kernel/cache.c +0 -3
@@ -50,9 +50,6 @@ void flush_instruction_cache_local(void)
  */
 DEFINE_SPINLOCK(pa_tlb_flush_lock);
 
-/* Swapper page setup lock. */
-DEFINE_SPINLOCK(pa_swapper_pg_lock);
-
 #if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
 int pa_serialize_tlb_flushes __ro_after_init;
 #endif
author maintainer
#63 lore raw

PATCH 65/1157 parisc: Check the return value of ioremap() in lba_driver_probe()

In reply to Greg Kroah-Hartman

From: William Dean <[email protected]>

commit cf59f34d7f978d14d6520fd80a78a5ad5cb8abf8 upstream.

The function ioremap() in lba_driver_probe() can fail, so its return value should be checked.

Fixes 4bdc0d676a643 ("remove ioremap_nocache and devm_ioremap_nocache")
Cc <[email protected]> # v5.6+
---
 drivers/parisc/lba_pci.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/parisc/lba_pci.c +5 -1
@@ -1476,9 +1476,13 @@ lba_driver_probe(struct parisc_device *d
 	u32 func_class;
 	void *tmp_obj;
 	char *version;
-	void __iomem *addr = ioremap(dev->hpa.start, 4096);
+	void __iomem *addr;
 	int max;
 
+	addr = ioremap(dev->hpa.start, 4096);
+	if (addr == NULL)
+		return -ENOMEM;
+
 	/* Read HW Rev First */
 	func_class = READ_REG32(addr + LBA_FCLASS);
 
author maintainer
#64 lore raw

PATCH 66/1157 parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

commit 6431e92fc827bdd2d28f79150d90415ba9ce0d21 upstream.

For all syscalls in 32-bit compat mode on 64-bit kernels the upper 32-bits of the 64-bit registers are zeroed out, so a negative 32-bit signed value will show up as positive 64-bit signed value.

This behaviour breaks the io_pgetevents_time64() syscall which expects signed 64-bit values for the "min_nr" and "nr" parameters. Fix this by switching to the compat_sys_io_pgetevents_time64() syscall, which uses "compat_long_t" types for those parameters.

---
 arch/parisc/kernel/syscalls/syscall.tbl |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/parisc/kernel/syscalls/syscall.tbl +1 -1
@@ -413,7 +413,7 @@
 412	32	utimensat_time64		sys_utimensat			sys_utimensat
 413	32	pselect6_time64			sys_pselect6			compat_sys_pselect6_time64
 414	32	ppoll_time64			sys_ppoll			compat_sys_ppoll_time64
-416	32	io_pgetevents_time64		sys_io_pgetevents		sys_io_pgetevents
+416	32	io_pgetevents_time64		sys_io_pgetevents		compat_sys_io_pgetevents_time64
 417	32	recvmmsg_time64			sys_recvmmsg			compat_sys_recvmmsg_time64
 418	32	mq_timedsend_time64		sys_mq_timedsend		sys_mq_timedsend
 419	32	mq_timedreceive_time64		sys_mq_timedreceive		sys_mq_timedreceive
author maintainer
#65 lore raw

PATCH 67/1157 riscv:uprobe fix SR_SPIE set/clear handling

In reply to Greg Kroah-Hartman

From: Yipeng Zou <[email protected]>

commit 3dbe5829408bc1586f75b4667ef60e5aab0209c7 upstream.

In riscv the process of uprobe going to clear spie before exec the origin insn,and set spie after that.But When access the page which origin insn has been placed a page fault may happen and irq was disabled in arch_uprobe_pre_xol function,It cause a WARN as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol. We can just remove it.

[   31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[   31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[   31.684929] preempt_count: 0, expected: 0
[   31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[   31.686542] Hardware name: riscv-virtio,qemu (DT)
[   31.686797] Call Trace:
[   31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[   31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[   31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[   31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[   31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[   31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[   31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[   31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[   31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc
---
 arch/riscv/kernel/probes/uprobes.c |    6 ------
 1 file changed, 6 deletions(-)
arch/riscv/kernel/probes/uprobes.c +0 -6
@@ -59,8 +59,6 @@ int arch_uprobe_pre_xol(struct arch_upro
 
 	instruction_pointer_set(regs, utask->xol_vaddr);
 
-	regs->status &= ~SR_SPIE;
-
 	return 0;
 }
 
@@ -72,8 +70,6 @@ int arch_uprobe_post_xol(struct arch_upr
 
 	instruction_pointer_set(regs, utask->vaddr + auprobe->insn_size);
 
-	regs->status |= SR_SPIE;
-
 	return 0;
 }
 
@@ -111,8 +107,6 @@ void arch_uprobe_abort_xol(struct arch_u
 	 * address.
 	 */
 	instruction_pointer_set(regs, utask->vaddr);
-
-	regs->status &= ~SR_SPIE;
 }
 
 bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
author maintainer
#66 lore raw

PATCH 68/1157 riscv: lib: uaccess: fix CSR_STATUS SR_SUM bit

In reply to Greg Kroah-Hartman

From: Chen Lifu <[email protected]>

commit c08b4848f596fd95543197463b5162bd7bab2442 upstream.

Since commit 5d8544e2d007 ("RISC-V: Generic library routines and assembly") and commit ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code"), if __clear_user and __copy_user return from an fixup branch, CSR_STATUS SR_SUM bit will be set, it is a vulnerability, so that S-mode memory accesses to pages that are accessible by U-mode will success. Disable S-mode access to U-mode memory should clear SR_SUM bit.

Fixes 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Fixes ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code")
---
 arch/riscv/lib/uaccess.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/riscv/lib/uaccess.S +2 -2
@@ -175,7 +175,7 @@ ENTRY(__asm_copy_from_user)
 	/* Exception fixup code */
 10:
 	/* Disable access to user memory */
-	csrs CSR_STATUS, t6
+	csrc CSR_STATUS, t6
 	mv a0, t5
 	ret
 ENDPROC(__asm_copy_to_user)
@@ -227,7 +227,7 @@ ENTRY(__clear_user)
 	/* Exception fixup code */
 11:
 	/* Disable access to user memory */
-	csrs CSR_STATUS, t6
+	csrc CSR_STATUS, t6
 	mv a0, a1
 	ret
 ENDPROC(__clear_user)
author maintainer
#67 lore raw

PATCH 69/1157 dt-bindings: riscv: fix SiFive l2-caches cache-sets

In reply to Greg Kroah-Hartman

From: Conor Dooley <[email protected]>

commit b60cf8e59e61133b6c9514ff8d8c8d7049d040ef upstream.

Fix device tree schema validation error messages for the SiFive
Unmatched: ' cache-sets:0:0: 1024 was expected'.

The existing bindings allow for just 1024 cache-sets but the fu740 on Unmatched the has 2048 cache-sets. The ISA itself permits any arbitrary power of two, however this is not supported by dt-schema. The RTL for the IP, to which the number of cache-sets is a tunable parameter, has been released publicly so speculatively adding a small number of "reasonable" values seems unwise also.

Instead, as the binding only supports two distinct controllers: add 2048 and explicitly lock it to the fu740's l2 cache while limiting 1024 to the l2 cache on the fu540.

Fixes af951c3a113b ("dt-bindings: riscv: Update l2 cache DT documentation to add support for SiFive FU740")
---
 Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +5 -1
@@ -46,7 +46,7 @@ properties:
     const: 2
 
   cache-sets:
-    const: 1024
+    enum: [1024, 2048]
 
   cache-size:
     const: 2097152
@@ -84,6 +84,8 @@ then:
       description: |
         Must contain entries for DirError, DataError and DataFail signals.
       maxItems: 3
+    cache-sets:
+      const: 1024
 
 else:
   properties:
@@ -91,6 +93,8 @@ else:
       description: |
         Must contain entries for DirError, DataError, DataFail, DirFail signals.
       minItems: 4
+    cache-sets:
+      const: 2048
 
 additionalProperties: false
 
author maintainer
#68 lore raw

PATCH 70/1157 riscv: dts: starfive: correct number of external interrupts

In reply to Greg Kroah-Hartman

From: Mark Kettenis <[email protected]>

commit a208acf0eac857dc8cdaddd63a4e18ed03f91786 upstream.

The PLIC integrated on the Vic_U7_Core integrated on the StarFive JH7100 SoC actually supports 133 external interrupts. 127 of these are exposed to the outside world; the remainder are used by other devices that are part of the core-complex such as the L2 cache controller. But all 133 interrupts are external interrupts as far as the PLIC is concerned. Fix the property so that the driver can manage these additional interrupts, which is important since the interrupts for the L2 cache controller are enabled by default.

Fixes ec85362fb121 ("RISC-V: Add initial StarFive JH7100 device tree")
---
 arch/riscv/boot/dts/starfive/jh7100.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/boot/dts/starfive/jh7100.dtsi +1 -1
@@ -118,7 +118,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			riscv,ndev = <127>;
+			riscv,ndev = <133>;
 		};
 
 		clkgen: clock-controller@11800000 {
author maintainer
#69 lore raw

PATCH 71/1157 RISC-V: cpu_ops_spinwait.c should include head.h

In reply to Greg Kroah-Hartman

From: Ben Dooks <[email protected]>

commit e4aa991c05aedc3ead92d1352af86db74090dc3c upstream.

Running sparse shows cpu_ops_spinwait.c is missing two definitions found in head.h, so include it to stop the following warnings:

arch/riscv/kernel/cpu_ops_spinwait.c:15:6: warning: symbol '__cpu_spinwait_stack_pointer' was not declared. Should it be static? arch/riscv/kernel/cpu_ops_spinwait.c:16:6: warning: symbol '__cpu_spinwait_task_pointer' was not declared. Should it be static?

Fixes c78f94f35cf6 ("RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method")
---
 arch/riscv/kernel/cpu_ops_spinwait.c |    2 ++
 1 file changed, 2 insertions(+)
arch/riscv/kernel/cpu_ops_spinwait.c +2 -0
@@ -11,6 +11,8 @@
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
+#include "head.h"
+
 const struct cpu_operations cpu_ops_spinwait;
 void *__cpu_spinwait_stack_pointer[NR_CPUS] __section(".data");
 void *__cpu_spinwait_task_pointer[NR_CPUS] __section(".data");
author maintainer
#70 lore raw

PATCH 72/1157 RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>

In reply to Greg Kroah-Hartman

From: Ben Dooks <[email protected]>

commit da6d2128e56a50a0d497c8e41ca1d33d88bcc0aa upstream.

The cpu_ops_spinwait is used in a couple of places in arch/riscv and is causing a sparse warning due to no declaration. Add this to <asm/cpu_ops.h> with the others to fix the following:

arch/riscv/kernel/cpu_ops_spinwait.c:16:29: warning: symbol 'cpu_ops_spinwait' was not declared. Should it be static?

[Palmer: Drop the extern from cpu_ops.c]
Fixes 2ffc48fc7071 ("RISC-V: Move spinwait booting method to its own config")
---
 arch/riscv/include/asm/cpu_ops.h |    1 +
 arch/riscv/kernel/cpu_ops.c      |    4 +---
 2 files changed, 2 insertions(+), 3 deletions(-)
arch/riscv/include/asm/cpu_ops.h +1 -0
@@ -38,6 +38,7 @@ struct cpu_operations {
 #endif
 };
 
+extern const struct cpu_operations cpu_ops_spinwait;
 extern const struct cpu_operations *cpu_ops[NR_CPUS];
 void __init cpu_set_ops(int cpu);
 
arch/riscv/kernel/cpu_ops.c +1 -3
@@ -15,9 +15,7 @@
 const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
 
 extern const struct cpu_operations cpu_ops_sbi;
-#ifdef CONFIG_RISCV_BOOT_SPINWAIT
-extern const struct cpu_operations cpu_ops_spinwait;
-#else
+#ifndef CONFIG_RISCV_BOOT_SPINWAIT
 const struct cpu_operations cpu_ops_spinwait = {
 	.name		= "",
 	.cpu_prepare	= NULL,
author maintainer
#71 lore raw

PATCH 73/1157 RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context

In reply to Greg Kroah-Hartman

From: Xianting Tian <[email protected]>

commit 357628e68f5c08ad578a718dc62a0031e06dbe91 upstream.

Use __smp_processor_id() to avoid check the preemption context when CONFIG_DEBUG_PREEMPT enabled, as we will enter crash kernel and no return.

Without the patch,

[  103.781044] sysrq: Trigger a crash
[  103.784625] Kernel panic - not syncing: sysrq triggered crash
[  103.837634] CPU1: off
[  103.889668] CPU2: off
[  103.933479] CPU3: off
[  103.939424] Starting crashdump kernel...
[  103.943442] BUG: using smp_processor_id() in preemptible [00000000] code: sh/346
[  103.950884] caller is debug_smp_processor_id+0x1c/0x26
[  103.956051] CPU: 0 PID: 346 Comm: sh Kdump: loaded Not tainted 5.10.113-00002-gce03f03bf4ec-dirty #149
[  103.965355] Call Trace:
[  103.967805] [<ffffffe00020372a>] walk_stackframe+0x0/0xa2
[  103.973206] [<ffffffe000bcf1f4>] show_stack+0x32/0x3e
[  103.978258] [<ffffffe000bd382a>] dump_stack_lvl+0x72/0x8e
[  103.983655] [<ffffffe000bd385a>] dump_stack+0x14/0x1c
[  103.988705] [<ffffffe000bdc8fe>] check_preemption_disabled+0x9e/0xaa
[  103.995057] [<ffffffe000bdc926>] debug_smp_processor_id+0x1c/0x26
[  104.001150] [<ffffffe000206c64>] machine_kexec+0x22/0xd0
[  104.006463] [<ffffffe000291a7e>] __crash_kexec+0x6a/0xa4
[  104.011774] [<ffffffe000bcf3fa>] panic+0xfc/0x2b0
[  104.016480] [<ffffffe000656ca4>] sysrq_reset_seq_param_set+0x0/0x70
[  104.022745] [<ffffffe000657310>] __handle_sysrq+0x8c/0x154
[  104.028229] [<ffffffe0006577e8>] write_sysrq_trigger+0x5a/0x6a
[  104.034061] [<ffffffe0003d90e0>] proc_reg_write+0x58/0xd4
[  104.039459] [<ffffffe00036cff4>] vfs_write+0x7e/0x254
[  104.044509] [<ffffffe00036d2f6>] ksys_write+0x58/0xbe
[  104.049558] [<ffffffe00036d36a>] sys_write+0xe/0x16
[  104.054434] [<ffffffe000201b9a>] ret_from_syscall+0x0/0x2
[  104.067863] Will call new kernel at ecc00000 from hart id 0
[  104.074939] FDT image at fc5ee000
[  104.079523] Bye...

With the patch we can got clear output,

[   67.740553] sysrq: Trigger a crash
[   67.744166] Kernel panic - not syncing: sysrq triggered crash
[   67.809123] CPU1: off
[   67.865210] CPU2: off
[   67.909075] CPU3: off
[   67.919123] Starting crashdump kernel...
[   67.924900] Will call new kernel at ecc00000 from hart id 0
[   67.932045] FDT image at fc5ee000
[   67.935560] Bye...
---
 arch/riscv/kernel/machine_kexec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/machine_kexec.c +1 -1
@@ -171,7 +171,7 @@ machine_kexec(struct kimage *image)
 	struct kimage_arch *internal = &image->arch;
 	unsigned long jump_addr = (unsigned long) image->start;
 	unsigned long first_ind_entry = (unsigned long) &image->head;
-	unsigned long this_cpu_id = smp_processor_id();
+	unsigned long this_cpu_id = __smp_processor_id();
 	unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
 	unsigned long fdt_addr = internal->fdt_addr;
 	void *control_code_buffer = page_address(image->control_code_page);
author maintainer
#72 lore raw

PATCH 74/1157 RISC-V: Fixup get incorrect user mode PC for kernel mode regs

In reply to Greg Kroah-Hartman

From: Xianting Tian <[email protected]>

commit 59c026c359c30f116fef6ee958e24d04983efbb0 upstream.

When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address.
Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack.

[   21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45
[   21.201979] Hardware name: riscv-virtio,qemu (DT)
[   21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90
[   21.202435]  gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c
[   21.202707]  t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0
[   21.202973]  s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001
[   21.203243]  a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00
[   21.203519]  a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8
[   21.203794]  s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98
[   21.204062]  s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468
[   21.204331]  s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700
[   21.204606]  s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00
[   21.204876]  t5 : ff60000001218000 t6 : ff200000103338b8
[   21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008

With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal,

crash> bt
PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh"
#0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba
#2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8
#4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8
#5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc
#6 [ff2000001039be40] vfs_write at ffffffff80152ba6
#7 [ff2000001039be80] ksys_write at ffffffff80152ece
#8 [ff2000001039bed0] sys_write at ffffffff80152f46

With the patch, we can get current kernel mode PC, the output as below,

[   17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42
[   17.607937] Hardware name: riscv-virtio,qemu (DT)
[   17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90
[   17.608441]  gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68
[   17.608741]  t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0
[   17.609025]  s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001
[   17.609320]  a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000
[   17.609601]  a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4
[   17.609894]  s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98
[   17.610186]  s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468
[   17.610469]  s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700
[   17.610755]  s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00
[   17.611041]  t5 : ff60000001218000 t6 : ff20000010333988
[   17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008

With the correct PC, the backtrace showed by crash tool as below,

crash> bt
PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh"
#0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6
#2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604
#4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8
#6 [ff20000010333e40] vfs_write at ffffffff80152bb2
#7 [ff20000010333e80] ksys_write at ffffffff80152eda
#8 [ff20000010333ed0] sys_write at ffffffff80152f52

---
 arch/riscv/kernel/crash_save_regs.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/kernel/crash_save_regs.S +1 -1
@@ -44,7 +44,7 @@ SYM_CODE_START(riscv_crash_save_regs)
 	REG_S t6,  PT_T6(a0)	/* x31 */
 
 	csrr t1, CSR_STATUS
-	csrr t2, CSR_EPC
+	auipc t2, 0x0
 	csrr t3, CSR_TVAL
 	csrr t4, CSR_CAUSE
 
author maintainer
#73 lore raw

PATCH 75/1157 RISC-V: Fixup schedule out issue in machine_crash_shutdown()

In reply to Greg Kroah-Hartman

From: Xianting Tian <[email protected]>

commit ad943893d5f1d0aeea892bf7b781cf8062b36d58 upstream.

Current task of executing crash kexec will be schedule out when panic is triggered by RCU Stall, as it needs to wait rcu completion. It lead to inability to enter the crash system.

The implementation of machine_crash_shutdown() is non-standard for RISC-V according to other Arch's implementation(eg, x86, arm64), we need to send IPI to stop secondary harts.

[224521.877268] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[224521.883471] rcu: 	0-...0: (3 GPs behind) idle=cfa/0/0x1 softirq=3968793/3968793 fqs=2495
[224521.891742] 	(detected by 2, t=5255 jiffies, g=60855593, q=328)
[224521.897754] Task dump for CPU 0:
[224521.901074] task:swapper/0     state:R  running task   stack:  0 pid:  0 ppid:   0 flags:0x00000008
[224521.911090] Call Trace:
[224521.913638] [<ffffffe000c432de>] __schedule+0x208/0x5ea
[224521.918957] Kernel panic - not syncing: RCU Stall
[224521.923773] bad: scheduling from the idle thread!
[224521.928571] CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Tainted: G   O  5.10.113-yocto-standard #1
[224521.938658] Call Trace:
[224521.941200] [<ffffffe00020395c>] walk_stackframe+0x0/0xaa
[224521.946689] [<ffffffe000c34f8e>] show_stack+0x32/0x3e
[224521.951830] [<ffffffe000c39020>] dump_stack_lvl+0x7e/0xa2
[224521.957317] [<ffffffe000c39058>] dump_stack+0x14/0x1c
[224521.962459] [<ffffffe000243884>] dequeue_task_idle+0x2c/0x40
[224521.968207] [<ffffffe000c434f4>] __schedule+0x41e/0x5ea
[224521.973520] [<ffffffe000c43826>] schedule+0x34/0xe4
[224521.978487] [<ffffffe000c46cae>] schedule_timeout+0xc6/0x170
[224521.984234] [<ffffffe000c4491e>] wait_for_completion+0x98/0xf2
[224521.990157] [<ffffffe00026d9e2>] __wait_rcu_gp+0x148/0x14a
[224521.995733] [<ffffffe0002761c4>] synchronize_rcu+0x5c/0x66
[224522.001307] [<ffffffe00026f1a6>] rcu_sync_enter+0x54/0xe6
[224522.006795] [<ffffffe00025a436>] percpu_down_write+0x32/0x11c
[224522.012629] [<ffffffe000c4266a>] _cpu_down+0x92/0x21a
[224522.017771] [<ffffffe000219a0a>] smp_shutdown_nonboot_cpus+0x90/0x118
[224522.024299] [<ffffffe00020701e>] machine_crash_shutdown+0x30/0x4a
[224522.030483] [<ffffffe00029a3f8>] __crash_kexec+0x62/0xa6
[224522.035884] [<ffffffe000c3515e>] panic+0xfa/0x2b6
[224522.040678] [<ffffffe0002772be>] rcu_sched_clock_irq+0xc26/0xcb8
[224522.046774] [<ffffffe00027fc7a>] update_process_times+0x62/0x8a
[224522.052785] [<ffffffe00028d522>] tick_sched_timer+0x9e/0x102
[224522.058533] [<ffffffe000280c3a>] __hrtimer_run_queues+0x16a/0x318
[224522.064716] [<ffffffe0002812ec>] hrtimer_interrupt+0xd4/0x228
[224522.070551] [<ffffffe0009a69b6>] riscv_timer_interrupt+0x3c/0x48
[224522.076646] [<ffffffe000268f8c>] handle_percpu_devid_irq+0xb0/0x24c
[224522.083004] [<ffffffe00026428e>] __handle_domain_irq+0xa8/0x122
[224522.089014] [<ffffffe00062f954>] riscv_intc_irq+0x38/0x60
[224522.094501] [<ffffffe000201bd4>] ret_from_exception+0x0/0xc
[224522.100161] [<ffffffe000c42146>] rcu_eqs_enter.constprop.0+0x8c/0xb8

With the patch, it can enter crash system when RCU Stall occur.

---
 arch/riscv/kernel/machine_kexec.c |   26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)
arch/riscv/kernel/machine_kexec.c +22 -4
@@ -138,19 +138,37 @@ void machine_shutdown(void)
 #endif
 }
 
+/* Override the weak function in kernel/panic.c */
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+
+	/*
+	 * This function can be called twice in panic path, but obviously
+	 * we execute this only once.
+	 */
+	if (cpus_stopped)
+		return;
+
+	smp_send_stop();
+	cpus_stopped = 1;
+}
+
 /*
  * machine_crash_shutdown - Prepare to kexec after a kernel crash
  *
  * This function is called by crash_kexec just before machine_kexec
- * below and its goal is similar to machine_shutdown, but in case of
- * a kernel crash. Since we don't handle such cases yet, this function
- * is empty.
+ * and its goal is to shutdown non-crashing cpus and save registers.
  */
 void
 machine_crash_shutdown(struct pt_regs *regs)
 {
+	local_irq_disable();
+
+	/* shutdown non-crashing cpus */
+	crash_smp_send_stop();
+
 	crash_save_cpu(regs, smp_processor_id());
-	machine_shutdown();
 	pr_info("Starting crashdump kernel...\n");
 }
 
author maintainer
#74 lore raw

PATCH 76/1157 RISC-V: Add modules to virtual kernel memory layout dump

In reply to Greg Kroah-Hartman

From: Xianting Tian <[email protected]>

commit f9293ad46d8ba9909187a37b7215324420ad4596 upstream.

Modules always live before the kernel, MODULES_END is fixed but MODULES_VADDR isn't fixed, it depends on the kernel size. Let's add it to virtual kernel memory layout dump.

As MODULES is only defined for CONFIG_64BIT, so we dump it when CONFIG_64BIT=y.

eg,
MODULES_VADDR - MODULES_END
0xffffffff01133000 - 0xffffffff80000000

---
 arch/riscv/mm/init.c |    4 ++++
 1 file changed, 4 insertions(+)
arch/riscv/mm/init.c +4 -0
@@ -135,6 +135,10 @@ static void __init print_vm_layout(void)
 		(unsigned long)VMEMMAP_END);
 	print_ml("vmalloc", (unsigned long)VMALLOC_START,
 		(unsigned long)VMALLOC_END);
+#ifdef CONFIG_64BIT
+	print_ml("modules", (unsigned long)MODULES_VADDR,
+		(unsigned long)MODULES_END);
+#endif
 	print_ml("lowmem", (unsigned long)PAGE_OFFSET,
 		(unsigned long)high_memory);
 	if (IS_ENABLED(CONFIG_64BIT)) {
author maintainer
#75 lore raw

PATCH 77/1157 RISC-V: Fix counter restart during overflow for RV32

In reply to Greg Kroah-Hartman

From: Atish Patra <[email protected]>

commit acc1b919f47926b089be21b8aaa29ec91fef0aa2 upstream.

Pass the upper half of the initial value of the counter correctly for RV32.

---
 drivers/perf/riscv_pmu_sbi.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/perf/riscv_pmu_sbi.c +5 -0
@@ -525,8 +525,13 @@ static inline void pmu_sbi_start_overflo
 			hwc = &event->hw;
 			max_period = riscv_pmu_ctr_get_width_mask(event);
 			init_val = local64_read(&hwc->prev_count) & max_period;
+#if defined(CONFIG_32BIT)
+			sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1,
+				  flag, init_val, init_val >> 32, 0);
+#else
 			sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1,
 				  flag, init_val, 0, 0);
+#endif
 		}
 		ctr_ovf_mask = ctr_ovf_mask >> 1;
 		idx++;
author maintainer
#76 lore raw

PATCH 78/1157 RISC-V: Fix SBI PMU calls for RV32

In reply to Greg Kroah-Hartman

From: Atish Patra <[email protected]>

commit 0209b5830bea42dd3ce33ab0397231e67ec3b751 upstream.

Some of the SBI PMU calls does not pass 64bit arguments correctly and not under RV32 compile time flags. Currently, this doesn't create any incorrect results as RV64 ignores any value in the additional register and qemu doesn't support raw events.

Fix those SBI calls in order to set correct values for RV32.

Fixes e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
---
 drivers/perf/riscv_pmu_sbi.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/perf/riscv_pmu_sbi.c +10 -0
@@ -274,8 +274,13 @@ static int pmu_sbi_ctr_get_idx(struct pe
 		cflags |= SBI_PMU_CFG_FLAG_SET_UINH;
 
 	/* retrieve the available counter index */
+#if defined(CONFIG_32BIT)
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
+			cflags, hwc->event_base, hwc->config, hwc->config >> 32);
+#else
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
 			cflags, hwc->event_base, hwc->config, 0);
+#endif
 	if (ret.error) {
 		pr_debug("Not able to find a counter for event %lx config %llx\n",
 			hwc->event_base, hwc->config);
@@ -417,8 +422,13 @@ static void pmu_sbi_ctr_start(struct per
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE;
 
+#if defined(CONFIG_32BIT)
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
 			1, flag, ival, ival >> 32, 0);
+#else
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
+			1, flag, ival, 0, 0);
+#endif
 	if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
 		pr_err("Starting counter idx %d failed with error %d\n",
 			hwc->idx, sbi_err_map_linux_errno(ret.error));
author maintainer
#77 lore raw

PATCH 79/1157 RISC-V: Update user page mapping only once during start

In reply to Greg Kroah-Hartman

From: Atish Patra <[email protected]>

commit 133a6d1fe7d7ad8393af025c4dde379c0616661f upstream.

Currently, riscv_pmu_event_set_period updates the userpage mapping. However, the caller of riscv_pmu_event_set_period should update the userpage mapping because the counter can not be updated/started from set_period function in counter overflow path.

Invoke the perf_event_update_userpage at the caller so that it doesn't get invoked twice during counter start path.

---
 drivers/perf/riscv_pmu.c     |    1 -
 drivers/perf/riscv_pmu_sbi.c |    1 +
 2 files changed, 1 insertion(+), 1 deletion(-)
drivers/perf/riscv_pmu.c +0 -1
@@ -170,7 +170,6 @@ int riscv_pmu_event_set_period(struct pe
 		left = (max_period >> 1);
 
 	local64_set(&hwc->prev_count, (u64)-left);
-	perf_event_update_userpage(event);
 
 	return overflow;
 }
drivers/perf/riscv_pmu_sbi.c +1 -0
@@ -542,6 +542,7 @@ static inline void pmu_sbi_start_overflo
 			sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1,
 				  flag, init_val, 0, 0);
 #endif
+			perf_event_update_userpage(event);
 		}
 		ctr_ovf_mask = ctr_ovf_mask >> 1;
 		idx++;
author maintainer
#78 lore raw

PATCH 80/1157 wireguard: selftests: set CONFIG_NONPORTABLE on riscv32

In reply to Greg Kroah-Hartman

From: Jason A. Donenfeld <[email protected]>

commit 9019b4f6d9bd88524ecd95420cf9cd4aaed7a125 upstream.

When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various configs were updated, but the wireguard config was forgotten about. This leads to unbootable test kernels, causing CI fails. Add CONFIG_NONPORTABLE=y to the wireguard test suite configuration for riscv32.

---
 tools/testing/selftests/wireguard/qemu/arch/riscv32.config |    1 +
 1 file changed, 1 insertion(+)
tools/testing/selftests/wireguard/qemu/arch/riscv32.config +1 -0
@@ -1,3 +1,4 @@
+CONFIG_NONPORTABLE=y
 CONFIG_ARCH_RV32I=y
 CONFIG_MMU=y
 CONFIG_FPU=y
author maintainer
#79 lore raw

PATCH 81/1157 rtc: rx8025: fix 12/24 hour mode detection on RX-8035

In reply to Greg Kroah-Hartman

From: Mathew McBride <[email protected]>

commit 71af91565052214ad86f288e0d8ffb165f790995 upstream.

The 12/24hr flag in the RX-8035 can be found in the hour register, instead of the CTRL1 on the RX-8025. This was overlooked when support for the RX-8035 was added, and was causing read errors when the hour register 'overflowed'.

To deal with the relevant register not always being visible in the relevant functions, determine the 12/24 mode at startup and store it in the driver state.

---
 drivers/rtc/rtc-rx8025.c |   22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
drivers/rtc/rtc-rx8025.c +18 -4
@@ -55,6 +55,8 @@
 #define RX8025_BIT_CTRL2_XST	BIT(5)
 #define RX8025_BIT_CTRL2_VDET	BIT(6)
 
+#define RX8035_BIT_HOUR_1224	BIT(7)
+
 /* Clock precision adjustment */
 #define RX8025_ADJ_RESOLUTION	3050 /* in ppb */
 #define RX8025_ADJ_DATA_MAX	62
@@ -78,6 +80,7 @@ struct rx8025_data {
 	struct rtc_device *rtc;
 	enum rx_model model;
 	u8 ctrl1;
+	int is_24;
 };
 
 static s32 rx8025_read_reg(const struct i2c_client *client, u8 number)
@@ -226,7 +229,7 @@ static int rx8025_get_time(struct device
 
 	dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f);
 	dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f);
 	else
 		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12
@@ -254,7 +257,7 @@ static int rx8025_set_time(struct device
 	 */
 	date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec);
 	date[RX8025_REG_MIN] = bin2bcd(dt->tm_min);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour);
 	else
 		date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0)
@@ -279,6 +282,7 @@ static int rx8025_init_client(struct i2c
 	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
 	u8 ctrl[2], ctrl2;
 	int need_clear = 0;
+	int hour_reg;
 	int err;
 
 	err = rx8025_read_regs(client, RX8025_REG_CTRL1, 2, ctrl);
@@ -303,6 +307,16 @@ static int rx8025_init_client(struct i2c
 
 		err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
 	}
+
+	if (rx8025->model == model_rx_8035) {
+		/* In RX-8035, 12/24 flag is in the hour register */
+		hour_reg = rx8025_read_reg(client, RX8025_REG_HOUR);
+		if (hour_reg < 0)
+			return hour_reg;
+		rx8025->is_24 = (hour_reg & RX8035_BIT_HOUR_1224);
+	} else {
+		rx8025->is_24 = (ctrl[1] & RX8025_BIT_CTRL1_1224);
+	}
 out:
 	return err;
 }
@@ -329,7 +343,7 @@ static int rx8025_read_alarm(struct devi
 	/* Hardware alarms precision is 1 minute! */
 	t->time.tm_sec = 0;
 	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		t->time.tm_hour = bcd2bin(ald[1] & 0x3f);
 	else
 		t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
@@ -350,7 +364,7 @@ static int rx8025_set_alarm(struct devic
 	int err;
 
 	ald[0] = bin2bcd(t->time.tm_min);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		ald[1] = bin2bcd(t->time.tm_hour);
 	else
 		ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0)
author maintainer
#80 lore raw

PATCH 82/1157 drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit 2939deac1fa220bc82b89235f146df1d9b52e876 upstream.

Use ww_acquire_fini() in the error code paths. Otherwise lockdep thinks that lock is held when lock's memory is freed after the drm_gem_lock_reservations() error. The ww_acquire_context needs to be annotated as "released", which fixes the noisy "WARNING: held lock freed!" splat of VirtIO-GPU driver with CONFIG_DEBUG_MUTEXES=y and enabled lockdep.

---
 drivers/gpu/drm/drm_gem.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_gem.c +2 -2
@@ -1226,7 +1226,7 @@ retry:
 		ret = dma_resv_lock_slow_interruptible(obj->resv,
 								 acquire_ctx);
 		if (ret) {
-			ww_acquire_done(acquire_ctx);
+			ww_acquire_fini(acquire_ctx);
 			return ret;
 		}
 	}
@@ -1251,7 +1251,7 @@ retry:
 				goto retry;
 			}
 
-			ww_acquire_done(acquire_ctx);
+			ww_acquire_fini(acquire_ctx);
 			return ret;
 		}
 	}
author maintainer
#81 lore raw

PATCH 83/1157 drm/shmem-helper: Add missing vunmap on error

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit df4aaf015775221dde8a51ee09edb919981f091e upstream.

The vmapping of dma-buf may succeed, but DRM SHMEM rejects the IOMEM mapping, and thus, drm_gem_shmem_vmap_locked() should unvmap the IOMEM before erroring out.

Fixes 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
---
 drivers/gpu/drm/drm_gem_shmem_helper.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/drm_gem_shmem_helper.c +1 -0
@@ -302,6 +302,7 @@ static int drm_gem_shmem_vmap_locked(str
 		ret = dma_buf_vmap(obj->import_attach->dmabuf, map);
 		if (!ret) {
 			if (WARN_ON(map->is_iomem)) {
+				dma_buf_vunmap(obj->import_attach->dmabuf, map);
 				ret = -EIO;
 				goto err_put_pages;
 			}
author maintainer
#82 lore raw

PATCH 84/1157 drm/vc4: hdmi: Disable audio if dmas property is present but empty

In reply to Greg Kroah-Hartman

From: Phil Elwell <[email protected]>

commit db2b927f8668adf3ac765e0921cd2720f5c04172 upstream.

The dmas property is used to hold the dmaengine channel used for audio output.

Older device trees were missing that property, so if it's not there we disable the audio output entirely.

However, some overlays have set an empty value to that property, mostly to workaround the fact that overlays cannot remove a property. Let's add a test for that case and if it's empty, let's disable it as well.

---
 drivers/gpu/drm/vc4/vc4_hdmi.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +3 -3
@@ -2035,12 +2035,12 @@ static int vc4_hdmi_audio_init(struct vc
 	struct device *dev = &vc4_hdmi->pdev->dev;
 	struct platform_device *codec_pdev;
 	const __be32 *addr;
-	int index;
+	int index, len;
 	int ret;
 
-	if (!of_find_property(dev->of_node, "dmas", NULL)) {
+	if (!of_find_property(dev->of_node, "dmas", &len) || !len) {
 		dev_warn(dev,
-			 "'dmas' DT property is missing, no HDMI audio\n");
+			 "'dmas' DT property is missing or empty, no HDMI audio\n");
 		return 0;
 	}
 
author maintainer
#83 lore raw

PATCH 85/1157 drm/ingenic: Use the highest possible DMA burst size

In reply to Greg Kroah-Hartman

From: Paul Cercueil <[email protected]>

commit f0dce5c4fdaf9e98dd2755ffb1363822854b6287 upstream.

Until now, when running at the maximum resolution of 1280x720 at 32bpp on the JZ4770 SoC the output was garbled, the X/Y position of the top-left corner of the framebuffer warping to a random position with the whole image being offset accordingly, every time a new frame was being submitted.

This problem can be eliminated by using a bigger burst size for the DMA.

Set in each soc_info structure the maximum burst size supported by the corresponding SoC, and use it in the driver.

Set the new value using regmap_update_bits() instead of regmap_set_bits(), since we do want to override the old value of the burst size. (Note that regmap_set_bits() wasn't really valid before for the same reason, but it never seemed to be a problem).

---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c |   10 ++++++++--
 drivers/gpu/drm/ingenic/ingenic-drm.h     |    3 +++
 2 files changed, 11 insertions(+), 2 deletions(-)
drivers/gpu/drm/ingenic/ingenic-drm-drv.c +8 -2
@@ -69,6 +69,7 @@ struct jz_soc_info {
 	bool map_noncoherent;
 	bool use_extended_hwdesc;
 	bool plane_f0_not_working;
+	u32 max_burst;
 	unsigned int max_width, max_height;
 	const u32 *formats_f0, *formats_f1;
 	unsigned int num_formats_f0, num_formats_f1;
@@ -318,8 +319,9 @@ static void ingenic_drm_crtc_update_timi
 		regmap_write(priv->map, JZ_REG_LCD_REV, mode->htotal << 16);
 	}
 
-	regmap_set_bits(priv->map, JZ_REG_LCD_CTRL,
-			JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16);
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+			   JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_MASK,
+			   JZ_LCD_CTRL_OFUP | priv->soc_info->max_burst);
 
 	/*
 	 * IPU restart - specify how much time the LCDC will wait before
@@ -1518,6 +1520,7 @@ static const struct jz_soc_info jz4740_s
 	.map_noncoherent = false,
 	.max_width = 800,
 	.max_height = 600,
+	.max_burst = JZ_LCD_CTRL_BURST_16,
 	.formats_f1 = jz4740_formats,
 	.num_formats_f1 = ARRAY_SIZE(jz4740_formats),
 	/* JZ4740 has only one plane */
@@ -1529,6 +1532,7 @@ static const struct jz_soc_info jz4725b_
 	.map_noncoherent = false,
 	.max_width = 800,
 	.max_height = 600,
+	.max_burst = JZ_LCD_CTRL_BURST_16,
 	.formats_f1 = jz4725b_formats_f1,
 	.num_formats_f1 = ARRAY_SIZE(jz4725b_formats_f1),
 	.formats_f0 = jz4725b_formats_f0,
@@ -1541,6 +1545,7 @@ static const struct jz_soc_info jz4770_s
 	.map_noncoherent = true,
 	.max_width = 1280,
 	.max_height = 720,
+	.max_burst = JZ_LCD_CTRL_BURST_64,
 	.formats_f1 = jz4770_formats_f1,
 	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
 	.formats_f0 = jz4770_formats_f0,
@@ -1555,6 +1560,7 @@ static const struct jz_soc_info jz4780_s
 	.plane_f0_not_working = true,	/* REVISIT */
 	.max_width = 4096,
 	.max_height = 2048,
+	.max_burst = JZ_LCD_CTRL_BURST_64,
 	.formats_f1 = jz4770_formats_f1,
 	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
 	.formats_f0 = jz4770_formats_f0,
drivers/gpu/drm/ingenic/ingenic-drm.h +3 -0
@@ -106,6 +106,9 @@
 #define JZ_LCD_CTRL_BURST_4			(0x0 << 28)
 #define JZ_LCD_CTRL_BURST_8			(0x1 << 28)
 #define JZ_LCD_CTRL_BURST_16			(0x2 << 28)
+#define JZ_LCD_CTRL_BURST_32			(0x3 << 28)
+#define JZ_LCD_CTRL_BURST_64			(0x4 << 28)
+#define JZ_LCD_CTRL_BURST_MASK			(0x7 << 28)
 #define JZ_LCD_CTRL_RGB555			BIT(27)
 #define JZ_LCD_CTRL_OFUP			BIT(26)
 #define JZ_LCD_CTRL_FRC_GRAYSCALE_16		(0x0 << 24)
author maintainer
#84 lore raw

PATCH 86/1157 drm/fb-helper: Fix out-of-bounds access

In reply to Greg Kroah-Hartman

From: Thomas Zimmermann <[email protected]>

commit ae25885bdf59fde40726863c57fd20e4a0642183 upstream.

Clip memory range to screen-buffer size to avoid out-of-bounds access in fbdev deferred I/O's damage handling.

Fbdev's deferred I/O can only track pages. From the range of pages, the damage handler computes the clipping rectangle for the display update. If the fbdev screen buffer ends near the beginning of a page, that page could contain more scanlines. The damage handler would then track these non-existing scanlines as dirty and provoke an out-of-bounds access during the screen update. Hence, clip the maximum memory range to the size of the screen buffer.

While at it, rename the variables min/max to min_off/max_off in drm_fb_helper_deferred_io(). This avoids confusion with the macros of the same name.

Fixes 67b723f5b742 ("drm/fb-helper: Calculate damaged area in separate helper")
Cc Thomas Zimmermann <[email protected]>
Cc Javier Martinez Canillas <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc <[email protected]> # v5.18+
---
 drivers/gpu/drm/drm_fb_helper.c |   27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)
drivers/gpu/drm/drm_fb_helper.c +19 -8
@@ -680,7 +680,11 @@ static void drm_fb_helper_damage(struct
 	schedule_work(&helper->damage_work);
 }
 
-/* Convert memory region into area of scanlines and pixels per scanline */
+/*
+ * Convert memory region into area of scanlines and pixels per
+ * scanline. The parameters off and len must not reach beyond
+ * the end of the framebuffer.
+ */
 static void drm_fb_helper_memory_range_to_clip(struct fb_info *info, off_t off, size_t len,
 					       struct drm_rect *clip)
 {
@@ -715,22 +719,29 @@ static void drm_fb_helper_memory_range_t
  */
 void drm_fb_helper_deferred_io(struct fb_info *info, struct list_head *pagereflist)
 {
-	unsigned long start, end, min, max;
+	unsigned long start, end, min_off, max_off;
 	struct fb_deferred_io_pageref *pageref;
 	struct drm_rect damage_area;
 
-	min = ULONG_MAX;
-	max = 0;
+	min_off = ULONG_MAX;
+	max_off = 0;
 	list_for_each_entry(pageref, pagereflist, list) {
 		start = pageref->offset;
 		end = start + PAGE_SIZE;
-		min = min(min, start);
-		max = max(max, end);
+		min_off = min(min_off, start);
+		max_off = max(max_off, end);
 	}
-	if (min >= max)
+	if (min_off >= max_off)
 		return;
 
-	drm_fb_helper_memory_range_to_clip(info, min, max - min, &damage_area);
+	/*
+	 * As we can only track pages, we might reach beyond the end
+	 * of the screen and account for non-existing scanlines. Hence,
+	 * keep the covered memory area within the screen buffer.
+	 */
+	max_off = min(max_off, info->screen_size);
+
+	drm_fb_helper_memory_range_to_clip(info, min_off, max_off - min_off, &damage_area);
 	drm_fb_helper_damage(info, damage_area.x1, damage_area.y1,
 			     drm_rect_width(&damage_area),
 			     drm_rect_height(&damage_area));
author maintainer
#85 lore raw

PATCH 87/1157 drm/hyperv-drm: Include framebuffer and EDID headers

In reply to Greg Kroah-Hartman

From: Thomas Zimmermann <[email protected]>

commit 009a3a52791f31c57d755a73f6bc66fbdd8bd76c upstream.

Fix a number of compile errors by including the correct header files. Examples are shown below.

../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_blit_to_vram_rect':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:25:48: error: invalid use of undefined type 'struct drm_framebuffer'
25 | struct hyperv_drm_device *hv = to_hv(fb->dev);
| ^~

../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_connector_get_modes':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:59:17: error: implicit declaration of function 'drm_add_modes_noedid' [-Werror=implicit-function-declaration]
59 | count = drm_add_modes_noedid(connector,

      |                 ^~~~~~~~~~~~~~~~~~~~

../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:62:9: error: implicit declaration of function 'drm_set_preferred_mode'; did you mean 'drm_mm_reserve_node'? [-Werror=implicit-function-declaration]

   62 |         drm_set_preferred_mode(connector, hv->preferred_width,
      |         ^~~~~~~~~~~~~~~~~~~~~~
Fixes 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Fixes 720cf96d8fec ("drm: Drop drm_framebuffer.h from drm_crtc.h")
Fixes 255490f9150d ("drm: Drop drm_edid.h from drm_crtc.h")
Cc Deepak Rawat <[email protected]>
Cc Thomas Zimmermann <[email protected]>
Cc Maarten Lankhorst <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc <[email protected]> # v5.14+
---
 drivers/gpu/drm/hyperv/hyperv_drm_modeset.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/hyperv/hyperv_drm_modeset.c +2 -0
@@ -7,9 +7,11 @@
 
 #include <drm/drm_damage_helper.h>
 #include <drm/drm_drv.h>
+#include <drm/drm_edid.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_format_helper.h>
 #include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
 #include <drm/drm_gem_atomic_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_gem_shmem_helper.h>
author maintainer
#86 lore raw

PATCH 88/1157 drm/dp/mst: Read the extended DPCD capabilities during system resume

In reply to Greg Kroah-Hartman

From: Imre Deak <[email protected]>

commit 7a710a8bc909313951eb9252d8419924c771d7c2 upstream.

The WD22TB4 Thunderbolt dock at least will revert its DP_MAX_LINK_RATE from HBR3 to HBR2 after system suspend/resume if the DP_DP13_DPCD_REV registers are not read subsequently also as required.

Fix this by reading DP_DP13_DPCD_REV registers as well, matching what is done during connector detection. While at it also fix up the same call in drm_dp_mst_dump_topology().

---
 drivers/gpu/drm/display/drm_dp_mst_topology.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/gpu/drm/display/drm_dp_mst_topology.c +2 -5
@@ -3860,9 +3860,7 @@ int drm_dp_mst_topology_mgr_resume(struc
 	if (!mgr->mst_primary)
 		goto out_fail;
 
-	ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd,
-			       DP_RECEIVER_CAP_SIZE);
-	if (ret != DP_RECEIVER_CAP_SIZE) {
+	if (drm_dp_read_dpcd_caps(mgr->aux, mgr->dpcd) < 0) {
 		drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n");
 		goto out_fail;
 	}
@@ -4911,8 +4909,7 @@ void drm_dp_mst_dump_topology(struct seq
 		u8 buf[DP_PAYLOAD_TABLE_SIZE];
 		int ret;
 
-		ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, buf, DP_RECEIVER_CAP_SIZE);
-		if (ret) {
+		if (drm_dp_read_dpcd_caps(mgr->aux, buf) < 0) {
 			seq_printf(m, "dpcd read failed\n");
 			goto out;
 		}
author maintainer
#87 lore raw

PATCH 89/1157 drm/nouveau: fix another off-by-one in nvbios_addr

In reply to Greg Kroah-Hartman

From: Timur Tabi <[email protected]>

commit c441d28945fb113220d48d6c86ebc0b090a2b677 upstream.

This check determines whether a given address is part of image 0 or image 1. Image 1 starts at offset image0_size, so that address should be included.

Fixes 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc <[email protected]> # v4.8+
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nvkm/subdev/bios/base.c +1 -1
@@ -33,7 +33,7 @@ nvbios_addr(struct nvkm_bios *bios, u32
 {
 	u32 p = *addr;
 
-	if (*addr > bios->image0_size && bios->imaged_addr) {
+	if (*addr >= bios->image0_size && bios->imaged_addr) {
 		*addr -= bios->image0_size;
 		*addr += bios->imaged_addr;
 	}
author maintainer
#88 lore raw

PATCH 90/1157 drm/nouveau: Dont pm_runtime_put_sync(), only pm_runtime_put_autosuspend()

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

commit c96cfaf8fc02d4bb70727dfa7ce7841a3cff9be2 upstream.

While trying to fix another issue, it occurred to me that I don't actually think there is any situation where we want pm_runtime_put() in nouveau to be synchronous. In fact, this kind of just seems like it would cause issues where we may unexpectedly block a thread we don't expect to be blocked.

So, let's only use pm_runtime_put_autosuspend().

Changes since v1:
* Use pm_runtime_put_autosuspend(), not pm_runtime_put()

Fixes 3a6536c51d5d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
Cc Hans de Goede <[email protected]>
Cc <[email protected]> # v4.10+
---
 drivers/gpu/drm/nouveau/nouveau_display.c |    2 +-
 drivers/gpu/drm/nouveau/nouveau_fbcon.c   |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/nouveau/nouveau_display.c +1 -1
@@ -515,7 +515,7 @@ nouveau_display_hpd_work(struct work_str
 
 	pm_runtime_mark_last_busy(drm->dev->dev);
 noop:
-	pm_runtime_put_sync(drm->dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
 }
 
 #ifdef CONFIG_ACPI
drivers/gpu/drm/nouveau/nouveau_fbcon.c +1 -1
@@ -466,7 +466,7 @@ nouveau_fbcon_set_suspend_work(struct wo
 	if (state == FBINFO_STATE_RUNNING) {
 		nouveau_fbcon_hotplug_resume(drm->fbcon);
 		pm_runtime_mark_last_busy(drm->dev->dev);
-		pm_runtime_put_sync(drm->dev->dev);
+		pm_runtime_put_autosuspend(drm->dev->dev);
 	}
 }
 
author maintainer
#89 lore raw

PATCH 91/1157 drm/nouveau/acpi: Dont print error when we get -EINPROGRESS from pm_runtime

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

commit 53c26181950ddc3c8ace3c0939c89e9c4d8deeb9 upstream.

Since this isn't actually a failure.

Fixes 79e765ad665d ("drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early")
Cc <[email protected]> # v4.19+
---
 drivers/gpu/drm/nouveau/nouveau_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_display.c +1 -1
@@ -537,7 +537,7 @@ nouveau_display_acpi_ntfy(struct notifie
 				 * it's own hotplug events.
 				 */
 				pm_runtime_put_autosuspend(drm->dev->dev);
-			} else if (ret == 0) {
+			} else if (ret == 0 || ret == -EINPROGRESS) {
 				/* We've started resuming the GPU already, so
 				 * it will handle scheduling a full reprobe
 				 * itself
author maintainer
#90 lore raw

PATCH 92/1157 drm/nouveau/kms: Fix failure path for creating DP connectors

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

commit ca0367ca5d9216644b41f86348d6661f8d9e32d8 upstream.

It looks like that when we moved nouveau over to using drm_dp_aux_init() and registering it's aux bus during late connector registration, we totally forgot to fix the failure codepath in nouveau_connector_create() - as it still seems to assume that drm_dp_aux_init() can fail (it can't).

So, let's fix that and also add a missing check to ensure that we've properly allocated nv_connector->aux.name while we're at it.

Fixes fd43ad9d47e7 ("drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister")
Cc <[email protected]> # v5.14+
---
 drivers/gpu/drm/nouveau/nouveau_connector.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/gpu/drm/nouveau/nouveau_connector.c +3 -5
@@ -1361,13 +1361,11 @@ nouveau_connector_create(struct drm_devi
 		snprintf(aux_name, sizeof(aux_name), "sor-%04x-%04x",
 			 dcbe->hasht, dcbe->hashm);
 		nv_connector->aux.name = kstrdup(aux_name, GFP_KERNEL);
-		drm_dp_aux_init(&nv_connector->aux);
-		if (ret) {
-			NV_ERROR(drm, "Failed to init AUX adapter for sor-%04x-%04x: %d\n",
-				 dcbe->hasht, dcbe->hashm, ret);
+		if (!nv_connector->aux.name) {
 			kfree(nv_connector);
-			return ERR_PTR(ret);
+			return ERR_PTR(-ENOMEM);
 		}
+		drm_dp_aux_init(&nv_connector->aux);
 		fallthrough;
 	default:
 		funcs = &nouveau_connector_funcs;
author maintainer
#91 lore raw

PATCH 93/1157 drm/tegra: Fix vmapping of prime buffers

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit c7860cbee9989882d2908682526a5ef617523cfe upstream.

The code assumes that Tegra GEM is permanently vmapped, which is not true for the scattered buffers. After converting Tegra video decoder driver to V4L API, we're now getting a BUG_ON from dma-buf core on playing video using libvdpau-tegra on T30+ because tegra_gem_prime_vmap() sets vaddr to NULL. Older pre-V4L video decoder driver wasn't vmapping dma-bufs. Fix it by actually vmapping the exported GEMs.

---
 drivers/gpu/drm/tegra/gem.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/gpu/drm/tegra/gem.c +10 -1
@@ -704,14 +704,23 @@ static int tegra_gem_prime_vmap(struct d
 {
 	struct drm_gem_object *gem = buf->priv;
 	struct tegra_bo *bo = to_tegra_bo(gem);
+	void *vaddr;
 
-	iosys_map_set_vaddr(map, bo->vaddr);
+	vaddr = tegra_bo_mmap(&bo->base);
+	if (IS_ERR(vaddr))
+		return PTR_ERR(vaddr);
+
+	iosys_map_set_vaddr(map, vaddr);
 
 	return 0;
 }
 
 static void tegra_gem_prime_vunmap(struct dma_buf *buf, struct iosys_map *map)
 {
+	struct drm_gem_object *gem = buf->priv;
+	struct tegra_bo *bo = to_tegra_bo(gem);
+
+	tegra_bo_munmap(&bo->base, map->vaddr);
 }
 
 static const struct dma_buf_ops tegra_gem_prime_dmabuf_ops = {
author maintainer
#92 lore raw

PATCH 94/1157 drm/amdgpu: Check BOs requested pinning domains against its preferred_domains

In reply to Greg Kroah-Hartman

From: Leo Li <[email protected]>

commit f5ba14043621f4afdf3ad5f92ee2d8dbebbe4340 upstream.

When pinning a buffer, we should check to see if there are any additional restrictions imposed by bo->preferred_domains. This will prevent the BO from being moved to an invalid domain when pinning.

For example, this can happen if the user requests to create a BO in GTT domain for display scanout. amdgpu_dm will allow pinning to either VRAM or GTT domains, since DCN can scanout from either or. However, in amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is adequate carveout. This can lead to pinning to VRAM despite the user requesting GTT placement for the BO.

v2: Allow the kernel to override the domain, which can happen when
exporting a BO to a V4L camera (for example).

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +4 -0
@@ -882,6 +882,10 @@ int amdgpu_bo_pin_restricted(struct amdg
 	if (WARN_ON_ONCE(min_offset > max_offset))
 		return -EINVAL;
 
+	/* Check domain to be pinned to against preferred domains */
+	if (bo->preferred_domains & domain)
+		domain = bo->preferred_domains & domain;
+
 	/* A shared bo cannot be migrated to VRAM */
 	if (bo->tbo.base.import_attach) {
 		if (domain & AMDGPU_GEM_DOMAIN_GTT)
author maintainer
#93 lore raw

PATCH 95/1157 bpf: Fix KASAN use-after-free Read in compute_effective_progs

In reply to Greg Kroah-Hartman

From: Tadeusz Struk <[email protected]>

commit 4c46091ee985ae84c60c5e95055d779fcd291d87 upstream.

Syzbot found a Use After Free bug in compute_effective_progs(). The reproducer creates a number of BPF links, and causes a fault injected alloc to fail, while calling bpf_link_detach on them. Link detach triggers the link to be freed by bpf_link_free(), which calls __cgroup_bpf_detach() and update_effective_progs(). If the memory allocation in this function fails, the function restores the pointer to the bpf_cgroup_link on the cgroup list, but the memory gets freed just after it returns. After this, every subsequent call to update_effective_progs() causes this already deallocated pointer to be dereferenced in prog_list_length(), and triggers KASAN UAF error.

To fix this issue don't preserve the pointer to the prog or link in the list, but remove it and replace it with a dummy prog without shrinking the table. The subsequent call to __cgroup_bpf_detach() or __cgroup_bpf_detach() will correct it.

---
 kernel/bpf/cgroup.c |   70 ++++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 60 insertions(+), 10 deletions(-)
kernel/bpf/cgroup.c +60 -10
@@ -721,6 +721,60 @@ static struct bpf_prog_list *find_detach
 }
 
 /**
+ * purge_effective_progs() - After compute_effective_progs fails to alloc new
+ *                           cgrp->bpf.inactive table we can recover by
+ *                           recomputing the array in place.
+ *
+ * @cgrp: The cgroup which descendants to travers
+ * @prog: A program to detach or NULL
+ * @link: A link to detach or NULL
+ * @atype: Type of detach operation
+ */
+static void purge_effective_progs(struct cgroup *cgrp, struct bpf_prog *prog,
+				  struct bpf_cgroup_link *link,
+				  enum cgroup_bpf_attach_type atype)
+{
+	struct cgroup_subsys_state *css;
+	struct bpf_prog_array *progs;
+	struct bpf_prog_list *pl;
+	struct list_head *head;
+	struct cgroup *cg;
+	int pos;
+
+	/* recompute effective prog array in place */
+	css_for_each_descendant_pre(css, &cgrp->self) {
+		struct cgroup *desc = container_of(css, struct cgroup, self);
+
+		if (percpu_ref_is_zero(&desc->bpf.refcnt))
+			continue;
+
+		/* find position of link or prog in effective progs array */
+		for (pos = 0, cg = desc; cg; cg = cgroup_parent(cg)) {
+			if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))
+				continue;
+
+			head = &cg->bpf.progs[atype];
+			list_for_each_entry(pl, head, node) {
+				if (!prog_list_prog(pl))
+					continue;
+				if (pl->prog == prog && pl->link == link)
+					goto found;
+				pos++;
+			}
+		}
+found:
+		BUG_ON(!cg);
+		progs = rcu_dereference_protected(
+				desc->bpf.effective[atype],
+				lockdep_is_held(&cgroup_mutex));
+
+		/* Remove the program from the array */
+		WARN_ONCE(bpf_prog_array_delete_safe_at(progs, pos),
+			  "Failed to purge a prog from array at index %d", pos);
+	}
+}
+
+/**
  * __cgroup_bpf_detach() - Detach the program or link from a cgroup, and
  *                         propagate the change to descendants
  * @cgrp: The cgroup which descendants to traverse
@@ -739,7 +793,6 @@ static int __cgroup_bpf_detach(struct cg
 	struct bpf_prog_list *pl;
 	struct list_head *progs;
 	u32 flags;
-	int err;
 
 	atype = to_cgroup_bpf_attach_type(type);
 	if (atype < 0)
@@ -761,9 +814,12 @@ static int __cgroup_bpf_detach(struct cg
 	pl->prog = NULL;
 	pl->link = NULL;
 
-	err = update_effective_progs(cgrp, atype);
-	if (err)
-		goto cleanup;
+	if (update_effective_progs(cgrp, atype)) {
+		/* if update effective array failed replace the prog with a dummy prog*/
+		pl->prog = old_prog;
+		pl->link = link;
+		purge_effective_progs(cgrp, old_prog, link, atype);
+	}
 
 	/* now can actually delete it from this cgroup list */
 	list_del(&pl->node);
@@ -775,12 +831,6 @@ static int __cgroup_bpf_detach(struct cg
 		bpf_prog_put(old_prog);
 	static_branch_dec(&cgroup_bpf_enabled_key[atype]);
 	return 0;
-
-cleanup:
-	/* restore back prog or link */
-	pl->prog = old_prog;
-	pl->link = link;
-	return err;
 }
 
 static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,
author maintainer
#94 lore raw

PATCH 96/1157 btrfs: reject log replay if there is unsupported RO compat flag

In reply to Greg Kroah-Hartman

From: Qu Wenruo <[email protected]>

commit dc4d31684974d140250f3ee612c3f0cab13b3146 upstream.

[BUG]
If we have a btrfs image with dirty log, along with an unsupported RO compatible flag:

log_root 30474240
...
compat_flags 0x0
compat_ro_flags 0x40000003

			( FREE_SPACE_TREE |
			  FREE_SPACE_TREE_VALID |
			  unknown flag: 0x40000000 )

Then even if we can only mount it RO, we will still cause metadata update for log replay:

BTRFS info (device dm-1): flagging fs with big metadata feature BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): has skinny extents
BTRFS info (device dm-1): start tree-log replay

This is definitely against RO compact flag requirement.

[CAUSE]
RO compact flag only forces us to do RO mount, but we will still do log replay for plain RO mount.

Thus this will result us to do log replay and update metadata.

This can be very problematic for new RO compat flag, for example older kernel can not understand v2 cache, and if we allow metadata update on RO mount and invalidate/corrupt v2 cache.

[FIX]
Just reject the mount unless rescue=nologreplay is provided:

BTRFS error (device dm-1): cannot replay dirty log with unsupport optional features (0x40000000), try rescue=nologreplay instead

We don't want to set rescue=nologreply directly, as this would make the end user to read the old data, and cause confusion.

Since the such case is really rare, we're mostly fine to just reject the mount with an error message, which also includes the proper workaround.

---
 fs/btrfs/disk-io.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)
fs/btrfs/disk-io.c +14 -0
@@ -3670,6 +3670,20 @@ int __cold open_ctree(struct super_block
 		err = -EINVAL;
 		goto fail_alloc;
 	}
+	/*
+	 * We have unsupported RO compat features, although RO mounted, we
+	 * should not cause any metadata write, including log replay.
+	 * Or we could screw up whatever the new feature requires.
+	 */
+	if (unlikely(features && btrfs_super_log_root(disk_super) &&
+		     !btrfs_test_opt(fs_info, NOLOGREPLAY))) {
+		btrfs_err(fs_info,
+"cannot replay dirty log with unsupported compat_ro features (0x%llx), try rescue=nologreplay",
+			  features);
+		err = -EINVAL;
+		goto fail_alloc;
+	}
+
 
 	if (sectorsize < PAGE_SIZE) {
 		struct btrfs_subpage_info *subpage_info;
author maintainer
#95 lore raw

PATCH 97/1157 mtd: rawnand: arasan: Fix clock rate in NV-DDR

In reply to Greg Kroah-Hartman

From: Olga Kitaina <[email protected]>

commit e16eceea863b417fd328588b1be1a79de0bc937f upstream.

According to the Arasan NAND controller spec, the flash clock rate for SDR must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the CLK line for the mode. The driver previously always set 100 MHz for NV-DDR, which would result in incorrect behavior for NV-DDR modes 0-4.

The appropriate clock rate can be calculated from the NV-DDR timing parameters as 1/tCK, or for rates measured in picoseconds, 10^12 / nand_nvddr_timings->tCK_min.

---
 drivers/mtd/nand/raw/arasan-nand-controller.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/mtd/nand/raw/arasan-nand-controller.c +7 -1
@@ -1043,7 +1043,13 @@ static int anfc_setup_interface(struct n
 				 DQS_BUFF_SEL_OUT(dqs_mode);
 	}
 
-	anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
+	if (nand_interface_is_sdr(conf)) {
+		anand->clk = ANFC_XLNX_SDR_DFLT_CORE_CLK;
+	} else {
+		/* ONFI timings are defined in picoseconds */
+		anand->clk = div_u64((u64)NSEC_PER_SEC * 1000,
+				     conf->timings.nvddr.tCK_min);
+	}
 
 	/*
 	 * Due to a hardware bug in the ZynqMP SoC, SDR timing modes 0-1 work
author maintainer
#96 lore raw

PATCH 98/1157 mtd: rawnand: arasan: Update NAND bus clock instead of system clock

In reply to Greg Kroah-Hartman

From: Amit Kumar Mahapatra <[email protected]>

commit 7499bfeedb47efc1ee4dc793b92c610d46e6d6a6 upstream.

In current implementation the Arasan NAND driver is updating the system clock(i.e., anand->clk) in accordance to the timing modes (i.e., SDR or NVDDR). But as per the Arasan NAND controller spec the flash clock or the NAND bus clock(i.e., nfc->bus_clk), need to be updated instead. This patch keeps the system clock unchanged and updates the NAND bus clock as per the timing modes.

Fixes 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
---
 drivers/mtd/nand/raw/arasan-nand-controller.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mtd/nand/raw/arasan-nand-controller.c +4 -4
@@ -347,17 +347,17 @@ static int anfc_select_target(struct nan
 
 	/* Update clock frequency */
 	if (nfc->cur_clk != anand->clk) {
-		clk_disable_unprepare(nfc->controller_clk);
-		ret = clk_set_rate(nfc->controller_clk, anand->clk);
+		clk_disable_unprepare(nfc->bus_clk);
+		ret = clk_set_rate(nfc->bus_clk, anand->clk);
 		if (ret) {
 			dev_err(nfc->dev, "Failed to change clock rate\n");
 			return ret;
 		}
 
-		ret = clk_prepare_enable(nfc->controller_clk);
+		ret = clk_prepare_enable(nfc->bus_clk);
 		if (ret) {
 			dev_err(nfc->dev,
-				"Failed to re-enable the controller clock\n");
+				"Failed to re-enable the bus clock\n");
 			return ret;
 		}
 
author maintainer
#97 lore raw

PATCH 99/1157 um: Remove straying parenthesis

In reply to Greg Kroah-Hartman

From: Benjamin Beichler <[email protected]>

commit c6496e0a4a90d8149203c16323cff3fa46e422e7 upstream.

Commit e3a33af812c6 ("um: fix and optimize xor select template for CONFIG64 and timetravel mode") caused a build regression when CONFIG_XOR_BLOCKS and CONFIG_UML_TIME_TRAVEL_SUPPORT are selected.
Fix it by removing the straying parenthesis.

Fixes e3a33af812c6 ("um: fix and optimize xor select template for CONFIG64 and timetravel mode")
[rw: Added commit message]
---
 arch/um/include/asm/xor.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/um/include/asm/xor.h +1 -1
@@ -18,7 +18,7 @@
 #undef XOR_SELECT_TEMPLATE
 /* pick an arbitrary one - measuring isn't possible with inf-cpu */
 #define XOR_SELECT_TEMPLATE(x)	\
-	(time_travel_mode == TT_MODE_INFCPU ? TT_CPU_INF_XOR_DEFAULT : x))
+	(time_travel_mode == TT_MODE_INFCPU ? TT_CPU_INF_XOR_DEFAULT : x)
 #endif
 
 #endif
author maintainer
#98 lore raw

PATCH 100/1157 um: seed rng using host OS rng

In reply to Greg Kroah-Hartman

From: Jason A. Donenfeld <[email protected]>

commit 0b9ba6135d7f18b82f3d8bebb55ded725ba88e0e upstream.

UML generally does not provide access to special CPU instructions like RDRAND, and execution tends to be rather deterministic, with no real hardware interrupts, making good randomness really very hard, if not all together impossible. Not only is this a security eyebrow raiser, but it's also quite annoying when trying to do various pieces of UML-based automation that takes a long time to boot, if ever.

Fix this by trivially calling getrandom() in the host and using that seed as "bootloader randomness", which initializes the rng immediately at UML boot.

The old behavior can be restored the same way as on any other arch, by way of CONFIG_TRUST_BOOTLOADER_RANDOMNESS=n or random.trust_bootloader=0. So seen from that perspective, this just makes UML act like other archs, which is positive in its own right.

Additionally, wire up arch_get_random_{int,long}() in the same way, so that reseeds can also make use of the host RNG, controllable by CONFIG_TRUST_CPU_RANDOMNESS and random.trust_cpu, per usual.

---
 arch/um/include/asm/archrandom.h |   30 ++++++++++++++++++++++++++++++
 arch/um/include/shared/os.h      |    7 +++++++
 arch/um/kernel/um_arch.c         |    8 ++++++++
 arch/um/os-Linux/util.c          |    6 ++++++
 4 files changed, 51 insertions(+)
 create mode 100644 arch/um/include/asm/archrandom.h
arch/um/include/asm/archrandom.h new file +30 -0
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_UM_ARCHRANDOM_H__
+#define __ASM_UM_ARCHRANDOM_H__
+
+#include <linux/types.h>
+
+/* This is from <os.h>, but better not to #include that in a global header here. */
+ssize_t os_getrandom(void *buf, size_t len, unsigned int flags);
+
+static inline bool __must_check arch_get_random_long(unsigned long *v)
+{
+	return os_getrandom(v, sizeof(*v), 0) == sizeof(*v);
+}
+
+static inline bool __must_check arch_get_random_int(unsigned int *v)
+{
+	return os_getrandom(v, sizeof(*v), 0) == sizeof(*v);
+}
+
+static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
+{
+	return false;
+}
+
+static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
+{
+	return false;
+}
+
+#endif
arch/um/include/shared/os.h +7 -0
@@ -11,6 +11,12 @@
 #include <irq_user.h>
 #include <longjmp.h>
 #include <mm_id.h>
+/* This is to get size_t */
+#ifndef __UM_HOST__
+#include <linux/types.h>
+#else
+#include <sys/types.h>
+#endif
 
 #define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
 
@@ -243,6 +249,7 @@ extern void stack_protections(unsigned l
 extern int raw(int fd);
 extern void setup_machinename(char *machine_out);
 extern void setup_hostinfo(char *buf, int len);
+extern ssize_t os_getrandom(void *buf, size_t len, unsigned int flags);
 extern void os_dump_core(void) __attribute__ ((noreturn));
 extern void um_early_printk(const char *s, unsigned int n);
 extern void os_fix_helper_signals(void);
arch/um/kernel/um_arch.c +8 -0
@@ -16,6 +16,7 @@
 #include <linux/sched/task.h>
 #include <linux/kmsg_dump.h>
 #include <linux/suspend.h>
+#include <linux/random.h>
 
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
@@ -406,6 +407,8 @@ int __init __weak read_initrd(void)
 
 void __init setup_arch(char **cmdline_p)
 {
+	u8 rng_seed[32];
+
 	stack_protections((unsigned long) &init_thread_info);
 	setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
 	mem_total_pages(physmem_size, iomem_size, highmem);
@@ -416,6 +419,11 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 	setup_hostinfo(host_info, sizeof host_info);
+
+	if (os_getrandom(rng_seed, sizeof(rng_seed), 0) == sizeof(rng_seed)) {
+		add_bootloader_randomness(rng_seed, sizeof(rng_seed));
+		memzero_explicit(rng_seed, sizeof(rng_seed));
+	}
 }
 
 void __init check_bugs(void)
arch/um/os-Linux/util.c +6 -0
@@ -14,6 +14,7 @@
 #include <sys/wait.h>
 #include <sys/mman.h>
 #include <sys/utsname.h>
+#include <sys/random.h>
 #include <init.h>
 #include <os.h>
 
@@ -96,6 +97,11 @@ static inline void __attribute__ ((noret
 			exit(127);
 }
 
+ssize_t os_getrandom(void *buf, size_t len, unsigned int flags)
+{
+	return getrandom(buf, len, flags);
+}
+
 /*
  * UML helper threads must not handle SIGWINCH/INT/TERM
  */
author maintainer
#99 lore raw

PATCH 101/1157 iio: fix iio_format_avail_range() printing for none IIO_VAL_INT

In reply to Greg Kroah-Hartman

From: Fawzi Khaber <[email protected]>

commit 5e1f91850365de55ca74945866c002fda8f00331 upstream.

iio_format_avail_range() should print range as follow [min, step, max], so the function was previously calling iio_format_list() with length = 3, length variable refers to the array size of values not the number of elements. In case of non IIO_VAL_INT values each element has integer part and decimal part. With length = 3 this would cause premature end of loop and result in printing only one element.

---
 drivers/iio/industrialio-core.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/iio/industrialio-core.c +17 -1
@@ -835,7 +835,23 @@ static ssize_t iio_format_avail_list(cha
 
 static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
 {
-	return iio_format_list(buf, vals, type, 3, "[", "]");
+	int length;
+
+	/*
+	 * length refers to the array size , not the number of elements.
+	 * The purpose is to print the range [min , step ,max] so length should
+	 * be 3 in case of int, and 6 for other types.
+	 */
+	switch (type) {
+	case IIO_VAL_INT:
+		length = 3;
+		break;
+	default:
+		length = 6;
+		break;
+	}
+
+	return iio_format_list(buf, vals, type, length, "[", "]");
 }
 
 static ssize_t iio_read_channel_info_avail(struct device *dev,
author maintainer
#100 lore raw

PATCH 102/1157 iio: light: isl29028: Fix the warning in isl29028_remove()

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

commit 06674fc7c003b9d0aa1d37fef7ab2c24802cc6ad upstream.

The driver use the non-managed form of the register function in isl29028_remove(). To keep the release order as mirroring the ordering in probe, the driver should use non-managed form in probe, too.

The following log reveals it:

[   32.374955] isl29028 0-0010: remove
[   32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[   32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[   32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[   32.385461] Call Trace:
[   32.385807]  sysfs_unmerge_group+0x59/0x110
[   32.386110]  dpm_sysfs_remove+0x58/0xc0
[   32.386391]  device_del+0x296/0xe50
[   32.386959]  cdev_device_del+0x1d/0xd0
[   32.387231]  devm_iio_device_unreg+0x27/0xb0
[   32.387542]  devres_release_group+0x319/0x3d0
[   32.388162]  i2c_device_remove+0x93/0x1f0
Fixes 2db5054ac28d ("staging: iio: isl29028: add runtime power management support")
---
 drivers/iio/light/isl29028.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/light/isl29028.c +1 -1
@@ -625,7 +625,7 @@ static int isl29028_probe(struct i2c_cli
 					 ISL29028_POWER_OFF_DELAY_MS);
 	pm_runtime_use_autosuspend(&client->dev);
 
-	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+	ret = iio_device_register(indio_dev);
 	if (ret < 0) {
 		dev_err(&client->dev,
 			"%s(): iio registration failed with error %d\n",
author maintainer
#101 lore raw

PATCH 103/1157 scsi: lpfc: Remove extra atomic_inc on cmd_pending in queuecommand after VMID

In reply to Greg Kroah-Hartman

From: James Smart <[email protected]>

commit 0948a9c5386095baae4012190a6b65aba684a907 upstream.

VMID introduced an extra increment of cmd_pending, causing double-counting of the I/O. The normal increment ios performed in lpfc_get_scsi_buf.

---
 drivers/scsi/lpfc/lpfc_scsi.c |    1 -
 1 file changed, 1 deletion(-)
drivers/scsi/lpfc/lpfc_scsi.c +0 -1
@@ -5456,7 +5456,6 @@ lpfc_queuecommand(struct Scsi_Host *shos
 				cur_iocbq->cmd_flag |= LPFC_IO_VMID;
 		}
 	}
-	atomic_inc(&ndlp->cmd_pending);
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	if (unlikely(phba->hdwqstat_on & LPFC_CHECK_SCSI_IO))
author maintainer
#102 lore raw

PATCH 104/1157 scsi: sg: Allow waiting for commands to complete on removed device

In reply to Greg Kroah-Hartman

From: Tony Battersby <[email protected]>

commit 3455607fd7be10b449f5135c00dc306b85dc0d21 upstream.

When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal.

Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read.

---
 drivers/scsi/sg.c |   53 +++++++++++++++++++++++++++++++++--------------------
 1 file changed, 33 insertions(+), 20 deletions(-)
drivers/scsi/sg.c +33 -20
@@ -195,7 +195,7 @@ static void sg_link_reserve(Sg_fd * sfp,
 static void sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp);
 static Sg_fd *sg_add_sfp(Sg_device * sdp);
 static void sg_remove_sfp(struct kref *);
-static Sg_request *sg_get_rq_mark(Sg_fd * sfp, int pack_id);
+static Sg_request *sg_get_rq_mark(Sg_fd * sfp, int pack_id, bool *busy);
 static Sg_request *sg_add_request(Sg_fd * sfp);
 static int sg_remove_request(Sg_fd * sfp, Sg_request * srp);
 static Sg_device *sg_get_dev(int dev);
@@ -444,6 +444,7 @@ sg_read(struct file *filp, char __user *
 	Sg_fd *sfp;
 	Sg_request *srp;
 	int req_pack_id = -1;
+	bool busy;
 	sg_io_hdr_t *hp;
 	struct sg_header *old_hdr;
 	int retval;
@@ -466,20 +467,16 @@ sg_read(struct file *filp, char __user *
 	if (retval)
 		return retval;
 
-	srp = sg_get_rq_mark(sfp, req_pack_id);
+	srp = sg_get_rq_mark(sfp, req_pack_id, &busy);
 	if (!srp) {		/* now wait on packet to arrive */
-		if (atomic_read(&sdp->detaching))
-			return -ENODEV;
 		if (filp->f_flags & O_NONBLOCK)
 			return -EAGAIN;
 		retval = wait_event_interruptible(sfp->read_wait,
-			(atomic_read(&sdp->detaching) ||
-			(srp = sg_get_rq_mark(sfp, req_pack_id))));
-		if (atomic_read(&sdp->detaching))
-			return -ENODEV;
-		if (retval)
-			/* -ERESTARTSYS as signal hit process */
-			return retval;
+			((srp = sg_get_rq_mark(sfp, req_pack_id, &busy)) ||
+			(!busy && atomic_read(&sdp->detaching))));
+		if (!srp)
+			/* signal or detaching */
+			return retval ? retval : -ENODEV;
 	}
 	if (srp->header.interface_id != '\0')
 		return sg_new_read(sfp, buf, count, srp);
@@ -940,9 +937,7 @@ sg_ioctl_common(struct file *filp, Sg_de
 		if (result < 0)
 			return result;
 		result = wait_event_interruptible(sfp->read_wait,
-			(srp_done(sfp, srp) || atomic_read(&sdp->detaching)));
-		if (atomic_read(&sdp->detaching))
-			return -ENODEV;
+			srp_done(sfp, srp));
 		write_lock_irq(&sfp->rq_list_lock);
 		if (srp->done) {
 			srp->done = 2;
@@ -2079,19 +2074,28 @@ sg_unlink_reserve(Sg_fd * sfp, Sg_reques
 }
 
 static Sg_request *
-sg_get_rq_mark(Sg_fd * sfp, int pack_id)
+sg_get_rq_mark(Sg_fd * sfp, int pack_id, bool *busy)
 {
 	Sg_request *resp;
 	unsigned long iflags;
 
+	*busy = false;
 	write_lock_irqsave(&sfp->rq_list_lock, iflags);
 	list_for_each_entry(resp, &sfp->rq_list, entry) {
-		/* look for requests that are ready + not SG_IO owned */
-		if ((1 == resp->done) && (!resp->sg_io_owned) &&
+		/* look for requests that are not SG_IO owned */
+		if ((!resp->sg_io_owned) &&
 		    ((-1 == pack_id) || (resp->header.pack_id == pack_id))) {
-			resp->done = 2;	/* guard against other readers */
-			write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
-			return resp;
+			switch (resp->done) {
+			case 0: /* request active */
+				*busy = true;
+				break;
+			case 1: /* request done; response ready to return */
+				resp->done = 2;	/* guard against other readers */
+				write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
+				return resp;
+			case 2: /* response already being returned */
+				break;
+			}
 		}
 	}
 	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
@@ -2145,6 +2149,15 @@ sg_remove_request(Sg_fd * sfp, Sg_reques
 		res = 1;
 	}
 	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
+
+	/*
+	 * If the device is detaching, wakeup any readers in case we just
+	 * removed the last response, which would leave nothing for them to
+	 * return other than -ENODEV.
+	 */
+	if (unlikely(atomic_read(&sfp->parentdp->detaching)))
+		wake_up_interruptible_all(&sfp->read_wait);
+
 	return res;
 }
 
author maintainer
#103 lore raw

PATCH 105/1157 scsi: qla2xxx: Fix incorrect display of max frame size

In reply to Greg Kroah-Hartman

From: Bikash Hazarika <[email protected]>

commit cf3b4fb655796674e605268bd4bfb47a47c8bce6 upstream.

Replace display field with the correct field.

---
 drivers/scsi/qla2xxx/qla_def.h  |    1 +
 drivers/scsi/qla2xxx/qla_gs.c   |    9 +++------
 drivers/scsi/qla2xxx/qla_init.c |    2 ++
 drivers/scsi/qla2xxx/qla_isr.c  |    4 +---
 4 files changed, 7 insertions(+), 9 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +1 -0
@@ -3975,6 +3975,7 @@ struct qla_hw_data {
 	/* SRB cache. */
 #define SRB_MIN_REQ     128
 	mempool_t       *srb_mempool;
+	u8 port_name[WWN_SIZE];
 
 	volatile struct {
 		uint32_t	mbox_int		:1;
drivers/scsi/qla2xxx/qla_gs.c +3 -6
@@ -1596,7 +1596,6 @@ qla2x00_hba_attributes(scsi_qla_host_t *
 	unsigned int callopt)
 {
 	struct qla_hw_data *ha = vha->hw;
-	struct init_cb_24xx *icb24 = (void *)ha->init_cb;
 	struct new_utsname *p_sysid = utsname();
 	struct ct_fdmi_hba_attr *eiter;
 	uint16_t alen;
@@ -1758,8 +1757,8 @@ qla2x00_hba_attributes(scsi_qla_host_t *
 	/* MAX CT Payload Length */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH);
-	eiter->a.max_ct_len = cpu_to_be32(le16_to_cpu(IS_FWI2_CAPABLE(ha) ?
-		icb24->frame_payload_size : ha->init_cb->frame_payload_size));
+	eiter->a.max_ct_len = cpu_to_be32(ha->frame_payload_size >> 2);
+
 	alen = sizeof(eiter->a.max_ct_len);
 	alen += FDMI_ATTR_TYPELEN(eiter);
 	eiter->len = cpu_to_be16(alen);
@@ -1851,7 +1850,6 @@ qla2x00_port_attributes(scsi_qla_host_t
 	unsigned int callopt)
 {
 	struct qla_hw_data *ha = vha->hw;
-	struct init_cb_24xx *icb24 = (void *)ha->init_cb;
 	struct new_utsname *p_sysid = utsname();
 	char *hostname = p_sysid ?
 		p_sysid->nodename : fc_host_system_hostname(vha->host);
@@ -1903,8 +1901,7 @@ qla2x00_port_attributes(scsi_qla_host_t
 	/* Max frame size. */
 	eiter = entries + size;
 	eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
-	eiter->a.max_frame_size = cpu_to_be32(le16_to_cpu(IS_FWI2_CAPABLE(ha) ?
-		icb24->frame_payload_size : ha->init_cb->frame_payload_size));
+	eiter->a.max_frame_size = cpu_to_be32(ha->frame_payload_size);
 	alen = sizeof(eiter->a.max_frame_size);
 	alen += FDMI_ATTR_TYPELEN(eiter);
 	eiter->len = cpu_to_be16(alen);
drivers/scsi/qla2xxx/qla_init.c +2 -0
@@ -4509,6 +4509,8 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 			 BIT_6) != 0;
 		ql_dbg(ql_dbg_init, vha, 0x00bc, "FA-WWPN Support: %s.\n",
 		    (ha->flags.fawwpn_enabled) ? "enabled" : "disabled");
+		/* Init_cb will be reused for other command(s).  Save a backup copy of port_name */
+		memcpy(ha->port_name, ha->init_cb->port_name, WWN_SIZE);
 	}
 
 	/* ELS pass through payload is limit by frame size. */
drivers/scsi/qla2xxx/qla_isr.c +1 -3
@@ -1354,9 +1354,7 @@ skip_rio:
 			if (!vha->vp_idx) {
 				if (ha->flags.fawwpn_enabled &&
 				    (ha->current_topology == ISP_CFG_F)) {
-					void *wwpn = ha->init_cb->port_name;
-
-					memcpy(vha->port_name, wwpn, WWN_SIZE);
+					memcpy(vha->port_name, ha->port_name, WWN_SIZE);
 					fc_host_port_name(vha->host) =
 					    wwn_to_u64(vha->port_name);
 					ql_dbg(ql_dbg_init + ql_dbg_verbose,
author maintainer
#104 lore raw

PATCH 106/1157 scsi: qla2xxx: Zero undefined mailbox IN registers

In reply to Greg Kroah-Hartman

From: Bikash Hazarika <[email protected]>

commit 6c96a3c7d49593ef15805f5e497601c87695abc9 upstream.

While requesting a new mailbox command, driver does not write any data to unused registers. Initialize the unused register value to zero while requesting a new mailbox command to prevent stale entry access by firmware.

---
 drivers/scsi/qla2xxx/qla_mbx.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/qla2xxx/qla_mbx.c +2 -0
@@ -238,6 +238,8 @@ qla2x00_mailbox_command(scsi_qla_host_t
 			ql_dbg(ql_dbg_mbx, vha, 0x1112,
 			    "mbox[%d]<-0x%04x\n", cnt, *iptr);
 			wrt_reg_word(optr, *iptr);
+		} else {
+			wrt_reg_word(optr, 0);
 		}
 
 		mboxes >>= 1;
author maintainer
#105 lore raw

PATCH 107/1157 soundwire: qcom: Check device status before reading devid

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

commit aa1262ca66957183ea1fb32a067e145b995f3744 upstream.

As per hardware datasheet its recommended that we check the device status before reading devid assigned by auto-enumeration.

Without this patch we see SoundWire devices with invalid enumeration addresses on the bus.

---
 drivers/soundwire/qcom.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/soundwire/qcom.c +4 -0
@@ -471,6 +471,10 @@ static int qcom_swrm_enumerate(struct sd
 	char *buf1 = (char *)&val1, *buf2 = (char *)&val2;
 
 	for (i = 1; i <= SDW_MAX_DEVICES; i++) {
+		/* do not continue if the status is Not Present  */
+		if (!ctrl->status[i])
+			continue;
+
 		/*SCP_Devid5 - Devid 4*/
 		ctrl->reg_read(ctrl, SWRM_ENUMERATOR_SLAVE_DEV_ID_1(i), &val1);
 
author maintainer
#106 lore raw

PATCH 108/1157 ksmbd: fix memory leak in smb2_handle_negotiate

In reply to Greg Kroah-Hartman

From: Namjae Jeon <[email protected]>

commit aa7253c2393f6dcd6a1468b0792f6da76edad917 upstream.

The allocated memory didn't free under an error path in smb2_handle_negotiate().

Fixes e2f34481b24d ("cifsd: add server-side procedures for SMB3")
---
 fs/ksmbd/smb2pdu.c |    4 ++++
 1 file changed, 4 insertions(+)
fs/ksmbd/smb2pdu.c +4 -0
@@ -1139,12 +1139,16 @@ int smb2_handle_negotiate(struct ksmbd_w
 			       status);
 			rsp->hdr.Status = status;
 			rc = -EINVAL;
+			kfree(conn->preauth_info);
+			conn->preauth_info = NULL;
 			goto err_out;
 		}
 
 		rc = init_smb3_11_server(conn);
 		if (rc < 0) {
 			rsp->hdr.Status = STATUS_INVALID_PARAMETER;
+			kfree(conn->preauth_info);
+			conn->preauth_info = NULL;
 			goto err_out;
 		}
 
author maintainer
#107 lore raw

PATCH 109/1157 ksmbd: prevent out of bound read for SMB2_TREE_CONNNECT

In reply to Greg Kroah-Hartman

From: Hyunchul Lee <[email protected]>

commit 824d4f64c20093275f72fc8101394d75ff6a249e upstream.

if Status is not 0 and PathLength is long,
smb_strndup_from_utf16 could make out of bound
read in smb2_tree_connnect.

This bug can lead an oops looking something like:

[ 1553.882047] BUG: KASAN: slab-out-of-bounds in smb_strndup_from_utf16+0x469/0x4c0 [ksmbd]
[ 1553.882064] Read of size 2 at addr ffff88802c4eda04 by task kworker/0:2/42805
...
[ 1553.882095] Call Trace:
[ 1553.882098]  <TASK>
[ 1553.882101]  dump_stack_lvl+0x49/0x5f
[ 1553.882107]  print_report.cold+0x5e/0x5cf
[ 1553.882112]  ? smb_strndup_from_utf16+0x469/0x4c0 [ksmbd]
[ 1553.882122]  kasan_report+0xaa/0x120
[ 1553.882128]  ? smb_strndup_from_utf16+0x469/0x4c0 [ksmbd]
[ 1553.882139]  __asan_report_load_n_noabort+0xf/0x20
[ 1553.882143]  smb_strndup_from_utf16+0x469/0x4c0 [ksmbd]
[ 1553.882155]  ? smb_strtoUTF16+0x3b0/0x3b0 [ksmbd]
[ 1553.882166]  ? __kmalloc_node+0x185/0x430
[ 1553.882171]  smb2_tree_connect+0x140/0xab0 [ksmbd]
[ 1553.882185]  handle_ksmbd_work+0x30e/0x1020 [ksmbd]
[ 1553.882197]  process_one_work+0x778/0x11c0
[ 1553.882201]  ? _raw_spin_lock_irq+0x8e/0xe0
[ 1553.882206]  worker_thread+0x544/0x1180
[ 1553.882209]  ? __cpuidle_text_end+0x4/0x4
[ 1553.882214]  kthread+0x282/0x320
[ 1553.882218]  ? process_one_work+0x11c0/0x11c0
[ 1553.882221]  ? kthread_complete_and_exit+0x30/0x30
[ 1553.882225]  ret_from_fork+0x1f/0x30
[ 1553.882231]  </TASK>

There is no need to check error request validation in server. This check allow invalid requests not to validate message.

Fixes e2f34481b24d ("cifsd: add server-side procedures for SMB3")
---
 fs/ksmbd/smb2misc.c |    5 -----
 1 file changed, 5 deletions(-)
fs/ksmbd/smb2misc.c +0 -5
@@ -90,11 +90,6 @@ static int smb2_get_data_area_len(unsign
 	*off = 0;
 	*len = 0;
 
-	/* error reqeusts do not have data area */
-	if (hdr->Status && hdr->Status != STATUS_MORE_PROCESSING_REQUIRED &&
-	    (((struct smb2_err_rsp *)hdr)->StructureSize) == SMB2_ERROR_STRUCTURE_SIZE2_LE)
-		return ret;
-
 	/*
 	 * Following commands have data areas so we have to get the location
 	 * of the data buffer offset and data buffer length for the particular