arm: bcmbca: move bcm68360 support under CONFIG_ARCH_BCMBCA
Subsystems (8)
William Zhang
maintainerv2 cover arm: bcmbca: move bcm68360 support under CONFIG_ARCH_BCMBCA
BCM68360 is a variant for the main PON chip BCM6856 which is part of the Broadcom BCA (Broadband Carrier Access origin) chipset family. BCM68360 was originally added by Philippe before Broadcom started to upstream the support for BCMBCA SoCs. The ARM based Broadband SoC family is now supported under the unified ARCH_BCMBCA config. This patch series migrate the BCM68360 support under the config of ARCH_BCMBCA and BCM6856.
This patch series need to apply on top of my previous patch series [1].
[1] https://lists.denx.de/pipermail/u-boot/2022-August/491581.html
Changes in v2:
- Bring Philippe Reynes copyright tag from 68360 dts to 6856 dts
William Zhang (3):
arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA
arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360
arm: bcmbca: make bcm68360 driver depending on CONFIG_BCM6856
MAINTAINERS | 1 + arch/arm/Kconfig | 7 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm68360.dtsi | 217 ------------------- arch/arm/dts/bcm6856.dtsi | 253 +++++++++++++++++++++++ arch/arm/dts/bcm968360bg.dts | 6 +- arch/arm/dts/bcm96856.dts | 30 +++ arch/arm/mach-bcmbca/Kconfig | 8 + arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6856/Kconfig | 17 ++ arch/arm/mach-bcmbca/bcm6856/Makefile | 5 + arch/arm/mach-bcmbca/bcm6856/mmu_table.c | 32 +++ board/broadcom/bcm968360bg/Kconfig | 17 -- board/broadcom/bcm968360bg/MAINTAINERS | 6 - board/broadcom/bcm968360bg/Makefile | 3 - board/broadcom/bcm968360bg/bcm968360bg.c | 62 ------ board/broadcom/bcmbca/Kconfig | 7 + configs/bcm968360bg_ram_defconfig | 10 +- configs/bcm96856_defconfig | 23 +++ drivers/gpio/Kconfig | 2 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/spi/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- include/configs/bcm96856.h | 15 ++ include/configs/broadcom_bcm968360bg.h | 32 --- 26 files changed, 408 insertions(+), 360 deletions(-) delete mode 100644 arch/arm/dts/bcm68360.dtsi create mode 100644 arch/arm/dts/bcm6856.dtsi create mode 100644 arch/arm/dts/bcm96856.dts create mode 100644 arch/arm/mach-bcmbca/bcm6856/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6856/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm6856/mmu_table.c delete mode 100644 board/broadcom/bcm968360bg/Kconfig delete mode 100644 board/broadcom/bcm968360bg/MAINTAINERS delete mode 100644 board/broadcom/bcm968360bg/Makefile delete mode 100644 board/broadcom/bcm968360bg/bcm968360bg.c create mode 100644 configs/bcm96856_defconfig create mode 100644 include/configs/bcm96856.h delete mode 100644 include/configs/broadcom_bcm968360bg.h
Signature · 1 line
2.37.1
William Zhang
maintainerPATCH v2 1/3 arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
---
(no changes since v1)
MAINTAINERS | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm6856.dtsi | 103 +++++++++++++++++++++++ arch/arm/dts/bcm96856.dts | 30 +++++++ arch/arm/mach-bcmbca/Kconfig | 8 ++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6856/Kconfig | 17 ++++ arch/arm/mach-bcmbca/bcm6856/Makefile | 5 ++ arch/arm/mach-bcmbca/bcm6856/mmu_table.c | 32 +++++++ board/broadcom/bcmbca/Kconfig | 7 ++ configs/bcm96856_defconfig | 23 +++++ include/configs/bcm96856.h | 11 +++ 12 files changed, 240 insertions(+) create mode 100644 arch/arm/dts/bcm6856.dtsi create mode 100644 arch/arm/dts/bcm96856.dts create mode 100644 arch/arm/mach-bcmbca/bcm6856/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6856/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm6856/mmu_table.c create mode 100644 configs/bcm96856_defconfig create mode 100644 include/configs/bcm96856.h
MAINTAINERS +1 -0
@@ -230,6 +230,7 @@ N: bcm[9]?63178 N: bcm[9]?6756 N: bcm[9]?6813 N: bcm[9]?6846 +N: bcm[9]?6856 N: bcm[9]?6878 ARM BROADCOM BCMSTB
arch/arm/dts/Makefile +2 -0
@@ -1182,6 +1182,8 @@ dtb-$(CONFIG_BCM6813) += \ bcm96813.dtb dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb +dtb-$(CONFIG_BCM6856) += \ + bcm96856.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtb
arch/arm/dts/bcm6856.dtsi new file +103 -0
103 lines not on this page · raw message
arch/arm/dts/bcm96856.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6856.dtsi" + +/ { + model = "Broadcom BCM96856 Reference Board"; + compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +};
arch/arm/mach-bcmbca/Kconfig +8 -0
@@ -83,6 +83,13 @@ config BCM6846 select DM_SERIAL select BCM6345_SERIAL +config BCM6856 + bool "Support for Broadcom 6856 Family" + select ARM64 + select SYS_ARCH_TIMER + select DM_SERIAL + select BCM6345_SERIAL + config BCM6878 bool "Support for Broadcom 6878 Family" select SYS_ARCH_TIMER
@@ -101,6 +108,7 @@ source "arch/arm/mach-bcmbca/bcm63178/Kconfig" source "arch/arm/mach-bcmbca/bcm6756/Kconfig" source "arch/arm/mach-bcmbca/bcm6813/Kconfig" source "arch/arm/mach-bcmbca/bcm6846/Kconfig" +source "arch/arm/mach-bcmbca/bcm6856/Kconfig" source "arch/arm/mach-bcmbca/bcm6878/Kconfig" endif
arch/arm/mach-bcmbca/Makefile +1 -0
@@ -14,4 +14,5 @@ obj-$(CONFIG_BCM63178) += bcm63178/ obj-$(CONFIG_BCM6756) += bcm6756/ obj-$(CONFIG_BCM6813) += bcm6813/ obj-$(CONFIG_BCM6846) += bcm6846/ +obj-$(CONFIG_BCM6856) += bcm6856/ obj-$(CONFIG_BCM6878) += bcm6878/
arch/arm/mach-bcmbca/bcm6856/Kconfig new file +17 -0
@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM6856 + +config TARGET_BCM96856 + bool "Broadcom 6856 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm6856" + +source "board/broadcom/bcmbca/Kconfig" + +endif
arch/arm/mach-bcmbca/bcm6856/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj-y += mmu_table.o
arch/arm/mach-bcmbca/bcm6856/mmu_table.c new file +32 -0
@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2022 Broadcom Ltd. +*/ +#include <common.h> +#include <asm/armv8/mmu.h> +#include <linux/sizes.h> + +static struct mm_region bcm96856_mem_map[] = { + { + .virt =0x00000000UL , + .phys =0x00000000UL , + .size =1UL *SZ_1G , + .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | +PTE_BLOCK_INNER_SHARE + }, + { +/* SoC peripheral */ + .virt =0xff800000UL , + .phys =0xff800000UL , + .size =0x100000 , + .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | +PTE_BLOCK_NON_SHARE | +PTE_BLOCK_PXN |PTE_BLOCK_UXN + }, + { +/* List terminator */ +0 , + } +}; + +struct mm_region *mem_map = bcm96856_mem_map;
board/broadcom/bcmbca/Kconfig +7 -0
@@ -86,6 +86,13 @@ config SYS_CONFIG_NAME endif +if TARGET_BCM96856 + +config SYS_CONFIG_NAME + default "bcm96856" + +endif + if TARGET_BCM96878 config SYS_CONFIG_NAME
configs/bcm96856_defconfig new file +23 -0
@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM6856=y +CONFIG_TARGET_BCM96856=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_DEFAULT_DEVICE_TREE="bcm96856" +CONFIG_IDENT_STRING=" Broadcom BCM6856" +CONFIG_SYS_LOAD_ADDR=0x01000000 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=y
include/configs/bcm96856.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM96856_H +#define __BCM96856_H + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#endif
Signature · 1 line
2.37.1
Re: [PATCH v2 1/3] arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA
Hi William,
Le 15/08/2022 à 20:55, William Zhang a écrit :
Quoted 10 lines
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under
CONFIG_BCM6856chip config andCONFIG_ARCH_BCMBCAplatform config.This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.
Quoted 4 lines
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
Signed-off-by William Zhang <[email protected]>
Quoted 367 lines
---
(no changes since v1)
MAINTAINERS | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm6856.dtsi | 103 +++++++++++++++++++++++ arch/arm/dts/bcm96856.dts | 30 +++++++ arch/arm/mach-bcmbca/Kconfig | 8 ++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6856/Kconfig | 17 ++++ arch/arm/mach-bcmbca/bcm6856/Makefile | 5 ++ arch/arm/mach-bcmbca/bcm6856/mmu_table.c | 32 +++++++ board/broadcom/bcmbca/Kconfig | 7 ++ configs/bcm96856_defconfig | 23 +++++ include/configs/bcm96856.h | 11 +++ 12 files changed, 240 insertions(+)create mode 100644
arch/arm/dts/bcm6856.dtsicreate mode 100644arch/arm/dts/bcm96856.dtscreate mode 100644arch/arm/mach-bcmbca/bcm6856/Kconfigcreate mode 100644arch/arm/mach-bcmbca/bcm6856/Makefilecreate mode 100644arch/arm/mach-bcmbca/bcm6856/mmu_table.ccreate mode 100644 configs/bcm96856_defconfig create mode 100644include/configs/bcm96856.hMAINTAINERS +1
-0@@ -230,6 +230,7 @@ N: bcm[9]?63178 N: bcm[9]?6756 N: bcm[9]?6813 N: bcm[9]?6846 +N: bcm[9]?6856 N: bcm[9]?6878 ARM BROADCOM BCMSTBarch/arm/dts/Makefile +2
-0@@ -1182,6 +1182,8 @@ dtb-$(CONFIG_BCM6813) += \ bcm96813.dtb dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb +dtb-$(CONFIG_BCM6856) += \ + bcm96856.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtbarch/arm/dts/bcm6856.dtsi new file +103
-0@@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6856", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +};arch/arm/dts/bcm96856.dts new file +30
-0@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6856.dtsi" + +/ { + model = "Broadcom BCM96856 Reference Board"; + compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +};arch/arm/mach-bcmbca/Kconfig +8
-0@@ -83,6 +83,13 @@ config BCM6846 select DM_SERIAL select BCM6345_SERIAL +config BCM6856 + bool "Support for Broadcom 6856 Family" + select ARM64 + select SYS_ARCH_TIMER + select DM_SERIAL + select BCM6345_SERIAL + config BCM6878 bool "Support for Broadcom 6878 Family" select SYS_ARCH_TIMER@@ -101,6 +108,7 @@ source "arch/arm/mach-bcmbca/bcm63178/Kconfig" source "arch/arm/mach-bcmbca/bcm6756/Kconfig" source "arch/arm/mach-bcmbca/bcm6813/Kconfig" source "arch/arm/mach-bcmbca/bcm6846/Kconfig" +source "arch/arm/mach-bcmbca/bcm6856/Kconfig" source "arch/arm/mach-bcmbca/bcm6878/Kconfig" endifarch/arm/mach-bcmbca/Makefile +1
-0@@ -14,4 +14,5 @@ obj-$(CONFIG_BCM63178) += bcm63178/ obj-$(CONFIG_BCM6756) += bcm6756/ obj-$(CONFIG_BCM6813) += bcm6813/ obj-$(CONFIG_BCM6846) += bcm6846/ +obj-$(CONFIG_BCM6856) += bcm6856/ obj-$(CONFIG_BCM6878) += bcm6878/arch/arm/mach-bcmbca/bcm6856/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM6856 + +config TARGET_BCM96856 + bool "Broadcom 6856 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm6856" + +source "board/broadcom/bcmbca/Kconfig" + +endifarch/arm/mach-bcmbca/bcm6856/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj-y += mmu_table.oarch/arm/mach-bcmbca/bcm6856/mmu_table.c new file +32
-0@@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2022 Broadcom Ltd. +*/ +#include <common.h> +#include <asm/armv8/mmu.h> +#include <linux/sizes.h> + +static struct mm_region bcm96856_mem_map[] = { + { + .virt =0x00000000UL , + .phys =0x00000000UL , + .size =1UL *SZ_1G , + .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | +PTE_BLOCK_INNER_SHARE + }, + { +/* SoC peripheral */ + .virt =0xff800000UL , + .phys =0xff800000UL , + .size =0x100000 , + .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | +PTE_BLOCK_NON_SHARE | +PTE_BLOCK_PXN |PTE_BLOCK_UXN + }, + { +/* List terminator */ +0 , + } +}; + +struct mm_region *mem_map = bcm96856_mem_map;board/broadcom/bcmbca/Kconfig +7
-0@@ -86,6 +86,13 @@ config SYS_CONFIG_NAME endif +if TARGET_BCM96856 + +config SYS_CONFIG_NAME + default "bcm96856" + +endif + if TARGET_BCM96878 config SYS_CONFIG_NAMEconfigs/bcm96856_defconfig new file +23
-0@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM6856=y +CONFIG_TARGET_BCM96856=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_DEFAULT_DEVICE_TREE="bcm96856" +CONFIG_IDENT_STRING=" Broadcom BCM6856" +CONFIG_SYS_LOAD_ADDR=0x01000000 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=yinclude/configs/bcm96856.h new file +11
-0@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM96856_H +#define __BCM96856_H + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#endif
William Zhang
maintainerPATCH v2 2/3 arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360
In reply to William ZhangBCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the original ARCH_BCM68360 support and migrate its configuration and dts settings. This includes:
- Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder.
- Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string.
- Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file.
---
Changes in v2:
- Bring Philippe Reynes copyright tag from 68360 dts to 6856 dts
arch/arm/Kconfig | 7 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm68360.dtsi | 217 ----------------------- arch/arm/dts/bcm6856.dtsi | 150 ++++++++++++++++ arch/arm/dts/bcm968360bg.dts | 6 +- board/broadcom/bcm968360bg/Kconfig | 17 -- board/broadcom/bcm968360bg/MAINTAINERS | 6 - board/broadcom/bcm968360bg/Makefile | 3 - board/broadcom/bcm968360bg/bcm968360bg.c | 62 ------- configs/bcm968360bg_ram_defconfig | 10 +- include/configs/bcm96856.h | 4 + include/configs/broadcom_bcm968360bg.h | 32 ---- 12 files changed, 164 insertions(+), 356 deletions(-) delete mode 100644 arch/arm/dts/bcm68360.dtsi delete mode 100644 board/broadcom/bcm968360bg/Kconfig delete mode 100644 board/broadcom/bcm968360bg/MAINTAINERS delete mode 100644 board/broadcom/bcm968360bg/Makefile delete mode 100644 board/broadcom/bcm968360bg/bcm968360bg.c delete mode 100644 include/configs/broadcom_bcm968360bg.h
arch/arm/Kconfig +0 -7
@@ -672,12 +672,6 @@ config ARCH_BCM6753 select OF_CONTROL imply CMD_DM -config ARCH_BCM68360 - bool "Broadcom BCM68360 family" - select DM - select OF_CONTROL - imply CMD_DM - config ARCH_BCM6858 bool "Broadcom BCM6858 family" select DM
@@ -2280,7 +2274,6 @@ source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm96753ref/Kconfig" -source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig"
arch/arm/dts/Makefile +2 -4
@@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-4-b.dtb -dtb-$(CONFIG_ARCH_BCM68360) += \ - bcm968360bg.dtb - dtb-$(CONFIG_ARCH_BCM6753) += \ bcm96753ref.dtb
@@ -1183,7 +1180,8 @@ dtb-$(CONFIG_BCM6813) += \ dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb dtb-$(CONFIG_BCM6856) += \ - bcm96856.dtb + bcm96856.dtb \ + bcm968360bg.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtb
arch/arm/dts/bcm68360.dtsi deleted +0 -217
217 lines not on this page · raw message
arch/arm/dts/bcm6856.dtsi +150 -0
177 lines not on this page · raw message
arch/arm/dts/bcm968360bg.dts +3 -3
@@ -5,11 +5,11 @@ /dts-v1/; -#include "bcm68360.dtsi" +#include "bcm6856.dtsi" / { - model = "Broadcom bcm68360bg"; - compatible = "broadcom,bcm68360bg", "brcm,bcm68360"; + model = "Broadcom BCM968360BG Reference Board"; + compatible = "brcm,bcm968360bg", "brcm,bcm6856", "brcm,bcmbca"; aliases { serial0 = &uart0;
board/broadcom/bcm968360bg/Kconfig deleted +0 -17
@@ -1,17 +0,0 @@ -if ARCH_BCM68360 - -config SYS_VENDOR - default "broadcom" - -config SYS_BOARD - default "bcm968360bg" - -config SYS_CONFIG_NAME - default "broadcom_bcm968360bg" - -endif - -config TARGET_BCM968360BG - bool "Support Broadcom bcm968360bg" - depends on ARCH_BCM68360 - select ARM64
board/broadcom/bcm968360bg/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -BCM968360BG BOARD -M: Philippe Reynes <[email protected]> -S: Maintained -F: board/broadcom/bcm968360bg -F: include/configs/broadcom_bcm968360bg.h -F: configs/bcm968360bg_ram_defconfig
board/broadcom/bcm968360bg/Makefile deleted +0 -3
@@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += bcm968360bg.o
board/broadcom/bcm968360bg/bcm968360bg.c deleted +0 -62
62 lines not on this page · raw message
configs/bcm968360bg_ram_defconfig +5 -5
@@ -1,15 +1,17 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_ARCH_BCM68360=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y CONFIG_SYS_TEXT_BASE=0x10000000 CONFIG_SYS_MALLOC_LEN=0x100000 CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_BCM6856=y +CONFIG_TARGET_BCM96856=y +CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="bcm968360bg" CONFIG_SYS_LOAD_ADDR=0x10000000 -CONFIG_TARGET_BCM968360BG=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000
@@ -52,9 +54,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_CONS_INDEX=0 -CONFIG_DM_SERIAL=y CONFIG_SERIAL_SEARCH_ALL=y -CONFIG_BCM6345_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_BCM63XX_HSSPI=y
include/configs/bcm96856.h +4 -0
@@ -8,4 +8,8 @@#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ +#endif
include/configs/broadcom_bcm968360bg.h deleted +0 -32
@@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2020 Philippe Reynes <[email protected]> -*/ - -#include <linux/sizes.h> - -/* -* common -*/ - -/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ - 230400, 500000, 1500000 } -/* Memory usage */ - -/* -* 6858 -*/ - -/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* U-Boot */ - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - -/* -* 968360bg -*/
Signature · 1 line
2.37.1
Re: [PATCH v2 2/3] arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360
Hi William,
Le 15/08/2022 à 20:55, William Zhang a écrit :
Quoted 11 lines
BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under
CONFIG_ARCH_BCMBCAandCONFIG_BCM6856, remove the originalARCH_BCM68360support and migrate its configuration and dts settings. This includes:
- Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder.
- Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string.
- Mergebroadcom_bcm968360bg.hsetting to the newbcm96856.hfile.Signed-off-by William Zhang <[email protected]>
Quoted 700 lines
---
Changes in v2:
- Bring Philippe Reynes copyright tag from 68360 dts to 6856 dtsarch/arm/Kconfig | 7 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm68360.dtsi | 217 ----------------------- arch/arm/dts/bcm6856.dtsi | 150 ++++++++++++++++ arch/arm/dts/bcm968360bg.dts | 6 +- board/broadcom/bcm968360bg/Kconfig | 17 -- board/broadcom/bcm968360bg/MAINTAINERS | 6 - board/broadcom/bcm968360bg/Makefile | 3 - board/broadcom/bcm968360bg/bcm968360bg.c | 62 ------- configs/bcm968360bg_ram_defconfig | 10 +- include/configs/bcm96856.h | 4 + include/configs/broadcom_bcm968360bg.h | 32 ---- 12 files changed, 164 insertions(+), 356 deletions(-)delete mode 100644
arch/arm/dts/bcm68360.dtsidelete mode 100644 board/broadcom/bcm968360bg/Kconfig delete mode 100644 board/broadcom/bcm968360bg/MAINTAINERS delete mode 100644 board/broadcom/bcm968360bg/Makefile delete mode 100644board/broadcom/bcm968360bg/bcm968360bg.cdelete mode 100644include/configs/broadcom_bcm968360bg.harch/arm/Kconfig +0
-7@@ -672,12 +672,6 @@ config ARCH_BCM6753 select OF_CONTROL imply CMD_DM -config ARCH_BCM68360 - bool "Broadcom BCM68360 family" - select DM - select OF_CONTROL - imply CMD_DM - config ARCH_BCM6858 bool "Broadcom BCM6858 family" select DM@@ -2280,7 +2274,6 @@ source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm96753ref/Kconfig" -source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig"arch/arm/dts/Makefile +2
-4@@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-4-b.dtb -dtb-$(CONFIG_ARCH_BCM68360) += \ - bcm968360bg.dtb - dtb-$(CONFIG_ARCH_BCM6753) += \ bcm96753ref.dtb@@ -1183,7 +1180,8 @@ dtb-$(CONFIG_BCM6813) += \ dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb dtb-$(CONFIG_BCM6856) += \ - bcm96856.dtb + bcm96856.dtb \ + bcm968360bg.dtb dtb-$(CONFIG_BCM6878) += \ bcm96878.dtbarch/arm/dts/bcm68360.dtsi deleted +0
-217@@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2020 Philippe Reynes <[email protected]> - */ - -#include "skeleton64.dtsi" - -/ { - compatible = "brcm,bcm68360"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - spi0 = &hsspi; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - u-boot,dm-pre-reloc; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - l2: l2-cache0 { - compatible = "cache"; - u-boot,dm-pre-reloc; - }; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - u-boot,dm-pre-reloc; - - periph_osc: periph-osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - u-boot,dm-pre-reloc; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_osc>; - clock-mult = <2>; - clock-div = <1>; - }; - - refclk50mhz: refclk50mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; - }; - - ubus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - u-boot,dm-pre-reloc; - - wdt1: watchdog@ff800480 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x0 0xff800480 0x0 0x14>; - clocks = <&refclk50mhz>; - }; - - wdt2: watchdog@ff8004c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x0 0xff8004c0 0x0 0x14>; - clocks = <&refclk50mhz>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - uart0: serial@ff800640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x0 0xff800640 0x0 0x18>; - clocks = <&periph_osc>; - - status = "disabled"; - }; - - leds: led-controller@ff800800 { - compatible = "brcm,bcm6858-leds"; - reg = <0x0 0xff800800 0x0 0xe4>; - - status = "disabled"; - }; - - gpio0: gpio-controller@0xff800500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800500 0x0 0x4>, - <0x0 0xff800520 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@0xff800504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800504 0x0 0x4>, - <0x0 0xff800524 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@0xff800508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800508 0x0 0x4>, - <0x0 0xff800528 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@0xff80050c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff80050c 0x0 0x4>, - <0x0 0xff80052c 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@0xff800510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800510 0x0 0x4>, - <0x0 0xff800530 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@0xff800514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800514 0x0 0x4>, - <0x0 0xff800534 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@0xff800518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff800518 0x0 0x4>, - <0x0 0xff800538 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@0xff80051c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x0 0xff80051c 0x0 0x4>, - <0x0 0xff80053c 0x0 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - hsspi: spi-controller@ff801000 { - compatible = "brcm,bcm6328-hsspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0xff801000 0x0 0x600>; - clocks = <&hsspi_pll>, <&hsspi_pll>; - clock-names = "hsspi", "pll"; - spi-max-frequency = <100000000>; - num-cs = <8>; - - status = "disabled"; - }; - - nand: nand-controller@ff801800 { - compatible = "brcm,nand-bcm68360", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x0 0xff801800 0x0 0x180>, - <0x0 0xff802000 0x0 0x10>, - <0x0 0xff801c00 0x0 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - }; -};arch/arm/dts/bcm6856.dtsi +150
-0@@ -1,5 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* + * Copyright (C) 2020 Philippe Reynes <[email protected]> * Copyright 2022 Broadcom Ltd. */@@ -54,11 +55,29 @@ }; clocks: clocks { + u-boot,dm-pre-reloc; + periph_clk:periph-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-mult = <2>; + clock-div = <1>; + }; + + wdt_clk: wdt-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; }; psci {@@ -90,6 +109,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + u-boot,dm-pre-reloc; uart0: serial@640 { compatible = "brcm,bcm6345-uart";@@ -99,5 +119,135 @@ clock-names = "refclk"; status = "disabled"; }; + + wdt1: watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x14>; + clocks = <&wdt_clk>; + }; + + wdt2: watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x14>; + clocks = <&wdt_clk>; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdt1>; + }; + + leds: led-controller@800 { + compatible = "brcm,bcm6858-leds"; + reg = <0x800 0xe4>; + + status = "disabled"; + }; + + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x4>, + <0x520 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio1: gpio-controller@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x4>, + <0x524 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio2: gpio-controller@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x4>, + <0x528 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio3: gpio-controller@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x4>, + <0x52c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio4: gpio-controller@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x4>, + <0x530 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio5: gpio-controller@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x4>, + <0x534 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio6: gpio-controller@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x4>, + <0x538 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio7: gpio-controller@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x4>, + <0x53c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + hsspi: spi-controller@1000 { + compatible = "brcm,bcm6328-hsspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1000 0x600>; + clocks = <&hsspi_pll>, <&hsspi_pll>; + clock-names = "hsspi", "pll"; + spi-max-frequency = <100000000>; + num-cs = <8>; + + status = "disabled"; + }; + + nand: nand-controller@1800 { + compatible = "brcm,nand-bcm68360", + "brcm,brcmnand-v5.0", + "brcm,brcmnand"; + reg-names = "nand", "nand-int-base", "nand-cache"; + reg = <0x1800 0x180>, + <0x2000 0x10>, + <0x1c00 0x200>; + parameter-page-big-endian = <0>; + + status = "disabled"; + }; }; };arch/arm/dts/bcm968360bg.dts +3
-3@@ -5,11 +5,11 @@ /dts-v1/; -#include "bcm68360.dtsi" +#include "bcm6856.dtsi" / { - model = "Broadcom bcm68360bg"; - compatible = "broadcom,bcm68360bg", "brcm,bcm68360"; + model = "Broadcom BCM968360BG Reference Board"; + compatible = "brcm,bcm968360bg", "brcm,bcm6856", "brcm,bcmbca"; aliases { serial0 = &uart0;board/broadcom/bcm968360bg/Kconfig deleted +0
-17@@ -1,17 +0,0 @@ -if ARCH_BCM68360 - -config SYS_VENDOR - default "broadcom" - -config SYS_BOARD - default "bcm968360bg" - -config SYS_CONFIG_NAME - default "broadcom_bcm968360bg" - -endif - -config TARGET_BCM968360BG - bool "Support Broadcom bcm968360bg" - depends on ARCH_BCM68360 - select ARM64board/broadcom/bcm968360bg/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -BCM968360BG BOARD -M: Philippe Reynes <[email protected]> -S: Maintained -F: board/broadcom/bcm968360bg -F: include/configs/broadcom_bcm968360bg.h -F: configs/bcm968360bg_ram_defconfigboard/broadcom/bcm968360bg/Makefile deleted +0
-3@@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += bcm968360bg.oboard/broadcom/bcm968360bg/bcm968360bg.c deleted +0
-62@@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (C) 2020 Philippe Reynes <[email protected]> -*/ - -#include <common.h> -#include <fdtdec.h> -#include <init.h> -#include <linux/io.h> - -#ifdef CONFIG_ARM64 -#include <asm/armv8/mmu.h> - -static struct mm_region broadcom_bcm968360bg_mem_map[] = { - { -/* RAM */ - .virt =0x00000000UL , - .phys =0x00000000UL , - .size =8UL *SZ_1G , - .attrs =PTE_BLOCK_MEMTYPE (MT_NORMAL ) | -PTE_BLOCK_INNER_SHARE - }, { -/* SoC */ - .virt =0x80000000UL , - .phys =0x80000000UL , - .size =0xff80000000UL , - .attrs =PTE_BLOCK_MEMTYPE (MT_DEVICE_NGNRNE ) | -PTE_BLOCK_NON_SHARE | -PTE_BLOCK_PXN |PTE_BLOCK_UXN - }, { -/* List terminator */ -0 , - } -}; - -struct mm_region *mem_map = broadcom_bcm968360bg_mem_map; -#endif - -int board_init (void ) -{ -return 0 ; -} - -int dram_init (void ) -{ -if (fdtdec_setup_mem_size_base () !=0 ) -printf ("fdtdec_setup_mem_size_base() has failed\n" ); - -return 0 ; -} - -int dram_init_banksize (void ) -{ -fdtdec_setup_memory_banksize (); - -return 0 ; -} - -int print_cpuinfo (void ) -{ -return 0 ; -}configs/bcm968360bg_ram_defconfig +5
-5@@ -1,15 +1,17 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_ARCH_BCM68360=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y CONFIG_SYS_TEXT_BASE=0x10000000 CONFIG_SYS_MALLOC_LEN=0x100000 CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_NR_DRAM_BANKS=1 +CONFIG_BCM6856=y +CONFIG_TARGET_BCM96856=y +CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="bcm968360bg" CONFIG_SYS_LOAD_ADDR=0x10000000 -CONFIG_TARGET_BCM968360BG=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000@@ -52,9 +54,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_CONS_INDEX=0 -CONFIG_DM_SERIAL=y CONFIG_SERIAL_SEARCH_ALL=y -CONFIG_BCM6345_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_BCM63XX_HSSPI=yinclude/configs/bcm96856.h +4
-0@@ -8,4 +8,8 @@#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ +#endif include/configs/broadcom_bcm968360bg.h deleted +0
-32@@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2020 Philippe Reynes <[email protected]> -*/ - -#include <linux/sizes.h> - -/* -* common -*/ - -/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ - 230400, 500000, 1500000 } -/* Memory usage */ - -/* -* 6858 -*/ - -/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* U-Boot */ - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - -/* -* 968360bg -*/
William Zhang
maintainerPATCH v2 3/3 arm: bcmbca: make bcm68360 driver depending on CONFIG_BCM6856
In reply to William ZhangAs CONFIG_ARCH_BCM68360 is replaced with CONFIG_BCM6856, update the driver Kconfig to use the new config symbol
---
(no changes since v1)
drivers/gpio/Kconfig | 2 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/spi/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpio/Kconfig +1 -1
@@ -110,7 +110,7 @@ config BCM2835_GPIO config BCM6345_GPIO bool "BCM6345 GPIO driver" - depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM68360 || \ + depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \ ARCH_BCM6858 || BCM63158 || \ ARCH_BCM6753) help
drivers/led/Kconfig +1 -1
@@ -37,7 +37,7 @@ config LED_BCM6753 config LED_BCM6858 bool "LED Support for BCM6858" - depends on LED && (ARCH_BCM68360 || ARCH_BCM6858 || BCM63158) + depends on LED && (BCM6856 || ARCH_BCM6858 || BCM63158) help This option enables support for LEDs connected to the BCM6858 HW has blinking capabilities and up to 32 LEDs can be controlled.
drivers/mtd/nand/raw/Kconfig +1 -1
@@ -103,7 +103,7 @@ config NAND_BRCMNAND_6753 config NAND_BRCMNAND_68360 bool "Support Broadcom NAND controller on bcm68360" - depends on NAND_BRCMNAND && ARCH_BCM68360 + depends on NAND_BRCMNAND && BCM6856 help Enable support for broadcom nand driver on bcm68360.
drivers/spi/Kconfig +1 -1
@@ -91,7 +91,7 @@ config ATMEL_SPI config BCM63XX_HSSPI bool "BCM63XX HSSPI driver" - depends on (ARCH_BMIPS || ARCH_BCM68360 || \ + depends on (ARCH_BMIPS || BCM6856 || \ ARCH_BCM6858 || BCM63158) help Enable the BCM6328 HSSPI driver. This driver can be used to
drivers/watchdog/Kconfig +1 -1
@@ -128,7 +128,7 @@ config WDT_AT91 config WDT_BCM6345 bool "BCM6345 watchdog timer support" - depends on WDT && (ARCH_BMIPS || ARCH_BCM68360 || \ + depends on WDT && (ARCH_BMIPS || BCM6856 || \ ARCH_BCM6858 || BCM63158 || \ ARCH_BCM6753) help
Signature · 1 line
2.37.1
Re: [PATCH v2 3/3] arm: bcmbca: make bcm68360 driver depending on CONFIG_BCM6856
Hi William,
Le 15/08/2022 à 20:55, William Zhang a écrit :
Quoted 4 lines
As
CONFIG_ARCH_BCM68360is replaced withCONFIG_BCM6856, update the driverKconfigto use the new config symbolSigned-off-by William Zhang <[email protected]>
Quoted 77 lines
---
(no changes since v1)
drivers/gpio/Kconfig | 2 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/spi/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)drivers/gpio/Kconfig +1
-1@@ -110,7 +110,7 @@ config BCM2835_GPIO config BCM6345_GPIO bool "BCM6345 GPIO driver" - depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM68360 || \ + depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \ ARCH_BCM6858 || BCM63158 || \ ARCH_BCM6753) helpdrivers/led/Kconfig +1
-1@@ -37,7 +37,7 @@ config LED_BCM6753 config LED_BCM6858 bool "LED Support for BCM6858" - depends on LED && (ARCH_BCM68360 || ARCH_BCM6858 || BCM63158) + depends on LED && (BCM6856 || ARCH_BCM6858 || BCM63158) help This option enables support for LEDs connected to the BCM6858 HW has blinking capabilities and up to 32 LEDs can be controlled.drivers/mtd/nand/raw/Kconfig +1
-1@@ -103,7 +103,7 @@ config NAND_BRCMNAND_6753 config NAND_BRCMNAND_68360 bool "Support Broadcom NAND controller on bcm68360" - depends on NAND_BRCMNAND && ARCH_BCM68360 + depends on NAND_BRCMNAND && BCM6856 help Enable support for broadcom nand driver on bcm68360.drivers/spi/Kconfig +1
-1@@ -91,7 +91,7 @@ config ATMEL_SPI config BCM63XX_HSSPI bool "BCM63XX HSSPI driver" - depends on (ARCH_BMIPS || ARCH_BCM68360 || \ + depends on (ARCH_BMIPS || BCM6856 || \ ARCH_BCM6858 || BCM63158) help Enable the BCM6328 HSSPI driver. This driver can be used todrivers/watchdog/Kconfig +1
-1@@ -128,7 +128,7 @@ config WDT_AT91 config WDT_BCM6345 bool "BCM6345 watchdog timer support" - depends on WDT && (ARCH_BMIPS || ARCH_BCM68360 || \ + depends on WDT && (ARCH_BMIPS || BCM6856 || \ ARCH_BCM6858 || BCM63158 || \ ARCH_BCM6753) help