counter: interrupt-cnt: Implement watch_validate callback
Subsystems (3)
PATCH 1/1 counter: interrupt-cnt: Implement watch_validate callback
The interrupt-cnt counter driver only pushes one type of event on only one channel: COUNTER_EVENT_CHANGE_OF_STATE on channel 0. The interrupt_cnt_watch_validate() watch_valid callback is implemented to ensure watch configurations are valid for this driver.
Cc Oleksij Rempel <[email protected]>
Cc Pengutronix Kernel Team <[email protected]>
Signed-off-by William Breathitt Gray <[email protected]>
--- drivers/counter/interrupt-cnt.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/counter/interrupt-cnt.c +11 -0
@@ -139,12 +139,23 @@ static int interrupt_cnt_signal_read(struct counter_device *counter,return 0 ; } +static int interrupt_cnt_watch_validate (struct counter_device *counter, +const struct counter_watch *watch) +{ +if (watch->channel !=0 || + watch->event !=COUNTER_EVENT_CHANGE_OF_STATE ) +return -EINVAL ; + +return 0 ; +} +static const struct counter_ops interrupt_cnt_ops = { .action_read = interrupt_cnt_action_read, .count_read = interrupt_cnt_read, .count_write = interrupt_cnt_write, .function_read = interrupt_cnt_function_read, .signal_read = interrupt_cnt_signal_read, + .watch_validate = interrupt_cnt_watch_validate, };static int interrupt_cnt_probe (struct platform_device *pdev)
base-commit: 568035b01cfb107af8d2e4bd2fb9aea22cf5b868
Signature · 1 line
2.37.2
Quoted 8 lines · William Breathitt Gray
The interrupt-cnt counter driver only pushes one type of event on only one channel:
COUNTER_EVENT_CHANGE_OF_STATEon channel 0. Theinterrupt_cnt_watch_validate()watch_validcallback is implemented to ensure watch configurations are valid for this driver.Cc Oleksij Rempel <[email protected]>Cc Pengutronix Kernel Team <[email protected]>Signed-off-by William Breathitt Gray <[email protected]>
Applied to counter-next.
William Breathitt Gray