x86/topology: Improve CPUID.1F handling
v2 cover x86/topology: Improve CPUID.1F handling
On Intel AlderLake-N platforms where there are Ecores only, the Ecore Module topology is enumerated via CPUID.1F Module level, which has not been supported by Linux kernel yet.
This exposes two issues in current CPUID.1F handling code.
1. Linux interprets the Module ID bits as package ID and erroneously reports a multi module system as a multi-package system.
2. Linux excludes the unknown Module ID bits from the core ID, and results in duplicate core ID’s shown in a package after the first issue solved.
Plus that, a third problem is observed on Intel Hybrid ADL-S/P platforms. The return value of CPUID.1F SMT level EBX (number of siblings) differs on Pcore CPUs and Ecore CPUs, and results in inconsistent smp_num_siblings value based on the Pcore/Ecore CPU enumeration order. This could bring some potential issues although we have not observed any functionalities issues so far.
This patch series fixes these three problems in CPUID.1F handling code, together with some related fixes and document updates.
thanks,
-rui
---
Changes since V1:
- fix/improve changelog/comment wording issues
- reorder the patches to eliminate bisection breakage window
- add a new patch for coretemp driver variable renaming
- update coretemp driver patch to fix a case of ida_free(&ida, -2)
PATCH v2 1/8 perf/x86/intel/P4: Fix smp_num_siblings usage
smp_num_siblings can be larger than 2.
Any value larger than 1 suggests HT is supported.
--- arch/x86/include/asm/perf_event_p4.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/include/asm/perf_event_p4.h +1 -1
@@ -189,7 +189,7 @@ static inline int p4_ht_active(void)static inline int p4_ht_thread (int cpu) {#ifdef CONFIG_SMP -if (smp_num_siblings ==2 ) +if (smp_num_siblings >1 )return cpu !=cpumask_first (this_cpu_cpumask_var_ptr (cpu_sibling_map));#endif return 0 ;
Signature · 1 line
2.25.1
Re: [PATCH V2 1/8] perf/x86/intel/P4: Fix smp_num_siblings usage
Quoted 3 lines · Zhang Rui
smp_num_siblingscan be larger than 2.Any value larger than 1 suggests HT is supported.
Subject and Changelog are still utterly insane.
Zhang Rui
Reviewed-by Len BrownRe: [PATCH V2 1/8] perf/x86/intel/P4: Fix smp_num_siblings usage
Quoted 6 lines · Peter Zijlstra
Quoted 3 lines · Zhang Rui
smp_num_siblingscan be larger than 2.Any value larger than 1 suggests HT is supported.
Subject and Changelog are still utterly insane.
what about this one, do I need to resend the full series?
thanks,
rui
From 2e368e6afa83cb73e44ac8c3cf8339207097d9e1 Mon Sep 17 00:00:00 2001
From: Zhang Rui <[email protected]>
Date: Tue, 28 Jun 2022 11:02:12 +0800
Subject: [PATCH V3 1/8] perf/x86/intel/P4: unify logic for detecting HT
Any value larger than 1 suggests HT is supported.
Although smp_num_siblings cannot be larger than 2 on P4 platform, it is better to keep this logic consistent across the kernel.
--- arch/x86/include/asm/perf_event_p4.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
(quoted diff) +0 -0
b/arch/x86/include/asm/perf_event_p4.h
index 94de1a05aeba..b14e9a20a7c0 100644
arch/x86/include/asm/perf_event_p4.h +1 -1
@@ -189,7 +189,7 @@ static inline int p4_ht_active(void)static inline int p4_ht_thread (int cpu) {#ifdef CONFIG_SMP -if (smp_num_siblings ==2 ) +if (smp_num_siblings >1 ) return cpu !=
cpumask_first(this_cpu_cpumask_var_ptr(cpu_sibling_map));
#endif
return 0;
Signature · 1 line
2.25.1
Re: [PATCH V2 1/8] perf/x86/intel/P4: Fix smp_num_siblings usage
Quoted 18 lines · Zhang Rui
Quoted 6 lines · Peter Zijlstra
Quoted 3 lines · Zhang Rui
smp_num_siblingscan be larger than 2.Any value larger than 1 suggests HT is supported.
Subject and Changelog are still utterly insane.
what about this one, do I need to resend the full series?
thanks,
ruiFrom
2e368e6afa83cb73e44ac8c3cf8339207097d9e1Mon Sep 17 00:00:00 2001
From: Zhang Rui <[email protected]>
Date: Tue, 28 Jun 2022 11:02:12 +0800
Subject: [PATCH V3 1/8] perf/x86/intel/P4: unify logic for detecting HT
Quoted 7 lines
Any value larger than 1 suggests HT is supported.
Although
smp_num_siblingscannot be larger than 2 on P4 platform, it is better to keep this logic consistent across the kernel.Reviewed-by Len Brown <[email protected]>Signed-off-by Zhang Rui <[email protected]>
Yes that works for me; thanks!
PATCH v2 2/8 hwmon/coretemp: Rename indx to index
In reply to Zhang RuiUse variable name 'index' instead of 'indx' for the index in the core_data[] array.
--- drivers/hwmon/coretemp.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/hwmon/coretemp.c +9 -9
@@ -515,15 +515,15 @@ coretemp_add_core(struct platform_device *pdev, unsigned int cpu, int pkg_flag)dev_err (&pdev->dev,"Adding Core %u failed\n" , cpu); } -static void coretemp_remove_core (struct platform_data *pdata,int indx) +static void coretemp_remove_core (struct platform_data *pdata,int index) { -struct temp_data *tdata = pdata->core_data[indx]; +struct temp_data *tdata = pdata->core_data[index];/* Remove the sysfs attributes */ sysfs_remove_group (&pdata->hwmon_dev->kobj, &tdata->attr_group); -kfree (pdata->core_data[indx]); - pdata->core_data[indx] =NULL ; +kfree (pdata->core_data[index]); + pdata->core_data[index] =NULL ; }static int coretemp_probe (struct platform_device *pdev)
@@ -647,7 +647,7 @@ static int coretemp_cpu_offline(unsigned int cpu)struct platform_device *pdev =coretemp_get_pdev (cpu);struct platform_data *pd;struct temp_data *tdata; -int indx, target; +int index, target;/* * Don't execute this on suspend as the device remove locks
@@ -661,12 +661,12 @@ static int coretemp_cpu_offline(unsigned int cpu)return 0 ;/* The core id is too big, just return */ - indx =TO_ATTR_NO (cpu); -if (indx >MAX_CORE_DATA -1 ) + index =TO_ATTR_NO (cpu); +if (index >MAX_CORE_DATA -1 )return 0 ; pd =platform_get_drvdata (pdev); - tdata = pd->core_data[indx]; + tdata = pd->core_data[index];cpumask_clear_cpu (cpu, &pd->cpumask);
@@ -677,7 +677,7 @@ static int coretemp_cpu_offline(unsigned int cpu)*/ target =cpumask_any_and (&pd->cpumask,topology_sibling_cpumask (cpu));if (target >= nr_cpu_ids) { -coretemp_remove_core (pd, indx); +coretemp_remove_core (pd, index); }else if (tdata && tdata->cpu == cpu) {mutex_lock (&tdata->update_lock); tdata->cpu = target;
Signature · 1 line
2.25.1
PATCH v2 3/8 hwmon/coretemp: Handle large core ID value
In reply to Zhang RuiThe coretemp driver supports up to a hard-coded limit of 128 cores.
Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large.
Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's.
--- drivers/hwmon/coretemp.c | 56 +++++++++++++++++++++++++++++----------- 1 file changed, 41 insertions(+), 15 deletions(-)
drivers/hwmon/coretemp.c +41 -15
@@ -46,9 +46,6 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)#define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO) -#define TO_CORE_ID (cpu) (cpu_data(cpu).cpu_core_id) -#define TO_ATTR_NO (cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO) -#ifdef CONFIG_SMP #define for_each_sibling (i, cpu) \ for_each_cpu(i, topology_sibling_cpumask(cpu))
@@ -91,6 +88,8 @@ struct temp_data {struct platform_data {struct device *hwmon_dev;u16 pkg_id; +u16 cpu_map[NUM_REAL_CORES ]; +struct ida ida;struct cpumask cpumask;struct temp_data *core_data[MAX_CORE_DATA ];struct device_attribute name_attr;
@@ -441,7 +440,7 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag)MSR_IA32_THERM_STATUS ; tdata->is_pkg_data = pkg_flag; tdata->cpu = cpu; - tdata->cpu_core_id =TO_CORE_ID (cpu); + tdata->cpu_core_id =topology_core_id (cpu); tdata->attr_size =MAX_CORE_ATTRS ;mutex_init (&tdata->update_lock);return tdata;
@@ -454,7 +453,7 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu,struct platform_data *pdata =platform_get_drvdata (pdev);struct cpuinfo_x86 *c = &cpu_data (cpu);u32 eax, edx; -int err, attr_no; +int err, index, attr_no;/* * Find attr number for sysfs:
@@ -462,14 +461,26 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu,* The attr number is always core id + 2 * The Pkgtemp will always show up as temp1_*, if available */ - attr_no = pkg_flag ?PKG_SYSFS_ATTR_NO :TO_ATTR_NO (cpu); +if (pkg_flag) { + attr_no =PKG_SYSFS_ATTR_NO ; + }else { + index =ida_alloc (&pdata->ida,GFP_KERNEL ); +if (index <0 ) +return index; + pdata->cpu_map[index] =topology_core_id (cpu); + attr_no = index +BASE_SYSFS_ATTR_NO ; + } -if (attr_no >MAX_CORE_DATA -1 ) -return -ERANGE ; +if (attr_no >MAX_CORE_DATA -1 ) { + err = -ERANGE ; + goto ida_free; + } tdata =init_temp_data (cpu, pkg_flag); -if (!tdata) -return -ENOMEM ; +if (!tdata) { + err = -ENOMEM ; + goto ida_free; + }/* Test if we can access the status register */ err =rdmsr_safe_on_cpu (cpu, tdata->status_reg, &eax, &edx);
@@ -505,6 +516,9 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu, exit_free: pdata->core_data[attr_no] =NULL ;kfree (tdata); +ida_free: +if (!pkg_flag) +ida_free (&pdata->ida, index);return err; }
@@ -524,6 +538,9 @@ static void coretemp_remove_core(struct platform_data *pdata, int index)kfree (pdata->core_data[index]); pdata->core_data[index] =NULL ; + +if (index >=BASE_SYSFS_ATTR_NO ) +ida_free (&pdata->ida, index -BASE_SYSFS_ATTR_NO ); }static int coretemp_probe (struct platform_device *pdev)
@@ -537,6 +554,7 @@ static int coretemp_probe(struct platform_device *pdev)return -ENOMEM ; pdata->pkg_id = pdev->id; +ida_init (&pdata->ida);platform_set_drvdata (pdev, pdata); pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME,
@@ -553,6 +571,7 @@ static int coretemp_remove(struct platform_device *pdev)if (pdata->core_data[i])coretemp_remove_core (pdata, i); +ida_destroy (&pdata->ida);return 0 ; }
@@ -647,7 +666,7 @@ static int coretemp_cpu_offline(unsigned int cpu)struct platform_device *pdev =coretemp_get_pdev (cpu);struct platform_data *pd;struct temp_data *tdata; -int index, target; +int i, index =-1 , target;/* * Don't execute this on suspend as the device remove locks
@@ -660,12 +679,19 @@ static int coretemp_cpu_offline(unsigned int cpu)if (!pdev)return 0 ; -/* The core id is too big, just return */ - index =TO_ATTR_NO (cpu); -if (index >MAX_CORE_DATA -1 ) + pd =platform_get_drvdata (pdev); + +for (i =0 ; i <NUM_REAL_CORES ; i++) { +if (pd->cpu_map[i] ==topology_core_id (cpu)) { + index = i +BASE_SYSFS_ATTR_NO ; +break ; + } + } + +/* Too many cores and this core is not populated, just return */ +if (index <0 )return 0 ; - pd =platform_get_drvdata (pdev); tdata = pd->core_data[index];cpumask_clear_cpu (cpu, &pd->cpumask);
Signature · 1 line
2.25.1
Re: [PATCH V2 3/8] hwmon/coretemp: Handle large core ID value
Quoted 6 lines · Zhang Rui
The coretemp driver supports up to a hard-coded limit of 128 cores.
Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large.
Quoted 6 lines
Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's.
Acked-by Len Brown <[email protected]>Signed-off-by Zhang Rui <[email protected]>
Quoted 149 lines
--- drivers/hwmon/coretemp.c | 56 +++++++++++++++++++++++++++++----------- 1 file changed, 41 insertions(+), 15 deletions(-)drivers/hwmon/coretemp.c +41
-15@@ -46,9 +46,6 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)#define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO) -#define TO_CORE_ID (cpu) (cpu_data(cpu).cpu_core_id) -#define TO_ATTR_NO (cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO) -#ifdef CONFIG_SMP #define for_each_sibling (i, cpu) \ for_each_cpu(i, topology_sibling_cpumask(cpu))@@ -91,6 +88,8 @@ struct temp_data {struct platform_data {struct device *hwmon_dev;u16 pkg_id; +u16 cpu_map[NUM_REAL_CORES ]; +struct ida ida;struct cpumask cpumask;struct temp_data *core_data[MAX_CORE_DATA ];struct device_attribute name_attr;@@ -441,7 +440,7 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag)MSR_IA32_THERM_STATUS ; tdata->is_pkg_data = pkg_flag; tdata->cpu = cpu; - tdata->cpu_core_id =TO_CORE_ID (cpu); + tdata->cpu_core_id =topology_core_id (cpu); tdata->attr_size =MAX_CORE_ATTRS ;mutex_init (&tdata->update_lock);return tdata;@@ -454,7 +453,7 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu,struct platform_data *pdata =platform_get_drvdata (pdev);struct cpuinfo_x86 *c = &cpu_data (cpu);u32 eax, edx; -int err, attr_no; +int err, index, attr_no;/* * Find attr number for sysfs: @@ -462,14 +461,26 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu,* The attr number is always core id + 2 * The Pkgtemp will always show up as temp1_*, if available */ - attr_no = pkg_flag ?PKG_SYSFS_ATTR_NO :TO_ATTR_NO (cpu); +if (pkg_flag) { + attr_no =PKG_SYSFS_ATTR_NO ; + }else { + index =ida_alloc (&pdata->ida,GFP_KERNEL ); +if (index <0 ) +return index; + pdata->cpu_map[index] =topology_core_id (cpu); + attr_no = index +BASE_SYSFS_ATTR_NO ; + } -if (attr_no >MAX_CORE_DATA -1 ) -return -ERANGE ; +if (attr_no >MAX_CORE_DATA -1 ) { + err = -ERANGE ; + goto ida_free; + } tdata =init_temp_data (cpu, pkg_flag); -if (!tdata) -return -ENOMEM ; +if (!tdata) { + err = -ENOMEM ; + goto ida_free; + }/* Test if we can access the status register */ err =rdmsr_safe_on_cpu (cpu, tdata->status_reg, &eax, &edx);@@ -505,6 +516,9 @@ static int create_core_data(struct platform_device *pdev, unsigned int cpu, exit_free: pdata->core_data[attr_no] =NULL ;kfree (tdata); +ida_free: +if (!pkg_flag) +ida_free (&pdata->ida, index);return err; }@@ -524,6 +538,9 @@ static void coretemp_remove_core(struct platform_data *pdata, int index)kfree (pdata->core_data[index]); pdata->core_data[index] =NULL ; + +if (index >=BASE_SYSFS_ATTR_NO ) +ida_free (&pdata->ida, index -BASE_SYSFS_ATTR_NO ); }static int coretemp_probe (struct platform_device *pdev)@@ -537,6 +554,7 @@ static int coretemp_probe(struct platform_device *pdev)return -ENOMEM ; pdata->pkg_id = pdev->id; +ida_init (&pdata->ida);platform_set_drvdata (pdev, pdata); pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME,@@ -553,6 +571,7 @@ static int coretemp_remove(struct platform_device *pdev)if (pdata->core_data[i])coretemp_remove_core (pdata, i); +ida_destroy (&pdata->ida);return 0 ; }@@ -647,7 +666,7 @@ static int coretemp_cpu_offline(unsigned int cpu)struct platform_device *pdev =coretemp_get_pdev (cpu);struct platform_data *pd;struct temp_data *tdata; -int index, target; +int i, index =-1 , target;/* * Don't execute this on suspend as the device remove locks @@ -660,12 +679,19 @@ static int coretemp_cpu_offline(unsigned int cpu)if (!pdev)return 0 ; -/* The core id is too big, just return */ - index =TO_ATTR_NO (cpu); -if (index >MAX_CORE_DATA -1 ) + pd =platform_get_drvdata (pdev); + +for (i =0 ; i <NUM_REAL_CORES ; i++) { +if (pd->cpu_map[i] ==topology_core_id (cpu)) { + index = i +BASE_SYSFS_ATTR_NO ; +break ; + } + } + +/* Too many cores and this core is not populated, just return */ +if (index <0 )return 0 ; - pd =platform_get_drvdata (pdev); tdata = pd->core_data[index];cpumask_clear_cpu (cpu, &pd->cpumask);Signature · 1 line
2.25.1
PATCH v2 4/8 x86/topology: Fix multiple packages shown on a single-package system
In reply to Zhang RuiCPUID.1F/B does not emumerate Package level explicitly, instead, all the APIC-ID bits above the enumerated levels are assumed to be package ID bits.
Current code gets package ID by shifting out all the APIC-ID bits that Linux supports, rather than shifting out all the APIC-ID bits that CPUID.1F enumerates. This introduces problems when CPUID.1F enumerates a level that Linux does not support.
For example, on an AlderLake-N platform, there are 2 Ecore Modules, which has 4 atom cores in each module, in a single package.
Linux does not support Module level and interprets the Module ID bits as package ID and erroneously reports a multi module system as a multi-package system.
Fix this by using APIC-ID bits above all the CPUID.1F enumerated levels as package ID.
--- arch/x86/kernel/cpu/topology.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
arch/x86/kernel/cpu/topology.c +10 -4
@@ -96,6 +96,7 @@ int detect_extended_topology(struct cpuinfo_x86 *c)unsigned int ht_mask_width, core_plus_mask_width, die_plus_mask_width;unsigned int core_select_mask, core_level_siblings;unsigned int die_select_mask, die_level_siblings; +unsigned int pkg_mask_width;bool die_level_present = false;int leaf;
@@ -111,10 +112,10 @@ int detect_extended_topology(struct cpuinfo_x86 *c) core_level_siblings = smp_num_siblings =LEVEL_MAX_SIBLINGS (ebx); core_plus_mask_width = ht_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); die_level_siblings =LEVEL_MAX_SIBLINGS (ebx); - die_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); + pkg_mask_width = die_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); sub_index =1 ; - do { +while (true) {cpuid_count (leaf, sub_index, &eax, &ebx, &ecx, &edx);/*
@@ -132,8 +133,13 @@ int detect_extended_topology(struct cpuinfo_x86 *c) die_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); } +if (LEAFB_SUBTYPE (ecx) !=INVALID_TYPE ) + pkg_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); +else +break ; + sub_index++; - }while (LEAFB_SUBTYPE (ecx) !=INVALID_TYPE ); + } core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width; die_select_mask = (~(-1 << die_plus_mask_width)) >>
@@ -148,7 +154,7 @@ int detect_extended_topology(struct cpuinfo_x86 *c) } c->phys_proc_id = apic->phys_pkg_id (c->initial_apicid, - die_plus_mask_width); + pkg_mask_width);/* * Reinit the apicid, now that we have extended initial_apicid. */
Signature · 1 line
2.25.1
Re: [PATCH V2 4/8] x86/topology: Fix multiple packages shown on a single-package system
Quoted 2 lines · Zhang Rui
Suggested-and-reviewed-by Len Brown <[email protected]>Signed-off-by Zhang Rui <[email protected]>
"Please do not use combined tags, e.g. Reported-and-tested-by, as they just complicate automated extraction of tags."
https://www.kernel.org/doc/html/latest/process/maintainer-tip.html
Re: [PATCH V2 4/8] x86/topology: Fix multiple packages shown on a single-package system
Hi, Dave,
Quoted 9 lines · Dave Hansen
Quoted 2 lines · Zhang Rui
Suggested-and-reviewed-by Len Brown <[email protected]>Signed-off-by Zhang Rui <[email protected]>"Please do not use combined tags, e.g. Reported-and-tested-by, as they
just complicate automated extraction of tags."https://www.kernel.org/doc/html/latest/process/maintainer-tip.html
Thanks for pointing this out.
Problem is addressed in V3 series.
thanks,
rui
PATCH v2 5/8 x86/topology: Fix duplicated core ID within a package
In reply to Zhang RuiToday, core ID is assumed to be unique within each package.
But an AlderLake-N platform adds a Module level between core and package, Linux excludes the unknown modules bits from the core ID, resulting in duplicate core ID's.
To keep core ID unique within a package, Linux must include all APIC-ID bits for known or un-known levels above the core and below the package in the core ID.
It is important to understand that core ID's have always come directly from the APIC-ID encoding, which comes from the BIOS. Thus there is no guarantee that they start at 0, or that they are contiguous. As such, naively using them for array indexes can be problematic.
--- arch/x86/kernel/cpu/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/cpu/topology.c +1 -1
@@ -141,7 +141,7 @@ int detect_extended_topology(struct cpuinfo_x86 *c) sub_index++; } - core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width; + core_select_mask = (~(-1 << pkg_mask_width)) >> ht_mask_width; die_select_mask = (~(-1 << die_plus_mask_width)) >> core_plus_mask_width;
Signature · 1 line
2.25.1
PATCH v2 6/8 x86/topology: Fix max_siblings calculation
In reply to Zhang RuiThe max siblings value returned by CPUID.1F SMT level EBX differs among CPUs on Intel Hybrid platforms like ADL-S/P.
It returns 2 for Pcore CPUs which have HT sibling and 1 for Ecore CPUs which do not.
Today, CPUID SMT level EBX sets the global variable smp_num_siblings. Thus, smp_num_siblings is overridden to different values based on the CPU Pcore/Ecore enumeration order.
For example,
[ 0.201005] detect_extended_topology: CPU APICID 0x0, smp_num_siblings 2, x86_max_cores 10 [ 0.201117] start_kernel->check_bugs->cpu_smt_check_topology: smp_num_siblings 2 ... [ 0.010146] detect_extended_topology: CPU APICID 0x8, smp_num_siblings 2, x86_max_cores 10 ... [ 0.010146] detect_extended_topology: CPU APICID 0x39, smp_num_siblings 2, x86_max_cores 10 [ 0.010146] detect_extended_topology: CPU APICID 0x48, smp_num_siblings 1, x86_max_cores 20 ... [ 0.010146] detect_extended_topology: CPU APICID 0x4e, smp_num_siblings 1, x86_max_cores 20 [ 2.583800] sched_set_itmt_core_prio: smp_num_siblings 1
This inconsistency brings several potential issues:
1. some kernel configuration like cpu_smt_control, as set in start_kernel()->check_bugs()->cpu_smt_check_topology(), depends on smp_num_siblings set by cpu0.
It is pure luck that all the current hybrid platforms use Pcore as cpu0 and hide this problem.
2. some per CPU data like cpuinfo_x86.x86_max_cores that depends on smp_num_siblings becomes inconsistent and bogus.
3. the final smp_num_siblings value after boot depends on the last CPU enumerated, which could either be Pcore or Ecore CPU.
The solution is to use CPUID EAX bits_shift to get the maximum number of addressable logical processors, and use this to determin max siblings. Because:
1. the CPUID EAX bits_shift values are consistent among CPUs as far as observed.
2. some code already uses smp_num_siblings value to isolate the SMT ID bits in APIC-ID, like apic_id_is_primary_thread().
--- arch/x86/kernel/cpu/topology.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/topology.c +11 -6
@@ -23,7 +23,12 @@#define LEAFB_SUBTYPE (ecx) (((ecx) >> 8) & 0xff)#define BITS_SHIFT_NEXT_LEVEL (eax) ((eax) & 0x1f) -#define LEVEL_MAX_SIBLINGS (ebx) ((ebx) & 0xffff) + +/* +* Use EAX bit_shift to calculate the maximum number of addressable logical +* processors sharing the current level. +*/ +#define LEVEL_MAX_SIBLINGS (eax) (1 << BITS_SHIFT_NEXT_LEVEL(eax))unsigned int __max_die_per_package__read_mostly =1 ;EXPORT_SYMBOL (__max_die_per_package);
@@ -79,7 +84,7 @@ int detect_extended_topology_early(struct cpuinfo_x86 *c)* initial apic id, which also represents 32-bit extended x2apic id. */ c->initial_apicid = edx; - smp_num_siblings =LEVEL_MAX_SIBLINGS (ebx); + smp_num_siblings =LEVEL_MAX_SIBLINGS (eax);#endif return 0 ; }
@@ -109,9 +114,9 @@ int detect_extended_topology(struct cpuinfo_x86 *c)*/ cpuid_count (leaf,SMT_LEVEL , &eax, &ebx, &ecx, &edx); c->initial_apicid = edx; - core_level_siblings = smp_num_siblings =LEVEL_MAX_SIBLINGS (ebx); + core_level_siblings = smp_num_siblings =LEVEL_MAX_SIBLINGS (eax); core_plus_mask_width = ht_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); - die_level_siblings =LEVEL_MAX_SIBLINGS (ebx); + die_level_siblings =LEVEL_MAX_SIBLINGS (eax); pkg_mask_width = die_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); sub_index =1 ;
@@ -122,14 +127,14 @@ int detect_extended_topology(struct cpuinfo_x86 *c)* Check for the Core type in the implemented sub leaves. */ if (LEAFB_SUBTYPE (ecx) ==CORE_TYPE ) { - core_level_siblings =LEVEL_MAX_SIBLINGS (ebx); + core_level_siblings =LEVEL_MAX_SIBLINGS (eax); core_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); die_level_siblings = core_level_siblings; die_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); }if (LEAFB_SUBTYPE (ecx) ==DIE_TYPE ) { die_level_present = true; - die_level_siblings =LEVEL_MAX_SIBLINGS (ebx); + die_level_siblings =LEVEL_MAX_SIBLINGS (eax); die_plus_mask_width =BITS_SHIFT_NEXT_LEVEL (eax); }
Signature · 1 line
2.25.1
PATCH v2 7/8 Documentation: x86: Update smp_num_siblings/x86_max_cores description
In reply to Zhang Ruismp_num_siblings/cpuinfo_x86.x86_max_cores are retrieved via CPUID EAX bit_shift value, and they represent the maximum possible number of threads in a core, and the maximum possible number of cores in a package.
Update the smp_num_siblings/cpuinfo_x86.x86_max_cores description in the documentation.
--- Documentation/x86/topology.rst | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
Documentation/x86/topology.rst +5 -4
@@ -49,7 +49,8 @@ AMD nomenclature for package is 'Node'. - cpuinfo_x86.x86_max_cores: - The number of cores in a package. This information is retrieved via CPUID. + The maximum possible number of cores in a package. This information is + retrieved via CPUID. - cpuinfo_x86.x86_max_dies:
@@ -102,10 +103,10 @@ AMDs nomenclature for a CMT core is "Compute Unit". The kernel always uses - smp_num_siblings: - The number of threads in a core. The number of threads in a package can be - calculated by:: + The maximum possible number of threads in a core. The maximum possible + number of threads in a package can be calculated by:: - threads_per_package = cpuinfo_x86.x86_max_cores * smp_num_siblings + maximum_threads_per_package = cpuinfo_x86.x86_max_cores * smp_num_siblings Threads
Signature · 1 line
2.25.1
PATCH v2 8/8 Documentation: x86: Remove obsolete x86_max_dies description
In reply to Zhang Ruicpuinfo_x86.x86_max_dies is introduced in commit 7745f03eb395 ("x86/topology: Add CPUID.1F multi-die/package support") and then removed in commit 14d96d6c06b5
("x86/topology: Create topology_max_die_per_package()").
Remove the obsolete cpuinfo_x86.x86_max_dies description.
--- Documentation/x86/topology.rst | 4 ---- 1 file changed, 4 deletions(-)
Documentation/x86/topology.rst +0 -4
@@ -52,10 +52,6 @@ AMD nomenclature for package is 'Node'. The maximum possible number of cores in a package. This information is retrieved via CPUID. - - cpuinfo_x86.x86_max_dies: - - The number of dies in a package. This information is retrieved via CPUID. - - cpuinfo_x86.cpu_die_id: The physical ID of the die. This information is retrieved via CPUID.
Signature · 1 line
2.25.1
Quoted 25 lines · Zhang Rui
On Intel AlderLake-N platforms where there are Ecores only, the Ecore Module topology is enumerated via CPUID.1F Module level, which has not
been supported by Linux kernel yet.This exposes two issues in current CPUID.1F handling code.
1. Linux interprets the Module ID bits as package ID and erroneously reports a multi module system as a multi-package system.
2. Linux excludes the unknown Module ID bits from the core ID, and results
in duplicate core ID’s shown in a package after the first issue
solved.Plus that, a third problem is observed on Intel Hybrid ADL-S/P platforms.
The return value of CPUID.1F SMT level EBX (number of siblings) differs on
Pcore CPUs and Ecore CPUs, and results in inconsistentsmp_num_siblings
value based on the Pcore/Ecore CPU enumeration order. This could bring
some potential issues although we have not observed any functionalities
issues so far.
Quoted 5 lines
This patch series fixes these three problems in CPUID.1F handling code,
together with some related fixes and document updates.
Hi,
These patches are mainly bug fixes for ADL-N and Intel Hybrid platforms.
May I know if there are any further changes needed?
thanks,
rui
Quoted 9 lines
thanks,
-rui---
Changes since V1:
- fix/improve changelog/comment wording issues
- reorder the patches to eliminate bisection breakage window
- add a new patch for coretemp driver variable renaming
- update coretemp driver patch to fix a case ofida_free(&ida, -2)