adc-joystick: add poll-interval
Subsystems (5)
v13 cover adc-joystick: add poll-interval
From: Chris Morgan <[email protected]>
Add support to the existing adc-joystick driver to support polling rather than relying on triggered buffers. This is useful for devices that do not offer triggered buffers in hardware. Code adapted from changes made by Maya Matuszczyk <[email protected]>.
Changes from V12:
- Refactor for 6.0 kernel. This required changing the return routine slightly for the probe function as the input device registration has moved.
- Modified error handling for checking the "poll-interval" property.
Changes from V11:
- Remove additional unnecessary line breaks.
Changes from V10:
- Removed two unnecessary line breaks.
Changes from V9:
- Simplified skipping of channel checking logic.
- Simplified return logic for driver probe.
Changes from V8:
- Changed logic for checking channels to skip checking of storagebits.
- Changed comment format to comply with Linux style rules.
Changes from V7:
- Dropped acks from adc-joystick.c changes, as it has been altered somewhat since v7.
- Improved checking value of poll-interval to ensure explicit error handling in the event of malformed values.
- Adjusted logic to not check for storagebits if polling is in use, which allows adc-joystick to work in polling mode for devices that utilize a mux (such as the Odroid Go Super and the Anbernic RG353).
- Changed error message and channel size comparison logic slightly to ensure code can fit within 80 character column width.
Changes from V6:
- Reverted back to "poll-interval" after mailing list discussion.
- Referenced input.yaml for definition of poll-interval in adc-joystick documentation.
Changes from V5:
- Corrected an error found by yamllint in the documentation.
Changes from V4:
- Added unit property to devicetree attribute making it now "poll-interval-ms".
- Simplified logic for setting polled value and made variable names more clear.
Changes from V3:
- After lengthy discussion decided to support with existing attribute of "poll-interval". If present, the driver will use polling and if not present, it will use triggered buffers (as the driver does today).
- Corrected some lines to honor the 80 character line-limit.
- Check return value from polling method and return early if there is an error reading the data.
Changes from V2:
- Changed parameter from "adc-joystick,polled" to "adc-joystick,no-hardware-trigger" as it is more representative of what the driver and hardware are doing.
Changes from V1:
- Removed driver compatible string of "adc-joystick-polled".
- Added new optional boolean value of "adc-joystick,polled".
- Cleaned up if statements regarding polling behavior.
Chris Morgan (3):
dt-bindings: adc-joystick: add poll-interval
input: adc-joystick - Add polled input device support
arm64: dts: rockchip: Update joystick to polled for OG2
.../bindings/input/adc-joystick.yaml | 5 ++ .../boot/dts/rockchip/rk3326-odroid-go2.dts | 1 + drivers/input/joystick/adc-joystick.c | 48 +++++++++++++++++-- 3 files changed, 51 insertions(+), 3 deletions(-)
Signature · 1 line
2.25.1
PATCH v13 1/3 dt-bindings: adc-joystick: add poll-interval
From: Chris Morgan <[email protected]>
Add poll-interval support for the adc-joystick documentation. This is an optional value and if not provided the adc-joystick works as it does today (with buffers). If this value is provided, the adc-joystick driver is polled at the specified interval. The existing attribute of "poll-interval" was used instead of complying with property-units.yaml after discussion of the issue on the mailing list.
--- Documentation/devicetree/bindings/input/adc-joystick.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/input/adc-joystick.yaml +5 -0
@@ -14,6 +14,9 @@ description: > Bindings for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. +allOf: + - $ref: input.yaml# + properties: compatible: const: adc-joystick
@@ -28,6 +31,8 @@ properties: https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml for details. + poll-interval: true + '#address-cells': const: 1
Signature · 1 line
2.25.1
PATCH v13 2/3 input: adc-joystick - Add polled input device support
In reply to Chris MorganFrom: Chris Morgan <[email protected]>
Add polled input device support to the adc-joystick driver. This is useful for devices which do not have hardware capable triggers on their SARADC. Code modified from adc-joystick.c changes made by Maya Matuszczyk.
--- drivers/input/joystick/adc-joystick.c | 48 +++++++++++++++++++++++++-- 1 file changed, 45 insertions(+), 3 deletions(-)
drivers/input/joystick/adc-joystick.c +45 -3
@@ -26,8 +26,23 @@ struct adc_joystick {struct adc_joystick_axis *axes;struct iio_channel *chans;int num_chans; +bool polled; }; +static void adc_joystick_poll (struct input_dev *input) +{ +struct adc_joystick *joy =input_get_drvdata (input); +int i, val, ret; + +for (i =0 ; i < joy->num_chans; i++) { + ret =iio_read_channel_raw (&joy->chans[i], &val); +if (ret <0 ) +return ; +input_report_abs (input, joy->axes[i].code, val); + } +input_sync (input); +} +static int adc_joystick_handle (const void *data,void *private) {struct adc_joystick *joy = private;
@@ -179,6 +194,7 @@ static int adc_joystick_probe(struct platform_device *pdev)int error;int bits;int i; +unsigned int poll_interval; joy =devm_kzalloc (dev,sizeof (*joy),GFP_KERNEL );if (!joy)
@@ -192,8 +208,25 @@ static int adc_joystick_probe(struct platform_device *pdev)return error; } -/* Count how many channels we got. NULL terminated. */ + error =device_property_read_u32 (dev,"poll-interval" , &poll_interval); +if (error) { +/* -EINVAL means the property is absent. */ +if (error != -EINVAL ) +return error; + }else if (poll_interval ==0 ) { +dev_err (dev,"Unable to get poll-interval\n" ); +return -EINVAL ; + }else { + joy->polled = true; + } + +/* +* Count how many channels we got. NULL terminated. +* Do not check the storage size if using polling. +*/ for (i =0 ; joy->chans[i].indio_dev; i++) { +if (joy->polled) +continue ; bits = joy->chans[i].channel->scan_type.storagebits;if (!bits || bits >16 ) {dev_err (dev,"Unsupported channel storage size\n" );
@@ -215,13 +248,20 @@ static int adc_joystick_probe(struct platform_device *pdev) joy->input = input; input->name = pdev->name; input->id.bustype =BUS_HOST ; - input->open = adc_joystick_open; - input->close = adc_joystick_close; error =adc_joystick_set_axes (dev, joy);if (error)return error; +if (joy->polled) { +input_setup_polling (input, adc_joystick_poll); +input_set_poll_interval (input, poll_interval); + goto register_joystick; + }else { + input->open = adc_joystick_open; + input->close = adc_joystick_close; + } + joy->buffer =iio_channel_get_all_cb (dev, adc_joystick_handle, joy);if (IS_ERR (joy->buffer)) {dev_err (dev,"Unable to allocate callback buffer\n" );
@@ -234,6 +274,8 @@ static int adc_joystick_probe(struct platform_device *pdev)return error; } +register_joystick: +input_set_drvdata (input, joy); error =input_register_device (input);
Signature · 1 line
2.25.1
PATCH v13 3/3 arm64: dts: rockchip: Update joystick to polled for OG2
In reply to Chris MorganFrom: Chris Morgan <[email protected]>
Update the Odroid Go Advance to use "poll-interval" from the adc-joystick driver.
--- arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +1 -0
@@ -26,6 +26,7 @@ adc-joystick { compatible = "adc-joystick"; io-channels = <&saradc 1>, <&saradc 2>; + poll-interval = <60>; #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
2.25.1
Re: (subset) [PATCH v13 0/3] adc-joystick: add poll-interval
In reply to Chris MorganQuoted 8 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add support to the existing adc-joystick driver to support polling rather than relying on triggered buffers. This is useful for devices that do not offer triggered buffers in hardware. Code adapted from changes made by Maya Matuszczyk <[email protected]>.
[...]
Applied, thanks!
[3/3] arm64: dts: rockchip: Update joystick to polled for OG2
commit: ec3fd1adfda96f42e70dd5f0f69451d642d3598b
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>