net: fec: change the default rx copybreak length to 1518
Subsystems (3)
[email protected]
maintainerPATCH 1/1 net: fec: change the default rx copybreak length to 1518
From: Wei Fang <[email protected]>
Set the default rx copybreak value to 1518 so that improve the performance when SMMU is enabled. User can change the copybreak length in dynamically by ethtool.
--- drivers/net/ethernet/freescale/fec_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/ethernet/freescale/fec_main.c +9 -1
@@ -299,7 +299,15 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");#define FEC_WOL_FLAG_ENABLE (0x1 << 1)#define FEC_WOL_FLAG_SLEEP_ON (0x1 << 2) -#define COPYBREAK_DEFAULT 256 +/* By default, set the copybreak to 1518, +* then the RX path always keep DMA memory unchanged, and +* allocate one new skb and copy DMA memory data to the new skb +* buffer, which can improve the performance when SMMU is enabled. +* +* The driver support .set_tunable() interface for ethtool, user +* can dynamicly change the copybreak value. +*/ +#define COPYBREAK_DEFAULT 1518/* Max number of allowed TCP segments for software TSO */ #define FEC_MAX_TSO_SEGS 100
Signature · 1 line
2.25.1
Quoted 5 lines · On Fri, Aug 19, 2022 at 05:00:41PM +0800, [email protected] wrote:
From: Wei Fang <[email protected]>
Set the default rx copybreak value to 1518 so that improve the performance when SMMU is enabled. User can change the copybreak length in dynamically by ethtool.
Please provide some benchmark for this. And include a range of SoCs which include the FEC. Maybe this helps for the platform you are testing on, but is bad for imx25, Vybrid etc?
Quoted 3 lines
+ * The driver support .set_tunable() interface for ethtool, user
+ * can dynamicly change the copybreak value.
+ */
Which also means you could change it for your platform. So a patch like this needs justifying.
Andrew
Jakub Kicinski
maintainerQuoted 9 lines · On Fri, 19 Aug 2022 17:57:07 +0200 Andrew Lunn wrote:
Quoted 3 lines · On Fri, Aug 19, 2022 at 05:00:41PM +0800, [email protected] wrote:
Set the default rx copybreak value to 1518 so that improve the performance when SMMU is enabled. User can change the copybreak length in dynamically by ethtool.
Please provide some benchmark for this. And include a range of SoCs which include the FEC. Maybe this helps for the platform you are testing on, but is bad for imx25, Vybrid etc?
Quoted 6 lines
Quoted 3 lines
+ * The driver support .set_tunable() interface for ethtool, user
+ * can dynamicly change the copybreak value.
+ */Which also means you could change it for your platform. So a patch like this needs justifying.
Fully agreed, perhaps if the DMA mapping on the platform is extremely slow we're better off making the platform use bounce buffers for everything.
Another though is that you can try to manually sync only the parts of the buffers that the device actually touched instead of full 2kB, and tell the DMA core to skip the sync of the full buffer.