arm64: dts: imx8mm-venice-gw7902: fix UART1 CTS
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mm-venice-gw7902: fix UART1 CTS
Configure the correct GPIO for UART1 CTS.
Signed-off-by Tim Harvey <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +1 -1
@@ -651,7 +651,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; };
Signature · 1 line
2.25.1
Quoted 3 lines · Tim Harvey
Configure the correct GPIO for UART1 CTS.
Signed-off-by Tim Harvey <[email protected]>
Not sure why you resent it, but it's been landed on mainline [1].
Shawn
Quoted 20 lines
--- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +1
-1@@ -651,7 +651,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; };Signature · 1 line
2.25.1