arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
Subsystems (3)
PATCH 1/1 arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
Fix copy-paste error of the I2C5 bus recovery GPIO assignment, the I2C5 GPIOs are on gpio3 instead of gpio5.
Fixes 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by Marek Vasut <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc NXP Linux Team <[email protected]>
Cc Peng Fan <[email protected]>
Cc Shawn Guo <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +2 -2
@@ -441,8 +441,8 @@ &i2c5 { /* HDMI EDID bus */ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>; pinctrl-1 = <&pinctrl_i2c5_gpio>; - scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; };
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 10 lines · Marek Vasut
Fix copy-paste error of the I2C5 bus recovery GPIO assignment, the I2C5 GPIOs are on gpio3 instead of gpio5.
Fixes 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")Signed-off-by Marek Vasut <[email protected]>Cc Fabio Estevam <[email protected]>Cc NXP Linux Team <[email protected]>Cc Peng Fan <[email protected]>Cc Shawn Guo <[email protected]>
As suggested by others, please put these Cc and To below "---" for future patches.
Applied, thanks!
Quoted 22 lines
--- arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +2
-2@@ -441,8 +441,8 @@ &i2c5 { /* HDMI EDID bus */ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>; pinctrl-1 = <&pinctrl_i2c5_gpio>; - scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; };Signature · 1 line
2.35.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel