tests/vm: Remove obsolete Fedora VM test
RFC PATCH 1/1 tests/vm: Remove obsolete Fedora VM test
It's still based on Fedora 30 - which is not supported anymore by QEMU since years. Seems like nobody is using (and refreshing) this, and it's easier to test this via a container anyway, so let's remove this now.
--- tests/vm/Makefile.include | 3 +- tests/vm/fedora | 190 -------------------------------------- 2 files changed, 1 insertion(+), 192 deletions(-) delete mode 100755 tests/vm/fedora
tests/vm/Makefile.include +1 -2
@@ -15,7 +15,7 @@ endif EFI_AARCH64 = $(wildcard $(BUILD_DIR)/pc-bios/edk2-aarch64-code.fd) -X86_IMAGES := freebsd netbsd openbsd fedora haiku.x86_64 +X86_IMAGES := freebsd netbsd openbsd haiku.x86_64 ifneq ($(GENISOIMAGE),) X86_IMAGES += centos ifneq ($(EFI_AARCH64),)
@@ -45,7 +45,6 @@ vm-help vm-test: @echo " vm-build-freebsd - Build QEMU in FreeBSD VM" @echo " vm-build-netbsd - Build QEMU in NetBSD VM" @echo " vm-build-openbsd - Build QEMU in OpenBSD VM" - @echo " vm-build-fedora - Build QEMU in Fedora VM" ifneq ($(GENISOIMAGE),) @echo " vm-build-centos - Build QEMU in CentOS VM, with Docker" ifneq ($(EFI_AARCH64),)
tests/vm/fedora deleted +0 -190
190 lines not on this page · raw message
Signature · 1 line
2.31.1
Quoted 5 lines · Thomas Huth
It's still based on Fedora 30 - which is not supported anymore by QEMU since years. Seems like nobody is using (and refreshing) this, and it's easier to test this via a container anyway, so let's remove this now.
Signed-off-by Thomas Huth <[email protected]>
Queued to testing/next, thanks.
Quoted 223 lines
--- tests/vm/Makefile.include | 3 +- tests/vm/fedora | 190 -------------------------------------- 2 files changed, 1 insertion(+), 192 deletions(-) delete mode 100755 tests/vm/fedoratests/vm/Makefile.include +1
-2@@ -15,7 +15,7 @@ endif EFI_AARCH64 = $(wildcard $(BUILD_DIR)/pc-bios/edk2-aarch64-code.fd) -X86_IMAGES := freebsd netbsd openbsd fedora haiku.x86_64 +X86_IMAGES := freebsd netbsd openbsd haiku.x86_64 ifneq ($(GENISOIMAGE),) X86_IMAGES += centos ifneq ($(EFI_AARCH64),)@@ -45,7 +45,6 @@ vm-help vm-test: @echo " vm-build-freebsd - Build QEMU in FreeBSD VM" @echo " vm-build-netbsd - Build QEMU in NetBSD VM" @echo " vm-build-openbsd - Build QEMU in OpenBSD VM" - @echo " vm-build-fedora - Build QEMU in Fedora VM" ifneq ($(GENISOIMAGE),) @echo " vm-build-centos - Build QEMU in CentOS VM, with Docker" ifneq ($(EFI_AARCH64),)tests/vm/fedora deleted +0
-190@@ -1,190 +0,0 @@ -#!/usr/bin/env python3 -# -# Fedora VM image -# -# Copyright 2019 Red Hat Inc. -# -# Authors: -# Gerd Hoffmann <[email protected]> -# -# This code is licensed under the GPL version 2 or later. See -# the COPYING file in the top-level directory. -# - -import os -import re -import sys -import time -import socket -import subprocess -import basevm - -class FedoraVM(basevm.BaseVM): - name = "fedora" - arch = "x86_64" - - base = "https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/30/" - link = base + "Server/x86_64/iso/Fedora-Server-netinst-x86_64-30-1.2.iso" - repo = base + "Server/x86_64/os/" - full = base + "Everything/x86_64/os/" - csum = "5e4eac4566d8c572bfb3bcf54b7d6c82006ec3c6c882a2c9235c6d3494d7b100" - size = "20G" - pkgs = [ - # tools - 'git-core', - 'gcc', 'binutils', 'make', 'ninja-build', - - # perl - 'perl', - - # libs: usb - '"pkgconfig(libusb-1.0)"', - '"pkgconfig(libusbredirparser-0.5)"', - - # libs: crypto - '"pkgconfig(gnutls)"', - - # libs: ui - '"pkgconfig(sdl2)"', - '"pkgconfig(gtk+-3.0)"', - '"pkgconfig(ncursesw)"', - - # libs: audio - '"pkgconfig(libpulse)"', - '"pkgconfig(alsa)"', - - # libs: migration - '"pkgconfig(libzstd)"', -] - - BUILD_SCRIPT = """ - set -e; - rm -rf /home/qemu/qemu-test.* - cd $(mktemp -d /home/qemu/qemu-test.XXXXXX); - mkdir src build; cd src; - tar -xf /dev/vdb; - cd ../build - ../src/configure --python=python3 {configure_opts}; - gmake --output-sync -j{jobs} {target} {verbose}; - """ - - def build_image(self, img): - self.print_step("Downloading install iso") - cimg = self._download_with_cache(self.link, sha256sum=self.csum) - img_tmp = img + ".tmp" - iso = img + ".install.iso" - - self.print_step("Preparing iso and disk image") - subprocess.check_call(["cp", "-f", cimg, iso]) - self.exec_qemu_img("create", "-f", "qcow2", img_tmp, self.size) - self.print_step("Booting installer") - self.boot(img_tmp, extra_args = [ - "-machine", "graphics=off", - "-device", "VGA", - "-cdrom", iso - ]) - self.console_init(300) - self.console_wait("installation process.") - time.sleep(0.3) - self.console_send("\t") - time.sleep(0.3) - self.console_send(" console=ttyS0") - proxy = os.environ.get("http_proxy") - if not proxy is None: - self.console_send(" proxy=%s" % proxy) - self.console_send(" inst.proxy=%s" % proxy) - self.console_send(" inst.repo=%s" % self.repo) - self.console_send("\n") - - self.console_wait_send("2) Use text mode", "2\n") - - self.console_wait_send("5) [!] Installation Dest", "5\n") - self.console_wait_send("1) [x]", "c\n") - self.console_wait_send("2) [ ] Use All Space", "2\n") - self.console_wait_send("2) [x] Use All Space", "c\n") - self.console_wait_send("1) [ ] Standard Part", "1\n") - self.console_wait_send("1) [x] Standard Part", "c\n") - - self.console_wait_send("7) [!] Root password", "7\n") - self.console_wait("Password:") - self.console_send("%s\n" % self._config["root_pass"]) - self.console_wait("Password (confirm):") - self.console_send("%s\n" % self._config["root_pass"]) - - self.console_wait_send("8) [ ] User creation", "8\n") - self.console_wait_send("1) [ ] Create user", "1\n") - self.console_wait_send("3) User name", "3\n") - self.console_wait_send("ENTER:", "%s\n" % self._config["guest_user"]) - self.console_wait_send("4) [ ] Use password", "4\n") - self.console_wait_send("5) Password", "5\n") - self.console_wait("Password:") - self.console_send("%s\n" % self._config["guest_pass"]) - self.console_wait("Password (confirm):") - self.console_send("%s\n" % self._config["guest_pass"]) - self.console_wait_send("7) Groups", "c\n") - - while True: - good = self.console_wait("3) [x] Installation", - "3) [!] Installation") - self.console_send("r\n") - if good: - break - time.sleep(10) - - while True: - good = self.console_wait("4) [x] Software", - "4) [!] Software") - self.console_send("r\n") - if good: - break - time.sleep(10) - self.console_send("r\n" % self._config["guest_pass"]) - - self.console_wait_send("'b' to begin install", "b\n") - - self.print_step("Installation started now, this will take a while") - - self.console_wait_send("Installation complete", "\n") - self.print_step("Installation finished, rebooting") - - # setup qemu user - prompt = " ~]$" - self.console_ssh_init(prompt, self._config["guest_user"], - self._config["guest_pass"]) - self.console_wait_send(prompt, "exit\n") - - # setup root user - prompt = " ~]#" - self.console_ssh_init(prompt, "root", self._config["root_pass"]) - self.console_sshd_config(prompt) - - # setup virtio-blk #1 (tarfile) - self.console_wait(prompt) - self.console_send("echo 'KERNEL==\"vdb\" MODE=\"666\"' >> %s\n" % - "/etc/udev/rules.d/99-qemu.rules") - - self.print_step("Configuration finished, rebooting") - self.console_wait_send(prompt, "reboot\n") - self.console_wait("login:") - self.wait_ssh() - - self.print_step("Installing packages") - self.ssh_root_check("rm -vf /etc/yum.repos.d/fedora*.repo\n") - self.ssh_root_check("echo '[fedora]' >> /etc/yum.repos.d/qemu.repo\n") - self.ssh_root_check("echo 'baseurl=%s' >> /etc/yum.repos.d/qemu.repo\n" % self.full) - self.ssh_root_check("echo 'gpgcheck=0' >> /etc/yum.repos.d/qemu.repo\n") - self.ssh_root_check("dnf install -y %s\n" % " ".join(self.pkgs)) - - # shutdown - self.ssh_root(self.poweroff) - self.console_wait("sleep state S5") - self.wait() - - if os.path.exists(img): - os.remove(img) - os.rename(img_tmp, img) - os.remove(iso) - self.print_step("All done") - -if __name__ == "__main__": - sys.exit(basevm.main(FedoraVM))
Signature · 1 line
Alex Bennée
Quoted 10 lines · Alex Bennée
Quoted 5 lines · Thomas Huth
It's still based on Fedora 30 - which is not supported anymore by QEMU since years. Seems like nobody is using (and refreshing) this, and it's easier to test this via a container anyway, so let's remove this now.
Signed-off-by Thomas Huth <[email protected]>Queued to testing/next, thanks.
FYI this is the image I'm using to test x86 guest on aarch64/mips64 hosts, but I can test a BSD-based instead; I suppose Linux as a guest is already well tested.
Quoted 27 lines
Quoted 27 lines
--- tests/vm/Makefile.include | 3 +- tests/vm/fedora | 190 -------------------------------------- 2 files changed, 1 insertion(+), 192 deletions(-)delete mode 100755 tests/vm/fedora
tests/vm/Makefile.include +1
-2@@ -15,7 +15,7 @@ endif EFI_AARCH64 = $(wildcard $(BUILD_DIR)/pc-bios/edk2-aarch64-code.fd) -X86_IMAGES := freebsd netbsd openbsd fedora haiku.x86_64 +X86_IMAGES := freebsd netbsd openbsd haiku.x86_64 ifneq ($(GENISOIMAGE),) X86_IMAGES += centos ifneq ($(EFI_AARCH64),)@@ -45,7 +45,6 @@ vm-help vm-test: @echo " vm-build-freebsd - Build QEMU in FreeBSD VM" @echo " vm-build-netbsd - Build QEMU in NetBSD VM" @echo " vm-build-openbsd - Build QEMU in OpenBSD VM" - @echo " vm-build-fedora - Build QEMU in Fedora VM" ifneq ($(GENISOIMAGE),) @echo " vm-build-centos - Build QEMU in CentOS VM, with Docker" ifneq ($(EFI_AARCH64),)
Quoted 7 lines · Philippe Mathieu-Daudé
Quoted 6 lines · Alex Bennée
Quoted 4 lines · Thomas Huth
It's still based on Fedora 30 - which is not supported anymore by QEMU since years. Seems like nobody is using (and refreshing) this, and it's easier to test this via a container anyway, so let's remove this now.
Quoted 6 lines
Quoted 2 lines
Quoted 1 line
Signed-off-by Thomas Huth <[email protected]>Queued to testing/next, thanks.
FYI this is the image I'm using to test x86 guest on aarch64/mips64 hosts, but I can test a BSD-based instead; I suppose Linux as a guest is already well tested.
We already have a lot of coverage in avocado for that. If we want to keep a VM image around though it needs updating to something supported (either an LTS or more recent Fedora).
Quoted 27 lines
Quoted 27 lines
Quoted 27 lines
--- tests/vm/Makefile.include | 3 +- tests/vm/fedora | 190 -------------------------------------- 2 files changed, 1 insertion(+), 192 deletions(-)delete mode 100755 tests/vm/fedora
tests/vm/Makefile.include +1
-1@@ -15,7 +15,7 @@ endif EFI_AARCH64 = $(wildcard $(BUILD_DIR)/pc-bios/edk2-aarch64-code.fd) -X86_IMAGES := freebsd netbsd openbsd fedora haiku.x86_64 +X86_IMAGES := freebsd netbsd openbsd haiku.x86_64 ifneq ($(GENISOIMAGE),) X86_IMAGES += centos ifneq ($(EFI_AARCH64),)@@ -45,7 +45,6 @@ vm-help vm-test: @echo " vm-build-freebsd - Build QEMU in FreeBSD VM" @echo " vm-build-netbsd - Build QEMU in NetBSD VM" @echo " vm-build-openbsd - Build QEMU in OpenBSD VM" - @echo " vm-build-fedora - Build QEMU in Fedora VM" ifneq ($(GENISOIMAGE),) @echo " vm-build-centos - Build QEMU in CentOS VM, with Docker" ifneq ($(EFI_AARCH64),)
Signature · 1 line
Alex Bennée
Quoted 8 lines · Philippe Mathieu-Daudé
Quoted 7 lines · Alex Bennée
Quoted 4 lines · Thomas Huth
It's still based on Fedora 30 - which is not supported anymore by QEMU since years. Seems like nobody is using (and refreshing) this, and it's easier to test this via a container anyway, so let's remove this now.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Thomas Huth <[email protected]>Queued to testing/next, thanks.
FYI this is the image I'm using to test x86 guest on aarch64/mips64 hosts, but I can test a BSD-based instead; I suppose Linux as a guest is already well tested.
Do you need to compile-test QEMU there? If not, and if you just want to test an x86 guest on a non-x86 host, I guess you could use any other x86 Linux image, too (even boot a Fedora image directly from the ISO file).
Thomas