Extend Qt6 configuration
PATCH v2 1/1 Extend Qt6 configuration
Extend qt6base package configuration options and add license/hash information.
This is mostly a port of the existing qt5 options to qt6 and checked that the correct CMake options are used.
see https://github.com/qt/qtbase/blob/dev/cmake/configure-cmake-mapping.md
This should be a good starting point to get more fully featured qt6 support
Changes in v2:
* Rework as series with a patch per feature added
Jesse Van Gavere (29):
package/qt6/qt6base: Add qt6base hash file package/qt6/qt6base: Add license information package/qt6/qt6base: add support for network module package/qt6/qt6base: add support for concurrent module package/qt6/qt6base: add support for xml module package/qt6/qt6base: add support for test module package/qt6/qt6base: add support for building examples package/qt6/qt6base: add support for dbus module package/qt6/qt6base: add support for syslog backend package/qt6/qt6base: add qt support for journald when using systemd package/qt6/qt6base: add qt support for zstd when using the package package/qt6/qt6base: add qt support for SSE/AVX SIMD extensions package/qt6/qt6base: add linking to libatomic package/qt6/qt6base: add support to link qt to openssl package/qt6/qt6base: add qt icu support package/qt6/qt6base: add qt libudev support package/qt6/qt6base: add qt libglib2 support package/qt6/qt6base: add support for passing custom options package/qt6/qt6base: add support for sql module w/ mysql package/qt6/qt6base: add support for sql module with postgresql package/qt6/qt6base: add support for sql module with sqlite package/qt6/qt6base: add support for gui module package/qt6/qt6base: add support for gui module fontconfig/harfbuzz package/qt6/qt6base: Add support for gui module jpeg/png/gif image
format
package/qt6/qt6base: add support for gui module
widgets/opengl/graphics backends
package/qt6/qt6base: add support for gui module tslib package/qt6/qt6base: add support for gui module libinput package/qt6/qt6base: add support for gui module kms package/qt6/qt6base: add support for gui module printsupport/cups
package/qt6/Config.in | 5 + package/qt6/qt6base/Config.in | 280 +++++++++++++++++++++++++++ package/qt6/qt6base/qt6base.hash | 8 + package/qt6/qt6base/qt6base.mk | 318 +++++++++++++++++++++++++++++++ 4 files changed, 611 insertions(+) create mode 100644 package/qt6/qt6base/qt6base.hash
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 1/29 package/qt6/qt6base: Add qt6base hash file
Hash file with only the qt6base tarball hash
--- package/qt6/qt6base/qt6base.hash | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 package/qt6/qt6base/qt6base.hash
package/qt6/qt6base/qt6base.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Hash from: https://download.qt.io/official_releases/qt/6.3/6.3.1/submodules/qtbase-everywhere-src-6.3.1.tar.xz.sha256 +sha256 0a64421d9c2469c2c48490a032ab91d547017c9cc171f3f8070bc31888f24e03 qtbase-everywhere-src-6.3.1.tar.xz
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 01/29] package/qt6/qt6base: Add qt6base hash file
Quoted 1 line · On Fri, 26 Aug 2022 08:47:30 +0200 Jesse Van Gavere <[email protected]> wrote:
Hash file with only the qt6base tarball hash
We need your Signed-off-by line in all patches. Look at other patches submitted on the list for examples. Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 2/29 package/qt6/qt6base: Add license information
In reply to Jesse Van GavereAdd license hashes to the hash file and add the information into the makefile
--- package/qt6/qt6base/qt6base.hash | 6 ++++++ package/qt6/qt6base/qt6base.mk | 2 ++ 2 files changed, 8 insertions(+)
package/qt6/qt6base/qt6base.hash +6 -0
@@ -1,2 +1,8 @@ # Hash from: https://download.qt.io/official_releases/qt/6.3/6.3.1/submodules/qtbase-everywhere-src-6.3.1.tar.xz.sha256 sha256 0a64421d9c2469c2c48490a032ab91d547017c9cc171f3f8070bc31888f24e03 qtbase-everywhere-src-6.3.1.tar.xz +# Hashes for license files: +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 LICENSE.GPL2 +sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 LICENSE.GPL3 +sha256 0dbe024961f6ab5c52689cbd036c977975d0d0f6a67ff97762d96cb819dd5652 LICENSE.GPL3-EXCEPT +sha256 88ec689407cf2df9b2eb5c45952564d51ce73c129a3bdffb15c0d2d161ad7558 LICENSE.LGPLv3 +sha256 ed8742a95cb9db653a09b050e27ccff5e67ba69c14aa2c3137f2a4e1892f6c0d LICENSE.FDL
package/qt6/qt6base/qt6base.mk +2 -0
@@ -7,6 +7,8 @@ QT6BASE_VERSION = $(QT6_VERSION) QT6BASE_SITE = $(QT6_SITE) QT6BASE_SOURCE = qtbase-$(QT6_SOURCE_TARBALL_PREFIX)-$(QT6BASE_VERSION).tar.xz +QT6BASE_LICENSE = GPL-2.0+ or LGPL-3.0, GPL-3.0 with exception(tools), GFDL-1.3 (docs) +QT6BASE_LICENSE_FILES = LICENSE.GPL2 LICENSE.GPL3 LICENSE.GPL3-EXCEPT LICENSE.LGPLv3 LICENSE.FDL QT6BASE_DEPENDENCIES = \ host-ninja \ host-qt6base \
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 3/29 package/qt6/qt6base: add support for network module
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 9 +++++++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 15 insertions(+)
package/qt6/qt6base/Config.in +9 -0
@@ -14,3 +14,12 @@ config BR2_PACKAGE_QT6BASE QtWidgets, etc. http://qt.io + +if BR2_PACKAGE_QT6BASE + +config BR2_PACKAGE_QT6BASE_NETWORK + bool "network module" + help + This options enables the Qt6Network library. + +endif
package/qt6/qt6base/qt6base.mk +6 -0
@@ -77,5 +77,11 @@ define HOST_QT6BASE_INSTALL_CMDS $(HOST_MAKE_ENV) $(BR2_CMAKE) --install $(HOST_QT6BASE_BUILDDIR) endef +ifeq ($(BR2_PACKAGE_QT6BASE_NETWORK),y) +QT6BASE_CONF_OPTS += -DFEATURE_network=ON +else +QT6BASE_CONF_OPTS += -DFEATURE_network=OFF +endif + $(eval $(cmake-package)) $(eval $(host-cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 4/29 package/qt6/qt6base: add support for concurrent module
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 5 +++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 11 insertions(+)
package/qt6/qt6base/Config.in +5 -0
@@ -22,4 +22,9 @@ config BR2_PACKAGE_QT6BASE_NETWORK help This options enables the Qt6Network library. +config BR2_PACKAGE_QT6BASE_CONCURRENT + bool "concurrent module" + help + This options enables the Qt6Concurrent library. + endif
package/qt6/qt6base/qt6base.mk +6 -0
@@ -83,5 +83,11 @@ else QT6BASE_CONF_OPTS += -DFEATURE_network=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_CONCURRENT),y) +QT6BASE_CONF_OPTS += -DFEATURE_concurrent=ON +else +QT6BASE_CONF_OPTS += -DFEATURE_concurrent=OFF +endif + $(eval $(cmake-package)) $(eval $(host-cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 04/29] package/qt6/qt6base: add support for concurrent module
Quoted 10 lines · On Fri, 26 Aug 2022 08:47:33 +0200 Jesse Van Gavere <[email protected]> wrote:
--- package/qt6/qt6base/Config.in | 5 +++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 11 insertions(+)package/qt6/qt6base/Config.in +0
-0
package/qt6/qt6base/Config.in config BR2_PACKAGE_QT6BASE_NETWORK · line 25
Quoted 4 lines
package/qt6/qt6base/Config.in +1
-0@@ -22,4 +22,9 @@ config BR2_PACKAGE_QT6BASE_NETWORK help This options enables the Qt6Network library. +config BR2_PACKAGE_QT6BASE_CONCURRENT
Please sort options alphabetically, i.e BR2_PACKAGE_QT6BASE_CONCURRENT should be before BR2_PACKAGE_QT6BASE_NETWORK.
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 5/29 package/qt6/qt6base: add support for xml module
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 5 +++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 11 insertions(+)
package/qt6/qt6base/Config.in +5 -0
@@ -27,4 +27,9 @@ config BR2_PACKAGE_QT6BASE_CONCURRENT help This options enables the Qt6Concurrent library. +config BR2_PACKAGE_QT6BASE_XML + bool "XML module" + help + This options enables the Qt6Xml library. + endif
package/qt6/qt6base/qt6base.mk +6 -0
@@ -89,5 +89,11 @@ else QT6BASE_CONF_OPTS += -DFEATURE_concurrent=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_XML),y) +QT6BASE_CONF_OPTS += -DFEATURE_xml=ON +else +QT6BASE_CONF_OPTS += -DFEATURE_xml=OFF +endif + $(eval $(cmake-package)) $(eval $(host-cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 6/29 package/qt6/qt6base: add support for test module
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 5 +++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 11 insertions(+)
package/qt6/qt6base/Config.in +5 -0
@@ -27,6 +27,11 @@ config BR2_PACKAGE_QT6BASE_CONCURRENT help This options enables the Qt6Concurrent library. +config BR2_PACKAGE_QT6BASE_TEST + bool "test module" + help + This options enables the Qt6Test library. + config BR2_PACKAGE_QT6BASE_XML bool "XML module" help
package/qt6/qt6base/qt6base.mk +6 -0
@@ -89,6 +89,12 @@ else QT6BASE_CONF_OPTS += -DFEATURE_concurrent=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_TEST),y) +QT6BASE_CONF_OPTS += -DFEATURE_testlib=ON +else +QT6BASE_CONF_OPTS += -DFEATURE_testlib=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_XML),y) QT6BASE_CONF_OPTS += -DFEATURE_xml=ON else
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 7/29 package/qt6/qt6base: add support for building examples
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 7 +++++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 13 insertions(+)
package/qt6/qt6base/Config.in +7 -0
@@ -17,6 +17,13 @@ config BR2_PACKAGE_QT6BASE if BR2_PACKAGE_QT6BASE +config BR2_PACKAGE_QT6BASE_EXAMPLES + bool "Compile and install examples (with code)" + select BR2_PACKAGE_QT6BASE_NETWORK + select BR2_PACKAGE_QT6BASE_XML + help + If unsure, say N. + config BR2_PACKAGE_QT6BASE_NETWORK bool "network module" help
package/qt6/qt6base/qt6base.mk +6 -0
@@ -77,6 +77,12 @@ define HOST_QT6BASE_INSTALL_CMDS $(HOST_MAKE_ENV) $(BR2_CMAKE) --install $(HOST_QT6BASE_BUILDDIR) endef +ifeq ($(BR2_PACKAGE_QT6BASE_EXAMPLES),y) +QT6BASE_CONF_OPTS += -DQT_BUILD_EXAMPLES=ON +else +QT6BASE_CONF_OPTS += -DQT_BUILD_EXAMPLES=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_NETWORK),y) QT6BASE_CONF_OPTS += -DFEATURE_network=ON else
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 07/29] package/qt6/qt6base: add support for building examples
Quoted 10 lines · On Fri, 26 Aug 2022 08:47:36 +0200 Jesse Van Gavere <[email protected]> wrote:
--- package/qt6/qt6base/Config.in | 7 +++++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 13 insertions(+)package/qt6/qt6base/Config.in +0
-0
package/qt6/qt6base/Config.in config BR2_PACKAGE_QT6BASE · line 21
Quoted 5 lines
package/qt6/qt6base/Config.in +2
-0@@ -17,6 +17,13 @@ config BR2_PACKAGE_QT6BASE if BR2_PACKAGE_QT6BASE +config BR2_PACKAGE_QT6BASE_EXAMPLES + bool "Compile and install examples (with code)"
Did you check that indeed with qt6 examples are still installed with their source code?
package/qt6/qt6base/Config.in config BR2_PACKAGE_QT6BASE · line 23
Quoted 2 lines
package/qt6/qt6base/Config.in +2
-0+ select BR2_PACKAGE_QT6BASE_NETWORK + select BR2_PACKAGE_QT6BASE_XML
Did you check that with qt6 examples indeed need network and xml, and just that?
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 8/29 package/qt6/qt6base: add support for dbus module
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 8 ++++++++ package/qt6/qt6base/qt6base.mk | 11 +++++++++++ 2 files changed, 19 insertions(+)
package/qt6/qt6base/Config.in +8 -0
@@ -44,4 +44,12 @@ config BR2_PACKAGE_QT6BASE_XML help This options enables the Qt6Xml library. +config BR2_PACKAGE_QT6BASE_DBUS + bool "DBus module" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_USE_MMU + select BR2_PACKAGE_DBUS + help + This option enables the D-Bus module. + endif
package/qt6/qt6base/qt6base.mk +11 -0
@@ -77,6 +77,17 @@ define HOST_QT6BASE_INSTALL_CMDS $(HOST_MAKE_ENV) $(BR2_CMAKE) --install $(HOST_QT6BASE_BUILDDIR) endef +ifeq ($(BR2_PACKAGE_QT6BASE_DBUS),y) +QT6BASE_CONF_OPTS += -DFEATURE_dbus=ON +QT6BASE_CONF_OPTS += -DINPUT_dbus=linked +QT6BASE_DEPENDENCIES += dbus +HOST_QT6BASE_CONF_OPTS += -DFEATURE_dbus=ON +HOST_QT6BASE_DEPENDENCIES += host-dbus +else +QT6BASE_CONF_OPTS += -DFEATURE_dbus=OFF +HOST_QT6BASE_CONF_OPTS += -DFEATURE_dbus=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_EXAMPLES),y) QT6BASE_CONF_OPTS += -DQT_BUILD_EXAMPLES=ON else
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 9/29 package/qt6/qt6base: add support for syslog backend
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 5 +++++ package/qt6/qt6base/qt6base.mk | 6 ++++++ 2 files changed, 11 insertions(+)
package/qt6/qt6base/Config.in +5 -0
@@ -44,6 +44,11 @@ config BR2_PACKAGE_QT6BASE_XML help This options enables the Qt6Xml library. +config BR2_PACKAGE_QT6BASE_SYSLOG + bool "syslog support" + help + Logs to the standard UNIX logging mechanism. + config BR2_PACKAGE_QT6BASE_DBUS bool "DBus module" depends on BR2_TOOLCHAIN_HAS_THREADS
package/qt6/qt6base/qt6base.mk +6 -0
@@ -118,5 +118,11 @@ else QT6BASE_CONF_OPTS += -DFEATURE_xml=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_SYSLOG),y) +QT6BASE_CONF_OPTS += -DFEATURE_syslog=ON +else +QT6BASE_CONF_OPTS += -DFEATURE_syslog=OFF +endif + $(eval $(cmake-package)) $(eval $(host-cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 10/29 package/qt6/qt6base: add qt support for journald when using systemd
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 7 +++++++ 1 file changed, 7 insertions(+)
package/qt6/qt6base/qt6base.mk +7 -0
@@ -118,6 +118,13 @@ else QT6BASE_CONF_OPTS += -DFEATURE_xml=OFF endif +ifeq ($(BR2_PACKAGE_SYSTEMD),y) +QT6BASE_CONF_OPTS += -DFEATURE_journald=ON +QT6BASE_DEPENDENCIES += systemd +else +QT6BASE_CONF_OPTS += -DFEATURE_journald=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_SYSLOG),y) QT6BASE_CONF_OPTS += -DFEATURE_syslog=ON else
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 11/29 package/qt6/qt6base: add qt support for zstd when using the package
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 7 +++++++ 1 file changed, 7 insertions(+)
package/qt6/qt6base/qt6base.mk +7 -0
@@ -125,6 +125,13 @@ else QT6BASE_CONF_OPTS += -DFEATURE_journald=OFF endif +ifeq ($(BR2_PACKAGE_ZSTD),y) +QT6BASE_CONF_OPTS += -DFEATURE_zstd=ON +QT6BASE_DEPENDENCIES += zstd +else +QT6BASE_CONF_OPTS += -DFEATURE_zstd=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_SYSLOG),y) QT6BASE_CONF_OPTS += -DFEATURE_syslog=ON else
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 12/29 package/qt6/qt6base: add qt support for SSE/AVX SIMD extensions
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
package/qt6/qt6base/qt6base.mk +19 -0
@@ -35,6 +35,25 @@ QT6BASE_CONF_OPTS = \ -DFEATURE_system_zlib=ON \ -DFEATURE_system_libb2=ON +QT6BASE_CONF_OPTS += -DFEATURE_sse2=$(if $(BR2_X86_CPU_HAS_SSE2),ON,OFF) +QT6BASE_CONF_OPTS += -DFEATURE_sse3=$(if $(BR2_X86_CPU_HAS_SSE3),ON,OFF) +QT6BASE_CONF_OPTS += -DFEATURE_sse4_1=$(if $(BR2_X86_CPU_HAS_SSE4),ON,OFF) +QT6BASE_CONF_OPTS += -DFEATURE_sse4_2=$(if $(BR2_X86_CPU_HAS_SSE42),ON,OFF) +QT6BASE_CONF_OPTS += -DFEATURE_ssse3=$(if $(BR2_X86_CPU_HAS_SSSE3),ON,OFF) +QT6BASE_CONF_OPTS += -DFEATURE_avx=$(if $(BR2_X86_CPU_HAS_AVX),ON,OFF) +QT6BASE_CONF_OPTS += -DFEATURE_avx2=$(if $(BR2_X86_CPU_HAS_AVX2),ON,OFF) +# no buildroot BR2_X86_CPU_HAS_AVX512 option yet +QT6BASE_CONF_OPTS += \ + -DFEATURE_avx512bw=OFF \ + -DFEATURE_avx512cd=OFF \ + -DFEATURE_avx512dq=OFF \ + -DFEATURE_avx512er=OFF \ + -DFEATURE_avx512f=OFF \ + -DFEATURE_avx512ifma=OFF \ + -DFEATURE_avx512pf=OFF \ + -DFEATURE_avx512vbmi=OFF \ + -DFEATURE_avx512vl=OFF + define QT6BASE_BUILD_CMDS $(TARGET_MAKE_ENV) $(BR2_CMAKE) --build $(QT6BASE_BUILDDIR) endef
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 13/29 package/qt6/qt6base: add linking to libatomic
In reply to Jesse Van GavereThis patch might not be necessary for qt6 but I can't find anything indicating so, Yann E. made the original commit for this on qt5 so he might be aware of current necessity
--- package/qt6/qt6base/qt6base.mk | 5 +++++ 1 file changed, 5 insertions(+)
package/qt6/qt6base/qt6base.mk +5 -0
@@ -157,5 +157,10 @@ else QT6BASE_CONF_OPTS += -DFEATURE_syslog=OFF endif +ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) +# Qt needs atomics, which on various architectures are in -latomic +QT6BASE_CONF_OPTS += -DCMAKE_SHARED_LINKER_FLAGS="-latomic" +endif + $(eval $(cmake-package)) $(eval $(host-cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 14/29 package/qt6/qt6base: add support to link qt to openssl
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 8 ++++++++ 1 file changed, 8 insertions(+)
package/qt6/qt6base/qt6base.mk +8 -0
@@ -96,6 +96,14 @@ define HOST_QT6BASE_INSTALL_CMDS $(HOST_MAKE_ENV) $(BR2_CMAKE) --install $(HOST_QT6BASE_BUILDDIR) endef + +ifeq ($(BR2_PACKAGE_OPENSSL),y) +QT6BASE_CONF_OPTS += -DINPUT_openssl=yes +QT6BASE_DEPENDENCIES += openssl +else +QT6BASE_CONF_OPTS += -DINPUT_openssl=no +endif + ifeq ($(BR2_PACKAGE_QT6BASE_DBUS),y) QT6BASE_CONF_OPTS += -DFEATURE_dbus=ON QT6BASE_CONF_OPTS += -DINPUT_dbus=linked
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 15/29 package/qt6/qt6base: add qt icu support
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 15 +++++++++++++++ package/qt6/qt6base/qt6base.mk | 7 +++++++ 2 files changed, 22 insertions(+)
package/qt6/qt6base/Config.in +15 -0
@@ -57,4 +57,19 @@ config BR2_PACKAGE_QT6BASE_DBUS help This option enables the D-Bus module. +config BR2_PACKAGE_QT6BASE_ICU + bool "Enable ICU support" + depends on !BR2_BINFMT_FLAT # icu + depends on BR2_HOST_GCC_AT_LEAST_4_9 # icu + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # icu + select BR2_PACKAGE_ICU + help + This option enables ICU support in Qt6. This is for example + needed for Qt6Webkit. + +comment "icu support needs a toolchain w/ gcc >= 4.9, host gcc >= 4.9" + depends on !BR2_BINFMT_FLAT + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 || \ + !BR2_HOST_GCC_AT_LEAST_4_9 + endif
package/qt6/qt6base/qt6base.mk +7 -0
@@ -115,6 +115,13 @@ QT6BASE_CONF_OPTS += -DFEATURE_dbus=OFF HOST_QT6BASE_CONF_OPTS += -DFEATURE_dbus=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_ICU),y) +QT6BASE_CONF_OPTS += -DFEATURE_icu=ON +QT6BASE_DEPENDENCIES += icu +else +QT6BASE_CONF_OPTS += -DFEATURE_icu=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_EXAMPLES),y) QT6BASE_CONF_OPTS += -DQT_BUILD_EXAMPLES=ON else
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 16/29 package/qt6/qt6base: add qt libudev support
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 6 ++++++ 1 file changed, 6 insertions(+)
package/qt6/qt6base/qt6base.mk +6 -0
@@ -96,6 +96,12 @@ define HOST_QT6BASE_INSTALL_CMDS $(HOST_MAKE_ENV) $(BR2_CMAKE) --install $(HOST_QT6BASE_BUILDDIR) endef +ifeq ($(BR2_PACKAGE_HAS_UDEV),y) +QT6BASE_CONF_OPTS += -DFEATURE_libudev=ON +QT6BASE_DEPENDENCIES += udev +else +QT6BASE_CONF_OPTS += -DFEATURE_libudev=OFF +endif ifeq ($(BR2_PACKAGE_OPENSSL),y) QT6BASE_CONF_OPTS += -DINPUT_openssl=yes
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 17/29 package/qt6/qt6base: add qt libglib2 support
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 7 +++++++ 1 file changed, 7 insertions(+)
package/qt6/qt6base/qt6base.mk +7 -0
@@ -121,6 +121,13 @@ QT6BASE_CONF_OPTS += -DFEATURE_dbus=OFF HOST_QT6BASE_CONF_OPTS += -DFEATURE_dbus=OFF endif +ifeq ($(BR2_PACKAGE_LIBGLIB2),y) +QT6BASE_CONF_OPTS += -DFEATURE_glib=ON +QT6BASE_DEPENDENCIES += libglib2 +else +QT6BASE_CONF_OPTS += -DFEATURE_glib=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_ICU),y) QT6BASE_CONF_OPTS += -DFEATURE_icu=ON QT6BASE_DEPENDENCIES += icu
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 18/29 package/qt6/qt6base: add support for passing custom options
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 10 ++++++++++ package/qt6/qt6base/qt6base.mk | 3 +++ 2 files changed, 13 insertions(+)
package/qt6/qt6base/Config.in +10 -0
@@ -17,6 +17,16 @@ config BR2_PACKAGE_QT6BASE if BR2_PACKAGE_QT6BASE +config BR2_PACKAGE_QT6BASE_CUSTOM_CONF_OPTS + string "Custom configuration options" + help + Define custom qt6 configuration options which can be used to + enable or disable options not managed by buildroot. These + options are appended to the ones generated by buildroot and + passed to qt6base during configuration. + + Use cmake style '-Doption_name=ON' or -Doption_name=OFF'. + config BR2_PACKAGE_QT6BASE_EXAMPLES bool "Compile and install examples (with code)" select BR2_PACKAGE_QT6BASE_NETWORK
package/qt6/qt6base/qt6base.mk +3 -0
@@ -190,5 +190,8 @@ ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y) QT6BASE_CONF_OPTS += -DCMAKE_SHARED_LINKER_FLAGS="-latomic" endif +# Must be last so can override all options set by Buildroot +QT6BASE_CONF_OPTS += $(call qstrip,$(BR2_PACKAGE_QT6BASE_CUSTOM_CONF_OPTS)) + $(eval $(cmake-package)) $(eval $(host-cmake-package))
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 19/29 package/qt6/qt6base: add support for sql module w/ mysql
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 18 ++++++++++++++++++ package/qt6/qt6base/qt6base.mk | 16 ++++++++++++++++ 2 files changed, 34 insertions(+)
package/qt6/qt6base/Config.in +18 -0
@@ -44,6 +44,24 @@ config BR2_PACKAGE_QT6BASE_CONCURRENT help This options enables the Qt6Concurrent library. +config BR2_PACKAGE_QT6BASE_SQL + bool "sql module" + help + This options enables the Qt6Sql library. + +if BR2_PACKAGE_QT6BASE_SQL +config BR2_PACKAGE_QT6BASE_MYSQL + bool "MySQL Plugin" + depends on BR2_USE_MMU # mysql + select BR2_PACKAGE_MYSQL + select BR2_PACKAGE_NCURSES + select BR2_PACKAGE_READLINE + help + Build MySQL plugin + If unsure, say n. + +endif + config BR2_PACKAGE_QT6BASE_TEST bool "test module" help
package/qt6/qt6base/qt6base.mk +16 -0
@@ -103,6 +103,22 @@ else QT6BASE_CONF_OPTS += -DFEATURE_libudev=OFF endif +# Qt6 SQL Plugins +ifeq ($(BR2_PACKAGE_QT6BASE_SQL),y) +QT6BASE_CONF_OPTS += -DFEATURE_sql=ON +QT6BASE_CONF_OPTS += -DFEATURE_sql_db2=OFF -DFEATURE_sql_ibase=OFF -DFEATURE_sql_oci=OFF -DFEATURE_sql_odbc=OFF + +ifeq ($(BR2_PACKAGE_QT6BASE_MYSQL),y) +QT6BASE_CONF_OPTS += -DFEATURE_sql_mysql=ON +QT6BASE_DEPENDENCIES += mysql +else +QT6BASE_CONF_OPTS += -DFEATURE_sql_mysql=OFF +endif + +else +QT6BASE_CONF_OPTS += -DFEATURE_sql=OFF +endif + ifeq ($(BR2_PACKAGE_OPENSSL),y) QT6BASE_CONF_OPTS += -DINPUT_openssl=yes QT6BASE_DEPENDENCIES += openssl
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 20/29 package/qt6/qt6base: add support for sql module with postgresql
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 14 ++++++++++++++ package/qt6/qt6base/qt6base.mk | 7 +++++++ 2 files changed, 21 insertions(+)
package/qt6/qt6base/Config.in +14 -0
@@ -60,6 +60,20 @@ config BR2_PACKAGE_QT6BASE_MYSQL Build MySQL plugin If unsure, say n. +config BR2_PACKAGE_QT6BASE_PSQL + bool "PostgreSQL Plugin" + depends on BR2_USE_MMU # postgresql + depends on !BR2_STATIC_LIBS + depends on BR2_USE_WCHAR # postgresql + select BR2_PACKAGE_POSTGRESQL + help + Build PostgreSQL plugin + If unsure, say n. + +comment "PostgreSQL plugin needs a toolchain w/ wchar, dynamic library" + depends on BR2_USE_MMU + depends on BR2_STATIC_LIBS || !BR2_USE_WCHAR + endif config BR2_PACKAGE_QT6BASE_TEST
package/qt6/qt6base/qt6base.mk +7 -0
@@ -115,6 +115,13 @@ else QT6BASE_CONF_OPTS += -DFEATURE_sql_mysql=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_PSQL),y) +QT6BASE_CONF_OPTS += -DFEATURE_sql_psql=ON +QT6BASE_DEPENDENCIES += postgresql +else +QT6BASE_CONF_OPTS += -DFEATURE_sql_psql=OFF +endif + else QT6BASE_CONF_OPTS += -DFEATURE_sql=OFF endif
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 21/29 package/qt6/qt6base: add support for sql module with sqlite
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 25 +++++++++++++++++++++++++ package/qt6/qt6base/qt6base.mk | 9 +++++++++ 2 files changed, 34 insertions(+)
package/qt6/qt6base/Config.in +25 -0
@@ -74,6 +74,31 @@ comment "PostgreSQL plugin needs a toolchain w/ wchar, dynamic library" depends on BR2_USE_MMU depends on BR2_STATIC_LIBS || !BR2_USE_WCHAR +choice + prompt "SQLite 3 support" + default BR2_PACKAGE_QT6BASE_SQLITE_NONE + help + Select SQLite support. + +config BR2_PACKAGE_QT6BASE_SQLITE_NONE + bool "No sqlite support" + help + Do not compile any kind of SQLite support. + +config BR2_PACKAGE_QT6BASE_SQLITE_QT + bool "Qt SQLite" + help + Use Qt bundled SQLite support. + +config BR2_PACKAGE_QT6BASE_SQLITE_SYSTEM + bool "System SQLite" + select BR2_PACKAGE_SQLITE + select BR2_PACKAGE_SQLITE_ENABLE_COLUMN_METADATA + help + Use system SQLite. + +endchoice + endif config BR2_PACKAGE_QT6BASE_TEST
package/qt6/qt6base/qt6base.mk +9 -0
@@ -122,6 +122,15 @@ else QT6BASE_CONF_OPTS += -DFEATURE_sql_psql=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_SQLITE_SYSTEM),y) +QT6BASE_CONF_OPTS += -DFEATURE_sql_sqlite=ON -DFEATURE_system_sqlite=ON +QT6BASE_DEPENDENCIES += sqlite +else ifeq ($(BR2_PACKAGE_QT6BASE_SQLITE_QT),y) +QT6BASE_CONF_OPTS += -DFEATURE_sql_sqlite=ON -DFEATURE_system_sqlite=OFF +else +QT6BASE_CONF_OPTS += -DFEATURE_sql_sqlite=OFF +endif + else QT6BASE_CONF_OPTS += -DFEATURE_sql=OFF endif
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 22/29 package/qt6/qt6base: add support for gui module
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 6 ++++++ package/qt6/qt6base/qt6base.mk | 8 ++++++++ 2 files changed, 14 insertions(+)
package/qt6/qt6base/Config.in +6 -0
@@ -111,6 +111,12 @@ config BR2_PACKAGE_QT6BASE_XML help This options enables the Qt6Xml library. +config BR2_PACKAGE_QT6BASE_GUI + bool "gui module" + select BR2_PACKAGE_FREETYPE + help + This option enables the Qt6Gui library. + config BR2_PACKAGE_QT6BASE_SYSLOG bool "syslog support" help
package/qt6/qt6base/qt6base.mk +8 -0
@@ -135,6 +135,14 @@ else QT6BASE_CONF_OPTS += -DFEATURE_sql=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_GUI),y) +QT6BASE_CONF_OPTS += -DFEATURE_gui=ON -DFEATURE_freetype=ON -DINPUT_opengl=no -DFEATURE_vulkan=OFF +QT6BASE_DEPENDENCIES += freetype + +else +QT6BASE_CONF_OPTS += -DFEATURE_gui=OFF +endif + ifeq ($(BR2_PACKAGE_OPENSSL),y) QT6BASE_CONF_OPTS += -DINPUT_openssl=yes QT6BASE_DEPENDENCIES += openssl
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 23/29 package/qt6/qt6base: add support for gui module fontconfig/harfbuzz
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 21 +++++++++++++++++++++ package/qt6/qt6base/qt6base.mk | 23 +++++++++++++++++++++++ 2 files changed, 44 insertions(+)
package/qt6/qt6base/Config.in +21 -0
@@ -117,6 +117,27 @@ config BR2_PACKAGE_QT6BASE_GUI help This option enables the Qt6Gui library. +if BR2_PACKAGE_QT6BASE_GUI + +config BR2_PACKAGE_QT6BASE_FONTCONFIG + bool "fontconfig support" + select BR2_PACKAGE_FONTCONFIG + help + This option enables Fontconfig and Freetype support using + the system fontconfig and freetype2 libraries. + +config BR2_PACKAGE_QT6BASE_HARFBUZZ + bool "harfbuzz support" + select BR2_PACKAGE_HARFBUZZ if \ + BR2_TOOLCHAIN_HAS_SYNC_4 && \ + BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 + help + This option enables HarfBuzz support (either system harfbuzz + if the toolchain supports __sync for 4 bytes, or the qt + provided one which avoids this dependency by using QAtomic). + +endif + config BR2_PACKAGE_QT6BASE_SYSLOG bool "syslog support" help
package/qt6/qt6base/qt6base.mk +23 -0
@@ -139,6 +139,29 @@ ifeq ($(BR2_PACKAGE_QT6BASE_GUI),y) QT6BASE_CONF_OPTS += -DFEATURE_gui=ON -DFEATURE_freetype=ON -DINPUT_opengl=no -DFEATURE_vulkan=OFF QT6BASE_DEPENDENCIES += freetype +ifeq ($(BR2_PACKAGE_QT6BASE_HARFBUZZ),y) +QT6BASE_CONF_OPTS += -DFEATURE_harfbuzz=ON +ifeq ($(BR2_TOOLCHAIN_HAS_SYNC_4),y) +# system harfbuzz in case __sync for 4 bytes is supported +QT6BASE_CONF_OPTS += -DQT_USE_BUNDLED_BundledHarfbuzz=OFF +QT6BASE_DEPENDENCIES += harfbuzz +else #BR2_TOOLCHAIN_HAS_SYNC_4 +# qt harfbuzz otherwise (using QAtomic instead) +QT6BASE_CONF_OPTS += -DQT_USE_BUNDLED_BundledHarfbuzz=ON +QT6BASE_LICENSE += , MIT (harfbuzz) +QT6BASE_LICENSE_FILES += src/3rdparty/harfbuzz-ng/COPYING +endif +else +QT6BASE_CONF_OPTS += -DFEATURE_harfbuzz=OFF +endif + +ifeq ($(BR2_PACKAGE_QT6BASE_FONTCONFIG),y) +QT6BASE_CONF_OPTS += -DFEATURE_fontconfig=ON +QT6BASE_DEPENDENCIES += fontconfig +else +QT6BASE_CONF_OPTS += -DFEATURE_fontconfig=OFF +endif + else QT6BASE_CONF_OPTS += -DFEATURE_gui=OFF endif
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 24/29 package/qt6/qt6base: Add support for gui module jpeg/png/gif image format
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 19 +++++++++++++++++++ package/qt6/qt6base/qt6base.mk | 20 ++++++++++++++++++++ 2 files changed, 39 insertions(+)
package/qt6/qt6base/Config.in +19 -0
@@ -136,6 +136,25 @@ config BR2_PACKAGE_QT6BASE_HARFBUZZ if the toolchain supports __sync for 4 bytes, or the qt provided one which avoids this dependency by using QAtomic). +config BR2_PACKAGE_QT6BASE_GIF + bool "GIF support" + help + This compiles and installs the plugin for GIF reading support. + +config BR2_PACKAGE_QT6BASE_JPEG + bool "JPEG support" + select BR2_PACKAGE_JPEG + help + This option enables JPEG support using the system libjpeg + library. + +config BR2_PACKAGE_QT6BASE_PNG + bool "PNG support" + select BR2_PACKAGE_LIBPNG + help + This option enables PNG support using the system libpng + library. + endif config BR2_PACKAGE_QT6BASE_SYSLOG
package/qt6/qt6base/qt6base.mk +20 -0
@@ -155,6 +155,26 @@ else QT6BASE_CONF_OPTS += -DFEATURE_harfbuzz=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_PNG),y) +QT6BASE_CONF_OPTS += -DFEATURE_png=ON -DFEATURE_system_png=ON +QT6BASE_DEPENDENCIES += libpng +else +QT6BASE_CONF_OPTS += -DFEATURE_png=OFF +endif + +ifeq ($(BR2_PACKAGE_QT6BASE_GIF),y) +QT6BASE_CONF_OPTS += -DFEATURE_gif=ON +else +QT6BASE_CONF_OPTS += -DFEATURE_gif=OFF +endif + +ifeq ($(BR2_PACKAGE_QT6BASE_JPEG),y) +QT6BASE_CONF_OPTS += -DFEATURE_jpeg=ON +QT6BASE_DEPENDENCIES += jpeg +else +QT6BASE_CONF_OPTS += -DFEATURE_jpeg=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_FONTCONFIG),y) QT6BASE_CONF_OPTS += -DFEATURE_fontconfig=ON QT6BASE_DEPENDENCIES += fontconfig
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 25/29 package/qt6/qt6base: add support for gui module widgets/opengl/graphics backends
In reply to Jesse Van GavereThis is a rather large patch as most of these options interact with each other one way or another, so it's very difficult to split it much further into sensible patches that still work
--- package/qt6/Config.in | 5 ++ package/qt6/qt6base/Config.in | 98 ++++++++++++++++++++++++++++++++++ package/qt6/qt6base/qt6base.mk | 84 +++++++++++++++++++++++++++++ 3 files changed, 187 insertions(+)
package/qt6/Config.in +5 -0
@@ -12,6 +12,11 @@ config BR2_PACKAGE_QT6_ARCH_SUPPORTS default y if BR2_sparc64 depends on BR2_USE_MMU +config BR2_PACKAGE_QT6_GL_AVAILABLE + bool + default y + depends on BR2_PACKAGE_HAS_LIBGL || BR2_PACKAGE_HAS_LIBGLES + comment "qt6 needs a toolchain w/ C++, threads, wchar, dynamic library, gcc >= 8, host gcc >= 8" depends on !BR2_PACKAGE_QT5 depends on BR2_PACKAGE_QT6_ARCH_SUPPORTS
package/qt6/qt6base/Config.in +98 -0
109 lines not on this page · raw message
package/qt6/qt6base/qt6base.mk +84 -0
94 lines not on this page · raw message
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 26/29 package/qt6/qt6base: add support for gui module tslib
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 6 ++++++ package/qt6/qt6base/qt6base.mk | 8 ++++++++ 2 files changed, 14 insertions(+)
package/qt6/qt6base/Config.in +6 -0
@@ -283,4 +283,10 @@ comment "icu support needs a toolchain w/ gcc >= 4.9, host gcc >= 4.9" depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 || \ !BR2_HOST_GCC_AT_LEAST_4_9 +config BR2_PACKAGE_QT6BASE_TSLIB + bool "Enable Tslib support" + select BR2_PACKAGE_TSLIB + help + This options enables the Tslib plugin + endif
package/qt6/qt6base/qt6base.mk +8 -0
@@ -206,6 +206,14 @@ else QT6BASE_CONF_OPTS += -DFEATURE_eglfs=OFF endif + +ifeq ($(BR2_PACKAGE_QT6BASE_TSLIB),y) +QT6BASE_CONF_OPTS += -DFEATURE_tslib=ON +QT6BASE_DEPENDENCIES += tslib +else +QT6BASE_CONF_OPTS += -DFEATURE_tslib=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_OPENGL_DESKTOP),y) QT6BASE_CONF_OPTS += -DFEATURE_opengl=ON -DFEATURE_opengl_desktop=ON QT6BASE_DEPENDENCIES += libgl
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 27/29 package/qt6/qt6base: add support for gui module libinput
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 6 ++++++ 1 file changed, 6 insertions(+)
package/qt6/qt6base/qt6base.mk +6 -0
@@ -206,6 +206,12 @@ else QT6BASE_CONF_OPTS += -DFEATURE_eglfs=OFF endif +ifeq ($(BR2_PACKAGE_LIBINPUT),y) +QT6BASE_CONF_OPTS += -DFEATURE_libinput=ON +QT6BASE_DEPENDENCIES += libinput +else +QT6BASE_CONF_OPTS += -DFEATURE_libinput=OFF +endif ifeq ($(BR2_PACKAGE_QT6BASE_TSLIB),y) QT6BASE_CONF_OPTS += -DFEATURE_tslib=ON
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 28/29 package/qt6/qt6base: add support for gui module kms
In reply to Jesse Van Gavere--- package/qt6/qt6base/qt6base.mk | 7 +++++++ 1 file changed, 7 insertions(+)
package/qt6/qt6base/qt6base.mk +7 -0
@@ -175,6 +175,13 @@ else QT6BASE_CONF_OPTS += -DFEATURE_jpeg=OFF endif +ifeq ($(BR2_PACKAGE_LIBDRM),y) +QT6BASE_CONF_OPTS += -DFEATURE_kms=ON +QT6BASE_DEPENDENCIES += libdrm +else +QT6BASE_CONF_OPTS += -DFEATURE_kms=OFF +endif + ifeq ($(BR2_PACKAGE_QT6BASE_FONTCONFIG),y) QT6BASE_CONF_OPTS += -DFEATURE_fontconfig=ON QT6BASE_DEPENDENCIES += fontconfig
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 29/29 package/qt6/qt6base: add support for gui module printsupport/cups
In reply to Jesse Van Gavere--- package/qt6/qt6base/Config.in | 4 ++++ package/qt6/qt6base/qt6base.mk | 12 ++++++++++++ 2 files changed, 16 insertions(+)
package/qt6/qt6base/Config.in +4 -0
@@ -217,6 +217,10 @@ config BR2_PACKAGE_QT6BASE_DEFAULT_QPA target. You can choose a different platform at runtime with the -platform option. +config BR2_PACKAGE_QT6BASE_PRINTSUPPORT + depends on BR2_PACKAGE_QT6BASE_WIDGETS + def_bool y + config BR2_PACKAGE_QT6BASE_FONTCONFIG bool "fontconfig support" select BR2_PACKAGE_FONTCONFIG
package/qt6/qt6base/qt6base.mk +12 -0
@@ -175,6 +175,18 @@ else QT6BASE_CONF_OPTS += -DFEATURE_jpeg=OFF endif +ifeq ($(BR2_PACKAGE_QT6BASE_PRINTSUPPORT), y) +QT6BASE_CONF_OPTS += -DFEATURE_printsupport=ON +ifeq ($(BR2_PACKAGE_CUPS), y) +QT6BASE_CONF_OPTS += -DFEATURE_cups=ON +QT6BASE_DEPENDENCIES += cups +else +QT6BASE_CONF_OPTS += -DFEATURE_cups=OFF +endif +else +QT6BASE_CONF_OPTS += -DFEATURE_printsupport=OFF +endif + ifeq ($(BR2_PACKAGE_LIBDRM),y) QT6BASE_CONF_OPTS += -DFEATURE_kms=ON QT6BASE_DEPENDENCIES += libdrm
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot