Skip to contentSkip to conversation

term/serial: Add PCI-serial device support

PATCH In review [email protected] 5 participants 17 messages Aug 26, 2022 – Feb 14, 2023

lore
Share & tools
lore
#0 lore raw

v2 cover term/serial: Add PCI-serial device support

Hi!

A small collection of patches that adds PCI serial support.

The first patch is by Glenn and adds GRUB_HAS_PCI -- it is included so that it is a complete posting.

The second patch is the actual PCI serial support, and the last patch a cleanup requested by Glenn.

Much thanks to Glenn for all the feedback so far.

#1 lore raw

PATCH v2 1/3 configure: Add -DGRUB_HAS_PCI when compiling C/C++ files on targets that support PCI

From: Glenn Washburn <[email protected]>

The list of targets that support PCI is in gentpl.py. However, there is no support for generating makefile script from a .def file that will apply globally to the makefile, but on a per target basis. So instead, use gentpl.py in configure to get the list of targets and check if the current build target is one of them. If it is, set the automake conditional COND_HAVE_PCI. Then in conf/Makefile.common add -DGRUB_HAS_PCI for the platform if COND_HAVE_PCI is true.

---
 conf/Makefile.common | 3 +++
 configure.ac         | 6 ++++++
 2 files changed, 9 insertions(+)
conf/Makefile.common +3 -0
index 2d8f1bf2e8..f8faa92e92 100644
@@ -20,6 +20,9 @@ endif
 if COND_powerpc_ieee1275
   CFLAGS_PLATFORM += -mcpu=powerpc
 endif
+if COND_HAVE_PCI
+  CFLAGS_PLATFORM += -DGRUB_HAS_PCI
+endif
 
 # Other options
 
configure.ac +6 -0
index 90f686f799..1348b06a98 100644
@@ -375,6 +375,11 @@ AM_GNU_GETTEXT([external])
 AM_GNU_GETTEXT_VERSION([0.18.3])
 AC_SYS_LARGEFILE
 
+PLATFORMS_PCI=" $(PYTHONPATH="${srcdir}" $PYTHON -c 'import gentpl; print(" ".join(gentpl.GROUPS[["pci"]]))') "
+if test x"${PLATFORMS_PCI##* ${target_cpu}_${platform} *}" = x ; then
+  have_pci=y
+fi
+
 # Identify characteristics of the host architecture.
 unset ac_cv_c_bigendian
 
@@ -2042,6 +2047,7 @@ AM_CONDITIONAL([COND_HAVE_CXX], [test x$HAVE_CXX = xyes])
 AM_CONDITIONAL([COND_HAVE_ASM_USCORE], [test x$HAVE_ASM_USCORE = x1])
 AM_CONDITIONAL([COND_STARFIELD], [test "x$starfield_excuse" = x])
 AM_CONDITIONAL([COND_HAVE_EXEC], [test "x$have_exec" = xy])
+AM_CONDITIONAL([COND_HAVE_PCI], [test "x$have_pci" = xy])
 
 test "x$prefix" = xNONE && prefix="$ac_default_prefix"
 test "x$exec_prefix" = xNONE && exec_prefix="${prefix}"
Signature · 1 line
2.34.1
#2 lore raw

PATCH v2 2/3 term/serial: Add support for PCI serial devices

In reply to [email protected]

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

From which the following config (/etc/default/grub) gets a working serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --port=0x40a0 --speed=115200" GRUB_TERMINAL="serial console"

---

grub-core/Makefile.core.def +1 -0
Index: grub/grub-core/Makefile.core.def
===================================================================
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
   enable = terminfomodule;
   enable = ieee1275;
grub-core/term/pci/serial.c new file +95 -0

95 lines not on this page · raw message

grub-core/term/serial.c +3 -0
Index: grub/grub-core/term/serial.c
===================================================================
@@ -448,6 +448,9 @@ GRUB_MOD_INIT(serial)
 #ifdef GRUB_MACHINE_ARC
   grub_arcserial_init ();
 #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
 }
 
 GRUB_MOD_FINI(serial)
include/grub/pci.h +5 -0
Index: grub/include/grub/pci.h
===================================================================
@@ -80,8 +80,13 @@
 
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
 #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
 #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
 #ifndef ASM_FILE
 
include/grub/serial.h +4 -0
Index: grub/include/grub/serial.h
===================================================================
@@ -193,6 +193,10 @@ const char *
 grub_arcserial_add_port (const char *path);
 #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
 struct grub_serial_port *grub_serial_find (const char *name);
 extern struct grub_serial_driver grub_ns8250_driver;
 void EXPORT_FUNC(grub_serial_unregister_driver) (struct grub_serial_driver *driver);
Reviewed-by on v2 2/3
#3 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 24 lines · On Fri, 26 Aug 2022 13:01:44 +0200 [email protected] wrote:

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

Quoted 5 lines
Quoted 1 line

From which the following config (/etc/default/grub) gets a working

serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --port=0x40a0 --speed=115200"

Forgive my ignorance, I'm a bit confused why the above line does not work without the patch, or does it? Is it because the line "grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);" was needed to enable that IO port?

Either way, I think it would be better to example would be something like:

  GRUB_SERIAL_COMMAND="serial --speed=115200 pci0"

Otherwise, LGTM.

Glenn

Quoted 166 lines

GRUB_TERMINAL="serial console"

---

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
   enable = terminfomodule;
   enable = ieee1275;

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c new file +95 -0
@@ -0,0 +1,95 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2022  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <grub/serial.h>
+#include <grub/term.h>
+#include <grub/types.h>
+#include <grub/pci.h>
+#include <grub/mm.h>
+#include <grub/misc.h>
+
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void *data)
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;
+
+  cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
+  cmdreg = grub_pci_read (cmd_addr);
+
+  class_addr = grub_pci_make_address (dev, GRUB_PCI_REG_REVISION);
+  class = grub_pci_read (class_addr);
+
+  bar_addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+  bar = grub_pci_read (bar_addr);
+
+  /* 16550 compattible MODEM or SERIAL */
+  if (((class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_MODEM &&
+       (class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_SERIAL) ||
+      ((class >> 8) & 0xff) != GRUB_PCI_SERIAL_16550_COMPATIBLE)
+    return 0;
+
+  if ((bar & GRUB_PCI_ADDR_SPACE_MASK) != GRUB_PCI_ADDR_SPACE_IO)
+    return 0;
+
+  port = grub_zalloc (sizeof (*port));
+  if (port == NULL)
+    return 0;
+
+  port->name = grub_xasprintf ("pci%d", (*port_num));
+  if (port->name == NULL)
+    goto error;
+
+  grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);
+
+  port->driver = &grub_ns8250_driver;
+  port->port = bar & GRUB_PCI_ADDR_IO_MASK;
+  err = grub_serial_config_defaults (port);
+  if (err != GRUB_ERR_NONE)
+    {
+      grub_print_error ();
+      goto error;
+    }
+
+  err = grub_serial_register (port);
+  if (err != GRUB_ERR_NONE)
+    goto error;
+
+  (*port_num)++;
+
+  return 0;
+
+error:
+  grub_free (port->name);
+  grub_free (port);
+  return 0;
+}
+
+void
+grub_pciserial_init (void)
+{
+  int port_num;
+
+  grub_pci_iterate (find_pciserial, &port_num);
+}

Index: grub/grub-core/term/serial.c
===================================================================

grub-core/term/serial.c +3 -0
@@ -448,6 +448,9 @@ GRUB_MOD_INIT(serial)
 #ifdef GRUB_MACHINE_ARC
   grub_arcserial_init ();
 #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
 }
 
 GRUB_MOD_FINI(serial)

Index: grub/include/grub/pci.h
===================================================================

include/grub/pci.h +5 -0
@@ -80,8 +80,13 @@
 
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
 #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
 #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
 #ifndef ASM_FILE
 

Index: grub/include/grub/serial.h
===================================================================

include/grub/serial.h +4 -0
@@ -193,6 +193,10 @@ const char *
 grub_arcserial_add_port (const char *path);
 #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
 struct grub_serial_port *grub_serial_find (const char *name);
 extern struct grub_serial_driver grub_ns8250_driver;
 void EXPORT_FUNC(grub_serial_unregister_driver) (struct grub_serial_driver *driver);
#4 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 30 lines · Glenn Washburn
Quoted 27 lines · On Fri, 26 Aug 2022 13:01:44 +0200 [email protected] wrote:

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

Quoted 1 line

From which the following config (/etc/default/grub) gets a working

serial setup:

Quoted 7 lines
Quoted 2 lines

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --port=0x40a0 --speed=115200"

Forgive my ignorance, I'm a bit confused why the above line does not work without the patch, or does it? Is it because the line "grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);" was needed to enable that IO port?

Correct. Without that the IO port doesn't function and life is sad :-)

Quoted 4 lines

Either way, I think it would be better to example would be something like:

  GRUB_SERIAL_COMMAND="serial --speed=115200 pci0"

This made me think the below delta might be a better option. Then we could write:

   GRUB_SERIAL_COMMAND="serial --speed=115200 pci,00:16.3"

Hmm?

---

grub-core/term/pci/serial.c +6 -7
Index: grub/grub-core/term/pci/serial.c
===================================================================
@@ -30,10 +30,10 @@ find_pciserial (grub_pci_device_t dev, g
   struct grub_serial_port *port;
   grub_uint32_t class, bar;
   grub_uint16_t cmdreg;
-  int *port_num = data;
   grub_err_t err;
 
   (void)pciid;
+  (void)data;
 
   cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
   cmdreg = grub_pci_read (cmd_addr);
@@ -57,7 +57,10 @@ find_pciserial (grub_pci_device_t dev, g
   if (port == NULL)
     return 0;
 
-  port->name = grub_xasprintf ("pci%d", (*port_num));
+  port->name = grub_xasprintf ("pci,%02x:%02x.%x",
+			       grub_pci_get_bus (dev),
+			       grub_pci_get_device (dev),
+			       grub_pci_get_function (dev));
   if (port->name == NULL)
     goto error;
 
@@ -76,8 +79,6 @@ find_pciserial (grub_pci_device_t dev, g
   if (err != GRUB_ERR_NONE)
     goto error;
 
-  (*port_num)++;
-
   return 0;
 
 error:
@@ -89,7 +90,5 @@ error:
 void
 grub_pciserial_init (void)
 {
-  int port_num;
-
-  grub_pci_iterate (find_pciserial, &port_num);
+  grub_pci_iterate (find_pciserial, NULL);
 }
#5 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 44 lines · On Mon, 29 Aug 2022 12:53:54 +0200 Peter Zijlstra <[email protected]> wrote:
Quoted 30 lines · Glenn Washburn
Quoted 27 lines · On Fri, 26 Aug 2022 13:01:44 +0200 [email protected] wrote:

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

Quoted 1 line

From which the following config (/etc/default/grub) gets a working

serial setup:

Quoted 7 lines
Quoted 2 lines

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --port=0x40a0 --speed=115200"

Forgive my ignorance, I'm a bit confused why the above line does not work without the patch, or does it? Is it because the line "grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);" was needed to enable that IO port?

Correct. Without that the IO port doesn't function and life is sad :-)

Quoted 3 lines

Either way, I think it would be better to example would be something like:

Quoted 8 lines
Quoted 1 line
  GRUB_SERIAL_COMMAND="serial --speed=115200 pci0"

This made me think the below delta might be a better option. Then we could write:

   GRUB_SERIAL_COMMAND="serial --speed=115200 pci,00:16.3"

Hmm?

Hmm, I like this idea because its more descriptive for the user. I don't particularly like the comma separator. Perhaps dash, underscore, or forward slash are better or maybe no separator at all. I also don't feel that strongly about it.

Glenn

Quoted 49 lines

---

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c +6 -7
@@ -30,10 +30,10 @@ find_pciserial (grub_pci_device_t dev, g
   struct grub_serial_port *port;
   grub_uint32_t class, bar;
   grub_uint16_t cmdreg;
-  int *port_num = data;
   grub_err_t err;
 
   (void)pciid;
+  (void)data;
 
   cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
   cmdreg = grub_pci_read (cmd_addr);
@@ -57,7 +57,10 @@ find_pciserial (grub_pci_device_t dev, g
   if (port == NULL)
     return 0;
 
-  port->name = grub_xasprintf ("pci%d", (*port_num));
+  port->name = grub_xasprintf ("pci,%02x:%02x.%x",
+			       grub_pci_get_bus (dev),
+			       grub_pci_get_device (dev),
+			       grub_pci_get_function (dev));
   if (port->name == NULL)
     goto error;
 
@@ -76,8 +79,6 @@ find_pciserial (grub_pci_device_t dev, g
   if (err != GRUB_ERR_NONE)
     goto error;
 
-  (*port_num)++;
-
   return 0;
 
 error:
@@ -89,7 +90,5 @@ error:
 void
 grub_pciserial_init (void)
 {
-  int port_num;
-
-  grub_pci_iterate (find_pciserial, &port_num);
+  grub_pci_iterate (find_pciserial, NULL);
 }
#6 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

In reply to [email protected]

Sorry for late reply...

May I ask you to send the patches using "git send-email"?

Quoted 24 lines · On Fri, Aug 26, 2022 at 01:01:44PM +0200, [email protected] wrote:

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

Quoted 5 lines
Quoted 1 line

From which the following config (/etc/default/grub) gets a working

serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --port=0x40a0 --speed=115200"

Please add a blurb how to use this driver to the docs/grub.texi file.

Quoted 10 lines

GRUB_TERMINAL="serial console"

---

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def module = { · line 2050

Quoted 4 lines
grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;

I think this should be "x86 = term/pci/serial.c".

Quoted 25 lines
grub-core/Makefile.core.def +0 -0
   enable = terminfomodule;
   enable = ieee1275;

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c new file +17 -0
@@ -0,0 +1,95 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2022  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */

grub-core/term/pci/serial.c line 27

Quoted 10 lines
grub-core/term/pci/serial.c new file +10 -0
+
+#include <grub/serial.h>
+#include <grub/term.h>
+#include <grub/types.h>
+#include <grub/pci.h>
+#include <grub/mm.h>
+#include <grub/misc.h>
+
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void *data)

grub_pci_id_t pciid __attribute__ ((unused))

grub-core/term/pci/serial.c line 36

Quoted 9 lines
grub-core/term/pci/serial.c new file +9 -0
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;

... and please drop this...

Quoted 36 lines
grub-core/term/pci/serial.c new file +36 -0
+  cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
+  cmdreg = grub_pci_read (cmd_addr);
+
+  class_addr = grub_pci_make_address (dev, GRUB_PCI_REG_REVISION);
+  class = grub_pci_read (class_addr);
+
+  bar_addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+  bar = grub_pci_read (bar_addr);
+
+  /* 16550 compattible MODEM or SERIAL */
+  if (((class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_MODEM &&
+       (class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_SERIAL) ||
+      ((class >> 8) & 0xff) != GRUB_PCI_SERIAL_16550_COMPATIBLE)
+    return 0;
+
+  if ((bar & GRUB_PCI_ADDR_SPACE_MASK) != GRUB_PCI_ADDR_SPACE_IO)
+    return 0;
+
+  port = grub_zalloc (sizeof (*port));
+  if (port == NULL)
+    return 0;
+
+  port->name = grub_xasprintf ("pci%d", (*port_num));
+  if (port->name == NULL)
+    goto error;
+
+  grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);
+
+  port->driver = &grub_ns8250_driver;
+  port->port = bar & GRUB_PCI_ADDR_IO_MASK;
+  err = grub_serial_config_defaults (port);
+  if (err != GRUB_ERR_NONE)
+    {
+      grub_print_error ();
+      goto error;
+    }

grub-core/term/pci/serial.c line 83

Quoted 10 lines
grub-core/term/pci/serial.c new file +10 -0
+
+  err = grub_serial_register (port);
+  if (err != GRUB_ERR_NONE)
+    goto error;
+
+  (*port_num)++;
+
+  return 0;
+
+error:

s/error/fail/

And please add a space before label...

grub-core/term/pci/serial.c line 87

Quoted 4 lines
grub-core/term/pci/serial.c new file +4 -0
+  grub_free (port->name);
+  grub_free (port);
+  return 0;
+}

Daniel

author Tested-by Glenn Washburn Reviewed-by Glenn Washburn
#7 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 3 lines · Daniel Kiper

Sorry for late reply...

May I ask you to send the patches using "git send-email"?

I'll try -- I'm one of the few quilt holdouts in Linux-land so I don't have much experience with it.

Quoted 7 lines

Please add a blurb how to use this driver to the docs/grub.texi file.

Quoted 5 lines

GRUB_TERMINAL="serial console"

---

Quoted 11 lines

grub-core/Makefile.core.def module = { · line 2050

Quoted 9 lines

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;

I think this should be "x86 = term/pci/serial.c".

I thought the whole purpose of Glenn's patch was to allow doing the 'pci =' thing, so that all platforms that support PCI get to have the benefit.

But if you really want I can make it 'x86 =' ofcourse.

Quoted 18 lines

grub-core/Makefile.core.def module = { · line 2052

Quoted 2 lines
grub-core/Makefile.core.def +2 -0
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void *data)

grub_pci_id_t pciid __attribute__ ((unused))

grub-core/Makefile.core.def module = {

Quoted 9 lines
grub-core/Makefile.core.def +9 -0
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;

... and please drop this...

Quoted 5 lines
Quoted 1 line

+error:

s/error/fail/

And please add a space before label...

All done, except the Makefile thing, find the updated version below. I'll attempt to git-send-email both patches once we agree on the Makefile hunk.

---
Subject: term/serial: Add support for PCI serial devices

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

From which the following config (/etc/default/grub) gets a working serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --speed=115200 pci_00:16.3" GRUB_TERMINAL="serial console"

---

grub-core/Makefile.core.def +1 -0
Index: grub/grub-core/Makefile.core.def
===================================================================
@@ -2057,6 +2057,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
   enable = terminfomodule;
   enable = ieee1275;
grub-core/term/pci/serial.c new file +93 -0

93 lines not on this page · raw message

grub-core/term/serial.c +3 -0
Index: grub/grub-core/term/serial.c
===================================================================
@@ -505,6 +505,9 @@ GRUB_MOD_INIT(serial)
 #ifdef GRUB_MACHINE_ARC
   grub_arcserial_init ();
 #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
 }
 
 GRUB_MOD_FINI(serial)
include/grub/pci.h +5 -0
Index: grub/include/grub/pci.h
===================================================================
@@ -80,8 +80,13 @@
 
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
 #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
 #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
 #ifndef ASM_FILE
 
include/grub/serial.h +4 -0
Index: grub/include/grub/serial.h
===================================================================
@@ -210,6 +210,10 @@ grub_arcserial_init (void);
 struct grub_serial_port *grub_arcserial_add_port (const char *path);
 #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
 struct grub_serial_port *grub_serial_find (const char *name);
 extern struct grub_serial_driver grub_ns8250_driver;
 void EXPORT_FUNC(grub_serial_unregister_driver) (struct grub_serial_driver *driver);
docs/grub.texi +17 -1
Index: grub/docs/grub.texi
===================================================================
@@ -1386,6 +1386,7 @@ separated by spaces.
 Valid terminal input names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial terminal),
 @samp{serial_<port>} (serial terminal with explicit port selection),
+@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location),
 @samp{at_keyboard} (PC AT keyboard), or @samp{usb_keyboard} (USB keyboard
 using the HID Boot Protocol, for cases where the firmware does not handle
 this).
@@ -1399,6 +1400,7 @@ separated by spaces.
 Valid terminal output names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial terminal),
 @samp{serial_<port>} (serial terminal with explicit port selection),
+@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location),
 @samp{gfxterm} (graphics-mode output), @samp{vga_text} (VGA text output),
 @samp{mda_text} (MDA text output), @samp{morse} (Morse-coding using system
 beeper) or @samp{spkmodem} (simple data protocol using system speaker).
@@ -4165,7 +4167,7 @@ Commands usable anywhere in the menu and
 @node serial
 @subsection serial
 
-@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}]
+@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] [@option{name}]
 Initialize a serial device. @var{unit} is a number in the range 0-3
 specifying which serial port to use; default is 0, which corresponds to
 the port often called COM1.
@@ -4197,6 +4199,19 @@ If passed no @var{unit} nor @var{port},
 the system default serial port and its configuration. If this information
 is not available, it will default to @var{unit} 0.
 
+If used @var{name}, a machine and driver specific name given during probing,
+will be used to indicate which serial port to use. Possible forms include:
+@itemize @bullet
+@item
+@samp{serial_<port>} as an alternative to --port
+@item
+@samp{usbN} the N'th USB serial detected
+@item
+@samp{efiN} the N'th EFI serial detected
+@item
+@samp{pci_<bus>:<device>.<func>} PCI serial at the specified location
+@end itemize
+
 The serial port is not used as a communication channel unless the
 @command{terminal_input} or @command{terminal_output} command is used
 (@pxref{terminal_input}, @pxref{terminal_output}).
@@ -4205,6 +4220,7 @@ Examples:
 @example
 serial --port=3f8 --speed=9600
 serial --port=mmio,fefb0000.l --speed=115200
+serial --speed=115200 pci_00:16.3
 @end example
 
 See also @ref{Serial terminal}.
#8 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 29 lines · On Thu, 26 Jan 2023 10:37:35 +0100 Peter Zijlstra <[email protected]> wrote:
Quoted 3 lines · Daniel Kiper

Sorry for late reply...

May I ask you to send the patches using "git send-email"?

I'll try -- I'm one of the few quilt holdouts in Linux-land so I don't have much experience with it.

Quoted 8 lines

Please add a blurb how to use this driver to the docs/grub.texi file.

Quoted 5 lines

GRUB_TERMINAL="serial console"

---

Quoted 11 lines

grub-core/Makefile.core.def module = { · line 2050

Quoted 9 lines

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;

I think this should be "x86 = term/pci/serial.c".

Quoted 5 lines

I thought the whole purpose of Glenn's patch was to allow doing the 'pci =' thing, so that all platforms that support PCI get to have the benefit.

But if you really want I can make it 'x86 =' ofcourse.

To throw in my two cents, I believe this is correct the way it is with 'pci =' as Peter mentioned. Am I also missing something here?

Glenn

Quoted 284 lines
Quoted 19 lines

grub-core/Makefile.core.def module = { · line 2053

Quoted 3 lines
grub-core/Makefile.core.def +2 -0
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void
 *data)

grub_pci_id_t pciid __attribute__ ((unused))

grub-core/Makefile.core.def module = {

Quoted 9 lines
grub-core/Makefile.core.def +9 -0
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;

... and please drop this...

Quoted 5 lines
Quoted 1 line

+error:

s/error/fail/

And please add a space before label...

All done, except the Makefile thing, find the updated version below. I'll attempt to git-send-email both patches once we agree on the Makefile hunk.

---
Subject: term/serial: Add support for PCI serial devices

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550]) DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 19 Region 0: I/O ports at 40a0 [size=8] Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: serial

From which the following config (/etc/default/grub) gets a working serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --speed=115200 pci_00:16.3" GRUB_TERMINAL="serial console"

---

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2057,6 +2057,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
   enable = terminfomodule;
   enable = ieee1275;

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c new file +6 -0
@@ -0,0 +1,93 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2022  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as

published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *

+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.

+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GRUB. If not, see <http://www.gnu.org/licenses/>.
+ */

grub-core/term/pci/serial.c new file +76 -0
+
+#include <grub/serial.h>
+#include <grub/term.h>
+#include <grub/types.h>
+#include <grub/pci.h>
+#include <grub/mm.h>
+#include <grub/misc.h>
+
+static int
+find_pciserial (grub_pci_device_t dev,
+		grub_pci_id_t pciid __attribute__ ((unused)),
+		void *data __attribute__ ((unused)))
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  grub_err_t err;
+
+  cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
+  cmdreg = grub_pci_read (cmd_addr);
+
+  class_addr = grub_pci_make_address (dev, GRUB_PCI_REG_REVISION);
+  class = grub_pci_read (class_addr);
+
+  bar_addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+  bar = grub_pci_read (bar_addr);
+
+  /* 16550 compatible MODEM or SERIAL */
+  if (((class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_MODEM &&
+       (class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_SERIAL) ||
+      ((class >> 8) & 0xff) != GRUB_PCI_SERIAL_16550_COMPATIBLE)
+    return 0;
+
+  if ((bar & GRUB_PCI_ADDR_SPACE_MASK) != GRUB_PCI_ADDR_SPACE_IO)
+    return 0;
+
+  port = grub_zalloc (sizeof (*port));
+  if (port == NULL)
+    return 0;
+
+  port->name = grub_xasprintf ("pci_%02x:%02x.%x",
+			       grub_pci_get_bus (dev),
+			       grub_pci_get_device (dev),
+			       grub_pci_get_function (dev));
+  if (port->name == NULL)
+    goto fail;
+
+  grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);
+
+  port->driver = &grub_ns8250_driver;
+  port->port = bar & GRUB_PCI_ADDR_IO_MASK;
+  err = grub_serial_config_defaults (port);
+  if (err != GRUB_ERR_NONE)
+    {
+      grub_print_error ();
+      goto fail;
+    }
+
+  err = grub_serial_register (port);
+  if (err != GRUB_ERR_NONE)
+    goto fail;
+
+  return 0;
+
+ fail:
+  grub_free (port->name);
+  grub_free (port);
+  return 0;
+}
+
+void
+grub_pciserial_init (void)
+{
+  grub_pci_iterate (find_pciserial, NULL);
+}

Index: grub/grub-core/term/serial.c
===================================================================

grub-core/term/serial.c +3 -0
@@ -505,6 +505,9 @@ GRUB_MOD_INIT(serial)
 #ifdef GRUB_MACHINE_ARC
   grub_arcserial_init ();
 #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
 }
 
 GRUB_MOD_FINI(serial)

Index: grub/include/grub/pci.h
===================================================================

include/grub/pci.h +5 -0
@@ -80,8 +80,13 @@
 
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
 #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
 #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
 #ifndef ASM_FILE
 

Index: grub/include/grub/serial.h
===================================================================

include/grub/serial.h +4 -0
@@ -210,6 +210,10 @@ grub_arcserial_init (void);
 struct grub_serial_port *grub_arcserial_add_port (const char *path);
 #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
 struct grub_serial_port *grub_serial_find (const char *name);
 extern struct grub_serial_driver grub_ns8250_driver;
 void EXPORT_FUNC(grub_serial_unregister_driver) (struct

grub_serial_driver *driver); Index: grub/docs/grub.texi
===================================================================

docs/grub.texi +0 -0
@@ -1386,6 +1386,7 @@ separated by spaces.
 Valid terminal input names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial

terminal), @samp{serial_<port>} (serial terminal with explicit port selection), +@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location), @samp{at_keyboard} (PC AT keyboard), or @samp{usb_keyboard} (USB keyboard using the HID Boot Protocol, for cases where the firmware does not handle this).

docs/grub.texi +0 -0
@@ -1399,6 +1400,7 @@ separated by spaces.
 Valid terminal output names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial

terminal), @samp{serial_<port>} (serial terminal with explicit port selection), +@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location), @samp{gfxterm} (graphics-mode output), @samp{vga_text} (VGA text output), @samp{mda_text} (MDA text output), @samp{morse} (Morse-coding using system beeper) or @samp{spkmodem} (simple data protocol using system speaker). @@ -4165,7 +4167,7 @@ Commands usable anywhere in the menu and @node serial
@subsection serial

-@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] +@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] [@option{name}] Initialize a serial device. @var{unit} is a number in the range 0-3 specifying which serial port to use; default is 0, which corresponds to the port often called COM1. @@ -4197,6 +4199,19 @@ If passed no @var{unit} nor @var{port}, the system default serial port and its configuration. If this information is not available, it will default to @var{unit} 0. +If used @var{name}, a machine and driver specific name given during probing, +will be used to indicate which serial port to use. Possible forms include: +@itemize @bullet +@item +@samp{serial_<port>} as an alternative to --port +@item +@samp{usbN} the N'th USB serial detected
+@item
+@samp{efiN} the N'th EFI serial detected
+@item
+@samp{pci_<bus>:<device>.<func>} PCI serial at the specified location +@end itemize

docs/grub.texi +2 -0
+
 The serial port is not used as a communication channel unless the
 @command{terminal_input} or @command{terminal_output} command is used
 (@pxref{terminal_input}, @pxref{terminal_output}).
@@ -4205,6 +4220,7 @@ Examples:
 @example
 serial --port=3f8 --speed=9600
 serial --port=mmio,fefb0000.l --speed=115200
+serial --speed=115200 pci_00:16.3
 @end example
 
 See also @ref{Serial terminal}.
#9 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

In reply to Peter Zijlstra
Quoted 28 lines · Peter Zijlstra
Quoted 3 lines · Daniel Kiper

Sorry for late reply...

May I ask you to send the patches using "git send-email"?

I'll try -- I'm one of the few quilt holdouts in Linux-land so I don't have much experience with it.

Quoted 7 lines

Please add a blurb how to use this driver to the docs/grub.texi file.

Quoted 5 lines

GRUB_TERMINAL="serial console"

---

Quoted 11 lines

grub-core/Makefile.core.def module = { · line 2050

Quoted 9 lines

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;

I think this should be "x86 = term/pci/serial.c".

Quoted 5 lines

I thought the whole purpose of Glenn's patch was to allow doing the 'pci =' thing, so that all platforms that support PCI get to have the benefit.

But if you really want I can make it 'x86 =' ofcourse.

Ben, you've lived a very long time in !x86 land, can you elucidate us on this? My thinking is that if someone sticks a 16550 on a PCI board, this driver should work on any PCI enabled platform, not just x86, rite?

Quoted 284 lines
Quoted 20 lines

grub-core/Makefile.core.def module = { · line 2052

Quoted 4 lines
grub-core/Makefile.core.def +2 -0
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void *data)

grub_pci_id_t pciid __attribute__ ((unused))

grub-core/Makefile.core.def module = {

Quoted 9 lines
grub-core/Makefile.core.def +9 -0
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;

... and please drop this...

Quoted 5 lines
Quoted 1 line

+error:

s/error/fail/

And please add a space before label...

All done, except the Makefile thing, find the updated version below. I'll attempt to git-send-email both patches once we agree on the Makefile hunk.

---
Subject: term/serial: Add support for PCI serial devices

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

From which the following config (/etc/default/grub) gets a working serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --speed=115200 pci_00:16.3" GRUB_TERMINAL="serial console"

---

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2057,6 +2057,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
   enable = terminfomodule;
   enable = ieee1275;

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c new file +93 -0
@@ -0,0 +1,93 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2022  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <grub/serial.h>
+#include <grub/term.h>
+#include <grub/types.h>
+#include <grub/pci.h>
+#include <grub/mm.h>
+#include <grub/misc.h>
+
+static int
+find_pciserial (grub_pci_device_t dev,
+		grub_pci_id_t pciid __attribute__ ((unused)),
+		void *data __attribute__ ((unused)))
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  grub_err_t err;
+
+  cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
+  cmdreg = grub_pci_read (cmd_addr);
+
+  class_addr = grub_pci_make_address (dev, GRUB_PCI_REG_REVISION);
+  class = grub_pci_read (class_addr);
+
+  bar_addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+  bar = grub_pci_read (bar_addr);
+
+  /* 16550 compatible MODEM or SERIAL */
+  if (((class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_MODEM &&
+       (class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_SERIAL) ||
+      ((class >> 8) & 0xff) != GRUB_PCI_SERIAL_16550_COMPATIBLE)
+    return 0;
+
+  if ((bar & GRUB_PCI_ADDR_SPACE_MASK) != GRUB_PCI_ADDR_SPACE_IO)
+    return 0;
+
+  port = grub_zalloc (sizeof (*port));
+  if (port == NULL)
+    return 0;
+
+  port->name = grub_xasprintf ("pci_%02x:%02x.%x",
+			       grub_pci_get_bus (dev),
+			       grub_pci_get_device (dev),
+			       grub_pci_get_function (dev));
+  if (port->name == NULL)
+    goto fail;
+
+  grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);
+
+  port->driver = &grub_ns8250_driver;
+  port->port = bar & GRUB_PCI_ADDR_IO_MASK;
+  err = grub_serial_config_defaults (port);
+  if (err != GRUB_ERR_NONE)
+    {
+      grub_print_error ();
+      goto fail;
+    }
+
+  err = grub_serial_register (port);
+  if (err != GRUB_ERR_NONE)
+    goto fail;
+
+  return 0;
+
+ fail:
+  grub_free (port->name);
+  grub_free (port);
+  return 0;
+}
+
+void
+grub_pciserial_init (void)
+{
+  grub_pci_iterate (find_pciserial, NULL);
+}

Index: grub/grub-core/term/serial.c
===================================================================

grub-core/term/serial.c +3 -0
@@ -505,6 +505,9 @@ GRUB_MOD_INIT(serial)
 #ifdef GRUB_MACHINE_ARC
   grub_arcserial_init ();
 #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
 }
 
 GRUB_MOD_FINI(serial)

Index: grub/include/grub/pci.h
===================================================================

include/grub/pci.h +5 -0
@@ -80,8 +80,13 @@
 
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
 #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
 #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
 #ifndef ASM_FILE
 

Index: grub/include/grub/serial.h
===================================================================

include/grub/serial.h +4 -0
@@ -210,6 +210,10 @@ grub_arcserial_init (void);
 struct grub_serial_port *grub_arcserial_add_port (const char *path);
 #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
 struct grub_serial_port *grub_serial_find (const char *name);
 extern struct grub_serial_driver grub_ns8250_driver;
 void EXPORT_FUNC(grub_serial_unregister_driver) (struct grub_serial_driver *driver);

Index: grub/docs/grub.texi
===================================================================

docs/grub.texi +17 -1
@@ -1386,6 +1386,7 @@ separated by spaces.
 Valid terminal input names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial terminal),
 @samp{serial_<port>} (serial terminal with explicit port selection),
+@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location),
 @samp{at_keyboard} (PC AT keyboard), or @samp{usb_keyboard} (USB keyboard
 using the HID Boot Protocol, for cases where the firmware does not handle
 this).
@@ -1399,6 +1400,7 @@ separated by spaces.
 Valid terminal output names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial terminal),
 @samp{serial_<port>} (serial terminal with explicit port selection),
+@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location),
 @samp{gfxterm} (graphics-mode output), @samp{vga_text} (VGA text output),
 @samp{mda_text} (MDA text output), @samp{morse} (Morse-coding using system
 beeper) or @samp{spkmodem} (simple data protocol using system speaker).
@@ -4165,7 +4167,7 @@ Commands usable anywhere in the menu and
 @node serial
 @subsection serial
 
-@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}]
+@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] [@option{name}]
 Initialize a serial device. @var{unit} is a number in the range 0-3
 specifying which serial port to use; default is 0, which corresponds to
 the port often called COM1.
@@ -4197,6 +4199,19 @@ If passed no @var{unit} nor @var{port},
 the system default serial port and its configuration. If this information
 is not available, it will default to @var{unit} 0.
 
+If used @var{name}, a machine and driver specific name given during probing,
+will be used to indicate which serial port to use. Possible forms include:
+@itemize @bullet
+@item
+@samp{serial_<port>} as an alternative to --port
+@item
+@samp{usbN} the N'th USB serial detected
+@item
+@samp{efiN} the N'th EFI serial detected
+@item
+@samp{pci_<bus>:<device>.<func>} PCI serial at the specified location
+@end itemize
+
 The serial port is not used as a communication channel unless the
 @command{terminal_input} or @command{terminal_output} command is used
 (@pxref{terminal_input}, @pxref{terminal_output}).
@@ -4205,6 +4220,7 @@ Examples:
 @example
 serial --port=3f8 --speed=9600
 serial --port=mmio,fefb0000.l --speed=115200
+serial --speed=115200 pci_00:16.3
 @end example
 
 See also @ref{Serial terminal}.
#10 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Adding another Ben's address...

Quoted 33 lines · Peter Zijlstra
Quoted 32 lines · Peter Zijlstra
Quoted 3 lines · Daniel Kiper

Sorry for late reply...

May I ask you to send the patches using "git send-email"?

I'll try -- I'm one of the few quilt holdouts in Linux-land so I don't have much experience with it.

Quoted 7 lines

Please add a blurb how to use this driver to the docs/grub.texi file.

Quoted 5 lines

GRUB_TERMINAL="serial console"

---

Quoted 11 lines

grub-core/Makefile.core.def module = { · line 2050

Quoted 9 lines

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;

I think this should be "x86 = term/pci/serial.c".

I thought the whole purpose of Glenn's patch was to allow doing the 'pci =' thing, so that all platforms that support PCI get to have the benefit.

Quoted 5 lines
Quoted 1 line

But if you really want I can make it 'x86 =' ofcourse.

Ben, you've lived a very long time in !x86 land, can you elucidate us on this? My thinking is that if someone sticks a 16550 on a PCI board, this driver should work on any PCI enabled platform, not just x86, rite?

Ben, here ^^^ is the question for you...

Daniel

Quoted 282 lines
Quoted 282 lines
Quoted 18 lines

grub-core/Makefile.core.def module = { · line 2052

Quoted 2 lines
grub-core/Makefile.core.def +2 -0
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void *data)

grub_pci_id_t pciid __attribute__ ((unused))

grub-core/Makefile.core.def module = {

Quoted 9 lines
grub-core/Makefile.core.def +9 -0
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;

... and please drop this...

Quoted 5 lines
Quoted 1 line

+error:

s/error/fail/

And please add a space before label...

All done, except the Makefile thing, find the updated version below. I'll attempt to git-send-email both patches once we agree on the Makefile hunk.

---
Subject: term/serial: Add support for PCI serial devices

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial

From which the following config (/etc/default/grub) gets a working serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --speed=115200 pci_00:16.3" GRUB_TERMINAL="serial console"

---

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2057,6 +2057,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
   enable = terminfomodule;
   enable = ieee1275;

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c new file +93 -0
@@ -0,0 +1,93 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2022  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <grub/serial.h>
+#include <grub/term.h>
+#include <grub/types.h>
+#include <grub/pci.h>
+#include <grub/mm.h>
+#include <grub/misc.h>
+
+static int
+find_pciserial (grub_pci_device_t dev,
+		grub_pci_id_t pciid __attribute__ ((unused)),
+		void *data __attribute__ ((unused)))
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  grub_err_t err;
+
+  cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
+  cmdreg = grub_pci_read (cmd_addr);
+
+  class_addr = grub_pci_make_address (dev, GRUB_PCI_REG_REVISION);
+  class = grub_pci_read (class_addr);
+
+  bar_addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+  bar = grub_pci_read (bar_addr);
+
+  /* 16550 compatible MODEM or SERIAL */
+  if (((class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_MODEM &&
+       (class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_SERIAL) ||
+      ((class >> 8) & 0xff) != GRUB_PCI_SERIAL_16550_COMPATIBLE)
+    return 0;
+
+  if ((bar & GRUB_PCI_ADDR_SPACE_MASK) != GRUB_PCI_ADDR_SPACE_IO)
+    return 0;
+
+  port = grub_zalloc (sizeof (*port));
+  if (port == NULL)
+    return 0;
+
+  port->name = grub_xasprintf ("pci_%02x:%02x.%x",
+			       grub_pci_get_bus (dev),
+			       grub_pci_get_device (dev),
+			       grub_pci_get_function (dev));
+  if (port->name == NULL)
+    goto fail;
+
+  grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);
+
+  port->driver = &grub_ns8250_driver;
+  port->port = bar & GRUB_PCI_ADDR_IO_MASK;
+  err = grub_serial_config_defaults (port);
+  if (err != GRUB_ERR_NONE)
+    {
+      grub_print_error ();
+      goto fail;
+    }
+
+  err = grub_serial_register (port);
+  if (err != GRUB_ERR_NONE)
+    goto fail;
+
+  return 0;
+
+ fail:
+  grub_free (port->name);
+  grub_free (port);
+  return 0;
+}
+
+void
+grub_pciserial_init (void)
+{
+  grub_pci_iterate (find_pciserial, NULL);
+}

Index: grub/grub-core/term/serial.c
===================================================================

grub-core/term/serial.c +3 -0
@@ -505,6 +505,9 @@ GRUB_MOD_INIT(serial)
 #ifdef GRUB_MACHINE_ARC
   grub_arcserial_init ();
 #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
 }
 
 GRUB_MOD_FINI(serial)

Index: grub/include/grub/pci.h
===================================================================

include/grub/pci.h +5 -0
@@ -80,8 +80,13 @@
 
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
 #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
 #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
 #ifndef ASM_FILE
 

Index: grub/include/grub/serial.h
===================================================================

include/grub/serial.h +4 -0
@@ -210,6 +210,10 @@ grub_arcserial_init (void);
 struct grub_serial_port *grub_arcserial_add_port (const char *path);
 #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
 struct grub_serial_port *grub_serial_find (const char *name);
 extern struct grub_serial_driver grub_ns8250_driver;
 void EXPORT_FUNC(grub_serial_unregister_driver) (struct grub_serial_driver *driver);

Index: grub/docs/grub.texi
===================================================================

docs/grub.texi +17 -1
@@ -1386,6 +1386,7 @@ separated by spaces.
 Valid terminal input names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial terminal),
 @samp{serial_<port>} (serial terminal with explicit port selection),
+@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location),
 @samp{at_keyboard} (PC AT keyboard), or @samp{usb_keyboard} (USB keyboard
 using the HID Boot Protocol, for cases where the firmware does not handle
 this).
@@ -1399,6 +1400,7 @@ separated by spaces.
 Valid terminal output names depend on the platform, but may include
 @samp{console} (native platform console), @samp{serial} (serial terminal),
 @samp{serial_<port>} (serial terminal with explicit port selection),
+@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location),
 @samp{gfxterm} (graphics-mode output), @samp{vga_text} (VGA text output),
 @samp{mda_text} (MDA text output), @samp{morse} (Morse-coding using system
 beeper) or @samp{spkmodem} (simple data protocol using system speaker).
@@ -4165,7 +4167,7 @@ Commands usable anywhere in the menu and
 @node serial
 @subsection serial
 
-@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}]
+@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] [@option{name}]
 Initialize a serial device. @var{unit} is a number in the range 0-3
 specifying which serial port to use; default is 0, which corresponds to
 the port often called COM1.
@@ -4197,6 +4199,19 @@ If passed no @var{unit} nor @var{port},
 the system default serial port and its configuration. If this information
 is not available, it will default to @var{unit} 0.
 
+If used @var{name}, a machine and driver specific name given during probing,
+will be used to indicate which serial port to use. Possible forms include:
+@itemize @bullet
+@item
+@samp{serial_<port>} as an alternative to --port
+@item
+@samp{usbN} the N'th USB serial detected
+@item
+@samp{efiN} the N'th EFI serial detected
+@item
+@samp{pci_<bus>:<device>.<func>} PCI serial at the specified location
+@end itemize
+
 The serial port is not used as a communication channel unless the
 @command{terminal_input} or @command{terminal_output} command is used
 (@pxref{terminal_input}, @pxref{terminal_output}).
@@ -4205,6 +4220,7 @@ Examples:
 @example
 serial --port=3f8 --speed=9600
 serial --port=mmio,fefb0000.l --speed=115200
+serial --speed=115200 pci_00:16.3
 @end example
 
 See also @ref{Serial terminal}.
#11 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 1 line · Daniel Kiper

Adding another Ben's address...

Ah ! I saw the previous one before breakfast the other day, and forgot to reply once properly caffeinated :-)

Quoted 5 lines
Quoted 3 lines

Ben, you've lived a very long time in !x86 land, can you elucidate us on this? My thinking is that if someone sticks a 16550 on a PCI board, this driver should work on any PCI enabled platform, not just x86, rite?

Ben, here ^^^ is the question for you...

It's ... complicated :-)

On most non-x86 platforms you don't have a 1:1 mapping between PCI BAR value and the corresponding CPU address. Now I think with ACPI and UEFI there are ways to convert but I don't remember them off the top of my mind, there are similar ways with Open Firmware or flat device-trees. But grub doesn't have the infrastructure for that.

Also non-x86 don't have "IO ports" per se, they are mapped somewhere in the MMIO address space, and how that is done is very platform specific.

So at this point it makes sense to leave that x86 only. Once can add support for other archs/platforms later with the appopriate address conversion trickery.

Another issue is that grub doesn't have any form of MMIO abstraction layer providing things like ordering enforcement (memory barriers) etc... so doing any kind of direct device access in grub on most non- x86 is chancy at best.

Cheers,
Ben.

Quoted 285 lines

Daniel

Quoted 282 lines
Quoted 282 lines
Quoted 18 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static int
+find_pciserial (grub_pci_device_t dev, grub_pci_id_t pciid, void *data)

grub_pci_id_t pciid __attribute__ ((unused))

grub-core/term/pci/serial.c

Quoted 9 lines
grub-core/term/pci/serial.c new file +9 -0
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  int *port_num = data;
+  grub_err_t err;
+
+  (void)pciid;

... and please drop this...

Quoted 5 lines
Quoted 1 line

+error:

s/error/fail/

And please add a space before label...

All done, except the Makefile thing, find the updated version below. I'll attempt to git-send-email both patches once we agree on the Makefile hunk.

---
Subject: term/serial: Add support for PCI serial devices

Loosely based on early_pci_serial_init() from Linux, allow GRUB to make use of PCI serial devices.

Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI enumerated device but doesn't include it in the EFI tables.

Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT enabled. This specific machine has (from lspci -vv):

00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
        DeviceName: Onboard - Other
        Subsystem: Lenovo Device 330e
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin D routed to IRQ 19
        Region 0: I/O ports at 40a0 [size=8]
        Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: serial

From which the following config (/etc/default/grub) gets a working serial setup:

GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200" GRUB_SERIAL_COMMAND="serial --speed=115200 pci_00:16.3" GRUB_TERMINAL="serial console"

---

Index: grub/grub-core/Makefile.core.def
===================================================================

grub-core/Makefile.core.def +1 -0
@@ -2057,6 +2057,7 @@ module = {
    ieee1275 = term/ieee1275/serial.c;
    mips_arc = term/arc/serial.c;
    efi = term/efi/serial.c;
+  pci = term/pci/serial.c;
 
    enable = terminfomodule;
    enable = ieee1275;

Index: grub/grub-core/term/pci/serial.c
===================================================================

grub-core/term/pci/serial.c new file +93 -0
@@ -0,0 +1,93 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2022  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <grub/serial.h>
+#include <grub/term.h>
+#include <grub/types.h>
+#include <grub/pci.h>
+#include <grub/mm.h>
+#include <grub/misc.h>
+
+static int
+find_pciserial (grub_pci_device_t dev,
+               grub_pci_id_t pciid __attribute__ ((unused)),
+               void *data __attribute__ ((unused)))
+{
+  grub_pci_address_t cmd_addr, class_addr, bar_addr;
+  struct grub_serial_port *port;
+  grub_uint32_t class, bar;
+  grub_uint16_t cmdreg;
+  grub_err_t err;
+
+  cmd_addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
+  cmdreg = grub_pci_read (cmd_addr);
+
+  class_addr = grub_pci_make_address (dev, GRUB_PCI_REG_REVISION);
+  class = grub_pci_read (class_addr);
+
+  bar_addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+  bar = grub_pci_read (bar_addr);
+
+  /* 16550 compatible MODEM or SERIAL */
+  if (((class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_MODEM &&
+       (class >> 16) != GRUB_PCI_CLASS_COMMUNICATION_SERIAL) ||
+      ((class >> 8) & 0xff) != GRUB_PCI_SERIAL_16550_COMPATIBLE)
+    return 0;
+
+  if ((bar & GRUB_PCI_ADDR_SPACE_MASK) != GRUB_PCI_ADDR_SPACE_IO)
+    return 0;
+
+  port = grub_zalloc (sizeof (*port));
+  if (port == NULL)
+    return 0;
+
+  port->name = grub_xasprintf ("pci_%02x:%02x.%x",
+                              grub_pci_get_bus (dev),
+                              grub_pci_get_device (dev),
+                              grub_pci_get_function (dev));
+  if (port->name == NULL)
+    goto fail;
+
+  grub_pci_write (cmd_addr, cmdreg | GRUB_PCI_COMMAND_IO_ENABLED);
+
+  port->driver = &grub_ns8250_driver;
+  port->port = bar & GRUB_PCI_ADDR_IO_MASK;
+  err = grub_serial_config_defaults (port);
+  if (err != GRUB_ERR_NONE)
+    {
+      grub_print_error ();
+      goto fail;
+    }
+
+  err = grub_serial_register (port);
+  if (err != GRUB_ERR_NONE)
+    goto fail;
+
+  return 0;
+
+ fail:
+  grub_free (port->name);
+  grub_free (port);
+  return 0;
+}
+
+void
+grub_pciserial_init (void)
+{
+  grub_pci_iterate (find_pciserial, NULL);
+}

Index: grub/grub-core/term/serial.c
===================================================================

grub-core/term/serial.c +3 -0
@@ -505,6 +505,9 @@ GRUB_MOD_INIT(serial)
  #ifdef GRUB_MACHINE_ARC
    grub_arcserial_init ();
  #endif
+#ifdef GRUB_HAS_PCI
+  grub_pciserial_init ();
+#endif
  }
 
  GRUB_MOD_FINI(serial)

Index: grub/include/grub/pci.h
===================================================================

include/grub/pci.h +5 -0
@@ -80,8 +80,13 @@
 
  #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
  #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
+
  #define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
  #define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
+#define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
+
+#define  GRUB_PCI_SERIAL_16550_COMPATIBLE 0x02
 
  #ifndef ASM_FILE
 

Index: grub/include/grub/serial.h
===================================================================

include/grub/serial.h +4 -0
@@ -210,6 +210,10 @@ grub_arcserial_init (void);
  struct grub_serial_port *grub_arcserial_add_port (const char *path);
  #endif
 
+#ifdef GRUB_HAS_PCI
+void grub_pciserial_init (void);
+#endif
+
  struct grub_serial_port *grub_serial_find (const char *name);
  extern struct grub_serial_driver grub_ns8250_driver;
  void EXPORT_FUNC(grub_serial_unregister_driver) (struct grub_serial_driver *driver);

Index: grub/docs/grub.texi
===================================================================

docs/grub.texi +0 -0
@@ -1386,6 +1386,7 @@ separated by spaces.

 Valid terminal input names depend on the platform, but may include @samp{console} (native platform console), @samp{serial} (serial terminal), @samp{serial_<port>} (serial terminal with explicit port selection), +@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location), @samp{at_keyboard} (PC AT keyboard), or @samp{usb_keyboard} (USB keyboard using the HID Boot Protocol, for cases where the firmware does not handle this).

docs/grub.texi +0 -0
@@ -1399,6 +1400,7 @@ separated by spaces.

 Valid terminal output names depend on the platform, but may include @samp{console} (native platform console), @samp{serial} (serial terminal), @samp{serial_<port>} (serial terminal with explicit port selection), +@samp{pci_<bus>:<device>.<function>} (PCI serial with explicit location), @samp{gfxterm} (graphics-mode output), @samp{vga_text} (VGA text output), @samp{mda_text} (MDA text output), @samp{morse} (Morse-coding using system beeper) or @samp{spkmodem} (simple data protocol using system speaker).

docs/grub.texi +0 -0
@@ -4165,7 +4167,7 @@ Commands usable anywhere in the menu and

 @node serial
 @subsection serial

-@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] +@deffn Command serial [@option{--unit=unit}] [@option{--port=port}] [@option{--speed=speed}] [@option{--word=word}] [@option{--parity=parity}] [@option{--stop=stop}] [@option{name}] Initialize a serial device. @var{unit} is a number in the range 0-3
 specifying which serial port to use; default is 0, which corresponds to
 the port often called COM1.

docs/grub.texi +0 -0
@@ -4197,6 +4199,19 @@ If passed no @var{unit} nor @var{port},

 the system default serial port and its configuration. If this information is not available, it will default to @var{unit} 0.

docs/grub.texi +13 -0
+If used @var{name}, a machine and driver specific name given during probing,
+will be used to indicate which serial port to use. Possible forms include:
+@itemize @bullet
+@item
+@samp{serial_<port>} as an alternative to --port
+@item
+@samp{usbN} the N'th USB serial detected
+@item
+@samp{efiN} the N'th EFI serial detected
+@item
+@samp{pci_<bus>:<device>.<func>} PCI serial at the specified location
+@end itemize
+

 The serial port is not used as a communication channel unless the @command{terminal_input} or @command{terminal_output} command is used (@pxref{terminal_input}, @pxref{terminal_output}).

docs/grub.texi +0 -0
@@ -4205,6 +4220,7 @@ Examples:

 @example
 serial --port=3f8 --speed=9600
 serial --port=mmio,fefb0000.l --speed=115200
+serial --speed=115200 pci_00:16.3
 @end example

 See also @ref{Serial terminal}.

#12 lore raw

Re: [PATCH v2 2/3] term/serial: Add support for PCI serial devices

Quoted 23 lines · Benjamin Herrenschmidt
Quoted 1 line · Daniel Kiper

Adding another Ben's address...

Ah ! I saw the previous one before breakfast the other day, and forgot to reply once properly caffeinated :-)

Quoted 5 lines
Quoted 3 lines

Ben, you've lived a very long time in !x86 land, can you elucidate us on this? My thinking is that if someone sticks a 16550 on a PCI board, this driver should work on any PCI enabled platform, not just x86, rite?

Ben, here ^^^ is the question for you...

It's ... complicated :-)

On most non-x86 platforms you don't have a 1:1 mapping between PCI BAR value and the corresponding CPU address. Now I think with ACPI and UEFI there are ways to convert but I don't remember them off the top of my mind, there are similar ways with Open Firmware or flat device-trees. But grub doesn't have the infrastructure for that.

Also non-x86 don't have "IO ports" per se, they are mapped somewhere in the MMIO address space, and how that is done is very platform specific.

Quoted 8 lines

So at this point it makes sense to leave that x86 only. Once can add support for other archs/platforms later with the appopriate address conversion trickery.

Another issue is that grub doesn't have any form of MMIO abstraction layer providing things like ordering enforcement (memory barriers) etc... so doing any kind of direct device access in grub on most non- x86 is chancy at best.

Ben, thank you for explanation. Taking into account above...

grub-core/Makefile.core.def module = { · line 2050

Quoted 7 lines
grub-core/Makefile.core.def +1 -0
@@ -2047,6 +2047,7 @@ module = {
   ieee1275 = term/ieee1275/serial.c;
   mips_arc = term/arc/serial.c;
   efi = term/efi/serial.c;
+  pci = term/pci/serial.c;

... I still think this should be "x86 = term/pci/serial.c".

Until you push me to leave it as "pci = term/pci/serial.c". However, if you want to do that please bring in good arguments... :-)

Daniel

#13 lore raw

PATCH v2 3/3 pci: Rename GRUB_PCI_CLASS_*

In reply to [email protected]

Glenn suggested to rename the existing PCI_CLASS defines to have explicit class and subclass names.

---

grub-core/kern/i386/qemu/init.c +2 -2
Index: grub/grub-core/kern/i386/qemu/init.c
===================================================================
@@ -168,11 +168,11 @@ enable_cards (grub_pci_device_t dev,
 
   class = (grub_pci_read (addr) >> 16) & 0xffff;
 
-  if (class == GRUB_PCI_CLASS_SUBCLASS_VGA)
+  if (class == GRUB_PCI_CLASS_DISPLAY_VGA)
     cmd |= GRUB_PCI_COMMAND_IO_ENABLED
       | GRUB_PCI_COMMAND_MEM_ENABLED;
 
-  if (class == GRUB_PCI_CLASS_SUBCLASS_USB)
+  if (class == GRUB_PCI_CLASS_SERIAL_USB)
     return 0;
 
   addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND);
grub-core/video/efi_uga.c +1 -1
Index: grub/grub-core/video/efi_uga.c
===================================================================
@@ -100,7 +100,7 @@ find_card (grub_pci_device_t dev, grub_p
   addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
   subclass = (grub_pci_read (addr) >> 16) & 0xffff;
 
-  if (subclass != GRUB_PCI_CLASS_SUBCLASS_VGA)
+  if (subclass != GRUB_PCI_CLASS_DISPLAY_VGA)
     return 0;
 
   /* Enable MEM address spaces */
grub-core/video/radeon_fuloong2e.c +1 -1
Index: grub/grub-core/video/radeon_fuloong2e.c
===================================================================
@@ -72,7 +72,7 @@ find_card (grub_pci_device_t dev, grub_p
   addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
   class = grub_pci_read (addr);
 
-  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_SUBCLASS_VGA
+  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_DISPLAY_VGA
       || pciid != 0x515a1002)
     return 0;
 
grub-core/video/radeon_yeeloong3a.c +1 -1
Index: grub/grub-core/video/radeon_yeeloong3a.c
===================================================================
@@ -71,7 +71,7 @@ find_card (grub_pci_device_t dev, grub_p
   addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
   class = grub_pci_read (addr);
 
-  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_SUBCLASS_VGA
+  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_DISPLAY_VGA
       || pciid != 0x96151002)
     return 0;
 
grub-core/video/sis315pro.c +1 -1
Index: grub/grub-core/video/sis315pro.c
===================================================================
@@ -100,7 +100,7 @@ find_card (grub_pci_device_t dev, grub_p
   addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
   class = grub_pci_read (addr);
 
-  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_SUBCLASS_VGA
+  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_DISPLAY_VGA
       || pciid != GRUB_SIS315PRO_PCIID)
     return 0;
 
grub-core/video/sm712.c +1 -1
Index: grub/grub-core/video/sm712.c
===================================================================
@@ -372,7 +372,7 @@ find_card (grub_pci_device_t dev, grub_p
   addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
   class = grub_pci_read (addr);
 
-  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_SUBCLASS_VGA
+  if (((class >> 16) & 0xffff) != GRUB_PCI_CLASS_DISPLAY_VGA
       || pciid != GRUB_SM712_PCIID)
     return 0;
 
include/grub/pci.h +2 -2
Index: grub/include/grub/pci.h
===================================================================
@@ -81,8 +81,8 @@
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_SHIFT 9
 #define  GRUB_PCI_STATUS_DEVSEL_TIMING_MASK 0x0600
 
-#define  GRUB_PCI_CLASS_SUBCLASS_VGA  0x0300
-#define  GRUB_PCI_CLASS_SUBCLASS_USB  0x0c03
+#define  GRUB_PCI_CLASS_DISPLAY_VGA           0x0300
+#define  GRUB_PCI_CLASS_SERIAL_USB            0x0c03
 #define  GRUB_PCI_CLASS_COMMUNICATION_SERIAL  0x0700
 #define  GRUB_PCI_CLASS_COMMUNICATION_MODEM   0x0703
 
#15 lore raw
In reply to [email protected]
Quoted 11 lines · On Fri, 2022-08-26 at 13:01 +0200, [email protected] wrote:

Hi!

A small collection of patches that adds PCI serial support.

The first patch is by Glenn and adds GRUB_HAS_PCI -- it is included so that it is a complete posting.

The second patch is the actual PCI serial support, and the last patch a cleanup requested by Glenn.

Much thanks to Glenn for all the feedback so far.

Ah fun ! I have old patches I was about to revive (we carry them in Amazon Linux) that add SPCR support and MMIO support for our MMIO PCI UARTs on metal instances.

Cheers,
Ben.

Tested-by Reviewed-by on the v2 series
#16 lore raw
In reply to [email protected]
Quoted 4 lines · On Fri, 26 Aug 2022 13:01:42 +0200 [email protected] wrote:

Hi!

A small collection of patches that adds PCI serial support.

Quoted 8 lines

The first patch is by Glenn and adds GRUB_HAS_PCI -- it is included so that it is a complete posting.

The second patch is the actual PCI serial support, and the last patch a cleanup requested by Glenn.

Much thanks to Glenn for all the feedback so far.

I've had to occasion to play with AMT recently, so I've tested this patch series and can confirm that it works as advertised. I added a reviewed by for one of the patches in this series many months ago, and I'll now formally add it to the whole series. The first patch has already been accepted, but I don't see why that should cause an issue in reviewed and merging the other two. Or does it?

Glenn