perf: RISC-V: misc fixes and improvements
Subsystems (3)
v3 cover perf: RISC-V: misc fixes and improvements
Hi all,
It looks like the previous revision of these patches has slipped through the cracks. So I am sending an updated version rebased on top of for-next branch in riscv kernel tree.
Regards,
Sergey
v2 -> v3:
- rebased on top of for-next branch in riscv kernel tree
- added RB tag by Atish Patra to the first patch
- added perf throttle patch
Sergey Matyukevich (3):
perf: RISC-V: fix access beyond allocated array
perf: RISC-V: exclude invalid pmu counters from SBI calls
perf: RISC-V: throttle perf events
drivers/perf/riscv_pmu_legacy.c | 4 ++-- drivers/perf/riscv_pmu_sbi.c | 33 +++++++++++++++++++++------------ include/linux/perf/riscv_pmu.h | 2 +- 3 files changed, 24 insertions(+), 15 deletions(-)
Signature · 7 lines
2.37.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH v3 1/3 perf: RISC-V: fix access beyond allocated array
From: Sergey Matyukevich <[email protected]>
The root cause could be related to the interpretation of the number of counters reported by SBI firmware. For instance, if we assume that unused timer counter with index 1 is not reported, then the range is correct and larger array needs to be allocated.
This is not the case though since SBI firmware is supposed to report the total number of firmware and hardware counters including special or unused ones like the timer counter. So just fix the range in for-loop.
--- drivers/perf/riscv_pmu_sbi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/perf/riscv_pmu_sbi.c +1 -1
@@ -473,7 +473,7 @@ static int pmu_sbi_get_ctrinfo(int nctr)if (!pmu_ctr_list)return -ENOMEM ; -for (i =0 ; i <= nctr; i++) { +for (i =0 ; i < nctr; i++) { ret =sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_GET_INFO , i,0 ,0 ,0 ,0 ,0 );if (ret.error)/* The logical counter ids are not expected to be contiguous */
Signature · 7 lines
2.37.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 1/3] perf: RISC-V: fix access beyond allocated array
Quoted 1 line · Sergey Matyukevich
[PATCH v3 1/3] perf: RISC-V: fix access beyond allocated array
^^^ (see below)
Quoted 7 lines
From: Sergey Matyukevich <[email protected]>
The root cause could be related to the interpretation of the number of counters reported by SBI firmware. For instance, if we assume that unused timer counter with index 1 is not reported, then the range is correct and larger array needs to be allocated.
I found this to be confusingly worded, had to read it a few times before I understood what you meant. Maybe it's just late on a Friday, I think the theorycrafting about why the code looks how it does got me lol
Quoted 3 lines
This is not the case though since SBI firmware is supposed to report the total number of firmware and hardware counters including special or unused ones like the timer counter. So just fix the range in for-loop.
^^^
I see "fix" mentioned twice here, what commmit does it fix? Thanks,
Conor.
Quoted 24 lines
Signed-off-by Sergey Matyukevich <[email protected]>Reviewed-by Atish Patra <[email protected]>--- drivers/perf/riscv_pmu_sbi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/perf/riscv_pmu_sbi.c +1
-2@@ -473,7 +473,7 @@ static int pmu_sbi_get_ctrinfo(int nctr)if (!pmu_ctr_list)return -ENOMEM ; -for (i =0 ; i <= nctr; i++) { +for (i =0 ; i < nctr; i++) { ret =sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_GET_INFO , i,0 ,0 ,0 ,0 ,0 );if (ret.error)/* The logical counter ids are not expected to be contiguous */ --2.37.1
Quoted 4 lines
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 1/3] perf: RISC-V: fix access beyond allocated array
Quoted 5 lines
Quoted 1 line
[PATCH v3 1/3] perf: RISC-V: fix access beyond allocated array
^^^ (see below)Quoted 3 lines
From: Sergey Matyukevich <[email protected]>
Quoted 8 lines
Quoted 4 lines
The root cause could be related to the interpretation of the number of counters reported by SBI firmware. For instance, if we assume that unused timer counter with index 1 is not reported, then the range is correct and larger array needs to be allocated.
I found this to be confusingly worded, had to read it a few times before I understood what you meant. Maybe it's just late on a Friday, I think the theorycrafting about why the code looks how it does got me lol
Well, it was not exactly theorycrafting, see accompanying opensbi changes:
http://lists.infradead.org/pipermail/opensbi/2022-June/002926.html
I tried to provide some context for this one-liner, but failed to do so.
Quoted 5 lines
Quoted 3 lines
This is not the case though since SBI firmware is supposed to report the total number of firmware and hardware counters including special or unused ones like the timer counter. So just fix the range in for-loop.
^^^I see "fix" mentioned twice here, what commmit does it fix?
That is the initial commit adding the whole SBI PMU driver, so it is a bit confusing to add 'Fixes' in this case. I think the following commit message should be sufficient:
SBI firmware should report total number of firmware and hardware counters including unused ones or special ones. In this case the kernel doesn't need to make any assumptions about gaps in reported counters, e.g. excluded timer counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect if SBI firmware behaves correctly. However it eliminates access beyond the allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1.
Regards,
Sergey
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v3 1/3] perf: RISC-V: fix access beyond allocated array
Quoted 12 lines · Sergey Matyukevich
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Quoted 10 lines
Quoted 1 line
[PATCH v3 1/3] perf: RISC-V: fix access beyond allocated array
^^^ (see below)Quoted 7 lines
From: Sergey Matyukevich <[email protected]>
The root cause could be related to the interpretation of the number of counters reported by SBI firmware. For instance, if we assume that unused timer counter with index 1 is not reported, then the range is correct and larger array needs to be allocated.
Quoted 7 lines
Quoted 3 lines
I found this to be confusingly worded, had to read it a few times before I understood what you meant. Maybe it's just late on a Friday, I think the theorycrafting about why the code looks how it does got me lol
Well, it was not exactly theorycrafting, see accompanying opensbi changes:
http://lists.infradead.org/pipermail/opensbi/2022-June/002926.html
I tried to provide some context for this one-liner, but failed to do so.
It may not have been theorycrafting, but it read like it was. Your proposed commit message below I think does a much better job of explaining why this needs to be fixed.
Quoted 10 lines
Quoted 6 lines
Quoted 4 lines
This is not the case though since SBI firmware is supposed to report the total number of firmware and hardware counters including special or unused ones like the timer counter. So just fix the range in for-loop.
^^^I see "fix" mentioned twice here, what commmit does it fix?
That is the initial commit adding the whole SBI PMU driver, so it is a bit confusing to add 'Fixes' in this case. I think the following commit message should be sufficient:
Fixes tags are good so we know how far back a fix should be backported. The driver was added in 5.18 AFAICT, but that's EOL so this fix would only need to be backported to 5.19. The appropriate fixes line would be:
Quoted 8 lines
SBI firmware should report total number of firmware and hardware counters including unused ones or special ones. In this case the kernel doesn't need to make any assumptions about gaps in reported counters, e.g. excluded timer counter. That was fixed in OpenSBI v1.1 by commit
3f66465fb6bf("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect if SBI firmware behaves correctly. However it eliminates access beyond the allocatedpmu_ctr_listif the kernel is used with OpenSBI older than v1.1.
As I said above, I think this commit message does a far better job of explaining. For v4, could you please use this as the commit message and add the fixes line that I pasted above?
Thanks,
Conor.
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH v3 2/3 perf: RISC-V: exclude invalid pmu counters from SBI calls
In reply to Sergey MatyukevichFrom: Sergey Matyukevich <[email protected]>
SBI firmware may not provide information for some counters in response to SBI_EXT_PMU_COUNTER_GET_INFO call. Exclude such counters from the subsequent SBI requests. For this purpose use global mask to keep track of fully specified counters.
--- drivers/perf/riscv_pmu_legacy.c | 4 ++-- drivers/perf/riscv_pmu_sbi.c | 27 ++++++++++++++++----------- include/linux/perf/riscv_pmu.h | 2 +- 3 files changed, 19 insertions(+), 14 deletions(-)
drivers/perf/riscv_pmu_legacy.c +2 -2
@@ -14,7 +14,6 @@#define RISCV_PMU_LEGACY_CYCLE 0#define RISCV_PMU_LEGACY_INSTRET 1 -#define RISCV_PMU_LEGACY_NUM_CTR 2static bool pmu_init_done;
@@ -83,7 +82,8 @@ static void pmu_legacy_init(struct riscv_pmu *pmu) {pr_info ("Legacy PMU implementation is available\n" ); - pmu->num_counters =RISCV_PMU_LEGACY_NUM_CTR ; + pmu->cmask =BIT (RISCV_PMU_LEGACY_CYCLE ) | +BIT (RISCV_PMU_LEGACY_INSTRET ); pmu->ctr_start = pmu_legacy_ctr_start; pmu->ctr_stop =NULL ; pmu->event_map = pmu_legacy_event_map;
drivers/perf/riscv_pmu_sbi.c +16 -11
@@ -271,7 +271,6 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)struct sbiret ret;int idx;uint64_t cbase =0 ; -uint64_t cmask =GENMASK_ULL (rvpmu->num_counters -1 ,0 );unsigned long cflags =0 ;if (event->attr.exclude_kernel)
@@ -281,11 +280,12 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)/* retrieve the available counter index */ #if defined(CONFIG_32BIT ) - ret =sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_CFG_MATCH , cbase, cmask, - cflags, hwc->event_base, hwc->config, hwc->config >>32 ); + ret =sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_CFG_MATCH , cbase, + rvpmu->cmask, cflags, hwc->event_base, hwc->config, + hwc->config >>32 );#else - ret =sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_CFG_MATCH , cbase, cmask, - cflags, hwc->event_base, hwc->config,0 ); + ret =sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_CFG_MATCH , cbase, + rvpmu->cmask, cflags, hwc->event_base, hwc->config,0 );#endif if (ret.error) { pr_debug("Not able to find a counter for event %lx config %llx\n",
@@ -294,7 +294,7 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event) } idx = ret.value; -if (idx >= rvpmu->num_counters || !pmu_ctr_list[idx].value) +if (!test_bit (idx, &rvpmu->cmask) || !pmu_ctr_list[idx].value)return -ENOENT ;/* Additional sanity check for the counter id */
@@ -463,7 +463,7 @@ static int pmu_sbi_find_num_ctrs(void)return sbi_err_map_linux_errno (ret.error); } -static int pmu_sbi_get_ctrinfo (int nctr) +static int pmu_sbi_get_ctrinfo (int nctr,unsigned long *mask) {struct sbiret ret;int i, num_hw_ctr =0 , num_fw_ctr =0 ;
@@ -478,6 +478,9 @@ static int pmu_sbi_get_ctrinfo(int nctr)if (ret.error)/* The logical counter ids are not expected to be contiguous */ continue ; + + *mask |=BIT (i); + cinfo.value = ret.value;if (cinfo.type ==SBI_PMU_CTR_TYPE_FW ) num_fw_ctr++;
@@ -498,7 +501,7 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu)* which may include counters that are not enabled yet. */ sbi_ecall (SBI_EXT_PMU ,SBI_EXT_PMU_COUNTER_STOP , -0 ,GENMASK_ULL (pmu->num_counters -1 ,0 ),0 ,0 ,0 ,0 ); +0 , pmu->cmask,0 ,0 ,0 ,0 ); }static inline void pmu_sbi_stop_hw_ctrs (struct riscv_pmu *pmu)
@@ -788,8 +791,9 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu)static int pmu_sbi_device_probe (struct platform_device *pdev) {struct riscv_pmu *pmu =NULL ; -int num_counters; +unsigned long cmask =0 ;int ret = -ENODEV ; +int num_counters;pr_info ("SBI PMU extension is available\n" ); pmu =riscv_pmu_alloc ();
@@ -803,7 +807,7 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) }/* cache all the information about counters now */ -if (pmu_sbi_get_ctrinfo (num_counters)) +if (pmu_sbi_get_ctrinfo (num_counters, &cmask)) goto out_free; ret =pmu_sbi_setup_irqs (pmu, pdev);
@@ -812,8 +816,9 @@ static int pmu_sbi_device_probe(struct platform_device *pdev) pmu->pmu.capabilities |=PERF_PMU_CAP_NO_INTERRUPT ; pmu->pmu.capabilities |=PERF_PMU_CAP_NO_EXCLUDE ; } + pmu->pmu.attr_groups = riscv_pmu_attr_groups; - pmu->num_counters = num_counters; + pmu->cmask = cmask; pmu->ctr_start = pmu_sbi_ctr_start; pmu->ctr_stop = pmu_sbi_ctr_stop; pmu->event_map = pmu_sbi_event_map;
include/linux/perf/riscv_pmu.h +1 -1
@@ -45,7 +45,7 @@ struct riscv_pmu {irqreturn_t (*handle_irq)(int irq_num,void *dev); -int num_counters; +unsigned long cmask;u64 (*ctr_read)(struct perf_event *event);int (*ctr_get_idx)(struct perf_event *event);int (*ctr_get_width)(int idx);
Signature · 7 lines
2.37.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
PATCH v3 3/3 perf: RISC-V: throttle perf events
In reply to Sergey MatyukevichFrom: Sergey Matyukevich <[email protected]>
Call perf_sample_event_took() to report time spent in overflow interrupts. Perf core uses these measurements to throttle perf events properly.
--- drivers/perf/riscv_pmu_sbi.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/perf/riscv_pmu_sbi.c +4 -0
@@ -18,6 +18,7 @@#include <linux/of_irq.h> #include <linux/of.h> #include <linux/cpu_pm.h> +#include <linux/sched/clock.h> #include <asm/sbi.h> #include <asm/hwcap.h>
@@ -570,6 +571,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)unsigned long overflow;unsigned long overflowed_ctrs =0 ;struct cpu_hw_events *cpu_hw_evt = dev; +u64 start_clock =sched_clock ();if (WARN_ON_ONCE (!cpu_hw_evt))return IRQ_NONE ;
@@ -638,7 +640,9 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)perf_event_overflow (event, &data, regs); } } +pmu_sbi_start_overflow_mask (pmu, overflowed_ctrs); +perf_sample_event_took (sched_clock () - start_clock);return IRQ_HANDLED ; }
Signature · 7 lines
2.37.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv