cpufreq: amd_pstate: Fix initial highest_perf value

PATCH Superseded Perry Yuan 2 participants 3 messages Aug 29, 2022 – Sep 6, 2022

Subsystems (2)

CPU frequency scaling framework AMD pstate driver

lore

Share & tools

lore

Perry Yuan

author reviewer

2022-08-29 05:59 UTC #0 lore raw

PATCH v2 1/1 cpufreq: amd_pstate: Fix initial highest_perf value

To avoid some new AMD processors use wrong highest perf when amd pstate driver loaded, this fix will query the highest perf from MSR register MSR_AMD_CPPC_CAP1 and cppc_acpi interface firstly, then compare with the highest perf value got by calling amd_get_highest_perf() function.

The lower value will be the correct highest perf we need to use. Otherwise the CPU max MHz will be incorrect if the amd_get_highest_perf() did not cover the new process family and model ID.

Like this lscpu info, the max frequency is incorrect.

Vendor ID:               AuthenticAMD
    Socket(s):           1
    Stepping:            2
    CPU max MHz:         5410.0000
    CPU min MHz:         400.0000
    BogoMIPS:            5600.54

Fixes 3743d55b289c2 (x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations)

Signed-off-by Perry Yuan <[email protected]>

---
 drivers/cpufreq/amd-pstate.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

drivers/cpufreq/amd-pstate.c +12 -2

index 9f4375f7ab46..30fbd30c0949 100644
@@ -354,6 +354,7 @@ static inline int amd_pstate_enable(bool enable)
 static int pstate_init_perf(struct amd_cpudata *cpudata)
 {
 	u64 cap1;
+	u32 highest_perf;
 
 	int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
 				     &cap1);

@@ -365,7 +366,11 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 	 *
 	 * CPPC entry doesn't indicate the highest performance in some ASICs.
 	 */
-	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+	highest_perf = amd_get_highest_perf();
+	if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1))
+		highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
+
+	WRITE_ONCE(cpudata->highest_perf, highest_perf);
 
 	WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));

@@ -377,12 +382,17 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 static int cppc_init_perf(struct amd_cpudata *cpudata)
 {
 	struct cppc_perf_caps cppc_perf;
+	u32 highest_perf;
 
 	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
 	if (ret)
 		return ret;
 
-	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+	highest_perf = amd_get_highest_perf();
+	if (highest_perf > cppc_perf.highest_perf)
+		highest_perf = cppc_perf.highest_perf;
+
+	WRITE_ONCE(cpudata->highest_perf, highest_perf);
 
 	WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf);
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf,

Signature · 1 line

2.34.1

Huang Rui

maintainer Acked-by on v2 1/1

2022-08-29 09:21 UTC #1 lore raw

Quoted 18 lines · Perry

To avoid some new AMD processors use wrong highest perf when amd pstate driver loaded, this fix will query the highest perf from MSR register MSR_AMD_CPPC_CAP1 and cppc_acpi interface firstly, then compare with the highest perf value got by calling amd_get_highest_perf() function.
The lower value will be the correct highest perf we need to use. Otherwise the CPU max MHz will be incorrect if the amd_get_highest_perf() did not cover the new process family and model ID.
Like this lscpu info, the max frequency is incorrect.
Vendor ID:               AuthenticAMD
    Socket(s):           1
    Stepping:            2
    CPU max MHz:         5410.0000
    CPU min MHz:         400.0000
    BogoMIPS:            5600.54

Quoted 2 lines

Fixes 3743d55b289c2 (x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations)
Signed-off-by Perry Yuan <[email protected]>

Acked-by Huang Rui <[email protected]>

Quoted 51 lines

---
 drivers/cpufreq/amd-pstate.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

drivers/cpufreq/amd-pstate.c +12 -2

index 9f4375f7ab46..30fbd30c0949 100644
@@ -354,6 +354,7 @@ static inline int amd_pstate_enable(bool enable)
 static int pstate_init_perf(struct amd_cpudata *cpudata)
 {
 	u64 cap1;
+	u32 highest_perf;
 
 	int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
 				     &cap1);

@@ -365,7 +366,11 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 	 *
 	 * CPPC entry doesn't indicate the highest performance in some ASICs.
 	 */
-	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+	highest_perf = amd_get_highest_perf();
+	if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1))
+		highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
+
+	WRITE_ONCE(cpudata->highest_perf, highest_perf);
 
 	WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));

@@ -377,12 +382,17 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 static int cppc_init_perf(struct amd_cpudata *cpudata)
 {
 	struct cppc_perf_caps cppc_perf;
+	u32 highest_perf;
 
 	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
 	if (ret)
 		return ret;
 
-	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+	highest_perf = amd_get_highest_perf();
+	if (highest_perf > cppc_perf.highest_perf)
+		highest_perf = cppc_perf.highest_perf;
+
+	WRITE_ONCE(cpudata->highest_perf, highest_perf);
 
 	WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf);
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf,

Signature · 1 line

2.34.1

Huang Rui

maintainer Acked-by on v2 1/1

2022-09-06 03:19 UTC #2 lore raw

In reply to Perry Yuan

Quoted 18 lines · Perry

To avoid some new AMD processors use wrong highest perf when amd pstate driver loaded, this fix will query the highest perf from MSR register MSR_AMD_CPPC_CAP1 and cppc_acpi interface firstly, then compare with the highest perf value got by calling amd_get_highest_perf() function.
The lower value will be the correct highest perf we need to use. Otherwise the CPU max MHz will be incorrect if the amd_get_highest_perf() did not cover the new process family and model ID.
Like this lscpu info, the max frequency is incorrect.
Vendor ID:               AuthenticAMD
    Socket(s):           1
    Stepping:            2
    CPU max MHz:         5410.0000
    CPU min MHz:         400.0000
    BogoMIPS:            5600.54

Quoted 2 lines

Fixes 3743d55b289c2 (x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations)
Signed-off-by Perry Yuan <[email protected]>

Acked-by Huang Rui <[email protected]>

Quoted 51 lines

---
 drivers/cpufreq/amd-pstate.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

drivers/cpufreq/amd-pstate.c +12 -2

index 9f4375f7ab46..30fbd30c0949 100644
@@ -354,6 +354,7 @@ static inline int amd_pstate_enable(bool enable)
 static int pstate_init_perf(struct amd_cpudata *cpudata)
 {
 	u64 cap1;
+	u32 highest_perf;
 
 	int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
 				     &cap1);

@@ -365,7 +366,11 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 	 *
 	 * CPPC entry doesn't indicate the highest performance in some ASICs.
 	 */
-	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+	highest_perf = amd_get_highest_perf();
+	if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1))
+		highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
+
+	WRITE_ONCE(cpudata->highest_perf, highest_perf);
 
 	WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));

@@ -377,12 +382,17 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 static int cppc_init_perf(struct amd_cpudata *cpudata)
 {
 	struct cppc_perf_caps cppc_perf;
+	u32 highest_perf;
 
 	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
 	if (ret)
 		return ret;
 
-	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+	highest_perf = amd_get_highest_perf();
+	if (highest_perf > cppc_perf.highest_perf)
+		highest_perf = cppc_perf.highest_perf;
+
+	WRITE_ONCE(cpudata->highest_perf, highest_perf);
 
 	WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf);
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf,

Signature · 1 line

2.34.1