Skip to contentSkip to conversation

asus-wmi: Increase FAN_CURVE_BUF_LEN to 32

PATCH In review Luke D. Jones 3 participants 4 messages Aug 28, 2022 – Sep 1, 2022

Subsystems (3)
lore
Share & tools
lore

Luke D. Jones

author maintainer
#0 lore raw

PATCH 1/1 asus-wmi: Increase FAN_CURVE_BUF_LEN to 32

Fix for TUF laptops returning with an -ENOSPC on calling asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method requires at least 32 bytes space.

This also moves and changes the pr_debug() in fan_curve_check_present() to pr_warn() in fan_curve_get_factory_default() so that there is at least some indication in logs of why it fails.

---
 drivers/platform/x86/asus-wmi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/platform/x86/asus-wmi.c +4 -5
index 3d9fd58573f9..11203213e00d 100644
@@ -108,7 +108,7 @@ module_param(fnlock_default, bool, 0444);
 #define WMI_EVENT_MASK			0xFFFF
 
 #define FAN_CURVE_POINTS		8
-#define FAN_CURVE_BUF_LEN		(FAN_CURVE_POINTS * 2)
+#define FAN_CURVE_BUF_LEN		32
 #define FAN_CURVE_DEV_CPU		0x00
 #define FAN_CURVE_DEV_GPU		0x01
 /* Mask to determine if setting temperature or percentage */
@@ -2383,8 +2383,10 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
 	curves = &asus->custom_fan_curves[fan_idx];
 	err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf,
 					   FAN_CURVE_BUF_LEN);
-	if (err)
+	if (err) {
+		pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err);
 		return err;
+	}
 
 	fan_curve_copy_from_buf(curves, buf);
 	curves->device_id = fan_dev;
@@ -2402,9 +2404,6 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
 
 	err = fan_curve_get_factory_default(asus, fan_dev);
 	if (err) {
-		pr_debug("fan_curve_get_factory_default(0x%08x) failed: %d\n",
-			 fan_dev, err);
-		/* Don't cause probe to fail on devices without fan-curves */
 		return 0;
 	}
 
Signature · 1 line
2.37.2
maintainer
#1 lore raw
Quoted 39 lines · Luke D. Jones

Fix for TUF laptops returning with an -ENOSPC on calling asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method requires at least 32 bytes space.

This also moves and changes the pr_debug() in fan_curve_check_present() to pr_warn() in fan_curve_get_factory_default() so that there is at least some indication in logs of why it fails.

---
 drivers/platform/x86/asus-wmi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/platform/x86/asus-wmi.c +4 -2
index 3d9fd58573f9..11203213e00d 100644
@@ -108,7 +108,7 @@ module_param(fnlock_default, bool, 0444);
 #define WMI_EVENT_MASK			0xFFFF
 
 #define FAN_CURVE_POINTS		8
-#define FAN_CURVE_BUF_LEN		(FAN_CURVE_POINTS * 2)
+#define FAN_CURVE_BUF_LEN		32
 #define FAN_CURVE_DEV_CPU		0x00
 #define FAN_CURVE_DEV_GPU		0x01
 /* Mask to determine if setting temperature or percentage */
@@ -2383,8 +2383,10 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
 	curves = &asus->custom_fan_curves[fan_idx];
 	err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf,
 					   FAN_CURVE_BUF_LEN);
-	if (err)
+	if (err) {
+		pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err);
 		return err;
+	}
 
 	fan_curve_copy_from_buf(curves, buf);
 	curves->device_id = fan_dev;

drivers/platform/x86/asus-wmi.c static int fan_curve_check_present(struct asus_wmi *asus, bool *available, · line 2407

Quoted 6 lines
drivers/platform/x86/asus-wmi.c +0 -3
@@ -2402,9 +2404,6 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
 
 	err = fan_curve_get_factory_default(asus, fan_dev);
 	if (err) {
-		pr_debug("fan_curve_get_factory_default(0x%08x) failed: %d\n",
-			 fan_dev, err);
-		/* Don't cause probe to fail on devices without fan-curves */

The pr_warn() should be here. If you want to have a message from the call in fan_curve_enable_store(), add dev_err() there.

Guenter

Quoted 3 lines
drivers/platform/x86/asus-wmi.c +0 -0
 		return 0;
 	}
 
#2 lore raw

Hi All,

Quoted 41 lines · Guenter Roeck
Quoted 40 lines · Luke D. Jones

Fix for TUF laptops returning with an -ENOSPC on calling asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method requires at least 32 bytes space.

This also moves and changes the pr_debug() in fan_curve_check_present() to pr_warn() in fan_curve_get_factory_default() so that there is at least some indication in logs of why it fails.

---
 drivers/platform/x86/asus-wmi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/platform/x86/asus-wmi.c +4 -2
index 3d9fd58573f9..11203213e00d 100644
@@ -108,7 +108,7 @@ module_param(fnlock_default, bool, 0444);
 #define WMI_EVENT_MASK			0xFFFF
 
 #define FAN_CURVE_POINTS		8
-#define FAN_CURVE_BUF_LEN		(FAN_CURVE_POINTS * 2)
+#define FAN_CURVE_BUF_LEN		32
 #define FAN_CURVE_DEV_CPU		0x00
 #define FAN_CURVE_DEV_GPU		0x01
 /* Mask to determine if setting temperature or percentage */
@@ -2383,8 +2383,10 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
 	curves = &asus->custom_fan_curves[fan_idx];
 	err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf,
 					   FAN_CURVE_BUF_LEN);
-	if (err)
+	if (err) {
+		pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err);
 		return err;
+	}
 
 	fan_curve_copy_from_buf(curves, buf);
 	curves->device_id = fan_dev;
@@ -2402,9 +2404,6 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
 
Quoted 8 lines

drivers/platform/x86/asus-wmi.c static int fan_curve_check_present(struct asus_wmi *asus, bool *available, · line 2407

Quoted 5 lines
drivers/platform/x86/asus-wmi.c +0 -3
 	err = fan_curve_get_factory_default(asus, fan_dev);
 	if (err) {
-		pr_debug("fan_curve_get_factory_default(0x%08x) failed: %d\n",
-			 fan_dev, err);
-		/* Don't cause probe to fail on devices without fan-curves */

The pr_warn() should be here. If you want to have a message from the call in fan_curve_enable_store(), add dev_err() there.

Guenter I can understand where you are coming from with the warn vs err thing but IMHO that is a minor concern and I'm actually a fan of pushing error logging closer to the first failing call so that we only have one place to log the error instead of having to log it separately in all the callers.

So I'm going to take this patch as is.

Regards,

Hans

#3 lore raw
In reply to Luke D. Jones

Hi,

Quoted 9 lines · Luke D. Jones

Fix for TUF laptops returning with an -ENOSPC on calling asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method requires at least 32 bytes space.

This also moves and changes the pr_debug() in fan_curve_check_present() to pr_warn() in fan_curve_get_factory_default() so that there is at least some indication in logs of why it fails.

Thank you for your patch, I've applied this patch to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

Quoted 39 lines
---
 drivers/platform/x86/asus-wmi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/platform/x86/asus-wmi.c +4 -5
index 3d9fd58573f9..11203213e00d 100644
@@ -108,7 +108,7 @@ module_param(fnlock_default, bool, 0444);
 #define WMI_EVENT_MASK			0xFFFF
 
 #define FAN_CURVE_POINTS		8
-#define FAN_CURVE_BUF_LEN		(FAN_CURVE_POINTS * 2)
+#define FAN_CURVE_BUF_LEN		32
 #define FAN_CURVE_DEV_CPU		0x00
 #define FAN_CURVE_DEV_GPU		0x01
 /* Mask to determine if setting temperature or percentage */
@@ -2383,8 +2383,10 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
 	curves = &asus->custom_fan_curves[fan_idx];
 	err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf,
 					   FAN_CURVE_BUF_LEN);
-	if (err)
+	if (err) {
+		pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err);
 		return err;
+	}
 
 	fan_curve_copy_from_buf(curves, buf);
 	curves->device_id = fan_dev;
@@ -2402,9 +2404,6 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
 
 	err = fan_curve_get_factory_default(asus, fan_dev);
 	if (err) {
-		pr_debug("fan_curve_get_factory_default(0x%08x) failed: %d\n",
-			 fan_dev, err);
-		/* Don't cause probe to fail on devices without fan-curves */
 		return 0;
 	}