arch: arm : mach-socfpga: Add mailbox command for HPS execution stage notification
Subsystems (3)
PATCH 1/1 arch: arm : mach-socfpga: Add mailbox command for HPS execution stage notification
From: Chin Liang See <[email protected]>
Add a new mailbox command "HPS_STAGE_NOTIFY" to notify Secure Device Manager (SDM) on the stage of HPS code execution. In general, there are three main code execution stages: First Stage Boot Loader (FSBL) which is U-Boot SPL, Second Stage Boot Loader (SSBL) which is U-Boot, and the Operating System which is Linux
Signed-off-by Chin Liang See <[email protected]>
Signed-off-by Jit Loon Lim <[email protected]>
--- arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 7 +++++++ arch/arm/mach-socfpga/mailbox_s10.c | 6 ++++++ 2 files changed, 13 insertions(+)
arch/arm/mach-socfpga/include/mach/mailbox_s10.h +7 -0
@@ -123,6 +123,7 @@ enum ALT_SDM_MBOX_RESP_CODE {#define MBOX_QSPI_CLOSE 51#define MBOX_QSPI_DIRECT 59#define MBOX_REBOOT_HPS 71 +#define MBOX_HPS_STAGE_NOTIFY 93/* Mailbox registers */ #define MBOX_CIN 0/* command valid offset */
@@ -166,6 +167,11 @@ enum ALT_SDM_MBOX_RESP_CODE {#define RCF_SOFTFUNC_STATUS_SEU_ERROR BIT(3)#define RCF_PIN_STATUS_NSTATUS BIT(31) +/* Defines for HPS_STAGE_NOTIFY */ +#define HPS_EXECUTION_STATE_FSBL 0 +#define HPS_EXECUTION_STATE_SSBL 1 +#define HPS_EXECUTION_STATE_OS 2 +int mbox_send_cmd (u8 id,u32 cmd,u8 is_indirect,u32 len,u32 *arg,u8 urgent,u32 *resp_buf_len,u32 *resp_buf); int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
@@ -182,6 +188,7 @@ int mbox_qspi_open(void);#endif int mbox_reset_cold (void ); +int mbox_hps_stage_notify (u32 execution_stage);int mbox_get_fpga_config_status (u32 cmd);int mbox_get_fpga_config_status_psci (u32 cmd);#endif /* _MAILBOX_S10_H_ */
arch/arm/mach-socfpga/mailbox_s10.c +6 -0
@@ -479,6 +479,12 @@ int __secure mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, urgent, resp_buf_len, resp_buf); } +int mbox_hps_stage_notify (u32 execution_stage) +{ +return mbox_send_cmd (MBOX_ID_UBOOT ,MBOX_HPS_STAGE_NOTIFY , +MBOX_CMD_DIRECT ,1 , &execution_stage,0 ,0 ,NULL ); +} +int mbox_send_cmd_only (u8 id,u32 cmd,u8 is_indirect,u32 len,u32 *arg) {return mbox_send_cmd_only_common (id, cmd, is_indirect, len, arg);
Signature · 1 line
2.26.2