Skip to contentSkip to conversation

arch: arm: mach-socfpga: Add mailbox command for HPS execution stage notification

PATCH In review Jit Loon Lim 2 participants 2 messages Aug 30, 2022 – Sep 9, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arch: arm: mach-socfpga: Add mailbox command for HPS execution stage notification

From: Chin Liang See <[email protected]>

Add a new mailbox command "HPS_STAGE_NOTIFY" to notify Secure Device Manager (SDM) on the stage of HPS code execution. In general, there are three main code execution stages: First Stage Boot Loader (FSBL) which is U-Boot SPL, Second Stage Boot Loader (SSBL) which is U-Boot, and the Operating System which is Linux

---
 arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 7 +++++++
 arch/arm/mach-socfpga/mailbox_s10.c              | 6 ++++++
 2 files changed, 13 insertions(+)
arch/arm/mach-socfpga/include/mach/mailbox_s10.h +7 -0
index fbaf11597e..87af6f1cfe 100644
@@ -123,6 +123,7 @@ enum ALT_SDM_MBOX_RESP_CODE {
 #define MBOX_QSPI_CLOSE		51
 #define MBOX_QSPI_DIRECT	59
 #define MBOX_REBOOT_HPS		71
+#define MBOX_HPS_STAGE_NOTIFY		93
 
 /* Mailbox registers */
 #define MBOX_CIN			0	/* command valid offset */
@@ -166,6 +167,11 @@ enum ALT_SDM_MBOX_RESP_CODE {
 #define RCF_SOFTFUNC_STATUS_SEU_ERROR			BIT(3)
 #define RCF_PIN_STATUS_NSTATUS				BIT(31)
 
+/* Defines for HPS_STAGE_NOTIFY */
+#define HPS_EXECUTION_STATE_FSBL	0
+#define HPS_EXECUTION_STATE_SSBL	1
+#define HPS_EXECUTION_STATE_OS	2
+
 int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
 		  u32 *resp_buf_len, u32 *resp_buf);
 int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
@@ -182,6 +188,7 @@ int mbox_qspi_open(void);
 #endif
 
 int mbox_reset_cold(void);
+int mbox_hps_stage_notify(u32 execution_stage);
 int mbox_get_fpga_config_status(u32 cmd);
 int mbox_get_fpga_config_status_psci(u32 cmd);
 #endif /* _MAILBOX_S10_H_ */
arch/arm/mach-socfpga/mailbox_s10.c +6 -0
index 101af23855..e86d9bf214 100644
@@ -479,6 +479,12 @@ int __secure mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len,
 					  urgent, resp_buf_len, resp_buf);
 }
 
+int mbox_hps_stage_notify(u32 execution_stage)
+{
+	return mbox_send_cmd(MBOX_ID_UBOOT, MBOX_HPS_STAGE_NOTIFY,
+			     MBOX_CMD_DIRECT, 1, &execution_stage, 0, 0, NULL);
+}
+
 int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg)
 {
 	return mbox_send_cmd_only_common(id, cmd, is_indirect, len, arg);
Signature · 1 line
2.26.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 82 lines

-----Original Message-----
From: Lim, Jit Loon <[email protected]>
Sent: Wednesday, 31 August, 2022 1:16 AM
To: [email protected]
Cc: Jagan Teki <[email protected]>; Vignesh R <[email protected]>; Vasut, Marek <[email protected]>; Simon <[email protected]>; Chee, Tien Fong <[email protected]>; Hea, Kok Kiang <[email protected]>; Lim, Elly Siew Chin <[email protected]>; Kho, Sin Hui <[email protected]>; Lokanathan, Raaj <[email protected]>; Maniyam, Dinesh <[email protected]>; Ng, Boon Khai <[email protected]>; Yuslaimi, Alif Zakuan <[email protected]>; Chong, Teik Heng <[email protected]>; Zamri, Muhammad Hazim Izzat <[email protected]>; Tang, Sieu Mun <[email protected]>; Lim, Jit Loon <[email protected]>; Chin Liang See <[email protected]>
Subject: [PATCH] arch: arm: mach-socfpga: Add mailbox command for HPS execution stage notification

From: Chin Liang See <[email protected]>

Add a new mailbox command "HPS_STAGE_NOTIFY" to notify Secure Device Manager (SDM) on the stage of HPS code execution. In general, there are three main code execution stages: First Stage Boot Loader (FSBL) which is U-Boot SPL, Second Stage Boot Loader (SSBL) which is U-Boot, and the Operating System which is Linux

---
 arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 7 +++++++
 arch/arm/mach-socfpga/mailbox_s10.c              | 6 ++++++
 2 files changed, 13 insertions(+)
arch/arm/mach-socfpga/include/mach/mailbox_s10.h +7 -1
index fbaf11597e..87af6f1cfe 100644
@@ -123,6 +123,7 @@ enum ALT_SDM_MBOX_RESP_CODE {
 #define MBOX_QSPI_CLOSE		51
 #define MBOX_QSPI_DIRECT	59
 #define MBOX_REBOOT_HPS		71
+#define MBOX_HPS_STAGE_NOTIFY		93
 
 /* Mailbox registers */
 #define MBOX_CIN			0	/* command valid offset */
@@ -166,6 +167,11 @@ enum ALT_SDM_MBOX_RESP_CODE {
 #define RCF_SOFTFUNC_STATUS_SEU_ERROR			BIT(3)
 #define RCF_PIN_STATUS_NSTATUS				BIT(31)
 
+/* Defines for HPS_STAGE_NOTIFY */
+#define HPS_EXECUTION_STATE_FSBL	0
+#define HPS_EXECUTION_STATE_SSBL	1
+#define HPS_EXECUTION_STATE_OS	2
+
 int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
 		  u32 *resp_buf_len, u32 *resp_buf);
 int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, @@
-182,6 +188,7 @@ int mbox_qspi_open(void);  #endif
 
 int mbox_reset_cold(void);
+int mbox_hps_stage_notify(u32 execution_stage);
 int mbox_get_fpga_config_status(u32 cmd);  int

mbox_get_fpga_config_status_psci(u32 cmd); #endif /* _MAILBOX_S10_H_ */

arch/arm/mach- renamed from arch/arm/mach-socfpga/mailbox_s10.c +0 -0

socfpga/mailbox_s10.c
index 101af23855..e86d9bf214 100644

arch/arm/mach-socfpga/mailbox_s10.c +4 -1
@@ -479,6 +479,12 @@ int __secure mbox_send_cmd_psci(u8 id, u32 cmd, u8
 is_indirect, u32 len,
 					  urgent, resp_buf_len, resp_buf);  }
 
+int mbox_hps_stage_notify(u32 execution_stage) {
+	return mbox_send_cmd(MBOX_ID_UBOOT, MBOX_HPS_STAGE_NOTIFY,
+			     MBOX_CMD_DIRECT, 1, &execution_stage, 0, 0,
 NULL); }
+
 int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg)  {
 	return mbox_send_cmd_only_common(id, cmd, is_indirect, len, arg);
--
Quoted 1 line

2.26.2

Regards
Tien Fong