tpm: Preserve TPM measurement log across kexec (ppc64)
Subsystems (6)
v8 cover tpm: Preserve TPM measurement log across kexec (ppc64)
The of-tree subsystem does not currently preserve the IBM vTPM 1.2 and vTPM 2.0 measurement logs across a kexec on PowerVM and PowerKVM. This series fixes this for the kexec_file_load() syscall using the flattened device tree (fdt) to carry the TPM measurement log's buffer across kexec.
Stefan
v8:
- Added Jarkko's, Coiby's, and Rob's tags
- Rebase on v6.0-rc3 that absorbed 2 already upstreamed patches
v7:
- Added Nageswara's Tested-by tags
- Added back original comment to inline function and removed Jarkko's R-b tag
v6:
- Add __init to get_kexec_buffer as suggested by Jonathan
- Fixed issue detected by kernel test robot
v5:
- Rebased on 1 more patch that would otherwise create merge conflicts
v4:
- Rebased on 2 patches that would otherwise create merge conflicts; posting these patches in this series with several tags removed so krobot can test the series already
- Changes to individual patches documented in patch descripitons
v3:
- Moved TPM Open Firmware related function to drivers/char/tpm/eventlog/tpm_of.c
v2:
- rearranged patches
- fixed compilation issues for x86
Palmer Dabbelt (1):
drivers: of: kexec ima: Support 32-bit platforms
Stefan Berger (3):
tpm: of: Make of-tree specific function commonly available
of: kexec: Refactor IMA buffer related functions to make them reusable tpm/kexec: Duplicate TPM measurement log in of-tree for kexec
drivers/char/tpm/eventlog/of.c | 31 +-- drivers/of/kexec.c | 336 ++++++++++++++++++++++++++++----- include/linux/kexec.h | 6 + include/linux/of.h | 9 +- include/linux/tpm.h | 36 ++++ kernel/kexec_file.c | 6 + 6 files changed, 346 insertions(+), 78 deletions(-)
base-commit: b90cb1053190353cc30f0fef0ef1f378ccc063c5
Signature · 1 line
2.35.1
PATCH v8 1/4 drivers: of: kexec ima: Support 32-bit platforms
From: Palmer Dabbelt <[email protected]>
RISC-V recently added kexec_file() support, which uses enables kexec IMA. We're the first 32-bit platform to support this, so we found a build bug.
--- drivers/of/kexec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/of/kexec.c +2 -2
@@ -250,8 +250,8 @@ static int setup_ima_buffer(const struct kimage *image, void *fdt,if (ret)return -EINVAL ; -pr_debug ("IMA buffer at 0x%llx, size = 0x%zx\n" , - image->ima_buffer_addr, image->ima_buffer_size); +pr_debug ("IMA buffer at 0x%pa, size = 0x%zx\n" , + &image->ima_buffer_addr, image->ima_buffer_size);return 0 ; }
Signature · 7 lines
2.35.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
PATCH v8 2/4 tpm: of: Make of-tree specific function commonly available
In reply to Stefan BergerSimplify tpm_read_log_of() by moving reusable parts of the code into an inline function that makes it commonly available so it can be used also for kexec support. Call the new of_tpm_get_sml_parameters() function from the TPM Open Firmware driver.
---
v7:
- Added original comment back into inlined function
v4:
- converted to inline function
--- drivers/char/tpm/eventlog/of.c | 31 +++++------------------------ include/linux/tpm.h | 36 ++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 26 deletions(-)
drivers/char/tpm/eventlog/of.c +5 -26
@@ -12,6 +12,7 @@#include <linux/slab.h> #include <linux/of.h> +#include <linux/tpm.h> #include <linux/tpm_eventlog.h> #include "../tpm.h"
@@ -20,11 +21,10 @@int tpm_read_log_of (struct tpm_chip *chip) {struct device_node *np; -const u32 *sizep; -const u64 *basep;struct tpm_bios_log *log;u32 size;u64 base; +int ret; log = &chip->log;if (chip->dev.parent && chip->dev.parent->of_node)
@@ -35,30 +35,9 @@ int tpm_read_log_of(struct tpm_chip *chip)if (of_property_read_bool (np,"powered-while-suspended" )) chip->flags |=TPM_CHIP_FLAG_ALWAYS_POWERED ; - sizep =of_get_property (np,"linux,sml-size" ,NULL ); - basep =of_get_property (np,"linux,sml-base" ,NULL ); -if (sizep ==NULL && basep ==NULL ) -return -ENODEV ; -if (sizep ==NULL || basep ==NULL ) -return -EIO ; - -/* -* For both vtpm/tpm, firmware has log addr and log size in big -* endian format. But in case of vtpm, there is a method called -* sml-handover which is run during kernel init even before -* device tree is setup. This sml-handover function takes care -* of endianness and writes to sml-base and sml-size in little -* endian format. For this reason, vtpm doesn't need conversion -* but physical tpm needs the conversion. -*/ -if (of_property_match_string (np,"compatible" ,"IBM,vtpm" ) <0 && -of_property_match_string (np,"compatible" ,"IBM,vtpm20" ) <0 ) { - size =be32_to_cpup ((__force __be32 *)sizep); - base =be64_to_cpup ((__force __be64 *)basep); - }else { - size = *sizep; - base = *basep; - } + ret =of_tpm_get_sml_parameters (np, &base, &size); +if (ret <0 ) +return ret;if (size ==0 ) {dev_warn (&chip->dev,"%s: Event log area empty\n" , __func__);
include/linux/tpm.h +36 -0
@@ -460,4 +460,40 @@ static inline struct tpm_chip *tpm_default_chip(void)return NULL ; }#endif + +#ifdef CONFIG_OF +static inline int of_tpm_get_sml_parameters (struct device_node *np, +u64 *base,u32 *size) +{ +const u32 *sizep; +const u64 *basep; + + sizep =of_get_property (np,"linux,sml-size" ,NULL ); + basep =of_get_property (np,"linux,sml-base" ,NULL ); +if (sizep ==NULL && basep ==NULL ) +return -ENODEV ; +if (sizep ==NULL || basep ==NULL ) +return -EIO ; + +/* +* For both vtpm/tpm, firmware has log addr and log size in big +* endian format. But in case of vtpm, there is a method called +* sml-handover which is run during kernel init even before +* device tree is setup. This sml-handover function takes care +* of endianness and writes to sml-base and sml-size in little +* endian format. For this reason, vtpm doesn't need conversion +* but physical tpm needs the conversion. +*/ +if (of_property_match_string (np,"compatible" ,"IBM,vtpm" ) <0 && +of_property_match_string (np,"compatible" ,"IBM,vtpm20" ) <0 ) { + *size =be32_to_cpup ((__force __be32 *)sizep); + *base =be64_to_cpup ((__force __be64 *)basep); + }else { + *size = *sizep; + *base = *basep; + } +return 0 ; +} +#endif +#endif
Signature · 1 line
2.35.1
Re: [PATCH v8 2/4] tpm: of: Make of-tree specific function commonly available
Quoted 133 lines · Stefan Berger
Simplify
tpm_read_log_of()by moving reusable parts of the code into an inline function that makes it commonly available so it can be used also for kexec support. Call the newof_tpm_get_sml_parameters()function from the TPM Open Firmware driver.Signed-off-by Stefan Berger <[email protected]>Cc Jarkko Sakkinen <[email protected]>Cc Jason Gunthorpe <[email protected]>Cc Rob Herring <[email protected]>Cc Frank Rowand <[email protected]>Reviewed-by Mimi Zohar <[email protected]>Tested-by Nageswara R Sastry <[email protected]>Reviewed-by Jarkko Sakkinen <[email protected]>Tested-by Coiby Xu <[email protected]>---
v7:
- Added original comment back into inlined functionv4:
- converted to inline function--- drivers/char/tpm/eventlog/of.c | 31 +++++------------------------ include/linux/tpm.h | 36 ++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 26 deletions(-)drivers/char/tpm/eventlog/of.c +5
-26@@ -12,6 +12,7 @@#include <linux/slab.h> #include <linux/of.h> +#include <linux/tpm.h> #include <linux/tpm_eventlog.h> #include "../tpm.h" @@ -20,11 +21,10 @@int tpm_read_log_of (struct tpm_chip *chip) {struct device_node *np; -const u32 *sizep; -const u64 *basep;struct tpm_bios_log *log;u32 size;u64 base; +int ret; log = &chip->log;if (chip->dev.parent && chip->dev.parent->of_node)@@ -35,30 +35,9 @@ int tpm_read_log_of(struct tpm_chip *chip)if (of_property_read_bool (np,"powered-while-suspended" )) chip->flags |=TPM_CHIP_FLAG_ALWAYS_POWERED ; - sizep =of_get_property (np,"linux,sml-size" ,NULL ); - basep =of_get_property (np,"linux,sml-base" ,NULL ); -if (sizep ==NULL && basep ==NULL ) -return -ENODEV ; -if (sizep ==NULL || basep ==NULL ) -return -EIO ; - -/* -* For both vtpm/tpm, firmware has log addr and log size in big -* endian format. But in case of vtpm, there is a method called -* sml-handover which is run during kernel init even before -* device tree is setup. This sml-handover function takes care -* of endianness and writes to sml-base and sml-size in little -* endian format. For this reason, vtpm doesn't need conversion -* but physical tpm needs the conversion. -*/ -if (of_property_match_string (np,"compatible" ,"IBM,vtpm" ) <0 && -of_property_match_string (np,"compatible" ,"IBM,vtpm20" ) <0 ) { - size =be32_to_cpup ((__force __be32 *)sizep); - base =be64_to_cpup ((__force __be64 *)basep); - }else { - size = *sizep; - base = *basep; - } + ret =of_tpm_get_sml_parameters (np, &base, &size); +if (ret <0 ) +return ret;if (size ==0 ) {dev_warn (&chip->dev,"%s: Event log area empty\n" , __func__);include/linux/tpm.h +36
-0@@ -460,4 +460,40 @@ static inline struct tpm_chip *tpm_default_chip(void)return NULL ; }#endif + +#ifdef CONFIG_OF +static inline int of_tpm_get_sml_parameters (struct device_node *np, +u64 *base,u32 *size) +{ +const u32 *sizep; +const u64 *basep; + + sizep =of_get_property (np,"linux,sml-size" ,NULL ); + basep =of_get_property (np,"linux,sml-base" ,NULL ); +if (sizep ==NULL && basep ==NULL ) +return -ENODEV ; +if (sizep ==NULL || basep ==NULL ) +return -EIO ; + +/* +* For both vtpm/tpm, firmware has log addr and log size in big +* endian format. But in case of vtpm, there is a method called +* sml-handover which is run during kernel init even before +* device tree is setup. This sml-handover function takes care +* of endianness and writes to sml-base and sml-size in little +* endian format. For this reason, vtpm doesn't need conversion +* but physical tpm needs the conversion. +*/ +if (of_property_match_string (np,"compatible" ,"IBM,vtpm" ) <0 && +of_property_match_string (np,"compatible" ,"IBM,vtpm20" ) <0 ) { + *size =be32_to_cpup ((__force __be32 *)sizep); + *base =be64_to_cpup ((__force __be64 *)basep); + }else { + *size = *sizep; + *base = *basep; + } +return 0 ; +} +#endif +#endif Signature · 1 line
2.35.1
BR, Jarkko
PATCH v8 3/4 of: kexec: Refactor IMA buffer related functions to make them reusable
In reply to Stefan BergerRefactor IMA buffer related functions to make them reusable for carrying TPM logs across kexec.
---
v6:
- Add __init to get_kexec_buffer as suggested by Jonathan
v5:
- Rebased on Jonathan McDowell's commit "b69a2afd5afc x86/kexec: Carry forward IMA measurement log on kexec"
v4:
- Move debug output into setup_buffer()
--- drivers/of/kexec.c | 126 ++++++++++++++++++++++++++------------------- 1 file changed, 74 insertions(+), 52 deletions(-)
drivers/of/kexec.c +74 -52
@@ -117,45 +117,57 @@ static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, }#ifdef CONFIG_HAVE_IMA_KEXEC -/** -* ima_get_kexec_buffer - get IMA buffer from the previous kernel -* @addr: On successful return, set to point to the buffer contents. -* @size: On successful return, set to the buffer size. -* -* Return: 0 on success, negative errno on error. -*/ -int __init ima_get_kexec_buffer (void **addr,size_t *size) +static int __init get_kexec_buffer (const char *name,unsigned long *addr, +size_t *size) {int ret, len; -unsigned long tmp_addr;unsigned long start_pfn, end_pfn; -size_t tmp_size;const void *prop; - prop =of_get_property (of_chosen,"linux,ima-kexec-buffer" , &len); + prop =of_get_property (of_chosen, name, &len);if (!prop)return -ENOENT ; - ret =do_get_kexec_buffer (prop, len, &tmp_addr, &tmp_size); + ret =do_get_kexec_buffer (prop, len, addr, size);if (ret)return ret; -/* Do some sanity on the returned size for the ima-kexec buffer */ -if (!tmp_size) +/* Do some sanity on the returned size for the kexec buffer */ +if (!*size)return -ENOENT ;/* * Calculate the PFNs for the buffer and ensure * they are with in addressable memory. */ - start_pfn =PHYS_PFN (tmp_addr); - end_pfn =PHYS_PFN (tmp_addr + tmp_size -1 ); + start_pfn =PHYS_PFN (*addr); + end_pfn =PHYS_PFN (*addr + *size -1 );if (!page_is_ram (start_pfn) || !page_is_ram (end_pfn)) { -pr_warn ("IMA buffer at 0x%lx, size = 0x%zx beyond memory\n" , - tmp_addr, tmp_size); +pr_warn ("%s buffer at 0x%lx, size = 0x%zx beyond memory\n" , + name, *addr, *size);return -EINVAL ; } +return 0 ; +} + +/** +* ima_get_kexec_buffer - get IMA buffer from the previous kernel +* @addr: On successful return, set to point to the buffer contents. +* @size: On successful return, set to the buffer size. +* +* Return: 0 on success, negative errno on error. +*/ +int __init ima_get_kexec_buffer (void **addr,size_t *size) +{ +int ret; +unsigned long tmp_addr; +size_t tmp_size; + + ret =get_kexec_buffer ("linux,ima-kexec-buffer" , &tmp_addr, &tmp_size); +if (ret) +return ret; + *addr =__va (tmp_addr); *size = tmp_size;
@@ -188,72 +200,82 @@ int __init ima_free_kexec_buffer(void) }#endif -/** -* remove_ima_buffer - remove the IMA buffer property and reservation from @fdt -* -* @fdt: Flattened Device Tree to update -* @chosen_node: Offset to the chosen node in the device tree -* -* The IMA measurement buffer is of no use to a subsequent kernel, so we always -* remove it from the device tree. -*/ -static void remove_ima_buffer (void *fdt,int chosen_node) +static int remove_buffer (void *fdt,int chosen_node,const char *name) {int ret, len;unsigned long addr;size_t size;const void *prop; -if (!IS_ENABLED (CONFIG_HAVE_IMA_KEXEC )) -return ; - - prop =fdt_getprop (fdt, chosen_node,"linux,ima-kexec-buffer" , &len); + prop =fdt_getprop (fdt, chosen_node, name, &len);if (!prop) -return ; +return -ENOENT ; ret =do_get_kexec_buffer (prop, len, &addr, &size); -fdt_delprop (fdt, chosen_node,"linux,ima-kexec-buffer" ); +fdt_delprop (fdt, chosen_node, name);if (ret) -return ; +return ret; ret =fdt_find_and_del_mem_rsv (fdt, addr, size);if (!ret) -pr_debug ("Removed old IMA buffer reservation.\n" ); +pr_debug ("Remove old %s buffer reserveration" , name); +return ret; } -#ifdef CONFIG_IMA_KEXEC /** -* setup_ima_buffer - add IMA buffer information to the fdt -* @image: kexec image being loaded. -* @fdt: Flattened device tree for the next kernel. -* @chosen_node: Offset to the chosen node. +* remove_ima_buffer - remove the IMA buffer property and reservation from @fdt * -* Return: 0 on success, or negative errno on error. +* @fdt: Flattened Device Tree to update +* @chosen_node: Offset to the chosen node in the device tree +* +* The IMA measurement buffer is of no use to a subsequent kernel, so we always +* remove it from the device tree. */ -static int setup_ima_buffer (const struct kimage *image,void *fdt, -int chosen_node) +static void remove_ima_buffer (void *fdt,int chosen_node) +{ +if (!IS_ENABLED (CONFIG_HAVE_IMA_KEXEC )) +return ; + +remove_buffer (fdt, chosen_node,"linux,ima-kexec-buffer" ); +} + +#ifdef CONFIG_IMA_KEXEC +static int setup_buffer (void *fdt,int chosen_node,const char *name, +phys_addr_t addr,size_t size) {int ret; -if (!image->ima_buffer_size) +if (!size)return 0 ; ret =fdt_appendprop_addrrange (fdt,0 , chosen_node, -"linux,ima-kexec-buffer" , - image->ima_buffer_addr, - image->ima_buffer_size); + name, addr, size);if (ret <0 )return -EINVAL ; - ret =fdt_add_mem_rsv (fdt, image->ima_buffer_addr, - image->ima_buffer_size); + ret =fdt_add_mem_rsv (fdt, addr, size);if (ret)return -EINVAL ; -pr_debug ("IMA buffer at 0x%pa, size = 0x%zx\n" , - &image->ima_buffer_addr, image->ima_buffer_size); +pr_debug ("%s at 0x%pa, size = 0x%zx\n" , name, &addr, size);return 0 ; + +} + +/** +* setup_ima_buffer - add IMA buffer information to the fdt +* @image: kexec image being loaded. +* @fdt: Flattened device tree for the next kernel. +* @chosen_node: Offset to the chosen node. +* +* Return: 0 on success, or negative errno on error. +*/ +static int setup_ima_buffer (const struct kimage *image,void *fdt, +int chosen_node) +{ +return setup_buffer (fdt, chosen_node,"linux,ima-kexec-buffer" , + image->ima_buffer_addr, image->ima_buffer_size); }#else /* CONFIG_IMA_KEXEC */ static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
Signature · 1 line
2.35.1
PATCH v8 4/4 tpm/kexec: Duplicate TPM measurement log in of-tree for kexec
In reply to Stefan BergerThe memory area of the TPM measurement log is currently not properly duplicated for carrying it across kexec when an Open Firmware Devicetree is used. Therefore, the contents of the log get corrupted. Fix this for the kexec_file_load() syscall by allocating a buffer and copying the contents of the existing log into it. The new buffer is preserved across the kexec and a pointer to it is available when the new kernel is started. To achieve this, store the allocated buffer's address in the flattened device tree (fdt) under the name linux,tpm-kexec-buffer and search for this entry early in the kernel startup before the TPM subsystem starts up. Adjust the pointer in the of-tree stored under linux,sml-base to point to this buffer holding the preserved log. The TPM driver can then read the base address from this entry when making the log available. Invalidate the log by removing 'linux,sml-base' from the devicetree if anything goes wrong with updating the buffer.
Use subsys_initcall() to call the function to restore the buffer even if the TPM subsystem or driver are not used. This allows the buffer to be carried across the next kexec without involvement of the TPM subsystem and ensures a valid buffer pointed to by the of-tree.
Use the subsys_initcall(), rather than an ealier initcall, since page_is_ram() in get_kexec_buffer() only starts working at this stage.
---
v6:
- Define prototype for tpm_add_kexec_buffer under same config options as drivers/of/kexec.c is compiled, provide inline function otherwise. (kernel test robot)
v4:
- Added #include <linux/vmalloc.h> due to parisc
- Use phys_addr_t for physical address rather than void *
- Remove linux,sml-base if the buffer cannot be updated after a kexec
- Added __init to functions where possible
--- drivers/of/kexec.c | 216 +++++++++++++++++++++++++++++++++++++++++- include/linux/kexec.h | 6 ++ include/linux/of.h | 9 +- kernel/kexec_file.c | 6 ++ 4 files changed, 234 insertions(+), 3 deletions(-)
drivers/of/kexec.c +214 -2
@@ -19,6 +19,8 @@#include <linux/random.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/tpm.h> +#include <linux/vmalloc.h> #define RNG_SEED_SIZE 128
@@ -116,7 +118,6 @@ static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,return 0 ; } -#ifdef CONFIG_HAVE_IMA_KEXEC static int __init get_kexec_buffer (const char *name,unsigned long *addr,size_t *size) {
@@ -151,6 +152,7 @@ static int __init get_kexec_buffer(const char *name, unsigned long *addr,return 0 ; } +#ifdef CONFIG_HAVE_IMA_KEXEC /** * ima_get_kexec_buffer - get IMA buffer from the previous kernel * @addr: On successful return, set to point to the buffer contents.
@@ -239,7 +241,6 @@ static void remove_ima_buffer(void *fdt, int chosen_node)remove_buffer (fdt, chosen_node,"linux,ima-kexec-buffer" ); } -#ifdef CONFIG_IMA_KEXEC static int setup_buffer (void *fdt,int chosen_node,const char *name,phys_addr_t addr,size_t size) {
@@ -263,6 +264,7 @@ static int setup_buffer(void *fdt, int chosen_node, const char *name, } +#ifdef CONFIG_IMA_KEXEC /** * setup_ima_buffer - add IMA buffer information to the fdt * @image: kexec image being loaded.
@@ -285,6 +287,213 @@ static inline int setup_ima_buffer(const struct kimage *image, void *fdt, }#endif /* CONFIG_IMA_KEXEC */ +/** +* tpm_get_kexec_buffer - get TPM log buffer from the previous kernel +* @phyaddr: On successful return, set to physical address of buffer +* @size: On successful return, set to the buffer size. +* +* Return: 0 on success, negative errno on error. +*/ +static int __init tpm_get_kexec_buffer (phys_addr_t *phyaddr,size_t *size) +{ +unsigned long tmp_addr; +size_t tmp_size; +int ret; + + ret =get_kexec_buffer ("linux,tpm-kexec-buffer" , &tmp_addr, &tmp_size); +if (ret) +return ret; + + *phyaddr = (phys_addr_t )tmp_addr; + *size = tmp_size; + +return 0 ; +} + +/** +* tpm_of_remove_kexec_buffer - remove the linux,tpm-kexec-buffer node +*/ +static int __init tpm_of_remove_kexec_buffer (void ) +{ +struct property *prop; + + prop =of_find_property (of_chosen,"linux,tpm-kexec-buffer" ,NULL ); +if (!prop) +return -ENOENT ; + +return of_remove_property (of_chosen, prop); +} + +/** +* remove_tpm_buffer - remove the TPM log buffer property and reservation from @fdt +* +* @fdt: Flattened Device Tree to update +* @chosen_node: Offset to the chosen node in the device tree +* +* The TPM log measurement buffer is of no use to a subsequent kernel, so we always +* remove it from the device tree. +*/ +static void remove_tpm_buffer (void *fdt,int chosen_node) +{ +if (!IS_ENABLED (CONFIG_PPC64 )) +return ; + +remove_buffer (fdt, chosen_node,"linux,tpm-kexec-buffer" ); +} + +/** +* setup_tpm_buffer - add TPM measurement log buffer information to the fdt +* @image: kexec image being loaded. +* @fdt: Flattened device tree for the next kernel. +* @chosen_node: Offset to the chosen node. +* +* Return: 0 on success, or negative errno on error. +*/ +static int setup_tpm_buffer (const struct kimage *image,void *fdt, +int chosen_node) +{ +if (!IS_ENABLED (CONFIG_PPC64 )) +return 0 ; + +return setup_buffer (fdt, chosen_node,"linux,tpm-kexec-buffer" , + image->tpm_buffer_addr, image->tpm_buffer_size); +} + +void tpm_add_kexec_buffer (struct kimage *image) +{ +struct kexec_buf kbuf = { .image = image, .buf_align =1 , + .buf_min =0 , .buf_max =ULONG_MAX , + .top_down = true }; +struct device_node *np; +void *buffer; +u32 size; +u64 base; +int ret; + +if (!IS_ENABLED (CONFIG_PPC64 )) +return ; + + np =of_find_node_by_name (NULL ,"vtpm" ); +if (!np) +return ; + +if (of_tpm_get_sml_parameters (np, &base, &size) <0 ) +return ; + + buffer =vmalloc (size); +if (!buffer) +return ; +memcpy (buffer,__va (base), size); + + kbuf.buffer = buffer; + kbuf.bufsz = size; + kbuf.memsz = size; + ret =kexec_add_buffer (&kbuf); +if (ret) { +pr_err ("Error passing over kexec TPM measurement log buffer: %d\n" , + ret); +return ; + } + + image->tpm_buffer = buffer; + image->tpm_buffer_addr = kbuf.mem; + image->tpm_buffer_size = size; +} + +/** +* tpm_post_kexec - Make stored TPM log buffer available in of-tree +*/ +static int __init tpm_post_kexec (void ) +{ +struct property *newprop, *p; +struct device_node *np; +phys_addr_t phyaddr; +u32 oflogsize; +size_t size; +u64 unused; +int ret; + +if (!IS_ENABLED (CONFIG_PPC64 )) +return 0 ; + + np =of_find_node_by_name (NULL ,"vtpm" ); +if (!np) +return 0 ; + +if (!of_get_property (of_chosen,"linux,tpm-kexec-buffer" ,NULL )) { +/* +* linux,tpm-kexec-buffer may be missing on initial boot +* or if previous kernel didn't pass a buffer. +*/ +if (of_get_property (of_chosen,"linux,booted-from-kexec" ,NULL )) { +/* no buffer but kexec'd: remove 'linux,sml-base' */ + ret = -EINVAL ; + goto err_remove_sml_base; + } +return 0 ; + } + +/* +* If any one of the following steps fails we remove linux,sml-base +* to invalidate the TPM log. +*/ + ret =tpm_get_kexec_buffer (&phyaddr, &size); +if (ret) + goto err_remove_kexec_buffer; + +/* logsize must not have changed */ + ret =of_tpm_get_sml_parameters (np, &unused, &oflogsize); +if (ret <0 ) + goto err_free_memblock; + ret = -EINVAL ; +if (oflogsize != size) + goto err_free_memblock; + +/* replace linux,sml-base with new physical address of buffer */ + ret = -ENOMEM ; + newprop =kzalloc (sizeof (*newprop),GFP_KERNEL ); +if (!newprop) + goto err_free_memblock; + + newprop->name =kstrdup ("linux,sml-base" ,GFP_KERNEL ); + newprop->length =sizeof (phyaddr); + newprop->value =kmalloc (sizeof (phyaddr),GFP_KERNEL ); +if (!newprop->name || !newprop->value) + goto err_free_newprop_struct; + +if (of_property_match_string (np,"compatible" ,"IBM,vtpm" ) <0 && +of_property_match_string (np,"compatible" ,"IBM,vtpm20" ) <0 ) { + ret = -ENODEV ; + goto err_free_newprop_struct; + }else { + *(phys_addr_t *)newprop->value = phyaddr; + } + + ret =of_update_property (np, newprop); +if (ret) { +pr_err ("Could not update linux,sml-base with new address" ); + goto err_free_newprop_struct; + } + +return 0 ; + +err_free_newprop_struct: +kfree (newprop->value); +kfree (newprop->name); +kfree (newprop); +err_free_memblock: +memblock_phys_free ((phys_addr_t )phyaddr, size); +err_remove_kexec_buffer: +tpm_of_remove_kexec_buffer (); +err_remove_sml_base: + p =of_find_property (np,"linux,sml-base" ,NULL ); +if (p) +of_remove_property (np, p); + +return ret; +} +subsys_initcall (tpm_post_kexec); +/* * of_kexec_alloc_and_setup_fdt - Alloc and setup a new Flattened Device Tree *
@@ -483,6 +692,9 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,remove_ima_buffer (fdt, chosen_node); ret =setup_ima_buffer (image, fdt,fdt_path_offset (fdt,"/chosen" )); +remove_tpm_buffer (fdt, chosen_node); + ret =setup_tpm_buffer (image, fdt,fdt_path_offset (fdt,"/chosen" )); + out:if (ret) {kvfree (fdt);
include/linux/kexec.h +6 -0
@@ -383,6 +383,12 @@ struct kimage {void *elf_headers;unsigned long elf_headers_sz;unsigned long elf_load_addr; + +/* Virtual address of TPM log buffer for kexec syscall */ +void *tpm_buffer; + +phys_addr_t tpm_buffer_addr; +size_t tpm_buffer_size; };/* kexec interface functions */
include/linux/of.h +8 -1
@@ -100,6 +100,8 @@ struct of_reconfig_data {struct property *old_prop; }; +struct kimage ; +/* initialize a node */ extern struct kobj_type of_node_ktype;extern const struct fwnode_operations of_fwnode_ops;
@@ -436,7 +438,6 @@ int of_map_id(struct device_node *np, u32 id,phys_addr_t of_dma_get_max_cpu_address (struct device_node *np); -struct kimage ; void *of_kexec_alloc_and_setup_fdt(const struct kimage *image, unsigned long initrd_load_addr, unsigned long initrd_len,
@@ -1607,4 +1608,10 @@ static inline int of_overlay_notifier_unregister(struct notifier_block *nb)#endif +#if defined(CONFIG_KEXEC_FILE ) && defined(CONFIG_OF_FLATTREE ) +void tpm_add_kexec_buffer (struct kimage *image); +#else +static inline void tpm_add_kexec_buffer (struct kimage *image) { } +#endif +#endif /* _LINUX_OF_H */
kernel/kexec_file.c +6 -0
@@ -27,6 +27,7 @@#include <linux/kernel_read_file.h> #include <linux/syscalls.h> #include <linux/vmalloc.h> +#include <linux/of.h> #include "kexec_internal.h" #ifdef CONFIG_KEXEC_SIG
@@ -113,6 +114,9 @@ void kimage_file_post_load_cleanup(struct kimage *image) image->ima_buffer =NULL ;#endif /* CONFIG_IMA_KEXEC */ +vfree (image->tpm_buffer); + image->tpm_buffer =NULL ; +/* See if architecture has anything to cleanup post load */ arch_kimage_file_post_load_cleanup (image);
@@ -248,6 +252,8 @@ kimage_file_prepare_segments(struct kimage *image, int kernel_fd, int initrd_fd,/* IMA needs to pass the measurement list to the next kernel. */ ima_add_kexec_buffer (image); +/* Pass the TPM measurement log to next kernel */ +tpm_add_kexec_buffer (image);/* Call arch image load handlers */ ldata =arch_kexec_kernel_image_load (image);
Signature · 7 lines
2.35.1 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Hi Rob,
can you take this series in your tree?
Regards,
Stefan
Quoted 53 lines · Stefan Berger
The of-tree subsystem does not currently preserve the IBM vTPM 1.2 and vTPM 2.0 measurement logs across a kexec on PowerVM and PowerKVM. This series fixes this for the
kexec_file_load()syscall using the flattened device tree (fdt) to carry the TPM measurement log's buffer across kexec.Stefan
v8:
- Added Jarkko's, Coiby's, and Rob's tags
- Rebase on v6.0-rc3 that absorbed 2 already upstreamed patchesv7:
- Added Nageswara's Tested-by tags
- Added back original comment to inline function and removed Jarkko's R-b tagv6:
- Add__inittoget_kexec_bufferas suggested by Jonathan
- Fixed issue detected by kernel test robotv5:
- Rebased on 1 more patch that would otherwise create merge conflictsv4:
- Rebased on 2 patches that would otherwise create merge conflicts; posting these patches in this series with several tags removed so krobot can test the series already
- Changes to individual patches documented in patch descripitonsv3:
- Moved TPM Open Firmware related function todrivers/char/tpm/eventlog/tpm_of.cv2:
- rearranged patches
- fixed compilation issues for x86Palmer Dabbelt (1):
drivers: of: kexec ima: Support 32-bit platformsStefan Berger (3):
tpm: of: Make of-tree specific function commonly available
of: kexec: Refactor IMA buffer related functions to make them reusable tpm/kexec: Duplicate TPM measurement log in of-tree for kexecdrivers/char/tpm/eventlog/of.c | 31 +-- drivers/of/kexec.c | 336 ++++++++++++++++++++++++++++----- include/linux/kexec.h | 6 + include/linux/of.h | 9 +- include/linux/tpm.h | 36 ++++ kernel/kexec_file.c | 6 + 6 files changed, 346 insertions(+), 78 deletions(-)base-commit:
b90cb1053190353cc30f0fef0ef1f378ccc063c5
Quoted 5 lines · Stefan Berger
Hi Rob,
can you take this series in your tree?
IMO, it should be someone that cares about TPM, kexec, or powerpc. Yes, there's code in drivers/of/, but that is purely to avoid duplication of code across powerpc and arm64.
Rob
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 10 lines · Rob Herring
Quoted 5 lines · Stefan Berger
Hi Rob,
can you take this series in your tree?
IMO, it should be someone that cares about TPM, kexec, or powerpc. Yes, there's code in
drivers/of/, but that is purely to avoid duplication of code across powerpc and arm64.
What about 1/4? Can someone else take it into their tree?
Stefan
Quoted 2 lines
Rob
Quoted 9 lines · Stefan Berger
Quoted 5 lines · Rob Herring
Quoted 4 lines · Stefan Berger
Hi Rob,
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
can you take this series in your tree?
IMO, it should be someone that cares about TPM, kexec, or powerpc. Yes, there's code in
drivers/of/, but that is purely to avoid duplication of code across powerpc and arm64.What about 1/4? Can someone else take it into their tree?
I thought that was taken long ago now by Palmer in the riscv tree, but it seems not.
In any case, it has my Ack, so yes, someone else can take it. It *can* go in via 2 different trees (as git won't care), but we generally try to avoid that.
Rob
Quoted 10 lines · Rob Herring
Quoted 5 lines · Stefan Berger
Hi Rob,
can you take this series in your tree?
IMO, it should be someone that cares about TPM, kexec, or powerpc. Yes, there's code in
drivers/of/, but that is purely to avoid duplication of code across powerpc and arm64.
Looks like a PPC specific improvement, is it possible to have TPM on other ARCHes? For generic code patch, Andrew kindly help pick them into his tree if cooked. If it's an arch or component specific code, we usually ask arch or component maintainer to take it.
For this patchset, it should be merged into ppc tree?
Thanks
Baoquan
Hi Michael,
Could the PowerPC tree take this patch set which resolves a PowerVM/KVM-specific issue?
Quoted 56 lines · Stefan Berger
The of-tree subsystem does not currently preserve the IBM vTPM 1.2 and vTPM 2.0 measurement logs across a kexec on PowerVM and PowerKVM. This series fixes this for the
kexec_file_load()syscall using the flattened device tree (fdt) to carry the TPM measurement log's buffer across kexec.Stefan
v8:
- Added Jarkko's, Coiby's, and Rob's tags
- Rebase on v6.0-rc3 that absorbed 2 already upstreamed patchesv7:
- Added Nageswara's Tested-by tags
- Added back original comment to inline function and removed Jarkko's R-b tagv6:
- Add__inittoget_kexec_bufferas suggested by Jonathan
- Fixed issue detected by kernel test robotv5:
- Rebased on 1 more patch that would otherwise create merge conflictsv4:
- Rebased on 2 patches that would otherwise create merge conflicts; posting these patches in this series with several tags removed so krobot can test the series already
- Changes to individual patches documented in patch descripitonsv3:
- Moved TPM Open Firmware related function todrivers/char/tpm/eventlog/tpm_of.cv2:
- rearranged patches
- fixed compilation issues for x86Palmer Dabbelt (1):
drivers: of: kexec ima: Support 32-bit platformsStefan Berger (3):
tpm: of: Make of-tree specific function commonly available
of: kexec: Refactor IMA buffer related functions to make them reusable tpm/kexec: Duplicate TPM measurement log in of-tree for kexecdrivers/char/tpm/eventlog/of.c | 31 +-- drivers/of/kexec.c | 336 ++++++++++++++++++++++++++++----- include/linux/kexec.h | 6 + include/linux/of.h | 9 +- include/linux/tpm.h | 36 ++++ kernel/kexec_file.c | 6 + 6 files changed, 346 insertions(+), 78 deletions(-)base-commit:
b90cb1053190353cc30f0fef0ef1f378ccc063c5Signature · 1 line
2.35.1
Signature · 8 lines
Best regards, Coiby _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Quoted 4 lines · Coiby Xu
Hi Michael,
Could the PowerPC tree take this patch set which resolves a PowerVM/KVM-specific issue?
Michael has (shown me) an alternative approach that protects the already allocated memory to carry it across the kexec. This seems like a good and potentially better alternative, also from the perspective of the changes need, which is a lot less , and it's already used for other stuff as well.
Stefan
Quoted 59 lines · Stefan Berger
Quoted 56 lines
The of-tree subsystem does not currently preserve the IBM vTPM 1.2 and vTPM 2.0 measurement logs across a kexec on PowerVM and PowerKVM. This series fixes this for the
kexec_file_load()syscall using the flattened device tree (fdt) to carry the TPM measurement log's buffer across kexec.Stefan
v8:
- Added Jarkko's, Coiby's, and Rob's tags
- Rebase on v6.0-rc3 that absorbed 2 already upstreamed patchesv7:
- Added Nageswara's Tested-by tags
- Added back original comment to inline function and removed Jarkko's R-b tagv6:
- Add__inittoget_kexec_bufferas suggested by Jonathan
- Fixed issue detected by kernel test robotv5:
- Rebased on 1 more patch that would otherwise create merge conflictsv4:
- Rebased on 2 patches that would otherwise create merge conflicts; posting these patches in this series with several tags removed so krobot can test the series already
- Changes to individual patches documented in patch descripitonsv3:
- Moved TPM Open Firmware related function todrivers/char/tpm/eventlog/tpm_of.cv2:
- rearranged patches
- fixed compilation issues for x86Palmer Dabbelt (1):
drivers: of: kexec ima: Support 32-bit platformsStefan Berger (3):
tpm: of: Make of-tree specific function commonly available
of: kexec: Refactor IMA buffer related functions to make them reusable tpm/kexec: Duplicate TPM measurement log in of-tree for kexec
drivers/char/tpm/eventlog/of.c| 31 +--
drivers/of/kexec.c | 336 ++++++++++++++++++++++++++++----- include/linux/kexec.h | 6 +
include/linux/of.h | 9 +-
include/linux/tpm.h | 36 ++++ kernel/kexec_file.c | 6 +6 files changed, 346 insertions(+), 78 deletions(-)base-commit:
b90cb1053190353cc30f0fef0ef1f378ccc063c5Signature · 1 line
2.35.1