Skip to contentSkip to conversation

address deprecated warnings

PATCH Superseded Mimi Zohar 3 participants 18 messages Sep 2, 2022 – Sep 6, 2022 Keys-trusted

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Mimi Zohar

author maintainer
#0 lore raw

cover address deprecated warnings

Between travis/ci and OpenSSL v3 a large number of deprecated warnings are being emitted when compiling ima-evm-utils. Start addressing these deprecated warnings by replacing the low level SHA1 and HMAC calls with the EVP_ functions. IMA signature version 1 also uses low level calls, but instead of fixing it, deprecate it as nobody should be using it anyway.

OpenSSL v3 "engine" support is deprecated and replaced with "providers". Engine support will continue to work for a while, but results in deprecated declaration and other messages. Define a "--disable-engine" and the equivalent "--enable-engine=no" configuration option.

Changelog:
- Based on Stefan's comments, removed deprecated functions when not used and added missing word. Updated the usage and options accordingly.
- Based on Vitaly's comments, explicitly require "--disable-engine" configuration to compile ima-evm-utils without OpenSSL v3 engine support and typo.
- Based on Petr's comments, addressed the "return 77" by removing it, updated the travis patch description, and added his Reviewed-by tags.

Mimi Zohar (11):
travis: use the distro OpenSSL version on jammy
travis: update dist=focal
Update configure.ac to address a couple of obsolete warnings Deprecate IMA signature version 1
Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs Replace the low level HMAC calls when calculating the EVM HMAC Add missing EVP_MD_CTX_free() call in calc_evm_hash() Deprecate use of OpenSSL v3 "engine" support
Fix potential use after free in read_tpm_banks()
Limit the file hash algorithm name length
Missing template data size lower bounds checking

 .travis.yml               |   4 +-
 acinclude.m4              |   2 +-
 configure.ac              |  23 +++-
 m4/manpage-docbook-xsl.m4 |   2 +-
 src/Makefile.am           |  18 +++
 src/evmctl.c              | 223 +++++++++++++++++++++++++++++---------
 src/imaevm.h              |   2 +
 src/libimaevm.c           |  27 ++++-
 tests/functions.sh        |  14 ++-
 tests/ima_hash.test       |   9 ++
 tests/sign_verify.test    |  28 ++++-
 11 files changed, 280 insertions(+), 72 deletions(-)
Signature · 1 line
2.31.1
author maintainer
#1 lore raw

PATCH 1/11 travis: use the distro OpenSSL version on jammy

Use the distro OpenSSL version on jammy, which is newer than OpenSSL 3-beta.

---
 .travis.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
index 5741116e418a..b18c871be200 100644
@@ -40,7 +40,7 @@ matrix:
           compiler: gcc
 
         - os: linux
-          env: DISTRO=ubuntu:jammy TSS=ibmtss COMPILE_SSL=openssl-3.0.0-beta1
+          env: DISTRO=ubuntu:jammy TSS=ibmtss
           compiler: gcc
 
         - os: linux
Signature · 1 line
2.31.1
author maintainer
#2 lore raw

PATCH 2/11 travis: update dist=focal

In reply to Mimi Zohar

Although Github Actions is available on Github Enterprise Server 3.x single server edition, as well as the unpaid version, it is not available in Github Enterprise Server 3.x cluster edition[1]. Continue to support travis.

[1] https://docs.github.com/en/[email protected]/admin/release-notes#github-packages

---
 .travis.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
index b18c871be200..cc76c0adb312 100644
@@ -1,6 +1,6 @@
 # Copyright (c) 2017-2021 Petr Vorel <[email protected]>
 
-dist: bionic
+dist: focal
 language: C
 services:
     - docker
Signature · 1 line
2.31.1
#3 lore raw

Re: [PATCH ima-evm-utils 02/11] travis: update dist=focal

Quoted 4 lines · Mimi Zohar

Although Github Actions is available on Github Enterprise Server 3.x single server edition, as well as the unpaid version, it is not available in Github Enterprise Server 3.x cluster edition[1]. Continue to support travis.

This text really has nothing obvious to do with the upgrade to focal...

Quoted 21 lines

[1] https://docs.github.com/en/[email protected]/admin/release-notes#github-packages

---
  .travis.yml | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
.travis.yml +1 -1
index b18c871be200..cc76c0adb312 100644
@@ -1,6 +1,6 @@
  # Copyright (c) 2017-2021 Petr Vorel <[email protected]>
 
-dist: bionic
+dist: focal
  language: C
  services:
      - docker
author maintainer
#4 lore raw

Re: [PATCH ima-evm-utils 02/11] travis: update dist=focal

Quoted 8 lines · Stefan Berger
Quoted 4 lines · Mimi Zohar

Although Github Actions is available on Github Enterprise Server 3.x single server edition, as well as the unpaid version, it is not available in Github Enterprise Server 3.x cluster edition[1]. Continue to support travis.

This text really has nothing obvious to do with the upgrade to focal...

True, but I've been asked why we have both github actions and travis. This was a convienent place for providing that explanation.

Mimi

author maintainer
#5 lore raw

PATCH 3/11 Update configure.ac to address a couple of obsolete warnings

In reply to Mimi Zohar

Remove AC_PROG_LIBTOOL and AC_HEAD_STDC. Replace AC_HELP_STRING with AS_HELP_STRING.

---
 acinclude.m4              | 2 +-
 configure.ac              | 4 ----
 m4/manpage-docbook-xsl.m4 | 2 +-
 3 files changed, 2 insertions(+), 6 deletions(-)
acinclude.m4 +1 -1
index dd430d4f0565..bb962f81a9c0 100644
@@ -2,7 +2,7 @@
 AC_DEFUN([PKG_ARG_ENABLE],
 	[
 	AC_MSG_CHECKING(whether to enable $1)
-	AC_ARG_ENABLE([$1], AC_HELP_STRING([--enable-$1], [enable $1 (default is $2)]), 
+	AC_ARG_ENABLE([$1], AS_HELP_STRING([--enable-$1], [enable $1 (default is $2)]),
 	[pkg_cv_enable_$1=$enableval],	
 	[AC_CACHE_VAL([pkg_cv_enable_$1], [pkg_cv_enable_$1=$2])])
 	if test $pkg_cv_enable_$1 = yes; then
configure.ac +0 -4
index 1a0f093df562..9d3b23ff8def 100644
@@ -15,16 +15,12 @@ AM_PROG_CC_C_O
 #AC_PROG_CXX
 #AC_PROG_CPP
 AC_PROG_INSTALL
-AC_PROG_LIBTOOL
 #AC_PROG_LN_S
 LT_INIT
 
 # FIXME: Replace `main' with a function in `-lpthread':
 #AC_CHECK_LIB([pthread], [main])
 
-# Checks for header files.
-AC_HEADER_STDC
-
 PKG_CHECK_MODULES(LIBCRYPTO, [libcrypto >= 0.9.8 ])
 AC_SUBST(KERNEL_HEADERS)
 AC_CHECK_HEADER(unistd.h)
m4/manpage-docbook-xsl.m4 +1 -1
index 25c8ce54b068..f2ee912ed1be 100644
@@ -7,7 +7,7 @@ AC_DEFUN([EVMCTL_MANPAGE_DOCBOOK_XSL], [
 
 	AC_PATH_PROGS(XMLCATALOG, xmlcatalog)
 	AC_ARG_WITH([xml-catalog],
-		AC_HELP_STRING([--with-xml-catalog=CATALOG],
+		AS_HELP_STRING([--with-xml-catalog=CATALOG],
 				[path to xml catalog to use]),,
 				[with_xml_catalog=/etc/xml/catalog])
 	XML_CATALOG_FILE="$with_xml_catalog"
Signature · 1 line
2.31.1
author maintainer
#6 lore raw

PATCH 4/11 Deprecate IMA signature version 1

In reply to Mimi Zohar

The original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.

Define "--enable-sigv1" option to configure signature v1 support.

---
 configure.ac           |  6 ++++++
 src/Makefile.am        | 10 ++++++++++
 src/evmctl.c           | 20 ++++++++++++++++----
 src/libimaevm.c        | 22 +++++++++++++++++++---
 tests/sign_verify.test | 18 ++++++++++++------
 5 files changed, 63 insertions(+), 13 deletions(-)
configure.ac +6 -0
index 9d3b23ff8def..dc666f2bb1fa 100644
@@ -49,6 +49,11 @@ AC_ARG_ENABLE([openssl_conf],
 		AC_DEFINE(DISABLE_OPENSSL_CONF, 1, [Define to disable loading of openssl config by evmctl.])
 	      fi], [enable_openssl_conf=yes])
 
+AC_ARG_ENABLE(sigv1,
+	      AS_HELP_STRING([--enable-sigv1], [Build ima-evm-utils with signature v1 support]))
+	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
+	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
+
 #debug support - yes for a while
 PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
 if test $pkg_cv_enable_debug = yes; then
@@ -83,5 +88,6 @@ echo	"   openssl-conf: $enable_openssl_conf"
 echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
 echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
 echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
+echo    "         sigv1:  $enable_sigv1"
 echo	"            doc: $have_doc"
 echo
src/Makefile.am +10 -0
index 396496bb439d..90c7249020cf 100644
@@ -7,6 +7,10 @@ libimaevm_la_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
 libimaevm_la_LDFLAGS = -version-info 3:0:0
 libimaevm_la_LIBADD =  $(LIBCRYPTO_LIBS)
 
+if CONFIG_SIGV1
+libimaevm_la_CFLAGS = -DCONFIG_SIGV1
+endif
+
 include_HEADERS = imaevm.h
 
 nodist_libimaevm_la_SOURCES = hash_info.h
@@ -22,6 +26,12 @@ evmctl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
 evmctl_LDFLAGS = $(LDFLAGS_READLINE)
 evmctl_LDADD =  $(LIBCRYPTO_LIBS) -lkeyutils libimaevm.la
 
+# Enable IMA signature version 1
+if CONFIG_SIGV1
+evmctl_CFLAGS = -DCONFIG_SIGV1
+endif
+
+
 # USE_PCRTSS uses the Intel TSS
 if USE_PCRTSS
  evmctl_SOURCES += pcr_tss.c
src/evmctl.c +16 -4
index 76e2561798fa..13b0105af8c4 100644
@@ -987,7 +987,6 @@ static int cmd_verify_ima(struct command *cmd)
 			init_public_keys("/etc/keys/x509_evm.der");
 	}
 
-	errno = 0;
 	if (!file) {
 		log_err("Parameters missing\n");
 		print_usage(cmd);
@@ -1004,6 +1003,7 @@ static int cmd_verify_ima(struct command *cmd)
 	return fails > 0;
 }
 
+#if CONFIG_SIGV1
 static int cmd_convert(struct command *cmd)
 {
 	char *inkey;
@@ -1034,6 +1034,7 @@ static int cmd_convert(struct command *cmd)
 	RSA_free(key);
 	return err;
 }
+#endif
 
 static int cmd_import(struct command *cmd)
 {
@@ -1088,6 +1089,7 @@ static int cmd_import(struct command *cmd)
 		calc_keyid_v2((uint32_t *)keyid, name, pkey);
 		EVP_PKEY_free(pkey);
 	} else {
+#if CONFIG_SIGV1
 		RSA *key = read_pub_key(inkey, imaevm_params.x509);
 
 		if (!key)
@@ -1095,6 +1097,10 @@ static int cmd_import(struct command *cmd)
 		len = key2bin(key, pub);
 		calc_keyid_v1(keyid, name, pub, len);
 		RSA_free(key);
+#else
+		log_info("Importing public RSA key is not supported\n");
+		return 1;
+#endif
 	}
 
 	log_info("Importing public key %s from file %s into keyring %d\n", name, inkey, id);
@@ -2598,7 +2604,9 @@ static void usage(void)
 		"  -d, --imahash      make IMA hash\n"
 		"  -f, --sigfile      store IMA signature in .sig file instead of xattr\n"
 		"      --xattr-user   store xattrs in user namespace (for testing purposes)\n"
-		"      --rsa          use RSA key type and signing scheme v1\n"
+#if CONFIG_SIGV1
+		"      --rsa          use RSA key type and signing scheme v1 (deprecated)\n"
+#endif
 		"  -k, --key          path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n"
 		"                     or a pkcs11 URI\n"
 		"      --keyid n      overwrite signature keyid with a 32-bit value in hex (for signing)\n"
@@ -2637,8 +2645,12 @@ static void usage(void)
 struct command cmds[] = {
 	{"--version", NULL, 0, ""},
 	{"help", cmd_help, 0, "<command>"},
-	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring.\n"},
-	{"convert", cmd_convert, 0, "key", "convert public key into the keyring.\n"},
+#if CONFIG_SIGV1
+	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring. ([--rsa] deprecated)\n"},
+	{"convert", cmd_convert, 0, "key", "convert public key into the keyring. (deprecated)\n"},
+#else
+	{"import", cmd_import, 0, "pubkey keyring", "Import public key into the keyring.\n"},
+#endif
 	{"sign", cmd_sign_evm, 0, "[-r] [--imahash | --imasig ] [--key key] [--pass [password] file", "Sign file metadata.\n"},
 	{"verify", cmd_verify_evm, 0, "file", "Verify EVM signature (for debugging).\n"},
 	{"ima_sign", cmd_sign_ima, 0, "[--sigfile] [--key key] [--pass [password] file", "Make file content signature.\n"},
src/libimaevm.c +19 -3
index e4b62b4989b2..4b37bf5bd62c 100644
@@ -292,6 +292,7 @@ out:
 	return pkey;
 }
 
+#if CONFIG_SIGV1
 RSA *read_pub_key(const char *keyfile, int x509)
 {
 	EVP_PKEY *pkey;
@@ -351,6 +352,7 @@ static int verify_hash_v1(const char *file, const unsigned char *hash, int size,
 
 	return 0;
 }
+#endif  /* CONFIG_SIGV1 */
 
 struct public_key_entry {
 	struct public_key_entry *next;
@@ -686,6 +688,7 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
 {
 	/* Get signature type from sig header */
 	if (sig[1] == DIGSIG_VERSION_1) {
+#if CONFIG_SIGV1
 		const char *key = NULL;
 
 		/* Read pubkey from RSA key */
@@ -695,6 +698,10 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
 			key = imaevm_params.keyfile;
 		return verify_hash_v1(file, hash, size, sig + 1, siglen - 1,
 					 key);
+#else
+		log_info("Signature version 1 deprecated.");
+		return -1;
+#endif
 	} else if (sig[1] == DIGSIG_VERSION_2) {
 		return verify_hash_v2(file, hash, size, sig, siglen);
 	} else if (sig[1] == DIGSIG_VERSION_3) {
@@ -742,6 +749,7 @@ int ima_verify_signature(const char *file, unsigned char *sig, int siglen,
 	return verify_hash(file, hash, hashlen, sig, siglen);
 }
 
+#if CONFIG_SIGV1
 /*
  * Create binary key representation suitable for kernel
  */
@@ -800,6 +808,7 @@ void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len
 	if (imaevm_params.verbose > LOG_INFO)
 		log_info("keyid-v1: %s\n", str);
 }
+#endif /* CONFIG_SIGV1 */
 
 /*
  * Calculate keyid of the public_key part of EVP_PKEY
@@ -990,6 +999,7 @@ err_engine:
 	return NULL;
 }
 
+#if CONFIG_SIGV1
 static RSA *read_priv_key(const char *keyfile, const char *keypass)
 {
 	EVP_PKEY *pkey;
@@ -1100,6 +1110,7 @@ out:
 	RSA_free(key);
 	return len;
 }
+#endif /* CONFIG_SIGV1 */
 
 /*
  * @sig is assumed to be of (MAX_SIGNATURE_SIZE - 1) size
@@ -1214,9 +1225,14 @@ int sign_hash(const char *hashalgo, const unsigned char *hash, int size, const c
 	if (keypass)
 		imaevm_params.keypass = keypass;
 
-	return imaevm_params.x509 ?
-		sign_hash_v2(hashalgo, hash, size, keyfile, sig) :
-		sign_hash_v1(hashalgo, hash, size, keyfile, sig);
+	if (imaevm_params.x509)
+		return sign_hash_v2(hashalgo, hash, size, keyfile, sig);
+#if CONFIG_SIGV1
+	else
+		return sign_hash_v1(hashalgo, hash, size, keyfile, sig);
+#endif
+	log_info("Signature version 1 deprecated.");
+	return -1;
 }
 
 static void libinit()
tests/sign_verify.test +12 -6
index c56290aa4932..948892759424 100755
@@ -17,6 +17,7 @@
 
 cd "$(dirname "$0")" || exit 1
 PATH=../src:$PATH
+SIGV1=0
 source ./functions.sh
 
 _require cmp evmctl getfattr openssl xxd
@@ -368,13 +369,18 @@ try_different_sigs() {
 
 ## Test v1 signatures
 # Signature v1 only supports sha1 and sha256 so any other should fail
-expect_fail \
-  check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
+if [ $SIGV1 -eq 0 ]; then
+  __skip() { echo "IMA signature v1 tests are skipped: not supported"; return $SKIP; }
+  expect_pass __skip
+else
+   expect_fail \
+      check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
 
-sign_verify  rsa1024  sha1    0x0301 --rsa
-sign_verify  rsa1024  sha256  0x0301 --rsa
-  try_different_keys
-  try_different_sigs
+   sign_verify  rsa1024  sha1    0x0301 --rsa
+   sign_verify  rsa1024  sha256  0x0301 --rsa
+      try_different_keys
+      try_different_sigs
+fi
 
 ## Test v2 signatures with RSA PKCS#1
 # List of allowed hashes much greater but not all are supported.
Signature · 1 line
2.31.1
Reviewed-by on v1 4/11
#7 lore raw

Re: [PATCH ima-evm-utils 04/11] Deprecate IMA signature version 1

Quoted 8 lines · Mimi Zohar

The original IMA file signatures were based on a SHA1 hash. Kernel support for other hash algorithms was subsequently upstreamed. Deprecate "--rsa" support.

Define "--enable-sigv1" option to configure signature v1 support.

Quoted 258 lines
---
  configure.ac           |  6 ++++++
  src/Makefile.am        | 10 ++++++++++
  src/evmctl.c           | 20 ++++++++++++++++----
  src/libimaevm.c        | 22 +++++++++++++++++++---
  tests/sign_verify.test | 18 ++++++++++++------
  5 files changed, 63 insertions(+), 13 deletions(-)
configure.ac +6 -0
index 9d3b23ff8def..dc666f2bb1fa 100644
@@ -49,6 +49,11 @@ AC_ARG_ENABLE([openssl_conf],
  		AC_DEFINE(DISABLE_OPENSSL_CONF, 1, [Define to disable loading of openssl config by evmctl.])
  	      fi], [enable_openssl_conf=yes])
 
+AC_ARG_ENABLE(sigv1,
+	      AS_HELP_STRING([--enable-sigv1], [Build ima-evm-utils with signature v1 support]))
+	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
+	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
+
  #debug support - yes for a while
  PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
  if test $pkg_cv_enable_debug = yes; then
@@ -83,5 +88,6 @@ echo	"   openssl-conf: $enable_openssl_conf"
  echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
  echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
  echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
+echo    "         sigv1:  $enable_sigv1"
  echo	"            doc: $have_doc"
  echo
src/Makefile.am +10 -0
index 396496bb439d..90c7249020cf 100644
@@ -7,6 +7,10 @@ libimaevm_la_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
  libimaevm_la_LDFLAGS = -version-info 3:0:0
  libimaevm_la_LIBADD =  $(LIBCRYPTO_LIBS)
 
+if CONFIG_SIGV1
+libimaevm_la_CFLAGS = -DCONFIG_SIGV1
+endif
+
  include_HEADERS = imaevm.h
 
  nodist_libimaevm_la_SOURCES = hash_info.h
@@ -22,6 +26,12 @@ evmctl_CPPFLAGS = $(AM_CPPFLAGS) $(LIBCRYPTO_CFLAGS)
  evmctl_LDFLAGS = $(LDFLAGS_READLINE)
  evmctl_LDADD =  $(LIBCRYPTO_LIBS) -lkeyutils libimaevm.la
 
+# Enable IMA signature version 1
+if CONFIG_SIGV1
+evmctl_CFLAGS = -DCONFIG_SIGV1
+endif
+
+
  # USE_PCRTSS uses the Intel TSS
  if USE_PCRTSS
   evmctl_SOURCES += pcr_tss.c
src/evmctl.c +16 -4
index 76e2561798fa..13b0105af8c4 100644
@@ -987,7 +987,6 @@ static int cmd_verify_ima(struct command *cmd)
  			init_public_keys("/etc/keys/x509_evm.der");
  	}
 
-	errno = 0;
  	if (!file) {
  		log_err("Parameters missing\n");
  		print_usage(cmd);
@@ -1004,6 +1003,7 @@ static int cmd_verify_ima(struct command *cmd)
  	return fails > 0;
  }
 
+#if CONFIG_SIGV1
  static int cmd_convert(struct command *cmd)
  {
  	char *inkey;
@@ -1034,6 +1034,7 @@ static int cmd_convert(struct command *cmd)
  	RSA_free(key);
  	return err;
  }
+#endif
 
  static int cmd_import(struct command *cmd)
  {
@@ -1088,6 +1089,7 @@ static int cmd_import(struct command *cmd)
  		calc_keyid_v2((uint32_t *)keyid, name, pkey);
  		EVP_PKEY_free(pkey);
  	} else {
+#if CONFIG_SIGV1
  		RSA *key = read_pub_key(inkey, imaevm_params.x509);
 
  		if (!key)
@@ -1095,6 +1097,10 @@ static int cmd_import(struct command *cmd)
  		len = key2bin(key, pub);
  		calc_keyid_v1(keyid, name, pub, len);
  		RSA_free(key);
+#else
+		log_info("Importing public RSA key is not supported\n");
+		return 1;
+#endif
  	}
 
  	log_info("Importing public key %s from file %s into keyring %d\n", name, inkey, id);
@@ -2598,7 +2604,9 @@ static void usage(void)
  		"  -d, --imahash      make IMA hash\n"
  		"  -f, --sigfile      store IMA signature in .sig file instead of xattr\n"
  		"      --xattr-user   store xattrs in user namespace (for testing purposes)\n"
-		"      --rsa          use RSA key type and signing scheme v1\n"
+#if CONFIG_SIGV1
+		"      --rsa          use RSA key type and signing scheme v1 (deprecated)\n"
+#endif
  		"  -k, --key          path to signing key (default: /etc/keys/{privkey,pubkey}_evm.pem)\n"
  		"                     or a pkcs11 URI\n"
  		"      --keyid n      overwrite signature keyid with a 32-bit value in hex (for signing)\n"
@@ -2637,8 +2645,12 @@ static void usage(void)
  struct command cmds[] = {
  	{"--version", NULL, 0, ""},
  	{"help", cmd_help, 0, "<command>"},
-	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring.\n"},
-	{"convert", cmd_convert, 0, "key", "convert public key into the keyring.\n"},
+#if CONFIG_SIGV1
+	{"import", cmd_import, 0, "[--rsa] pubkey keyring", "Import public key into the keyring. ([--rsa] deprecated)\n"},
+	{"convert", cmd_convert, 0, "key", "convert public key into the keyring. (deprecated)\n"},
+#else
+	{"import", cmd_import, 0, "pubkey keyring", "Import public key into the keyring.\n"},
+#endif
  	{"sign", cmd_sign_evm, 0, "[-r] [--imahash | --imasig ] [--key key] [--pass [password] file", "Sign file metadata.\n"},
  	{"verify", cmd_verify_evm, 0, "file", "Verify EVM signature (for debugging).\n"},
  	{"ima_sign", cmd_sign_ima, 0, "[--sigfile] [--key key] [--pass [password] file", "Make file content signature.\n"},
src/libimaevm.c +19 -3
index e4b62b4989b2..4b37bf5bd62c 100644
@@ -292,6 +292,7 @@ out:
  	return pkey;
  }
 
+#if CONFIG_SIGV1
  RSA *read_pub_key(const char *keyfile, int x509)
  {
  	EVP_PKEY *pkey;
@@ -351,6 +352,7 @@ static int verify_hash_v1(const char *file, const unsigned char *hash, int size,
 
  	return 0;
  }
+#endif  /* CONFIG_SIGV1 */
 
  struct public_key_entry {
  	struct public_key_entry *next;
@@ -686,6 +688,7 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
  {
  	/* Get signature type from sig header */
  	if (sig[1] == DIGSIG_VERSION_1) {
+#if CONFIG_SIGV1
  		const char *key = NULL;
 
  		/* Read pubkey from RSA key */
@@ -695,6 +698,10 @@ int verify_hash(const char *file, const unsigned char *hash, int size,
  			key = imaevm_params.keyfile;
  		return verify_hash_v1(file, hash, size, sig + 1, siglen - 1,
  					 key);
+#else
+		log_info("Signature version 1 deprecated.");
+		return -1;
+#endif
  	} else if (sig[1] == DIGSIG_VERSION_2) {
  		return verify_hash_v2(file, hash, size, sig, siglen);
  	} else if (sig[1] == DIGSIG_VERSION_3) {
@@ -742,6 +749,7 @@ int ima_verify_signature(const char *file, unsigned char *sig, int siglen,
  	return verify_hash(file, hash, hashlen, sig, siglen);
  }
 
+#if CONFIG_SIGV1
  /*
   * Create binary key representation suitable for kernel
   */
@@ -800,6 +808,7 @@ void calc_keyid_v1(uint8_t *keyid, char *str, const unsigned char *pkey, int len
  	if (imaevm_params.verbose > LOG_INFO)
  		log_info("keyid-v1: %s\n", str);
  }
+#endif /* CONFIG_SIGV1 */
 
  /*
   * Calculate keyid of the public_key part of EVP_PKEY
@@ -990,6 +999,7 @@ err_engine:
  	return NULL;
  }
 
+#if CONFIG_SIGV1
  static RSA *read_priv_key(const char *keyfile, const char *keypass)
  {
  	EVP_PKEY *pkey;
@@ -1100,6 +1110,7 @@ out:
  	RSA_free(key);
  	return len;
  }
+#endif /* CONFIG_SIGV1 */
 
  /*
   * @sig is assumed to be of (MAX_SIGNATURE_SIZE - 1) size
@@ -1214,9 +1225,14 @@ int sign_hash(const char *hashalgo, const unsigned char *hash, int size, const c
  	if (keypass)
  		imaevm_params.keypass = keypass;
 
-	return imaevm_params.x509 ?
-		sign_hash_v2(hashalgo, hash, size, keyfile, sig) :
-		sign_hash_v1(hashalgo, hash, size, keyfile, sig);
+	if (imaevm_params.x509)
+		return sign_hash_v2(hashalgo, hash, size, keyfile, sig);
+#if CONFIG_SIGV1
+	else
+		return sign_hash_v1(hashalgo, hash, size, keyfile, sig);
+#endif
+	log_info("Signature version 1 deprecated.");
+	return -1;
  }
 
  static void libinit()
tests/sign_verify.test +12 -6
index c56290aa4932..948892759424 100755
@@ -17,6 +17,7 @@
 
  cd "$(dirname "$0")" || exit 1
  PATH=../src:$PATH
+SIGV1=0
  source ./functions.sh
 
  _require cmp evmctl getfattr openssl xxd
@@ -368,13 +369,18 @@ try_different_sigs() {
 
  ## Test v1 signatures
  # Signature v1 only supports sha1 and sha256 so any other should fail
-expect_fail \
-  check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
+if [ $SIGV1 -eq 0 ]; then
+  __skip() { echo "IMA signature v1 tests are skipped: not supported"; return $SKIP; }
+  expect_pass __skip
+else
+   expect_fail \
+      check_sign TYPE=ima KEY=rsa1024 ALG=md5 PREFIX=0x0301 OPTS=--rsa
 
-sign_verify  rsa1024  sha1    0x0301 --rsa
-sign_verify  rsa1024  sha256  0x0301 --rsa
-  try_different_keys
-  try_different_sigs
+   sign_verify  rsa1024  sha1    0x0301 --rsa
+   sign_verify  rsa1024  sha256  0x0301 --rsa
+      try_different_keys
+      try_different_sigs
+fi
 
  ## Test v2 signatures with RSA PKCS#1
  # List of allowed hashes much greater but not all are supported.
author maintainer
#8 lore raw

PATCH 5/11 Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs

In reply to Mimi Zohar

OpenSSL v3 emits deprecated warnings for SHA1 functions. Use the EVP_ functions when walking the TPM 1.2 binary bios measurements to calculate the TPM 1.2 PCRs.

---
 src/evmctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 59 insertions(+), 6 deletions(-)
src/evmctl.c +59 -6
index 13b0105af8c4..641504047a36 100644
@@ -2295,6 +2295,11 @@ static int cmd_ima_measurement(struct command *cmd)
 	return ima_measurement(file);
 }
 
+/*
+ * read_binary_bios_measurements - read the TPM 1.2 event log
+ *
+ * Returns 0 on success, 1 on failure.
+ */
 #define MAX_EVENT_DATA_SIZE 200000
 static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 {
@@ -2307,12 +2312,19 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 		} header;
 		unsigned char data[MAX_EVENT_DATA_SIZE];
 	} event;
+	EVP_MD_CTX *mdctx;
+	const EVP_MD *md;
+	unsigned int mdlen;
+	int evp_err = 1;	/* success */
 	struct stat s;
 	FILE *fp;
-	SHA_CTX c;
 	int err = 0;
 	int len;
 	int i;
+#if OPENSSL_VERSION_NUMBER < 0x10100000
+	EVP_MD_CTX ctx;
+	mdctx = &ctx;
+#endif
 
 	if (stat(file, &s) == -1) {
 		errno = 0;
@@ -2334,6 +2346,23 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 	if (imaevm_params.verbose > LOG_INFO)
 		log_info("Reading the TPM 1.2 event log %s.\n", file);
 
+	md = EVP_get_digestbyname(bank->algo_name);
+	if (!md) {
+		log_errno("Unknown message digest %s\n", bank->algo_name);
+		errno = 0;
+		fclose(fp);
+		return 1;
+	}
+
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	mdctx = EVP_MD_CTX_new();
+	if (!mdctx) {
+		log_err("EVP_MD_CTX_new failed\n");
+		fclose(fp);
+		return 1;
+	}
+#endif
+
 	/* Extend the pseudo TPM PCRs with the event digest */
 	while (fread(&event, sizeof(event.header), 1, fp) == 1) {
 		if (imaevm_params.verbose > LOG_INFO) {
@@ -2342,13 +2371,30 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 		}
 		if (event.header.pcr >= NUM_PCRS) {
 			log_err("Invalid PCR %d.\n", event.header.pcr);
-			err = 1;
 			break;
 		}
-		SHA1_Init(&c);
-		SHA1_Update(&c, bank->pcr[event.header.pcr], 20);
-		SHA1_Update(&c, event.header.digest, 20);
-		SHA1_Final(bank->pcr[event.header.pcr], &c);
+
+		evp_err = EVP_DigestInit(mdctx, md);
+		if (evp_err == 0) {
+			log_err("EVP_DigestInit() failed\n");
+			break;
+		}
+
+		evp_err = EVP_DigestUpdate(mdctx, bank->pcr[event.header.pcr], 20);
+		if (evp_err == 0) {
+			log_err("EVP_DigestUpdate() failed\n");
+			break;
+		}
+		evp_err = EVP_DigestUpdate(mdctx, event.header.digest, 20);
+		if (evp_err == 0) {
+			log_err("EVP_DigestUpdate() failed\n");
+			break;
+		}
+		evp_err = EVP_DigestFinal(mdctx, bank->pcr[event.header.pcr], &mdlen);
+		if (evp_err == 0) {
+			log_err("EVP_DigestFinal() failed\n");
+			break;
+		}
 		if (event.header.len > MAX_EVENT_DATA_SIZE) {
 			log_err("Event data event too long.\n");
 			err = 1;
@@ -2357,10 +2403,17 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
 		len = fread(event.data, event.header.len, 1, fp);
 		if (len != 1) {
 			log_errno("Failed reading event data (short read)\n");
+			err = 1;
 			break;
 		}
 	}
+
+	if (evp_err == 0) /* EVP_ functions return 1 on success, 0 on failure */
+		err = 1;
 	fclose(fp);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(mdctx);
+#endif
 
 	if (imaevm_params.verbose <= LOG_INFO)
 		return err;
Signature · 1 line
2.31.1
Reviewed-by on v1 5/11
#9 lore raw

Re: [PATCH ima-evm-utils 05/11] Replace the low level SHA1 calls when calculating the TPM 1.2 PCRs

Quoted 115 lines · Mimi Zohar

OpenSSL v3 emits deprecated warnings for SHA1 functions. Use the EVP_ functions when walking the TPM 1.2 binary bios measurements to calculate the TPM 1.2 PCRs.

---
  src/evmctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++-----
  1 file changed, 59 insertions(+), 6 deletions(-)
src/evmctl.c +53 -6
index 13b0105af8c4..641504047a36 100644
@@ -2295,6 +2295,11 @@ static int cmd_ima_measurement(struct command *cmd)
  	return ima_measurement(file);
  }
 
+/*
+ * read_binary_bios_measurements - read the TPM 1.2 event log
+ *
+ * Returns 0 on success, 1 on failure.
+ */
  #define MAX_EVENT_DATA_SIZE 200000
  static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
  {
@@ -2307,12 +2312,19 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
  		} header;
  		unsigned char data[MAX_EVENT_DATA_SIZE];
  	} event;
+	EVP_MD_CTX *mdctx;
+	const EVP_MD *md;
+	unsigned int mdlen;
+	int evp_err = 1;	/* success */
  	struct stat s;
  	FILE *fp;
-	SHA_CTX c;
  	int err = 0;
  	int len;
  	int i;
+#if OPENSSL_VERSION_NUMBER < 0x10100000
+	EVP_MD_CTX ctx;
+	mdctx = &ctx;
+#endif
 
  	if (stat(file, &s) == -1) {
  		errno = 0;
@@ -2334,6 +2346,23 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
  	if (imaevm_params.verbose > LOG_INFO)
  		log_info("Reading the TPM 1.2 event log %s.\n", file);
 
+	md = EVP_get_digestbyname(bank->algo_name);
+	if (!md) {
+		log_errno("Unknown message digest %s\n", bank->algo_name);
+		errno = 0;
+		fclose(fp);
+		return 1;
+	}
+
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	mdctx = EVP_MD_CTX_new();
+	if (!mdctx) {
+		log_err("EVP_MD_CTX_new failed\n");
+		fclose(fp);
+		return 1;
+	}
+#endif
+
  	/* Extend the pseudo TPM PCRs with the event digest */
  	while (fread(&event, sizeof(event.header), 1, fp) == 1) {
  		if (imaevm_params.verbose > LOG_INFO) {
@@ -2342,13 +2371,30 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
  		}
  		if (event.header.pcr >= NUM_PCRS) {
  			log_err("Invalid PCR %d.\n", event.header.pcr);
-			err = 1;
  			break;
  		}
-		SHA1_Init(&c);
-		SHA1_Update(&c, bank->pcr[event.header.pcr], 20);
-		SHA1_Update(&c, event.header.digest, 20);
-		SHA1_Final(bank->pcr[event.header.pcr], &c);
+
+		evp_err = EVP_DigestInit(mdctx, md);
+		if (evp_err == 0) {
+			log_err("EVP_DigestInit() failed\n");
+			break;
+		}
+
+		evp_err = EVP_DigestUpdate(mdctx, bank->pcr[event.header.pcr], 20);
+		if (evp_err == 0) {
+			log_err("EVP_DigestUpdate() failed\n");
+			break;
+		}
+		evp_err = EVP_DigestUpdate(mdctx, event.header.digest, 20);
+		if (evp_err == 0) {
+			log_err("EVP_DigestUpdate() failed\n");
+			break;
+		}
+		evp_err = EVP_DigestFinal(mdctx, bank->pcr[event.header.pcr], &mdlen);
+		if (evp_err == 0) {
+			log_err("EVP_DigestFinal() failed\n");
+			break;
+		}
  		if (event.header.len > MAX_EVENT_DATA_SIZE) {
  			log_err("Event data event too long.\n");
  			err = 1;
@@ -2357,10 +2403,17 @@ static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank)
  		len = fread(event.data, event.header.len, 1, fp);
  		if (len != 1) {
  			log_errno("Failed reading event data (short read)\n");
+			err = 1;
  			break;
  		}
  	}

src/evmctl.c static int read_binary_bios_measurements(char *file, struct tpm_bank_info *bank) · line 2419

Quoted 10 lines
src/evmctl.c +6 -0
+
+	if (evp_err == 0) /* EVP_ functions return 1 on success, 0 on failure */
+		err = 1;
  	fclose(fp);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(mdctx);
+#endif
 
  	if (imaevm_params.verbose <= LOG_INFO)
  		return err;
author maintainer
#10 lore raw

PATCH 6/11 Replace the low level HMAC calls when calculating the EVM HMAC

In reply to Mimi Zohar

Calculating the EVM HMAC and labeling the filesystem was originally included in ima-evm-utils for debugging purposes only. For now, instead of removing EVM HMAC support just replace the low level HMAC_ calls with EVP_ calls.

The '-a, --hashalgo' specifies the IMA hash or signature algorithm. The kernel EVM HMAC is limited to SHA1. Fix ima-evm-utils by hard coding the EVM HMAC algorithm to SHA1.

---
 src/evmctl.c | 57 +++++++++++++++++++++++++++++-----------------------
 1 file changed, 32 insertions(+), 25 deletions(-)
src/evmctl.c +32 -25
index 641504047a36..a9b2f1040787 100644
@@ -1159,12 +1159,12 @@ static int cmd_setxattr_ima(struct command *cmd)
 
 static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *hash)
 {
-        const EVP_MD *md;
+	size_t mdlen;
+	EVP_MD_CTX *pctx;
+	EVP_PKEY *pkey = NULL;
 	struct stat st;
 	int err = -1;
 	uint32_t generation = 0;
-	HMAC_CTX *pctx;
-	unsigned int mdlen;
 	char **xattrname;
 	unsigned char xattr_value[1024];
 	unsigned char *key;
@@ -1175,10 +1175,8 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 	struct h_misc_64 hmac_misc;
 	int hmac_size;
 #if OPENSSL_VERSION_NUMBER < 0x10100000
-	HMAC_CTX ctx;
+	EVP_MD_CTX ctx;
 	pctx = &ctx;
-#else
-	pctx = HMAC_CTX_new();
 #endif
 
 	key = file2bin(keyfile, NULL, &keylen);
@@ -1226,19 +1224,26 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 		goto out;
 	}
 
-	md = EVP_get_digestbyname(imaevm_params.hash_algo);
-	if (!md) {
-		log_err("EVP_get_digestbyname(%s) failed\n",
-			imaevm_params.hash_algo);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	pctx = EVP_MD_CTX_new();
+	if (!pctx) {
+		log_err("EVP_MD_CTX_new failed\n");
 		goto out;
 	}
+#endif
 
-	err = !HMAC_Init_ex(pctx, evmkey, sizeof(evmkey), md, NULL);
-	if (err) {
+	pkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, NULL, evmkey, sizeof(evmkey));
+	if (!pkey) {
 		log_err("HMAC_Init() failed\n");
 		goto out;
 	}
 
+	err = EVP_DigestSignInit(pctx, NULL, EVP_sha1(), NULL, pkey);
+	if (err != 1) {
+		log_err("EVP_DigestSignInit() failed\n");
+		goto out;
+	}
+
 	for (xattrname = evm_config_xattrnames; *xattrname != NULL; xattrname++) {
 		err = lgetxattr(file, *xattrname, xattr_value, sizeof(xattr_value));
 		if (err < 0) {
@@ -1249,12 +1254,12 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 			log_info("skipping xattr: %s\n", *xattrname);
 			continue;
 		}
-		/*log_debug("name: %s, value: %s, size: %d\n", *xattrname, xattr_value, err);*/
 		log_info("name: %s, size: %d\n", *xattrname, err);
 		log_debug_dump(xattr_value, err);
-		err = !HMAC_Update(pctx, xattr_value, err);
-		if (err) {
-			log_err("HMAC_Update() failed\n");
+
+		err = EVP_DigestSignUpdate(pctx, xattr_value, err);
+		if (err != 1) {
+			log_err("EVP_DigestSignUpdate() failed\n");
 			goto out_ctx_cleanup;
 		}
 	}
@@ -1293,23 +1298,24 @@ static int calc_evm_hmac(const char *file, const char *keyfile, unsigned char *h
 	log_debug("hmac_misc (%d): ", hmac_size);
 	log_debug_dump(&hmac_misc, hmac_size);
 
-	err = !HMAC_Update(pctx, (const unsigned char *)&hmac_misc, hmac_size);
-	if (err) {
+	err = EVP_DigestSignUpdate(pctx, &hmac_misc, hmac_size);
+	if (err != 1) {
 		log_err("HMAC_Update() failed\n");
 		goto out_ctx_cleanup;
 	}
-	err = !HMAC_Final(pctx, hash, &mdlen);
-	if (err)
+	err = EVP_DigestSignFinal(pctx, hash, &mdlen);
+	if (err != 1)
 		log_err("HMAC_Final() failed\n");
 out_ctx_cleanup:
-#if OPENSSL_VERSION_NUMBER < 0x10100000
-	HMAC_CTX_cleanup(pctx);
-#else
-	HMAC_CTX_free(pctx);
+	EVP_PKEY_free(pkey);
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(pctx);
 #endif
 out:
 	free(key);
-	return err ?: mdlen;
+	if (err == 1)
+		return mdlen;
+	return err;
 }
 
 static int hmac_evm(const char *file, const char *key)
@@ -1333,6 +1339,7 @@ static int hmac_evm(const char *file, const char *key)
 		err = lsetxattr(file, xattr_evm, sig, len + 1, 0);
 		if (err < 0) {
 			log_err("setxattr failed: %s\n", file);
+			errno = 0;
 			return err;
 		}
 	}
Signature · 1 line
2.31.1
author maintainer
#11 lore raw

PATCH 7/11 Add missing EVP_MD_CTX_free() call in calc_evm_hash()

In reply to Mimi Zohar

When EVP_MD_CTX_new() call was added, the corresponding EVP_MD_CTX_free() was never called. Properly free it.

Fixes 81010f0d87ef ("ima-evm-utils: Add backward compatible support for openssl 1.1")
---
 src/evmctl.c | 57 ++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 40 insertions(+), 17 deletions(-)
src/evmctl.c +40 -17
index a9b2f1040787..b89e74e06c3d 100644
@@ -331,11 +331,17 @@ err:
 	return -1;
 }
 
+/*
+ * calc_evm_hash - calculate the file metadata hash
+ *
+ * Returns 0 for EVP_ function failures. Return -1 for other failures.
+ * Return hash algorithm size on success.
+ */
 static int calc_evm_hash(const char *file, unsigned char *hash)
 {
         const EVP_MD *md;
 	struct stat st;
-	int err;
+	int err = -1;
 	uint32_t generation = 0;
 	EVP_MD_CTX *pctx;
 	unsigned int mdlen;
@@ -349,12 +355,11 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 #if OPENSSL_VERSION_NUMBER < 0x10100000
 	EVP_MD_CTX ctx;
 	pctx = &ctx;
-#else
-	pctx = EVP_MD_CTX_new();
 #endif
 
 	if (lstat(file, &st)) {
 		log_err("Failed to stat: %s\n", file);
+		errno = 0;
 		return -1;
 	}
 
@@ -391,20 +396,30 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 	list_size = llistxattr(file, list, sizeof(list));
 	if (list_size < 0) {
 		log_err("llistxattr() failed\n");
+		errno = 0;
 		return -1;
 	}
 
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	pctx = EVP_MD_CTX_new();
+	if (!pctx) {
+		log_err("EVP_MD_CTX_new() failed\n");
+		return 0;
+	}
+#endif
+
 	md = EVP_get_digestbyname(imaevm_params.hash_algo);
 	if (!md) {
 		log_err("EVP_get_digestbyname(%s) failed\n",
 			imaevm_params.hash_algo);
-		return 1;
+		err = 0;
+		goto out;
 	}
 
 	err = EVP_DigestInit(pctx, md);
 	if (!err) {
 		log_err("EVP_DigestInit() failed\n");
-		return 1;
+		goto out;
 	}
 
 	for (xattrname = evm_config_xattrnames; *xattrname != NULL; xattrname++) {
@@ -415,7 +430,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err > sizeof(xattr_value)) {
 				log_err("selinux[%u] value is too long to fit into xattr[%zu]\n",
 					err, sizeof(xattr_value));
-				return -1;
+				err = -1;
+				goto out;
 			}
 			strcpy(xattr_value, selinux_str);
 		} else if (!strcmp(*xattrname, XATTR_NAME_IMA) && ima_str) {
@@ -423,7 +439,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err > sizeof(xattr_value)) {
 				log_err("ima[%u] value is too long to fit into xattr[%zu]\n",
 					err, sizeof(xattr_value));
-				return -1;
+				err = -1;
+				goto out;
 			}
 			hex2bin(xattr_value, ima_str, err);
 		} else if (!strcmp(*xattrname, XATTR_NAME_IMA) && evm_portable){
@@ -432,7 +449,7 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err < 0) {
 				log_err("EVM portable sig: %s required\n",
 					xattr_ima);
-				return -1;
+				goto out;
 			}
 			use_xattr_ima = 1;
 		} else if (!strcmp(*xattrname, XATTR_NAME_CAPS) && (hmac_flags & HMAC_FLAG_CAPS_SET)) {
@@ -442,7 +459,8 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 			if (err >= sizeof(xattr_value)) {
 				log_err("caps[%u] value is too long to fit into xattr[%zu]\n",
 					err + 1, sizeof(xattr_value));
-				return -1;
+				err = -1;
+				goto out;
 			}
 			strcpy(xattr_value, caps_str);
 		} else {
@@ -463,7 +481,7 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 		err = EVP_DigestUpdate(pctx, xattr_value, err);
 		if (!err) {
 			log_err("EVP_DigestUpdate() failed\n");
-			return 1;
+			goto out;
 		}
 	}
 
@@ -517,29 +535,33 @@ static int calc_evm_hash(const char *file, unsigned char *hash)
 	err = EVP_DigestUpdate(pctx, &hmac_misc, hmac_size);
 	if (!err) {
 		log_err("EVP_DigestUpdate() failed\n");
-		return 1;
+		goto out;
 	}
 
 	if (!evm_immutable && !evm_portable &&
 	    !(hmac_flags & HMAC_FLAG_NO_UUID)) {
 		err = get_uuid(&st, uuid);
 		if (err)
-			return -1;
+			goto out;
 
 		err = EVP_DigestUpdate(pctx, (const unsigned char *)uuid, sizeof(uuid));
 		if (!err) {
 			log_err("EVP_DigestUpdate() failed\n");
-			return 1;
+			goto out;
 		}
 	}
 
 	err = EVP_DigestFinal(pctx, hash, &mdlen);
-	if (!err) {
+	if (!err)
 		log_err("EVP_DigestFinal() failed\n");
-		return 1;
-	}
 
-	return mdlen;
+out:
+#if OPENSSL_VERSION_NUMBER >= 0x10100000
+	EVP_MD_CTX_free(pctx);
+#endif
+	if (err == 1)
+		return mdlen;
+	return err;
 }
 
 static int sign_evm(const char *file, const char *key)
@@ -575,6 +597,7 @@ static int sign_evm(const char *file, const char *key)
 		err = lsetxattr(file, xattr_evm, sig, len, 0);
 		if (err < 0) {
 			log_err("setxattr failed: %s\n", file);
+			errno = 0;
 			return err;
 		}
 	}
Signature · 1 line
2.31.1
author maintainer
#12 lore raw

PATCH 8/11 Deprecate use of OpenSSL v3 "engine" support

In reply to Mimi Zohar

OpenSSL v3 "engine" support is deprecated and replaced with "providers". Engine support will continue to work for a while, but results in deprecated declaration and other messages. One option is simply to hide them ("-Wno-deprecated-declarations"). The other alternative is to conditionally build ima-evm-utils without OpenSSL v3 engine support and without disabling deprecated declarations.

Based on "--disable-engine" or "--enable-engine=no" configuration option, disable OpenSSL v3 "engine" support.

When ima-evm-utils engine support is disabled, don't execute the tests requiring it.

---
 configure.ac           | 13 +++++++++++++
 src/Makefile.am        |  8 ++++++++
 src/evmctl.c           | 17 ++++++++++++++++-
 src/imaevm.h           |  2 ++
 src/libimaevm.c        |  5 +++++
 tests/functions.sh     | 14 +++++++++++++-
 tests/ima_hash.test    |  9 +++++++++
 tests/sign_verify.test | 10 ++++++++++
 8 files changed, 76 insertions(+), 2 deletions(-)
configure.ac +13 -0
index dc666f2bb1fa..1a7d7eb17370 100644
@@ -54,6 +54,17 @@ AC_ARG_ENABLE(sigv1,
 	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
 	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
 
+AC_ARG_ENABLE(engine,
+	      [AS_HELP_STRING([--disable-engine], [build ima-evm-utils without OpenSSL v3 engine support])])
+
+ssl_version=$(openssl version | sed -e 's/^OpenSSL //' | sed -e 's/ .*//')
+if test "${ssl_version::1}" != "3"; then
+	enable_engine="yes"
+elif test -z "$enable_engine"; then
+	enable_engine="yes"
+fi
+AM_CONDITIONAL([CONFIG_ENGINE], [test "x$enable_engine" = "xyes"])
+
 #debug support - yes for a while
 PKG_ARG_ENABLE(debug, "yes", DEBUG, [Enable Debug support])
 if test $pkg_cv_enable_debug = yes; then
@@ -89,5 +100,7 @@ echo	"      tss2-esys: $ac_cv_lib_tss2_esys_Esys_Free"
 echo	" tss2-rc-decode: $ac_cv_lib_tss2_rc_Tss2_RC_Decode"
 echo    "         ibmtss: $ac_cv_header_ibmtss_tss_h"
 echo    "         sigv1:  $enable_sigv1"
+echo    "         engine: $enable_engine"
+echo    "            ssl: $ssl_version"
 echo	"            doc: $have_doc"
 echo
src/Makefile.am +8 -0
index 90c7249020cf..a810d6e0acff 100644
@@ -11,6 +11,10 @@ if CONFIG_SIGV1
 libimaevm_la_CFLAGS = -DCONFIG_SIGV1
 endif
 
+if CONFIG_ENGINE
+libimaevm_la_CFLAGS = -DCONFIG_ENGINE
+endif
+
 include_HEADERS = imaevm.h
 
 nodist_libimaevm_la_SOURCES = hash_info.h
@@ -31,6 +35,10 @@ if CONFIG_SIGV1
 evmctl_CFLAGS = -DCONFIG_SIGV1
 endif
 
+# Enable "--engine" support
+if CONFIG_ENGINE
+evmctl_CFLAGS = -DCONFIG_ENGINE
+endif
 
 # USE_PCRTSS uses the Intel TSS
 if USE_PCRTSS
src/evmctl.c +16 -1
index b89e74e06c3d..fa588e0caba2 100644
@@ -64,7 +64,9 @@
 #include <openssl/hmac.h>
 #include <openssl/err.h>
 #include <openssl/rsa.h>
+#if CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/x509v3.h>
 #include "hash_info.h"
 #include "pcr.h"
@@ -2715,7 +2717,9 @@ static void usage(void)
 		"      --selinux      use custom Selinux label for EVM\n"
 		"      --caps         use custom Capabilities for EVM(unspecified: from FS, empty: do not use)\n"
 		"      --verify-sig   verify measurement list signatures\n"
-		"      --engine e     preload OpenSSL engine e (such as: gost)\n"
+#if CONFIG_ENGINE
+		"      --engine e     preload OpenSSL engine e (such as: gost) is deprecated\n"
+#endif
 		"      --ignore-violations ignore ToMToU measurement violations\n"
 		"  -v                 increase verbosity level\n"
 		"  -h, --help         display this help and exit\n"
@@ -2777,7 +2781,9 @@ static struct option opts[] = {
 	{"selinux", 1, 0, 136},
 	{"caps", 2, 0, 137},
 	{"verify-sig", 0, 0, 138},
+#if CONFIG_ENGINE
 	{"engine", 1, 0, 139},
+#endif
 	{"xattr-user", 0, 0, 140},
 	{"ignore-violations", 0, 0, 141},
 	{"pcrs", 1, 0, 142},
@@ -2830,9 +2836,11 @@ static char *get_password(void)
 	return password;
 }
 
+#if CONFIG_ENGINE
 static ENGINE *setup_engine(const char *engine_id)
 {
 	ENGINE *eng = ENGINE_by_id(engine_id);
+
 	if (!eng) {
 		log_err("engine %s isn't available\n", optarg);
 		ERR_print_errors_fp(stderr);
@@ -2846,6 +2854,7 @@ static ENGINE *setup_engine(const char *engine_id)
 		ENGINE_set_default(eng, ENGINE_METHOD_ALL);
 	return eng;
 }
+#endif
 
 int main(int argc, char *argv[])
 {
@@ -2971,11 +2980,13 @@ int main(int argc, char *argv[])
 		case 138:
 			verify_list_sig = 1;
 			break;
+#if CONFIG_ENGINE
 		case 139: /* --engine e */
 			imaevm_params.eng = setup_engine(optarg);
 			if (!imaevm_params.eng)
 				goto error;
 			break;
+#endif
 		case 140: /* --xattr-user */
 			xattr_ima = "user.ima";
 			xattr_evm = "user.evm";
@@ -3034,7 +3045,9 @@ int main(int argc, char *argv[])
 	if (imaevm_params.keyfile != NULL &&
 	    imaevm_params.eng == NULL &&
 	    !strncmp(imaevm_params.keyfile, "pkcs11:", 7)) {
+#if CONFIG_ENGINE
 		imaevm_params.eng = setup_engine("pkcs11");
+#endif
 		if (!imaevm_params.eng)
 			goto error;
 	}
@@ -3060,6 +3073,7 @@ int main(int argc, char *argv[])
 	}
 
 error:
+#if CONFIG_ENGINE
 	if (imaevm_params.eng) {
 		ENGINE_finish(imaevm_params.eng);
 		ENGINE_free(imaevm_params.eng);
@@ -3067,6 +3081,7 @@ error:
 		ENGINE_cleanup();
 #endif
 	}
+#endif
 	ERR_free_strings();
 	EVP_cleanup();
 	BIO_free(NULL);
src/imaevm.h +2 -0
index afcf1e042014..ebe8c20d566a 100644
@@ -48,7 +48,9 @@
 #include <errno.h>
 #include <sys/types.h>
 #include <openssl/rsa.h>
+#ifdef CONFIG_ENGINE
 #include <openssl/engine.h>
+#endif
 
 #ifdef USE_FPRINTF
 #define do_log(level, fmt, args...)	\
src/libimaevm.c +5 -0
index 4b37bf5bd62c..ba489402f6f1 100644
@@ -959,6 +959,7 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 	EVP_PKEY *pkey;
 
 	if (!strncmp(keyfile, "pkcs11:", 7)) {
+#ifdef CONFIG_ENGINE
 		if (!imaevm_params.keyid) {
 			log_err("When using a pkcs11 URI you must provide the keyid with an option\n");
 			return NULL;
@@ -975,6 +976,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 			log_err("Failed to load private key %s\n", keyfile);
 			goto err_engine;
 		}
+#else
+		log_err("OpenSSL 3 \"engine\" support is deprecated\n");
+		goto err_engine;
+#endif
 	} else {
 		fp = fopen(keyfile, "r");
 		if (!fp) {
tests/functions.sh +13 -1
index 8f6f02dfcd95..19c1725d5b32 100755
@@ -312,4 +312,16 @@ _softhsm_teardown() {
   rm -rf "${SOFTHSM_SETUP_CONFIGDIR}"
   unset SOFTHSM_SETUP_CONFIGDIR SOFTHSM2_CONF PKCS11_KEYURI \
     EVMCTL_ENGINE OPENSSL_ENGINE OPENSSL_KEYFORM
-}
\ No newline at end of file
+}
+
+# OpenSSL 3 engine support still works, but is deprecated. In preparation
+# for it being removed, a new ima-evm-utils configuration option
+# "--disable-engine" and the equivalent "--enable-engine=no" is defined.`
+_is_engine_supported() {
+  cmd="evmctl --engine pkcs11"
+  $cmd &>/dev/null
+  if [ $? -eq 1 ]; then
+     return 0
+  fi
+  return 1
+}
tests/ima_hash.test +9 -0
index e88fd59cc359..33223e6c7a94 100755
@@ -71,6 +71,15 @@ expect_pass check  sha384     0x0405 38b060a751ac96384cd9327eb1b1e36a21fdb71114b
 expect_pass check  sha512     0x0406 cf83e1357eefb8bdf1542850d66d8007d620e4050b5715dc83f4a921d36ce9ce47d0d13c5d85f2b0ff8318d2877eec2f63b931bd47417a81a538327af927da3e
 expect_pass check  rmd160     0x0403 9c1185a5c5e9fc54612808977ee8f548b2258d31
 expect_pass check  sm3        0x0411 1ab21d8355cfa17f8e61194831e81a8f22bec8c728fefb747ed035eb5082aa2b
+
+# Remaining tests require engine support
+_is_engine_supported
+if [ $? -eq 0 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi
+
 _enable_gost_engine
 expect_pass check  md_gost12_256 0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
 expect_pass check  streebog256   0x0412 3f539a213e97c802cc229d474c6aa32a825a360b2a933a949fd925208d9ce1bb
tests/sign_verify.test +10 -0
index 948892759424..fff9dd7bd42c 100755
@@ -18,6 +18,8 @@
 cd "$(dirname "$0")" || exit 1
 PATH=../src:$PATH
 SIGV1=0
+ENGINE_SUPPORTED=0
+
 source ./functions.sh
 
 _require cmp evmctl getfattr openssl xxd
@@ -418,6 +420,14 @@ if [ -x /opt/openssl3/bin/openssl ]; then
     sign_verify  sm2    sm3    0x030211:K:004[345678]
 fi
 
+# Remaining tests require engine support
+_is_engine_supported
+if [ $? -eq 0 ]; then
+  __skip() { echo "Tests requiring engine support are skipped (not supported)"; return $SKIP; }
+  expect_pass __skip
+  exit 0
+fi
+
 # Test v2 signatures with EC-RDSA
 _enable_gost_engine
 sign_verify  gost2012_256-A md_gost12_256 0x030212:K:0040
Signature · 1 line
2.31.1
#13 lore raw

Re: [PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL v3 "engine" support

Mimi,

Quoted 30 lines · Mimi Zohar

OpenSSL v3 "engine" support is deprecated and replaced with "providers". Engine support will continue to work for a while, but results in deprecated declaration and other messages. One option is simply to hide them ("-Wno-deprecated-declarations"). The other alternative is to conditionally build ima-evm-utils without OpenSSL v3 engine support and without disabling deprecated declarations.

Based on "--disable-engine" or "--enable-engine=no" configuration option, disable OpenSSL v3 "engine" support.

When ima-evm-utils engine support is disabled, don't execute the tests requiring it.

---
 configure.ac           | 13 +++++++++++++
 src/Makefile.am        |  8 ++++++++
 src/evmctl.c           | 17 ++++++++++++++++-
 src/imaevm.h           |  2 ++
 src/libimaevm.c        |  5 +++++
 tests/functions.sh     | 14 +++++++++++++-
 tests/ima_hash.test    |  9 +++++++++
 tests/sign_verify.test | 10 ++++++++++
 8 files changed, 76 insertions(+), 2 deletions(-)
configure.ac +0 -0
index dc666f2bb1fa..1a7d7eb17370 100644

configure.ac AC_ARG_ENABLE(sigv1, · line 57

Quoted 4 lines
configure.ac +1 -0
@@ -54,6 +54,17 @@ AC_ARG_ENABLE(sigv1,
 	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
 	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
 
+AC_ARG_ENABLE(engine,

Thanks.

BTW, if we now have handling of disabled engine -- OpenSSL have defines OPENSSL_NO_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE -- I think if any of them is defined we could disable engine support automatically.

(Just a thought: In general, I would prefer if we rely on what is configured in OpenSSL (whatever is enabled or disabled), and not complicate things for user with post-decision of what is allowed for us from OpenSSL. But of course opinions are different.)

configure.ac AC_ARG_ENABLE(sigv1, · line 58

Quoted 1 line
configure.ac +1 -0
+	      [AS_HELP_STRING([--disable-engine], [build ima-evm-utils without OpenSSL v3 engine support])])

I think "v3" could be removed since it exists in v1 too.

Quoted 13 lines
src/libimaevm.c +1 -0
index 4b37bf5bd62c..ba489402f6f1 100644
@@ -959,6 +959,7 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 	EVP_PKEY *pkey;
 
 	if (!strncmp(keyfile, "pkcs11:", 7)) {
+#ifdef CONFIG_ENGINE
 		if (!imaevm_params.keyid) {
 			log_err("When using a pkcs11 URI you must provide the keyid with an option\n");
 			return NULL;

src/libimaevm.c static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass) · line 980

Quoted 5 lines
src/libimaevm.c +2 -0
@@ -975,6 +976,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 			log_err("Failed to load private key %s\n", keyfile);
 			goto err_engine;
 		}
+#else
+		log_err("OpenSSL 3 \"engine\" support is deprecated\n");

And here too "3" could be removed. And perhaps "is disabled" since this is not just a deprecation warning, but an error.

Thanks,

author maintainer
#14 lore raw

Re: [PATCH ima-evm-utils 08/11] Deprecate use of OpenSSL v3 "engine" support

Hi Vitaly,

Quoted 34 lines · Vitaly Chikunov
Quoted 33 lines · Mimi Zohar

OpenSSL v3 "engine" support is deprecated and replaced with "providers". Engine support will continue to work for a while, but results in deprecated declaration and other messages. One option is simply to hide them ("-Wno-deprecated-declarations"). The other alternative is to conditionally build ima-evm-utils without OpenSSL v3 engine support and without disabling deprecated declarations.

Based on "--disable-engine" or "--enable-engine=no" configuration option, disable OpenSSL v3 "engine" support.

When ima-evm-utils engine support is disabled, don't execute the tests requiring it.

---
 configure.ac           | 13 +++++++++++++
 src/Makefile.am        |  8 ++++++++
 src/evmctl.c           | 17 ++++++++++++++++-
 src/imaevm.h           |  2 ++
 src/libimaevm.c        |  5 +++++
 tests/functions.sh     | 14 +++++++++++++-
 tests/ima_hash.test    |  9 +++++++++
 tests/sign_verify.test | 10 ++++++++++
 8 files changed, 76 insertions(+), 2 deletions(-)
configure.ac +0 -0
index dc666f2bb1fa..1a7d7eb17370 100644
@@ -54,6 +54,17 @@ AC_ARG_ENABLE(sigv1,
 	AM_CONDITIONAL([CONFIG_SIGV1], [test "x$enable_sigv1" = "xyes"])
 	AS_IF([test "$enable_sigv1"  != "yes"], [enable_sigv1="no"])
 
Quoted 7 lines

configure.ac AC_ARG_ENABLE(sigv1, · line 57

Quoted 1 line
configure.ac +1 -0
+AC_ARG_ENABLE(engine,

Thanks.

BTW, if we now have handling of disabled engine -- OpenSSL have defines OPENSSL_NO_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE -- I think if any of them is defined we could disable engine support automatically.

Ok

Quoted 5 lines

(Just a thought: In general, I would prefer if we rely on what is configured in OpenSSL (whatever is enabled or disabled), and not complicate things for user with post-decision of what is allowed for us from OpenSSL. But of course opinions are different.)

Sorry, but at leat for my testing purposes, being able to disable ima- evm-utils OpenSSL engine support without recompiling other packages is a requirement.

Quoted 3 lines

configure.ac AC_ARG_ENABLE(sigv1, · line 58

Quoted 1 line
configure.ac +1 -0
+	      [AS_HELP_STRING([--disable-engine], [build ima-evm-utils without OpenSSL v3 engine support])])

I think "v3" could be removed since it exists in v1 too.

configure.ac currently still limits disabling OpenSSL engine support to v3, but that could be removed.

Quoted 8 lines
Quoted 8 lines
src/libimaevm.c +0 -0
index 4b37bf5bd62c..ba489402f6f1 100644
@@ -959,6 +959,7 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 	EVP_PKEY *pkey;
 
Quoted 14 lines

src/libimaevm.c static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass) · line 980

Quoted 11 lines
src/libimaevm.c +3 -0
 	if (!strncmp(keyfile, "pkcs11:", 7)) {
+#ifdef CONFIG_ENGINE
 		if (!imaevm_params.keyid) {
 			log_err("When using a pkcs11 URI you must provide the keyid with an option\n");
 			return NULL;
@@ -975,6 +976,10 @@ static EVP_PKEY *read_priv_pkey(const char *keyfile, const char *keypass)
 			log_err("Failed to load private key %s\n", keyfile);
 			goto err_engine;
 		}
+#else
+		log_err("OpenSSL 3 \"engine\" support is deprecated\n");

And here too "3" could be removed. And perhaps "is disabled" since this is not just a deprecation warning, but an error.

Sure.

author maintainer
#15 lore raw

PATCH 9/11 Fix potential use after free in read_tpm_banks()

In reply to Mimi Zohar

On failure to read TPM 2.0 bank PCRs 'errmsg' is not properly set to NULL after being freed. Fix potential use after free.

Fixes 3472f9ba9c05 ("ima-evm-utils: read the PCRs for the requested TPM banks")
---
 src/evmctl.c | 1 +
 1 file changed, 1 insertion(+)
src/evmctl.c +1 -0
index fa588e0caba2..a497b1a468d6 100644
@@ -2075,6 +2075,7 @@ static int read_tpm_banks(int num_banks, struct tpm_bank_info *bank)
 				log_debug("Failed to read %s PCRs: (%s)\n",
 					  bank[i].algo_name, errmsg);
 				free(errmsg);
+				errmsg = NULL;
 				bank[i].supported = 0;
 			}
 		}
Signature · 1 line
2.31.1
author maintainer
#16 lore raw

PATCH 10/11 Limit the file hash algorithm name length

In reply to Mimi Zohar

Instead of assuming the file hash algorithm is a properly NULL terminated string, properly limit the "algo:<hash>" field size.

---
 src/evmctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
src/evmctl.c +1 -1
index a497b1a468d6..aac669438a1c 100644
@@ -1602,7 +1602,7 @@ void ima_ng_show(struct template_entry *entry)
 	total_len -= sizeof(field_len);
 
 	algo = (char *)fieldp;
-	len = strlen(algo) + 1;
+	len = strnlen(algo, field_len - 1) + 1;
 	digest_len = field_len - len;
 	digest = fieldp + len;
 
Signature · 1 line
2.31.1
author maintainer
#17 lore raw

PATCH 11/11 Missing template data size lower bounds checking

In reply to Mimi Zohar

Each record in the IMA measurement list must contain some template data. Ensure the template data is not zero length.

---
 src/evmctl.c | 4 ++++
 1 file changed, 4 insertions(+)
src/evmctl.c +4 -0
index aac669438a1c..e603449b7d9e 100644
@@ -2188,6 +2188,10 @@ static int ima_measurement(const char *file)
 				log_err("Unable to read template length\n");
 				goto out;
 			}
+			if (entry.template_len == 0) {
+				log_err("Invalid template data len\n");
+				goto out;
+			}
 		} else {
 			entry.template_len = SHA_DIGEST_LENGTH +
 					     TCG_EVENT_NAME_LEN_MAX + 1;
Signature · 1 line
2.31.1