Skip to contentSkip to conversation

gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx

PATCH Applied Pali Rohár 2 participants 2 messages Sep 6, 2022 – Sep 7, 2022 GPIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx

Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").

Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work:

    [   15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
    [   15.267168] lm90 0-004c: cannot request IRQ 49
    [   15.272708] lm90: probe of 0-004c failed with error -22
Fixes 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
---
 drivers/gpio/gpio-mpc8xxx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpio/gpio-mpc8xxx.c +1 -0
index a964e25ea620..763256efddc2 100644
@@ -172,6 +172,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
 
 	switch (flow_type) {
 	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
 		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 		gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR,
 			gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR)
Signature · 1 line
2.20.1
#1 lore raw
Quoted 32 lines · Pali Rohár

Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").

Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work:

    [   15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
    [   15.267168] lm90 0-004c: cannot request IRQ 49
    [   15.272708] lm90: probe of 0-004c failed with error -22
Fixes 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
---
 drivers/gpio/gpio-mpc8xxx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpio/gpio-mpc8xxx.c +1 -1
index a964e25ea620..763256efddc2 100644
@@ -172,6 +172,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
 
        switch (flow_type) {
        case IRQ_TYPE_EDGE_FALLING:
+       case IRQ_TYPE_LEVEL_LOW:
                raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
                gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR,
                        gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR)
--
Quoted 2 lines

2.20.1

Applied, thanks!

Bart