Skip to contentSkip to conversation

arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro

PATCH Applied Frank Wunderlich 3 participants 3 messages Sep 6, 2022 – Sep 9, 2022

Subsystems (2)
Device tree bindings Arm Rockchip
lore
Share & tools
lore

Frank Wunderlich

author
#0 lore raw

PATCH v2 1/1 arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro

From: Frank Wunderlich <[email protected]>

Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist

Signed-off-by Frank Wunderlich <[email protected]>

---
https://patchwork.kernel.org/project/linux-rockchip/patch/[email protected]/

v2: change _ to - in vcc5v0_usb node

---
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +6 -6
index 7a8d55a898f5..950613595f42 100644
@@ -46,7 +46,7 @@ green_led: led-1 {
 		};
 	};
 
-	dc_12v: dc-12v {
+	dc_12v: dc-12v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";
 		regulator-always-on;

@@ -66,7 +66,7 @@ hdmi_con_in: endpoint {
 		};
 	};
 
-	vcc3v3_sys: vcc3v3-sys {
+	vcc3v3_sys: vcc3v3-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
 		regulator-always-on;

@@ -76,7 +76,7 @@ vcc3v3_sys: vcc3v3-sys {
 		vin-supply = <&dc_12v>;
 	};
 
-	vcc5v0_sys: vcc5v0-sys {
+	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
 		regulator-always-on;

@@ -146,7 +146,7 @@ vcc3v3_ngff: vcc3v3-ngff-regulator {
 		vin-supply = <&vcc3v3_pi6c_05>;
 	};
 
-	vcc5v0_usb: vcc5v0_usb {
+	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;

@@ -156,7 +156,7 @@ vcc5v0_usb: vcc5v0_usb {
 		vin-supply = <&dc_12v>;
 	};
 
-	vcc5v0_usb_host: vcc5v0-usb-host {
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;

@@ -168,7 +168,7 @@ vcc5v0_usb_host: vcc5v0-usb-host {
 		vin-supply = <&vcc5v0_usb>;
 	};
 
-	vcc5v0_usb_otg: vcc5v0-usb-otg {
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
Signature · 1 line
2.34.1
maintainer Applied
#2 lore raw
In reply to Frank Wunderlich
Quoted 2 lines · Frank Wunderlich

Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist

Applied, thanks!

[1/1] arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro

      commit: bc17f2b9608fe2fdccd4fef95ef8b407f5c33174

Best regards,

Signature · 1 line
Heiko Stuebner <[email protected]>