ARM: Add Rockchip RV1126 support
Subsystems (5)
v4 cover ARM: Add Rockchip RV1126 support
RV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application.
It is based on quad-core ARM Cortex-A7 32-bit core which integrates NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16 hybrid operation and computing power is up to 2.0TOPs.
This patch series add basic core support for Rockchip RV1126 and v3 for the series can be found at [1].
Tested in Edgeble AI Edge Compute Module 0.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/
Any inputs?
Jagan.
Elaine Zhang (1):
clk: rockchip: Add MUXTBL variant
Jagan Teki (12):
i2c: rk3x: Add rv1126 support
clk: rockchip: Add dt-binding header for RV1126
dt-bindings: clock: rockchip: Document RV1126 CRU
clk: rockchip: Add clock controller support for RV1126 SoC.
dt-bindings: soc: rockchip: Document RV1126 grf
dt-bindings: soc: rockchip: Document RV1126 pmugrf
ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
ARM: dts: rockchip: Add Rockchip RV1126 SoC
dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
dt-bindings: arm: rockchip: Add Edgeble AI Edge Compute Module 0 Carrier
ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0
ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 Carrier
.../devicetree/bindings/arm/rockchip.yaml | 6 + .../bindings/clock/rockchip,rv1126-cru.yaml | 62 + .../devicetree/bindings/soc/rockchip/grf.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 2 +- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/rv1126-edgeble-ecm0-carrier.dts | 38 + .../rv1126-edgeble-edge-compute-module-0.dtsi | 353 ++++++ arch/arm/boot/dts/rv1126-pinctrl.dtsi | 212 ++++ arch/arm/boot/dts/rv1126.dtsi | 430 +++++++ drivers/clk/rockchip/Kconfig | 7 + drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk-rv1126.c | 1107 +++++++++++++++++ drivers/clk/rockchip/clk.c | 27 +- drivers/clk/rockchip/clk.h | 36 + drivers/i2c/busses/i2c-rk3x.c | 9 + .../dt-bindings/clock/rockchip,rv1126-cru.h | 632 ++++++++++ 17 files changed, 2920 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml create mode 100644 arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts create mode 100644 arch/arm/boot/dts/rv1126-edgeble-edge-compute-module-0.dtsi create mode 100644 arch/arm/boot/dts/rv1126-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/rv1126.dtsi create mode 100644 drivers/clk/rockchip/clk-rv1126.c create mode 100644 include/dt-bindings/clock/rockchip,rv1126-cru.h
Signature · 7 lines
2.25.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v4 1/13 i2c: rk3x: Add rv1126 support
Add i2c support for Rockchip RV1126 SoC.
---
Changes for v4:
- new patch
drivers/i2c/busses/i2c-rk3x.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/i2c/busses/i2c-rk3x.c +9 -0
@@ -1165,6 +1165,11 @@ static const struct rk3x_i2c_soc_data rv1108_soc_data = { .calc_timings = rk3x_i2c_v1_calc_timings, }; +static const struct rk3x_i2c_soc_data rv1126_soc_data = { + .grf_offset =0x118 , + .calc_timings = rk3x_i2c_v1_calc_timings, +}; +static const struct rk3x_i2c_soc_data rk3066_soc_data = { .grf_offset =0x154 , .calc_timings = rk3x_i2c_v0_calc_timings,
@@ -1195,6 +1200,10 @@ static const struct of_device_id rk3x_i2c_match[] = { .compatible = "rockchip,rv1108-i2c", .data = &rv1108_soc_data }, + { + .compatible = "rockchip,rv1126-i2c", + .data = &rv1126_soc_data + }, { .compatible ="rockchip,rk3066-i2c" , .data = &rk3066_soc_data
Signature · 7 lines
2.25.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Re: [PATCH v4 01/13] i2c: rk3x: Add rv1126 support
Hi Jagan,
it looks like this is missing Wolfram Sang, the i2c maintainer?
Am Mittwoch, 7. September 2022, 18:01:55 CEST schrieb Jagan Teki:
Quoted 5 lines
Add i2c support for Rockchip RV1126 SoC.
Signed-off-by David Wu <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Heiko
Quoted 35 lines
---
Changes for v4:
- new patchdrivers/i2c/busses/i2c-rk3x.c | 9 +++++++++ 1 file changed, 9 insertions(+)drivers/i2c/busses/i2c-rk3x.c +9
-0@@ -1165,6 +1165,11 @@ static const struct rk3x_i2c_soc_data rv1108_soc_data = { .calc_timings = rk3x_i2c_v1_calc_timings, }; +static const struct rk3x_i2c_soc_data rv1126_soc_data = { + .grf_offset =0x118 , + .calc_timings = rk3x_i2c_v1_calc_timings, +}; +static const struct rk3x_i2c_soc_data rk3066_soc_data = { .grf_offset =0x154 , .calc_timings = rk3x_i2c_v0_calc_timings,@@ -1195,6 +1200,10 @@ static const struct of_device_id rk3x_i2c_match[] = { .compatible = "rockchip,rv1108-i2c", .data = &rv1108_soc_data }, + { + .compatible = "rockchip,rv1126-i2c", + .data = &rv1126_soc_data + }, { .compatible ="rockchip,rk3066-i2c" , .data = &rk3066_soc_data
Re: [PATCH v4 01/13] i2c: rk3x: Add rv1126 support
Hi Heiko,
Quoted 4 lines · Heiko Stuebner
Hi Jagan,
it looks like this is missing Wolfram Sang, the i2c maintainer?
My bad. I will add him in the next version. Thanks.
Jagan.
PATCH v4 2/13 clk: rockchip: Add MUXTBL variant
In reply to Jagan TekiFrom: Elaine Zhang <[email protected]>
A clock branch consisting of a mux with non-standard select values.
The parent in Mux table is sorted by priority.
---
Changes for v4:
- rebase on -next
Changes for v3, v2:
- none
drivers/clk/rockchip/clk.c | 27 +++++++++++++++++++++------ drivers/clk/rockchip/clk.h | 17 +++++++++++++++++ 2 files changed, 38 insertions(+), 6 deletions(-)
drivers/clk/rockchip/clk.c +21 -6
@@ -40,6 +40,7 @@ static struct clk *rockchip_clk_register_branch(const char *name, const char *const *parent_names, u8 num_parents, void __iomem *base, int muxdiv_offset, u8 mux_shift, u8 mux_width, u8 mux_flags, + u32 *mux_table, int div_offset, u8 div_shift, u8 div_width, u8 div_flags, struct clk_div_table *div_table, int gate_offset, u8 gate_shift, u8 gate_flags, unsigned long flags,
@@ -62,6 +63,7 @@ static struct clk *rockchip_clk_register_branch(const char *name, mux->shift = mux_shift; mux->mask =BIT (mux_width) -1 ; mux->flags = mux_flags; + mux->table = mux_table; mux->lock = lock; mux_ops = (mux_flags &CLK_MUX_READ_ONLY ) ? &clk_mux_ro_ops : &clk_mux_ops;
@@ -270,6 +272,8 @@ static struct clk *rockchip_clk_register_frac_branch( frac_mux->shift = child->mux_shift; frac_mux->mask =BIT (child->mux_width) -1 ; frac_mux->flags = child->mux_flags; +if (child->mux_table) + frac_mux->table = child->mux_table; frac_mux->lock = lock; frac_mux->hw.init = &init;
@@ -444,11 +448,21 @@ void rockchip_clk_register_branches(struct rockchip_clk_provider *ctx,/* catch simple muxes */ switch (list->branch_type) {case branch_mux: - clk =clk_register_mux (NULL , list->name, - list->parent_names, list->num_parents, - flags, ctx->reg_base + list->muxdiv_offset, - list->mux_shift, list->mux_width, - list->mux_flags, &ctx->lock); +if (list->mux_table) + clk =clk_register_mux_table (NULL , list->name, + list->parent_names, list->num_parents, + flags, + ctx->reg_base + list->muxdiv_offset, + list->mux_shift, list->mux_width, + list->mux_flags, list->mux_table, + &ctx->lock); +else + clk =clk_register_mux (NULL , list->name, + list->parent_names, list->num_parents, + flags, + ctx->reg_base + list->muxdiv_offset, + list->mux_shift, list->mux_width, + list->mux_flags, &ctx->lock);break ;case branch_muxgrf: clk = rockchip_clk_register_muxgrf(list->name,
@@ -506,7 +520,8 @@ void rockchip_clk_register_branches(struct rockchip_clk_provider *ctx, ctx->reg_base, list->muxdiv_offset, list->mux_shift, list->mux_width, list->mux_flags, - list->div_offset, list->div_shift, list->div_width, + list->mux_table, list->div_offset, + list->div_shift, list->div_width, list->div_flags, list->div_table, list->gate_offset, list->gate_shift, list->gate_flags, flags, &ctx->lock);
drivers/clk/rockchip/clk.h +17 -0
@@ -448,6 +448,7 @@ struct rockchip_clk_branch {u8 mux_shift;u8 mux_width;u8 mux_flags; +u32 *mux_table;int div_offset;u8 div_shift;u8 div_width;
@@ -680,6 +681,22 @@ struct rockchip_clk_branch { .gate_offset = -1, \ } +#define MUXTBL (_id, cname, pnames, f, o, s, w, mf, mt) \ + { \ + .id = _id, \ + .branch_type = branch_mux, \ + .name = cname, \ + .parent_names = pnames, \ + .num_parents = ARRAY_SIZE(pnames), \ + .flags = f, \ + .muxdiv_offset = o, \ + .mux_shift = s, \ + .mux_width = w, \ + .mux_flags = mf, \ + .gate_offset = -1, \ + .mux_table = mt, \ + } +#define MUXGRF (_id, cname, pnames, f, o, s, w, mf) \ { \ .id = _id, \
Signature · 7 lines
2.25.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v4 3/13 clk: rockchip: Add dt-binding header for RV1126
In reply to Jagan TekiAdd the dt-bindings header for the Rockchip RV1126, that gets shared between the clock controller and the clock references in the dts.
---
Changes for v4:
- update dual-license
Changes for v3:
- update the file name
Changes for v2:
- exclude from clk patch
.../dt-bindings/clock/rockchip,rv1126-cru.h | 632 ++++++++++++++++++ 1 file changed, 632 insertions(+) create mode 100644 include/dt-bindings/clock/rockchip,rv1126-cru.h
include/dt-bindings/clock/rockchip,rv1126-cru.h new file +632 -0
@@ -0,0 +1,632 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* +* Copyright (c) 2019 Rockchip Electronics Co. Ltd. +* Author: Finley Xiao <[email protected]> +*/ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RV1126_H +#define _DT_BINDINGS_CLK_ROCKCHIP_RV1126_H + +/* pmucru-clocks indices */ + +/* pll clocks */ +#define PLL_GPLL 1 + +/* sclk (special clocks) */ +#define CLK_OSC0_DIV32K 2 +#define CLK_RTC32K 3 +#define CLK_WIFI_DIV 4 +#define CLK_WIFI_OSC0 5 +#define CLK_WIFI 6 +#define CLK_PMU 7 +#define SCLK_UART1_DIV 8 +#define SCLK_UART1_FRACDIV 9 +#define SCLK_UART1_MUX 10 +#define SCLK_UART1 11 +#define CLK_I2C0 12 +#define CLK_I2C2 13 +#define CLK_CAPTURE_PWM0 14 +#define CLK_PWM0 15 +#define CLK_CAPTURE_PWM1 16 +#define CLK_PWM1 17 +#define CLK_SPI0 18 +#define DBCLK_GPIO0 19 +#define CLK_PMUPVTM 20 +#define CLK_CORE_PMUPVTM 21 +#define CLK_REF12M 22 +#define CLK_USBPHY_OTG_REF 23 +#define CLK_USBPHY_HOST_REF 24 +#define CLK_REF24M 25 +#define CLK_MIPIDSIPHY_REF 26 + +/* pclk */ +#define PCLK_PDPMU 30 +#define PCLK_PMU 31 +#define PCLK_UART1 32 +#define PCLK_I2C0 33 +#define PCLK_I2C2 34 +#define PCLK_PWM0 35 +#define PCLK_PWM1 36 +#define PCLK_SPI0 37 +#define PCLK_GPIO0 38 +#define PCLK_PMUSGRF 39 +#define PCLK_PMUGRF 40 +#define PCLK_PMUCRU 41 +#define PCLK_CHIPVEROTP 42 +#define PCLK_PDPMU_NIU 43 +#define PCLK_PMUPVTM 44 +#define PCLK_SCRKEYGEN 45 + +#define CLKPMU_NR_CLKS (PCLK_SCRKEYGEN + 1) + +/* cru-clocks indices */ + +/* pll clocks */ +#define PLL_APLL 1 +#define PLL_DPLL 2 +#define PLL_CPLL 3 +#define PLL_HPLL 4 + +/* sclk (special clocks) */ +#define ARMCLK 5 +#define USB480M 6 +#define CLK_CORE_CPUPVTM 7 +#define CLK_CPUPVTM 8 +#define CLK_SCR1 9 +#define CLK_SCR1_CORE 10 +#define CLK_SCR1_RTC 11 +#define CLK_SCR1_JTAG 12 +#define SCLK_UART0_DIV 13 +#define SCLK_UART0_FRAC 14 +#define SCLK_UART0_MUX 15 +#define SCLK_UART0 16 +#define SCLK_UART2_DIV 17 +#define SCLK_UART2_FRAC 18 +#define SCLK_UART2_MUX 19 +#define SCLK_UART2 20 +#define SCLK_UART3_DIV 21 +#define SCLK_UART3_FRAC 22 +#define SCLK_UART3_MUX 23 +#define SCLK_UART3 24 +#define SCLK_UART4_DIV 25 +#define SCLK_UART4_FRAC 26 +#define SCLK_UART4_MUX 27 +#define SCLK_UART4 28 +#define SCLK_UART5_DIV 29 +#define SCLK_UART5_FRAC 30 +#define SCLK_UART5_MUX 31 +#define SCLK_UART5 32 +#define CLK_I2C1 33 +#define CLK_I2C3 34 +#define CLK_I2C4 35 +#define CLK_I2C5 36 +#define CLK_SPI1 37 +#define CLK_CAPTURE_PWM2 38 +#define CLK_PWM2 39 +#define DBCLK_GPIO1 40 +#define DBCLK_GPIO2 41 +#define DBCLK_GPIO3 42 +#define DBCLK_GPIO4 43 +#define CLK_SARADC 44 +#define CLK_TIMER0 45 +#define CLK_TIMER1 46 +#define CLK_TIMER2 47 +#define CLK_TIMER3 48 +#define CLK_TIMER4 49 +#define CLK_TIMER5 50 +#define CLK_CAN 51 +#define CLK_NPU_TSADC 52 +#define CLK_NPU_TSADCPHY 53 +#define CLK_CPU_TSADC 54 +#define CLK_CPU_TSADCPHY 55 +#define CLK_CRYPTO_CORE 56 +#define CLK_CRYPTO_PKA 57 +#define MCLK_I2S0_TX_DIV 58 +#define MCLK_I2S0_TX_FRACDIV 59 +#define MCLK_I2S0_TX_MUX 60 +#define MCLK_I2S0_TX 61 +#define MCLK_I2S0_RX_DIV 62 +#define MCLK_I2S0_RX_FRACDIV 63 +#define MCLK_I2S0_RX_MUX 64 +#define MCLK_I2S0_RX 65 +#define MCLK_I2S0_TX_OUT2IO 66 +#define MCLK_I2S0_RX_OUT2IO 67 +#define MCLK_I2S1_DIV 68 +#define MCLK_I2S1_FRACDIV 69 +#define MCLK_I2S1_MUX 70 +#define MCLK_I2S1 71 +#define MCLK_I2S1_OUT2IO 72 +#define MCLK_I2S2_DIV 73 +#define MCLK_I2S2_FRACDIV 74 +#define MCLK_I2S2_MUX 75 +#define MCLK_I2S2 76 +#define MCLK_I2S2_OUT2IO 77 +#define MCLK_PDM 78 +#define SCLK_ADUPWM_DIV 79 +#define SCLK_AUDPWM_FRACDIV 80 +#define SCLK_AUDPWM_MUX 81 +#define SCLK_AUDPWM 82 +#define CLK_ACDCDIG_ADC 83 +#define CLK_ACDCDIG_DAC 84 +#define CLK_ACDCDIG_I2C 85 +#define CLK_VENC_CORE 86 +#define CLK_VDEC_CORE 87 +#define CLK_VDEC_CA 88 +#define CLK_VDEC_HEVC_CA 89 +#define CLK_RGA_CORE 90 +#define CLK_IEP_CORE 91 +#define CLK_ISP_DIV 92 +#define CLK_ISP_NP5 93 +#define CLK_ISP_NUX 94 +#define CLK_ISP 95 +#define CLK_CIF_OUT_DIV 96 +#define CLK_CIF_OUT_FRACDIV 97 +#define CLK_CIF_OUT_MUX 98 +#define CLK_CIF_OUT 99 +#define CLK_MIPICSI_OUT_DIV 100 +#define CLK_MIPICSI_OUT_FRACDIV 101 +#define CLK_MIPICSI_OUT_MUX 102 +#define CLK_MIPICSI_OUT 103 +#define CLK_ISPP_DIV 104 +#define CLK_ISPP_NP5 105 +#define CLK_ISPP_NUX 106 +#define CLK_ISPP 107 +#define CLK_SDMMC 108 +#define SCLK_SDMMC_DRV 109 +#define SCLK_SDMMC_SAMPLE 110 +#define CLK_SDIO 111 +#define SCLK_SDIO_DRV 112 +#define SCLK_SDIO_SAMPLE 113 +#define CLK_EMMC 114 +#define SCLK_EMMC_DRV 115 +#define SCLK_EMMC_SAMPLE 116 +#define CLK_NANDC 117 +#define SCLK_SFC 118 +#define CLK_USBHOST_UTMI_OHCI 119 +#define CLK_USBOTG_REF 120 +#define CLK_GMAC_DIV 121 +#define CLK_GMAC_RGMII_M0 122 +#define CLK_GMAC_SRC_M0 123 +#define CLK_GMAC_RGMII_M1 124 +#define CLK_GMAC_SRC_M1 125 +#define CLK_GMAC_SRC 126 +#define CLK_GMAC_REF 127 +#define CLK_GMAC_TX_SRC 128 +#define CLK_GMAC_TX_DIV5 129 +#define CLK_GMAC_TX_DIV50 130 +#define RGMII_MODE_CLK 131 +#define CLK_GMAC_RX_SRC 132 +#define CLK_GMAC_RX_DIV2 133 +#define CLK_GMAC_RX_DIV20 134 +#define RMII_MODE_CLK 135 +#define CLK_GMAC_TX_RX 136 +#define CLK_GMAC_PTPREF 137 +#define CLK_GMAC_ETHERNET_OUT 138 +#define CLK_DDRPHY 139 +#define CLK_DDR_MON 140 +#define TMCLK_DDR_MON 141 +#define CLK_NPU_DIV 142 +#define CLK_NPU_NP5 143 +#define CLK_CORE_NPU 144 +#define CLK_CORE_NPUPVTM 145 +#define CLK_NPUPVTM 146 +#define SCLK_DDRCLK 147 +#define CLK_OTP 148 + +/* dclk */ +#define DCLK_DECOM 150 +#define DCLK_VOP_DIV 151 +#define DCLK_VOP_FRACDIV 152 +#define DCLK_VOP_MUX 153 +#define DCLK_VOP 154 +#define DCLK_CIF 155 +#define DCLK_CIFLITE 156 + +/* aclk */ +#define ACLK_PDBUS 160 +#define ACLK_DMAC 161 +#define ACLK_DCF 162 +#define ACLK_SPINLOCK 163 +#define ACLK_DECOM 164 +#define ACLK_PDCRYPTO 165 +#define ACLK_CRYPTO 166 +#define ACLK_PDVEPU 167 +#define ACLK_VENC 168 +#define ACLK_PDVDEC 169 +#define ACLK_PDJPEG 170 +#define ACLK_VDEC 171 +#define ACLK_JPEG 172 +#define ACLK_PDVO 173 +#define ACLK_RGA 174 +#define ACLK_VOP 175 +#define ACLK_IEP 176 +#define ACLK_PDVI_DIV 177 +#define ACLK_PDVI_NP5 178 +#define ACLK_PDVI 179 +#define ACLK_ISP 180 +#define ACLK_CIF 181 +#define ACLK_CIFLITE 182 +#define ACLK_PDISPP_DIV 183 +#define ACLK_PDISPP_NP5 184 +#define ACLK_PDISPP 185 +#define ACLK_ISPP 186 +#define ACLK_PDPHP 187 +#define ACLK_PDUSB 188 +#define ACLK_USBOTG 189 +#define ACLK_PDGMAC 190 +#define ACLK_GMAC 191 +#define ACLK_PDNPU_DIV 192 +#define ACLK_PDNPU_NP5 193 +#define ACLK_PDNPU 194 +#define ACLK_NPU 195 + +/* hclk */ +#define HCLK_PDCORE_NIU 200 +#define HCLK_PDUSB 201 +#define HCLK_PDCRYPTO 202 +#define HCLK_CRYPTO 203 +#define HCLK_PDAUDIO 204 +#define HCLK_I2S0 205 +#define HCLK_I2S1 206 +#define HCLK_I2S2 207 +#define HCLK_PDM 208 +#define HCLK_AUDPWM 209 +#define HCLK_PDVEPU 210 +#define HCLK_VENC 211 +#define HCLK_PDVDEC 212 +#define HCLK_PDJPEG 213 +#define HCLK_VDEC 214 +#define HCLK_JPEG 215 +#define HCLK_PDVO 216 +#define HCLK_RGA 217 +#define HCLK_VOP 218 +#define HCLK_IEP 219 +#define HCLK_PDVI 220 +#define HCLK_ISP 221 +#define HCLK_CIF 222 +#define HCLK_CIFLITE 223 +#define HCLK_PDISPP 224 +#define HCLK_ISPP 225 +#define HCLK_PDPHP 226 +#define HCLK_PDSDMMC 227 +#define HCLK_SDMMC 228 +#define HCLK_PDSDIO 229 +#define HCLK_SDIO 230 +#define HCLK_PDNVM 231 +#define HCLK_EMMC 232 +#define HCLK_NANDC 233 +#define HCLK_SFC 234 +#define HCLK_SFCXIP 235 +#define HCLK_PDBUS 236 +#define HCLK_USBHOST 237 +#define HCLK_USBHOST_ARB 238 +#define HCLK_PDNPU 239 +#define HCLK_NPU 240 + +/* pclk */ +#define PCLK_CPUPVTM 245 +#define PCLK_PDBUS 246 +#define PCLK_DCF 247 +#define PCLK_WDT 248 +#define PCLK_MAILBOX 249 +#define PCLK_UART0 250 +#define PCLK_UART2 251 +#define PCLK_UART3 252 +#define PCLK_UART4 253 +#define PCLK_UART5 254 +#define PCLK_I2C1 255 +#define PCLK_I2C3 256 +#define PCLK_I2C4 257 +#define PCLK_I2C5 258 +#define PCLK_SPI1 259 +#define PCLK_PWM2 261 +#define PCLK_GPIO1 262 +#define PCLK_GPIO2 263 +#define PCLK_GPIO3 264 +#define PCLK_GPIO4 265 +#define PCLK_SARADC 266 +#define PCLK_TIMER 267 +#define PCLK_DECOM 268 +#define PCLK_CAN 269 +#define PCLK_NPU_TSADC 270 +#define PCLK_CPU_TSADC 271 +#define PCLK_ACDCDIG 272 +#define PCLK_PDVO 273 +#define PCLK_DSIHOST 274 +#define PCLK_PDVI 275 +#define PCLK_CSIHOST 276 +#define PCLK_PDGMAC 277 +#define PCLK_GMAC 278 +#define PCLK_PDDDR 279 +#define PCLK_DDR_MON 280 +#define PCLK_PDNPU 281 +#define PCLK_NPUPVTM 282 +#define PCLK_PDTOP 283 +#define PCLK_TOPCRU 284 +#define PCLK_TOPGRF 285 +#define PCLK_CPUEMADET 286 +#define PCLK_DDRPHY 287 +#define PCLK_DSIPHY 289 +#define PCLK_CSIPHY0 290 +#define PCLK_CSIPHY1 291 +#define PCLK_USBPHY_HOST 292 +#define PCLK_USBPHY_OTG 293 +#define PCLK_OTP 294 + +#define CLK_NR_CLKS (PCLK_OTP + 1) + +/* pmu soft-reset indices */ + +/* pmu_cru_softrst_con0 */ +#define SRST_PDPMU_NIU_P 0 +#define SRST_PMU_SGRF_P 1 +#define SRST_PMU_SGRF_REMAP_P 2 +#define SRST_I2C0_P 3 +#define SRST_I2C0 4 +#define SRST_I2C2_P 7 +#define SRST_I2C2 8 +#define SRST_UART1_P 9 +#define SRST_UART1 10 +#define SRST_PWM0_P 11 +#define SRST_PWM0 12 +#define SRST_PWM1_P 13 +#define SRST_PWM1 14 +#define SRST_DDR_FAIL_SAFE 15 + +/* pmu_cru_softrst_con1 */ +#define SRST_GPIO0_P 17 +#define SRST_GPIO0_DB 18 +#define SRST_SPI0_P 19 +#define SRST_SPI0 20 +#define SRST_PMUGRF_P 21 +#define SRST_CHIPVEROTP_P 22 +#define SRST_PMUPVTM 24 +#define SRST_PMUPVTM_P 25 +#define SRST_PMUCRU_P 30 + +/* soft-reset indices */ + +/* cru_softrst_con0 */ +#define SRST_CORE0_PO 0 +#define SRST_CORE1_PO 1 +#define SRST_CORE2_PO 2 +#define SRST_CORE3_PO 3 +#define SRST_CORE0 4 +#define SRST_CORE1 5 +#define SRST_CORE2 6 +#define SRST_CORE3 7 +#define SRST_CORE0_DBG 8 +#define SRST_CORE1_DBG 9 +#define SRST_CORE2_DBG 10 +#define SRST_CORE3_DBG 11 +#define SRST_NL2 12 +#define SRST_CORE_NIU_A 13 +#define SRST_DBG_DAPLITE_P 14 +#define SRST_DAPLITE_P 15 + +/* cru_softrst_con1 */ +#define SRST_PDBUS_NIU1_A 16 +#define SRST_PDBUS_NIU1_H 17 +#define SRST_PDBUS_NIU1_P 18 +#define SRST_PDBUS_NIU2_A 19 +#define SRST_PDBUS_NIU2_H 20 +#define SRST_PDBUS_NIU3_A 21 +#define SRST_PDBUS_NIU3_H 22 +#define SRST_PDBUS_HOLD_NIU1_A 23 +#define SRST_DBG_NIU_P 24 +#define SRST_PDCORE_NIIU_H 25 +#define SRST_MUC_NIU 26 +#define SRST_DCF_A 29 +#define SRST_DCF_P 30 +#define SRST_SYSTEM_SRAM_A 31 + +/* cru_softrst_con2 */ +#define SRST_I2C1_P 32 +#define SRST_I2C1 33 +#define SRST_I2C3_P 34 +#define SRST_I2C3 35 +#define SRST_I2C4_P 36 +#define SRST_I2C4 37 +#define SRST_I2C5_P 38 +#define SRST_I2C5 39 +#define SRST_SPI1_P 40 +#define SRST_SPI1 41 +#define SRST_MCU_CORE 42 +#define SRST_PWM2_P 44 +#define SRST_PWM2 45 +#define SRST_SPINLOCK_A 46 + +/* cru_softrst_con3 */ +#define SRST_UART0_P 48 +#define SRST_UART0 49 +#define SRST_UART2_P 50 +#define SRST_UART2 51 +#define SRST_UART3_P 52 +#define SRST_UART3 53 +#define SRST_UART4_P 54 +#define SRST_UART4 55 +#define SRST_UART5_P 56 +#define SRST_UART5 57 +#define SRST_WDT_P 58 +#define SRST_SARADC_P 59 +#define SRST_GRF_P 61 +#define SRST_TIMER_P 62 +#define SRST_MAILBOX_P 63 + +/* cru_softrst_con4 */ +#define SRST_TIMER0 64 +#define SRST_TIMER1 65 +#define SRST_TIMER2 66 +#define SRST_TIMER3 67 +#define SRST_TIMER4 68 +#define SRST_TIMER5 69 +#define SRST_INTMUX_P 70 +#define SRST_GPIO1_P 72 +#define SRST_GPIO1_DB 73 +#define SRST_GPIO2_P 74 +#define SRST_GPIO2_DB 75 +#define SRST_GPIO3_P 76 +#define SRST_GPIO3_DB 77 +#define SRST_GPIO4_P 78 +#define SRST_GPIO4_DB 79 + +/* cru_softrst_con5 */ +#define SRST_CAN_P 80 +#define SRST_CAN 81 +#define SRST_DECOM_A 85 +#define SRST_DECOM_P 86 +#define SRST_DECOM_D 87 +#define SRST_PDCRYPTO_NIU_A 88 +#define SRST_PDCRYPTO_NIU_H 89 +#define SRST_CRYPTO_A 90 +#define SRST_CRYPTO_H 91 +#define SRST_CRYPTO_CORE 92 +#define SRST_CRYPTO_PKA 93 +#define SRST_SGRF_P 95 + +/* cru_softrst_con6 */ +#define SRST_PDAUDIO_NIU_H 96 +#define SRST_PDAUDIO_NIU_P 97 +#define SRST_I2S0_H 98 +#define SRST_I2S0_TX_M 99 +#define SRST_I2S0_RX_M 100 +#define SRST_I2S1_H 101 +#define SRST_I2S1_M 102 +#define SRST_I2S2_H 103 +#define SRST_I2S2_M 104 +#define SRST_PDM_H 105 +#define SRST_PDM_M 106 +#define SRST_AUDPWM_H 107 +#define SRST_AUDPWM 108 +#define SRST_ACDCDIG_P 109 +#define SRST_ACDCDIG 110 + +/* cru_softrst_con7 */ +#define SRST_PDVEPU_NIU_A 112 +#define SRST_PDVEPU_NIU_H 113 +#define SRST_VENC_A 114 +#define SRST_VENC_H 115 +#define SRST_VENC_CORE 116 +#define SRST_PDVDEC_NIU_A 117 +#define SRST_PDVDEC_NIU_H 118 +#define SRST_VDEC_A 119 +#define SRST_VDEC_H 120 +#define SRST_VDEC_CORE 121 +#define SRST_VDEC_CA 122 +#define SRST_VDEC_HEVC_CA 123 +#define SRST_PDJPEG_NIU_A 124 +#define SRST_PDJPEG_NIU_H 125 +#define SRST_JPEG_A 126 +#define SRST_JPEG_H 127 + +/* cru_softrst_con8 */ +#define SRST_PDVO_NIU_A 128 +#define SRST_PDVO_NIU_H 129 +#define SRST_PDVO_NIU_P 130 +#define SRST_RGA_A 131 +#define SRST_RGA_H 132 +#define SRST_RGA_CORE 133 +#define SRST_VOP_A 134 +#define SRST_VOP_H 135 +#define SRST_VOP_D 136 +#define SRST_TXBYTEHS_DSIHOST 137 +#define SRST_DSIHOST_P 138 +#define SRST_IEP_A 139 +#define SRST_IEP_H 140 +#define SRST_IEP_CORE 141 +#define SRST_ISP_RX_P 142 + +/* cru_softrst_con9 */ +#define SRST_PDVI_NIU_A 144 +#define SRST_PDVI_NIU_H 145 +#define SRST_PDVI_NIU_P 146 +#define SRST_ISP 147 +#define SRST_CIF_A 148 +#define SRST_CIF_H 149 +#define SRST_CIF_D 150 +#define SRST_CIF_P 151 +#define SRST_CIF_I 152 +#define SRST_CIF_RX_P 153 +#define SRST_PDISPP_NIU_A 154 +#define SRST_PDISPP_NIU_H 155 +#define SRST_ISPP_A 156 +#define SRST_ISPP_H 157 +#define SRST_ISPP 158 +#define SRST_CSIHOST_P 159 + +/* cru_softrst_con10 */ +#define SRST_PDPHPMID_NIU_A 160 +#define SRST_PDPHPMID_NIU_H 161 +#define SRST_PDNVM_NIU_H 163 +#define SRST_SDMMC_H 164 +#define SRST_SDIO_H 165 +#define SRST_EMMC_H 166 +#define SRST_SFC_H 167 +#define SRST_SFCXIP_H 168 +#define SRST_SFC 169 +#define SRST_NANDC_H 170 +#define SRST_NANDC 171 +#define SRST_PDSDMMC_H 173 +#define SRST_PDSDIO_H 174 + +/* cru_softrst_con11 */ +#define SRST_PDUSB_NIU_A 176 +#define SRST_PDUSB_NIU_H 177 +#define SRST_USBHOST_H 178 +#define SRST_USBHOST_ARB_H 179 +#define SRST_USBHOST_UTMI 180 +#define SRST_USBOTG_A 181 +#define SRST_USBPHY_OTG_P 182 +#define SRST_USBPHY_HOST_P 183 +#define SRST_USBPHYPOR_OTG 184 +#define SRST_USBPHYPOR_HOST 185 +#define SRST_PDGMAC_NIU_A 188 +#define SRST_PDGMAC_NIU_P 189 +#define SRST_GMAC_A 190 + +/* cru_softrst_con12 */ +#define SRST_DDR_DFICTL_P 193 +#define SRST_DDR_MON_P 194 +#define SRST_DDR_STANDBY_P 195 +#define SRST_DDR_GRF_P 196 +#define SRST_DDR_MSCH_P 197 +#define SRST_DDR_SPLIT_A 198 +#define SRST_DDR_MSCH 199 +#define SRST_DDR_DFICTL 202 +#define SRST_DDR_STANDBY 203 +#define SRST_NPUMCU_NIU 205 +#define SRST_DDRPHY_P 206 +#define SRST_DDRPHY 207 + +/* cru_softrst_con13 */ +#define SRST_PDNPU_NIU_A 208 +#define SRST_PDNPU_NIU_H 209 +#define SRST_PDNPU_NIU_P 210 +#define SRST_NPU_A 211 +#define SRST_NPU_H 212 +#define SRST_NPU 213 +#define SRST_NPUPVTM_P 214 +#define SRST_NPUPVTM 215 +#define SRST_NPU_TSADC_P 216 +#define SRST_NPU_TSADC 217 +#define SRST_NPU_TSADCPHY 218 +#define SRST_CIFLITE_A 220 +#define SRST_CIFLITE_H 221 +#define SRST_CIFLITE_D 222 +#define SRST_CIFLITE_RX_P 223 + +/* cru_softrst_con14 */ +#define SRST_TOPNIU_P 224 +#define SRST_TOPCRU_P 225 +#define SRST_TOPGRF_P 226 +#define SRST_CPUEMADET_P 227 +#define SRST_CSIPHY0_P 228 +#define SRST_CSIPHY1_P 229 +#define SRST_DSIPHY_P 230 +#define SRST_CPU_TSADC_P 232 +#define SRST_CPU_TSADC 233 +#define SRST_CPU_TSADCPHY 234 +#define SRST_CPUPVTM_P 235 +#define SRST_CPUPVTM 236 + +#endif
Signature · 7 lines
2.25.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Re: [PATCH v4 03/13] clk: rockchip: Add dt-binding header for RV1126
Quoted 13 lines · Jagan Teki
Add the dt-bindings header for the Rockchip RV1126, that gets shared between the clock controller and the clock references in the dts.
Signed-off-by Finley Xiao <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
Changes for v4:
- update dual-license
Changes for v3:
- update the file name
Changes for v2:
- exclude from clk patch
Quoted 4 lines
.../dt-bindings/clock/rockchip,rv1126-cru.h | 632 ++++++++++++++++++ 1 file changed, 632 insertions(+) create mode 100644 include/dt-bindings/clock/rockchip,rv1126-cru.h
PATCH v4 4/13 dt-bindings: clock: rockchip: Document RV1126 CRU
In reply to Jagan TekiDocument dt-bindings for Rockchip RV1126 clock controller.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- fixed title
- remove '|' in description
- add one example
.../bindings/clock/rockchip,rv1126-cru.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml new file +62 -0
@@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1126 Clock and Reset Unit + +maintainers: + - Jagan Teki <[email protected]> + - Finley Xiao <[email protected]> + - Heiko Stuebner <[email protected]> + +description: + The RV1126 clock controller generates the clock and also implements a + reset controller for SoC peripherals. + +properties: + compatible: + enum: + - rockchip,rv1126-cru + - rockchip,rv1126-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff490000 { + compatible = "rockchip,rv1126-cru"; + reg = <0xff490000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + };
Signature · 7 lines
2.25.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v4 5/13 clk: rockchip: Add clock controller support for RV1126 SoC.
In reply to Jagan TekiClock & Reset Unit (CRU) in RV1126 support clocks for CRU and CRU_PMU blocks.
This patch is trying to add minimal Clock-Architecture Diagram's inferred from [1] authored by Finley Xiao.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/clk/rockchip/clk-rv1126.c
---
Changes for v4:
- rebase on -next
Changes for v3:
- update file name of rv1126-cru.h
Changes for v2:
- none
drivers/clk/rockchip/Kconfig | 7 + drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk-rv1126.c | 1107 +++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h | 19 + 4 files changed, 1134 insertions(+) create mode 100644 drivers/clk/rockchip/clk-rv1126.c
drivers/clk/rockchip/Kconfig +7 -0
@@ -23,6 +23,13 @@ config CLK_RV110X help Build the driver for RV110x Clock Driver. +config CLK_RV1126 + bool "Rockchip RV1126 clock controller support" + depends on ARM || COMPILE_TEST + default y + help + Build the driver for RV1126 Clock Driver. + config CLK_RK3036 bool "Rockchip RK3036 clock controller support" depends on ARM || COMPILE_TEST
drivers/clk/rockchip/Makefile +1 -0
@@ -17,6 +17,7 @@ clk-rockchip-$(CONFIG_RESET_CONTROLLER) += softrst.o obj-$(CONFIG_CLK_PX30) += clk-px30.o obj-$(CONFIG_CLK_RV110X) += clk-rv1108.o +obj-$(CONFIG_CLK_RV1126) += clk-rv1126.o obj-$(CONFIG_CLK_RK3036) += clk-rk3036.o obj-$(CONFIG_CLK_RK312X) += clk-rk3128.o obj-$(CONFIG_CLK_RK3188) += clk-rk3188.o
drivers/clk/rockchip/clk-rv1126.c new file +1107 -0
1,107 lines not on this page · raw message
drivers/clk/rockchip/clk.h +19 -0
@@ -79,6 +79,25 @@ struct clk;#define RV1108_EMMC_CON0 0x1e8#define RV1108_EMMC_CON1 0x1ec +#define RV1126_PMU_MODE 0x0 +#define RV1126_PMU_PLL_CON (x) ((x) * 0x4 + 0x10) +#define RV1126_PMU_CLKSEL_CON (x) ((x) * 0x4 + 0x100) +#define RV1126_PMU_CLKGATE_CON (x) ((x) * 0x4 + 0x180) +#define RV1126_PMU_SOFTRST_CON (x) ((x) * 0x4 + 0x200) +#define RV1126_PLL_CON (x) ((x) * 0x4) +#define RV1126_MODE_CON 0x90 +#define RV1126_CLKSEL_CON (x) ((x) * 0x4 + 0x100) +#define RV1126_CLKGATE_CON (x) ((x) * 0x4 + 0x280) +#define RV1126_SOFTRST_CON (x) ((x) * 0x4 + 0x300) +#define RV1126_GLB_SRST_FST 0x408 +#define RV1126_GLB_SRST_SND 0x40c +#define RV1126_SDMMC_CON0 0x440 +#define RV1126_SDMMC_CON1 0x444 +#define RV1126_SDIO_CON0 0x448 +#define RV1126_SDIO_CON1 0x44c +#define RV1126_EMMC_CON0 0x450 +#define RV1126_EMMC_CON1 0x454 +#define RK2928_PLL_CON (x) ((x) * 0x4)#define RK2928_MODE_CON 0x40#define RK2928_CLKSEL_CON (x) ((x) * 0x4 + 0x44)
Signature · 1 line
2.25.1
Heiko Stuebner
maintainerRe: [PATCH v4 05/13] clk: rockchip: Add clock controller support for RV1126 SoC.
Hi Jagan,
Am Mittwoch, 7. September 2022, 18:01:59 CEST schrieb Jagan Teki:
Quoted 14 lines
Clock & Reset Unit (CRU) in RV1126 support clocks for CRU and
CRU_PMUblocks.This patch is trying to add minimal Clock-Architecture Diagram's inferred from [1] authored by Finley Xiao.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/clk/rockchip/clk-rv1126.c
Cc Michael Turquette <[email protected]>Cc Stephen Boyd <[email protected]>Signed-off-by Finley Xiao <[email protected]>Signed-off-by Jagan Teki <[email protected]>---
[...]
Quoted 21 lines
drivers/clk/rockchip/clk-rv1126.c new file +21
-0+static void __init rv1126_pmu_clk_init (struct device_node *np) +{ +struct rockchip_clk_provider *ctx; +void __iomem *reg_base; + + reg_base =of_iomap (np,0 ); +if (!reg_base) { +pr_err ("%s: could not map cru pmu region\n" , __func__); +return ; + } + + ctx =rockchip_clk_init (np, reg_base,CLKPMU_NR_CLKS ); +if (IS_ERR (ctx)) { +pr_err ("%s: rockchip pmu clk init failed\n" , __func__); +return ; + } + +rockchip_clk_register_plls (ctx, rv1126_pmu_pll_clks, +ARRAY_SIZE (rv1126_pmu_pll_clks), +RV1126_GRF_SOC_STATUS0 ); +
drivers/clk/rockchip/clk-rv1126.c line 1064
Quoted 10 lines
drivers/clk/rockchip/clk-rv1126.c new file +10
-0+rockchip_clk_register_branches (ctx, rv1126_clk_pmu_branches, +ARRAY_SIZE (rv1126_clk_pmu_branches)); + +rockchip_register_softrst (np,2 , reg_base +RV1126_PMU_SOFTRST_CON (0 ), +ROCKCHIP_SOFTRST_HIWORD_MASK ); + +rockchip_clk_of_add_provider (np, ctx); +} + +CLK_OF_DECLARE (rv1126_cru_pmu,"rockchip,rv1126-pmucru" , rv1126_pmu_clk_init);
both of these want to be platform-drivers nowadays.
Take a look at rk3399 and rk3568 for reference.
Thanks
Heiko
Quoted 43 lines
drivers/clk/rockchip/clk-rv1126.c new file +43
-0+ +static void __init rv1126_clk_init (struct device_node *np) +{ +struct rockchip_clk_provider *ctx; +void __iomem *reg_base; + + reg_base =of_iomap (np,0 ); +if (!reg_base) { +pr_err ("%s: could not map cru region\n" , __func__); +return ; + } + + ctx =rockchip_clk_init (np, reg_base,CLK_NR_CLKS ); +if (IS_ERR (ctx)) { +pr_err ("%s: rockchip clk init failed\n" , __func__); +iounmap (reg_base); +return ; + } + +rockchip_clk_register_plls (ctx, rv1126_pll_clks, +ARRAY_SIZE (rv1126_pll_clks), +RV1126_GRF_SOC_STATUS0 ); + +rockchip_clk_register_armclk (ctx,ARMCLK ,"armclk" , + mux_armclk_p,ARRAY_SIZE (mux_armclk_p), + &rv1126_cpuclk_data, rv1126_cpuclk_rates, +ARRAY_SIZE (rv1126_cpuclk_rates)); + +rockchip_clk_register_branches (ctx, rv1126_clk_branches, +ARRAY_SIZE (rv1126_clk_branches)); + +rockchip_register_softrst (np,15 , reg_base +RV1126_SOFTRST_CON (0 ), +ROCKCHIP_SOFTRST_HIWORD_MASK ); + +rockchip_register_restart_notifier (ctx,RV1126_GLB_SRST_FST ,NULL ); + +rockchip_clk_protect_critical (rv1126_cru_critical_clocks, +ARRAY_SIZE (rv1126_cru_critical_clocks)); + +rockchip_clk_of_add_provider (np, ctx); +} + +CLK_OF_DECLARE (rv1126_cru,"rockchip,rv1126-cru" , rv1126_clk_init);
PATCH v4 6/13 dt-bindings: soc: rockchip: Document RV1126 grf
In reply to Jagan TekiDocument compatible string for Rockchip RV1126 grf.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- collect Rob ack
Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/soc/rockchip/grf.yaml +1 -0
@@ -48,6 +48,7 @@ properties: - rockchip,rk3568-pmugrf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf + - rockchip,rv1126-grf - const: syscon - const: simple-mfd
Signature · 7 lines
2.25.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v4 7/13 dt-bindings: soc: rockchip: Document RV1126 pmugrf
In reply to Jagan TekiDocument compatible string for Rockchip RV1126 pmugrf.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- collect Rob ack
Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/soc/rockchip/grf.yaml +1 -0
@@ -49,6 +49,7 @@ properties: - rockchip,rv1108-grf - rockchip,rv1108-pmugrf - rockchip,rv1126-grf + - rockchip,rv1126-pmugrf - const: syscon - const: simple-mfd
Signature · 1 line
2.25.1
PATCH v4 8/13 ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
In reply to Jagan TekiAdd pinctrl definitions for Rockchip RV1126 and the pinctrl conf's are included it from arm64 rockchip devicetree path.
---
Changes for v4:
- update i2c pins
- rebase on -next
Changes for v3:
- none
Changes for v2:
- spilt pinctrl as separate patch
MAINTAINERS | 2 +- arch/arm/boot/dts/rv1126-pinctrl.dtsi | 212 ++++++++++++++++++++++++++ 2 files changed, 213 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rv1126-pinctrl.dtsi
MAINTAINERS +1 -1
@@ -2690,7 +2690,7 @@ F: Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml F: arch/arm/boot/dts/rk3* -F: arch/arm/boot/dts/rv1108* +F: arch/arm/boot/dts/rv11* F: arch/arm/mach-rockchip/ F: drivers/*/*/*rockchip* F: drivers/*/*rockchip*
arch/arm/boot/dts/rv1126-pinctrl.dtsi new file +212 -0
212 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v4 9/13 ARM: dts: rockchip: Add Rockchip RV1126 SoC
In reply to Jagan TekiRV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application.
It is based on quad-core ARM Cortex-A7 32-bit core which integrates NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16 hybrid operation and computing power is up to 2.0TOPs.
This patch add basic core dtsi support.
---
Changes for v4:
- update i2c0
- rebase on -next
Changes for v3:
- update cru and power file names
Changes for v2:
- split pinctrl in separate patch
arch/arm/boot/dts/rv1126.dtsi | 430 ++++++++++++++++++++++++++++++++++ 1 file changed, 430 insertions(+) create mode 100644 arch/arm/boot/dts/rv1126.dtsi
arch/arm/boot/dts/rv1126.dtsi new file +430 -0
@@ -0,0 +1,430 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +#include <dt-bindings/clock/rockchip,rv1126-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rockchip,rv1126-power.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rv1126"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clocks = <&cru ARMCLK>; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + clocks = <&cru ARMCLK>; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + clocks = <&cru ARMCLK>; + }; + + cpu3: cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + clocks = <&cru ARMCLK>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + grf: syscon@fe000000 { + compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd"; + reg = <0xfe000000 0x20000>; + }; + + pmugrf: syscon@fe020000 { + compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd"; + reg = <0xfe020000 0x1000>; + + pmu_io_domains: io-domains { + compatible = "rockchip,rv1126-pmu-io-voltage-domain"; + status = "disabled"; + }; + }; + + qos_emmc: qos@fe860000 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe860000 0x20>; + }; + + qos_nandc: qos@fe860080 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe860080 0x20>; + }; + + qos_sfc: qos@fe860200 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe860200 0x20>; + }; + + qos_sdio: qos@fe86c000 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe86c000 0x20>; + }; + + gic: interrupt-controller@feff0000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0xfeff1000 0x1000>, + <0xfeff2000 0x2000>, + <0xfeff4000 0x2000>, + <0xfeff6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pmu: power-management@ff3e0000 { + compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd"; + reg = <0xff3e0000 0x1000>; + + power: power-controller { + compatible = "rockchip,rv1126-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RV1126_PD_NVM { + reg = <RV1126_PD_NVM>; + clocks = <&cru HCLK_EMMC>, + <&cru CLK_EMMC>, + <&cru HCLK_NANDC>, + <&cru CLK_NANDC>, + <&cru HCLK_SFC>, + <&cru HCLK_SFCXIP>, + <&cru SCLK_SFC>; + pm_qos = <&qos_emmc>, + <&qos_nandc>, + <&qos_sfc>; + #power-domain-cells = <0>; + }; + + power-domain@RV1126_PD_SDIO { + reg = <RV1126_PD_SDIO>; + clocks = <&cru HCLK_SDIO>, + <&cru CLK_SDIO>; + pm_qos = <&qos_sdio>; + #power-domain-cells = <0>; + }; + }; + }; + + i2c0: i2c@ff3f0000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff3f0000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + rockchip,grf = <&pmugrf>; + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dmac: dma-controller@ff4e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff4e0000 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + + uart1: serial@ff410000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff410000 0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 7>, <&dmac 6>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pmucru: clock-controller@ff480000 { + compatible = "rockchip,rv1126-pmucru"; + reg = <0xff480000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff490000 { + compatible = "rockchip,rv1126-cru"; + reg = <0xff490000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + uart0: serial@ff560000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff560000 0x100>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 5>, <&dmac 4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@ff570000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff570000 0x100>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 9>, <&dmac 8>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@ff580000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff580000 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 11>, <&dmac 10>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@ff590000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff590000 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 13>, <&dmac 12>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart5: serial@ff5a0000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff5a0000 0x100>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + dmas = <&dmac 15>, <&dmac 14>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + saradc: saradc@ff5e0000 { + compatible = "rockchip,rk3399-saradc"; + reg = <0xff5e0000 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + timer: timer@ff660000 { + compatible = "rockchip,rk3288-timer"; + reg = <0xff660000 0x20>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + emmc: mmc@ffc50000 { + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0xffc50000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + power-domains = <&power RV1126_PD_NVM>; + status = "disabled"; + }; + + sdmmc: mmc@ffc60000 { + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0xffc60000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + status = "disabled"; + }; + + sdio: mmc@ffc70000 { + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0xffc70000 0x4000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + power-domains = <&power RV1126_PD_SDIO>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rv1126-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@ff460000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff460000 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff620000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff620000 0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff630000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff630000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff640000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff640000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff650000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff650000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rv1126-pinctrl.dtsi"
Signature · 1 line
2.25.1
PATCH v4 10/13 dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
In reply to Jagan TekiEdgeble AI is an Artificial Intelligence company with a focus on deploying Neural Acceleration principles at the Edge.
Add vendor prefix for it.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- collect Ron ack
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -364,6 +364,8 @@ patternProperties: description: EBV Elektronik "^eckelmann,.*": description: Eckelmann AG + "^edgeble,.*": + description: Edgeble AI Technologies Pvt. Ltd. "^edimax,.*": description: EDIMAX Technology Co., Ltd "^edt,.*":
Signature · 1 line
2.25.1
PATCH v4 11/13 dt-bindings: arm: rockchip: Add Edgeble AI Edge Compute Module 0 Carrier
In reply to Jagan TekiEdge Compute Module 0 is a 96boards SoM-CB compute module based on Rockchip RV1126 from Edgeble AI.
Edge Compute Module 0 Carrier board is an industrial form factor evaluation board from Edgeble AI.
Edge Compute Module 0 needs to mount on top of this evaluation board for creating complete Edge Compute Module 0 Carrier board.
Add dt-bindings for it.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- collect Ron ack
Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +6 -0
@@ -65,6 +65,12 @@ properties: - const: chipspark,rayeager-px2 - const: rockchip,rk3066a + - description: Edgeble AI Edge Compute Module 0 SoM based boards + items: + - const: edgeble,edge-compute-module-0-carrier # Edgeble AI Edge Compute Module 0 Carrier + - const: edgeble,edge-compute-module-0 # Edgeble AI Edge Compute Module 0 SoM + - const: rockchip,rv1126 + - description: Elgin RV1108 R1 items: - const: elgin,rv1108-r1
Signature · 1 line
2.25.1
PATCH v4 12/13 ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0
In reply to Jagan TekiEdge Compute Module 0 is a 96boards SoM-CB compute module based on Rockchip RV1126 from Edgeble AI.
General features:
- Rockchip RV1126
- 2/4GB LPDDR4
- 16GB eMMC
- Fn-link 8223A-SR WiFi/BT
Edge Compute Module 0 needs to mount on top of Edgeble AI Carrier boards for creating complete platform solutions.
Add support for it.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- change meaninful dtsi name
.../rv1126-edgeble-edge-compute-module-0.dtsi | 353 ++++++++++++++++++ 1 file changed, 353 insertions(+) create mode 100644 arch/arm/boot/dts/rv1126-edgeble-edge-compute-module-0.dtsi
arch/arm/boot/dts/rv1126-edgeble-edge-compute-module-0.dtsi new file +353 -0
@@ -0,0 +1,353 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +/ { + compatible = "edgeble,edge-compute-module-0", "rockchip,rv1126"; + + aliases { + mmc0 = &emmc; + }; + + vcc5v0_sys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&flash_vol_sel>; + regulator-name = "vccio_flash"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccio_flash>; + rockchip,default-sample-phase = <90>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5>; + vcc6-supply = <&vcc_buck5>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_npu_vepu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu_vepu"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_arm"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc3v3_sys"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-name = "vcc_buck5"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2200000>; + }; + }; + + vcc_0v8: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-name = "vcc_0v8"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd0v8_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-name = "vcc0v8_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <800000>; + }; + }; + + vcc_1v8: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_dovdd: LDO_REG5 { + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_dovdd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_dvdd: LDO_REG6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc_dvdd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_avdd: LDO_REG7 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc_avdd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0: SWITCH_REG1 { + regulator-name = "vcc_5v0"; + }; + + vcc_3v3: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + }; + }; + }; +}; + +&pinctrl { + bt { + bt_enable: bt-enable { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + flash { + flash_vol_sel: flash-vol-sel { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio0-supply = <&vcc1v8_pmu>; + pmuio1-supply = <&vcc3v3_sys>; + vccio1-supply = <&vccio_flash>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_1v8>; + vccio4-supply = <&vcc_dovdd>; + vccio5-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_dovdd>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + rockchip,default-sample-phase = <90>; + sd-uhs-sdr104; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; + status = "okay"; + + bluetooth { + compatible = "qcom,qca9377-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */ + max-speed = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable>; + vddxo-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +};
Signature · 1 line
2.25.1
PATCH v4 13/13 ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 Carrier
In reply to Jagan TekiEdge Compute Module 0 Carrier is an industrial form factor evaluation board from Edgeble AI.
General features:
- microSD slot
- 2x MIPI CSI2 connectors
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion
Edge Compute Module 0 needs to mount on top of this Carrier board for creating Edge Compute Module 0 Carrier platform.
Add support for it.
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- change easy and meaningful dts name
arch/arm/boot/dts/Makefile | 1 + .../boot/dts/rv1126-edgeble-ecm0-carrier.dts | 38 +++++++++++++++++++ 2 files changed, 39 insertions(+) create mode 100644 arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1114,6 +1114,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-elgin-r1.dtb \ rv1108-evb.dtb \ + rv1126-edgeble-ecm0-carrier.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \
arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +/dts-v1/; +#include "rv1126.dtsi" +#include "rv1126-edgeble-edge-compute-module-0.dtsi" + +/ { + model = "Edgeble AI Edge Compute Module 0 Carrier board"; + compatible = "edgeble,edge-compute-module-0-carrier", + "edgeble,edge-compute-module-0", "rockchip,rv1126"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>; + rockchip,default-sample-phase = <90>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +};
Signature · 1 line
2.25.1
Re: (subset) [PATCH v4 00/13] ARM: Add Rockchip RV1126 support
In reply to Jagan TekiQuoted 9 lines · Jagan Teki
RV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application.
It is based on quad-core ARM Cortex-A7 32-bit core which integrates NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16 hybrid operation and computing power is up to 2.0TOPs.
[...]
Applied, thanks!
[02/13] clk: rockchip: Add MUXTBL variant
commit: 30d8b7d43c840f5907c0e688d41093f176ba8ac1
[06/13] dt-bindings: soc: rockchip: Document RV1126 grf
commit: 26d8b279392ca93d9b725a3a05f6058db514b244
[07/13] dt-bindings: soc: rockchip: Document RV1126 pmugrf
commit: 614ce48b63c80ddfb627c21f936675a702498528Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>