ARM: dts: at91: Add info on SAMA5D3-EDS
Subsystems (3)
PATCH v7 1/2 ARM: dts: at91: Add info on SAMA5D3-EDS
Adding the SAMA5D3-EDS board from Microchip into the atmel AT91 board description yaml file.
---v6->v7:
- Moved the placement of the Microchip SAMA5D3-EDS entry within the file.v5->v6:
- No code change - patch prefix naming modified to match with others.v4->v5:
- No changev3->v4:
- No changev2->v3:
- No changev1->v2:
- Added Device Tree documentation for Microchip SAMA5D3-EDS board
--- Documentation/devicetree/bindings/arm/atmel-at91.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/atmel-at91.yaml +7 -0
@@ -127,6 +127,13 @@ properties: - const: atmel,sama5d3 - const: atmel,sama5 + - description: Microchip SAMA5D3 Ethernet Development System Board + items: + - const: microchip,sama5d3-eds + - const: atmel,sama5d36 + - const: atmel,sama5d3 + - const: atmel,sama5 + - description: CalAmp LMU5000 board items: - const: calamp,lmu5000
Signature · 1 line
2.17.1
PATCH v7 2/2 ARM: dts: at91: Add SAMA5D3-EDS Board
The SAMA5D3-EDS board is an Ethernet Development Platform allowing for evaluating many Microchip ethernet switch and PHY products. Various daughter cards can connect via an RGMII connector or an RMII connector.
The EDS board is not intended for stand-alone use and has no ethernet capabilities when no daughter board is connected. As such, this device tree is intended to be used with a DT overlay defining the add-on board. To better ensure consistency, some items are defined here as a form of documentation so that all add-on overlays will use the same terms.
---v6->v7:
- Renamed regulators, making things more consistent.
- Made slow_xtal and main_xtal entries direct overrides.v5->v6:
- Replaced underscores in names where I can, improving naming.v4->v5:
- patch now applies to v6.0-rc2v3->v4:
- Fixed regulators as necessary to get the board to boot from SD Card.v2->v3:
- Alphabetized pinctrl entries.
- cleaned up a warning in the regulators section.
- License tweaked to 'OR MIT'
- Included Makefile changev1->v2:
- Modified the compatible field in the device tree to reflect Microchip Ethernet Development System Board.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sama5d3_eds.dts | 307 +++++++++++++++++++++++++ 2 files changed, 308 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sama5d3_eds.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -61,6 +61,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_icp.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ + at91-sama5d3_eds.dtb \ at91-sama5d3_ksz9477_evb.dtb \ at91-sama5d3_xplained.dtb \ at91-dvk_som60.dtb \
arch/arm/boot/dts/at91-sama5d3_eds.dts new file +307 -0
307 lines not on this page · raw message
Signature · 1 line
2.17.1