arm: dts: imx8mp-venice-gw74xx: update M2 gpio hogs
Subsystems (2)
PATCH 1/1 arm: dts: imx8mp-venice-gw74xx: update M2 gpio hogs
Update the M2 socket gpio hogs such that they are not active on boot by flagging them as GPIO_ACTIVE_HIGH so that 'output-high' drives high.
Signed-off-by Tim Harvey <[email protected]>
--- arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +4 -4
@@ -86,21 +86,21 @@ m2_dis2_hog { gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; + gpios = <0 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_gdis#"; }; m2rst_hog { gpio-hog; - gpios = <6 GPIO_ACTIVE_LOW>; + gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_rst#"; }; m2_off_hog { gpio-hog; - gpios = <14 GPIO_ACTIVE_LOW>; + gpios = <14 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_off#"; };
@@ -111,7 +111,7 @@ m2_dis1_hog { gpio-hog; - gpios = <18 GPIO_ACTIVE_LOW>; + gpios = <18 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_wdis#"; };
Signature · 1 line
2.25.1
PATCH 1/1 arm: dts: imx8mp-venice-gw74xx: update M2 gpio hogs
Quoted 3 lines
Update the M2 socket gpio hogs such that they are not active on boot by flagging them as
GPIO_ACTIVE_HIGHso that 'output-high' drives high.Signed-off-by Tim Harvey <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================