Skip to contentSkip to conversation

busybox: add devmem 128-bit support

PATCH In review [email protected] 3 participants 3 messages Sep 14, 2022 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH v2 1/1 busybox: add devmem 128-bit support

From: Mingli Yu <[email protected]>

Add devmem 128-bit support [1].

[1] https://git.busybox.net/busybox/commit/?id=d432049f288c9acdc4a7caa729c68ceba3c5dca1

---
 .../0001-devmem-add-128-bit-width.patch       | 128 ++++++++++++++++++
 meta/recipes-core/busybox/busybox/defconfig   |   2 +-
 meta/recipes-core/busybox/busybox_1.35.0.bb   |   1 +
 3 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-core/busybox/busybox/0001-devmem-add-128-bit-width.patch
meta/recipes-core/busybox/busybox/0001-devmem-add-128-bit-width.patch new file +128 -0
new file mode 100644
index 0000000000..985e2bf1d9
@@ -0,0 +1,128 @@
+From d432049f288c9acdc4a7caa729c68ceba3c5dca1 Mon Sep 17 00:00:00 2001
+From: Aaro Koskinen <[email protected]>
+Date: Thu, 25 Aug 2022 18:47:02 +0300
+Subject: [PATCH] devmem: add 128-bit width
+
+Add 128-bit width if the compiler provides the needed type.
+
+function                                             old     new   delta
+devmem_main                                          405     464     +59
+.rodata                                           109025  109043     +18
+------------------------------------------------------------------------------
+(add/remove: 0/0 grow/shrink: 2/0 up/down: 77/0)               Total: 77 bytes
+
+Upstream-Status: Backport [https://git.busybox.net/busybox/commit/?id=d432049f288c9acdc4a7caa729c68ceba3c5dca1]
+
+Signed-off-by: Aaro Koskinen <[email protected]>
+Signed-off-by: Aaro Koskinen <[email protected]>
+Signed-off-by: Denys Vlasenko <[email protected]>
+Signed-off-by: Mingli Yu <[email protected]>
+---
+ miscutils/devmem.c | 68 ++++++++++++++++++++++++++++++----------------
+ 1 file changed, 44 insertions(+), 24 deletions(-)
+
+diff --git a/miscutils/devmem.c b/miscutils/devmem.c
+index f9f0276bc..f21621bd6 100644
+--- a/miscutils/devmem.c
++++ b/miscutils/devmem.c
+@@ -29,7 +29,6 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ {
+ 	void *map_base, *virt_addr;
+ 	uint64_t read_result;
+-	uint64_t writeval = writeval; /* for compiler */
+ 	off_t target;
+ 	unsigned page_size, mapped_size, offset_in_page;
+ 	int fd;
+@@ -64,9 +63,6 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ 			width = strchrnul(bhwl, (argv[2][0] | 0x20)) - bhwl;
+ 			width = sizes[width];
+ 		}
+-		/* VALUE */
+-		if (argv[3])
+-			writeval = bb_strtoull(argv[3], NULL, 0);
+ 	} else { /* argv[2] == NULL */
+ 		/* make argv[3] to be a valid thing to fetch */
+ 		argv--;
+@@ -96,28 +92,46 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ 	virt_addr = (char*)map_base + offset_in_page;
+ 
+ 	if (!argv[3]) {
+-		switch (width) {
+-		case 8:
+-			read_result = *(volatile uint8_t*)virt_addr;
+-			break;
+-		case 16:
+-			read_result = *(volatile uint16_t*)virt_addr;
+-			break;
+-		case 32:
+-			read_result = *(volatile uint32_t*)virt_addr;
+-			break;
+-		case 64:
+-			read_result = *(volatile uint64_t*)virt_addr;
+-			break;
+-		default:
+-			bb_simple_error_msg_and_die("bad width");
++#ifdef __SIZEOF_INT128__
++		if (width == 128) {
++			unsigned __int128 rd =
++				*(volatile unsigned __int128 *)virt_addr;
++			printf("0x%016llX%016llX\n",
++				(unsigned long long)(uint64_t)(rd >> 64),
++				(unsigned long long)(uint64_t)rd
++			);
++		} else
++#endif
++		{
++			switch (width) {
++			case 8:
++				read_result = *(volatile uint8_t*)virt_addr;
++				break;
++			case 16:
++				read_result = *(volatile uint16_t*)virt_addr;
++				break;
++			case 32:
++				read_result = *(volatile uint32_t*)virt_addr;
++				break;
++			case 64:
++				read_result = *(volatile uint64_t*)virt_addr;
++				break;
++			default:
++				bb_simple_error_msg_and_die("bad width");
++			}
++//			printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n",
++//				target, virt_addr,
++//				(unsigned long long)read_result);
++			/* Zero-padded output shows the width of access just done */
++			printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result);
+ 		}
+-//		printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n",
+-//			target, virt_addr,
+-//			(unsigned long long)read_result);
+-		/* Zero-padded output shows the width of access just done */
+-		printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result);
+ 	} else {
++		/* parse VALUE */
++#ifdef __SIZEOF_INT128__
++		unsigned __int128 writeval = strtoumax(argv[3], NULL, 0);
++#else
++		uint64_t writeval = bb_strtoull(argv[3], NULL, 0);
++#endif
+ 		switch (width) {
+ 		case 8:
+ 			*(volatile uint8_t*)virt_addr = writeval;
+@@ -135,6 +149,12 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ 			*(volatile uint64_t*)virt_addr = writeval;
+ //			read_result = *(volatile uint64_t*)virt_addr;
+ 			break;
++#ifdef __SIZEOF_INT128__
++		case 128:
++			*(volatile unsigned __int128 *)virt_addr = writeval;
++//			read_result = *(volatile uint64_t*)virt_addr;
++			break;
++#endif
+ 		default:
+ 			bb_simple_error_msg_and_die("bad width");
+ 		}
+-- 
+2.25.1
+
meta/recipes-core/busybox/busybox/defconfig +1 -1
index 5e1e1f5638..58d393ad87 100644
@@ -782,7 +782,7 @@ CONFIG_FEATURE_CROND_DIR=""
 # CONFIG_DEVFSD_FG_NP is not set
 # CONFIG_DEVFSD_VERBOSE is not set
 # CONFIG_FEATURE_DEVFS is not set
-# CONFIG_DEVMEM is not set
+CONFIG_DEVMEM=y
 # CONFIG_FBSPLASH is not set
 # CONFIG_FLASH_ERASEALL is not set
 # CONFIG_FLASH_LOCK is not set
meta/recipes-core/busybox/busybox_1.35.0.bb +1 -0
index edf896485e..e9ca6fdb1a 100644
@@ -50,6 +50,7 @@ SRC_URI = "https://busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
            file://0001-libbb-sockaddr2str-ensure-only-printable-characters-.patch \
            file://0002-nslookup-sanitize-all-printed-strings-with-printable.patch \
            file://CVE-2022-30065.patch \
+           file://0001-devmem-add-128-bit-width.patch \
            "
 SRC_URI:append:libc-musl = " file://musl.cfg "
 
Signature · 1 line
2.25.1
#2 lore raw
Quoted 3 lines · Mingli

From: Mingli Yu<[email protected]>

Add devmem 128-bit support [1].

We should merge to master as well but I don't think we need to enable devmem, especially in kirkstone. If a user wants to do that, that's fine.

My notes:

I think that back-porting this commit is low risk since it only adds a new, non-default ability in a compatible manner and more importantly 'devmem' is NOT built by default. Therefore, other users are not affected by including this patch.

devmem is a small program that reads and writes from physical memory using /dev/mem.

Usage is:

$ busybox devmem --help
...
Usage: devmem ADDRESS [WIDTH [VALUE]]
Read/write from physical address
    ADDRESS    Address to act upon
    WIDTH    Width (8/16/...)
    VALUE    Data to be written

This commit adds 128 bit as a supported WIDTH.

The patch cherry-picks back to 1.35.0 *cleanly* and doesn't require pulling in any other commits.
It *does add new functionality* but the patch is written such that if _/SIZEOF_INT128/_ isn't define, the code is practically unchanged.

There hasn't been a release of busybox since Dec 2021 so we should backport this patch to oe-core/master and oe-core/kirkstone.

Quoted 150 lines

[1]https://git.busybox.net/busybox/commit/?id=d432049f288c9acdc4a7caa729c68ceba3c5dca1

---
  .../0001-devmem-add-128-bit-width.patch       | 128 ++++++++++++++++++
  meta/recipes-core/busybox/busybox/defconfig   |   2 +-
  meta/recipes-core/busybox/busybox_1.35.0.bb   |   1 +
  3 files changed, 130 insertions(+), 1 deletion(-)

create mode 100644 meta/recipes-core/busybox/busybox/0001-devmem-add-128-bit-width.patch

meta/recipes-core/busybox/busybox/0001-devmem-add-128-bit-width.patch new file +128 -0
new file mode 100644
index 0000000000..985e2bf1d9
@@ -0,0 +1,128 @@
+From d432049f288c9acdc4a7caa729c68ceba3c5dca1 Mon Sep 17 00:00:00 2001
+From: Aaro Koskinen<[email protected]>
+Date: Thu, 25 Aug 2022 18:47:02 +0300
+Subject: [PATCH] devmem: add 128-bit width
+
+Add 128-bit width if the compiler provides the needed type.
+
+function                                             old     new   delta
+devmem_main                                          405     464     +59
+.rodata                                           109025  109043     +18
+------------------------------------------------------------------------------
+(add/remove: 0/0 grow/shrink: 2/0 up/down: 77/0)               Total: 77 bytes
+
+Upstream-Status: Backport [https://git.busybox.net/busybox/commit/?id=d432049f288c9acdc4a7caa729c68ceba3c5dca1]
+
+Signed-off-by: Aaro Koskinen<[email protected]>
+Signed-off-by: Aaro Koskinen<[email protected]>
+Signed-off-by: Denys Vlasenko<[email protected]>
+Signed-off-by: Mingli Yu<[email protected]>
+---
+ miscutils/devmem.c | 68 ++++++++++++++++++++++++++++++----------------
+ 1 file changed, 44 insertions(+), 24 deletions(-)
+
+diff --git a/miscutils/devmem.c b/miscutils/devmem.c
+index f9f0276bc..f21621bd6 100644
+--- a/miscutils/devmem.c
++++ b/miscutils/devmem.c
+@@ -29,7 +29,6 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ {
+ 	void *map_base, *virt_addr;
+ 	uint64_t read_result;
+-	uint64_t writeval = writeval; /* for compiler */
+ 	off_t target;
+ 	unsigned page_size, mapped_size, offset_in_page;
+ 	int fd;
+@@ -64,9 +63,6 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ 			width = strchrnul(bhwl, (argv[2][0] | 0x20)) - bhwl;
+ 			width = sizes[width];
+ 		}
+-		/* VALUE */
+-		if (argv[3])
+-			writeval = bb_strtoull(argv[3], NULL, 0);
+ 	} else { /* argv[2] == NULL */
+ 		/* make argv[3] to be a valid thing to fetch */
+ 		argv--;
+@@ -96,28 +92,46 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ 	virt_addr = (char*)map_base + offset_in_page;
+
+ 	if (!argv[3]) {
+-		switch (width) {
+-		case 8:
+-			read_result = *(volatile uint8_t*)virt_addr;
+-			break;
+-		case 16:
+-			read_result = *(volatile uint16_t*)virt_addr;
+-			break;
+-		case 32:
+-			read_result = *(volatile uint32_t*)virt_addr;
+-			break;
+-		case 64:
+-			read_result = *(volatile uint64_t*)virt_addr;
+-			break;
+-		default:
+-			bb_simple_error_msg_and_die("bad width");
++#ifdef __SIZEOF_INT128__
++		if (width == 128) {
++			unsigned __int128 rd =
++				*(volatile unsigned __int128 *)virt_addr;
++			printf("0x%016llX%016llX\n",
++				(unsigned long long)(uint64_t)(rd >> 64),
++				(unsigned long long)(uint64_t)rd
++			);
++		} else
++#endif
++		{
++			switch (width) {
++			case 8:
++				read_result = *(volatile uint8_t*)virt_addr;
++				break;
++			case 16:
++				read_result = *(volatile uint16_t*)virt_addr;
++				break;
++			case 32:
++				read_result = *(volatile uint32_t*)virt_addr;
++				break;
++			case 64:
++				read_result = *(volatile uint64_t*)virt_addr;
++				break;
++			default:
++				bb_simple_error_msg_and_die("bad width");
++			}
++//			printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n",
++//				target, virt_addr,
++//				(unsigned long long)read_result);
++			/* Zero-padded output shows the width of access just done */
++			printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result);
+ 		}
+-//		printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n",
+-//			target, virt_addr,
+-//			(unsigned long long)read_result);
+-		/* Zero-padded output shows the width of access just done */
+-		printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result);
+ 	} else {
++		/* parse VALUE */
++#ifdef __SIZEOF_INT128__
++		unsigned __int128 writeval = strtoumax(argv[3], NULL, 0);
++#else
++		uint64_t writeval = bb_strtoull(argv[3], NULL, 0);
++#endif
+ 		switch (width) {
+ 		case 8:
+ 			*(volatile uint8_t*)virt_addr = writeval;
+@@ -135,6 +149,12 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ 			*(volatile uint64_t*)virt_addr = writeval;
+ //			read_result = *(volatile uint64_t*)virt_addr;
+ 			break;
++#ifdef __SIZEOF_INT128__
++		case 128:
++			*(volatile unsigned __int128 *)virt_addr = writeval;
++//			read_result = *(volatile uint64_t*)virt_addr;
++			break;
++#endif
+ 		default:
+ 			bb_simple_error_msg_and_die("bad width");
+ 		}
+--
+2.25.1
+
meta/recipes-core/busybox/busybox/defconfig +0 -0
index 5e1e1f5638..58d393ad87 100644

meta/recipes-core/busybox/busybox/defconfig CONFIG_FEATURE_CROND_DIR="" · line 785

Quoted 5 lines
meta/recipes-core/busybox/busybox/defconfig +1 -1
@@ -782,7 +782,7 @@ CONFIG_FEATURE_CROND_DIR=""
  # CONFIG_DEVFSD_FG_NP is not set
  # CONFIG_DEVFSD_VERBOSE is not set
  # CONFIG_FEATURE_DEVFS is not set
-# CONFIG_DEVMEM is not set
+CONFIG_DEVMEM=y

As mentioned above, I don't think we need to enable DEVMEM but only

carry this small patch.

Thanks,

../Randy

Quoted 20 lines
meta/recipes-core/busybox/busybox/defconfig +0 -0
  # CONFIG_FBSPLASH is not set
  # CONFIG_FLASH_ERASEALL is not set
  # CONFIG_FLASH_LOCK is not set
meta/recipes-core/busybox/busybox_1.35.0.bb +0 -0
index edf896485e..e9ca6fdb1a 100644
@@ -50,6 +50,7 @@ SRC_URI ="https://busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \ 

file://0001-libbb-sockaddr2str-ensure-only-printable-characters-.patch \ file://0002-nslookup-sanitize-all-printed-strings-with-printable.patch \ file://CVE-2022-30065.patch \ + file://0001-devmem-add-128-bit-width.patch \ "
SRC_URI:append:libc-musl =" file://musl.cfg "

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#170637):https://lists.openembedded.org/g/openembedded-core/message/170637 Mute This Topic:https://lists.openembedded.org/mt/93673250/3616765
Group Owner:[email protected] Unsubscribe:https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 2 lines
# Randy MacLeod
# Wind River Linux
#3 lore raw
Quoted 9 lines · Randy MacLeod

On 2022-09-14 03:20, Yu, Mingli wrote:

From: Mingli Yu <[email protected]>

Add devmem 128-bit support [1].

We should merge to master as well but I don't think we need to enable devmem, especially in kirkstone. If a user wants to do that, that's fine.

IIf this is also suitable for master, then the patch should be resubmitted for master and I can then cherry-pick to kirkstone.

Steve

Quoted 226 lines

My notes:

I think that back-porting this commit is low risk since it only adds a new, non-default ability in a compatible manner and more importantly 'devmem' is NOT built by default. Therefore, other users are not affected by including this patch.

devmem is a small program that reads and writes from physical memory using /dev/mem.

Usage is:

$ busybox devmem --help
...
Usage: devmem ADDRESS [WIDTH [VALUE]]
Read/write from physical address
    ADDRESS    Address to act upon
    WIDTH    Width (8/16/...)
    VALUE    Data to be written

This commit adds 128 bit as a supported WIDTH.

The patch cherry-picks back to 1.35.0 cleanly and doesn't require pulling in any other commits.
It does add new functionality but the patch is written such that if _SIZEOF_INT128_ isn't define, the code is practically unchanged.

There hasn't been a release of busybox since Dec 2021 so we should backport this patch to oe-core/master and oe-core/kirkstone.

[1] https://git.busybox.net/busybox/commit/?id=d432049f288c9acdc4a7caa729c68ceba3c5dca1

---
 .../0001-devmem-add-128-bit-width.patch       | 128 ++++++++++++++++++
 meta/recipes-core/busybox/busybox/defconfig   |   2 +-
 meta/recipes-core/busybox/busybox_1.35.0.bb   |   1 +
 3 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-core/busybox/busybox/0001-devmem-add-128-bit-width.patch
meta/recipes-core/busybox/busybox/0001-devmem-add-128-bit-width.patch new file +128 -0
new file mode 100644
index 0000000000..985e2bf1d9
@@ -0,0 +1,128 @@
+From d432049f288c9acdc4a7caa729c68ceba3c5dca1 Mon Sep 17 00:00:00 2001
+From: Aaro Koskinen <[email protected]>
+Date: Thu, 25 Aug 2022 18:47:02 +0300
+Subject: [PATCH] devmem: add 128-bit width
+
+Add 128-bit width if the compiler provides the needed type.
+
+function                                             old     new   delta
+devmem_main                                          405     464     +59
+.rodata                                           109025  109043     +18
+------------------------------------------------------------------------------
+(add/remove: 0/0 grow/shrink: 2/0 up/down: 77/0)               Total: 77 bytes
+
+Upstream-Status: Backport [https://git.busybox.net/busybox/commit/?id=d432049f288c9acdc4a7caa729c68ceba3c5dca1]
+
+Signed-off-by: Aaro Koskinen <[email protected]>
+Signed-off-by: Aaro Koskinen <[email protected]>
+Signed-off-by: Denys Vlasenko <[email protected]>
+Signed-off-by: Mingli Yu <[email protected]>
+---
+ miscutils/devmem.c | 68 ++++++++++++++++++++++++++++++----------------
+ 1 file changed, 44 insertions(+), 24 deletions(-)
+
+diff --git a/miscutils/devmem.c b/miscutils/devmem.c
+index f9f0276bc..f21621bd6 100644
+--- a/miscutils/devmem.c
++++ b/miscutils/devmem.c
+@@ -29,7 +29,6 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ {
+ void *map_base, *virt_addr;
+ uint64_t read_result;
+- uint64_t writeval = writeval; /* for compiler */
+ off_t target;
+ unsigned page_size, mapped_size, offset_in_page;
+ int fd;
+@@ -64,9 +63,6 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ width = strchrnul(bhwl, (argv[2][0] | 0x20)) - bhwl;
+ width = sizes[width];
+ }
+- /* VALUE */
+- if (argv[3])
+- writeval = bb_strtoull(argv[3], NULL, 0);
+ } else { /* argv[2] == NULL */
+ /* make argv[3] to be a valid thing to fetch */
+ argv--;
+@@ -96,28 +92,46 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ virt_addr = (char*)map_base + offset_in_page;
+
+ if (!argv[3]) {
+- switch (width) {
+- case 8:
+- read_result = *(volatile uint8_t*)virt_addr;
+- break;
+- case 16:
+- read_result = *(volatile uint16_t*)virt_addr;
+- break;
+- case 32:
+- read_result = *(volatile uint32_t*)virt_addr;
+- break;
+- case 64:
+- read_result = *(volatile uint64_t*)virt_addr;
+- break;
+- default:
+- bb_simple_error_msg_and_die("bad width");
++#ifdef __SIZEOF_INT128__
++ if (width == 128) {
++ unsigned __int128 rd =
++ *(volatile unsigned __int128 *)virt_addr;
++ printf("0x%016llX%016llX\n",
++ (unsigned long long)(uint64_t)(rd >> 64),
++ (unsigned long long)(uint64_t)rd
++ );
++ } else
++#endif
++ {
++ switch (width) {
++ case 8:
++ read_result = *(volatile uint8_t*)virt_addr;
++ break;
++ case 16:
++ read_result = *(volatile uint16_t*)virt_addr;
++ break;
++ case 32:
++ read_result = *(volatile uint32_t*)virt_addr;
++ break;
++ case 64:
++ read_result = *(volatile uint64_t*)virt_addr;
++ break;
++ default:
++ bb_simple_error_msg_and_die("bad width");
++ }
++// printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n",
++// target, virt_addr,
++// (unsigned long long)read_result);
++ /* Zero-padded output shows the width of access just done */
++ printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result);
+ }
+-// printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n",
+-// target, virt_addr,
+-// (unsigned long long)read_result);
+- /* Zero-padded output shows the width of access just done */
+- printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result);
+ } else {
++ /* parse VALUE */
++#ifdef __SIZEOF_INT128__
++ unsigned __int128 writeval = strtoumax(argv[3], NULL, 0);
++#else
++ uint64_t writeval = bb_strtoull(argv[3], NULL, 0);
++#endif
+ switch (width) {
+ case 8:
+ *(volatile uint8_t*)virt_addr = writeval;
+@@ -135,6 +149,12 @@ int devmem_main(int argc UNUSED_PARAM, char **argv)
+ *(volatile uint64_t*)virt_addr = writeval;
+ // read_result = *(volatile uint64_t*)virt_addr;
+ break;
++#ifdef __SIZEOF_INT128__
++ case 128:
++ *(volatile unsigned __int128 *)virt_addr = writeval;
++// read_result = *(volatile uint64_t*)virt_addr;
++ break;
++#endif
+ default:
+ bb_simple_error_msg_and_die("bad width");
+ }
+--
+2.25.1
+
meta/recipes-core/busybox/busybox/defconfig +1 -1
index 5e1e1f5638..58d393ad87 100644
@@ -782,7 +782,7 @@ CONFIG_FEATURE_CROND_DIR=""
 # CONFIG_DEVFSD_FG_NP is not set
 # CONFIG_DEVFSD_VERBOSE is not set
 # CONFIG_FEATURE_DEVFS is not set
-# CONFIG_DEVMEM is not set
+CONFIG_DEVMEM=y
 

As mentioned above, I don't think we need to enable DEVMEM but only

carry this small patch.

Thanks,

../Randy

# CONFIG_FBSPLASH is not set
# CONFIG_FLASH_ERASEALL is not set
# CONFIG_FLASH_LOCK is not set

meta/recipes-core/busybox/busybox_1.35.0.bb +1 -1
index edf896485e..e9ca6fdb1a 100644
@@ -50,6 +50,7 @@ SRC_URI = "https://busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
            file://0001-libbb-sockaddr2str-ensure-only-printable-characters-.patch \
            file://0002-nslookup-sanitize-all-printed-strings-with-printable.patch \
            file://CVE-2022-30065.patch \
+           file://0001-devmem-add-128-bit-width.patch \
            "
 SRC_URI:append:libc-musl = " file://musl.cfg "
 
 
 
 
 
--

# Randy MacLeod
# Wind River Linux

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#170658): https://lists.openembedded.org/g/openembedded-core/message/170658
Mute This Topic: https://lists.openembedded.org/mt/93673250/3617601
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-