arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
PATCH 1/1 arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
The size of the UFS PHY serdes register region is 0x1c8 and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx).
--- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/sc8280xp.dtsi +2 -2
@@ -1432,7 +1432,7 @@ ufs_mem_hc: ufs@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges;
@@ -1500,7 +1500,7 @@ ufs_card_hc: ufs@1da4000 { ufs_card_phy: phy@1da7000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01da7000 0 0xe10>; + reg = <0 0x01da7000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges;
Signature · 1 line
2.35.1
Quoted 6 lines · Johan Hovold
The size of the UFS PHY serdes register region is
0x1c8and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx).Fixes 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")Signed-off-by Johan Hovold <[email protected]>
Quoted 29 lines
--- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/qcom/sc8280xp.dtsi +2
-2@@ -1432,7 +1432,7 @@ ufs_mem_hc: ufs@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0xe10>; + reg = <0 0x01d87000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges;@@ -1500,7 +1500,7 @@ ufs_card_hc: ufs@1da4000 { ufs_card_phy: phy@1da7000 { compatible = "qcom,sc8280xp-qmp-ufs-phy"; - reg = <0 0x01da7000 0 0xe10>; + reg = <0 0x01da7000 0 0x1c8>; #address-cells = <2>; #size-cells = <2>; ranges;Signature · 1 line
2.35.1
Quoted 9 lines · Bjorn Andersson
Quoted 6 lines · Johan Hovold
The size of the UFS PHY serdes register region is
0x1c8and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx).Fixes 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")Signed-off-by Johan Hovold <[email protected]>Reviewed-by Bjorn Andersson <[email protected]>
I can't seem to find this one in either the arm64-for-6.1 or fixes branch for 6.0. Did you just forget to push it?
Johan
Quoted 6 lines · Johan Hovold
The size of the UFS PHY serdes register region is
0x1c8and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx).Fixes 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")Signed-off-by Johan Hovold <[email protected]>
This fixes an issue that I'm seeing on the QDrive3 in next-20220930.
Andrew Halaney
Tested-byQuoted 5 lines · Brian Masney
Quoted 4 lines · Johan Hovold
The size of the UFS PHY serdes register region is
0x1c8and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx).
Quoted 7 lines
Quoted 2 lines
Fixes 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")Signed-off-by Johan Hovold <[email protected]>This fixes an issue that I'm seeing on the QDrive3 in next-20220930.
Reviewed-by Brian Masney <[email protected]>
Quoted 5 lines · Johan Hovold
The size of the UFS PHY serdes register region is
0x1c8and the corresponding 'reg' property should specifically not include the adjacent regions that are defined in the child node (e.g. tx and rx).
Applied, thanks!
[1/1] arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
commit: 8703d55bd5eac642275fe91b34ac62ad0ad312b5
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>