Add dp-intf and dp nodes
Subsystems (2)
v3 cover Add dp-intf and dp nodes
This series add MediaTek dp-intf nodes and dp nodes. This series is based on linux-next-20220915.
Changes for v3:
1. Update commit message for "arm64: dts: mediatek: cherry: Add edptx and dptx support".
Changes for v2:
1. Update commit messages.
2. reorder the place of "status = "disabled";"
3. reorder the place of dp-intf.
Bo-Chen Chen (4):
arm64: dts: mt8195: Add dp-intf nodes
arm64: dts: mt8195: Add edptx and dptx nodes
arm64: dts: mediatek: cherry: Add dp-intf ports
arm64: dts: mediatek: cherry: Add edptx and dptx support
.../boot/dts/mediatek/mt8195-cherry.dtsi | 86 +++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 48 +++++++++++ 2 files changed, 134 insertions(+)
Signature · 1 line
2.18.0
PATCH v3 1/4 arm64: dts: mt8195: Add dp-intf nodes
Dp-intfs provide the pixel data to edptx and dptx. To support edptx and dptx, we need to add dp-intf0 and dp-intf1 nodes.
Dp-intf0 is for edptx and dp-intf1 is for dptx.
--- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195.dtsi +23 -0
@@ -2067,6 +2067,17 @@ mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>; }; + dp_intf0: dp-intf@1c015000 { + compatible = "mediatek,mt8195-dp-intf"; + reg = <0 0x1c015000 0 0x1000>; + interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys0 CLK_VDO0_DP_INTF0>, + <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>, + <&apmixedsys CLK_APMIXED_TVDPLL1>; + clock-names = "engine", "pixel", "pll"; + status = "disabled"; + }; + mutex: mutex@1c016000 { compatible = "mediatek,mt8195-disp-mutex"; reg = <0 0x1c016000 0 0x1000>;
@@ -2155,5 +2166,17 @@ clock-names = "apb", "smi", "gals"; power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; }; + + dp_intf1: dp-intf@1c113000 { + compatible = "mediatek,mt8195-dp-intf"; + reg = <0 0x1c113000 0 0x1000>; + interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>, + <&vdosys1 CLK_VDO1_DPINTF>, + <&apmixedsys CLK_APMIXED_TVDPLL2>; + clock-names = "engine", "pixel", "pll"; + status = "disabled"; + }; }; };
Signature · 1 line
2.18.0
PATCH v3 2/4 arm64: dts: mt8195: Add edptx and dptx nodes
In reply to Bo-Chen ChenIn MT8195, we use edptx as the internal display interface and use dptx as the external display interface. Therefore, we need to add these nodes to support the internal display and the external display.
- Add dp calibration data in the efuse node.
- Add edptx and dptx nodes for MT8195.
--- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 25 ++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195.dtsi +25 -0
@@ -1241,6 +1241,9 @@ reg = <0x189 0x2>; bits = <7 5>; }; + dp_calibration: dp-data@1ac { + reg = <0x1ac 0x10>; + }; }; u3phy2: t-phy@11c40000 {
@@ -2178,5 +2181,27 @@ clock-names = "engine", "pixel", "pll"; status = "disabled"; }; + + edp_tx: edp-tx@1c500000 { + compatible = "mediatek,mt8195-edp-tx"; + reg = <0 0x1c500000 0 0x8000>; + nvmem-cells = <&dp_calibration>; + nvmem-cell-names = "dp_calibration_data"; + power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>; + interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + status = "disabled"; + }; + + dp_tx: dp-tx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0 0x1c600000 0 0x8000>; + nvmem-cells = <&dp_calibration>; + nvmem-cell-names = "dp_calibration_data"; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + status = "disabled"; + }; }; };
Signature · 1 line
2.18.0
PATCH v3 3/4 arm64: dts: mediatek: cherry: Add dp-intf ports
In reply to Bo-Chen ChenDp-intfs provide the pixel data to edptx and dptx. To support edptx and dptx, we need to add dp-intf0 and dp-intf1 ports.
--- .../arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +18 -0
@@ -120,6 +120,24 @@ }; }; +&dp_intf0 { + status = "okay"; + + port { + dp_intf0_out: endpoint { + }; + }; +}; + +&dp_intf1 { + status = "okay"; + + port { + dp_intf1_out: endpoint { + }; + }; +}; + &i2c0 { status = "okay";
Signature · 1 line
2.18.0
PATCH v3 4/4 arm64: dts: mediatek: cherry: Add edptx and dptx support
In reply to Bo-Chen ChenIn cherry projects, we use edptx as the internal display interface and use dptx as the external display interface. To support this, we need to add more properties.
- Add pinctrls for edptx and dptx.
- Add ports for edptx and dptx.
The port connections for the internal and external display:
dp-intf0 -> edptx -> panel
dp-intf1 -> dptx
The edptx endpoint is kept empty for now, as the panel addition will come in a later commit.
--- .../boot/dts/mediatek/mt8195-cherry.dtsi | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +68 -0
@@ -125,6 +125,7 @@ port { dp_intf0_out: endpoint { + remote-endpoint = <&edp_in>; }; }; };
@@ -134,6 +135,59 @@ port { dp_intf1_out: endpoint { + remote-endpoint = <&dptx_in>; + }; + }; +}; + +&edp_tx { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edptx_pins_default>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + edp_out: endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dp_tx { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dptx_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dptx_in: endpoint { + remote-endpoint = <&dp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dptx_out: endpoint { + data-lanes = <0 1 2 3>; + }; }; }; };
@@ -497,6 +551,20 @@ }; }; + edptx_pins_default: edptx-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>; + bias-pull-up; + }; + }; + + dptx_pin: dptx-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>; + bias-pull-up; + }; + }; + i2c0_pins: i2c0-default-pins { pins-bus { pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
Signature · 1 line
2.18.0