bootcount: pmic: Correct misleading comment
PATCH 1/1 bootcount: pmic: Correct misleading comment
Fix a copy-paste error I did when inserting the comment.
Signed-off-by Philip Oberfichtner <[email protected]>
---
drivers/bootcount/Kconfig | 2 +- drivers/bootcount/pmic_pfuze100.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/bootcount/Kconfig +1 -1
@@ -132,7 +132,7 @@ config DM_BOOTCOUNT_PMIC_PFUZE100 depends on DM_PMIC_PFUZE100 help Enable support for the bootcounter using PMIC PFUZE100 registers. - This works only, if the PMIC is not connected. + This works only, if the PMIC is not connected to a battery. config DM_BOOTCOUNT_SPI_FLASH bool "Support SPI flash devices as a backing store for bootcount"
drivers/bootcount/pmic_pfuze100.c +1 -1
@@ -5,7 +5,7 @@* Philip Oberfichtner <[email protected]> * * A bootcount driver using the registers MEMA - MEMD on the PFUZE100. -* This works only, if the PMIC is not connected. +* This works only, if the PMIC is not connected to a battery. */ #include <common.h>
Signature · 1 line
2.37.2
Quoted 3 lines · Philip Oberfichtner
Fix a copy-paste error I did when inserting the comment.
Signed-off-by Philip Oberfichtner <[email protected]>
Reviewed-by Jaehoon Chung <[email protected]>
Best Regards,
Jaehoon Chung
Quoted 33 lines
---
drivers/bootcount/Kconfig | 2 +- drivers/bootcount/pmic_pfuze100.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)drivers/bootcount/Kconfig +1
-1@@ -132,7 +132,7 @@ config DM_BOOTCOUNT_PMIC_PFUZE100 depends on DM_PMIC_PFUZE100 help Enable support for the bootcounter using PMIC PFUZE100 registers. - This works only, if the PMIC is not connected. + This works only, if the PMIC is not connected to a battery. config DM_BOOTCOUNT_SPI_FLASH bool "Support SPI flash devices as a backing store for bootcount"drivers/bootcount/pmic_pfuze100.c +1
-1@@ -5,7 +5,7 @@* Philip Oberfichtner <[email protected]> * * A bootcount driver using the registers MEMA - MEMD on the PFUZE100. -* This works only, if the PMIC is not connected. +* This works only, if the PMIC is not connected to a battery. */ #include <common.h>
Quoted 4 lines · Philip Oberfichtner
Fix a copy-paste error I did when inserting the comment.
Signed-off-by Philip Oberfichtner <[email protected]>Reviewed-by Jaehoon Chung <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom