media: i2c: imx334: support lower bandwidth mode
PATCH v4 1/1 media: i2c: imx334: support lower bandwidth mode
From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080 resolutions while leaving the existing configuration as default
---
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format fails
V2 -> V3
- Fixed the warning reported by kernel test robot
V1 -> V2
- Addressed the review comment given by Jacopo Mondi, Which has bug in imx334_enum_frame_size() loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first
--- drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- 1 file changed, 276 insertions(+), 26 deletions(-)
drivers/media/i2c/imx334.c +276 -26
@@ -79,7 +79,6 @@ struct imx334_reg_list {* struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height -* @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines
@@ -91,7 +90,6 @@ struct imx334_reg_list {struct imx334_mode {u32 width;u32 height; -u32 code;u32 hblank;u32 vblank;u32 vblank_min;
@@ -119,6 +117,7 @@ struct imx334_mode {* @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls +* @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 {
@@ -140,6 +139,7 @@ struct imx334 {u32 vblank;const struct imx334_mode *cur_mode;struct mutex mutex; +u32 cur_code;bool streaming; };
@@ -147,6 +147,169 @@ static const s64 link_freq[] = { IMX334_LINK_FREQ, }; +/* Sensor mode registers */ +static const struct imx334_reg mode_1920x1080_regs[] = { + {0x3000 ,0x01 }, + {0x3018 ,0x04 }, + {0x3030 ,0xCA }, + {0x3031 ,0x08 }, + {0x3032 ,0x00 }, + {0x3034 ,0x4C }, + {0x3035 ,0x04 }, + {0x302C ,0xF0 }, + {0x302D ,0x03 }, + {0x302E ,0x80 }, + {0x302F ,0x07 }, + {0x3074 ,0xCC }, + {0x3075 ,0x02 }, + {0x308E ,0xCD }, + {0x308F ,0x02 }, + {0x3076 ,0x38 }, + {0x3077 ,0x04 }, + {0x3090 ,0x38 }, + {0x3091 ,0x04 }, + {0x3308 ,0x38 }, + {0x3309 ,0x04 }, + {0x30C6 ,0x00 }, + {0x30C7 ,0x00 }, + {0x30CE ,0x00 }, + {0x30CF ,0x00 }, + {0x30D8 ,0x18 }, + {0x30D9 ,0x0A }, + {0x304C ,0x00 }, + {0x304E ,0x00 }, + {0x304F ,0x00 }, + {0x3050 ,0x00 }, + {0x30B6 ,0x00 }, + {0x30B7 ,0x00 }, + {0x3116 ,0x08 }, + {0x3117 ,0x00 }, + {0x31A0 ,0x20 }, + {0x31A1 ,0x0F }, + {0x300C ,0x3B }, + {0x300D ,0x29 }, + {0x314C ,0x29 }, + {0x314D ,0x01 }, + {0x315A ,0x0A }, + {0x3168 ,0xA0 }, + {0x316A ,0x7E }, + {0x319E ,0x02 }, + {0x3199 ,0x00 }, + {0x319D ,0x00 }, + {0x31DD ,0x03 }, + {0x3300 ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, + {0x3A01 ,0x03 }, + {0x3A18 ,0x7F }, + {0x3A19 ,0x00 }, + {0x3A1A ,0x37 }, + {0x3A1B ,0x00 }, + {0x3A1C ,0x37 }, + {0x3A1D ,0x00 }, + {0x3A1E ,0xF7 }, + {0x3A1F ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x6F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x5F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x2F }, + {0x3A21 ,0x00 }, + {0x3078 ,0x02 }, + {0x3079 ,0x00 }, + {0x307A ,0x00 }, + {0x307B ,0x00 }, + {0x3080 ,0x02 }, + {0x3081 ,0x00 }, + {0x3082 ,0x00 }, + {0x3083 ,0x00 }, + {0x3088 ,0x02 }, + {0x3094 ,0x00 }, + {0x3095 ,0x00 }, + {0x3096 ,0x00 }, + {0x309B ,0x02 }, + {0x309C ,0x00 }, + {0x309D ,0x00 }, + {0x309E ,0x00 }, + {0x30A4 ,0x00 }, + {0x30A5 ,0x00 }, + {0x3288 ,0x21 }, + {0x328A ,0x02 }, + {0x3414 ,0x05 }, + {0x3416 ,0x18 }, + {0x35AC ,0x0E }, + {0x3648 ,0x01 }, + {0x364A ,0x04 }, + {0x364C ,0x04 }, + {0x3678 ,0x01 }, + {0x367C ,0x31 }, + {0x367E ,0x31 }, + {0x3708 ,0x02 }, + {0x3714 ,0x01 }, + {0x3715 ,0x02 }, + {0x3716 ,0x02 }, + {0x3717 ,0x02 }, + {0x371C ,0x3D }, + {0x371D ,0x3F }, + {0x372C ,0x00 }, + {0x372D ,0x00 }, + {0x372E ,0x46 }, + {0x372F ,0x00 }, + {0x3730 ,0x89 }, + {0x3731 ,0x00 }, + {0x3732 ,0x08 }, + {0x3733 ,0x01 }, + {0x3734 ,0xFE }, + {0x3735 ,0x05 }, + {0x375D ,0x00 }, + {0x375E ,0x00 }, + {0x375F ,0x61 }, + {0x3760 ,0x06 }, + {0x3768 ,0x1B }, + {0x3769 ,0x1B }, + {0x376A ,0x1A }, + {0x376B ,0x19 }, + {0x376C ,0x18 }, + {0x376D ,0x14 }, + {0x376E ,0x0F }, + {0x3776 ,0x00 }, + {0x3777 ,0x00 }, + {0x3778 ,0x46 }, + {0x3779 ,0x00 }, + {0x377A ,0x08 }, + {0x377B ,0x01 }, + {0x377C ,0x45 }, + {0x377D ,0x01 }, + {0x377E ,0x23 }, + {0x377F ,0x02 }, + {0x3780 ,0xD9 }, + {0x3781 ,0x03 }, + {0x3782 ,0xF5 }, + {0x3783 ,0x06 }, + {0x3784 ,0xA5 }, + {0x3788 ,0x0F }, + {0x378A ,0xD9 }, + {0x378B ,0x03 }, + {0x378C ,0xEB }, + {0x378D ,0x05 }, + {0x378E ,0x87 }, + {0x378F ,0x06 }, + {0x3790 ,0xF5 }, + {0x3792 ,0x43 }, + {0x3794 ,0x7A }, + {0x3796 ,0xA1 }, + {0x37B0 ,0x37 }, + {0x3E04 ,0x0E }, + {0x30E8 ,0x50 }, + {0x30E9 ,0x00 }, + {0x3E04 ,0x0E }, + {0x3002 ,0x00 }, +}; +/* Sensor mode registers */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000 ,0x01 },
@@ -243,20 +406,56 @@ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3a00, 0x01}, }; +static const struct imx334_reg raw10_framefmt_regs[] = { + {0x3050 ,0x00 }, + {0x319D ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, +}; + +static const struct imx334_reg raw12_framefmt_regs[] = { + {0x3050 ,0x01 }, + {0x319D ,0x01 }, + {0x341C ,0x47 }, + {0x341D ,0x00 }, +}; + +/* +* The supported BUS formats. +*/ +static const u32 imx334_mbus_codes[] = { +MEDIA_BUS_FMT_SRGGB12_1X12 , +MEDIA_BUS_FMT_SRGGB10_1X10 , +}; +/* Supported sensor mode configurations */ -static const struct imx334_mode supported_mode = { - .width =3840 , - .height =2160 , - .hblank =560 , - .vblank =2340 , - .vblank_min =90 , - .vblank_max =132840 , - .pclk =594000000 , - .link_freq_idx =0 , - .code =MEDIA_BUS_FMT_SRGGB12_1X12 , - .reg_list = { - .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), - .regs = mode_3840x2160_regs, +static const struct imx334_mode supported_modes[] = { + { + .width =3840 , + .height =2160 , + .hblank =560 , + .vblank =2340 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), + .regs = mode_3840x2160_regs, + }, + }, { + .width =1920 , + .height =1080 , + .hblank =560 , + .vblank =1170 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_1920x1080_regs), + .regs = mode_1920x1080_regs, + }, }, };
@@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { -if (code->index >0 ) +if (code->index >=ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - code->code = supported_mode.code; + code->code = imx334_mbus_codes[code->index];return 0 ; }
@@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd,struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fsize) { -if (fsize->index >0 ) + unsigned int i; + +if (fsize->index >=ARRAY_SIZE (supported_modes))return -EINVAL ; -if (fsize->code != supported_mode.code) +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); ++i) { +if (imx334_mbus_codes[i] == fsize->code) +break ; + } + +if (i ==ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - fsize->min_width = supported_mode.width; + fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; - fsize->min_height = supported_mode.height; + fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height;return 0 ;
@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = imx334->cur_code; fmt->format.field =V4L2_FIELD_NONE ; fmt->format.colorspace =V4L2_COLORSPACE_RAW ; fmt->format.ycbcr_enc =V4L2_YCBCR_ENC_DEFAULT ;
@@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,return 0 ; } +static int imx334_get_format_code (struct imx334 *imx334,struct v4l2_subdev_format *fmt) +{ +unsigned int i; + +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); i++) { +if (imx334_mbus_codes[i] == fmt->format.code) +break ; + } + +if (i >=ARRAY_SIZE (imx334_mbus_codes)) + i =0 ; + +return imx334_mbus_codes[i]; +} +/** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure
@@ -609,7 +830,13 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,mutex_lock (&imx334->mutex); - mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt); + + mode =v4l2_find_nearest_size (supported_modes, +ARRAY_SIZE (supported_modes), + width, height, + fmt->format.width, fmt->format.height); +imx334_fill_pad_format (imx334, mode, fmt);if (fmt->which ==V4L2_SUBDEV_FORMAT_TRY ) {
@@ -617,7 +844,7 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd, framefmt =v4l2_subdev_get_try_format (sd, sd_state, fmt->pad); *framefmt = fmt->format; - }else { + }else if (imx334->cur_mode != mode) { ret =imx334_update_controls (imx334, mode);if (!ret) imx334->cur_mode = mode;
@@ -642,11 +869,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,struct v4l2_subdev_format fmt = {0 }; fmt.which = sd_state ?V4L2_SUBDEV_FORMAT_TRY :V4L2_SUBDEV_FORMAT_ACTIVE ; -imx334_fill_pad_format (imx334, &supported_mode, &fmt); +imx334_fill_pad_format (imx334, &supported_modes[0 ], &fmt);return imx334_set_pad_format (sd, sd_state, &fmt); } +static int imx334_set_framefmt (struct imx334 *imx334) +{ +switch (imx334->cur_code) { +case MEDIA_BUS_FMT_SRGGB10_1X10 : +return imx334_write_regs (imx334, raw10_framefmt_regs, +ARRAY_SIZE (raw10_framefmt_regs)); + +case MEDIA_BUS_FMT_SRGGB12_1X12 : +return imx334_write_regs (imx334, raw12_framefmt_regs, +ARRAY_SIZE (raw12_framefmt_regs)); + } + +return -EINVAL ; +} +/** * imx334_start_streaming() - Start sensor stream * @imx334: pointer to imx334 device
@@ -667,6 +909,13 @@ static int imx334_start_streaming(struct imx334 *imx334)return ret; } + ret =imx334_set_framefmt (imx334); +if (ret) { +dev_err (imx334->dev,"%s failed to set frame format: %d\n" , + __func__, ret); +return ret; + } +/* Setup handler will write actual exposure and gain */ ret =__v4l2_ctrl_handler_setup (imx334->sd.ctrl_handler);if (ret) {
@@ -1037,7 +1286,8 @@ static int imx334_probe(struct i2c_client *client) }/* Set default mode to max resolution */ - imx334->cur_mode = &supported_mode; + imx334->cur_mode = &supported_modes[0 ]; + imx334->cur_code = imx334_mbus_codes[0 ]; imx334->vblank = imx334->cur_mode->vblank; ret =imx334_init_controls (imx334);
Signature · 1 line
2.17.1
Hi Shravan,
Thanks for the patch.
Quoted 356 lines · shravan kumar
From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080 resolutions while leaving the existing configuration as default
CC Conor Dooley <[email protected]>Signed-off-by Prakash Battu <[email protected]>Signed-off-by Shravan Chippa <[email protected]>---
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format failsV2 -> V3
- Fixed the warning reported by kernel test robotV1 -> V2
- Addressed the review comment given by Jacopo Mondi, Which has bug inimx334_enum_frame_size()loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first--- drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- 1 file changed, 276 insertions(+), 26 deletions(-)drivers/media/i2c/imx334.c +228
-22@@ -79,7 +79,6 @@ struct imx334_reg_list {* struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height -* @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@ struct imx334_reg_list {struct imx334_mode {u32 width;u32 height; -u32 code;u32 hblank;u32 vblank;u32 vblank_min;@@ -119,6 +117,7 @@ struct imx334_mode {* @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls +* @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 {@@ -140,6 +139,7 @@ struct imx334 {u32 vblank;const struct imx334_mode *cur_mode;struct mutex mutex; +u32 cur_code;bool streaming; };@@ -147,6 +147,169 @@ static const s64 link_freq[] = { IMX334_LINK_FREQ, }; +/* Sensor mode registers */ +static const struct imx334_reg mode_1920x1080_regs[] = { + {0x3000 ,0x01 }, + {0x3018 ,0x04 }, + {0x3030 ,0xCA }, + {0x3031 ,0x08 }, + {0x3032 ,0x00 }, + {0x3034 ,0x4C }, + {0x3035 ,0x04 }, + {0x302C ,0xF0 }, + {0x302D ,0x03 }, + {0x302E ,0x80 }, + {0x302F ,0x07 }, + {0x3074 ,0xCC }, + {0x3075 ,0x02 }, + {0x308E ,0xCD }, + {0x308F ,0x02 }, + {0x3076 ,0x38 }, + {0x3077 ,0x04 }, + {0x3090 ,0x38 }, + {0x3091 ,0x04 }, + {0x3308 ,0x38 }, + {0x3309 ,0x04 }, + {0x30C6 ,0x00 }, + {0x30C7 ,0x00 }, + {0x30CE ,0x00 }, + {0x30CF ,0x00 }, + {0x30D8 ,0x18 }, + {0x30D9 ,0x0A }, + {0x304C ,0x00 }, + {0x304E ,0x00 }, + {0x304F ,0x00 }, + {0x3050 ,0x00 }, + {0x30B6 ,0x00 }, + {0x30B7 ,0x00 }, + {0x3116 ,0x08 }, + {0x3117 ,0x00 }, + {0x31A0 ,0x20 }, + {0x31A1 ,0x0F }, + {0x300C ,0x3B }, + {0x300D ,0x29 }, + {0x314C ,0x29 }, + {0x314D ,0x01 }, + {0x315A ,0x0A }, + {0x3168 ,0xA0 }, + {0x316A ,0x7E }, + {0x319E ,0x02 }, + {0x3199 ,0x00 }, + {0x319D ,0x00 }, + {0x31DD ,0x03 }, + {0x3300 ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, + {0x3A01 ,0x03 }, + {0x3A18 ,0x7F }, + {0x3A19 ,0x00 }, + {0x3A1A ,0x37 }, + {0x3A1B ,0x00 }, + {0x3A1C ,0x37 }, + {0x3A1D ,0x00 }, + {0x3A1E ,0xF7 }, + {0x3A1F ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x6F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x5F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x2F }, + {0x3A21 ,0x00 }, + {0x3078 ,0x02 }, + {0x3079 ,0x00 }, + {0x307A ,0x00 }, + {0x307B ,0x00 }, + {0x3080 ,0x02 }, + {0x3081 ,0x00 }, + {0x3082 ,0x00 }, + {0x3083 ,0x00 }, + {0x3088 ,0x02 }, + {0x3094 ,0x00 }, + {0x3095 ,0x00 }, + {0x3096 ,0x00 }, + {0x309B ,0x02 }, + {0x309C ,0x00 }, + {0x309D ,0x00 }, + {0x309E ,0x00 }, + {0x30A4 ,0x00 }, + {0x30A5 ,0x00 }, + {0x3288 ,0x21 }, + {0x328A ,0x02 }, + {0x3414 ,0x05 }, + {0x3416 ,0x18 }, + {0x35AC ,0x0E }, + {0x3648 ,0x01 }, + {0x364A ,0x04 }, + {0x364C ,0x04 }, + {0x3678 ,0x01 }, + {0x367C ,0x31 }, + {0x367E ,0x31 }, + {0x3708 ,0x02 }, + {0x3714 ,0x01 }, + {0x3715 ,0x02 }, + {0x3716 ,0x02 }, + {0x3717 ,0x02 }, + {0x371C ,0x3D }, + {0x371D ,0x3F }, + {0x372C ,0x00 }, + {0x372D ,0x00 }, + {0x372E ,0x46 }, + {0x372F ,0x00 }, + {0x3730 ,0x89 }, + {0x3731 ,0x00 }, + {0x3732 ,0x08 }, + {0x3733 ,0x01 }, + {0x3734 ,0xFE }, + {0x3735 ,0x05 }, + {0x375D ,0x00 }, + {0x375E ,0x00 }, + {0x375F ,0x61 }, + {0x3760 ,0x06 }, + {0x3768 ,0x1B }, + {0x3769 ,0x1B }, + {0x376A ,0x1A }, + {0x376B ,0x19 }, + {0x376C ,0x18 }, + {0x376D ,0x14 }, + {0x376E ,0x0F }, + {0x3776 ,0x00 }, + {0x3777 ,0x00 }, + {0x3778 ,0x46 }, + {0x3779 ,0x00 }, + {0x377A ,0x08 }, + {0x377B ,0x01 }, + {0x377C ,0x45 }, + {0x377D ,0x01 }, + {0x377E ,0x23 }, + {0x377F ,0x02 }, + {0x3780 ,0xD9 }, + {0x3781 ,0x03 }, + {0x3782 ,0xF5 }, + {0x3783 ,0x06 }, + {0x3784 ,0xA5 }, + {0x3788 ,0x0F }, + {0x378A ,0xD9 }, + {0x378B ,0x03 }, + {0x378C ,0xEB }, + {0x378D ,0x05 }, + {0x378E ,0x87 }, + {0x378F ,0x06 }, + {0x3790 ,0xF5 }, + {0x3792 ,0x43 }, + {0x3794 ,0x7A }, + {0x3796 ,0xA1 }, + {0x37B0 ,0x37 }, + {0x3E04 ,0x0E }, + {0x30E8 ,0x50 }, + {0x30E9 ,0x00 }, + {0x3E04 ,0x0E }, + {0x3002 ,0x00 }, +}; +/* Sensor mode registers */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000 ,0x01 },@@ -243,20 +406,56 @@ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3a00, 0x01}, }; +static const struct imx334_reg raw10_framefmt_regs[] = { + {0x3050 ,0x00 }, + {0x319D ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, +}; + +static const struct imx334_reg raw12_framefmt_regs[] = { + {0x3050 ,0x01 }, + {0x319D ,0x01 }, + {0x341C ,0x47 }, + {0x341D ,0x00 }, +}; + +/* +* The supported BUS formats. +*/ +static const u32 imx334_mbus_codes[] = { +MEDIA_BUS_FMT_SRGGB12_1X12 , +MEDIA_BUS_FMT_SRGGB10_1X10 , +}; +/* Supported sensor mode configurations */ -static const struct imx334_mode supported_mode = { - .width =3840 , - .height =2160 , - .hblank =560 , - .vblank =2340 , - .vblank_min =90 , - .vblank_max =132840 , - .pclk =594000000 , - .link_freq_idx =0 , - .code =MEDIA_BUS_FMT_SRGGB12_1X12 , - .reg_list = { - .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), - .regs = mode_3840x2160_regs, +static const struct imx334_mode supported_modes[] = { + { + .width =3840 , + .height =2160 , + .hblank =560 , + .vblank =2340 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), + .regs = mode_3840x2160_regs, + }, + }, { + .width =1920 , + .height =1080 , + .hblank =560 , + .vblank =1170 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_1920x1080_regs), + .regs = mode_1920x1080_regs, + }, }, };@@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { -if (code->index >0 ) +if (code->index >=ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - code->code = supported_mode.code; + code->code = imx334_mbus_codes[code->index];return 0 ; }@@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd,struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fsize) { -if (fsize->index >0 ) + unsigned int i; + +if (fsize->index >=ARRAY_SIZE (supported_modes))return -EINVAL ; -if (fsize->code != supported_mode.code) +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); ++i) { +if (imx334_mbus_codes[i] == fsize->code) +break ; + } + +if (i ==ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - fsize->min_width = supported_mode.width; + fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; - fsize->min_height = supported_mode.height; + fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height;return 0 ;@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = imx334->cur_code; fmt->format.field =V4L2_FIELD_NONE ; fmt->format.colorspace =V4L2_COLORSPACE_RAW ; fmt->format.ycbcr_enc =V4L2_YCBCR_ENC_DEFAULT ;
drivers/media/i2c/imx334.c static int imx334_get_pad_format(struct v4l2_subdev *sd, · line 805
Quoted 9 lines
drivers/media/i2c/imx334.c +6
-0@@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,return 0 ; } +static int imx334_get_format_code (struct imx334 *imx334,struct v4l2_subdev_format *fmt) +{ +unsigned int i; + +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); i++) { +if (imx334_mbus_codes[i] == fmt->format.code)
If you return here, you can remove the check below.
Quoted 13 lines
drivers/media/i2c/imx334.c +9
-0+break ; + } + +if (i >=ARRAY_SIZE (imx334_mbus_codes)) + i =0 ; + +return imx334_mbus_codes[i]; +} +/** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 833
Quoted 5 lines
drivers/media/i2c/imx334.c +1
-1@@ -609,7 +830,13 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,mutex_lock (&imx334->mutex); - mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt);
This should be done only for the active format.
Quoted 24 lines
drivers/media/i2c/imx334.c +8
-2+ + mode =v4l2_find_nearest_size (supported_modes, +ARRAY_SIZE (supported_modes), + width, height, + fmt->format.width, fmt->format.height); +imx334_fill_pad_format (imx334, mode, fmt);if (fmt->which ==V4L2_SUBDEV_FORMAT_TRY ) {@@ -617,7 +844,7 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd, framefmt =v4l2_subdev_get_try_format (sd, sd_state, fmt->pad); *framefmt = fmt->format; - }else { + }else if (imx334->cur_mode != mode) { ret =imx334_update_controls (imx334, mode);if (!ret) imx334->cur_mode = mode;@@ -642,11 +869,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,struct v4l2_subdev_format fmt = {0 }; fmt.which = sd_state ?V4L2_SUBDEV_FORMAT_TRY :V4L2_SUBDEV_FORMAT_ACTIVE ; -imx334_fill_pad_format (imx334, &supported_mode, &fmt); +imx334_fill_pad_format (imx334, &supported_modes[0 ], &fmt);
drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd, · line 882
Quoted 10 lines
drivers/media/i2c/imx334.c +6
-0return imx334_set_pad_format (sd, sd_state, &fmt); } +static int imx334_set_framefmt (struct imx334 *imx334) +{ +switch (imx334->cur_code) { +case MEDIA_BUS_FMT_SRGGB10_1X10 : +return imx334_write_regs (imx334, raw10_framefmt_regs, +ARRAY_SIZE (raw10_framefmt_regs));
Please align to immediately right of the opening parenthesis. Same below.
drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd, · line 886
Quoted 4 lines
drivers/media/i2c/imx334.c +4
-0+ +case MEDIA_BUS_FMT_SRGGB12_1X12 : +return imx334_write_regs (imx334, raw12_framefmt_regs, +ARRAY_SIZE (raw12_framefmt_regs));
I think you'll also need changes to the pixel clock calculation.
Quoted 32 lines
drivers/media/i2c/imx334.c +14
-1+ } + +return -EINVAL ; +} +/** * imx334_start_streaming() - Start sensor stream * @imx334: pointer to imx334 device @@ -667,6 +909,13 @@ static int imx334_start_streaming(struct imx334 *imx334)return ret; } + ret =imx334_set_framefmt (imx334); +if (ret) { +dev_err (imx334->dev,"%s failed to set frame format: %d\n" , + __func__, ret); +return ret; + } +/* Setup handler will write actual exposure and gain */ ret =__v4l2_ctrl_handler_setup (imx334->sd.ctrl_handler);if (ret) {@@ -1037,7 +1286,8 @@ static int imx334_probe(struct i2c_client *client) }/* Set default mode to max resolution */ - imx334->cur_mode = &supported_mode; + imx334->cur_mode = &supported_modes[0 ]; + imx334->cur_code = imx334_mbus_codes[0 ]; imx334->vblank = imx334->cur_mode->vblank; ret =imx334_init_controls (imx334);
Signature · 3 lines
Kind regards, Sakari Ailus
Quoted 387 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 20 September 2022 05:44 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth mode[Some people who received this message don't often get email from [email protected]. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Hi Shravan,
Thanks for the patch.
drivers/media/i2c/imx334.c static const struct imx334_reg
Quoted 237 lines · shravan kumar
From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080 resolutions while leaving the existing configuration as default
CC Conor Dooley <[email protected]>Signed-off-by Prakash Battu <[email protected]>Signed-off-by Shravan Chippa <[email protected]>---
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format failsV2 -> V3
- Fixed the warning reported by kernel test robotV1 -> V2
- Addressed the review comment given by Jacopo Mondi, Which has bug inimx334_enum_frame_size()loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first--- drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- 1 file changed, 276 insertions(+), 26 deletions(-)drivers/media/i2c/imx334.c +0
-1@@ -79,7 +79,6 @@ struct imx334_reg_list {* struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height -* @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@ struct imx334_reg_list { struct imx334_mode { u32 width; u32 height;drivers/media/i2c/imx334.c +165
-1-u32 code;u32 hblank;u32 vblank;u32 vblank_min;@@ -119,6 +117,7 @@ struct imx334_mode {* @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls +* @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 {@@ -140,6 +139,7 @@ struct imx334 {u32 vblank;const struct imx334_mode *cur_mode;struct mutex mutex; +u32 cur_code;bool streaming; };@@ -147,6 +147,169 @@ static const s64 link_freq[] = { IMX334_LINK_FREQ, }; +/* Sensor mode registers */ +static const struct imx334_reg mode_1920x1080_regs[] = { + {0x3000 ,0x01 }, + {0x3018 ,0x04 }, + {0x3030 ,0xCA }, + {0x3031 ,0x08 }, + {0x3032 ,0x00 }, + {0x3034 ,0x4C }, + {0x3035 ,0x04 }, + {0x302C ,0xF0 }, + {0x302D ,0x03 }, + {0x302E ,0x80 }, + {0x302F ,0x07 }, + {0x3074 ,0xCC }, + {0x3075 ,0x02 }, + {0x308E ,0xCD }, + {0x308F ,0x02 }, + {0x3076 ,0x38 }, + {0x3077 ,0x04 }, + {0x3090 ,0x38 }, + {0x3091 ,0x04 }, + {0x3308 ,0x38 }, + {0x3309 ,0x04 }, + {0x30C6 ,0x00 }, + {0x30C7 ,0x00 }, + {0x30CE ,0x00 }, + {0x30CF ,0x00 }, + {0x30D8 ,0x18 }, + {0x30D9 ,0x0A }, + {0x304C ,0x00 }, + {0x304E ,0x00 }, + {0x304F ,0x00 }, + {0x3050 ,0x00 }, + {0x30B6 ,0x00 }, + {0x30B7 ,0x00 }, + {0x3116 ,0x08 }, + {0x3117 ,0x00 }, + {0x31A0 ,0x20 }, + {0x31A1 ,0x0F }, + {0x300C ,0x3B }, + {0x300D ,0x29 }, + {0x314C ,0x29 }, + {0x314D ,0x01 }, + {0x315A ,0x0A }, + {0x3168 ,0xA0 }, + {0x316A ,0x7E }, + {0x319E ,0x02 }, + {0x3199 ,0x00 }, + {0x319D ,0x00 }, + {0x31DD ,0x03 }, + {0x3300 ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, + {0x3A01 ,0x03 }, + {0x3A18 ,0x7F }, + {0x3A19 ,0x00 }, + {0x3A1A ,0x37 }, + {0x3A1B ,0x00 }, + {0x3A1C ,0x37 }, + {0x3A1D ,0x00 }, + {0x3A1E ,0xF7 }, + {0x3A1F ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x6F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x5F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x2F }, + {0x3A21 ,0x00 }, + {0x3078 ,0x02 }, + {0x3079 ,0x00 }, + {0x307A ,0x00 }, + {0x307B ,0x00 }, + {0x3080 ,0x02 }, + {0x3081 ,0x00 }, + {0x3082 ,0x00 }, + {0x3083 ,0x00 }, + {0x3088 ,0x02 }, + {0x3094 ,0x00 }, + {0x3095 ,0x00 }, + {0x3096 ,0x00 }, + {0x309B ,0x02 }, + {0x309C ,0x00 }, + {0x309D ,0x00 }, + {0x309E ,0x00 }, + {0x30A4 ,0x00 }, + {0x30A5 ,0x00 }, + {0x3288 ,0x21 }, + {0x328A ,0x02 }, + {0x3414 ,0x05 }, + {0x3416 ,0x18 }, + {0x35AC ,0x0E }, + {0x3648 ,0x01 }, + {0x364A ,0x04 }, + {0x364C ,0x04 }, + {0x3678 ,0x01 }, + {0x367C ,0x31 }, + {0x367E ,0x31 }, + {0x3708 ,0x02 }, + {0x3714 ,0x01 }, + {0x3715 ,0x02 }, + {0x3716 ,0x02 }, + {0x3717 ,0x02 }, + {0x371C ,0x3D }, + {0x371D ,0x3F }, + {0x372C ,0x00 }, + {0x372D ,0x00 }, + {0x372E ,0x46 }, + {0x372F ,0x00 }, + {0x3730 ,0x89 }, + {0x3731 ,0x00 }, + {0x3732 ,0x08 }, + {0x3733 ,0x01 }, + {0x3734 ,0xFE }, + {0x3735 ,0x05 }, + {0x375D ,0x00 }, + {0x375E ,0x00 }, + {0x375F ,0x61 }, + {0x3760 ,0x06 }, + {0x3768 ,0x1B }, + {0x3769 ,0x1B }, + {0x376A ,0x1A }, + {0x376B ,0x19 }, + {0x376C ,0x18 }, + {0x376D ,0x14 }, + {0x376E ,0x0F }, + {0x3776 ,0x00 }, + {0x3777 ,0x00 }, + {0x3778 ,0x46 }, + {0x3779 ,0x00 }, + {0x377A ,0x08 }, + {0x377B ,0x01 }, + {0x377C ,0x45 }, + {0x377D ,0x01 }, + {0x377E ,0x23 }, + {0x377F ,0x02 }, + {0x3780 ,0xD9 }, + {0x3781 ,0x03 }, + {0x3782 ,0xF5 }, + {0x3783 ,0x06 }, + {0x3784 ,0xA5 }, + {0x3788 ,0x0F }, + {0x378A ,0xD9 }, + {0x378B ,0x03 }, + {0x378C ,0xEB }, + {0x378D ,0x05 }, + {0x378E ,0x87 }, + {0x378F ,0x06 }, + {0x3790 ,0xF5 }, + {0x3792 ,0x43 }, + {0x3794 ,0x7A }, + {0x3796 ,0xA1 }, + {0x37B0 ,0x37 }, + {0x3E04 ,0x0E }, + {0x30E8 ,0x50 }, + {0x30E9 ,0x00 }, + {0x3E04 ,0x0E }, + {0x3002 ,0x00 }, +}; +/* Sensor mode registers */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000 ,0x01 },@@ -243,20 +406,56 @@ static const struct imx334_regmode_3840x2160_regs[] = {
drivers/media/i2c/imx334.c static int imx334_enum_mbus_code(struct
Quoted 70 lines
drivers/media/i2c/imx334.c +49
-12{0x3a00, 0x01}, }; +static const struct imx334_reg raw10_framefmt_regs[] = { + {0x3050 ,0x00 }, + {0x319D ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, +}; + +static const struct imx334_reg raw12_framefmt_regs[] = { + {0x3050 ,0x01 }, + {0x319D ,0x01 }, + {0x341C ,0x47 }, + {0x341D ,0x00 }, +}; + +/* +* The supported BUS formats. +*/ +static const u32 imx334_mbus_codes[] = { +MEDIA_BUS_FMT_SRGGB12_1X12 , +MEDIA_BUS_FMT_SRGGB10_1X10 , +}; + /* Supported sensor mode configurations */ -static const structimx334_mode supported_mode = { - .width =3840 , - .height =2160 , - .hblank =560 , - .vblank =2340 , - .vblank_min =90 , - .vblank_max =132840 , - .pclk =594000000 , - .link_freq_idx =0 , - .code =MEDIA_BUS_FMT_SRGGB12_1X12 , - .reg_list = { - .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), - .regs = mode_3840x2160_regs, +static const struct imx334_mode supported_modes[] = { + { + .width =3840 , + .height =2160 , + .hblank =560 , + .vblank =2340 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), + .regs = mode_3840x2160_regs, + }, + }, { + .width =1920 , + .height =1080 , + .hblank =560 , + .vblank =1170 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_1920x1080_regs), + .regs = mode_1920x1080_regs, + }, }, };@@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct
v4l2_subdev*sd,drivers/media/i2c/imx334.c static int imx334_enum_frame_size(struct
Quoted 13 lines
drivers/media/i2c/imx334.c +2
-2struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { - if (code->index > 0) + if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) return -EINVAL; - code->code = supported_mode.code; + code->code = imx334_mbus_codes[code->index];return 0 ; }@@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct
v4l2_subdev*sd,Quoted 39 lines
drivers/media/i2c/imx334.c +13
-5struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fsize) { - if (fsize->index > 0) + unsigned int i; + +if (fsize->index >=ARRAY_SIZE (supported_modes))return -EINVAL ; -if (fsize->code != supported_mode.code) +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); ++i) { +if (imx334_mbus_codes[i] == fsize->code) +break ; + } + +if (i ==ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - fsize->min_width = supported_mode.width; + fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; - fsize->min_height = supported_mode.height; + fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height;return 0 ;@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = imx334->cur_code; fmt->format.field =V4L2_FIELD_NONE ; fmt->format.colorspace =V4L2_COLORSPACE_RAW ; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd, return 0; }
Quoted 8 lines
drivers/media/i2c/imx334.c static int imx334_get_pad_format(struct v4l2_subdev *sd, · line 805
Quoted 6 lines
drivers/media/i2c/imx334.c +6
-0+static int imx334_get_format_code (struct imx334 *imx334,struct +v4l2_subdev_format *fmt) { +unsigned int i; + +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); i++) { +if (imx334_mbus_codes[i] == fmt->format.code)If you return here, you can remove the check below.
This function taken ref from imx219 driver.
And suggested by given by Jacopo Mondi
Change in v2
Quoted 15 lines
Quoted 15 lines
drivers/media/i2c/imx334.c +9
-0+break ; + } + +if (i >=ARRAY_SIZE (imx334_mbus_codes)) + i =0 ; + +return imx334_mbus_codes[i]; +} +/** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure @@ -609,7 +830,13 @@ static int imx334_set_pad_format(struct
v4l2_subdev*sd,
Quoted 6 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 833
Quoted 4 lines
mutex_lock(&imx334->mutex);drivers/media/i2c/imx334.c +1
-1- mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt);This should be done only for the active format.
Are you expecting if condiftion to check the current bus code with set_pad_fromat bus code?
Quoted 40 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd,
Quoted 11 lines
drivers/media/i2c/imx334.c +7
-0+ + mode =v4l2_find_nearest_size (supported_modes, +ARRAY_SIZE (supported_modes), + width, height, + fmt->format.width, + fmt->format.height); +imx334_fill_pad_format (imx334, mode, fmt); if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +844,7@@
Quoted 12 lines
static int imx334_set_pad_format(struct
v4l2_subdev*sd,framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); *framefmt = fmt->format;drivers/media/i2c/imx334.c +1
-1- }else { + }else if (imx334->cur_mode != mode) { ret =imx334_update_controls (imx334, mode);if (!ret) imx334->cur_mode = mode; @@ -642,11 +869,26 @@static int imx334_init_pad_cfg(struct
v4l2_subdev*sd,
structv4l2_subdev_formatfmt = { 0 };Quoted 1 line
fmt.which =
sd_state?V4L2_SUBDEV_FORMAT_TRY:
V4L2_SUBDEV_FORMAT_ACTIVE;drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 11 lines
drivers/media/i2c/imx334.c +7
-1-imx334_fill_pad_format (imx334, &supported_mode, &fmt); +imx334_fill_pad_format (imx334, &supported_modes[0 ], &fmt);return imx334_set_pad_format (sd, sd_state, &fmt); } +static int imx334_set_framefmt (struct imx334 *imx334) { +switch (imx334->cur_code) { +case MEDIA_BUS_FMT_SRGGB10_1X10 : +return imx334_write_regs (imx334, raw10_framefmt_regs, + +ARRAY_SIZE (raw10_framefmt_regs));Please align to immediately right of the opening parenthesis. Same below.
Quoted 8 lines
drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 5 lines
drivers/media/i2c/imx334.c +5
-0+ +case MEDIA_BUS_FMT_SRGGB12_1X12 : +return imx334_write_regs (imx334, raw12_framefmt_regs, + +ARRAY_SIZE (raw12_framefmt_regs));I think you'll also need changes to the pixel clock calculation.
In this driver pixel clock read only variable.
Pixel clock change maybe in different series.
Thanks,
Shravan
Quoted 38 lines
drivers/media/i2c/imx334.c static int imx334_start_streaming(struct imx334
Quoted 9 lines
drivers/media/i2c/imx334.c +5
-0+ } + +return -EINVAL ; +} +/** * imx334_start_streaming() - Start sensor stream * @imx334: pointer to imx334 device @@ -667,6 +909,13 @@ static int imx334_start_streaming(struct imx334*imx334)
Quoted 14 lines
drivers/media/i2c/imx334.c +7
-0return ret; } + ret =imx334_set_framefmt (imx334); +if (ret) { +dev_err (imx334->dev,"%s failed to set frame format: %d\n" , + __func__, ret); +return ret; + } +/* Setup handler will write actual exposure and gain */ ret =__v4l2_ctrl_handler_setup (imx334->sd.ctrl_handler);if (ret) {drivers/media/i2c/imx334.c static int imx334_probe(struct i2c_client *client) · line 1293
Quoted 9 lines
drivers/media/i2c/imx334.c +2
-1@@ -1037,7 +1286,8 @@ static int imx334_probe(struct i2c_client *client) }/* Set default mode to max resolution */ - imx334->cur_mode = &supported_mode; + imx334->cur_mode = &supported_modes[0 ]; + imx334->cur_code = imx334_mbus_codes[0 ]; imx334->vblank = imx334->cur_mode->vblank; ret =imx334_init_controls (imx334);--
Kind regards,Sakari Ailus
Hi Shravan,
Quoted 13 lines · On Mon, Sep 26, 2022 at 11:32:31AM +0000, [email protected] wrote:
Quoted 13 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 20 September 2022 05:44 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth mode
Quoted 6 lines
Quoted 6 lines
[Some people who received this message don't often get email from [email protected]. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
This looks like a mail system problem.
Quoted 394 lines
Quoted 368 lines
Hi Shravan,
Thanks for the patch.
drivers/media/i2c/imx334.c static const struct imx334_reg
Quoted 237 lines · shravan kumar
From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080 resolutions while leaving the existing configuration as default
CC Conor Dooley <[email protected]>Signed-off-by Prakash Battu <[email protected]>Signed-off-by Shravan Chippa <[email protected]>---
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format failsV2 -> V3
- Fixed the warning reported by kernel test robotV1 -> V2
- Addressed the review comment given by Jacopo Mondi, Which has bug inimx334_enum_frame_size()loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first--- drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- 1 file changed, 276 insertions(+), 26 deletions(-)drivers/media/i2c/imx334.c +0
-1@@ -79,7 +79,6 @@ struct imx334_reg_list {* struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height -* @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@ struct imx334_reg_list { struct imx334_mode { u32 width; u32 height;drivers/media/i2c/imx334.c +165
-1-u32 code;u32 hblank;u32 vblank;u32 vblank_min;@@ -119,6 +117,7 @@ struct imx334_mode {* @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls +* @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 {@@ -140,6 +139,7 @@ struct imx334 {u32 vblank;const struct imx334_mode *cur_mode;struct mutex mutex; +u32 cur_code;bool streaming; };@@ -147,6 +147,169 @@ static const s64 link_freq[] = { IMX334_LINK_FREQ, }; +/* Sensor mode registers */ +static const struct imx334_reg mode_1920x1080_regs[] = { + {0x3000 ,0x01 }, + {0x3018 ,0x04 }, + {0x3030 ,0xCA }, + {0x3031 ,0x08 }, + {0x3032 ,0x00 }, + {0x3034 ,0x4C }, + {0x3035 ,0x04 }, + {0x302C ,0xF0 }, + {0x302D ,0x03 }, + {0x302E ,0x80 }, + {0x302F ,0x07 }, + {0x3074 ,0xCC }, + {0x3075 ,0x02 }, + {0x308E ,0xCD }, + {0x308F ,0x02 }, + {0x3076 ,0x38 }, + {0x3077 ,0x04 }, + {0x3090 ,0x38 }, + {0x3091 ,0x04 }, + {0x3308 ,0x38 }, + {0x3309 ,0x04 }, + {0x30C6 ,0x00 }, + {0x30C7 ,0x00 }, + {0x30CE ,0x00 }, + {0x30CF ,0x00 }, + {0x30D8 ,0x18 }, + {0x30D9 ,0x0A }, + {0x304C ,0x00 }, + {0x304E ,0x00 }, + {0x304F ,0x00 }, + {0x3050 ,0x00 }, + {0x30B6 ,0x00 }, + {0x30B7 ,0x00 }, + {0x3116 ,0x08 }, + {0x3117 ,0x00 }, + {0x31A0 ,0x20 }, + {0x31A1 ,0x0F }, + {0x300C ,0x3B }, + {0x300D ,0x29 }, + {0x314C ,0x29 }, + {0x314D ,0x01 }, + {0x315A ,0x0A }, + {0x3168 ,0xA0 }, + {0x316A ,0x7E }, + {0x319E ,0x02 }, + {0x3199 ,0x00 }, + {0x319D ,0x00 }, + {0x31DD ,0x03 }, + {0x3300 ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, + {0x3A01 ,0x03 }, + {0x3A18 ,0x7F }, + {0x3A19 ,0x00 }, + {0x3A1A ,0x37 }, + {0x3A1B ,0x00 }, + {0x3A1C ,0x37 }, + {0x3A1D ,0x00 }, + {0x3A1E ,0xF7 }, + {0x3A1F ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x6F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x5F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x2F }, + {0x3A21 ,0x00 }, + {0x3078 ,0x02 }, + {0x3079 ,0x00 }, + {0x307A ,0x00 }, + {0x307B ,0x00 }, + {0x3080 ,0x02 }, + {0x3081 ,0x00 }, + {0x3082 ,0x00 }, + {0x3083 ,0x00 }, + {0x3088 ,0x02 }, + {0x3094 ,0x00 }, + {0x3095 ,0x00 }, + {0x3096 ,0x00 }, + {0x309B ,0x02 }, + {0x309C ,0x00 }, + {0x309D ,0x00 }, + {0x309E ,0x00 }, + {0x30A4 ,0x00 }, + {0x30A5 ,0x00 }, + {0x3288 ,0x21 }, + {0x328A ,0x02 }, + {0x3414 ,0x05 }, + {0x3416 ,0x18 }, + {0x35AC ,0x0E }, + {0x3648 ,0x01 }, + {0x364A ,0x04 }, + {0x364C ,0x04 }, + {0x3678 ,0x01 }, + {0x367C ,0x31 }, + {0x367E ,0x31 }, + {0x3708 ,0x02 }, + {0x3714 ,0x01 }, + {0x3715 ,0x02 }, + {0x3716 ,0x02 }, + {0x3717 ,0x02 }, + {0x371C ,0x3D }, + {0x371D ,0x3F }, + {0x372C ,0x00 }, + {0x372D ,0x00 }, + {0x372E ,0x46 }, + {0x372F ,0x00 }, + {0x3730 ,0x89 }, + {0x3731 ,0x00 }, + {0x3732 ,0x08 }, + {0x3733 ,0x01 }, + {0x3734 ,0xFE }, + {0x3735 ,0x05 }, + {0x375D ,0x00 }, + {0x375E ,0x00 }, + {0x375F ,0x61 }, + {0x3760 ,0x06 }, + {0x3768 ,0x1B }, + {0x3769 ,0x1B }, + {0x376A ,0x1A }, + {0x376B ,0x19 }, + {0x376C ,0x18 }, + {0x376D ,0x14 }, + {0x376E ,0x0F }, + {0x3776 ,0x00 }, + {0x3777 ,0x00 }, + {0x3778 ,0x46 }, + {0x3779 ,0x00 }, + {0x377A ,0x08 }, + {0x377B ,0x01 }, + {0x377C ,0x45 }, + {0x377D ,0x01 }, + {0x377E ,0x23 }, + {0x377F ,0x02 }, + {0x3780 ,0xD9 }, + {0x3781 ,0x03 }, + {0x3782 ,0xF5 }, + {0x3783 ,0x06 }, + {0x3784 ,0xA5 }, + {0x3788 ,0x0F }, + {0x378A ,0xD9 }, + {0x378B ,0x03 }, + {0x378C ,0xEB }, + {0x378D ,0x05 }, + {0x378E ,0x87 }, + {0x378F ,0x06 }, + {0x3790 ,0xF5 }, + {0x3792 ,0x43 }, + {0x3794 ,0x7A }, + {0x3796 ,0xA1 }, + {0x37B0 ,0x37 }, + {0x3E04 ,0x0E }, + {0x30E8 ,0x50 }, + {0x30E9 ,0x00 }, + {0x3E04 ,0x0E }, + {0x3002 ,0x00 }, +}; +/* Sensor mode registers */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000 ,0x01 },@@ -243,20 +406,56 @@ static const struct imx334_regmode_3840x2160_regs[] = {
drivers/media/i2c/imx334.c static int imx334_enum_mbus_code(struct
Quoted 70 lines
drivers/media/i2c/imx334.c +49
-12{0x3a00, 0x01}, }; +static const struct imx334_reg raw10_framefmt_regs[] = { + {0x3050 ,0x00 }, + {0x319D ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, +}; + +static const struct imx334_reg raw12_framefmt_regs[] = { + {0x3050 ,0x01 }, + {0x319D ,0x01 }, + {0x341C ,0x47 }, + {0x341D ,0x00 }, +}; + +/* +* The supported BUS formats. +*/ +static const u32 imx334_mbus_codes[] = { +MEDIA_BUS_FMT_SRGGB12_1X12 , +MEDIA_BUS_FMT_SRGGB10_1X10 , +}; + /* Supported sensor mode configurations */ -static const structimx334_mode supported_mode = { - .width =3840 , - .height =2160 , - .hblank =560 , - .vblank =2340 , - .vblank_min =90 , - .vblank_max =132840 , - .pclk =594000000 , - .link_freq_idx =0 , - .code =MEDIA_BUS_FMT_SRGGB12_1X12 , - .reg_list = { - .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), - .regs = mode_3840x2160_regs, +static const struct imx334_mode supported_modes[] = { + { + .width =3840 , + .height =2160 , + .hblank =560 , + .vblank =2340 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), + .regs = mode_3840x2160_regs, + }, + }, { + .width =1920 , + .height =1080 , + .hblank =560 , + .vblank =1170 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_1920x1080_regs), + .regs = mode_1920x1080_regs, + }, }, };@@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct
v4l2_subdev*sd,drivers/media/i2c/imx334.c static int imx334_enum_frame_size(struct
Quoted 13 lines
drivers/media/i2c/imx334.c +2
-2struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { - if (code->index > 0) + if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) return -EINVAL; - code->code = supported_mode.code; + code->code = imx334_mbus_codes[code->index];return 0 ; }@@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct
v4l2_subdev*sd,Quoted 39 lines
drivers/media/i2c/imx334.c +13
-5struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fsize) { - if (fsize->index > 0) + unsigned int i; + +if (fsize->index >=ARRAY_SIZE (supported_modes))return -EINVAL ; -if (fsize->code != supported_mode.code) +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); ++i) { +if (imx334_mbus_codes[i] == fsize->code) +break ; + } + +if (i ==ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - fsize->min_width = supported_mode.width; + fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; - fsize->min_height = supported_mode.height; + fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height;return 0 ;@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = imx334->cur_code; fmt->format.field =V4L2_FIELD_NONE ; fmt->format.colorspace =V4L2_COLORSPACE_RAW ; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd, return 0; }Quoted 8 lines
drivers/media/i2c/imx334.c static int imx334_get_pad_format(struct v4l2_subdev *sd, · line 805
Quoted 6 lines
drivers/media/i2c/imx334.c +6
-0+static int imx334_get_format_code (struct imx334 *imx334,struct +v4l2_subdev_format *fmt) { +unsigned int i; + +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); i++) { +if (imx334_mbus_codes[i] == fmt->format.code)If you return here, you can remove the check below.
This function taken ref from imx219 driver.
And suggested by given by Jacopo Mondi
Change in v2Quoted 15 lines
Quoted 15 lines
drivers/media/i2c/imx334.c +9
-0+break ; + } + +if (i >=ARRAY_SIZE (imx334_mbus_codes)) + i =0 ; + +return imx334_mbus_codes[i]; +} +/** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure @@ -609,7 +830,13 @@ static int imx334_set_pad_format(struct
v4l2_subdev*sd,
Quoted 7 lines
Quoted 6 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 833
Quoted 4 lines
mutex_lock(&imx334->mutex);drivers/media/i2c/imx334.c +1
-1- mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt);This should be done only for the active format.
Are you expecting if condiftion to check the current bus code with
set_pad_fromatbus code?
Only assign the cur_code field when setting the active format.
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
drivers/media/i2c/imx334.c +7
-0+ + mode =v4l2_find_nearest_size (supported_modes, +ARRAY_SIZE (supported_modes), + width, height, + fmt->format.width, + fmt->format.height); +imx334_fill_pad_format (imx334, mode, fmt);
Quoted 8 lines
Quoted 8 lines
Quoted 1 line
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +844,7@@
Quoted 6 lines
static int imx334_set_pad_format(struct
v4l2_subdev*sd,framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); *framefmt = fmt->format;drivers/media/i2c/imx334.c +1
-1- }else { + }else if (imx334->cur_mode != mode) {
The mbus code no longer defines the mode. I think you'll need to take this into account (pixel rate and link frequency?).
Quoted 30 lines
Quoted 22 lines
Quoted 7 lines
ret = imx334_update_controls(imx334, mode); if (!ret) imx334->cur_mode = mode; @@ -642,11 +869,26 @@static int imx334_init_pad_cfg(struct
v4l2_subdev*sd,
structv4l2_subdev_formatfmt = { 0 };fmt.which =
sd_state?V4L2_SUBDEV_FORMAT_TRY:
V4L2_SUBDEV_FORMAT_ACTIVE;drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 11 lines
drivers/media/i2c/imx334.c +7
-1-imx334_fill_pad_format (imx334, &supported_mode, &fmt); +imx334_fill_pad_format (imx334, &supported_modes[0 ], &fmt);return imx334_set_pad_format (sd, sd_state, &fmt); } +static int imx334_set_framefmt (struct imx334 *imx334) { +switch (imx334->cur_code) { +case MEDIA_BUS_FMT_SRGGB10_1X10 : +return imx334_write_regs (imx334, raw10_framefmt_regs, + +ARRAY_SIZE (raw10_framefmt_regs));Please align to immediately right of the opening parenthesis. Same below.
Quoted 8 lines
drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 5 lines
drivers/media/i2c/imx334.c +5
-0+ +case MEDIA_BUS_FMT_SRGGB12_1X12 : +return imx334_write_regs (imx334, raw12_framefmt_regs, + +ARRAY_SIZE (raw12_framefmt_regs));I think you'll also need changes to the pixel clock calculation.
Quoted 2 lines
In this driver pixel clock read only variable.
Pixel clock change maybe in different series.
Please address it in this patch.
Is the link frequency affected by this patch as well?
Signature · 3 lines
Kind regards, Sakari Ailus
Quoted 443 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 26 September 2022 10:21 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth mode[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Hi Shravan,
Quoted 14 lines · On Mon, Sep 26, 2022 at 11:32:31AM +0000, [email protected] wrote:
Quoted 14 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 20 September 2022 05:44 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth modeQuoted 6 lines
Quoted 6 lines
[Some people who received this message don't often get email from [email protected]. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
This looks like a mail system problem.
Quoted 397 lines
Quoted 370 lines
Hi Shravan,
Thanks for the patch.
drivers/media/i2c/imx334.c static const struct imx334_reg
Quoted 238 lines · shravan kumar
From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080 resolutions while leaving the existing configuration as default
CC Conor Dooley <[email protected]>Signed-off-by Prakash Battu <[email protected]>Signed-off-by Shravan Chippa <[email protected]>---
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format failsV2 -> V3
- Fixed the warning reported by kernel test robotV1 -> V2
- Addressed the review comment given by Jacopo Mondi, Which has bug inimx334_enum_frame_size()loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first--- drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- 1 file changed, 276 insertions(+), 26 deletions(-)(quoted diff) +0
-0
b/drivers/media/i2c/imx334.cindex 062125501788..df2f1821569e 100644drivers/media/i2c/imx334.c +0
-1@@ -79,7 +79,6 @@ struct imx334_reg_list {* struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height -* @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@ struct imx334_reg_list { struct imx334_mode { u32 width; u32 height;drivers/media/i2c/imx334.c +165
-1-u32 code;u32 hblank;u32 vblank;u32 vblank_min;@@ -119,6 +117,7 @@ struct imx334_mode {* @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls +* @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 {@@ -140,6 +139,7 @@ struct imx334 {u32 vblank;const struct imx334_mode *cur_mode;struct mutex mutex; +u32 cur_code;bool streaming; };@@ -147,6 +147,169 @@ static const s64 link_freq[] = { IMX334_LINK_FREQ, }; +/* Sensor mode registers */ +static const struct imx334_reg mode_1920x1080_regs[] = { + {0x3000 ,0x01 }, + {0x3018 ,0x04 }, + {0x3030 ,0xCA }, + {0x3031 ,0x08 }, + {0x3032 ,0x00 }, + {0x3034 ,0x4C }, + {0x3035 ,0x04 }, + {0x302C ,0xF0 }, + {0x302D ,0x03 }, + {0x302E ,0x80 }, + {0x302F ,0x07 }, + {0x3074 ,0xCC }, + {0x3075 ,0x02 }, + {0x308E ,0xCD }, + {0x308F ,0x02 }, + {0x3076 ,0x38 }, + {0x3077 ,0x04 }, + {0x3090 ,0x38 }, + {0x3091 ,0x04 }, + {0x3308 ,0x38 }, + {0x3309 ,0x04 }, + {0x30C6 ,0x00 }, + {0x30C7 ,0x00 }, + {0x30CE ,0x00 }, + {0x30CF ,0x00 }, + {0x30D8 ,0x18 }, + {0x30D9 ,0x0A }, + {0x304C ,0x00 }, + {0x304E ,0x00 }, + {0x304F ,0x00 }, + {0x3050 ,0x00 }, + {0x30B6 ,0x00 }, + {0x30B7 ,0x00 }, + {0x3116 ,0x08 }, + {0x3117 ,0x00 }, + {0x31A0 ,0x20 }, + {0x31A1 ,0x0F }, + {0x300C ,0x3B }, + {0x300D ,0x29 }, + {0x314C ,0x29 }, + {0x314D ,0x01 }, + {0x315A ,0x0A }, + {0x3168 ,0xA0 }, + {0x316A ,0x7E }, + {0x319E ,0x02 }, + {0x3199 ,0x00 }, + {0x319D ,0x00 }, + {0x31DD ,0x03 }, + {0x3300 ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, + {0x3A01 ,0x03 }, + {0x3A18 ,0x7F }, + {0x3A19 ,0x00 }, + {0x3A1A ,0x37 }, + {0x3A1B ,0x00 }, + {0x3A1C ,0x37 }, + {0x3A1D ,0x00 }, + {0x3A1E ,0xF7 }, + {0x3A1F ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x6F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x5F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x2F }, + {0x3A21 ,0x00 }, + {0x3078 ,0x02 }, + {0x3079 ,0x00 }, + {0x307A ,0x00 }, + {0x307B ,0x00 }, + {0x3080 ,0x02 }, + {0x3081 ,0x00 }, + {0x3082 ,0x00 }, + {0x3083 ,0x00 }, + {0x3088 ,0x02 }, + {0x3094 ,0x00 }, + {0x3095 ,0x00 }, + {0x3096 ,0x00 }, + {0x309B ,0x02 }, + {0x309C ,0x00 }, + {0x309D ,0x00 }, + {0x309E ,0x00 }, + {0x30A4 ,0x00 }, + {0x30A5 ,0x00 }, + {0x3288 ,0x21 }, + {0x328A ,0x02 }, + {0x3414 ,0x05 }, + {0x3416 ,0x18 }, + {0x35AC ,0x0E }, + {0x3648 ,0x01 }, + {0x364A ,0x04 }, + {0x364C ,0x04 }, + {0x3678 ,0x01 }, + {0x367C ,0x31 }, + {0x367E ,0x31 }, + {0x3708 ,0x02 }, + {0x3714 ,0x01 }, + {0x3715 ,0x02 }, + {0x3716 ,0x02 }, + {0x3717 ,0x02 }, + {0x371C ,0x3D }, + {0x371D ,0x3F }, + {0x372C ,0x00 }, + {0x372D ,0x00 }, + {0x372E ,0x46 }, + {0x372F ,0x00 }, + {0x3730 ,0x89 }, + {0x3731 ,0x00 }, + {0x3732 ,0x08 }, + {0x3733 ,0x01 }, + {0x3734 ,0xFE }, + {0x3735 ,0x05 }, + {0x375D ,0x00 }, + {0x375E ,0x00 }, + {0x375F ,0x61 }, + {0x3760 ,0x06 }, + {0x3768 ,0x1B }, + {0x3769 ,0x1B }, + {0x376A ,0x1A }, + {0x376B ,0x19 }, + {0x376C ,0x18 }, + {0x376D ,0x14 }, + {0x376E ,0x0F }, + {0x3776 ,0x00 }, + {0x3777 ,0x00 }, + {0x3778 ,0x46 }, + {0x3779 ,0x00 }, + {0x377A ,0x08 }, + {0x377B ,0x01 }, + {0x377C ,0x45 }, + {0x377D ,0x01 }, + {0x377E ,0x23 }, + {0x377F ,0x02 }, + {0x3780 ,0xD9 }, + {0x3781 ,0x03 }, + {0x3782 ,0xF5 }, + {0x3783 ,0x06 }, + {0x3784 ,0xA5 }, + {0x3788 ,0x0F }, + {0x378A ,0xD9 }, + {0x378B ,0x03 }, + {0x378C ,0xEB }, + {0x378D ,0x05 }, + {0x378E ,0x87 }, + {0x378F ,0x06 }, + {0x3790 ,0xF5 }, + {0x3792 ,0x43 }, + {0x3794 ,0x7A }, + {0x3796 ,0xA1 }, + {0x37B0 ,0x37 }, + {0x3E04 ,0x0E }, + {0x30E8 ,0x50 }, + {0x30E9 ,0x00 }, + {0x3E04 ,0x0E }, + {0x3002 ,0x00 }, +}; +/* Sensor mode registers */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000 ,0x01 },@@ -243,20 +406,56 @@ static const struct imx334_regmode_3840x2160_regs[] = {
drivers/media/i2c/imx334.c static int imx334_enum_mbus_code(struct
Quoted 70 lines
drivers/media/i2c/imx334.c +49
-12{0x3a00, 0x01}, }; +static const struct imx334_reg raw10_framefmt_regs[] = { + {0x3050 ,0x00 }, + {0x319D ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, +}; + +static const struct imx334_reg raw12_framefmt_regs[] = { + {0x3050 ,0x01 }, + {0x319D ,0x01 }, + {0x341C ,0x47 }, + {0x341D ,0x00 }, +}; + +/* +* The supported BUS formats. +*/ +static const u32 imx334_mbus_codes[] = { +MEDIA_BUS_FMT_SRGGB12_1X12 , +MEDIA_BUS_FMT_SRGGB10_1X10 , +}; + /* Supported sensor mode configurations */ -static const structimx334_mode supported_mode = { - .width =3840 , - .height =2160 , - .hblank =560 , - .vblank =2340 , - .vblank_min =90 , - .vblank_max =132840 , - .pclk =594000000 , - .link_freq_idx =0 , - .code =MEDIA_BUS_FMT_SRGGB12_1X12 , - .reg_list = { - .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), - .regs = mode_3840x2160_regs, +static const struct imx334_mode supported_modes[] = { + { + .width =3840 , + .height =2160 , + .hblank =560 , + .vblank =2340 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), + .regs = mode_3840x2160_regs, + }, + }, { + .width =1920 , + .height =1080 , + .hblank =560 , + .vblank =1170 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_1920x1080_regs), + .regs = mode_1920x1080_regs, + }, }, };@@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct
v4l2_subdev*sd,drivers/media/i2c/imx334.c static int imx334_enum_frame_size(struct
Quoted 13 lines
drivers/media/i2c/imx334.c +2
-2struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { - if (code->index > 0) + if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) return -EINVAL; - code->code = supported_mode.code; + code->code = imx334_mbus_codes[code->index];return 0 ; }@@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct
v4l2_subdev*sd,Quoted 40 lines
drivers/media/i2c/imx334.c +14
-5struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fsize) { - if (fsize->index > 0) + unsigned int i; + +if (fsize->index >=ARRAY_SIZE (supported_modes))return -EINVAL ; -if (fsize->code != supported_mode.code) +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); ++i) { +if (imx334_mbus_codes[i] == fsize->code) +break ; + } + +if (i ==ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - fsize->min_width = supported_mode.width; + fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; - fsize->min_height = supported_mode.height; + fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height;return 0 ;@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = imx334->cur_code; fmt->format.field =V4L2_FIELD_NONE ; fmt->format.colorspace =V4L2_COLORSPACE_RAW ; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev +*sd, return 0; }Quoted 8 lines
drivers/media/i2c/imx334.c static int imx334_get_pad_format(struct v4l2_subdev *sd, · line 805
Quoted 6 lines
drivers/media/i2c/imx334.c +6
-0+static int imx334_get_format_code (struct imx334 *imx334,struct +v4l2_subdev_format *fmt) { +unsigned int i; + +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); i++) { +if (imx334_mbus_codes[i] == fmt->format.code)If you return here, you can remove the check below.
This function taken ref from imx219 driver. And suggested by given by Jacopo Mondi Change in v2
Quoted 17 lines
Quoted 17 lines
drivers/media/i2c/imx334.c +9
-0+break ; + } + +if (i >=ARRAY_SIZE (imx334_mbus_codes)) + i =0 ; + +return imx334_mbus_codes[i]; } +/** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure @@ -609,7 +830,13 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
mutex_lock(&imx334->mutex);
Quoted 8 lines
Quoted 5 lines
Quoted 4 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 833
Quoted 2 lines
drivers/media/i2c/imx334.c +1
-1- mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt);This should be done only for the active format.
Are you expecting if condition to check the current bus code with
set_pad_fromatbus code?Only assign the
cur_codefield when setting the active format.
I have taken reference from imx219 drivercur_code will update if the requested format bus code maches with available bus_codes list if not mached with available bus_codes it will use defaults one only.
am I missing any thing here ?
Quoted 55 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
drivers/media/i2c/imx334.c +7
-0+ + mode =v4l2_find_nearest_size (supported_modes, +ARRAY_SIZE (supported_modes), + width, height, + fmt->format.width, + fmt->format.height); +imx334_fill_pad_format (imx334, mode, fmt);Quoted 8 lines
Quoted 8 lines
Quoted 1 line
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +844,7@@
Quoted 6 lines
static int imx334_set_pad_format(struct
v4l2_subdev*sd,framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); *framefmt = fmt->format;drivers/media/i2c/imx334.c +1
-1- }else { + }else if (imx334->cur_mode != mode) {The mbus code no longer defines the mode. I think you'll need to take this into account (pixel rate and link frequency?).
Quoted 32 lines
Quoted 32 lines
Quoted 7 lines
ret = imx334_update_controls(imx334, mode); if (!ret) imx334->cur_mode = mode; @@ -642,11 +869,26@@ static int imx334_init_pad_cfg(struct
v4l2_subdev*sd,
structv4l2_subdev_formatfmt = { 0 };fmt.which =
sd_state?V4L2_SUBDEV_FORMAT_TRY:
V4L2_SUBDEV_FORMAT_ACTIVE;drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 12 lines
drivers/media/i2c/imx334.c +8
-1-imx334_fill_pad_format (imx334, &supported_mode, &fmt); +imx334_fill_pad_format (imx334, &supported_modes[0 ], &fmt);return imx334_set_pad_format (sd, sd_state, &fmt); } +static int imx334_set_framefmt (struct imx334 *imx334) { +switch (imx334->cur_code) { +case MEDIA_BUS_FMT_SRGGB10_1X10 : +return imx334_write_regs (imx334, +raw10_framefmt_regs, + +ARRAY_SIZE (raw10_framefmt_regs));Please align to immediately right of the opening parenthesis. Same below.
drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 6 lines
drivers/media/i2c/imx334.c +6
-0+ +case MEDIA_BUS_FMT_SRGGB12_1X12 : +return imx334_write_regs (imx334, + raw12_framefmt_regs, + +ARRAY_SIZE (raw12_framefmt_regs));I think you'll also need changes to the pixel clock calculation.
Quoted 6 lines
Quoted 2 lines
In this driver pixel clock read only variable.
Pixel clock change maybe in different series.Please address it in this patch.
Is the link frequency affected by this patch as well?
I will try to modify my patch with the default link frequency available in the driver
Thanks,
Shravan
Quoted 5 lines
--
Kind regards,Sakari Ailus
Quoted 461 lines
-----Original Message-----
From: shravan Chippa - I35088
Sent: 01 October 2022 02:22 PM
To: Sakari Ailus <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: RE: [PATCH v4] media: i2c: imx334: support lower bandwidth modeQuoted 446 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 26 September 2022 10:21 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth mode[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Hi Shravan,
Quoted 14 lines · On Mon, Sep 26, 2022 at 11:32:31AM +0000, [email protected] wrote:
Quoted 14 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 20 September 2022 05:44 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth modeQuoted 6 lines
Quoted 6 lines
[Some people who received this message don't often get email from [email protected]. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
This looks like a mail system problem.
Quoted 401 lines
Quoted 370 lines
Hi Shravan,
Thanks for the patch.
drivers/media/i2c/imx334.c static const struct imx334_reg
Quoted 238 lines · shravan kumar
From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080 resolutions while leaving the existing configuration as default
CC Conor Dooley <[email protected]>Signed-off-by Prakash Battu <[email protected]>Signed-off-by Shravan Chippa <[email protected]>---
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format failsV2 -> V3
- Fixed the warning reported by kernel test robotV1 -> V2
- Addressed the review comment given by Jacopo Mondi, Which has bug inimx334_enum_frame_size()loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first--- drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- 1 file changed, 276 insertions(+), 26 deletions(-)(quoted diff) +0
-0
b/drivers/media/i2c/imx334.cindex 062125501788..df2f1821569e 100644drivers/media/i2c/imx334.c +166
-2@@ -79,7 +79,6 @@ struct imx334_reg_list {* struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height -* @code: Format code * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@ struct imx334_reg_list { struct imx334_mode { u32 width; u32 height; -u32 code; u32 hblank; u32 vblank; u32 vblank_min; @@ -119,6 +117,7 @@ struct imx334_mode {* @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls +* @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 {@@ -140,6 +139,7 @@ struct imx334 {u32 vblank;const struct imx334_mode *cur_mode;struct mutex mutex; +u32 cur_code;bool streaming; };@@ -147,6 +147,169 @@ static const s64 link_freq[] = { IMX334_LINK_FREQ, }; +/* Sensor mode registers */ +static const struct imx334_reg mode_1920x1080_regs[] = { + {0x3000 ,0x01 }, + {0x3018 ,0x04 }, + {0x3030 ,0xCA }, + {0x3031 ,0x08 }, + {0x3032 ,0x00 }, + {0x3034 ,0x4C }, + {0x3035 ,0x04 }, + {0x302C ,0xF0 }, + {0x302D ,0x03 }, + {0x302E ,0x80 }, + {0x302F ,0x07 }, + {0x3074 ,0xCC }, + {0x3075 ,0x02 }, + {0x308E ,0xCD }, + {0x308F ,0x02 }, + {0x3076 ,0x38 }, + {0x3077 ,0x04 }, + {0x3090 ,0x38 }, + {0x3091 ,0x04 }, + {0x3308 ,0x38 }, + {0x3309 ,0x04 }, + {0x30C6 ,0x00 }, + {0x30C7 ,0x00 }, + {0x30CE ,0x00 }, + {0x30CF ,0x00 }, + {0x30D8 ,0x18 }, + {0x30D9 ,0x0A }, + {0x304C ,0x00 }, + {0x304E ,0x00 }, + {0x304F ,0x00 }, + {0x3050 ,0x00 }, + {0x30B6 ,0x00 }, + {0x30B7 ,0x00 }, + {0x3116 ,0x08 }, + {0x3117 ,0x00 }, + {0x31A0 ,0x20 }, + {0x31A1 ,0x0F }, + {0x300C ,0x3B }, + {0x300D ,0x29 }, + {0x314C ,0x29 }, + {0x314D ,0x01 }, + {0x315A ,0x0A }, + {0x3168 ,0xA0 }, + {0x316A ,0x7E }, + {0x319E ,0x02 }, + {0x3199 ,0x00 }, + {0x319D ,0x00 }, + {0x31DD ,0x03 }, + {0x3300 ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, + {0x3A01 ,0x03 }, + {0x3A18 ,0x7F }, + {0x3A19 ,0x00 }, + {0x3A1A ,0x37 }, + {0x3A1B ,0x00 }, + {0x3A1C ,0x37 }, + {0x3A1D ,0x00 }, + {0x3A1E ,0xF7 }, + {0x3A1F ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x6F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x3F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x5F }, + {0x3A21 ,0x00 }, + {0x3A20 ,0x2F }, + {0x3A21 ,0x00 }, + {0x3078 ,0x02 }, + {0x3079 ,0x00 }, + {0x307A ,0x00 }, + {0x307B ,0x00 }, + {0x3080 ,0x02 }, + {0x3081 ,0x00 }, + {0x3082 ,0x00 }, + {0x3083 ,0x00 }, + {0x3088 ,0x02 }, + {0x3094 ,0x00 }, + {0x3095 ,0x00 }, + {0x3096 ,0x00 }, + {0x309B ,0x02 }, + {0x309C ,0x00 }, + {0x309D ,0x00 }, + {0x309E ,0x00 }, + {0x30A4 ,0x00 }, + {0x30A5 ,0x00 }, + {0x3288 ,0x21 }, + {0x328A ,0x02 }, + {0x3414 ,0x05 }, + {0x3416 ,0x18 }, + {0x35AC ,0x0E }, + {0x3648 ,0x01 }, + {0x364A ,0x04 }, + {0x364C ,0x04 }, + {0x3678 ,0x01 }, + {0x367C ,0x31 }, + {0x367E ,0x31 }, + {0x3708 ,0x02 }, + {0x3714 ,0x01 }, + {0x3715 ,0x02 }, + {0x3716 ,0x02 }, + {0x3717 ,0x02 }, + {0x371C ,0x3D }, + {0x371D ,0x3F }, + {0x372C ,0x00 }, + {0x372D ,0x00 }, + {0x372E ,0x46 }, + {0x372F ,0x00 }, + {0x3730 ,0x89 }, + {0x3731 ,0x00 }, + {0x3732 ,0x08 }, + {0x3733 ,0x01 }, + {0x3734 ,0xFE }, + {0x3735 ,0x05 }, + {0x375D ,0x00 }, + {0x375E ,0x00 }, + {0x375F ,0x61 }, + {0x3760 ,0x06 }, + {0x3768 ,0x1B }, + {0x3769 ,0x1B }, + {0x376A ,0x1A }, + {0x376B ,0x19 }, + {0x376C ,0x18 }, + {0x376D ,0x14 }, + {0x376E ,0x0F }, + {0x3776 ,0x00 }, + {0x3777 ,0x00 }, + {0x3778 ,0x46 }, + {0x3779 ,0x00 }, + {0x377A ,0x08 }, + {0x377B ,0x01 }, + {0x377C ,0x45 }, + {0x377D ,0x01 }, + {0x377E ,0x23 }, + {0x377F ,0x02 }, + {0x3780 ,0xD9 }, + {0x3781 ,0x03 }, + {0x3782 ,0xF5 }, + {0x3783 ,0x06 }, + {0x3784 ,0xA5 }, + {0x3788 ,0x0F }, + {0x378A ,0xD9 }, + {0x378B ,0x03 }, + {0x378C ,0xEB }, + {0x378D ,0x05 }, + {0x378E ,0x87 }, + {0x378F ,0x06 }, + {0x3790 ,0xF5 }, + {0x3792 ,0x43 }, + {0x3794 ,0x7A }, + {0x3796 ,0xA1 }, + {0x37B0 ,0x37 }, + {0x3E04 ,0x0E }, + {0x30E8 ,0x50 }, + {0x30E9 ,0x00 }, + {0x3E04 ,0x0E }, + {0x3002 ,0x00 }, +}; +/* Sensor mode registers */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000 ,0x01 },@@ -243,20 +406,56 @@ static const struct imx334_regmode_3840x2160_regs[] = {
drivers/media/i2c/imx334.c static int imx334_enum_mbus_code(struct
Quoted 69 lines
drivers/media/i2c/imx334.c +48
-12{0x3a00, 0x01}, }; +static const struct imx334_reg raw10_framefmt_regs[] = { + {0x3050 ,0x00 }, + {0x319D ,0x00 }, + {0x341C ,0xFF }, + {0x341D ,0x01 }, +}; + +static const struct imx334_reg raw12_framefmt_regs[] = { + {0x3050 ,0x01 }, + {0x319D ,0x01 }, + {0x341C ,0x47 }, + {0x341D ,0x00 }, +}; + +/* +* The supported BUS formats. +*/ +static const u32 imx334_mbus_codes[] = { +MEDIA_BUS_FMT_SRGGB12_1X12 , +MEDIA_BUS_FMT_SRGGB10_1X10 , }; + /* Supported sensor mode configurations */ -static const structimx334_mode supported_mode = { - .width =3840 , - .height =2160 , - .hblank =560 , - .vblank =2340 , - .vblank_min =90 , - .vblank_max =132840 , - .pclk =594000000 , - .link_freq_idx =0 , - .code =MEDIA_BUS_FMT_SRGGB12_1X12 , - .reg_list = { - .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), - .regs = mode_3840x2160_regs, +static const struct imx334_mode supported_modes[] = { + { + .width =3840 , + .height =2160 , + .hblank =560 , + .vblank =2340 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_3840x2160_regs), + .regs = mode_3840x2160_regs, + }, + }, { + .width =1920 , + .height =1080 , + .hblank =560 , + .vblank =1170 , + .vblank_min =90 , + .vblank_max =132840 , + .pclk =594000000 , + .link_freq_idx =0 , + .reg_list = { + .num_of_regs =ARRAY_SIZE (mode_1920x1080_regs), + .regs = mode_1920x1080_regs, + }, }, };@@ -506,10 +705,10 @@ static int imx334_enum_mbus_code(struct
v4l2_subdev*sd,drivers/media/i2c/imx334.c static int imx334_enum_frame_size(struct
Quoted 13 lines
drivers/media/i2c/imx334.c +2
-2struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { - if (code->index > 0) + if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) return -EINVAL; - code->code = supported_mode.code; + code->code = imx334_mbus_codes[code->index];return 0 ; }@@ -526,15 +725,22 @@ static int imx334_enum_frame_size(struct
v4l2_subdev*sd,Quoted 41 lines
drivers/media/i2c/imx334.c +0
-0struct v4l2_subdev_state *sd_state, struct
v4l2_subdev_frame_size_enum
*fsize) {drivers/media/i2c/imx334.c +14
-5-if (fsize->index >0 ) +unsigned int i; + +if (fsize->index >=ARRAY_SIZE (supported_modes))return -EINVAL ; -if (fsize->code != supported_mode.code) +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); ++i) { +if (imx334_mbus_codes[i] == fsize->code) +break ; + } + +if (i ==ARRAY_SIZE (imx334_mbus_codes))return -EINVAL ; - fsize->min_width = supported_mode.width; + fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; - fsize->min_height = supported_mode.height; + fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height;return 0 ;@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334, { fmt->format.width = mode->width; fmt->format.height = mode->height; - fmt->format.code = mode->code; + fmt->format.code = imx334->cur_code; fmt->format.field =V4L2_FIELD_NONE ; fmt->format.colorspace =V4L2_COLORSPACE_RAW ; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6 +797,21 @@ static int imx334_get_pad_format(struct v4l2_subdev +*sd, return 0; }Quoted 8 lines
drivers/media/i2c/imx334.c static int imx334_get_pad_format(struct v4l2_subdev *sd, · line 805
Quoted 6 lines
drivers/media/i2c/imx334.c +6
-0+static int imx334_get_format_code (struct imx334 *imx334,struct +v4l2_subdev_format *fmt) { +unsigned int i; + +for (i =0 ; i <ARRAY_SIZE (imx334_mbus_codes); i++) { +if (imx334_mbus_codes[i] == fmt->format.code)If you return here, you can remove the check below.
This function taken ref from imx219 driver. And suggested by given by Jacopo Mondi Change in v2
Quoted 21 lines
Quoted 17 lines
drivers/media/i2c/imx334.c +9
-0+break ; + } + +if (i >=ARRAY_SIZE (imx334_mbus_codes)) + i =0 ; + +return imx334_mbus_codes[i]; } +/** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure @@ -609,7 +830,13 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
mutex_lock(&imx334->mutex);drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 833
Quoted 2 lines
drivers/media/i2c/imx334.c +1
-1- mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt);This should be done only for the active format.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Are you expecting if condition to check the current bus code with
set_pad_fromatbus code?Only assign the
cur_codefield when setting the active format.I have taken reference from imx219 driver
cur_codewill update if the requested format bus code maches with availablebus_codeslist if not mached with availablebus_codesit will use defaults one only.
am I missing any thing here ?
R u expecting to change the current bus code when get the V4L2_SUBDEV_FORMAT_ACTIVE requested? I will try to modify in the next revision this case.
Thanks,
Shravan
Quoted 73 lines
Quoted 56 lines
Quoted 14 lines
Quoted 14 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd,
Quoted 13 lines
drivers/media/i2c/imx334.c +8
-0+ + mode =v4l2_find_nearest_size (supported_modes, +ARRAY_SIZE (supported_modes), + width, height, + fmt->format.width, + fmt->format.height); +imx334_fill_pad_format (imx334, mode, fmt); if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +844 ,7 @@
Quoted 6 lines
Quoted 6 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 847
Quoted 6 lines
static int imx334_set_pad_format(struct
v4l2_subdev*sd,framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); *framefmt = fmt->format;drivers/media/i2c/imx334.c +1
-1- }else { + }else if (imx334->cur_mode != mode) {The mbus code no longer defines the mode. I think you'll need to take this into account (pixel rate and link frequency?).
Quoted 32 lines
Quoted 32 lines
Quoted 7 lines
ret = imx334_update_controls(imx334, mode); if (!ret) imx334->cur_mode = mode; @@ -642,11+869,26 @@ static int imx334_init_pad_cfg(struct
v4l2_subdev*sd,
structv4l2_subdev_formatfmt = { 0 };fmt.which =
sd_state?V4L2_SUBDEV_FORMAT_TRY:
V4L2_SUBDEV_FORMAT_ACTIVE;drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 12 lines
drivers/media/i2c/imx334.c +8
-1-imx334_fill_pad_format (imx334, &supported_mode, &fmt); +imx334_fill_pad_format (imx334, &supported_modes[0 ], &fmt);return imx334_set_pad_format (sd, sd_state, &fmt); } +static int imx334_set_framefmt (struct imx334 *imx334) { +switch (imx334->cur_code) { +case MEDIA_BUS_FMT_SRGGB10_1X10 : +return imx334_write_regs (imx334, +raw10_framefmt_regs, + +ARRAY_SIZE (raw10_framefmt_regs));Please align to immediately right of the opening parenthesis. Same below.
drivers/media/i2c/imx334.c static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
Quoted 6 lines
drivers/media/i2c/imx334.c +6
-0+ +case MEDIA_BUS_FMT_SRGGB12_1X12 : +return imx334_write_regs (imx334, + raw12_framefmt_regs, + +ARRAY_SIZE (raw12_framefmt_regs));I think you'll also need changes to the pixel clock calculation.
Quoted 6 lines
Quoted 2 lines
In this driver pixel clock read only variable.
Pixel clock change maybe in different series.Please address it in this patch.
Is the link frequency affected by this patch as well?
I will try to modify my patch with the default link frequency available in the driver
Thanks,
ShravanQuoted 5 lines
--
Kind regards,Sakari Ailus
Quoted 12 lines · On Sun, Oct 02, 2022 at 04:42:06AM +0000, [email protected] wrote:
Quoted 12 lines
Quoted 12 lines
Quoted 10 lines
Quoted 9 lines
drivers/media/i2c/imx334.c static int imx334_set_pad_format(struct v4l2_subdev *sd, · line 833
Quoted 7 lines
+830,13 @@ static int imx334_set_pad_format(struct
v4l2_subdev*sd,mutex_lock(&imx334->mutex);drivers/media/i2c/imx334.c +1
-1- mode = &supported_mode; + imx334->cur_code =imx334_get_format_code (imx334, fmt);This should be done only for the active format.
Are you expecting if condition to check the current bus code with
set_pad_fromatbus code?
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Only assign the
cur_codefield when setting the active format.I have taken reference from imx219 driver
cur_codewill update if the requested format bus code maches with availablebus_codeslist if not mached with availablebus_codesit will use defaults one only.
am I missing any thing here ?R u expecting to change the current bus code when get the
V4L2_SUBDEV_FORMAT_ACTIVErequested? I will try to modify in the next revision this case.
Yes, please.
Signature · 1 line
Sakari Ailus
Quoted 8 lines · On Sat, Oct 01, 2022 at 08:51:46AM +0000, [email protected] wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Review
Quoted 5 lines
(quoted diff) +5
-0+ case MEDIA_BUS_FMT_SRGGB12_1X12: + return imx334_write_regs(imx334, + raw12_framefmt_regs, + + ARRAY_SIZE(raw12_framefmt_regs));I think you'll also need changes to the pixel clock calculation.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
In this driver pixel clock read only variable.
Pixel clock change maybe in different series.Please address it in this patch.
Is the link frequency affected by this patch as well?
I will try to modify my patch with the default link frequency available in the driver
Also check the frequencies the driver enables will be available in link-frequencies.
Signature · 1 line
Sakari Ailus
Quoted 29 lines
-----Original Message-----
From: Sakari Ailus <[email protected]>
Sent: 02 October 2022 05:59 PM
To: shravan Chippa - I35088 <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; linux- [email protected]; Conor Dooley - M52691 <[email protected]>; Battu Prakash Reddy - I30399 <[email protected]>
Subject: Re: [PATCH v4] media: i2c: imx334: support lower bandwidth modeEXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Quoted 13 lines · On Sat, Oct 01, 2022 at 08:51:46AM +0000, [email protected] wrote:
Quoted 13 lines
Quoted 10 lines
Quoted 8 lines
Review
Quoted 5 lines
(quoted diff) +5
-0+ case MEDIA_BUS_FMT_SRGGB12_1X12: + return imx334_write_regs(imx334, + raw12_framefmt_regs, + + ARRAY_SIZE(raw12_framefmt_regs));I think you'll also need changes to the pixel clock calculation.
In this driver pixel clock read only variable.
Pixel clock change maybe in different series.Please address it in this patch.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Is the link frequency affected by this patch as well?
I will try to modify my patch with the default link frequency available in the driver
Also check the frequencies the driver enables will be available in link- frequencies.
This patch is not affecting the default link frequency 891Mbps with input clock frequency (24Mhz) I have cross-checked with the present supported 3840x2160 resolution and imx334 UG.
Thanks,
Shravan
Quoted 3 lines
--
Sakari Ailus