scsi: wd33c93: remove dead code related to the long-gone config WD33C93_PIO
Subsystems (2)
PATCH 1/1 scsi: wd33c93: remove dead code related to the long-gone config WD33C93_PIO
The historical commit 5e018f7e60c9 ("Remove PC9800 support") from 2004 in linux's history.git removed the config WD33C93_PIO to tweak the scsi wd33c93 driver for the PC9800.
Some dead code in drivers/scsi/wd33c93.[ch] under an ifdef WD33C93_PIO continued to remain in the repository until now.
Remove this dead code.
This issue was discovered with ./scripts/checkkconfigsymbols.py.
Signed-off-by Lukas Bulwahn <[email protected]>
--- drivers/scsi/wd33c93.c | 60 ------------------------------------------ drivers/scsi/wd33c93.h | 5 ---- 2 files changed, 65 deletions(-)
drivers/scsi/wd33c93.c +0 -60
@@ -162,65 +162,6 @@ module_param(setup_strings, charp, 0);static void wd33c93_execute (struct Scsi_Host *instance); -#ifdef CONFIG_WD33C93_PIO -static inline uchar -read_wd33c93 (const wd33c93_regs regs,uchar reg_num) -{ -uchar data; - -outb (reg_num, regs.SASR); - data =inb (regs.SCMD); -return data; -} - -static inline unsigned long -read_wd33c93_count (const wd33c93_regs regs) -{ -unsigned long value; - -outb (WD_TRANSFER_COUNT_MSB , regs.SASR); - value =inb (regs.SCMD) <<16 ; - value |=inb (regs.SCMD) <<8 ; - value |=inb (regs.SCMD); -return value; -} - -static inline uchar -read_aux_stat (const wd33c93_regs regs) -{ -return inb (regs.SASR); -} - -static inline void -write_wd33c93 (const wd33c93_regs regs,uchar reg_num,uchar value) -{ -outb (reg_num, regs.SASR); -outb (value, regs.SCMD); -} - -static inline void -write_wd33c93_count (const wd33c93_regs regs,unsigned long value) -{ -outb (WD_TRANSFER_COUNT_MSB , regs.SASR); -outb ((value >>16 ) &0xff , regs.SCMD); -outb ((value >>8 ) &0xff , regs.SCMD); -outb ( value &0xff , regs.SCMD); -} - -#define write_wd33c93_cmd (regs, cmd) \ - write_wd33c93((regs), WD_COMMAND, (cmd)) - -static inline void -write_wd33c93_cdb (const wd33c93_regs regs,uint len,uchar cmnd[]) -{ -int i; - -outb (WD_CDB_1 , regs.SASR); -for (i=0 ; i<len; i++) -outb (cmnd[i], regs.SCMD); -} - -#else /* CONFIG_WD33C93_PIO */ static inline uchar read_wd33c93 (const wd33c93_regs regs,uchar reg_num) {
@@ -287,7 +228,6 @@ write_wd33c93_cdb(const wd33c93_regs regs, uint len, uchar cmnd[])for (i =0 ; i < len; i++) *regs.SCMD = cmnd[i]; } -#endif /* CONFIG_WD33C93_PIO */ static inline uchar read_1_byte (const wd33c93_regs regs)
drivers/scsi/wd33c93.h +0 -5
@@ -180,13 +180,8 @@/* This is what the 3393 chip looks like to us */ typedef struct { -#ifdef CONFIG_WD33C93_PIO -unsigned int SASR; -unsigned int SCMD; -#else volatile unsigned char *SASR;volatile unsigned char *SCMD; -#endif }wd33c93_regs ;
Signature · 1 line
2.17.1
Martin K. Petersen
AppliedLukas,
Quoted 3 lines
The historical commit
5e018f7e60c9("Remove PC9800 support") from 2004 in linux's history.git removed the configWD33C93_PIOto tweak the scsi wd33c93 driver for the PC9800.
Applied to 6.1/scsi-staging, thanks!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering