Qualcomm ARM DTS updates for 6.1

The following changes since commit 568035b01cfb107af8d2e4bd2fb9aea22cf5b868:

Linux 6.0-rc1 (2022-08-14 15:50:18 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-6.1

for you to fetch changes up to 5cbd20166f0ac7ae0272d25401b6ec5472482a19:

ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP (2022-09-15 13:44:42 -0500)

----------------------------------------------------------------
Qualcomm ARM DTS updates for 6.1

This adds extends the IPQ8064 support with the two variants IPQ8062 and IPQ8065. MSM8974 and APQ8084 gained RPM stats support.

The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS ZenWatch 2 and LG G Watch R.

MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got the TMA340 Touchscreen described.

A wide range of improvements are done throughout the DTS files to align with bindings, fix issues and improve structure on things.

----------------------------------------------------------------
Christian Marangi (5):
ARM: dts: qcom: ipq8064: add v2 dtsi variant
ARM: dts: qcom: ipq8064: add ipq8062 variant
ARM: dts: qcom: ipq8064: add ipq8065 variant
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: ipq8064: pad addresses to 8 digit

Dmitry Baryshkov (12):
ARM: dts: qcom: apq8084: add rpm-stats device node
ARM: dts: qcom: msm8974: add rpm-stats device node
ARM: dts: qcom: stop using snps,dw-pcie falback
ARM: dts: qcom-*: replace deprecated perst-gpio with perst-gpios
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the MMCC device node

Krzysztof Kozlowski (12):
ARM: dts: qcom: msm8960: override nodes by label
ARM: dts: qcom: msm8226: override nodes by label
ARM: dts: qcom: msm8660: override nodes by label
ARM: dts: qcom: msm8660-surf: move fixed regulator out of soc
ARM: dts: qcom: use GPIO flags for tlmm
ARM: dts: qcom: align SPMI PMIC ADC node name with dtschema
ARM: dts: qcom: pm8941: align SPMI PMIC LPG node name with dtschema
ARM: dts: qcom: pmx55: align SPMI PMIC Power-on node name with dtschema
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: align SDHCI clocks with DT schema

Linus Walleij (3):
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard

Luca Weiss (3):
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP

 arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts    |   6 +
 arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts        |  13 +
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts     |  71 +-
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts        |   2 +-
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   2 +-
 arch/arm/boot/dts/qcom-apq8064.dtsi                |  37 +-
 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts     |   3 +-
 arch/arm/boot/dts/qcom-apq8084.dtsi                |  32 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi      |   3 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi      |   4 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts    |   5 +-
 arch/arm/boot/dts/qcom-ipq4019.dtsi                |   7 +-
 arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi         |  37 +
 arch/arm/boot/dts/qcom-ipq8062.dtsi                |   8 +
 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi    |  37 +
 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi           |  69 ++
 arch/arm/boot/dts/qcom-ipq8064.dtsi                | 773 ++++++++++-----------
 arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi         |  37 +
 arch/arm/boot/dts/qcom-ipq8065.dtsi                |   8 +
 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts  |   6 +-
 arch/arm/boot/dts/qcom-msm8226.dtsi                | 103 ++-
 arch/arm/boot/dts/qcom-msm8660-surf.dts            |  57 +-
 arch/arm/boot/dts/qcom-msm8660.dtsi                |  62 +-
 arch/arm/boot/dts/qcom-msm8960-cdp.dts             | 623 +++++++++--------
 arch/arm/boot/dts/qcom-msm8960.dtsi                |  45 +-
 .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     |   2 +-
 arch/arm/boot/dts/qcom-msm8974.dtsi                |  29 +-
 arch/arm/boot/dts/qcom-msm8974pro.dtsi             |   6 +-
 arch/arm/boot/dts/qcom-pm8941.dtsi                 |   4 +-
 arch/arm/boot/dts/qcom-pma8084.dtsi                |   2 +-
 arch/arm/boot/dts/qcom-pmx55.dtsi                  |   2 +-
 arch/arm/boot/dts/qcom-sdx65.dtsi                  |   2 +-
 32 files changed, 1284 insertions(+), 813 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8062.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi