Enable notify VM exit
v7 cover Enable notify VM exit
Notify VM exit is introduced to mitigate the potential DOS attach from malicious VM. This series is the userspace part to enable this feature through a new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT. The detailed info can be seen in Patch 2.
The corresponding KVM support can be found in linux 6.0-rc:
(2f4073e08f4c KVM: VMX: Enable Notify VM exit)
This patch set depends on some definition which can be updated from scripts/update-linux-headers.sh. The corresponding separate patch set is available at:
https://lists.gnu.org/archive/html/qemu-devel/2022-09/msg02102.html
---
Change logs:
v6 -> v7
- Add a warning message when exiting to userspace (Peter Xu)
- v6: https://lore.kernel.org/all/[email protected]/
v5 -> v6
- Add some info related to the valid range of notify_window in patch 2. (Peter Xu)
- Add the doc in qemu-options.hx. (Peter Xu)
- v5: https://lore.kernel.org/qemu-devel/[email protected]/
v4 -> v5
- Remove the assert check to avoid the nop in NDEBUG case. (Yuan)
- v4: https://lore.kernel.org/qemu-devel/[email protected]/
v3 -> v4
- Add a new KVM cap KVM_CAP_TRIPLE_FAULT_EVENT to guard the extension of triple fault event save&restore.
- v3: https://lore.kernel.org/qemu-devel/[email protected]/
---
Chenyi Qiang (2):
i386: kvm: extend kvm_{get, put}_vcpu_events to support pending triple
fault
i386: Add notify VM exit support
hw/i386/x86.c | 45 ++++++++++++++++++++++++++++++++++++ include/hw/i386/x86.h | 5 ++++ qemu-options.hx | 10 +++++++- target/i386/cpu.c | 1 + target/i386/cpu.h | 1 + target/i386/kvm/kvm.c | 54 +++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 115 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.1
PATCH v7 1/2 i386: kvm: extend kvm_{get, put}_vcpu_events to support pending triple fault
For the direct triple faults, i.e. hardware detected and KVM morphed to VM-Exit, KVM will never lose them. But for triple faults sythesized by KVM, e.g. the RSM path, if KVM exits to userspace before the request is serviced, userspace could migrate the VM and lose the triple fault.
A new flag KVM_VCPUEVENT_VALID_TRIPLE_FAULT is defined to signal that the event.triple_fault_pending field contains a valid state if the KVM_CAP_X86_TRIPLE_FAULT_EVENT capability is enabled.
--- target/i386/cpu.c | 1 + target/i386/cpu.h | 1 + target/i386/kvm/kvm.c | 20 ++++++++++++++++++++ 3 files changed, 22 insertions(+)
target/i386/cpu.c +1 -0
@@ -6017,6 +6017,7 @@ static void x86_cpu_reset(DeviceState *dev) env->exception_has_payload = false; env->exception_payload =0 ; env->nmi_injected = false; + env->triple_fault_pending = false;#if !defined(CONFIG_USER_ONLY )/* We hard-wire the BSP to the first CPU. */ apic_designate_bsp (cpu->apic_state, s->cpu_index ==0 );
target/i386/cpu.h +1 -0
@@ -1739,6 +1739,7 @@ typedef struct CPUArchState {uint8_t has_error_code;uint8_t exception_has_payload;uint64_t exception_payload; +bool triple_fault_pending;uint32_t ins_len;uint32_t sipi_vector;bool tsc_valid;
target/i386/kvm/kvm.c +20 -0
@@ -132,6 +132,7 @@ static int has_xcrs;static int has_pit_state2;static int has_sregs2;static int has_exception_payload; +static int has_triple_fault_event;static bool has_msr_mcg_ext_ctl;
@@ -2483,6 +2484,16 @@ int kvm_arch_init(MachineState *ms, KVMState *s) } } + has_triple_fault_event =kvm_check_extension (s,KVM_CAP_X86_TRIPLE_FAULT_EVENT ); +if (has_triple_fault_event) { + ret =kvm_vm_enable_cap (s,KVM_CAP_X86_TRIPLE_FAULT_EVENT ,0 , true); +if (ret <0 ) { +error_report ("kvm: Failed to enable triple fault event cap: %s" , +strerror (-ret)); +return ret; + } + } + ret =kvm_get_supported_msrs (s);if (ret <0 ) {return ret;
@@ -4299,6 +4310,11 @@ static int kvm_put_vcpu_events(X86CPU *cpu, int level) } } +if (has_triple_fault_event) { + events.flags |=KVM_VCPUEVENT_VALID_TRIPLE_FAULT ; + events.triple_fault.pending = env->triple_fault_pending; + } +return kvm_vcpu_ioctl (CPU (cpu),KVM_SET_VCPU_EVENTS , &events); }
@@ -4368,6 +4384,10 @@ static int kvm_get_vcpu_events(X86CPU *cpu) } } +if (events.flags &KVM_VCPUEVENT_VALID_TRIPLE_FAULT ) { + env->triple_fault_pending = events.triple_fault.pending; + } + env->sipi_vector = events.sipi_vector;return 0 ;
Signature · 1 line
2.17.1
Paolo Bonzini
maintainerRe: [PATCH v7 1/2] i386: kvm: extend kvm_{get, put}_vcpu_events to support pending triple fault
Quoted 8 lines · Chenyi Qiang
For the direct triple faults, i.e. hardware detected and KVM morphed to VM-Exit, KVM will never lose them. But for triple faults sythesized by KVM, e.g. the RSM path, if KVM exits to userspace before the request is serviced, userspace could migrate the VM and lose the triple fault.
A new flag
KVM_VCPUEVENT_VALID_TRIPLE_FAULTis defined to signal that the event.triple_fault_pending field contains a valid state if theKVM_CAP_X86_TRIPLE_FAULT_EVENTcapability is enabled.
Note that you are not transmitting the field on migration. You need this on top:
target/i386/cpu.h +1 -1
@@ -1739,7 +1739,7 @@ typedef struct CPUArchState {uint8_t has_error_code;uint8_t exception_has_payload;uint64_t exception_payload; -bool triple_fault_pending; +uint8_t triple_fault_pending;uint32_t ins_len;uint32_t sipi_vector;bool tsc_valid;
target/i386/machine.c +20 -0
@@ -1562,6 +1562,25 @@ static const VMStateDescription vmstate_arch_lbr = { } }; +static bool triple_fault_needed (void *opaque) +{ +X86CPU *cpu = opaque; +CPUX86State *env = &cpu->env; + +return env->triple_fault_pending; +} + +static const VMStateDescription vmstate_triple_fault = { + .name ="cpu/triple_fault" , + .version_id =1 , + .minimum_version_id =1 , + .needed = triple_fault_needed, + .fields = (VMStateField []) { +VMSTATE_UINT8 (env.triple_fault_pending,X86CPU ), +VMSTATE_END_OF_LIST () + } +}; +const VMStateDescription vmstate_x86_cpu = { .name ="cpu" , .version_id =12 ,
@@ -1706,6 +1725,7 @@ const VMStateDescription vmstate_x86_cpu = { &vmstate_amx_xtile, #endif &vmstate_arch_lbr, + &vmstate_triple_fault,NULL } };
Re: [PATCH v7 1/2] i386: kvm: extend kvm_{get, put}_vcpu_events to support pending triple fault
Quoted 57 lines · Paolo Bonzini
Quoted 8 lines · Chenyi Qiang
For the direct triple faults, i.e. hardware detected and KVM morphed to VM-Exit, KVM will never lose them. But for triple faults sythesized by KVM, e.g. the RSM path, if KVM exits to userspace before the request is serviced, userspace could migrate the VM and lose the triple fault.
A new flag
KVM_VCPUEVENT_VALID_TRIPLE_FAULTis defined to signal that the event.triple_fault_pending field contains a valid state if theKVM_CAP_X86_TRIPLE_FAULT_EVENTcapability is enabled.Note that you are not transmitting the field on migration. You need this on top:
target/i386/cpu.h +1
-1@@ -1739,7 +1739,7 @@ typedef struct CPUArchState { uint8_t has_error_code; uint8_t exception_has_payload; uint64_t exception_payload; - bool triple_fault_pending; + uint8_t triple_fault_pending; uint32_t ins_len; uint32_t sipi_vector; bool tsc_valid;target/i386/machine.c +19
-0@@ -1562,6 +1562,25 @@ static const VMStateDescription vmstate_arch_lbr = { } }; +static bool triple_fault_needed (void *opaque) +{ + X86CPU *cpu = opaque; + CPUX86State *env = &cpu->env; + + return env->triple_fault_pending; +} + +static const VMStateDescription vmstate_triple_fault = { + .name = "cpu/triple_fault", + .version_id = 1, + .minimum_version_id = 1, + .needed = triple_fault_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT8(env.triple_fault_pending, X86CPU), + VMSTATE_END_OF_LIST() + } +}; + const VMStateDescription vmstate_x86_cpu = { .name = "cpu", .version_id = 12,
target/i386/machine.c const VMStateDescription vmstate_x86_cpu = { · line 1731
Quoted 7 lines
target/i386/machine.c +1
-0@@ -1706,6 +1725,7 @@ const VMStateDescription vmstate_x86_cpu = { &vmstate_amx_xtile, #endif &vmstate_arch_lbr, + &vmstate_triple_fault, NULL } };
Thanks Paolo for your review!
I'll add this in next version.
Quoted 1 line
PATCH v7 2/2 i386: Add notify VM exit support
In reply to Chenyi QiangThere are cases that malicious virtual machine can cause CPU stuck (due to event windows don't open up), e.g., infinite loop in microcode when nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and IRQ) can be delivered. It leads the CPU to be unavailable to host or other VMs. Notify VM exit is introduced to mitigate such kind of attacks, which will generate a VM exit if no event window occurs in VM non-root mode for a specified amount of time (notify window).
A new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT is exposed to user space so that the user can query the capability and set the expected notify window when creating VMs. The format of the argument when enabling this capability is as follows:
Bit 63:32 - notify window specified in qemu command
Bit 31:0 - some flags (e.g. KVM_X86_NOTIFY_VMEXIT_ENABLED is set to
enable the feature.)
Because there are some concerns, e.g. a notify VM exit may happen with VM_CONTEXT_INVALID set in exit qualification (no cases are anticipated that would set this bit), which means VM context is corrupted. To avoid the false positive and a well-behaved guest gets killed, make this feature disabled by default. Users can enable the feature by a new machine property:
qemu -machine notify_vmexit=on,notify_window=0 ...
Note that notify_window is only valid when notify_vmexit is on. The valid range of notify_window is non-negative. It is even safe to set it to zero since there's an internal hardware threshold to be added to ensure no false positive.
A new KVM exit reason KVM_EXIT_NOTIFY is defined for notify VM exit. If it happens with VM_INVALID_CONTEXT, hypervisor exits to user space to inform the fatal case. Then user space can inject a SHUTDOWN event to the target vcpu. This is implemented by injecting a sythesized triple fault event.
--- hw/i386/x86.c | 45 +++++++++++++++++++++++++++++++++++++++++++ include/hw/i386/x86.h | 5 +++++ qemu-options.hx | 10 +++++++++- target/i386/kvm/kvm.c | 34 ++++++++++++++++++++++++++++++++ 4 files changed, 93 insertions(+), 1 deletion(-)
hw/i386/x86.c +45 -0
@@ -1379,6 +1379,37 @@ static void machine_set_sgx_epc(Object *obj, Visitor *v, const char *name,qapi_free_SgxEPCList (list); } +static bool x86_machine_get_notify_vmexit (Object *obj,Error **errp) +{ +X86MachineState *x86ms =X86_MACHINE (obj); + +return x86ms->notify_vmexit; +} + +static void x86_machine_set_notify_vmexit (Object *obj,bool value,Error **errp) +{ +X86MachineState *x86ms =X86_MACHINE (obj); + + x86ms->notify_vmexit = value; +} + +static void x86_machine_get_notify_window (Object *obj,Visitor *v, +const char *name,void *opaque,Error **errp) +{ +X86MachineState *x86ms =X86_MACHINE (obj); +uint32_t notify_window = x86ms->notify_window; + +visit_type_uint32 (v, name, ¬ify_window, errp); +} + +static void x86_machine_set_notify_window (Object *obj,Visitor *v, +const char *name,void *opaque,Error **errp) +{ +X86MachineState *x86ms =X86_MACHINE (obj); + +visit_type_uint32 (v, name, &x86ms->notify_window, errp); +} +static void x86_machine_initfn (Object *obj) {X86MachineState *x86ms =X86_MACHINE (obj);
@@ -1392,6 +1423,8 @@ static void x86_machine_initfn(Object *obj) x86ms->oem_table_id =g_strndup (ACPI_BUILD_APPNAME8 ,8 ); x86ms->bus_lock_ratelimit =0 ; x86ms->above_4g_mem_start =4 * GiB; + x86ms->notify_vmexit = false; + x86ms->notify_window =0 ; }static void x86_machine_class_init (ObjectClass *oc,void *data)
@@ -1461,6 +1494,18 @@ static void x86_machine_class_init(ObjectClass *oc, void *data) NULL, NULL);object_class_property_set_description (oc,"sgx-epc" ,"SGX EPC device" ); + +object_class_property_add (oc,X86_MACHINE_NOTIFY_WINDOW ,"uint32_t" , + x86_machine_get_notify_window, + x86_machine_set_notify_window,NULL ,NULL ); +object_class_property_set_description (oc,X86_MACHINE_NOTIFY_WINDOW , +"Set the notify window required by notify VM exit" ); + +object_class_property_add_bool (oc,X86_MACHINE_NOTIFY_VMEXIT , + x86_machine_get_notify_vmexit, + x86_machine_set_notify_vmexit); +object_class_property_set_description (oc,X86_MACHINE_NOTIFY_VMEXIT , +"Enable notify VM exit" ); }static const TypeInfo x86_machine_info = {
include/hw/i386/x86.h +5 -0
@@ -85,6 +85,9 @@ struct X86MachineState {* which means no limitation on the guest's bus locks. */ uint64_t bus_lock_ratelimit; + +bool notify_vmexit; +uint32_t notify_window; };#define X86_MACHINE_SMM "smm"
@@ -94,6 +97,8 @@ struct X86MachineState {#define X86_MACHINE_OEM_ID "x-oem-id"#define X86_MACHINE_OEM_TABLE_ID "x-oem-table-id"#define X86_MACHINE_BUS_LOCK_RATELIMIT "bus-lock-ratelimit" +#define X86_MACHINE_NOTIFY_VMEXIT "notify-vmexit" +#define X86_MACHINE_NOTIFY_WINDOW "notify-window"#define TYPE_X86_MACHINE MACHINE_TYPE_NAME("x86")OBJECT_DECLARE_TYPE (X86MachineState, X86MachineClass,X86_MACHINE )
qemu-options.hx +9 -1
@@ -37,7 +37,8 @@ DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ " memory-encryption=@var{} memory encryption object to use (default=none)\n" " hmat=on|off controls ACPI HMAT support (default=off)\n" " memory-backend='backend-id' specifies explicitly provided backend for main RAM (default=none)\n" - " cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.interleave-granularity=granularity]\n", + " cxl-fmw.0.targets.0=firsttarget,cxl-fmw.0.targets.1=secondtarget,cxl-fmw.0.size=size[,cxl-fmw.0.interleave-granularity=granularity]\n" + " notify_vmexit=on|off,notify_window=n controls notify VM exit support (default=off) and specifies the notify window size (default=0)\n", QEMU_ARCH_ALL) SRST ``-machine [type=]name[,prop=value[,...]]``
@@ -157,6 +158,13 @@ SRST :: -machine cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=128G,cxl-fmw.0.interleave-granularity=512k + + ``notify_vmexit=on|off,notify_window=n`` + Enables or disables Notify VM exit support on x86 host and specify + the corresponding notify window to trigger the VM exit if enabled. + This feature can mitigate the CPU stuck issue due to event windows + don't open up for a specified of time (notify window). + The default is off. ERST DEF("M", HAS_ARG, QEMU_OPTION_M,
target/i386/kvm/kvm.c +34 -0
@@ -2597,6 +2597,21 @@ int kvm_arch_init(MachineState *ms, KVMState *s)ratelimit_set_speed (&bus_lock_ratelimit_ctrl, x86ms->bus_lock_ratelimit,BUS_LOCK_SLICE_TIME ); } + +if (x86ms->notify_vmexit && +kvm_check_extension (s,KVM_CAP_X86_NOTIFY_VMEXIT )) { +uint64_t notify_window_flags = + ((uint64_t )x86ms->notify_window <<32 ) | +KVM_X86_NOTIFY_VMEXIT_ENABLED | +KVM_X86_NOTIFY_VMEXIT_USER ; + ret =kvm_vm_enable_cap (s,KVM_CAP_X86_NOTIFY_VMEXIT ,0 , + notify_window_flags); +if (ret <0 ) { +error_report ("kvm: Failed to enable notify vmexit cap: %s" , +strerror (-ret)); +return ret; + } + } }return 0 ;
@@ -5141,6 +5156,8 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)X86CPU *cpu =X86_CPU (cs);uint64_t code;int ret; +struct kvm_vcpu_events events = {}; +bool ctx_invalid;switch (run->exit_reason) {case KVM_EXIT_HLT :
@@ -5196,6 +5213,23 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)/* already handled in kvm_arch_post_run */ ret =0 ;break ; +case KVM_EXIT_NOTIFY : + ctx_invalid = !!(run->notify.flags &KVM_NOTIFY_CONTEXT_INVALID ); + ret =0 ; +warn_report_once ("KVM: encounter a notify exit with %svalid context in" +" guest. It means there can be possible misbehaves in" +" guest, please have a look." , + ctx_invalid ?"in" :"" ); +if (ctx_invalid) { +if (has_triple_fault_event) { + events.flags |=KVM_VCPUEVENT_VALID_TRIPLE_FAULT ; + events.triple_fault.pending = true; + ret =kvm_vcpu_ioctl (cs,KVM_SET_VCPU_EVENTS , &events); + }else { + ret =-1 ; + } + } +break ;default :fprintf (stderr,"KVM: unknown exit reason %d\n" , run->exit_reason); ret =-1 ;
Signature · 1 line
2.17.1
Paolo Bonzini
maintainerRe: [PATCH v7 2/2] i386: Add notify VM exit support
Quoted 7 lines · Chenyi Qiang
Because there are some concerns, e.g. a notify VM exit may happen with
VM_CONTEXT_INVALIDset in exit qualification (no cases are anticipated that would set this bit), which means VM context is corrupted. To avoid the false positive and a well-behaved guest gets killed, make this feature disabled by default. Users can enable the feature by a new machine property:
qemu -machine notify_vmexit=on,notify_window=0 ...
Some comments on the interface:
- the argument should be one of "run" (i.e. do nothing and continue, the default), "internal-error" (i.e. raise a KVM internal error), "disable" (i.e. do not enable the capability). You can add the enum to qapi/runstate.json and use object_class_property_add_enum to define the QOM property.
- properties should have a dash ("-") in the name, not an underscore
- the property should be added to "-accel kvm,..." (on x86 only). See after my signature for a preparatory patch that adds a new kvm_arch_accel_class_init hook.
The default would be either "run" or "disable". Honestly I think it should be "run", otherwise there's no point in adding the feature; if it is not enabled by default, it is very likely that no one would use it.
Quoted 5 lines
A new KVM exit reason
KVM_EXIT_NOTIFYis defined for notify VM exit. If it happens withVM_INVALID_CONTEXT, hypervisor exits to user space to inform the fatal case. Then user space can inject a SHUTDOWN event to the target vcpu. This is implemented by injecting a sythesized triple fault event.
I don't think a triple fault is a good match for an event that "should not happen" and is the fault of the processor rather than the guest. This should be a KVM internal error. The workaround is to disable the notify vmexit.
Review
Quoted 4 lines
(quoted diff) +4
-0+ warn_report_once("KVM: encounter a notify exit with %svalid context in" + " guest. It means there can be possible misbehaves in" + " guest, please have a look.", + ctx_invalid ? "in" : "");
The warning should be unconditional if the context is invalid.
Quoted 1 line
+ object_class_property_add(oc,
X86_MACHINE_NOTIFY_WINDOW, "uint32_t",
uint32 (not uint32_t)
Review
Quoted 4 lines
(quoted diff) +4
-0+ x86_machine_get_notify_window, + x86_machine_set_notify_window, NULL, NULL); + object_class_property_set_description(oc, X86_MACHINE_NOTIFY_WINDOW, + "Set the notify window required by notify VM exit");
"Clock cycles without an event window after which a notification VM exit occurs"
Thanks,
Paolo
From a5cb704991cfcda19a33c622833b69a8f6928530 Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <[email protected]>
Date: Tue, 27 Sep 2022 15:20:16 +0200
Subject: [PATCH] kvm: allow target-specific accelerator properties
Several hypervisor capabilities in KVM are target-specific. When exposed to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm; for now no such property is defined.
accel/kvm/kvm-all.c +2 -0
@@ -3737,6 +3737,8 @@ static void kvm_accel_class_init(ObjectClass *oc, void *data) NULL, NULL);object_class_property_set_description (oc,"dirty-ring-size" ,"Size of KVM dirty page ring buffer (default: 0, i.e. use bitmap)" ); + +kvm_arch_accel_class_init (oc); }static const TypeInfo kvm_accel_type = {
include/sysemu/kvm.h +2 -0
@@ -353,6 +353,8 @@ bool kvm_device_supported(int vmfd, uint64_t type);extern const KVMCapabilityInfo kvm_arch_required_capabilities[]; +void kvm_arch_accel_class_init (ObjectClass *oc); +void kvm_arch_pre_run (CPUState *cpu,struct kvm_run *run);MemTxAttrs kvm_arch_post_run (CPUState *cpu,struct kvm_run *run);
target/arm/kvm.c +4 -0
@@ -1056,3 +1056,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
target/i386/kvm/kvm.c +4 -0
@@ -5472,3 +5472,7 @@ void kvm_request_xsave_components(X86CPU *cpu, uint64_t mask) mask &= ~BIT_ULL (bit); } } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
target/mips/kvm.c +4 -0
@@ -1294,3 +1294,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
target/ppc/kvm.c +4 -0
@@ -2966,3 +2966,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
target/riscv/kvm.c +4 -0
@@ -532,3 +532,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
target/s390x/kvm/kvm.c +4 -0
@@ -2574,3 +2574,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
Re: [PATCH v7 2/2] i386: Add notify VM exit support
Quoted 9 lines · Paolo Bonzini
Quoted 7 lines · Chenyi Qiang
Because there are some concerns, e.g. a notify VM exit may happen with
VM_CONTEXT_INVALIDset in exit qualification (no cases are anticipated that would set this bit), which means VM context is corrupted. To avoid the false positive and a well-behaved guest gets killed, make this feature disabled by default. Users can enable the feature by a new machine property:
qemu -machine notify_vmexit=on,notify_window=0 ...
Quoted 8 lines
Some comments on the interface:
- the argument should be one of "run" (i.e. do nothing and continue, the default), "internal-error" (i.e. raise a KVM internal error), "disable" (i.e. do not enable the capability). You can add the enum to
qapi/runstate.jsonand useobject_class_property_add_enumto define the QOM property.
So, IIUC, the three options of notify-vmexit would be:
1. run (enable the capability but do nothing if the vmexit happens)
2. internal-error (enable the capability and raise a KVM internal error if it happens)
3. disable (do not enable the capability)
For the invalid context case, exit and raise a KVM internal error unconditionally.
Quoted 11 lines
- properties should have a dash ("-") in the name, not an underscore
- the property should be added to "-accel kvm,..." (on x86 only). See after my signature for a preparatory patch that adds a new
kvm_arch_accel_class_inithook.The default would be either "run" or "disable". Honestly I think it should be "run", otherwise there's no point in adding the feature; if it is not enabled by default, it is very likely that no one would use it.
Yeah, personally speaking, I also prefer to enable it by default. In previous KVM patch discussion, we were worried about the buggy silicon to cause the invalid context case, which will kill the benign VM. But since there is little possibility and we can't tell if it is a false positive when it happens. I think default to "run" is acceptable.
Quoted 11 lines
Quoted 5 lines
A new KVM exit reason
KVM_EXIT_NOTIFYis defined for notify VM exit. If it happens withVM_INVALID_CONTEXT, hypervisor exits to user space to inform the fatal case. Then user space can inject a SHUTDOWN event to the target vcpu. This is implemented by injecting a sythesized triple fault event.I don't think a triple fault is a good match for an event that "should not happen" and is the fault of the processor rather than the guest. This should be a KVM internal error. The workaround is to disable the notify vmexit.
Quoted 9 lines
Quoted 6 lines
+ warn_report_once("KVM: encounter a notify exit with %svalid context in"
+ " guest. It means there can be possible misbehaves in"
+ " guest, please have a look.", +ctx_invalid? "in" : "");The warning should be unconditional if the context is invalid.
In valid context case, the warning can also notify the admin that the guest misbehaves. Is it necessary to remove it?
Quoted 4 lines
Quoted 1 line
+ object_class_property_add(oc,
X86_MACHINE_NOTIFY_WINDOW, "uint32_t",uint32 (not
uint32_t)
...
Quoted 8 lines
Quoted 5 lines
+
x86_machine_get_notify_window, +x86_machine_set_notify_window, NULL, NULL);
+ object_class_property_set_description(oc,X86_MACHINE_NOTIFY_WINDOW, + "Set the notify window required by notify VM exit");"Clock cycles without an event window after which a notification VM exit occurs"
Will Fix it. Thanks a lot!
Quoted 120 lines
Thanks,
Paolo
From
a5cb704991cfcda19a33c622833b69a8f6928530Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <[email protected]>
Date: Tue, 27 Sep 2022 15:20:16 +0200
Subject: [PATCH] kvm: allow target-specific accelerator propertiesSeveral hypervisor capabilities in KVM are target-specific. When exposed to QEMU users as accelerator properties (i.e. -accel kvm,prop=value), they should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm; for now no such property is defined.
Signed-off-by Paolo Bonzini <[email protected]>accel/kvm/kvm-all.c +2
-0@@ -3737,6 +3737,8 @@ static void kvm_accel_class_init(ObjectClass *oc, void *data) NULL, NULL); object_class_property_set_description(oc, "dirty-ring-size", "Size of KVM dirty page ring buffer (default: 0, i.e. use bitmap)"); + + kvm_arch_accel_class_init(oc); }static const TypeInfo
kvm_accel_type= {include/sysemu/kvm.h +2
-0@@ -353,6 +353,8 @@ bool kvm_device_supported(int vmfd, uint64_t type); extern const KVMCapabilityInfo kvm_arch_required_capabilities[]; +void kvm_arch_accel_class_init (ObjectClass *oc); + void kvm_arch_pre_run(CPUState *cpu, struct kvm_run *run); MemTxAttrs kvm_arch_post_run(CPUState *cpu, struct kvm_run *run);target/arm/kvm.c +4
-0@@ -1056,3 +1056,7 @@ bool kvm_arch_cpu_check_are_resettable(void) { return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/i386/kvm/kvm.c +4
-0@@ -5472,3 +5472,7 @@ void kvm_request_xsave_components(X86CPU *cpu, uint64_t mask) mask &= ~BIT_ULL(bit); } } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/mips/kvm.c +4
-0@@ -1294,3 +1294,7 @@ bool kvm_arch_cpu_check_are_resettable(void) { return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/ppc/kvm.c +4
-0@@ -2966,3 +2966,7 @@ bool kvm_arch_cpu_check_are_resettable(void) { return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/riscv/kvm.c +4
-0@@ -532,3 +532,7 @@ bool kvm_arch_cpu_check_are_resettable(void) { return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/s390x/kvm/kvm.c +4
-0@@ -2574,3 +2574,7 @@ bool kvm_arch_cpu_check_are_resettable(void) { return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}
Paolo Bonzini
maintainerRe: [PATCH v7 2/2] i386: Add notify VM exit support
Il mer 28 set 2022, 04:21 Chenyi Qiang <[email protected]> ha scritto:
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
+ warn_report_once("KVM: encounter a notify exit with %svalid
context in"
+ " guest. It means there can be possible
misbehaves in"(quoted diff) +2
-0+ " guest, please have a look.", + ctx_invalid ? "in" : "");
Quoted 6 lines
Quoted 2 lines
The warning should be unconditional if the context is invalid.
In valid context case, the warning can also notify the admin that the guest misbehaves. Is it necessary to remove it?
You can keep it, but it should be separated so that that invalid context case uses warn_report instead of warn_report_once.
Paolo
Quoted 144 lines
Quoted 1 line
Quoted 1 line
+ object_class_property_add(oc,
X86_MACHINE_NOTIFY_WINDOW,"
uint32_t",Quoted 3 lines
uint32 (not
uint32_t)...
Quoted 4 lines
Quoted 4 lines
(quoted diff) +2
-0+ x86_machine_get_notify_window, + x86_machine_set_notify_window, NULL,NULL);
+ object_class_property_set_description(oc,
X86_MACHINE_NOTIFY_WINDOW,Quoted 5 lines
Quoted 1 line
+ "Set the notify window required by notify VM exit");
"Clock cycles without an event window after which a notification VM exit occurs"
Will Fix it. Thanks a lot!
Quoted 11 lines
Thanks,
Paolo
From
a5cb704991cfcda19a33c622833b69a8f6928530Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <[email protected]>
Date: Tue, 27 Sep 2022 15:20:16 +0200
Subject: [PATCH] kvm: allow target-specific accelerator propertiesSeveral hypervisor capabilities in KVM are target-specific. When exposed to QEMU users as accelerator properties (i.e. -accel kvm,prop=value),
they
Quoted 109 lines
should not be available for all targets.
Add a hook for targets to add their own properties to -accel kvm; for now no such property is defined.
Signed-off-by Paolo Bonzini <[email protected]>accel/kvm/kvm-all.c +2
-0@@ -3737,6 +3737,8 @@ static void kvm_accel_class_init(ObjectClass *oc, void *data) NULL, NULL);object_class_property_set_description (oc,"dirty-ring-size" , "Size of KVM dirty page ring buffer (default: 0, i.e. use bitmap)"); + + kvm_arch_accel_class_init(oc); }static const TypeInfo kvm_accel_type = {include/sysemu/kvm.h +2
-0@@ -353,6 +353,8 @@ bool kvm_device_supported(int vmfd, uint64_t type);extern const KVMCapabilityInfo kvm_arch_required_capabilities[]; +void kvm_arch_accel_class_init (ObjectClass *oc); +void kvm_arch_pre_run (CPUState *cpu,struct kvm_run *run);MemTxAttrs kvm_arch_post_run (CPUState *cpu,struct kvm_run *run);target/arm/kvm.c +4
-0@@ -1056,3 +1056,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/i386/kvm/kvm.c +4
-0@@ -5472,3 +5472,7 @@ void kvm_request_xsave_components(X86CPU *cpu, uint64_t mask) mask &= ~BIT_ULL(bit); } } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/mips/kvm.c +4
-0@@ -1294,3 +1294,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/ppc/kvm.c +4
-0@@ -2966,3 +2966,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/riscv/kvm.c +4
-0@@ -532,3 +532,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}target/s390x/kvm/kvm.c +4
-0@@ -2574,3 +2574,7 @@ bool kvm_arch_cpu_check_are_resettable(void) {return true; } + +void kvm_arch_accel_class_init (ObjectClass *oc) +{ +}