dt-bindings: watchdog: Convert Xilinx watchdog bindings to json-schema
Subsystems (4)
PATCH v2 1/1 dt-bindings: watchdog: Convert Xilinx watchdog bindings to json-schema
Convert Xilinx watchdog bindings to DT schema format using json-schema
Signed-off-by Shubhrajyoti Datta <[email protected]>
Signed-off-by Radhey Shyam Pandey <[email protected]>
Signed-off-by Srinivas Neeli <[email protected]>
---
Changes in V2:
- Updated file name with compatible.
- Added subsystem name in subject prefix.
- Address minior comments.
--- .../bindings/watchdog/of-xilinx-wdt.txt | 26 ------- .../watchdog/xlnx,xps-timebase-wdt.yaml | 68 +++++++++++++++++++ 2 files changed, 68 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt create mode 100644 Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt deleted +0 -26
@@ -1,26 +0,0 @@ -Xilinx AXI/PLB soft-core watchdog Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,xps-timebase-wdt-1.00.a" or - "xlnx,xps-timebase-wdt-1.01.a". -- reg : Physical base address and size - -Optional properties: -- clocks : Input clock specifier. Refer to common clock - bindings. -- clock-frequency : Frequency of clock in Hz -- xlnx,wdt-enable-once : 0 - Watchdog can be restarted - 1 - Watchdog can be enabled just once -- xlnx,wdt-interval : Watchdog timeout interval in 2^<val> clock cycles, - <val> is integer from 8 to 31. - -Example: -axi-timebase-wdt@40100000 { - clock-frequency = <50000000>; - compatible = "xlnx,xps-timebase-wdt-1.00.a"; - clocks = <&clkc 15>; - reg = <0x40100000 0x10000>; - xlnx,wdt-enable-once = <0x0>; - xlnx,wdt-interval = <0x1b>; -} ;
Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml new file +68 -0
68 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 5 lines · Srinivas Neeli
Convert Xilinx watchdog bindings to DT schema format using json-schema
Signed-off-by Shubhrajyoti Datta <[email protected]>Signed-off-by Radhey Shyam Pandey <[email protected]>Signed-off-by Srinivas Neeli <[email protected]>
Reviewed-by Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Quoted 6 lines · Srinivas Neeli
Convert Xilinx watchdog bindings to DT schema format using json-schema
Signed-off-by Shubhrajyoti Datta <[email protected]>Signed-off-by Radhey Shyam Pandey <[email protected]>Signed-off-by Srinivas Neeli <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>
Reviewed-by Guenter Roeck <[email protected]>
Quoted 118 lines
---
Changes in V2:
- Updated file name with compatible.
- Added subsystem name in subject prefix.
- Address minior comments.--- .../bindings/watchdog/of-xilinx-wdt.txt | 26 ------- .../watchdog/xlnx,xps-timebase-wdt.yaml | 68 +++++++++++++++++++ 2 files changed, 68 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt create mode 100644 Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yamlDocumentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt deleted +0
-26@@ -1,26 +0,0 @@ -Xilinx AXI/PLB soft-core watchdog Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,xps-timebase-wdt-1.00.a" or - "xlnx,xps-timebase-wdt-1.01.a". -- reg : Physical base address and size - -Optional properties: -- clocks : Input clock specifier. Refer to common clock - bindings. -- clock-frequency : Frequency of clock in Hz -- xlnx,wdt-enable-once : 0 - Watchdog can be restarted - 1 - Watchdog can be enabled just once -- xlnx,wdt-interval : Watchdog timeout interval in 2^<val> clock cycles, - <val> is integer from 8 to 31. - -Example: -axi-timebase-wdt@40100000 { - clock-frequency = <50000000>; - compatible = "xlnx,xps-timebase-wdt-1.00.a"; - clocks = <&clkc 15>; - reg = <0x40100000 0x10000>; - xlnx,wdt-enable-once = <0x0>; - xlnx,wdt-interval = <0x1b>; -} ;Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml new file +68
-0@@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx AXI/PLB softcore and window Watchdog Timer + +maintainers: + - Shubhrajyoti Datta <[email protected]> + - Srinivas Neeli <[email protected]> + +description: + The Timebase watchdog timer(WDT) is a free-running 32 bit counter. + WDT uses a dual-expiration architecture. After one expiration of + the timeout interval, an interrupt is generated and the WDT state + bit is set to one in the status register. If the state bit is not + cleared (by writing a one to the state bit) before the next + expiration of the timeout interval, a WDT reset is generated. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - xlnx,xps-timebase-wdt-1.01.a + - xlnx,xps-timebase-wdt-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + description: Frequency of clock in Hz + + xlnx,wdt-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Watchdog timeout interval + minimum: 8 + maximum: 32 + + xlnx,wdt-enable-once: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: If watchdog is configured as enable once, + then the watchdog cannot be disabled after + it has been enabled. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@40100000 { + compatible = "xlnx,xps-timebase-wdt-1.00.a"; + reg = <0x40100000 0x1000>; + clock-frequency = <50000000>; + clocks = <&clkc 15>; + xlnx,wdt-enable-once = <0x0>; + xlnx,wdt-interval = <0x1b>; + }; +...