Add support for T-HEAD C9xx PMU extensions
v4 cover Add support for T-HEAD C9xx PMU extensions
The T-HEAD C9XX cores implement functionality very similar to SSCOFPMF. Instead of implementing a separate interface into SBI as done in v1, we can add the C9XX tidbits with quite minimal overhead and leaverage the existing SBI pmu interface including giving access to the firmware counters.
The current only hickup is the detection override in sbi_hart, where I still need to find out why the MHPMCOUNTERs are not writeable at _that_ point of the boot, but with this series on top of openSBI 1.1 and the matching kernel perf patch I get reasonable results for example for:
perf stat -e cycles -e instructions -e L1-icache-load-misses -e L1-icache-loads ls
Performance counter stats for 'ls':
17119496 cycles
2867765 instructions # 0.17 insn per cycle
55929 L1-icache-load-misses # 1.61% of all L1-icache accesses
3467346 L1-icache-loads 0.030156216 seconds time elapsed
0.000000000 seconds user
0.023496000 seconds syschanges in v4:
- use the new sbi_pmu_device structure for holding the overrides and extend it where needed
changes in v3:
- follow Atish's advice and implement an abstraction to not pollute the core pmu with cpu-specific variants
changes in v2:
- don't implement a separate interface but instead modify the sbi-pmu to allow the c9xx to use standard pmu interface
Heiko Stuebner (5):
lib: sbi: do platform-specific extension population earlier
lib: sbi_pmu: move pmu irq information into pmu itself
lib: sbi_pmu: add override for counter data
platform: generic: add extensions_init handler and platform-override
platform: generic: allwinner: add support for c9xx pmu
include/sbi/sbi_pmu.h | 16 +++ lib/sbi/sbi_hart.c | 21 ++- lib/sbi/sbi_pmu.c | 19 +++ platform/generic/allwinner/sun20i-d1.c | 72 +++++++++++ platform/generic/include/platform_override.h | 1 + platform/generic/include/thead_c9xx.h | 127 +++++++++++++++++++ platform/generic/platform.c | 9 ++ 7 files changed, 258 insertions(+), 7 deletions(-) create mode 100644 platform/generic/include/thead_c9xx.h
Signature · 1 line
2.35.1
PATCH v4 1/5 lib: sbi: do platform-specific extension population earlier
Some of the more specific detections in hart_detect_features() might need to check platform-specific extensions so might need the platform-extensions being populated earlier.
So move the call to sbi_platform_extensions_init() to an earlier place.
--- lib/sbi/sbi_hart.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
lib/sbi/sbi_hart.c +5 -5
@@ -553,6 +553,11 @@ static int hart_detect_features(struct sbi_scratch *scratch) hfeatures->pmp_count =0 ; hfeatures->mhpm_count =0 ; +/* Let platform populate extensions */ + rc =sbi_platform_extensions_init (sbi_platform_thishart_ptr ()); +if (rc) +return rc; +#define __check_csr (__csr, __rdonly, __wrval, __field, __skip) \ oldval = csr_read_allowed(__csr, (ulong)&trap); \ if (!trap.cause) { \
@@ -681,11 +686,6 @@ __mhpm_skip: SBI_HART_EXT_SMSTATEEN, true); } -/* Let platform populate extensions */ - rc =sbi_platform_extensions_init (sbi_platform_thishart_ptr ()); -if (rc) -return rc; -/* Mark hart feature detection done */ hfeatures->detected = true;
Signature · 1 line
2.35.1
PATCH v4 1/5 lib: sbi: do platform-specific extension population earlier
Quoted 44 lines · Heiko Stuebner
Some of the more specific detections in
hart_detect_features()might need to check platform-specific extensions so might need the platform-extensions being populated earlier.So move the call to
sbi_platform_extensions_init()to an earlier place.Signed-off-by Heiko Stuebner <[email protected]>--- lib/sbi/sbi_hart.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)lib/sbi/sbi_hart.c +5
-6@@ -553,6 +553,11 @@ static int hart_detect_features(struct sbi_scratch *scratch) hfeatures->pmp_count =0 ; hfeatures->mhpm_count =0 ; +/* Let platform populate extensions */ + rc =sbi_platform_extensions_init (sbi_platform_thishart_ptr ()); +if (rc) +return rc; +#define __check_csr (__csr, __rdonly, __wrval, __field, __skip) \ oldval = csr_read_allowed(__csr, (ulong)&trap); \ if (!trap.cause) { \@@ -681,11 +686,6 @@ __mhpm_skip: SBI_HART_EXT_SMSTATEEN, true); } -/* Let platform populate extensions */ - rc =sbi_platform_extensions_init (sbi_platform_thishart_ptr ()); -if (rc) -return rc; -/* Mark hart feature detection done */ hfeatures->detected = true; --2.35.1
Signature · 2 lines
Best Regards Guo Ren
PATCH v4 2/5 lib: sbi_pmu: move pmu irq information into pmu itself
In reply to Heiko StuebnerDon't spread checking for pmu extensions through the code but instead introduce a sbi-pmu function that other code can call to get the correct information about the existence of the pmu interrupt.
Add a sbi_pmu_device override function to allow overridung this bit as well if needed.
--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 4 ++-- lib/sbi/sbi_pmu.c | 12 ++++++++++++ 3 files changed, 22 insertions(+), 2 deletions(-)
include/sbi/sbi_pmu.h +8 -0
@@ -73,6 +73,11 @@ struct sbi_pmu_device {* Note: 0 <= counter_index < SBI_PMU_HW_CTR_MAX */ void (*hw_counter_disable_irq)(uint32_t counter_index); + +/** +* Custom function returning the machine-specific irq-bit. +*/ +int (*hw_counter_irq_bit)(void ); };/** Get the PMU platform device */
@@ -87,6 +92,9 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot);/** Reset PMU during hart exit */ void sbi_pmu_exit (struct sbi_scratch *scratch); +/** Return the pmu irq bit depending on extension existence */ +int sbi_pmu_irq_bit (void ); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table.
lib/sbi/sbi_hart.c +2 -2
@@ -19,6 +19,7 @@#include <sbi/sbi_hart.h> #include <sbi/sbi_math.h> #include <sbi/sbi_platform.h> +#include <sbi/sbi_pmu.h> #include <sbi/sbi_string.h> #include <sbi/sbi_trap.h>
@@ -208,8 +209,7 @@ static int delegate_traps(struct sbi_scratch *scratch)/* Send M-mode interrupts and most exceptions to S-mode */ interrupts =MIP_SSIP |MIP_STIP |MIP_SEIP ; -if (sbi_hart_has_extension (scratch,SBI_HART_EXT_SSCOFPMF )) - interrupts |=MIP_LCOFIP ; + interrupts |=sbi_pmu_irq_bit (); exceptions = (1U <<CAUSE_MISALIGNED_FETCH ) | (1U <<CAUSE_BREAKPOINT ) | (1U <<CAUSE_USER_ECALL );
lib/sbi/sbi_pmu.c +12 -0
@@ -344,6 +344,18 @@ skip_inhibit_update:return 0 ; } +int sbi_pmu_irq_bit (void ) +{ +struct sbi_scratch *scratch =sbi_scratch_thishart_ptr (); + +if (sbi_hart_has_extension (scratch,SBI_HART_EXT_SSCOFPMF )) +return MIP_LCOFIP ; +if (pmu_dev && pmu_dev->hw_counter_irq_bit) +return pmu_dev->hw_counter_irq_bit (); + +return 0 ; +} +static int pmu_ctr_start_fw (uint32_t cidx,uint32_t event_code,uint64_t ival,bool ival_update) {
Signature · 1 line
2.35.1
PATCH v4 2/5 lib: sbi_pmu: move pmu irq information into pmu itself
Quoted 90 lines · Heiko Stuebner
Don't spread checking for pmu extensions through the code but instead introduce a sbi-pmu function that other code can call to get the correct information about the existence of the pmu interrupt.
Add a
sbi_pmu_deviceoverride function to allow overridung this bit as well if needed.Signed-off-by Heiko Stuebner <[email protected]>--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 4 ++-- lib/sbi/sbi_pmu.c | 12 ++++++++++++ 3 files changed, 22 insertions(+), 2 deletions(-)include/sbi/sbi_pmu.h +8
-0@@ -73,6 +73,11 @@ struct sbi_pmu_device {* Note: 0 <= counter_index < SBI_PMU_HW_CTR_MAX */ void (*hw_counter_disable_irq)(uint32_t counter_index); + +/** +* Custom function returning the machine-specific irq-bit. +*/ +int (*hw_counter_irq_bit)(void ); };/** Get the PMU platform device */ @@ -87,6 +92,9 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot);/** Reset PMU during hart exit */ void sbi_pmu_exit (struct sbi_scratch *scratch); +/** Return the pmu irq bit depending on extension existence */ +int sbi_pmu_irq_bit (void ); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table. lib/sbi/sbi_hart.c +2
-2@@ -19,6 +19,7 @@#include <sbi/sbi_hart.h> #include <sbi/sbi_math.h> #include <sbi/sbi_platform.h> +#include <sbi/sbi_pmu.h> #include <sbi/sbi_string.h> #include <sbi/sbi_trap.h> @@ -208,8 +209,7 @@ static int delegate_traps(struct sbi_scratch *scratch)/* Send M-mode interrupts and most exceptions to S-mode */ interrupts =MIP_SSIP |MIP_STIP |MIP_SEIP ; -if (sbi_hart_has_extension (scratch,SBI_HART_EXT_SSCOFPMF )) - interrupts |=MIP_LCOFIP ; + interrupts |=sbi_pmu_irq_bit (); exceptions = (1U <<CAUSE_MISALIGNED_FETCH ) | (1U <<CAUSE_BREAKPOINT ) | (1U <<CAUSE_USER_ECALL );lib/sbi/sbi_pmu.c +12
-1@@ -344,6 +344,18 @@ skip_inhibit_update:return 0 ; } +int sbi_pmu_irq_bit (void ) +{ +struct sbi_scratch *scratch =sbi_scratch_thishart_ptr (); + +if (sbi_hart_has_extension (scratch,SBI_HART_EXT_SSCOFPMF )) +return MIP_LCOFIP ; +if (pmu_dev && pmu_dev->hw_counter_irq_bit) +return pmu_dev->hw_counter_irq_bit (); + +return 0 ; +} +static int pmu_ctr_start_fw (uint32_t cidx,uint32_t event_code,uint64_t ival,bool ival_update) { --2.35.1
Signature · 2 lines
Best Regards Guo Ren
PATCH v4 2/5 lib: sbi_pmu: move pmu irq information into pmu itself
In reply to Heiko StuebnerQuoted 91 lines · Heiko Stuebner
Don't spread checking for pmu extensions through the code but instead introduce a sbi-pmu function that other code can call to get the correct information about the existence of the pmu interrupt.
Add a
sbi_pmu_deviceoverride function to allow overridung this bit as well if needed.Signed-off-by Heiko Stuebner <[email protected]>--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 4 ++-- lib/sbi/sbi_pmu.c | 12 ++++++++++++ 3 files changed, 22 insertions(+), 2 deletions(-)include/sbi/sbi_pmu.h +8
-0@@ -73,6 +73,11 @@ struct sbi_pmu_device {* Note: 0 <= counter_index < SBI_PMU_HW_CTR_MAX */ void (*hw_counter_disable_irq)(uint32_t counter_index); + +/** +* Custom function returning the machine-specific irq-bit. +*/ +int (*hw_counter_irq_bit)(void ); };/** Get the PMU platform device */ @@ -87,6 +92,9 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot);/** Reset PMU during hart exit */ void sbi_pmu_exit (struct sbi_scratch *scratch); +/** Return the pmu irq bit depending on extension existence */ +int sbi_pmu_irq_bit (void ); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table. lib/sbi/sbi_hart.c +2
-2@@ -19,6 +19,7 @@#include <sbi/sbi_hart.h> #include <sbi/sbi_math.h> #include <sbi/sbi_platform.h> +#include <sbi/sbi_pmu.h> #include <sbi/sbi_string.h> #include <sbi/sbi_trap.h> @@ -208,8 +209,7 @@ static int delegate_traps(struct sbi_scratch *scratch)/* Send M-mode interrupts and most exceptions to S-mode */ interrupts =MIP_SSIP |MIP_STIP |MIP_SEIP ; -if (sbi_hart_has_extension (scratch,SBI_HART_EXT_SSCOFPMF )) - interrupts |=MIP_LCOFIP ; + interrupts |=sbi_pmu_irq_bit (); exceptions = (1U <<CAUSE_MISALIGNED_FETCH ) | (1U <<CAUSE_BREAKPOINT ) | (1U <<CAUSE_USER_ECALL );lib/sbi/sbi_pmu.c +12
-1@@ -344,6 +344,18 @@ skip_inhibit_update:return 0 ; } +int sbi_pmu_irq_bit (void ) +{ +struct sbi_scratch *scratch =sbi_scratch_thishart_ptr (); + +if (sbi_hart_has_extension (scratch,SBI_HART_EXT_SSCOFPMF )) +return MIP_LCOFIP ; +if (pmu_dev && pmu_dev->hw_counter_irq_bit) +return pmu_dev->hw_counter_irq_bit (); + +return 0 ; +} +static int pmu_ctr_start_fw (uint32_t cidx,uint32_t event_code,uint64_t ival,bool ival_update) { --2.35.1
Quoted 4 lines
--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi
Signature · 2 lines
Regards, Atish
PATCH v4 3/5 lib: sbi_pmu: add override for counter data
In reply to Heiko StuebnerIn general counter-data is auto-detected but some platforms may implement counters in a way that breaks this detection.
Implement an abstraction that those platforms can hook into and override the counter-data.
--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 7 +++++++ lib/sbi/sbi_pmu.c | 7 +++++++ 3 files changed, 22 insertions(+)
include/sbi/sbi_pmu.h +8 -0
@@ -78,6 +78,11 @@ struct sbi_pmu_device {* Custom function returning the machine-specific irq-bit. */ int (*hw_counter_irq_bit)(void ); + +/** +* Override autodetected counter data. +*/ +void (*hw_counter_data)(unsigned int *count,unsigned int *bits); };/** Get the PMU platform device */
@@ -95,6 +100,9 @@ void sbi_pmu_exit(struct sbi_scratch *scratch);/** Return the pmu irq bit depending on extension existence */ int sbi_pmu_irq_bit (void ); +/** Allow non-standard platforms to override probed counter information */ +void sbi_pmu_override_counter_data (unsigned int *count,unsigned int *bits); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table.
lib/sbi/sbi_hart.c +7 -0
@@ -632,6 +632,13 @@ __mhpm_skip:#undef __check_csr_2#undef __check_csr +/** +* Allow non-standard implementations to override the detected +* values for number of counters and bits. +*/ +sbi_pmu_override_counter_data (&hfeatures->mhpm_count, + &hfeatures->mhpm_bits); +/* Detect if hart supports Priv v1.10 */ val =csr_read_allowed (CSR_MCOUNTEREN , (unsigned long )&trap);if (!trap.cause)
lib/sbi/sbi_pmu.c +7 -0
@@ -852,3 +852,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)return 0 ; } + +void sbi_pmu_override_counter_data (unsigned int *count, +unsigned int *bits) +{ +if (pmu_dev && pmu_dev->hw_counter_data) + pmu_dev->hw_counter_data (count, bits); +}
Signature · 1 line
2.35.1
PATCH v4 3/5 lib: sbi_pmu: add override for counter data
Quoted 76 lines · Heiko Stuebner
In general counter-data is auto-detected but some platforms may implement counters in a way that breaks this detection.
Implement an abstraction that those platforms can hook into and override the counter-data.
Signed-off-by Heiko Stuebner <[email protected]>--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 7 +++++++ lib/sbi/sbi_pmu.c | 7 +++++++ 3 files changed, 22 insertions(+)include/sbi/sbi_pmu.h +8
-0@@ -78,6 +78,11 @@ struct sbi_pmu_device {* Custom function returning the machine-specific irq-bit. */ int (*hw_counter_irq_bit)(void ); + +/** +* Override autodetected counter data. +*/ +void (*hw_counter_data)(unsigned int *count,unsigned int *bits); };/** Get the PMU platform device */ @@ -95,6 +100,9 @@ void sbi_pmu_exit(struct sbi_scratch *scratch);/** Return the pmu irq bit depending on extension existence */ int sbi_pmu_irq_bit (void ); +/** Allow non-standard platforms to override probed counter information */ +void sbi_pmu_override_counter_data (unsigned int *count,unsigned int *bits); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table. lib/sbi/sbi_hart.c +7
-0@@ -632,6 +632,13 @@ __mhpm_skip:#undef __check_csr_2#undef __check_csr +/** +* Allow non-standard implementations to override the detected +* values for number of counters and bits. +*/ +sbi_pmu_override_counter_data (&hfeatures->mhpm_count, + &hfeatures->mhpm_bits); +/* Detect if hart supports Priv v1.10 */ val =csr_read_allowed (CSR_MCOUNTEREN , (unsigned long )&trap);if (!trap.cause)lib/sbi/sbi_pmu.c +7
-1@@ -852,3 +852,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)return 0 ; } + +void sbi_pmu_override_counter_data (unsigned int *count, +unsigned int *bits) +{ +if (pmu_dev && pmu_dev->hw_counter_data) + pmu_dev->hw_counter_data (count, bits); +} --2.35.1
Signature · 2 lines
Best Regards Guo Ren
PATCH v4 3/5 lib: sbi_pmu: add override for counter data
In reply to Heiko StuebnerQuoted 77 lines · Heiko Stuebner
In general counter-data is auto-detected but some platforms may implement counters in a way that breaks this detection.
Implement an abstraction that those platforms can hook into and override the counter-data.
Signed-off-by Heiko Stuebner <[email protected]>--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 7 +++++++ lib/sbi/sbi_pmu.c | 7 +++++++ 3 files changed, 22 insertions(+)include/sbi/sbi_pmu.h +8
-0@@ -78,6 +78,11 @@ struct sbi_pmu_device {* Custom function returning the machine-specific irq-bit. */ int (*hw_counter_irq_bit)(void ); + +/** +* Override autodetected counter data. +*/ +void (*hw_counter_data)(unsigned int *count,unsigned int *bits); };/** Get the PMU platform device */ @@ -95,6 +100,9 @@ void sbi_pmu_exit(struct sbi_scratch *scratch);/** Return the pmu irq bit depending on extension existence */ int sbi_pmu_irq_bit (void ); +/** Allow non-standard platforms to override probed counter information */ +void sbi_pmu_override_counter_data (unsigned int *count,unsigned int *bits); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table. lib/sbi/sbi_hart.c +7
-0@@ -632,6 +632,13 @@ __mhpm_skip:#undef __check_csr_2#undef __check_csr +/** +* Allow non-standard implementations to override the detected +* values for number of counters and bits. +*/ +sbi_pmu_override_counter_data (&hfeatures->mhpm_count, + &hfeatures->mhpm_bits); +/* Detect if hart supports Priv v1.10 */ val =csr_read_allowed (CSR_MCOUNTEREN , (unsigned long )&trap);if (!trap.cause)lib/sbi/sbi_pmu.c +7
-1@@ -852,3 +852,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)return 0 ; } + +void sbi_pmu_override_counter_data (unsigned int *count, +unsigned int *bits) +{ +if (pmu_dev && pmu_dev->hw_counter_data) + pmu_dev->hw_counter_data (count, bits); +} --2.35.1
Quoted 4 lines
--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi
We may need similar functionality in the future as well where the platform may override the hart feature details.
Should we pass the hfeatures in the extension_init callback so that a specific platform override can access it ?
Signature · 2 lines
Regards, Atish
PATCH v4 3/5 lib: sbi_pmu: add override for counter data
Am Donnerstag, 29. September 2022, 10:28:57 CEST schrieb Atish Patra:
Quoted 78 lines · Heiko Stuebner
Quoted 77 lines
In general counter-data is auto-detected but some platforms may implement counters in a way that breaks this detection.
Implement an abstraction that those platforms can hook into and override the counter-data.
Signed-off-by Heiko Stuebner <[email protected]>--- include/sbi/sbi_pmu.h | 8 ++++++++ lib/sbi/sbi_hart.c | 7 +++++++ lib/sbi/sbi_pmu.c | 7 +++++++ 3 files changed, 22 insertions(+)include/sbi/sbi_pmu.h +8
-0@@ -78,6 +78,11 @@ struct sbi_pmu_device {* Custom function returning the machine-specific irq-bit. */ int (*hw_counter_irq_bit)(void ); + +/** +* Override autodetected counter data. +*/ +void (*hw_counter_data)(unsigned int *count,unsigned int *bits); };/** Get the PMU platform device */ @@ -95,6 +100,9 @@ void sbi_pmu_exit(struct sbi_scratch *scratch);/** Return the pmu irq bit depending on extension existence */ int sbi_pmu_irq_bit (void ); +/** Allow non-standard platforms to override probed counter information */ +void sbi_pmu_override_counter_data (unsigned int *count,unsigned int *bits); +/** * Add the hardware event to counter mapping information. This should be called * from the platform code to update the mapping table. lib/sbi/sbi_hart.c +7
-0@@ -632,6 +632,13 @@ __mhpm_skip:#undef __check_csr_2#undef __check_csr +/** +* Allow non-standard implementations to override the detected +* values for number of counters and bits. +*/ +sbi_pmu_override_counter_data (&hfeatures->mhpm_count, + &hfeatures->mhpm_bits); +/* Detect if hart supports Priv v1.10 */ val =csr_read_allowed (CSR_MCOUNTEREN , (unsigned long )&trap);if (!trap.cause)lib/sbi/sbi_pmu.c +7
-1@@ -852,3 +852,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)return 0 ; } + +void sbi_pmu_override_counter_data (unsigned int *count, +unsigned int *bits) +{ +if (pmu_dev && pmu_dev->hw_counter_data) + pmu_dev->hw_counter_data (count, bits); +} --2.35.1
Quoted 9 lines
Quoted 4 lines
--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbiWe may need similar functionality in the future as well where the platform may override the hart feature details.
Should we pass the hfeatures in theextension_initcallback so that a specific platform override can access it ?
you tell me :-) .
I.e. I didn't want to expose the previously unexposed hfeatures struct (right now it's local to sbi_hart) but if it's ok to expose it, directly setting the hfeatures values of course makes a lot of sense also for future uses.
Heiko
PATCH v4 4/5 platform: generic: add extensions_init handler and platform-override
In reply to Heiko StuebnerInit of non-standard extensions is a platform-specific thing, so allow generic platforms to do this via a platform-override.
--- platform/generic/include/platform_override.h | 1 + platform/generic/platform.c | 9 +++++++++ 2 files changed, 10 insertions(+)
platform/generic/include/platform_override.h +1 -0
@@ -22,6 +22,7 @@ struct platform_override {void (*early_exit)(const struct fdt_match *match);void (*final_exit)(const struct fdt_match *match);int (*fdt_fixup)(void *fdt,const struct fdt_match *match); +int (*extensions_init)(const struct fdt_match *match);int (*vendor_ext_check)(long extid,const struct fdt_match *match); int (*vendor_ext_provider)(long extid, long funcid, const struct sbi_trap_regs *regs,
platform/generic/platform.c +9 -0
@@ -204,6 +204,14 @@ static void generic_final_exit(void) generic_plat->final_exit (generic_plat_match); } +static int generic_extensions_init (void ) +{ +if (generic_plat && generic_plat->extensions_init) +return generic_plat->extensions_init (generic_plat_match); + +return 0 ; +} +static int generic_domains_init (void ) {return fdt_domains_populate (fdt_get_address ());
@@ -257,6 +265,7 @@ const struct sbi_platform_operations platform_ops = { .final_init = generic_final_init, .early_exit = generic_early_exit, .final_exit = generic_final_exit, + .extensions_init = generic_extensions_init, .domains_init = generic_domains_init, .console_init = generic_console_init, .irqchip_init = fdt_irqchip_init,
Signature · 1 line
2.35.1
PATCH v4 4/5 platform: generic: add extensions_init handler and platform-override
Quoted 52 lines · Heiko Stuebner
Init of non-standard extensions is a platform-specific thing, so allow generic platforms to do this via a platform-override.
Signed-off-by Heiko Stuebner <[email protected]>--- platform/generic/include/platform_override.h | 1 + platform/generic/platform.c | 9 +++++++++ 2 files changed, 10 insertions(+)platform/generic/include/platform_override.h +1
-0@@ -22,6 +22,7 @@ struct platform_override {void (*early_exit)(const struct fdt_match *match);void (*final_exit)(const struct fdt_match *match);int (*fdt_fixup)(void *fdt,const struct fdt_match *match); +int (*extensions_init)(const struct fdt_match *match);int (*vendor_ext_check)(long extid,const struct fdt_match *match); int (*vendor_ext_provider)(long extid, long funcid, const struct sbi_trap_regs *regs,platform/generic/platform.c +9
-1@@ -204,6 +204,14 @@ static void generic_final_exit(void) generic_plat->final_exit (generic_plat_match); } +static int generic_extensions_init (void ) +{ +if (generic_plat && generic_plat->extensions_init) +return generic_plat->extensions_init (generic_plat_match); + +return 0 ; +} +static int generic_domains_init (void ) {return fdt_domains_populate (fdt_get_address ());@@ -257,6 +265,7 @@ const struct sbi_platform_operations platform_ops = { .final_init = generic_final_init, .early_exit = generic_early_exit, .final_exit = generic_final_exit, + .extensions_init = generic_extensions_init, .domains_init = generic_domains_init, .console_init = generic_console_init, .irqchip_init = fdt_irqchip_init, --2.35.1
Signature · 2 lines
Best Regards Guo Ren
PATCH v4 5/5 platform: generic: allwinner: add support for c9xx pmu
In reply to Heiko StuebnerWith the T-HEAD C9XX cores being designed before or during ratification of the SSCOFPMF extension, they implement a PMU extension that behaves very similar but not equal to it by providing overflow interrupts though in a slightly different registers format.
The sun20i-d1 is using this core. So implement the necessary overrides to allow its pmu to be used via the standard sbi-pmu extension.
For now it's also the only soc using this core, so keep the additional code in the d1-space for now.
--- platform/generic/allwinner/sun20i-d1.c | 72 ++++++++++++++ platform/generic/include/thead_c9xx.h | 127 +++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 platform/generic/include/thead_c9xx.h
platform/generic/allwinner/sun20i-d1.c +72 -0
@@ -5,11 +5,13 @@*/ #include <platform_override.h> +#include <thead_c9xx.h> #include <sbi/riscv_io.h> #include <sbi/sbi_bitops.h> #include <sbi/sbi_ecall_interface.h> #include <sbi/sbi_error.h> #include <sbi/sbi_hsm.h> +#include <sbi/sbi_pmu.h> #include <sbi_utils/fdt/fdt_helper.h> #include <sbi_utils/irqchip/fdt_irqchip_plic.h>
@@ -199,6 +201,75 @@ static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match)return 0 ; } +static void thead_c9xx_pmu_ctr_enable_irq (uint32_t ctr_idx) +{ +unsigned long val; +unsigned long mip_val; + +if (ctr_idx >=SBI_PMU_HW_CTR_MAX ) +return ; + + mip_val =csr_read (CSR_MIP ); +/** +* Clear out the OF bit so that next interrupt can be enabled. +* This should be done only when the corresponding overflow interrupt +* bit is cleared. That indicates that software has already handled the +* previous interrupts or the hardware yet to set an overflow interrupt. +* Otherwise, there will be race conditions where we may clear the bit +* the software is yet to handle the interrupt. +*/ +if (!(mip_val &THEAD_C9XX_MIP_MOIP )) { + val =csr_read (THEAD_C9XX_CSR_MCOUNTEROF ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTEROF , val); + } + +/** +* SSCOFPMF uses the OF bit for enabling/disabling the interrupt, +* while the C9XX has designated enable bits. +* So enable per-counter interrupt on C9xx here. +*/ + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val |= (1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val); +} + +static void thead_c9xx_pmu_ctr_disable_irq (uint32_t ctr_idx) +{ +unsigned long val; + + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val); +} + +static int thead_c9xx_pmu_irq_bit (void ) +{ +return THEAD_C9XX_MIP_MOIP ; +} + +static void thead_c9xx_pmu_counter_data (unsigned int *count, +unsigned int *bits) +{ +/* auto-detection doesn't work on t-head c9xx cores */ + *count =29 ; + *bits =64 ; +} + +const struct sbi_pmu_device thead_c9xx_pmu_device = { + .hw_counter_enable_irq = thead_c9xx_pmu_ctr_enable_irq, + .hw_counter_disable_irq = thead_c9xx_pmu_ctr_disable_irq, + .hw_counter_irq_bit = thead_c9xx_pmu_irq_bit, + .hw_counter_data = thead_c9xx_pmu_counter_data, +}; + +static int sun20i_d1_extensions_init (const struct fdt_match *match) +{ +sbi_pmu_set_device (&thead_c9xx_pmu_device); + +return 0 ; +} +static const struct fdt_match sun20i_d1_match[] = { { .compatible ="allwinner,sun20i-d1" }, { },
@@ -207,4 +278,5 @@ static const struct fdt_match sun20i_d1_match[] = {const struct platform_override sun20i_d1 = { .match_table = sun20i_d1_match, .final_init = sun20i_d1_final_init, + .extensions_init = sun20i_d1_extensions_init, };
platform/generic/include/thead_c9xx.h new file +127 -0
127 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH v4 5/5 platform: generic: allwinner: add support for c9xx pmu
Quoted 62 lines · Heiko Stuebner
With the T-HEAD C9XX cores being designed before or during ratification of the SSCOFPMF extension, they implement a PMU extension that behaves very similar but not equal to it by providing overflow interrupts though in a slightly different registers format.
The sun20i-d1 is using this core. So implement the necessary overrides to allow its pmu to be used via the standard sbi-pmu extension.
For now it's also the only soc using this core, so keep the additional code in the d1-space for now.
Signed-off-by Heiko Stuebner <[email protected]>--- platform/generic/allwinner/sun20i-d1.c | 72 ++++++++++++++ platform/generic/include/thead_c9xx.h | 127 +++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 platform/generic/include/thead_c9xx.hplatform/generic/allwinner/sun20i-d1.c +23
-0@@ -5,11 +5,13 @@*/ #include <platform_override.h> +#include <thead_c9xx.h> #include <sbi/riscv_io.h> #include <sbi/sbi_bitops.h> #include <sbi/sbi_ecall_interface.h> #include <sbi/sbi_error.h> #include <sbi/sbi_hsm.h> +#include <sbi/sbi_pmu.h> #include <sbi_utils/fdt/fdt_helper.h> #include <sbi_utils/irqchip/fdt_irqchip_plic.h> @@ -199,6 +201,75 @@ static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match)return 0 ; } +static void thead_c9xx_pmu_ctr_enable_irq (uint32_t ctr_idx) +{ +unsigned long val; +unsigned long mip_val; + +if (ctr_idx >=SBI_PMU_HW_CTR_MAX ) +return ; + + mip_val =csr_read (CSR_MIP ); +/** +* Clear out the OF bit so that next interrupt can be enabled. +* This should be done only when the corresponding overflow interrupt +* bit is cleared. That indicates that software has already handled the +* previous interrupts or the hardware yet to set an overflow interrupt. +* Otherwise, there will be race conditions where we may clear the bit +* the software is yet to handle the interrupt. +*/ +if (!(mip_val &THEAD_C9XX_MIP_MOIP )) { + val =csr_read (THEAD_C9XX_CSR_MCOUNTEROF ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTEROF , val);
platform/generic/allwinner/sun20i-d1.c static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match) · line 234
Quoted 10 lines
platform/generic/allwinner/sun20i-d1.c +10
-0+ } + +/** +* SSCOFPMF uses the OF bit for enabling/disabling the interrupt, +* while the C9XX has designated enable bits. +* So enable per-counter interrupt on C9xx here. +*/ + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val |= (1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val);
Use csr_set
platform/generic/allwinner/sun20i-d1.c static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match) · line 243
Quoted 9 lines
platform/generic/allwinner/sun20i-d1.c +9
-0+} + +static void thead_c9xx_pmu_ctr_disable_irq (uint32_t ctr_idx) +{ +unsigned long val; + + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val);
csr_clear
Quoted 128 lines
platform/generic/allwinner/sun20i-d1.c +30
-0+} + +static int thead_c9xx_pmu_irq_bit (void ) +{ +return THEAD_C9XX_MIP_MOIP ; +} + +static void thead_c9xx_pmu_counter_data (unsigned int *count, +unsigned int *bits) +{ +/* auto-detection doesn't work on t-head c9xx cores */ + *count =29 ; + *bits =64 ; +} + +const struct sbi_pmu_device thead_c9xx_pmu_device = { + .hw_counter_enable_irq = thead_c9xx_pmu_ctr_enable_irq, + .hw_counter_disable_irq = thead_c9xx_pmu_ctr_disable_irq, + .hw_counter_irq_bit = thead_c9xx_pmu_irq_bit, + .hw_counter_data = thead_c9xx_pmu_counter_data, +}; + +static int sun20i_d1_extensions_init (const struct fdt_match *match) +{ +sbi_pmu_set_device (&thead_c9xx_pmu_device); + +return 0 ; +} +static const struct fdt_match sun20i_d1_match[] = { { .compatible ="allwinner,sun20i-d1" }, { },@@ -207,4 +278,5 @@ static const struct fdt_match sun20i_d1_match[] = {const struct platform_override sun20i_d1 = { .match_table = sun20i_d1_match, .final_init = sun20i_d1_final_init, + .extensions_init = sun20i_d1_extensions_init, };platform/generic/include/thead_c9xx.h new file +84
-0@@ -0,0 +1,127 @@ +#ifndef __RISCV_THEAD_C9XX_H____ +#define __RISCV_THEAD_C9XX_H____ + +/* T-HEAD C9xx M mode CSR. */ +#define THEAD_C9XX_CSR_MXSTATUS 0x7c0 +#define THEAD_C9XX_CSR_MHCR 0x7c1 +#define THEAD_C9XX_CSR_MCOR 0x7c2 +#define THEAD_C9XX_CSR_MCCR2 0x7c3 +#define THEAD_C9XX_CSR_MCER2 0x7c4 +#define THEAD_C9XX_CSR_MHINT 0x7c5 +#define THEAD_C9XX_CSR_MRMR 0x7c6 +#define THEAD_C9XX_CSR_MRVBR 0x7c7 +#define THEAD_C9XX_CSR_MCER 0x7c8 +#define THEAD_C9XX_CSR_MCOUNTERWEN 0x7c9 +#define THEAD_C9XX_CSR_MCOUNTERINTEN 0x7ca +#define THEAD_C9XX_CSR_MCOUNTEROF 0x7cb +#define THEAD_C9XX_CSR_MHINT2 0x7cc +#define THEAD_C9XX_CSR_MHINT3 0x7cd +#define THEAD_C9XX_CSR_MRADDR 0x7e0 +#define THEAD_C9XX_CSR_MEXSTATUS 0x7e1 +#define THEAD_C9XX_CSR_MNMICAUSE 0x7e2 +#define THEAD_C9XX_CSR_MNMIPC 0x7e3 +#define THEAD_C9XX_CSR_MHPMCR 0x7f0 +#define THEAD_C9XX_CSR_MHPMSR 0x7f1 +#define THEAD_C9XX_CSR_MHPMER 0x7f2 +#define THEAD_C9XX_CSR_MSMPR 0x7f3 +#define THEAD_C9XX_CSR_MTEECFG 0x7f4 +#define THEAD_C9XX_CSR_MZONEID 0x7f5 +#define THEAD_C9XX_CSR_ML2CPID 0x7f6 +#define THEAD_C9XX_CSR_ML2WP 0x7f7 +#define THEAD_C9XX_CSR_MDTCMCR 0x7f8 +#define THEAD_C9XX_CSR_USP 0x7d1 +#define THEAD_C9XX_CSR_MCINS 0x7d2 +#define THEAD_C9XX_CSR_MCINDEX 0x7d3 +#define THEAD_C9XX_CSR_MCDATA0 0x7d4 +#define THEAD_C9XX_CSR_MCDATA1 0x7d5 +#define THEAD_C9XX_CSR_MEICR 0x7d6 +#define THEAD_C9XX_CSR_MEICR2 0x7d7 +#define THEAD_C9XX_CSR_MBEADDR 0x7d8 +#define THEAD_C9XX_CSR_MCPUID 0xfc0 +#define THEAD_C9XX_CSR_MAPBADDR 0xfc1 +#define THEAD_C9XX_CSR_MWMSR 0xfc2 +#define THEAD_C9XX_CSR_MHALTCAUSE 0xfe0 +#define THEAD_C9XX_CSR_MDBGINFO 0xfe1 +#define THEAD_C9XX_CSR_MPCFIFO 0xfe2 + +/* T-HEAD C9xx S mode CSR. */ +#define THEAD_C9XX_CSR_SXSTATUS 0x5c0 +#define THEAD_C9XX_CSR_SHCR 0x5c1 +#define THEAD_C9XX_CSR_SCER2 0x5c2 +#define THEAD_C9XX_CSR_SCER 0x5c3 +#define THEAD_C9XX_CSR_SCOUNTERINTEN 0x5c4 +#define THEAD_C9XX_CSR_SCOUNTEROF 0x5c5 +#define THEAD_C9XX_CSR_SHINT 0x5c6 +#define THEAD_C9XX_CSR_SHINT2 0x5c7 +#define THEAD_C9XX_CSR_SHPMINHIBIT 0x5c8 +#define THEAD_C9XX_CSR_SHPMCR 0x5c9 +#define THEAD_C9XX_CSR_SHPMSR 0x5ca +#define THEAD_C9XX_CSR_SHPMER 0x5cb +#define THEAD_C9XX_CSR_SL2CPID 0x5cc +#define THEAD_C9XX_CSR_SL2WP 0x5cd +#define THEAD_C9XX_CSR_SBEADDR 0x5d0 +#define THEAD_C9XX_CSR_SCYCLE 0x5e0 +#define THEAD_C9XX_CSR_SHPMCOUNTER1 0x5e1 +#define THEAD_C9XX_CSR_SHPMCOUNTER2 0x5e2 +#define THEAD_C9XX_CSR_SHPMCOUNTER3 0x5e3 +#define THEAD_C9XX_CSR_SHPMCOUNTER4 0x5e4 +#define THEAD_C9XX_CSR_SHPMCOUNTER5 0x5e5 +#define THEAD_C9XX_CSR_SHPMCOUNTER6 0x5e6 +#define THEAD_C9XX_CSR_SHPMCOUNTER7 0x5e7 +#define THEAD_C9XX_CSR_SHPMCOUNTER8 0x5e8 +#define THEAD_C9XX_CSR_SHPMCOUNTER9 0x5e9 +#define THEAD_C9XX_CSR_SHPMCOUNTER10 0x5ea +#define THEAD_C9XX_CSR_SHPMCOUNTER11 0x5eb +#define THEAD_C9XX_CSR_SHPMCOUNTER12 0x5ec +#define THEAD_C9XX_CSR_SHPMCOUNTER13 0x5ed +#define THEAD_C9XX_CSR_SHPMCOUNTER14 0x5ee +#define THEAD_C9XX_CSR_SHPMCOUNTER15 0x5ef +#define THEAD_C9XX_CSR_SHPMCOUNTER16 0x5f0 +#define THEAD_C9XX_CSR_SHPMCOUNTER17 0x5f1 +#define THEAD_C9XX_CSR_SHPMCOUNTER18 0x5f2 +#define THEAD_C9XX_CSR_SHPMCOUNTER19 0x5f3 +#define THEAD_C9XX_CSR_SHPMCOUNTER20 0x5f4 +#define THEAD_C9XX_CSR_SHPMCOUNTER21 0x5f5
platform/generic/include/thead_c9xx.h line 94
Quoted 10 lines
platform/generic/include/thead_c9xx.h new file +10
-0+#define THEAD_C9XX_CSR_SHPMCOUNTER22 0x5f6 +#define THEAD_C9XX_CSR_SHPMCOUNTER23 0x5f7 +#define THEAD_C9XX_CSR_SHPMCOUNTER24 0x5f8 +#define THEAD_C9XX_CSR_SHPMCOUNTER25 0x5f9 +#define THEAD_C9XX_CSR_SHPMCOUNTER26 0x5fa +#define THEAD_C9XX_CSR_SHPMCOUNTER27 0x5fb +#define THEAD_C9XX_CSR_SHPMCOUNTER28 0x5fc +#define THEAD_C9XX_CSR_SHPMCOUNTER29 0x5fd +#define THEAD_C9XX_CSR_SHPMCOUNTER30 0x5fe +#define THEAD_C9XX_CSR_SHPMCOUNTER31 0x5ff
Have we used the above CSR_SH* CSR in the patchset series?
platform/generic/include/thead_c9xx.h line 97
Quoted 3 lines
platform/generic/include/thead_c9xx.h new file +3
-0+ +/* T-HEAD C9xx U mode CSR. */ +#define THEAD_C9XX_CSR_FXCR 0x800
It's about the float point register, maybe it should not contain in the PMU patch.
platform/generic/include/thead_c9xx.h line 103
Quoted 6 lines
platform/generic/include/thead_c9xx.h new file +6
-0+ +/* T-HEAD C9xx MMU extentions. */ +#define THEAD_C9XX_CSR_SMIR 0x9c0 +#define THEAD_C9XX_CSR_SMEL 0x9c1 +#define THEAD_C9XX_CSR_SMEH 0x9c2 +#define THEAD_C9XX_CSR_SMCIR 0x9c3
Ditto.
Quoted 8 lines
platform/generic/include/thead_c9xx.h new file +8
-0+ +/* T-HEAD C9xx Security CSR(May be droped). */ +#define THEAD_C9XX_CSR_MEBR 0xbe0 +#define THEAD_C9XX_CSR_NT_MSTATUS 0xbe1 +#define THEAD_C9XX_CSR_NT_MIE 0xbe2 +#define THEAD_C9XX_CSR_NT_MTVEC 0xbe3 +#define THEAD_C9XX_CSR_NT_MTVT 0xbe4 +#define THEAD_C9XX_CSR_NT_MEPC 0xbe5
platform/generic/include/thead_c9xx.h line 121
Quoted 10 lines
platform/generic/include/thead_c9xx.h new file +10
-0+#define THEAD_C9XX_CSR_NT_MCAUSE 0xbe6 +#define THEAD_C9XX_CSR_NT_MIP 0xbe7 +#define THEAD_C9XX_CSR_NT_MINTSTATE 0xbe8 +#define THEAD_C9XX_CSR_NT_MXSTATUS 0xbe9 +#define THEAD_C9XX_CSR_NT_MEBR 0xbea +#define THEAD_C9XX_CSR_NT_MSP 0xbeb +#define THEAD_C9XX_CSR_T_USP 0xbec +#define THEAD_C9XX_CSR_T_MDCR 0xbed +#define THEAD_C9XX_CSR_T_MPCR 0xbee +#define THEAD_C9XX_CSR_PMPTEECFG 0xbef
Ditto
Quoted 9 lines
platform/generic/include/thead_c9xx.h new file +6
-1+ +/* T-HEAD C9xx MIP CSR extension */ +#define THEAD_C9XX_IRQ_PMU_OVF 17 +#define THEAD_C9XX_MIP_MOIP (_UL(1) << THEAD_C9XX_IRQ_PMU_OVF) + +#endif --2.35.1
Signature · 2 lines
Best Regards Guo Ren
PATCH v4 5/5 platform: generic: allwinner: add support for c9xx pmu
Hi,
Am Dienstag, 27. September 2022, 01:30:15 CEST schrieb Guo Ren:
Quoted 66 lines · Heiko Stuebner
Quoted 65 lines
With the T-HEAD C9XX cores being designed before or during ratification of the SSCOFPMF extension, they implement a PMU extension that behaves very similar but not equal to it by providing overflow interrupts though in a slightly different registers format.
The sun20i-d1 is using this core. So implement the necessary overrides to allow its pmu to be used via the standard sbi-pmu extension.
For now it's also the only soc using this core, so keep the additional code in the d1-space for now.
Signed-off-by Heiko Stuebner <[email protected]>--- platform/generic/allwinner/sun20i-d1.c | 72 ++++++++++++++ platform/generic/include/thead_c9xx.h | 127 +++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 platform/generic/include/thead_c9xx.hplatform/generic/allwinner/sun20i-d1.c +26
-0@@ -5,11 +5,13 @@*/ #include <platform_override.h> +#include <thead_c9xx.h> #include <sbi/riscv_io.h> #include <sbi/sbi_bitops.h> #include <sbi/sbi_ecall_interface.h> #include <sbi/sbi_error.h> #include <sbi/sbi_hsm.h> +#include <sbi/sbi_pmu.h> #include <sbi_utils/fdt/fdt_helper.h> #include <sbi_utils/irqchip/fdt_irqchip_plic.h> @@ -199,6 +201,75 @@ static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match)return 0 ; } +static void thead_c9xx_pmu_ctr_enable_irq (uint32_t ctr_idx) +{ +unsigned long val; +unsigned long mip_val; + +if (ctr_idx >=SBI_PMU_HW_CTR_MAX ) +return ; + + mip_val =csr_read (CSR_MIP ); +/** +* Clear out the OF bit so that next interrupt can be enabled. +* This should be done only when the corresponding overflow interrupt +* bit is cleared. That indicates that software has already handled the +* previous interrupts or the hardware yet to set an overflow interrupt. +* Otherwise, there will be race conditions where we may clear the bit +* the software is yet to handle the interrupt. +*/ +if (!(mip_val &THEAD_C9XX_MIP_MOIP )) { + val =csr_read (THEAD_C9XX_CSR_MCOUNTEROF ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTEROF , val); + } + +/**
Quoted 8 lines
platform/generic/allwinner/sun20i-d1.c static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match) · line 234
Quoted 7 lines
platform/generic/allwinner/sun20i-d1.c +7
-0+* SSCOFPMF uses the OF bit for enabling/disabling the interrupt, +* while the C9XX has designated enable bits. +* So enable per-counter interrupt on C9xx here. +*/ + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val |= (1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val);Use
csr_set
great idea. I've added this to my v5-branch but will wait a bit for more review comments to hopefully drop in :-)
Quoted 151 lines
platform/generic/allwinner/sun20i-d1.c static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match) · line 243
Quoted 9 lines
platform/generic/allwinner/sun20i-d1.c +9
-0+} + +static void thead_c9xx_pmu_ctr_disable_irq (uint32_t ctr_idx) +{ +unsigned long val; + + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val);
csr_clearQuoted 128 lines
platform/generic/allwinner/sun20i-d1.c +30
-0+} + +static int thead_c9xx_pmu_irq_bit (void ) +{ +return THEAD_C9XX_MIP_MOIP ; +} + +static void thead_c9xx_pmu_counter_data (unsigned int *count, +unsigned int *bits) +{ +/* auto-detection doesn't work on t-head c9xx cores */ + *count =29 ; + *bits =64 ; +} + +const struct sbi_pmu_device thead_c9xx_pmu_device = { + .hw_counter_enable_irq = thead_c9xx_pmu_ctr_enable_irq, + .hw_counter_disable_irq = thead_c9xx_pmu_ctr_disable_irq, + .hw_counter_irq_bit = thead_c9xx_pmu_irq_bit, + .hw_counter_data = thead_c9xx_pmu_counter_data, +}; + +static int sun20i_d1_extensions_init (const struct fdt_match *match) +{ +sbi_pmu_set_device (&thead_c9xx_pmu_device); + +return 0 ; +} +static const struct fdt_match sun20i_d1_match[] = { { .compatible ="allwinner,sun20i-d1" }, { },@@ -207,4 +278,5 @@ static const struct fdt_match sun20i_d1_match[] = {const struct platform_override sun20i_d1 = { .match_table = sun20i_d1_match, .final_init = sun20i_d1_final_init, + .extensions_init = sun20i_d1_extensions_init, };platform/generic/include/thead_c9xx.h new file +84
-0@@ -0,0 +1,127 @@ +#ifndef __RISCV_THEAD_C9XX_H____ +#define __RISCV_THEAD_C9XX_H____ + +/* T-HEAD C9xx M mode CSR. */ +#define THEAD_C9XX_CSR_MXSTATUS 0x7c0 +#define THEAD_C9XX_CSR_MHCR 0x7c1 +#define THEAD_C9XX_CSR_MCOR 0x7c2 +#define THEAD_C9XX_CSR_MCCR2 0x7c3 +#define THEAD_C9XX_CSR_MCER2 0x7c4 +#define THEAD_C9XX_CSR_MHINT 0x7c5 +#define THEAD_C9XX_CSR_MRMR 0x7c6 +#define THEAD_C9XX_CSR_MRVBR 0x7c7 +#define THEAD_C9XX_CSR_MCER 0x7c8 +#define THEAD_C9XX_CSR_MCOUNTERWEN 0x7c9 +#define THEAD_C9XX_CSR_MCOUNTERINTEN 0x7ca +#define THEAD_C9XX_CSR_MCOUNTEROF 0x7cb +#define THEAD_C9XX_CSR_MHINT2 0x7cc +#define THEAD_C9XX_CSR_MHINT3 0x7cd +#define THEAD_C9XX_CSR_MRADDR 0x7e0 +#define THEAD_C9XX_CSR_MEXSTATUS 0x7e1 +#define THEAD_C9XX_CSR_MNMICAUSE 0x7e2 +#define THEAD_C9XX_CSR_MNMIPC 0x7e3 +#define THEAD_C9XX_CSR_MHPMCR 0x7f0 +#define THEAD_C9XX_CSR_MHPMSR 0x7f1 +#define THEAD_C9XX_CSR_MHPMER 0x7f2 +#define THEAD_C9XX_CSR_MSMPR 0x7f3 +#define THEAD_C9XX_CSR_MTEECFG 0x7f4 +#define THEAD_C9XX_CSR_MZONEID 0x7f5 +#define THEAD_C9XX_CSR_ML2CPID 0x7f6 +#define THEAD_C9XX_CSR_ML2WP 0x7f7 +#define THEAD_C9XX_CSR_MDTCMCR 0x7f8 +#define THEAD_C9XX_CSR_USP 0x7d1 +#define THEAD_C9XX_CSR_MCINS 0x7d2 +#define THEAD_C9XX_CSR_MCINDEX 0x7d3 +#define THEAD_C9XX_CSR_MCDATA0 0x7d4 +#define THEAD_C9XX_CSR_MCDATA1 0x7d5 +#define THEAD_C9XX_CSR_MEICR 0x7d6 +#define THEAD_C9XX_CSR_MEICR2 0x7d7 +#define THEAD_C9XX_CSR_MBEADDR 0x7d8 +#define THEAD_C9XX_CSR_MCPUID 0xfc0 +#define THEAD_C9XX_CSR_MAPBADDR 0xfc1 +#define THEAD_C9XX_CSR_MWMSR 0xfc2 +#define THEAD_C9XX_CSR_MHALTCAUSE 0xfe0 +#define THEAD_C9XX_CSR_MDBGINFO 0xfe1 +#define THEAD_C9XX_CSR_MPCFIFO 0xfe2 + +/* T-HEAD C9xx S mode CSR. */ +#define THEAD_C9XX_CSR_SXSTATUS 0x5c0 +#define THEAD_C9XX_CSR_SHCR 0x5c1 +#define THEAD_C9XX_CSR_SCER2 0x5c2 +#define THEAD_C9XX_CSR_SCER 0x5c3 +#define THEAD_C9XX_CSR_SCOUNTERINTEN 0x5c4 +#define THEAD_C9XX_CSR_SCOUNTEROF 0x5c5 +#define THEAD_C9XX_CSR_SHINT 0x5c6 +#define THEAD_C9XX_CSR_SHINT2 0x5c7 +#define THEAD_C9XX_CSR_SHPMINHIBIT 0x5c8 +#define THEAD_C9XX_CSR_SHPMCR 0x5c9 +#define THEAD_C9XX_CSR_SHPMSR 0x5ca +#define THEAD_C9XX_CSR_SHPMER 0x5cb +#define THEAD_C9XX_CSR_SL2CPID 0x5cc +#define THEAD_C9XX_CSR_SL2WP 0x5cd +#define THEAD_C9XX_CSR_SBEADDR 0x5d0 +#define THEAD_C9XX_CSR_SCYCLE 0x5e0 +#define THEAD_C9XX_CSR_SHPMCOUNTER1 0x5e1 +#define THEAD_C9XX_CSR_SHPMCOUNTER2 0x5e2 +#define THEAD_C9XX_CSR_SHPMCOUNTER3 0x5e3 +#define THEAD_C9XX_CSR_SHPMCOUNTER4 0x5e4 +#define THEAD_C9XX_CSR_SHPMCOUNTER5 0x5e5 +#define THEAD_C9XX_CSR_SHPMCOUNTER6 0x5e6 +#define THEAD_C9XX_CSR_SHPMCOUNTER7 0x5e7 +#define THEAD_C9XX_CSR_SHPMCOUNTER8 0x5e8 +#define THEAD_C9XX_CSR_SHPMCOUNTER9 0x5e9 +#define THEAD_C9XX_CSR_SHPMCOUNTER10 0x5ea +#define THEAD_C9XX_CSR_SHPMCOUNTER11 0x5eb +#define THEAD_C9XX_CSR_SHPMCOUNTER12 0x5ec +#define THEAD_C9XX_CSR_SHPMCOUNTER13 0x5ed +#define THEAD_C9XX_CSR_SHPMCOUNTER14 0x5ee +#define THEAD_C9XX_CSR_SHPMCOUNTER15 0x5ef +#define THEAD_C9XX_CSR_SHPMCOUNTER16 0x5f0 +#define THEAD_C9XX_CSR_SHPMCOUNTER17 0x5f1 +#define THEAD_C9XX_CSR_SHPMCOUNTER18 0x5f2 +#define THEAD_C9XX_CSR_SHPMCOUNTER19 0x5f3 +#define THEAD_C9XX_CSR_SHPMCOUNTER20 0x5f4 +#define THEAD_C9XX_CSR_SHPMCOUNTER21 0x5f5platform/generic/include/thead_c9xx.h line 94
Quoted 10 lines
platform/generic/include/thead_c9xx.h new file +10
-0+#define THEAD_C9XX_CSR_SHPMCOUNTER22 0x5f6 +#define THEAD_C9XX_CSR_SHPMCOUNTER23 0x5f7 +#define THEAD_C9XX_CSR_SHPMCOUNTER24 0x5f8 +#define THEAD_C9XX_CSR_SHPMCOUNTER25 0x5f9 +#define THEAD_C9XX_CSR_SHPMCOUNTER26 0x5fa +#define THEAD_C9XX_CSR_SHPMCOUNTER27 0x5fb +#define THEAD_C9XX_CSR_SHPMCOUNTER28 0x5fc +#define THEAD_C9XX_CSR_SHPMCOUNTER29 0x5fd +#define THEAD_C9XX_CSR_SHPMCOUNTER30 0x5fe +#define THEAD_C9XX_CSR_SHPMCOUNTER31 0x5ffHave we used the above CSR_SH* CSR in the patchset series?
Quoted 5 lines
platform/generic/include/thead_c9xx.h line 97
Quoted 3 lines
platform/generic/include/thead_c9xx.h new file +3
-0+ +/* T-HEAD C9xx U mode CSR. */ +#define THEAD_C9XX_CSR_FXCR 0x800It's about the float point register, maybe it should not contain in the PMU patch.
My intention was to directly introduce one semi-complete header with the t-head extensions, so that people in the future don't need to look this up in some vendor tree when adding support for other stuff.
I guess I'll leave that to SBI people to decide if that is ok or if they want a minimal header instead.
Heiko
PATCH v4 5/5 platform: generic: allwinner: add support for c9xx pmu
Quoted 239 lines · Heiko St?bner
Hi,
Am Dienstag, 27. September 2022, 01:30:15 CEST schrieb Guo Ren:
Quoted 66 lines · Heiko Stuebner
Quoted 65 lines
With the T-HEAD C9XX cores being designed before or during ratification of the SSCOFPMF extension, they implement a PMU extension that behaves very similar but not equal to it by providing overflow interrupts though in a slightly different registers format.
The sun20i-d1 is using this core. So implement the necessary overrides to allow its pmu to be used via the standard sbi-pmu extension.
For now it's also the only soc using this core, so keep the additional code in the d1-space for now.
Signed-off-by Heiko Stuebner <[email protected]>--- platform/generic/allwinner/sun20i-d1.c | 72 ++++++++++++++ platform/generic/include/thead_c9xx.h | 127 +++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 platform/generic/include/thead_c9xx.hplatform/generic/allwinner/sun20i-d1.c +26
-0@@ -5,11 +5,13 @@*/ #include <platform_override.h> +#include <thead_c9xx.h> #include <sbi/riscv_io.h> #include <sbi/sbi_bitops.h> #include <sbi/sbi_ecall_interface.h> #include <sbi/sbi_error.h> #include <sbi/sbi_hsm.h> +#include <sbi/sbi_pmu.h> #include <sbi_utils/fdt/fdt_helper.h> #include <sbi_utils/irqchip/fdt_irqchip_plic.h> @@ -199,6 +201,75 @@ static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match)return 0 ; } +static void thead_c9xx_pmu_ctr_enable_irq (uint32_t ctr_idx) +{ +unsigned long val; +unsigned long mip_val; + +if (ctr_idx >=SBI_PMU_HW_CTR_MAX ) +return ; + + mip_val =csr_read (CSR_MIP ); +/** +* Clear out the OF bit so that next interrupt can be enabled. +* This should be done only when the corresponding overflow interrupt +* bit is cleared. That indicates that software has already handled the +* previous interrupts or the hardware yet to set an overflow interrupt. +* Otherwise, there will be race conditions where we may clear the bit +* the software is yet to handle the interrupt. +*/ +if (!(mip_val &THEAD_C9XX_MIP_MOIP )) { + val =csr_read (THEAD_C9XX_CSR_MCOUNTEROF ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTEROF , val); + } + +/** Quoted 8 lines
platform/generic/allwinner/sun20i-d1.c static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match) · line 234
Quoted 7 lines
platform/generic/allwinner/sun20i-d1.c +7
-0+* SSCOFPMF uses the OF bit for enabling/disabling the interrupt, +* while the C9XX has designated enable bits. +* So enable per-counter interrupt on C9xx here. +*/ + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val |= (1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val);Use
csr_setgreat idea. I've added this to my v5-branch but will wait a bit for more review comments to hopefully drop in :-)
Quoted 151 lines
platform/generic/allwinner/sun20i-d1.c static int sun20i_d1_final_init(bool cold_boot, const struct fdt_match *match) · line 243
Quoted 9 lines
platform/generic/allwinner/sun20i-d1.c +9
-0+} + +static void thead_c9xx_pmu_ctr_disable_irq (uint32_t ctr_idx) +{ +unsigned long val; + + val =csr_read (THEAD_C9XX_CSR_MCOUNTERINTEN ); + val &= ~(1 << ctr_idx); +csr_write (THEAD_C9XX_CSR_MCOUNTERINTEN , val);
csr_clearQuoted 128 lines
platform/generic/allwinner/sun20i-d1.c +30
-0+} + +static int thead_c9xx_pmu_irq_bit (void ) +{ +return THEAD_C9XX_MIP_MOIP ; +} + +static void thead_c9xx_pmu_counter_data (unsigned int *count, +unsigned int *bits) +{ +/* auto-detection doesn't work on t-head c9xx cores */ + *count =29 ; + *bits =64 ; +} + +const struct sbi_pmu_device thead_c9xx_pmu_device = { + .hw_counter_enable_irq = thead_c9xx_pmu_ctr_enable_irq, + .hw_counter_disable_irq = thead_c9xx_pmu_ctr_disable_irq, + .hw_counter_irq_bit = thead_c9xx_pmu_irq_bit, + .hw_counter_data = thead_c9xx_pmu_counter_data, +}; + +static int sun20i_d1_extensions_init (const struct fdt_match *match) +{ +sbi_pmu_set_device (&thead_c9xx_pmu_device); + +return 0 ; +} +static const struct fdt_match sun20i_d1_match[] = { { .compatible ="allwinner,sun20i-d1" }, { },@@ -207,4 +278,5 @@ static const struct fdt_match sun20i_d1_match[] = {const struct platform_override sun20i_d1 = { .match_table = sun20i_d1_match, .final_init = sun20i_d1_final_init, + .extensions_init = sun20i_d1_extensions_init, };platform/generic/include/thead_c9xx.h new file +84
-0@@ -0,0 +1,127 @@ +#ifndef __RISCV_THEAD_C9XX_H____ +#define __RISCV_THEAD_C9XX_H____ + +/* T-HEAD C9xx M mode CSR. */ +#define THEAD_C9XX_CSR_MXSTATUS 0x7c0 +#define THEAD_C9XX_CSR_MHCR 0x7c1 +#define THEAD_C9XX_CSR_MCOR 0x7c2 +#define THEAD_C9XX_CSR_MCCR2 0x7c3 +#define THEAD_C9XX_CSR_MCER2 0x7c4 +#define THEAD_C9XX_CSR_MHINT 0x7c5 +#define THEAD_C9XX_CSR_MRMR 0x7c6 +#define THEAD_C9XX_CSR_MRVBR 0x7c7 +#define THEAD_C9XX_CSR_MCER 0x7c8 +#define THEAD_C9XX_CSR_MCOUNTERWEN 0x7c9 +#define THEAD_C9XX_CSR_MCOUNTERINTEN 0x7ca +#define THEAD_C9XX_CSR_MCOUNTEROF 0x7cb +#define THEAD_C9XX_CSR_MHINT2 0x7cc +#define THEAD_C9XX_CSR_MHINT3 0x7cd +#define THEAD_C9XX_CSR_MRADDR 0x7e0 +#define THEAD_C9XX_CSR_MEXSTATUS 0x7e1 +#define THEAD_C9XX_CSR_MNMICAUSE 0x7e2 +#define THEAD_C9XX_CSR_MNMIPC 0x7e3 +#define THEAD_C9XX_CSR_MHPMCR 0x7f0 +#define THEAD_C9XX_CSR_MHPMSR 0x7f1 +#define THEAD_C9XX_CSR_MHPMER 0x7f2 +#define THEAD_C9XX_CSR_MSMPR 0x7f3 +#define THEAD_C9XX_CSR_MTEECFG 0x7f4 +#define THEAD_C9XX_CSR_MZONEID 0x7f5 +#define THEAD_C9XX_CSR_ML2CPID 0x7f6 +#define THEAD_C9XX_CSR_ML2WP 0x7f7 +#define THEAD_C9XX_CSR_MDTCMCR 0x7f8 +#define THEAD_C9XX_CSR_USP 0x7d1 +#define THEAD_C9XX_CSR_MCINS 0x7d2 +#define THEAD_C9XX_CSR_MCINDEX 0x7d3 +#define THEAD_C9XX_CSR_MCDATA0 0x7d4 +#define THEAD_C9XX_CSR_MCDATA1 0x7d5 +#define THEAD_C9XX_CSR_MEICR 0x7d6 +#define THEAD_C9XX_CSR_MEICR2 0x7d7 +#define THEAD_C9XX_CSR_MBEADDR 0x7d8 +#define THEAD_C9XX_CSR_MCPUID 0xfc0 +#define THEAD_C9XX_CSR_MAPBADDR 0xfc1 +#define THEAD_C9XX_CSR_MWMSR 0xfc2 +#define THEAD_C9XX_CSR_MHALTCAUSE 0xfe0 +#define THEAD_C9XX_CSR_MDBGINFO 0xfe1 +#define THEAD_C9XX_CSR_MPCFIFO 0xfe2 + +/* T-HEAD C9xx S mode CSR. */ +#define THEAD_C9XX_CSR_SXSTATUS 0x5c0 +#define THEAD_C9XX_CSR_SHCR 0x5c1 +#define THEAD_C9XX_CSR_SCER2 0x5c2 +#define THEAD_C9XX_CSR_SCER 0x5c3 +#define THEAD_C9XX_CSR_SCOUNTERINTEN 0x5c4 +#define THEAD_C9XX_CSR_SCOUNTEROF 0x5c5 +#define THEAD_C9XX_CSR_SHINT 0x5c6 +#define THEAD_C9XX_CSR_SHINT2 0x5c7 +#define THEAD_C9XX_CSR_SHPMINHIBIT 0x5c8 +#define THEAD_C9XX_CSR_SHPMCR 0x5c9 +#define THEAD_C9XX_CSR_SHPMSR 0x5ca +#define THEAD_C9XX_CSR_SHPMER 0x5cb +#define THEAD_C9XX_CSR_SL2CPID 0x5cc +#define THEAD_C9XX_CSR_SL2WP 0x5cd +#define THEAD_C9XX_CSR_SBEADDR 0x5d0 +#define THEAD_C9XX_CSR_SCYCLE 0x5e0 +#define THEAD_C9XX_CSR_SHPMCOUNTER1 0x5e1 +#define THEAD_C9XX_CSR_SHPMCOUNTER2 0x5e2 +#define THEAD_C9XX_CSR_SHPMCOUNTER3 0x5e3 +#define THEAD_C9XX_CSR_SHPMCOUNTER4 0x5e4 +#define THEAD_C9XX_CSR_SHPMCOUNTER5 0x5e5 +#define THEAD_C9XX_CSR_SHPMCOUNTER6 0x5e6 +#define THEAD_C9XX_CSR_SHPMCOUNTER7 0x5e7 +#define THEAD_C9XX_CSR_SHPMCOUNTER8 0x5e8 +#define THEAD_C9XX_CSR_SHPMCOUNTER9 0x5e9 +#define THEAD_C9XX_CSR_SHPMCOUNTER10 0x5ea +#define THEAD_C9XX_CSR_SHPMCOUNTER11 0x5eb +#define THEAD_C9XX_CSR_SHPMCOUNTER12 0x5ec +#define THEAD_C9XX_CSR_SHPMCOUNTER13 0x5ed +#define THEAD_C9XX_CSR_SHPMCOUNTER14 0x5ee +#define THEAD_C9XX_CSR_SHPMCOUNTER15 0x5ef +#define THEAD_C9XX_CSR_SHPMCOUNTER16 0x5f0 +#define THEAD_C9XX_CSR_SHPMCOUNTER17 0x5f1 +#define THEAD_C9XX_CSR_SHPMCOUNTER18 0x5f2 +#define THEAD_C9XX_CSR_SHPMCOUNTER19 0x5f3 +#define THEAD_C9XX_CSR_SHPMCOUNTER20 0x5f4 +#define THEAD_C9XX_CSR_SHPMCOUNTER21 0x5f5platform/generic/include/thead_c9xx.h line 94
Quoted 10 lines
platform/generic/include/thead_c9xx.h new file +10
-0+#define THEAD_C9XX_CSR_SHPMCOUNTER22 0x5f6 +#define THEAD_C9XX_CSR_SHPMCOUNTER23 0x5f7 +#define THEAD_C9XX_CSR_SHPMCOUNTER24 0x5f8 +#define THEAD_C9XX_CSR_SHPMCOUNTER25 0x5f9 +#define THEAD_C9XX_CSR_SHPMCOUNTER26 0x5fa +#define THEAD_C9XX_CSR_SHPMCOUNTER27 0x5fb +#define THEAD_C9XX_CSR_SHPMCOUNTER28 0x5fc +#define THEAD_C9XX_CSR_SHPMCOUNTER29 0x5fd +#define THEAD_C9XX_CSR_SHPMCOUNTER30 0x5fe +#define THEAD_C9XX_CSR_SHPMCOUNTER31 0x5ffHave we used the above CSR_SH* CSR in the patchset series?
Quoted 5 lines
platform/generic/include/thead_c9xx.h line 97
Quoted 3 lines
platform/generic/include/thead_c9xx.h new file +3
-0+ +/* T-HEAD C9xx U mode CSR. */ +#define THEAD_C9XX_CSR_FXCR 0x800It's about the float point register, maybe it should not contain in the PMU patch.
Quoted 7 lines
My intention was to directly introduce one semi-complete header with the t-head extensions, so that people in the future don't need to look this up in some vendor tree when adding support for other stuff.
I guess I'll leave that to SBI people to decide if that is ok or if they want a minimal header instead.
Okay, after csr_set/clear finished
Quoted 6 lines
Heiko
Signature · 2 lines
Best Regards Guo Ren