ARM: imx6: dh-imx6: Use sf update instead of sf erase and write
PATCH 1/1 ARM: imx6: dh-imx6: Use sf update instead of sf erase and write
With sf update fixed to support unaligned start offset, use plain sf update to update the bootloader in SPI NOR. This also helps avoid the case where not enough SPI NOR has been erased and the bootloader has been written to unerased area, and thus corrupted.
---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
--- include/configs/dh_imx6.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
include/configs/dh_imx6.h +1 -2
@@ -60,8 +60,7 @@"fdtfile=imx6q-dhcom-pdk2.dtb\0" \"update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \"load mmc 0:1 ${loadaddr} /boot/u-boot-with-spl.imx && " \ -"sf probe && sf erase 0x0 0x100000 && " \ -"sf write ${loadaddr} 0x400 ${filesize}\0" \ +"sf probe && sf update ${loadaddr} 0x400 ${filesize}\0" \BOOTENV #define BOOT_TARGET_DEVICES(func) \
Signature · 1 line
2.35.1
Quoted 19 lines · Marek Vasut
With sf update fixed to support unaligned start offset, use plain sf update to update the bootloader in SPI NOR. This also helps avoid the case where not enough SPI NOR has been erased and the bootloader has been written to unerased area, and thus corrupted.
Signed-off-by Marek Vasut <[email protected]>---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>--- include/configs/dh_imx6.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)include/configs/dh_imx6.h +0
-0
include/configs/dh_imx6.h line 66
Quoted 9 lines
include/configs/dh_imx6.h +1
-2@@ -60,8 +60,7 @@"fdtfile=imx6q-dhcom-pdk2.dtb\0" \"update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \"load mmc 0:1 ${loadaddr} /boot/u-boot-with-spl.imx && " \ -"sf probe && sf erase 0x0 0x100000 && " \ -"sf write ${loadaddr} 0x400 ${filesize}\0" \ +"sf probe && sf update ${loadaddr} 0x400 ${filesize}\0" \BOOTENV #define BOOT_TARGET_DEVICES(func) \
PATCH 1/1 ARM: imx6: dh-imx6: Use sf update instead of sf erase and write
In reply to Marek VasutQuoted 6 lines
With sf update fixed to support unaligned start offset, use plain sf update to update the bootloader in SPI NOR. This also helps avoid the case where not enough SPI NOR has been erased and the bootloader has been written to unerased area, and thus corrupted.
Signed-off-by Marek Vasut <[email protected]>Reviewed-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================