Skip to contentSkip to conversation

LSM: Module stacking for AppArmor

PATCH NAK Casey Schaufler 7 participants 68 messages Sep 27, 2022 – Mar 3, 2023 1 message not in the archive Page 1 of 2

Subsystems (32)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Casey Schaufler

author maintainer
#1 lore raw

v38 cover LSM: Module stacking for AppArmor

This patchset provides the changes required for the AppArmor security module to stack safely with any other. There are additional changes required for SELinux and Smack to coexist. These are primarily in the networking code and will be addressed after these changes are upstream.

v38: Rebase to 6.0-rc7
- Discard the implementation of /proc/self/attr/context
- Discard the implementation of /proc/self/attr/display_lsm
- Implement a system call lsm_self_attr() which provides
a complete list of LSM process attributes.
- Implement a system call lsm_module_list() which provides a list of the security modules active on the system.
- Implement a pair of prctl() options PR_LSM_ATTR_SET
and PR_LSM_ATTR_GET. These are used to control the LSM that provides the values in /proc/.../attr entries.
- Make more of the infrastructure data changes early in the patch set in support of the new system calls.
- Add a user interface header uapi/linux/lsm.h which contains the format of data provided by lsm_self_attr() and the integer LSM identifier values.
v37: Rebase to 5.19-rc3
- Audit changes should be complete, all comments have been addressed.
- Address indexing an empty array for the case where no built in security modules require data in struct lsmblob.
- Fix a few checkpatch complaints.
v36: Rebase to 5.19-rc1
- Yet another rework of the audit changes. Rearranging how the timestamp is managed allows auxiliary records to be generated correctly with a minimum of fuss.
- In the end no LSM interface scaffolding remains. Secids have been replaced with lsmblob structures in all cases, including IMA and NetLabel.
v35: Rebase to 5.18-rc2
- Address the case where CONFIG_SECURITY is enabled but
no security modules that use secid slots are included. The resulting blob.secid[0] instances, although never present in a call path, raised concerns.
- Address the case in interface_lsm where the BPF module returns -EINVAL, resulting in a failed setting of the value that would be otherwise allowed.
v34: Rebase to 5.18-rc1
- Incorporate feedback on the audit generation.
v33:
- Rework the supplimental audit record generation once more, this time taking pseudo-code provided by Paul Moore as a basis. The resulting code is considerably simpler and fits better with the existing code flow.
v32: Rebase to 5.17-rc2
- Incorporate additional feedback from v30.
v31: Rebase to 5.16-rc4
- Incorporate feedback from Paul Moore on the audit component changes.
v30: Rebase to 5.16-rc1
- Replace the integrity sub-system reuse of the audit subsystem event matching functions with IMA specific functions. This is done because audit needs to maintain information about multiple security modules in audit rules while IMA to restricts the information to a single security module.
- The binder hooks have been changed and are no longer called with sufficient information to identify the interface_lsm. Pass that information in the binder message, and use that in the compatibility decision.
- Refactor the audit changes.
v29: Rebase to 5.15-rc1
- Rework the supplimental audit record generation. Attach a list of supplimental data to the audit_buffer and generate the auxiliary records as needed on event end. This should be usable for other auxiliary data, such as container IDs. There is other ongoing audit work that will require integration with this.
v28: Rebase to 5.14-rc2
- Provide IMA rules bounds checking (patch 04)
- Quote contexts in MAC_TASK_CONTEXTS and MAC_OBJ_CONTEXTS audit records because of AppArmor's use of '=' in context values. (patch 22,23)
v27: Fixes for landlock (patch 02)
- Rework the subject audit record generation. This version is simpler and reflects feedback from Paul Moore. (patch 22)
v26: Rebase to 5.13-rc1
- Include the landlock security module.
- Accomodate change from security_task_getsecid() to security_task_getsecid_obj() and security_task_getsecid_subj().
v25: Rebase to 5.12-rc2
Incorporate feedback from v24
- The IMA team suggested improvements to the integrity rule processing.
v24: Rebase to 5.11-rc1
Incorporate feedback from v23
- Address the IMA team's concerns about "label collisions". A label collision occurs when there is ambiguity about which of multiple LSMs is being targeted in the definition of an integrity check rule. A system with Smack and AppArmor would be unable to distinguish which LSM is important to an integrity rule referrencing the label "unconfined" as that label is meaningful to both. Provide a boot option to specify which LSM will be used in IMA rules when multiple LSMs are present. (patch 04) Pull LSM "slot" identification from later audit patches in in support of this (patch 03).
- Pick up a few audit events that need to include supplimental subject context records that had been missed in the previous version.
v23: Rebase to 5.10-rc4
Incorporate feedback from v22
- Change /proc/*/attr/display to /proc/*/attr/interface_lsm to make the purpose clearer. (patch 0012)
- Include ABI documentation. (patch 0012, 0022)
- Introduce LSM documentation updates with the patches where the interfaces are added rather than at the end. (patch 0012, 0022)
Include more maintainers and mail lists in To: and Cc: directives.
v22: Rebase to 5.10-rc1
v21: Rebase to 5.9-rc4
Incorporate feedback from v20
- Further revert UDS SO_PEERSEC to use scaffolding around the interfaces that use lsmblobs and store only a single secid. The possibility of multiple security modules requiring data here is still a future problem.
- Incorporate Richard Guy Briggs' non-syscall auxiliary records patch (patch 0019-0021) in place of my "supplimental" records implementation. [I'm not sure I've given proper attestation. I will correct as appropriate]
v20: Rebase to 5.9-rc1
Change the BPF security module to use the lsmblob data. (patch 0002) Repair length logic in subject label processing (patch 0015) Handle -EINVAL from the empty BPF setprocattr hook (patch 0020) Correct length processing in append_ctx() (patch 0022)
v19: Rebase to 5.8-rc6
Incorporate feedback from v18
- Revert UDS SO_PEERSEC implementation to use lsmblobs directly, rather than allocating as needed. The correct treatment of out-of-memory conditions in the later case is difficult to define. (patch 0005)
- Use a size_t in append_ctx() (patch 0021)
- Fix a memory leak when creating compound contexts. (patch 0021) Fix build error when CONFIG_SECURITY isn't set (patch 0013) Fix build error when CONFIG_SECURITY isn't set (patch 0020) Fix build error when CONFIG_SECURITY isn't set (patch 0021)
v18: Rebase to 5.8-rc3
Incorporate feedback from v17
- Null pointer checking in UDS (patch 0005)
Match changes in IMA code (patch 0012)
Fix the behavior of LSM context supplimental audit
records so that there's always exactly one when it's appropriate for there to be one. This is a substantial change that requires extention of the audit_context beyond syscall events. (patch 0020)
v17: Rebase to 5.7-rc4
v16: Rebase to 5.6
Incorporate feedback from v15 - Thanks Stephen, Mimi and Paul
- Generally improve commit messages WRT scaffolding
- Comment ima_lsm_isset() (patch 0002)
- Some question may remain on IMA warning (patch 0002)
- Mark lsm_slot as __lsm_ro_after_init not __init_data (patch 0002)
- Change name of lsmblob variable in ima_match_rules() (patch 0003)
- Instead of putting a struct lsmblob into the unix_skb_parms structure put a pointer to an allocated instance. There is currently only space for 5 u32's in unix_skb_parms and it is likely to get even tighter. Fortunately, the lifecycle management of the allocated lsmblob is simple. (patch 0005)
- Dropped Acks due to the above change (patch 0005)
- Improved commentary on secmark labeling scaffolding. (patch 0006)
- Reduced secmark related labeling scaffolding. (patch 0006)
- Replace use of the zeroth entry of an lsmblob in scaffolding with a function lsmblob_value() to hopefully make it less obscure. (patch 0006)
- Convert security_secmark_relabel_packet to use lsmblob as this reduces much of the most contentious scaffolding. (patch 0006)
- Dropped Acks due to the above change (patch 0006)
- Added BUILD_BUG_ON() for CIPSO tag 6. (patch 0018)
- Reworked audit subject information. Instead of adding fields in the middle of existing records add a new record to the event. When a separate record is required use subj="?". (patch 0020)
- Dropped Acks due to the above change (patch 0020)
- Reworked audit object information. Instead of adding fields in the middle of existing records add a new record to the event. When a separate record is required use obj="?". (patch 0021)
- Dropped Acks due to the above change (patch 0021)
- Enhanced documentation (patch 0022)
- Removed unnecessary error code check in security_getprocattr() (patch 0021)
v15: Rebase to 5.6-rc1
- Revise IMA data use (patch 0002)
Incorporate feedback from v14
- Fix lockdown module registration naming (patch 0002)
- Revise how /proc/self/attr/context is gathered. (patch 0022)
- Revise access modes on /proc/self/attr/context. (patch 0022)
- Revise documentation on LSM external interfaces. (patch 0022)
v14: Rebase to 5.5-rc5
Incorporate feedback from v13
- Use an array of audit rules (patch 0002)
- Significant change, removed Acks (patch 0002)
- Remove unneeded include (patch 0013)
- Use context.len correctly (patch 0015)
- Reorder code to be more sensible (patch 0016)
- Drop SO_PEERCONTEXT as it's not needed yet (patch 0023)
v13: Rebase to 5.5-rc2
Incorporate feedback from v12
- Print lsmblob size with %z (Patch 0002)
- Convert lockdown LSM initialization. (Patch 0002)
- Restore error check in nft_secmark_compute_secid (Patch 0006)
- Correct blob scaffolding in ima_must_appraise() (Patch 0009)
- Make security_setprocattr() clearer (Patch 0013)
- Use lsm_task_display more widely (Patch 0013)
- Use passed size in lsmcontext_init() (Patch 0014)
- Don't add a smack_release_secctx() hook (Patch 0014)
- Don't print warning in security_release_secctx() (Patch 0014)
- Don't duplicate the label in nfs4_label_init_security() (Patch 0016)
- Remove reviewed-by as code has significant change (Patch 0016)
- Send the entire lsmblob for Tag 6 (Patch 0019)
- Fix description of socket_getpeersec_stream parameters (Patch 0023)
- Retain LSMBLOB_FIRST. What was I thinking? (Patch 0023)
- Add compound context to LSM documentation (Patch 0023)
v12: Rebase to 5.5-rc1
Fixed a couple of incorrect contractions in the text.
v11: Rebase to 5.4-rc6
Incorporate feedback from v10
- Disambiguate reading /proc/.../attr/display by restricting all use of the interface to the current process.
- Fix a merge error in AppArmor's display attribute check
v10: Ask the security modules if the display can be changed.
v9: There is no version 9
v8: Incorporate feedback from v7
- Minor clean-up in display value management
- refactor "compound" context creation to use a common append_ctx() function.
v7: Incorporate feedback from v6
- Make setting the display a privileged operation. The availability of compound contexts reduces the need for setting the display.
v6: Incorporate feedback from v5
- Add subj_<lsm>= and obj_<lsm>= fields to audit records
- Add /proc/.../attr/context to get the full context in lsmname\0value\0... format as suggested by Simon McVittie
- Add SO_PEERCONTEXT for getsockopt() to get the full context in the same format, also suggested by Simon McVittie.
- Add /sys/kernel/security/lsm_display_default to provide the display default value.
v5: Incorporate feedback from v4
- Initialize the lsmcontext in security_secid_to_secctx()
- Clear the lsmcontext in all security_release_secctx() cases
- Don't use the "display" on strictly internal context interfaces.
- The SELinux binder hooks check for cases where the context "display" isn't compatible with SELinux.
v4: Incorporate feedback from v3
- Mark new lsm_<blob>_alloc functions static
- Replace the lsm and slot fields of the security_hook_list with a pointer to a LSM allocated lsm_id structure. The LSM identifies if it needs a slot explicitly. Use the lsm_id rather than make security_add_hooks return the slot value.
- Validate slot values used in security.c
- Reworked the "display" process attribute handling so that it works right and doesn't use goofy list processing.
- fix display value check in dentry_init_security
- Replace audit_log of secids with '?' instead of deleting the audit log
v3: Incorporate feedback from v2
- Make lsmblob parameter and variable names more meaningful, changing "le" and "l" to "blob".
- Improve consistency of constant naming.
- Do more sanity checking during LSM initialization.
- Be a bit clearer about what is temporary scaffolding.
- Rather than clutter security_getpeersec_dgram with otherwise unnecessary checks remove the apparmor
stub, which does nothing useful.

Patch 01 changes the LSM registration interface to pass a structure lsm_id containing the name of the module instead of just the LSM name itself.

Patch 02 introduces uapi/linux/lsm.h and numeric LSM identifiers. The numeric ID is added to the lsm_id structure.

Patch 03 Adds the information about which process attributes are supported by each LSM to the lsm_id structure.

Patch 04 introduces a table of LSM attribute data.

Patch 05 changes security_[gs]etprocattr() to use the LSM ID rather than the LSM name.

Patch 06 implements the lsm_self_attr() system call.

Patch 07 separates the audit rule processing from the integrity rule processing. They were never really the same, but void pointers could hide that. The changes following use the rule pointers differently in audit and IMA, so keeping the code common is not a good idea.

Patch 08 moves management of the sock security blob from the individual modules to the infrastructure.

Patches 09-10 introduce a structure "lsmblob" that will gradually replace the "secid" as a shorthand for security module information. At this point lsmblob contains an array of u32 secids, one "slot" for each of the security modules compiled into the kernel that used secids. A "slot" is allocated when a security module requests one.

Patch 11 provides mechanism for the IMA subsystem to identify explicitly which LSM is subject to IMA policy. This includes a boot option for specifying the default and an additional option in IMA rules "lsm=".

Patches 12-19 change LSM interfaces to use the lsmblob instead of secids. It is important that the lsmblob be a fixed size entity that does not have to be allocated. Several of the places where it is used would have performance and/or locking issues with dynamic allocation.

Patch 20 provides a mechanism for a process to identify which security module's hooks should be used when displaying or converting a security context string. A new prctl() options PR_LSM_ATTR_[GS]ET get and set which security module to show. Setting the value requires that all modules using the /proc interfaces allow the transition. The interface LSM of other processess can be neither read nor written.

Patch 21 Starts the process of changing how a security context is represented. Since it is possible for a security context to have been generated by more than one security module it is now necessary to note which module created a security context so that the correct "release" hook can be called. There are several places where the module that created a security context cannot be inferred.

This is achieved by introducing a "lsmcontext" structure which contains the context string, its length and the "slot" number of the security module that created it. The security_release_secctx() interface is changed, replacing the (string,len) pointer pair with a lsmcontext pointer.

Patches 22-25 convert the security interfaces from (string,len) pointer pairs to a lsmcontext pointer. The slot number identifying the creating module is added by the infrastructure. Where the security context is stored for extended periods the data type is changed.

Patch 26 converts the Netlabel code to save lsmblob structures instead of secids. This is not strictly necessary as there can only be one security module that uses Netlabel at this point. Using a lsmblob is much cleaner, as the interfaces that use the data have all been converted.

Patch 27 adds checks to the binder hooks which verify that both ends of a transaction use the same interface LSM.

Patch 28 adds a parameter to security_secid_to_secctx() that indicates which of the security modules should be used to provide the context.

Patches 29-33 update the audit system to better handle auxiliary records. This requires rearranging the timestamp and serial number handling. The skb pointer used to collect audit data is replaced by a list of skb pointers.

Patch 34 adds a supplimental audit record for subject LSM data when there are multiple security modules with such data. The AUDIT_MAC_TASK_CONTEXTS record is used in conjuction with a "subj=?" field to identify the subject data. The AUDIT_MAC_TASK_CONTEXTS record identifies the security module with the data: subj_selinux=xyz_t subj_apparmor=abc.

An example of the MAC_TASK_CONTEXTS (1420) record is:

    type=UNKNOWN[1420]
    msg=audit(1600880931.832:113)
    subj_apparmor==unconfined
    subj_smack=_

Patch 35 adds a supplimental audit record for object LSM data when there are multiple security modules with such data. The AUDIT_MAC_OBJ_CONTEXTS record is used in conjuction The with a "obj=?" field to identify the object data.
The AUDIT_MAC_OBJ_CONTEXTS record identifies the security module with the data: obj_selinux="xyz_t obj_apparmor="abc". While AUDIT_MAC_TASK_CONTEXTS records will always contain an entry for each possible security modules, AUDIT_MAC_OBJ_CONTEXTS records will only contain entries for security modules for which the object in question has data.

An example of the MAC_OBJ_CONTEXTS (1421) record is:

    type=UNKNOWN[1421]
    msg=audit(1601152467.009:1050):
    obj_selinux=unconfined_u:object_r:user_home_t:s0

Patches 36-37 clean out scaffolding code.

With all interference on the AppArmor hooks removed, Patch 38 removes the exclusive bit from AppArmor. An unnecessary stub hook was also removed.

Patch 39 adds a system call lsm_module_list() that provides a set of integer LSM ID values describing what is active on the system.

The Ubuntu project is using an earlier version of this patchset in their distribution to enable stacking for containers.

Performance measurements to date have the change within the "noise". The sockperf and dbench results are on the order of 0.2% to 0.8% difference, with better performance being as common as worse. The benchmarks were run with AppArmor and Smack on Ubuntu.

https://github.com/cschaufler/lsm-stacking.git#stack-6.0-rc7-38

Casey Schaufler (39):
LSM: Identify modules by more than name
LSM: Add an LSM identifier for external use
LSM: Identify the process attributes for each module
LSM: Maintain a table of LSM attribute data
proc: Use lsmids instead of lsm names for attrs
LSM: lsm_self_attr syscall for LSM self attributes
integrity: disassociate ima_filter_rule from security_audit_rule
LSM: Infrastructure management of the sock security
LSM: Add the lsmblob data structure.
LSM: provide lsm name and id slot mappings
IMA: avoid label collisions with stacked LSMs
LSM: Use lsmblob in security_audit_rule_match
LSM: Use lsmblob in security_kernel_act_as
LSM: Use lsmblob in security_secctx_to_secid
LSM: Use lsmblob in security_secid_to_secctx
LSM: Use lsmblob in security_ipc_getsecid
LSM: Use lsmblob in security_current_getsecid
LSM: Use lsmblob in security_inode_getsecid
LSM: Use lsmblob in security_cred_getsecid
LSM: Specify which LSM to display
LSM: Ensure the correct LSM context releaser
LSM: Use lsmcontext in security_secid_to_secctx
LSM: Use lsmcontext in security_inode_getsecctx
Use lsmcontext in security_dentry_init_security
LSM: security_secid_to_secctx in netlink netfilter
NET: Store LSM netlabel data in a lsmblob
binder: Pass LSM identifier for confirmation
LSM: security_secid_to_secctx module selection
Audit: Keep multiple LSM data in audit_names
Audit: Create audit_stamp structure
LSM: Add a function to report multiple LSMs
Audit: Allow multiple records in an audit_buffer
Audit: Add record for multiple task security contexts
audit: multiple subject lsm values for netlabel
Audit: Add record for multiple object contexts
netlabel: Use a struct lsmblob in audit data
LSM: Removed scaffolding function lsmcontext_init
AppArmor: Remove the exclusive flag
LSM: Create lsm_module_list system call

 Documentation/ABI/testing/ima_policy    |   8 +-
 arch/x86/entry/syscalls/syscall_64.tbl  |   2 +
 drivers/android/binder.c                |  47 ++-
 drivers/android/binder_internal.h       |   1 +
 fs/ceph/super.h                         |   3 +-
 fs/ceph/xattr.c                         |  15 +-
 fs/fuse/dir.c                           |  35 +-
 fs/nfs/dir.c                            |   2 +-
 fs/nfs/inode.c                          |  17 +-
 fs/nfs/internal.h                       |   8 +-
 fs/nfs/nfs4proc.c                       |  14 +-
 fs/nfs/nfs4xdr.c                        |  22 +-
 fs/nfsd/nfs4xdr.c                       |  20 +-
 fs/proc/base.c                          |  29 +-
 fs/proc/internal.h                      |   2 +-
 include/linux/audit.h                   |  21 +-
 include/linux/cred.h                    |   3 +-
 include/linux/lsm_hooks.h               |  15 +-
 include/linux/nfs4.h                    |   8 +-
 include/linux/nfs_fs.h                  |   2 +-
 include/linux/security.h                | 292 +++++++++++--
 include/linux/syscalls.h                |   2 +
 include/net/netlabel.h                  |  10 +-
 include/net/scm.h                       |  15 +-
 include/uapi/asm-generic/unistd.h       |   8 +-
 include/uapi/linux/audit.h              |   2 +
 include/uapi/linux/lsm.h                |  67 +++
 include/uapi/linux/prctl.h              |   4 +
 kernel/audit.c                          | 261 +++++++++---
 kernel/audit.h                          |  18 +-
 kernel/auditfilter.c                    |  29 +-
 kernel/auditsc.c                        | 160 +++----
 kernel/cred.c                           |  12 +-
 kernel/sys_ni.c                         |   4 +
 net/ipv4/cipso_ipv4.c                   |  26 +-
 net/ipv4/ip_sockglue.c                  |  12 +-
 net/netfilter/nf_conntrack_netlink.c    |  24 +-
 net/netfilter/nf_conntrack_standalone.c |  11 +-
 net/netfilter/nfnetlink_queue.c         |  38 +-
 net/netfilter/nft_meta.c                |  10 +-
 net/netfilter/xt_SECMARK.c              |   7 +-
 net/netlabel/netlabel_kapi.c            |   6 +-
 net/netlabel/netlabel_unlabeled.c       |  98 +++--
 net/netlabel/netlabel_unlabeled.h       |   2 +-
 net/netlabel/netlabel_user.c            |  10 +-
 net/netlabel/netlabel_user.h            |   2 +-
 security/Makefile                       |   1 +
 security/apparmor/include/apparmor.h    |   3 +-
 security/apparmor/include/net.h         |   6 +-
 security/apparmor/lsm.c                 | 110 ++---
 security/apparmor/net.c                 |   2 +-
 security/bpf/hooks.c                    |  14 +-
 security/commoncap.c                    |   9 +-
 security/integrity/ima/ima.h            |  32 +-
 security/integrity/ima/ima_api.c        |   6 +-
 security/integrity/ima/ima_appraise.c   |  11 +-
 security/integrity/ima/ima_main.c       |  62 +--
 security/integrity/ima/ima_policy.c     |  92 +++-
 security/landlock/cred.c                |   2 +-
 security/landlock/fs.c                  |   2 +-
 security/landlock/ptrace.c              |   2 +-
 security/landlock/setup.c               |   7 +
 security/landlock/setup.h               |   1 +
 security/loadpin/loadpin.c              |  10 +-
 security/lockdown/lockdown.c            |   9 +-
 security/lsm_syscalls.c                 | 206 +++++++++
 security/safesetid/lsm.c                |  10 +-
 security/security.c                     | 539 +++++++++++++++++++++---
 security/selinux/hooks.c                | 115 +++--
 security/selinux/include/classmap.h     |   3 +-
 security/selinux/include/objsec.h       |   5 +
 security/selinux/include/security.h     |   1 +
 security/selinux/netlabel.c             |  25 +-
 security/selinux/ss/services.c          |   4 +-
 security/smack/smack.h                  |   6 +
 security/smack/smack_access.c           |   2 +-
 security/smack/smack_lsm.c              |  85 ++--
 security/smack/smack_netfilter.c        |   4 +-
 security/smack/smackfs.c                |  12 +-
 security/tomoyo/tomoyo.c                |  10 +-
 security/yama/yama_lsm.c                |   9 +-
 81 files changed, 2063 insertions(+), 758 deletions(-)
 create mode 100644 include/uapi/linux/lsm.h
 create mode 100644 security/lsm_syscalls.c
Signature · 1 line
2.37.3
author maintainer
#2 lore raw

PATCH v38 1/39 LSM: Identify modules by more than name

Create a struct lsm_id to contain identifying information about Linux Security Modules (LSMs). At inception this contains a single member, which is the name of the module. Change the security_add_hooks() interface to use this structure. Change the individual modules to maintain their own struct lsm_id and pass it to security_add_hooks().

---
 include/linux/lsm_hooks.h    | 11 +++++++++--
 security/apparmor/lsm.c      |  6 +++++-
 security/bpf/hooks.c         | 11 ++++++++++-
 security/commoncap.c         |  6 +++++-
 security/landlock/cred.c     |  2 +-
 security/landlock/fs.c       |  2 +-
 security/landlock/ptrace.c   |  2 +-
 security/landlock/setup.c    |  4 ++++
 security/landlock/setup.h    |  1 +
 security/loadpin/loadpin.c   |  7 ++++++-
 security/lockdown/lockdown.c |  6 +++++-
 security/safesetid/lsm.c     |  7 ++++++-
 security/security.c          | 12 ++++++------
 security/selinux/hooks.c     |  7 ++++++-
 security/smack/smack_lsm.c   |  6 +++++-
 security/tomoyo/tomoyo.c     |  7 ++++++-
 security/yama/yama_lsm.c     |  6 +++++-
 17 files changed, 82 insertions(+), 21 deletions(-)
include/linux/lsm_hooks.h +9 -2
index 3aa6030302f5..23054881eb08 100644
@@ -1598,6 +1598,13 @@ struct security_hook_heads {
 	#undef LSM_HOOK
 } __randomize_layout;
 
+/*
+ * Information that identifies a security module.
+ */
+struct lsm_id {
+	const char	*lsm;		/* Name of the LSM */
+};
+
 /*
  * Security module hook list structure.
  * For use with generic list macros for common operations.
@@ -1606,7 +1613,7 @@ struct security_hook_list {
 	struct hlist_node		list;
 	struct hlist_head		*head;
 	union security_list_options	hook;
-	const char			*lsm;
+	struct lsm_id			*lsmid;
 } __randomize_layout;
 
 /*
@@ -1641,7 +1648,7 @@ extern struct security_hook_heads security_hook_heads;
 extern char *lsm_names;
 
 extern void security_add_hooks(struct security_hook_list *hooks, int count,
-				const char *lsm);
+			       struct lsm_id *lsmid);
 
 #define LSM_FLAG_LEGACY_MAJOR	BIT(0)
 #define LSM_FLAG_EXCLUSIVE	BIT(1)
security/apparmor/lsm.c +5 -1
index e29cade7b662..b71f7d4159d7 100644
@@ -1202,6 +1202,10 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
 	.lbs_task = sizeof(struct aa_task_ctx),
 };
 
+static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
+	.lsm      = "apparmor",
+};
+
 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(ptrace_access_check, apparmor_ptrace_access_check),
 	LSM_HOOK_INIT(ptrace_traceme, apparmor_ptrace_traceme),
@@ -1897,7 +1901,7 @@ static int __init apparmor_init(void)
 		goto buffers_out;
 	}
 	security_add_hooks(apparmor_hooks, ARRAY_SIZE(apparmor_hooks),
-				"apparmor");
+				&apparmor_lsmid);
 
 	/* Report that AppArmor successfully initialized */
 	apparmor_initialized = 1;
security/bpf/hooks.c +10 -1
index e5971fa74fd7..e50de3abfde2 100644
@@ -15,9 +15,18 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(task_free, bpf_task_storage_free),
 };
 
+/*
+ * slot has to be LSMBLOB_NEEDED because some of the hooks
+ * supplied by this module require a slot.
+ */
+struct lsm_id bpf_lsmid __lsm_ro_after_init = {
+	.lsm      = "bpf",
+};
+
 static int __init bpf_lsm_init(void)
 {
-	security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks), "bpf");
+	security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks),
+			   &bpf_lsmid);
 	pr_info("LSM support for eBPF active\n");
 	return 0;
 }
security/commoncap.c +5 -1
index 5fc8986c3c77..dab1b5f5e6aa 100644
@@ -1446,6 +1446,10 @@ int cap_mmap_file(struct file *file, unsigned long reqprot,
 
 #ifdef CONFIG_SECURITY
 
+static struct lsm_id capability_lsmid __lsm_ro_after_init = {
+	.lsm      = "capability",
+};
+
 static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(capable, cap_capable),
 	LSM_HOOK_INIT(settime, cap_settime),
@@ -1470,7 +1474,7 @@ static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
 static int __init capability_init(void)
 {
 	security_add_hooks(capability_hooks, ARRAY_SIZE(capability_hooks),
-				"capability");
+			   &capability_lsmid);
 	return 0;
 }
 
security/landlock/cred.c +1 -1
index ec6c37f04a19..2eb1d65f10d6 100644
@@ -42,5 +42,5 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
 __init void landlock_add_cred_hooks(void)
 {
 	security_add_hooks(landlock_hooks, ARRAY_SIZE(landlock_hooks),
-			   LANDLOCK_NAME);
+			   &landlock_lsmid);
 }
security/landlock/fs.c +1 -1
index a9dbd99d9ee7..b1515fc67d57 100644
@@ -1201,5 +1201,5 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
 __init void landlock_add_fs_hooks(void)
 {
 	security_add_hooks(landlock_hooks, ARRAY_SIZE(landlock_hooks),
-			   LANDLOCK_NAME);
+			   &landlock_lsmid);
 }
security/landlock/ptrace.c +1 -1
index 4c5b9cd71286..eab35808f395 100644
@@ -116,5 +116,5 @@ static struct security_hook_list landlock_hooks[] __lsm_ro_after_init = {
 __init void landlock_add_ptrace_hooks(void)
 {
 	security_add_hooks(landlock_hooks, ARRAY_SIZE(landlock_hooks),
-			   LANDLOCK_NAME);
+			   &landlock_lsmid);
 }
security/landlock/setup.c +4 -0
index f8e8e980454c..fc7b69c5839e 100644
@@ -23,6 +23,10 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
 	.lbs_superblock = sizeof(struct landlock_superblock_security),
 };
 
+struct lsm_id landlock_lsmid __lsm_ro_after_init = {
+	.lsm      = LANDLOCK_NAME,
+};
+
 static int __init landlock_init(void)
 {
 	landlock_add_cred_hooks();
security/landlock/setup.h +1 -0
index 1daffab1ab4b..38bce5b172dc 100644
@@ -14,5 +14,6 @@
 extern bool landlock_initialized;
 
 extern struct lsm_blob_sizes landlock_blob_sizes;
+extern struct lsm_id landlock_lsmid;
 
 #endif /* _SECURITY_LANDLOCK_SETUP_H */
security/loadpin/loadpin.c +6 -1
index 44521582dcba..7e5c897ccbb2 100644
@@ -195,6 +195,10 @@ static int loadpin_load_data(enum kernel_load_data_id id, bool contents)
 	return loadpin_read_file(NULL, (enum kernel_read_file_id) id, contents);
 }
 
+static struct lsm_id loadpin_lsmid __lsm_ro_after_init = {
+	.lsm      = "loadpin",
+};
+
 static struct security_hook_list loadpin_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(sb_free_security, loadpin_sb_free_security),
 	LSM_HOOK_INIT(kernel_read_file, loadpin_read_file),
@@ -242,7 +246,8 @@ static int __init loadpin_init(void)
 	pr_info("ready to pin (currently %senforcing)\n",
 		enforce ? "" : "not ");
 	parse_exclude();
-	security_add_hooks(loadpin_hooks, ARRAY_SIZE(loadpin_hooks), "loadpin");
+	security_add_hooks(loadpin_hooks, ARRAY_SIZE(loadpin_hooks),
+			   &loadpin_lsmid);
 
 	return 0;
 }
security/lockdown/lockdown.c +5 -1
index 87cbdc64d272..2af4bff8d101 100644
@@ -75,6 +75,10 @@ static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(locked_down, lockdown_is_locked_down),
 };
 
+static struct lsm_id lockdown_lsmid __lsm_ro_after_init = {
+	.lsm     = "lockdown",
+};
+
 static int __init lockdown_lsm_init(void)
 {
 #if defined(CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY)
@@ -83,7 +87,7 @@ static int __init lockdown_lsm_init(void)
 	lock_kernel_down("Kernel configuration", LOCKDOWN_CONFIDENTIALITY_MAX);
 #endif
 	security_add_hooks(lockdown_hooks, ARRAY_SIZE(lockdown_hooks),
-			   "lockdown");
+			   &lockdown_lsmid);
 	return 0;
 }
 
security/safesetid/lsm.c +6 -1
index e806739f7868..3a94103f3c5b 100644
@@ -261,6 +261,10 @@ static int safesetid_task_fix_setgroups(struct cred *new, const struct cred *old
 	return 0;
 }
 
+static struct lsm_id safesetid_lsmid __lsm_ro_after_init = {
+	.lsm      = "safesetid",
+};
+
 static struct security_hook_list safesetid_security_hooks[] = {
 	LSM_HOOK_INIT(task_fix_setuid, safesetid_task_fix_setuid),
 	LSM_HOOK_INIT(task_fix_setgid, safesetid_task_fix_setgid),
@@ -271,7 +275,8 @@ static struct security_hook_list safesetid_security_hooks[] = {
 static int __init safesetid_security_init(void)
 {
 	security_add_hooks(safesetid_security_hooks,
-			   ARRAY_SIZE(safesetid_security_hooks), "safesetid");
+			   ARRAY_SIZE(safesetid_security_hooks),
+			   &safesetid_lsmid);
 
 	/* Report that SafeSetID successfully initialized */
 	safesetid_initialized = 1;
security/security.c +6 -6
index 4b95de24bc8d..ff7fda4ffa43 100644
@@ -474,17 +474,17 @@ static int lsm_append(const char *new, char **result)
  * security_add_hooks - Add a modules hooks to the hook lists.
  * @hooks: the hooks to add
  * @count: the number of hooks to add
- * @lsm: the name of the security module
+ * @lsmid: the identification information for the security module
  *
  * Each LSM has to register its hooks with the infrastructure.
  */
 void __init security_add_hooks(struct security_hook_list *hooks, int count,
-				const char *lsm)
+			       struct lsm_id *lsmid)
 {
 	int i;
 
 	for (i = 0; i < count; i++) {
-		hooks[i].lsm = lsm;
+		hooks[i].lsmid = lsmid;
 		hlist_add_tail_rcu(&hooks[i].list, hooks[i].head);
 	}
 
@@ -493,7 +493,7 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
 	 * and fix this up afterwards.
 	 */
 	if (slab_is_available()) {
-		if (lsm_append(lsm, &lsm_names) < 0)
+		if (lsm_append(lsmid->lsm, &lsm_names) < 0)
 			panic("%s - Cannot get early memory.\n", __func__);
 	}
 }
@@ -2063,7 +2063,7 @@ int security_getprocattr(struct task_struct *p, const char *lsm, char *name,
 	struct security_hook_list *hp;
 
 	hlist_for_each_entry(hp, &security_hook_heads.getprocattr, list) {
-		if (lsm != NULL && strcmp(lsm, hp->lsm))
+		if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
 			continue;
 		return hp->hook.getprocattr(p, name, value);
 	}
@@ -2076,7 +2076,7 @@ int security_setprocattr(const char *lsm, const char *name, void *value,
 	struct security_hook_list *hp;
 
 	hlist_for_each_entry(hp, &security_hook_heads.setprocattr, list) {
-		if (lsm != NULL && strcmp(lsm, hp->lsm))
+		if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
 			continue;
 		return hp->hook.setprocattr(name, value, size);
 	}
security/selinux/hooks.c +6 -1
index 03bca97c8b29..5e4938f3ce11 100644
@@ -7012,6 +7012,10 @@ static int selinux_uring_cmd(struct io_uring_cmd *ioucmd)
 }
 #endif /* CONFIG_IO_URING */
 
+static struct lsm_id selinux_lsmid __lsm_ro_after_init = {
+	.lsm      = "selinux",
+};
+
 /*
  * IMPORTANT NOTE: When adding new hooks, please be careful to keep this order:
  * 1. any hooks that don't belong to (2.) or (3.) below,
@@ -7331,7 +7335,8 @@ static __init int selinux_init(void)
 
 	hashtab_cache_init();
 
-	security_add_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks), "selinux");
+	security_add_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks),
+			   &selinux_lsmid);
 
 	if (avc_add_callback(selinux_netcache_avc_callback, AVC_CALLBACK_RESET))
 		panic("SELinux: Unable to register AVC netcache callback\n");
security/smack/smack_lsm.c +5 -1
index bffccdc494cb..5d8bc13feb09 100644
@@ -4774,6 +4774,10 @@ struct lsm_blob_sizes smack_blob_sizes __lsm_ro_after_init = {
 	.lbs_superblock = sizeof(struct superblock_smack),
 };
 
+static struct lsm_id smack_lsmid __lsm_ro_after_init = {
+	.lsm      = "smack",
+};
+
 static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(ptrace_access_check, smack_ptrace_access_check),
 	LSM_HOOK_INIT(ptrace_traceme, smack_ptrace_traceme),
@@ -4976,7 +4980,7 @@ static __init int smack_init(void)
 	/*
 	 * Register with LSM
 	 */
-	security_add_hooks(smack_hooks, ARRAY_SIZE(smack_hooks), "smack");
+	security_add_hooks(smack_hooks, ARRAY_SIZE(smack_hooks), &smack_lsmid);
 	smack_enabled = 1;
 
 	pr_info("Smack:  Initializing.\n");
security/tomoyo/tomoyo.c +6 -1
index 71e82d855ebf..38342c1fa4bc 100644
@@ -530,6 +530,10 @@ static void tomoyo_task_free(struct task_struct *task)
 	}
 }
 
+static struct lsm_id tomoyo_lsmid __lsm_ro_after_init = {
+	.lsm      = "tomoyo",
+};
+
 /*
  * tomoyo_security_ops is a "struct security_operations" which is used for
  * registering TOMOYO.
@@ -582,7 +586,8 @@ static int __init tomoyo_init(void)
 	struct tomoyo_task *s = tomoyo_task(current);
 
 	/* register ourselves with the security framework */
-	security_add_hooks(tomoyo_hooks, ARRAY_SIZE(tomoyo_hooks), "tomoyo");
+	security_add_hooks(tomoyo_hooks, ARRAY_SIZE(tomoyo_hooks),
+			   &tomoyo_lsmid);
 	pr_info("TOMOYO Linux initialized\n");
 	s->domain_info = &tomoyo_kernel_domain;
 	atomic_inc(&tomoyo_kernel_domain.users);
security/yama/yama_lsm.c +5 -1
index 06e226166aab..ed6d45e62e0d 100644
@@ -421,6 +421,10 @@ static int yama_ptrace_traceme(struct task_struct *parent)
 	return rc;
 }
 
+static struct lsm_id yama_lsmid __lsm_ro_after_init = {
+	.lsm      = "yama",
+};
+
 static struct security_hook_list yama_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(ptrace_access_check, yama_ptrace_access_check),
 	LSM_HOOK_INIT(ptrace_traceme, yama_ptrace_traceme),
@@ -477,7 +481,7 @@ static inline void yama_init_sysctl(void) { }
 static int __init yama_init(void)
 {
 	pr_info("Yama: becoming mindful.\n");
-	security_add_hooks(yama_hooks, ARRAY_SIZE(yama_hooks), "yama");
+	security_add_hooks(yama_hooks, ARRAY_SIZE(yama_hooks), &yama_lsmid);
 	yama_init_sysctl();
 	return 0;
 }
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
maintainer
#3 lore raw

Re: [PATCH v38 01/39] LSM: Identify modules by more than name

Please Cc me for the next versions.

Quoted 9 lines · Casey Schaufler

Create a struct lsm_id to contain identifying information about Linux Security Modules (LSMs). At inception this contains a single member, which is the name of the module. Change the security_add_hooks() interface to use this structure. Change the individual modules to maintain their own struct lsm_id and pass it to security_add_hooks().

---

[...]

security/landlock/setup.c struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = { · line 27

Quoted 10 lines
security/landlock/setup.c +2 -0
index f8e8e980454c..fc7b69c5839e 100644
@@ -23,6 +23,10 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
  	.lbs_superblock = sizeof(struct landlock_superblock_security),
  };
 
+struct lsm_id landlock_lsmid __lsm_ro_after_init = {
+	.lsm      = LANDLOCK_NAME,

Please only use one space after ".lsm". This applies for other commits as well.

This command will do the trick:
FILTER_BRANCH_SQUELCH_WARNING=1 git filter-branch --tree-filter "clang-format-14 -i security/landlock/*.[ch]" v6.0-rc7..

maintainer
#4 lore raw

Re: [PATCH v38 01/39] LSM: Identify modules by more than name

In reply to Casey Schaufler

Hi!

Quoted 96 lines · Casey Schaufler

Create a struct lsm_id to contain identifying information about Linux Security Modules (LSMs). At inception this contains a single member, which is the name of the module. Change the security_add_hooks() interface to use this structure. Change the individual modules to maintain their own struct lsm_id and pass it to security_add_hooks().

---
 include/linux/lsm_hooks.h    | 11 +++++++++--
 security/apparmor/lsm.c      |  6 +++++-
 security/bpf/hooks.c         | 11 ++++++++++-
 security/commoncap.c         |  6 +++++-
 security/landlock/cred.c     |  2 +-
 security/landlock/fs.c       |  2 +-
 security/landlock/ptrace.c   |  2 +-
 security/landlock/setup.c    |  4 ++++
 security/landlock/setup.h    |  1 +
 security/loadpin/loadpin.c   |  7 ++++++-
 security/lockdown/lockdown.c |  6 +++++-
 security/safesetid/lsm.c     |  7 ++++++-
 security/security.c          | 12 ++++++------
 security/selinux/hooks.c     |  7 ++++++-
 security/smack/smack_lsm.c   |  6 +++++-
 security/tomoyo/tomoyo.c     |  7 ++++++-
 security/yama/yama_lsm.c     |  6 +++++-

 17 files changed, 82 insertions(+), 21 deletions(-)
include/linux/lsm_hooks.h +0 -0
index 3aa6030302f5..23054881eb08 100644
@@ -1598,6 +1598,13 @@ struct security_hook_heads {
  	#undef LSM_HOOK
  } __randomize_layout;

include/linux/lsm_hooks.h +7 -0
+/*
+ * Information that identifies a security module.
+ */
+struct lsm_id {
+	const char	*lsm;		/* Name of the LSM */
+};
+

 /*
  * Security module hook list structure.
  * For use with generic list macros for common operations.

include/linux/lsm_hooks.h +1 -1
@@ -1606,7 +1613,7 @@ struct security_hook_list {
  	struct hlist_node		list;
  	struct hlist_head		*head;
  	union security_list_options	hook;
-	const char			*lsm;
+	struct lsm_id			*lsmid;
  } __randomize_layout;


 /*

include/linux/lsm_hooks.h +0 -0
@@ -1641,7 +1648,7 @@ extern struct security_hook_heads security_hook_heads;
  extern char *lsm_names;


 extern void security_add_hooks(struct security_hook_list *hooks, int count,

include/linux/lsm_hooks.h +1 -1
-				const char *lsm);
+			       struct lsm_id *lsmid);


 #define LSM_FLAG_LEGACY_MAJOR BIT(0)
 #define LSM_FLAG_EXCLUSIVE BIT(1)

security/apparmor/lsm.c +0 -0
index e29cade7b662..b71f7d4159d7 100644
@@ -1202,6 +1202,10 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
  	.lbs_task = sizeof(struct aa_task_ctx),
  };

security/apparmor/lsm.c +4 -0
+static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
+	.lsm      = "apparmor",
+};
+

 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = { LSM_HOOK_INIT(ptrace_access_check, apparmor_ptrace_access_check), LSM_HOOK_INIT(ptrace_traceme, apparmor_ptrace_traceme),

security/apparmor/lsm.c +1 -1
@@ -1897,7 +1901,7 @@ static int __init apparmor_init(void)
  		goto buffers_out;
  	}
  	security_add_hooks(apparmor_hooks, ARRAY_SIZE(apparmor_hooks),
-				"apparmor");
+				&apparmor_lsmid);


  /* Report that AppArmor successfully initialized */ apparmor_initialized = 1;

security/bpf/hooks.c +0 -0
index e5971fa74fd7..e50de3abfde2 100644
@@ -15,9 +15,18 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
  	LSM_HOOK_INIT(task_free, bpf_task_storage_free),
  };

security/bpf/hooks.c static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = { · line 24

Quoted 7 lines
security/bpf/hooks.c +7 -0
+/*
+ * slot has to be LSMBLOB_NEEDED because some of the hooks
+ * supplied by this module require a slot.
+ */
+struct lsm_id bpf_lsmid __lsm_ro_after_init = {
+	.lsm      = "bpf",
+};

Can bpf_lsmid be static too?

Quoted 9 lines

+
 static int __init bpf_lsm_init(void)
 {

security/bpf/hooks.c +2 -1
-	security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks), "bpf");
+	security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks),
+			   &bpf_lsmid);

  pr_info("LSM support for eBPF active\n");
  return 0;
 }

Thanks

author maintainer
#5 lore raw

Re: [PATCH v38 01/39] LSM: Identify modules by more than name

Quoted 99 lines · Georgia Garcia

Hi!

Quoted 96 lines · Casey Schaufler

Create a struct lsm_id to contain identifying information about Linux Security Modules (LSMs). At inception this contains a single member, which is the name of the module. Change the security_add_hooks() interface to use this structure. Change the individual modules to maintain their own struct lsm_id and pass it to security_add_hooks().

---
 include/linux/lsm_hooks.h    | 11 +++++++++--
 security/apparmor/lsm.c      |  6 +++++-
 security/bpf/hooks.c         | 11 ++++++++++-
 security/commoncap.c         |  6 +++++-
 security/landlock/cred.c     |  2 +-
 security/landlock/fs.c       |  2 +-
 security/landlock/ptrace.c   |  2 +-
 security/landlock/setup.c    |  4 ++++
 security/landlock/setup.h    |  1 +
 security/loadpin/loadpin.c   |  7 ++++++-
 security/lockdown/lockdown.c |  6 +++++-
 security/safesetid/lsm.c     |  7 ++++++-
 security/security.c          | 12 ++++++------
 security/selinux/hooks.c     |  7 ++++++-
 security/smack/smack_lsm.c   |  6 +++++-
 security/tomoyo/tomoyo.c     |  7 ++++++-
 security/yama/yama_lsm.c     |  6 +++++-

 17 files changed, 82 insertions(+), 21 deletions(-)
include/linux/lsm_hooks.h +0 -0
index 3aa6030302f5..23054881eb08 100644
@@ -1598,6 +1598,13 @@ struct security_hook_heads {
  	#undef LSM_HOOK
  } __randomize_layout;

include/linux/lsm_hooks.h +7 -0
+/*
+ * Information that identifies a security module.
+ */
+struct lsm_id {
+	const char	*lsm;		/* Name of the LSM */
+};
+

 /*
  * Security module hook list structure.
  * For use with generic list macros for common operations.

include/linux/lsm_hooks.h +1 -1
@@ -1606,7 +1613,7 @@ struct security_hook_list {
  	struct hlist_node		list;
  	struct hlist_head		*head;
  	union security_list_options	hook;
-	const char			*lsm;
+	struct lsm_id			*lsmid;
  } __randomize_layout;


 /*

include/linux/lsm_hooks.h +0 -0
@@ -1641,7 +1648,7 @@ extern struct security_hook_heads security_hook_heads;
  extern char *lsm_names;


 extern void security_add_hooks(struct security_hook_list *hooks, int count,

include/linux/lsm_hooks.h +1 -1
-				const char *lsm);
+			       struct lsm_id *lsmid);


 #define LSM_FLAG_LEGACY_MAJOR BIT(0)
 #define LSM_FLAG_EXCLUSIVE BIT(1)

security/apparmor/lsm.c +0 -0
index e29cade7b662..b71f7d4159d7 100644
@@ -1202,6 +1202,10 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
  	.lbs_task = sizeof(struct aa_task_ctx),
  };

security/apparmor/lsm.c +4 -0
+static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
+	.lsm      = "apparmor",
+};
+

 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = { LSM_HOOK_INIT(ptrace_access_check, apparmor_ptrace_access_check), LSM_HOOK_INIT(ptrace_traceme, apparmor_ptrace_traceme),

security/apparmor/lsm.c +1 -1
@@ -1897,7 +1901,7 @@ static int __init apparmor_init(void)
  		goto buffers_out;
  	}
  	security_add_hooks(apparmor_hooks, ARRAY_SIZE(apparmor_hooks),
-				"apparmor");
+				&apparmor_lsmid);


  /* Report that AppArmor successfully initialized */ apparmor_initialized = 1;

security/bpf/hooks.c +0 -0
index e5971fa74fd7..e50de3abfde2 100644
@@ -15,9 +15,18 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
  	LSM_HOOK_INIT(task_free, bpf_task_storage_free),
  };

Quoted 8 lines

security/bpf/hooks.c static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = { · line 24

Quoted 7 lines
security/bpf/hooks.c +7 -0
+/*
+ * slot has to be LSMBLOB_NEEDED because some of the hooks
+ * supplied by this module require a slot.
+ */
+struct lsm_id bpf_lsmid __lsm_ro_after_init = {
+	.lsm      = "bpf",
+};

Can bpf_lsmid be static too?

Yes. Thank you for the review.

Quoted 11 lines
Quoted 10 lines

+
 static int __init bpf_lsm_init(void)
 {

security/bpf/hooks.c +2 -1
-	security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks), "bpf");
+	security_add_hooks(bpf_lsm_hooks, ARRAY_SIZE(bpf_lsm_hooks),
+			   &bpf_lsmid);

  pr_info("LSM support for eBPF active\n");
  return 0;
 }

Thanks

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit

author maintainer
#6 lore raw

PATCH v38 2/39 LSM: Add an LSM identifier for external use

In reply to Casey Schaufler

Add an integer member "id" to the struct lsm_id. This value is a unique identifier associated with each security module. The values are defined in a new UAPI header file. Each existing LSM has been updated to include it's LSMID in the lsm_id.

---
 include/linux/lsm_hooks.h    |  1 +
 include/uapi/linux/lsm.h     | 32 ++++++++++++++++++++++++++++++++
 security/apparmor/lsm.c      |  2 ++
 security/bpf/hooks.c         |  2 ++
 security/commoncap.c         |  2 ++
 security/landlock/setup.c    |  2 ++
 security/loadpin/loadpin.c   |  2 ++
 security/lockdown/lockdown.c |  4 +++-
 security/safesetid/lsm.c     |  2 ++
 security/selinux/hooks.c     |  2 ++
 security/smack/smack_lsm.c   |  2 ++
 security/tomoyo/tomoyo.c     |  2 ++
 security/yama/yama_lsm.c     |  2 ++
 13 files changed, 56 insertions(+), 1 deletion(-)
 create mode 100644 include/uapi/linux/lsm.h
include/linux/lsm_hooks.h +1 -0
index 23054881eb08..407f57aaa6ef 100644
@@ -1603,6 +1603,7 @@ struct security_hook_heads {
  */
 struct lsm_id {
 	const char	*lsm;		/* Name of the LSM */
+	int		id;		/* LSM ID */
 };
 
 /*
include/uapi/linux/lsm.h new file +32 -0
new file mode 100644
index 000000000000..5647c3e220c0
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Linus Security Modules (LSM) - User space API
+ *
+ * Copyright (C) 2022 Casey Schaufler <[email protected]>
+ * Copyright (C) Intel Corporation
+ */
+
+#ifndef _UAPI_LINUX_LSM_H
+#define _UAPI_LINUX_LSM_H
+
+/*
+ * ID values to identify security modules.
+ * A system may use more than one security module.
+ *
+ * LSM_ID_XXX values 32 and below are reserved for future use
+ */
+#define LSM_ID_INVALID		-1
+#define LSM_ID_SELINUX		33
+#define LSM_ID_SMACK		34
+#define LSM_ID_TOMOYO		35
+#define LSM_ID_IMA		36
+#define LSM_ID_APPARMOR		37
+#define LSM_ID_YAMA		38
+#define LSM_ID_LOADPIN		39
+#define LSM_ID_SAFESETID	40
+#define LSM_ID_LOCKDOWN		41
+#define LSM_ID_BPF		42
+#define LSM_ID_LANDLOCK		43
+#define LSM_ID_CAPABILITY	44
+
+#endif /* _UAPI_LINUX_LSM_H */
security/apparmor/lsm.c +2 -0
index b71f7d4159d7..fb6c7edd5393 100644
@@ -24,6 +24,7 @@
 #include <linux/zlib.h>
 #include <net/sock.h>
 #include <uapi/linux/mount.h>
+#include <uapi/linux/lsm.h>
 
 #include "include/apparmor.h"
 #include "include/apparmorfs.h"
@@ -1204,6 +1205,7 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
 
 static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
 	.lsm      = "apparmor",
+	.id       = LSM_ID_APPARMOR,
 };
 
 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
security/bpf/hooks.c +2 -0
index e50de3abfde2..c462fc41dd57 100644
@@ -5,6 +5,7 @@
  */
 #include <linux/lsm_hooks.h>
 #include <linux/bpf_lsm.h>
+#include <uapi/linux/lsm.h>
 
 static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
 	#define LSM_HOOK(RET, DEFAULT, NAME, ...) \
@@ -21,6 +22,7 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
  */
 struct lsm_id bpf_lsmid __lsm_ro_after_init = {
 	.lsm      = "bpf",
+	.id       = LSM_ID_BPF,
 };
 
 static int __init bpf_lsm_init(void)
security/commoncap.c +2 -0
index dab1b5f5e6aa..4e9b140159d8 100644
@@ -25,6 +25,7 @@
 #include <linux/binfmts.h>
 #include <linux/personality.h>
 #include <linux/mnt_idmapping.h>
+#include <uapi/linux/lsm.h>
 
 /*
  * If a non-root user executes a setuid-root binary in
@@ -1448,6 +1449,7 @@ int cap_mmap_file(struct file *file, unsigned long reqprot,
 
 static struct lsm_id capability_lsmid __lsm_ro_after_init = {
 	.lsm      = "capability",
+	.id       = LSM_ID_CAPABILITY,
 };
 
 static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
security/landlock/setup.c +2 -0
index fc7b69c5839e..1242c61c9de4 100644
@@ -8,6 +8,7 @@
 
 #include <linux/init.h>
 #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 
 #include "common.h"
 #include "cred.h"
@@ -25,6 +26,7 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
 
 struct lsm_id landlock_lsmid __lsm_ro_after_init = {
 	.lsm      = LANDLOCK_NAME,
+	.id       = LSM_ID_LANDLOCK,
 };
 
 static int __init landlock_init(void)
security/loadpin/loadpin.c +2 -0
index 7e5c897ccbb2..276c8a7cd6fe 100644
@@ -20,6 +20,7 @@
 #include <linux/string_helpers.h>
 #include <linux/dm-verity-loadpin.h>
 #include <uapi/linux/loadpin.h>
+#include <uapi/linux/lsm.h>
 
 static void report_load(const char *origin, struct file *file, char *operation)
 {
@@ -197,6 +198,7 @@ static int loadpin_load_data(enum kernel_load_data_id id, bool contents)
 
 static struct lsm_id loadpin_lsmid __lsm_ro_after_init = {
 	.lsm      = "loadpin",
+	.id       = LSM_ID_LOADPIN,
 };
 
 static struct security_hook_list loadpin_hooks[] __lsm_ro_after_init = {
security/lockdown/lockdown.c +3 -1
index 2af4bff8d101..3d3347f3dbd1 100644
@@ -13,6 +13,7 @@
 #include <linux/security.h>
 #include <linux/export.h>
 #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 
 static enum lockdown_reason kernel_locked_down;
 
@@ -76,7 +77,8 @@ static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
 };
 
 static struct lsm_id lockdown_lsmid __lsm_ro_after_init = {
-	.lsm     = "lockdown",
+	.lsm      = "lockdown",
+	.id       = LSM_ID_LOCKDOWN,
 };
 
 static int __init lockdown_lsm_init(void)
security/safesetid/lsm.c +2 -0
index 3a94103f3c5b..88002731e603 100644
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/sched/task_stack.h>
 #include <linux/security.h>
+#include <uapi/linux/lsm.h>
 #include "lsm.h"
 
 /* Flag indicating whether initialization completed */
@@ -263,6 +264,7 @@ static int safesetid_task_fix_setgroups(struct cred *new, const struct cred *old
 
 static struct lsm_id safesetid_lsmid __lsm_ro_after_init = {
 	.lsm      = "safesetid",
+	.id       = LSM_ID_SAFESETID,
 };
 
 static struct security_hook_list safesetid_security_hooks[] = {
security/selinux/hooks.c +2 -0
index 5e4938f3ce11..9803bbbc6747 100644
@@ -92,6 +92,7 @@
 #include <linux/fsnotify.h>
 #include <linux/fanotify.h>
 #include <linux/io_uring.h>
+#include <uapi/linux/lsm.h>
 
 #include "avc.h"
 #include "objsec.h"
@@ -7014,6 +7015,7 @@ static int selinux_uring_cmd(struct io_uring_cmd *ioucmd)
 
 static struct lsm_id selinux_lsmid __lsm_ro_after_init = {
 	.lsm      = "selinux",
+	.id       = LSM_ID_SELINUX,
 };
 
 /*
security/smack/smack_lsm.c +2 -0
index 5d8bc13feb09..2a88b4e7669e 100644
@@ -43,6 +43,7 @@
 #include <linux/fs_parser.h>
 #include <linux/watch_queue.h>
 #include <linux/io_uring.h>
+#include <uapi/linux/lsm.h>
 #include "smack.h"
 
 #define TRANS_TRUE	"TRUE"
@@ -4776,6 +4777,7 @@ struct lsm_blob_sizes smack_blob_sizes __lsm_ro_after_init = {
 
 static struct lsm_id smack_lsmid __lsm_ro_after_init = {
 	.lsm      = "smack",
+	.id       = LSM_ID_SMACK,
 };
 
 static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
security/tomoyo/tomoyo.c +2 -0
index 38342c1fa4bc..71eab206ba6e 100644
@@ -6,6 +6,7 @@
  */
 
 #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 #include "common.h"
 
 /**
@@ -532,6 +533,7 @@ static void tomoyo_task_free(struct task_struct *task)
 
 static struct lsm_id tomoyo_lsmid __lsm_ro_after_init = {
 	.lsm      = "tomoyo",
+	.id       = LSM_ID_TOMOYO,
 };
 
 /*
security/yama/yama_lsm.c +2 -0
index ed6d45e62e0d..b178d74bb00b 100644
@@ -18,6 +18,7 @@
 #include <linux/task_work.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/lsm.h>
 
 #define YAMA_SCOPE_DISABLED	0
 #define YAMA_SCOPE_RELATIONAL	1
@@ -423,6 +424,7 @@ static int yama_ptrace_traceme(struct task_struct *parent)
 
 static struct lsm_id yama_lsmid __lsm_ro_after_init = {
 	.lsm      = "yama",
+	.id       = LSM_ID_YAMA,
 };
 
 static struct security_hook_list yama_hooks[] __lsm_ro_after_init = {
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
maintainer
#7 lore raw

Re: [PATCH v38 02/39] LSM: Add an LSM identifier for external use

Quoted 47 lines · Casey Schaufler

Add an integer member "id" to the struct lsm_id. This value is a unique identifier associated with each security module. The values are defined in a new UAPI header file. Each existing LSM has been updated to include it's LSMID in the lsm_id.

---
  include/linux/lsm_hooks.h    |  1 +
  include/uapi/linux/lsm.h     | 32 ++++++++++++++++++++++++++++++++
  security/apparmor/lsm.c      |  2 ++
  security/bpf/hooks.c         |  2 ++
  security/commoncap.c         |  2 ++
  security/landlock/setup.c    |  2 ++
  security/loadpin/loadpin.c   |  2 ++
  security/lockdown/lockdown.c |  4 +++-
  security/safesetid/lsm.c     |  2 ++
  security/selinux/hooks.c     |  2 ++
  security/smack/smack_lsm.c   |  2 ++
  security/tomoyo/tomoyo.c     |  2 ++
  security/yama/yama_lsm.c     |  2 ++
  13 files changed, 56 insertions(+), 1 deletion(-)

create mode 100644 include/uapi/linux/lsm.h

include/linux/lsm_hooks.h +1 -0
index 23054881eb08..407f57aaa6ef 100644
@@ -1603,6 +1603,7 @@ struct security_hook_heads {
   */
  struct lsm_id {
  	const char	*lsm;		/* Name of the LSM */
+	int		id;		/* LSM ID */
  };
 
  /*
include/uapi/linux/lsm.h new file +6 -0
new file mode 100644
index 000000000000..5647c3e220c0
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Linus Security Modules (LSM) - User space API
+ *
+ * Copyright (C) 2022 Casey Schaufler <[email protected]>
+ * Copyright (C) Intel Corporation

include/uapi/linux/lsm.h line 16

Quoted 10 lines
include/uapi/linux/lsm.h new file +10 -0
+ */
+
+#ifndef _UAPI_LINUX_LSM_H
+#define _UAPI_LINUX_LSM_H
+
+/*
+ * ID values to identify security modules.
+ * A system may use more than one security module.
+ *
+ * LSM_ID_XXX values 32 and below are reserved for future use

What do you have in mind? Why not "reserve" higher bits instead and start with SELinux at 1?

Quoted 4 lines
include/uapi/linux/lsm.h new file +4 -0
+ */
+#define LSM_ID_INVALID		-1
+#define LSM_ID_SELINUX		33
+#define LSM_ID_SMACK		34

include/uapi/linux/lsm.h line 30

Quoted 10 lines
include/uapi/linux/lsm.h new file +10 -0
+#define LSM_ID_TOMOYO		35
+#define LSM_ID_IMA		36
+#define LSM_ID_APPARMOR		37
+#define LSM_ID_YAMA		38
+#define LSM_ID_LOADPIN		39
+#define LSM_ID_SAFESETID	40
+#define LSM_ID_LOCKDOWN		41
+#define LSM_ID_BPF		42
+#define LSM_ID_LANDLOCK		43
+#define LSM_ID_CAPABILITY	44

Out of curiosity, why this order?

Quoted 75 lines
include/uapi/linux/lsm.h new file +2 -0
+
+#endif /* _UAPI_LINUX_LSM_H */
security/apparmor/lsm.c +2 -0
index b71f7d4159d7..fb6c7edd5393 100644
@@ -24,6 +24,7 @@
  #include <linux/zlib.h>
  #include <net/sock.h>
  #include <uapi/linux/mount.h>
+#include <uapi/linux/lsm.h>
 
  #include "include/apparmor.h"
  #include "include/apparmorfs.h"
@@ -1204,6 +1205,7 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
 
  static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
  	.lsm      = "apparmor",
+	.id       = LSM_ID_APPARMOR,
  };
 
  static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
security/bpf/hooks.c +2 -0
index e50de3abfde2..c462fc41dd57 100644
@@ -5,6 +5,7 @@
   */
  #include <linux/lsm_hooks.h>
  #include <linux/bpf_lsm.h>
+#include <uapi/linux/lsm.h>
 
  static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
  	#define LSM_HOOK(RET, DEFAULT, NAME, ...) \
@@ -21,6 +22,7 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
   */
  struct lsm_id bpf_lsmid __lsm_ro_after_init = {
  	.lsm      = "bpf",
+	.id       = LSM_ID_BPF,
  };
 
  static int __init bpf_lsm_init(void)
security/commoncap.c +2 -0
index dab1b5f5e6aa..4e9b140159d8 100644
@@ -25,6 +25,7 @@
  #include <linux/binfmts.h>
  #include <linux/personality.h>
  #include <linux/mnt_idmapping.h>
+#include <uapi/linux/lsm.h>
 
  /*
   * If a non-root user executes a setuid-root binary in
@@ -1448,6 +1449,7 @@ int cap_mmap_file(struct file *file, unsigned long reqprot,
 
  static struct lsm_id capability_lsmid __lsm_ro_after_init = {
  	.lsm      = "capability",
+	.id       = LSM_ID_CAPABILITY,
  };
 
  static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
security/landlock/setup.c +1 -0
index fc7b69c5839e..1242c61c9de4 100644
@@ -8,6 +8,7 @@
 
  #include <linux/init.h>
  #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 
  #include "common.h"
  #include "cred.h"

security/landlock/setup.c struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = { · line 29

Quoted 4 lines
security/landlock/setup.c +1 -0
@@ -25,6 +26,7 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
 
  struct lsm_id landlock_lsmid __lsm_ro_after_init = {
  	.lsm      = LANDLOCK_NAME,
+	.id       = LSM_ID_LANDLOCK,

Please only use one space after ".id"

author maintainer
#8 lore raw

Re: [PATCH v38 02/39] LSM: Add an LSM identifier for external use

Quoted 53 lines · Mickaël Salaün
Quoted 51 lines · Casey Schaufler

Add an integer member "id" to the struct lsm_id. This value is a unique identifier associated with each security module. The values are defined in a new UAPI header file. Each existing LSM has been updated to include it's LSMID in the lsm_id.

---
  include/linux/lsm_hooks.h    |  1 + include/uapi/linux/lsm.h     | 32 ++++++++++++++++++++++++++++++++ security/apparmor/lsm.c      |  2 ++ security/bpf/hooks.c         |  2 ++ security/commoncap.c         |  2 ++ security/landlock/setup.c    |  2 ++ security/loadpin/loadpin.c   |  2 ++ security/lockdown/lockdown.c |  4 +++- security/safesetid/lsm.c     |  2 ++ security/selinux/hooks.c     |  2 ++ security/smack/smack_lsm.c   |  2 ++ security/tomoyo/tomoyo.c     |  2 ++ security/yama/yama_lsm.c     |  2 ++

  13 files changed, 56 insertions(+), 1 deletion(-)

  create mode 100644 include/uapi/linux/lsm.h

include/linux/lsm_hooks.h +0 -0
index 23054881eb08..407f57aaa6ef 100644
@@ -1603,6 +1603,7 @@ struct security_hook_heads {
    */
   struct lsm_id {

      const char    *lsm;        /* Name of the LSM */ +    int        id;        /* LSM ID */
  };
    /*

include/uapi/linux/lsm.h new file +11 -0
new file mode 100644
index 000000000000..5647c3e220c0
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Linus Security Modules (LSM) - User space API
+ *
+ * Copyright (C) 2022 Casey Schaufler <[email protected]>
+ * Copyright (C) Intel Corporation
+ */
+
+#ifndef _UAPI_LINUX_LSM_H
+#define _UAPI_LINUX_LSM_H
+
Quoted 8 lines

include/uapi/linux/lsm.h line 16

Quoted 5 lines
include/uapi/linux/lsm.h new file +5 -0
+/*
+ * ID values to identify security modules.
+ * A system may use more than one security module.
+ *
+ * LSM_ID_XXX values 32 and below are reserved for future use

What do you have in mind? Why not "reserve" higher bits instead and start with SELinux at 1?

I don't know what (if anything) Paul had in mind when he suggested the reserved values. It's not like there's a shortage of numbers, and as it's part of the ABI and can't change I'll err on the side of caution.

Quoted 18 lines
Quoted 6 lines
include/uapi/linux/lsm.h new file +4 -0
+ */
+#define LSM_ID_INVALID        -1
+#define LSM_ID_SELINUX        33
+#define LSM_ID_SMACK        34

include/uapi/linux/lsm.h line 30

Quoted 10 lines
include/uapi/linux/lsm.h new file +10 -0
+#define LSM_ID_TOMOYO        35
+#define LSM_ID_IMA        36
+#define LSM_ID_APPARMOR        37
+#define LSM_ID_YAMA        38
+#define LSM_ID_LOADPIN        39
+#define LSM_ID_SAFESETID    40
+#define LSM_ID_LOCKDOWN        41
+#define LSM_ID_BPF        42
+#define LSM_ID_LANDLOCK        43
+#define LSM_ID_CAPABILITY    44

Out of curiosity, why this order?

Order of inclusion upstream. Except for capability. In the next version I plan to fix the order by putting LSM_ID_CAPABILITY first at 32 and changing the comment. If we wanted something less mundane we could hex encode the first 4 letters of the name, but except for hacker style debugging that doesn't gain anything.

Quoted 71 lines
Quoted 71 lines
include/uapi/linux/lsm.h new file +2 -0
+
+#endif /* _UAPI_LINUX_LSM_H */
security/apparmor/lsm.c +2 -0
index b71f7d4159d7..fb6c7edd5393 100644
@@ -24,6 +24,7 @@
   #include <linux/zlib.h>
   #include <net/sock.h>
   #include <uapi/linux/mount.h>
+#include <uapi/linux/lsm.h>
     #include "include/apparmor.h"
   #include "include/apparmorfs.h"
@@ -1204,6 +1205,7 @@ struct lsm_blob_sizes apparmor_blob_sizes
 __lsm_ro_after_init = {
     static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
       .lsm      = "apparmor",
+    .id       = LSM_ID_APPARMOR,
   };

    static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {

security/bpf/hooks.c +1 -0
index e50de3abfde2..c462fc41dd57 100644
@@ -5,6 +5,7 @@
    */
   #include <linux/lsm_hooks.h>
   #include <linux/bpf_lsm.h>
+#include <uapi/linux/lsm.h>

    static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
      #define LSM_HOOK(RET, DEFAULT, NAME, ...) \

security/bpf/hooks.c +1 -0
@@ -21,6 +22,7 @@ static struct security_hook_list bpf_lsm_hooks[]
 __lsm_ro_after_init = {
    */
   struct lsm_id bpf_lsmid __lsm_ro_after_init = {
       .lsm      = "bpf",
+    .id       = LSM_ID_BPF,
   };
     static int __init bpf_lsm_init(void)
security/commoncap.c +2 -0
index dab1b5f5e6aa..4e9b140159d8 100644
@@ -25,6 +25,7 @@
   #include <linux/binfmts.h>
   #include <linux/personality.h>
   #include <linux/mnt_idmapping.h>
+#include <uapi/linux/lsm.h>
     /*
    * If a non-root user executes a setuid-root binary in
@@ -1448,6 +1449,7 @@ int cap_mmap_file(struct file *file, unsigned
 long reqprot,
     static struct lsm_id capability_lsmid __lsm_ro_after_init = {
       .lsm      = "capability",
+    .id       = LSM_ID_CAPABILITY,
   };

    static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {

security/landlock/setup.c +1 -0
index fc7b69c5839e..1242c61c9de4 100644
@@ -8,6 +8,7 @@
     #include <linux/init.h>
   #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
     #include "common.h"
Quoted 8 lines

security/landlock/setup.c struct lsm_blob_sizes landlock_blob_sizes · line 29

Quoted 6 lines
security/landlock/setup.c +1 -0
   #include "cred.h"
@@ -25,6 +26,7 @@ struct lsm_blob_sizes landlock_blob_sizes
 __lsm_ro_after_init = {
     struct lsm_id landlock_lsmid __lsm_ro_after_init = {
       .lsm      = LANDLOCK_NAME,
+    .id       = LSM_ID_LANDLOCK,

Please only use one space after ".id"

Yeah, I got that from the comments on 01/39. I will make that change throughout the set.

maintainer Reviewed-by on v38 2/39
#9 lore raw

Re: [PATCH v38 02/39] LSM: Add an LSM identifier for external use

In reply to Casey Schaufler
Quoted 6 lines · Casey Schaufler

Add an integer member "id" to the struct lsm_id. This value is a unique identifier associated with each security module. The values are defined in a new UAPI header file. Each existing LSM has been updated to include it's LSMID in the lsm_id.

Quoted 289 lines
---
 include/linux/lsm_hooks.h    |  1 +
 include/uapi/linux/lsm.h     | 32 ++++++++++++++++++++++++++++++++
 security/apparmor/lsm.c      |  2 ++
 security/bpf/hooks.c         |  2 ++
 security/commoncap.c         |  2 ++
 security/landlock/setup.c    |  2 ++
 security/loadpin/loadpin.c   |  2 ++
 security/lockdown/lockdown.c |  4 +++-
 security/safesetid/lsm.c     |  2 ++
 security/selinux/hooks.c     |  2 ++
 security/smack/smack_lsm.c   |  2 ++
 security/tomoyo/tomoyo.c     |  2 ++
 security/yama/yama_lsm.c     |  2 ++
 13 files changed, 56 insertions(+), 1 deletion(-)
 create mode 100644 include/uapi/linux/lsm.h
include/linux/lsm_hooks.h +1 -0
index 23054881eb08..407f57aaa6ef 100644
@@ -1603,6 +1603,7 @@ struct security_hook_heads {
  */
 struct lsm_id {
 	const char	*lsm;		/* Name of the LSM */
+	int		id;		/* LSM ID */
 };
 
 /*
include/uapi/linux/lsm.h new file +32 -0
new file mode 100644
index 000000000000..5647c3e220c0
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Linus Security Modules (LSM) - User space API
+ *
+ * Copyright (C) 2022 Casey Schaufler <[email protected]>
+ * Copyright (C) Intel Corporation
+ */
+
+#ifndef _UAPI_LINUX_LSM_H
+#define _UAPI_LINUX_LSM_H
+
+/*
+ * ID values to identify security modules.
+ * A system may use more than one security module.
+ *
+ * LSM_ID_XXX values 32 and below are reserved for future use
+ */
+#define LSM_ID_INVALID		-1
+#define LSM_ID_SELINUX		33
+#define LSM_ID_SMACK		34
+#define LSM_ID_TOMOYO		35
+#define LSM_ID_IMA		36
+#define LSM_ID_APPARMOR		37
+#define LSM_ID_YAMA		38
+#define LSM_ID_LOADPIN		39
+#define LSM_ID_SAFESETID	40
+#define LSM_ID_LOCKDOWN		41
+#define LSM_ID_BPF		42
+#define LSM_ID_LANDLOCK		43
+#define LSM_ID_CAPABILITY	44
+
+#endif /* _UAPI_LINUX_LSM_H */
security/apparmor/lsm.c +2 -0
index b71f7d4159d7..fb6c7edd5393 100644
@@ -24,6 +24,7 @@
 #include <linux/zlib.h>
 #include <net/sock.h>
 #include <uapi/linux/mount.h>
+#include <uapi/linux/lsm.h>
 
 #include "include/apparmor.h"
 #include "include/apparmorfs.h"
@@ -1204,6 +1205,7 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
 
 static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
 	.lsm      = "apparmor",
+	.id       = LSM_ID_APPARMOR,
 };
 
 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
security/bpf/hooks.c +2 -0
index e50de3abfde2..c462fc41dd57 100644
@@ -5,6 +5,7 @@
  */
 #include <linux/lsm_hooks.h>
 #include <linux/bpf_lsm.h>
+#include <uapi/linux/lsm.h>
 
 static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
 	#define LSM_HOOK(RET, DEFAULT, NAME, ...) \
@@ -21,6 +22,7 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
  */
 struct lsm_id bpf_lsmid __lsm_ro_after_init = {
 	.lsm      = "bpf",
+	.id       = LSM_ID_BPF,
 };
 
 static int __init bpf_lsm_init(void)
security/commoncap.c +2 -0
index dab1b5f5e6aa..4e9b140159d8 100644
@@ -25,6 +25,7 @@
 #include <linux/binfmts.h>
 #include <linux/personality.h>
 #include <linux/mnt_idmapping.h>
+#include <uapi/linux/lsm.h>
 
 /*
  * If a non-root user executes a setuid-root binary in
@@ -1448,6 +1449,7 @@ int cap_mmap_file(struct file *file, unsigned long reqprot,
 
 static struct lsm_id capability_lsmid __lsm_ro_after_init = {
 	.lsm      = "capability",
+	.id       = LSM_ID_CAPABILITY,
 };
 
 static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
security/landlock/setup.c +2 -0
index fc7b69c5839e..1242c61c9de4 100644
@@ -8,6 +8,7 @@
 
 #include <linux/init.h>
 #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 
 #include "common.h"
 #include "cred.h"
@@ -25,6 +26,7 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
 
 struct lsm_id landlock_lsmid __lsm_ro_after_init = {
 	.lsm      = LANDLOCK_NAME,
+	.id       = LSM_ID_LANDLOCK,
 };
 
 static int __init landlock_init(void)
security/loadpin/loadpin.c +2 -0
index 7e5c897ccbb2..276c8a7cd6fe 100644
@@ -20,6 +20,7 @@
 #include <linux/string_helpers.h>
 #include <linux/dm-verity-loadpin.h>
 #include <uapi/linux/loadpin.h>
+#include <uapi/linux/lsm.h>
 
 static void report_load(const char *origin, struct file *file, char *operation)
 {
@@ -197,6 +198,7 @@ static int loadpin_load_data(enum kernel_load_data_id id, bool contents)
 
 static struct lsm_id loadpin_lsmid __lsm_ro_after_init = {
 	.lsm      = "loadpin",
+	.id       = LSM_ID_LOADPIN,
 };
 
 static struct security_hook_list loadpin_hooks[] __lsm_ro_after_init = {
security/lockdown/lockdown.c +3 -1
index 2af4bff8d101..3d3347f3dbd1 100644
@@ -13,6 +13,7 @@
 #include <linux/security.h>
 #include <linux/export.h>
 #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 
 static enum lockdown_reason kernel_locked_down;
 
@@ -76,7 +77,8 @@ static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
 };
 
 static struct lsm_id lockdown_lsmid __lsm_ro_after_init = {
-	.lsm     = "lockdown",
+	.lsm      = "lockdown",
+	.id       = LSM_ID_LOCKDOWN,
 };
 
 static int __init lockdown_lsm_init(void)
security/safesetid/lsm.c +2 -0
index 3a94103f3c5b..88002731e603 100644
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/sched/task_stack.h>
 #include <linux/security.h>
+#include <uapi/linux/lsm.h>
 #include "lsm.h"
 
 /* Flag indicating whether initialization completed */
@@ -263,6 +264,7 @@ static int safesetid_task_fix_setgroups(struct cred *new, const struct cred *old
 
 static struct lsm_id safesetid_lsmid __lsm_ro_after_init = {
 	.lsm      = "safesetid",
+	.id       = LSM_ID_SAFESETID,
 };
 
 static struct security_hook_list safesetid_security_hooks[] = {
security/selinux/hooks.c +2 -0
index 5e4938f3ce11..9803bbbc6747 100644
@@ -92,6 +92,7 @@
 #include <linux/fsnotify.h>
 #include <linux/fanotify.h>
 #include <linux/io_uring.h>
+#include <uapi/linux/lsm.h>
 
 #include "avc.h"
 #include "objsec.h"
@@ -7014,6 +7015,7 @@ static int selinux_uring_cmd(struct io_uring_cmd *ioucmd)
 
 static struct lsm_id selinux_lsmid __lsm_ro_after_init = {
 	.lsm      = "selinux",
+	.id       = LSM_ID_SELINUX,
 };
 
 /*
security/smack/smack_lsm.c +2 -0
index 5d8bc13feb09..2a88b4e7669e 100644
@@ -43,6 +43,7 @@
 #include <linux/fs_parser.h>
 #include <linux/watch_queue.h>
 #include <linux/io_uring.h>
+#include <uapi/linux/lsm.h>
 #include "smack.h"
 
 #define TRANS_TRUE	"TRUE"
@@ -4776,6 +4777,7 @@ struct lsm_blob_sizes smack_blob_sizes __lsm_ro_after_init = {
 
 static struct lsm_id smack_lsmid __lsm_ro_after_init = {
 	.lsm      = "smack",
+	.id       = LSM_ID_SMACK,
 };
 
 static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
security/tomoyo/tomoyo.c +2 -0
index 38342c1fa4bc..71eab206ba6e 100644
@@ -6,6 +6,7 @@
  */
 
 #include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
 #include "common.h"
 
 /**
@@ -532,6 +533,7 @@ static void tomoyo_task_free(struct task_struct *task)
 
 static struct lsm_id tomoyo_lsmid __lsm_ro_after_init = {
 	.lsm      = "tomoyo",
+	.id       = LSM_ID_TOMOYO,
 };
 
 /*
security/yama/yama_lsm.c +2 -0
index ed6d45e62e0d..b178d74bb00b 100644
@@ -18,6 +18,7 @@
 #include <linux/task_work.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/lsm.h>
 
 #define YAMA_SCOPE_DISABLED	0
 #define YAMA_SCOPE_RELATIONAL	1
@@ -423,6 +424,7 @@ static int yama_ptrace_traceme(struct task_struct *parent)
 
 static struct lsm_id yama_lsmid __lsm_ro_after_init = {
 	.lsm      = "yama",
+	.id       = LSM_ID_YAMA,
 };
 
 static struct security_hook_list yama_hooks[] __lsm_ro_after_init = {
author maintainer
#10 lore raw

PATCH v38 3/39 LSM: Identify the process attributes for each module

In reply to Casey Schaufler

Add an integer member "features" to the struct lsm_id which identifies the API related data associated with each security module. The initial set of features maps to information that has traditionaly been available in /proc/self/attr.

---
 include/linux/lsm_hooks.h  |  1 +
 include/uapi/linux/lsm.h   | 14 ++++++++++++++
 security/apparmor/lsm.c    |  1 +
 security/selinux/hooks.c   |  2 ++
 security/smack/smack_lsm.c |  1 +
 5 files changed, 19 insertions(+)
include/linux/lsm_hooks.h +1 -0
index 407f57aaa6ef..ded76db3f523 100644
@@ -1604,6 +1604,7 @@ struct security_hook_heads {
 struct lsm_id {
 	const char	*lsm;		/* Name of the LSM */
 	int		id;		/* LSM ID */
+	int		features;	/* Set of LSM features */
 };
 
 /*
include/uapi/linux/lsm.h +14 -0
index 5647c3e220c0..4bb692b84a28 100644
@@ -29,4 +29,18 @@
 #define LSM_ID_LANDLOCK		43
 #define LSM_ID_CAPABILITY	44
 
+/*
+ * LSM_ATTR_XXX values identify the /proc/.../attr entry that the
+ * context represents. Not all security modules provide all of these
+ * values. Some security modules provide none of them.
+ */
+/* clang-format off */
+#define LSM_ATTR_CURRENT	(1UL << 0)
+#define LSM_ATTR_EXEC		(1UL << 1)
+#define LSM_ATTR_FSCREATE	(1UL << 2)
+#define LSM_ATTR_KEYCREATE	(1UL << 3)
+#define LSM_ATTR_PREV		(1UL << 4)
+#define LSM_ATTR_SOCKCREATE	(1UL << 5)
+/* clang-format on */
+
 #endif /* _UAPI_LINUX_LSM_H */
security/apparmor/lsm.c +1 -0
index fb6c7edd5393..40266cc4866c 100644
@@ -1206,6 +1206,7 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
 static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
 	.lsm      = "apparmor",
 	.id       = LSM_ID_APPARMOR,
+	.features = LSM_ATTR_CURRENT | LSM_ATTR_PREV | LSM_ATTR_EXEC,
 };
 
 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
security/selinux/hooks.c +2 -0
index 9803bbbc6747..625cc791c440 100644
@@ -7016,6 +7016,8 @@ static int selinux_uring_cmd(struct io_uring_cmd *ioucmd)
 static struct lsm_id selinux_lsmid __lsm_ro_after_init = {
 	.lsm      = "selinux",
 	.id       = LSM_ID_SELINUX,
+	.features = LSM_ATTR_CURRENT | LSM_ATTR_EXEC | LSM_ATTR_FSCREATE |
+		    LSM_ATTR_KEYCREATE | LSM_ATTR_PREV | LSM_ATTR_SOCKCREATE,
 };
 
 /*
security/smack/smack_lsm.c +1 -0
index 2a88b4e7669e..e79640a6bfd7 100644
@@ -4778,6 +4778,7 @@ struct lsm_blob_sizes smack_blob_sizes __lsm_ro_after_init = {
 static struct lsm_id smack_lsmid __lsm_ro_after_init = {
 	.lsm      = "smack",
 	.id       = LSM_ID_SMACK,
+	.features = LSM_ATTR_CURRENT,
 };
 
 static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
Signature · 1 line
2.37.3
author maintainer
#11 lore raw

PATCH v38 4/39 LSM: Maintain a table of LSM attribute data

In reply to Casey Schaufler

As LSMs are registered add their lsm_id pointers to a table. This will be used later for attribute reporting.

---
 include/linux/security.h | 17 +++++++++++++++++
 security/security.c      | 18 ++++++++++++++++++
 2 files changed, 35 insertions(+)
include/linux/security.h +17 -0
index 7bd0c490703d..abdd151fc720 100644
@@ -136,6 +136,23 @@ enum lockdown_reason {
 
 extern const char *const lockdown_reasons[LOCKDOWN_CONFIDENTIALITY_MAX+1];
 
+#define LSMID_ENTRIES ( \
+	1 + /* capabilities */ \
+	(IS_ENABLED(CONFIG_SECURITY_SELINUX) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_SMACK) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_TOMOYO) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_IMA) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_APPARMOR) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_YAMA) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_LOADPIN) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_SAFESETID) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_LOCKDOWN) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_BPF_LSM) ? 1 : 0) + \
+	(IS_ENABLED(CONFIG_SECURITY_LANDLOCK) ? 1 : 0))
+
+extern int lsm_id;
+extern struct lsm_id *lsm_idlist[];
+
 /* These functions are in security/commoncap.c */
 extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
 		       int cap, unsigned int opts);
security/security.c +18 -0
index ff7fda4ffa43..14f22d9c9d84 100644
@@ -28,6 +28,7 @@
 #include <linux/backing-dev.h>
 #include <linux/string.h>
 #include <linux/msg.h>
+#include <uapi/linux/lsm.h>
 #include <net/flow.h>
 
 #define MAX_LSM_EVM_XATTR	2
@@ -318,6 +319,12 @@ static void __init lsm_early_task(struct task_struct *task);
 
 static int lsm_append(const char *new, char **result);
 
+/*
+ * Current index to use while initializing the lsm id list.
+ */
+int lsm_id __lsm_ro_after_init;
+struct lsm_id *lsm_idlist[LSMID_ENTRIES] __lsm_ro_after_init;
+
 static void __init ordered_lsm_init(void)
 {
 	struct lsm_info **lsm;
@@ -362,6 +369,7 @@ static void __init ordered_lsm_init(void)
 	for (lsm = ordered_lsms; *lsm; lsm++)
 		initialize_lsm(*lsm);
 
+	init_debug("lsm count            = %d\n", lsm_id);
 	kfree(ordered_lsms);
 }
 
@@ -483,6 +491,16 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
 {
 	int i;
 
+	/*
+	 * A security module may call security_add_hooks() more
+	 * than once. Landlock is one such case.
+	 */
+	if (lsm_id == 0 || lsm_idlist[lsm_id - 1] != lsmid)
+		lsm_idlist[lsm_id++] = lsmid;
+
+	if (lsm_id > LSMID_ENTRIES)
+		panic("%s Too many LSMs registered.\n", __func__);
+
 	for (i = 0; i < count; i++) {
 		hooks[i].lsmid = lsmid;
 		hlist_add_tail_rcu(&hooks[i].list, hooks[i].head);
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
maintainer
#12 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

security/security.c void __init security_add_hooks(struct security_hook_list *hooks, int count, · line 502

Quoted 13 lines · Casey Schaufler
security/security.c +9 -0
@@ -483,6 +491,16 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
 {
 	int i;
 
+	/*
+	 * A security module may call security_add_hooks() more
+	 * than once. Landlock is one such case.
+	 */
+	if (lsm_id == 0 || lsm_idlist[lsm_id - 1] != lsmid)
+		lsm_idlist[lsm_id++] = lsmid;
+
+	if (lsm_id > LSMID_ENTRIES)
+		panic("%s Too many LSMs registered.\n", __func__);

I'm not happy with LSMID_ENTRIES. This is a way towards forever forbidding LKM-based LSMs.

I'm fine with using UAPI-visible constants for switching /proc/ files. But TOMOYO does not need such constant because TOMOYO does not use /proc/ files.

Also, lsm_self_attr() will be limited for LSM modules which use /proc/ files, and therefore I think prctl() will be already there.

Quoted 4 lines
security/security.c +1 -0
+
 	for (i = 0; i < count; i++) {
 		hooks[i].lsmid = lsmid;
 		hlist_add_tail_rcu(&hooks[i].list, hooks[i].head);
author maintainer
#13 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

Quoted 5 lines · Tetsuo Handa
Quoted 4 lines · Casey Schaufler
(quoted diff) +0 -0
@@ -483,6 +491,16 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
 {
 	int i;
 
Quoted 10 lines

security/security.c void __init security_add_hooks(struct security_hook_list *hooks, int count, · line 502

Quoted 9 lines
security/security.c +9 -0
+	/*
+	 * A security module may call security_add_hooks() more
+	 * than once. Landlock is one such case.
+	 */
+	if (lsm_id == 0 || lsm_idlist[lsm_id - 1] != lsmid)
+		lsm_idlist[lsm_id++] = lsmid;
+
+	if (lsm_id > LSMID_ENTRIES)
+		panic("%s Too many LSMs registered.\n", __func__);

I'm not happy with LSMID_ENTRIES. This is a way towards forever forbidding LKM-based LSMs.

I don't see any way given the locking issues that we're ever going to mix built in security modules and loaded security modules on the same hook lists. The SELinux module deletion code is sufficiently scary that it is being removed. That does not mean that I think loadable modules are impossible, I think it means that their management is going to have to be separate, the same way the BPF programs are handled. The only way that I see a unified hook list is for all the LSMs to be implemented as loadable modules, and I can't see that happening in my lifetime.

I can see an LSM like BPF, as I mentioned before, that manages loaded modules. Over the years I've seen several designs that might work. I'm encouraged (and not a little bit frightened) by the success of the BPF work.

Converting the array[LSMID_ENTRIES] implementation to a hlist like the hooks have used would not be that big a project and I don't see that making such a change would be a show-stopper for implementing loadable modules. I think that a lot of other issues would be more significant.

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

Quoted 5 lines

I'm fine with using UAPI-visible constants for switching /proc/ files. But TOMOYO does not need such constant because TOMOYO does not use /proc/ files.

Also, lsm_self_attr() will be limited for LSM modules which use /proc/ files, and therefore I think prctl() will be already there.

While the proposed set of attributes map to those in /proc/.../attr there is no reason to assume they will be limited to those. I can see providing several of the Smack attributes currently manipulated in smackfs, such as relabel-self. If we are providing SELinux specific values like keycreate there's no reason we can't provide Smack or TOMOYO specific values as well.

Quoted 5 lines
Quoted 5 lines
security/security.c +1 -0
+
 	for (i = 0; i < count; i++) {
 		hooks[i].lsmid = lsmid;
 		hlist_add_tail_rcu(&hooks[i].list, hooks[i].head);
maintainer
#14 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

Quoted 17 lines · Casey Schaufler
Quoted 5 lines · Tetsuo Handa
Quoted 4 lines · Casey Schaufler
(quoted diff) +0 -0
@@ -483,6 +491,16 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
 {
 	int i;
 
Quoted 10 lines

security/security.c void __init security_add_hooks(struct security_hook_list *hooks, int count, · line 502

Quoted 9 lines
security/security.c +9 -0
+	/*
+	 * A security module may call security_add_hooks() more
+	 * than once. Landlock is one such case.
+	 */
+	if (lsm_id == 0 || lsm_idlist[lsm_id - 1] != lsmid)
+		lsm_idlist[lsm_id++] = lsmid;
+
+	if (lsm_id > LSMID_ENTRIES)
+		panic("%s Too many LSMs registered.\n", __func__);

I'm not happy with LSMID_ENTRIES. This is a way towards forever forbidding LKM-based LSMs.

Quoted 8 lines

I don't see any way given the locking issues that we're ever going to mix built in security modules and loaded security modules on the same hook lists. The SELinux module deletion code is sufficiently scary that it is being removed. That does not mean that I think loadable modules are impossible, I think it means that their management is going to have to be separate, the same way the BPF programs are handled. The only way that I see a unified hook list is for all the LSMs to be implemented as loadable modules, and I can't see that happening in my lifetime.

I'm not expecting for unloadable LSM modules.
I'm expecting for loadable LSM modules.

I'm not expecting to make all LSM modules to be implemented as loadable LSM modules, for some want to associate "security label" to everything (including processes which might start before the global init process starts) but others do not need to associate "security label" to everything.

Quoted 5 lines

I can see an LSM like BPF, as I mentioned before, that manages loaded modules. Over the years I've seen several designs that might work. I'm encouraged (and not a little bit frightened) by the success of the BPF work.

There can be LSM modules whose lifetime of hooks match the lifetime of a process which registered hooks for that process. In that case, being automatically unregistered upon process termination would be preferable.

But there are LSM modules whose lifetime of hooks is irrelevant to a process which registered a hook for that process. In that case, we need a method for allowing registered hooks to remain even after that process terminated.

Please don't think loadable LSM modules as something that require special handling. TOMOYO is an LSM module whose lifetime of hooks is irrelevant to a process which registered a hook for that process, but does not need to associate "security label" to everything. It has to be trivial to convert TOMOYO as a loadable LSM module.

Quoted 5 lines

Converting the array[LSMID_ENTRIES] implementation to a hlist like the hooks have used would not be that big a project and I don't see that making such a change would be a show-stopper for implementing loadable modules. I think that a lot of other issues would be more significant.

Defining constants for each LSM module (i.e. "LSM: Add an LSM identifier for external use") is the show-stopper for implementing loadable modules. We won't be able to accept whatever LSM modules to upstream, and we won't be able to enable whatever LSM modules in distributor kernels.

LSM modules which cannot define a constant due to either "not accepted to upstream" or "not enabled by distributor kernels" will be forbidden. I expect that we assign a constant upon module registration (instead of API visible constants) if we require all LSM modules to have a constant.

Quoted 4 lines

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

This code is exactly for locking out loadable modules.

maintainer
#15 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

Quoted 7 lines · Tetsuo Handa
Quoted 3 lines · Casey Schaufler

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

This code is exactly for locking out loadable modules.

Imagine a situation where two individuals independently develop their own web applications using the same identifier, and then their web applications started working together with other web applications using that identifier. When they published their web applications for public and wider use, a problem that both web applications are already using the same identifier arises. It is too late to reassign the identifier.

The same trouble can happen with loadable LSM modules. Unless the upstream kernel behaves as if a DNS registerer that assigns a unique domainname for whatever web sites (regardless of whether a web site is for public or not), defining a permanent constant for LSM module is a way towards locking out loadable LSM modules. And it is well possible that a loadable LSM module wants to run on older kernels which do not have LSM id defined yet.

This "define LSM id as userspace visible constant" is more dangerous than just reserving some space for future use. You are trying to control all IP addresses for the sake of only in-tree LSM modules. No, no, no, please don't do that...

author maintainer
#16 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

Quoted 21 lines · Tetsuo Handa
Quoted 6 lines · Tetsuo Handa
Quoted 3 lines · Casey Schaufler

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

This code is exactly for locking out loadable modules.

Imagine a situation where two individuals independently develop their own web applications using the same identifier, and then their web applications started working together with other web applications using that identifier. When they published their web applications for public and wider use, a problem that both web applications are already using the same identifier arises. It is too late to reassign the identifier.

The same trouble can happen with loadable LSM modules. Unless the upstream kernel behaves as if a DNS registerer that assigns a unique domainname for whatever web sites (regardless of whether a web site is for public or not), defining a permanent constant for LSM module is a way towards locking out loadable LSM modules. And it is well possible that a loadable LSM module wants to run on older kernels which do not have LSM id defined yet.

Quoted 3 lines

This "define LSM id as userspace visible constant" is more dangerous than just reserving some space for future use. You are trying to control all IP addresses for the sake of only in-tree LSM modules. No, no, no, please don't do that...

It's really no more dangerous than using the LSM name. What if two developers implement modules and both name it "belllapadula"? User space won't be able to tell the difference if they base behavior on the module name. That's one thing that a loadable module mechanism is going to need to address that a built-in mechanism doesn't.

author maintainer
#17 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

In reply to Tetsuo Handa
Quoted 45 lines · Tetsuo Handa
Quoted 16 lines · Casey Schaufler
Quoted 5 lines · Tetsuo Handa
Quoted 4 lines · Casey Schaufler
(quoted diff) +0 -0
@@ -483,6 +491,16 @@ void __init security_add_hooks(struct security_hook_list *hooks, int count,
 {
 	int i;
 
Quoted 10 lines

security/security.c void __init security_add_hooks(struct security_hook_list *hooks, int count, · line 502

Quoted 9 lines
security/security.c +9 -0
+	/*
+	 * A security module may call security_add_hooks() more
+	 * than once. Landlock is one such case.
+	 */
+	if (lsm_id == 0 || lsm_idlist[lsm_id - 1] != lsmid)
+		lsm_idlist[lsm_id++] = lsmid;
+
+	if (lsm_id > LSMID_ENTRIES)
+		panic("%s Too many LSMs registered.\n", __func__);

I'm not happy with LSMID_ENTRIES. This is a way towards forever forbidding LKM-based LSMs.

Quoted 8 lines

I don't see any way given the locking issues that we're ever going to mix built in security modules and loaded security modules on the same hook lists. The SELinux module deletion code is sufficiently scary that it is being removed. That does not mean that I think loadable modules are impossible, I think it means that their management is going to have to be separate, the same way the BPF programs are handled. The only way that I see a unified hook list is for all the LSMs to be implemented as loadable modules, and I can't see that happening in my lifetime.

I'm not expecting for unloadable LSM modules.
I'm expecting for loadable LSM modules.

I'm not expecting to make all LSM modules to be implemented as loadable LSM modules, for some want to associate "security label" to everything (including processes which might start before the global init process starts) but others do not need to associate "security label" to everything.

Quoted 4 lines

I can see an LSM like BPF, as I mentioned before, that manages loaded modules. Over the years I've seen several designs that might work. I'm encouraged (and not a little bit frightened) by the success of the BPF work.

There can be LSM modules whose lifetime of hooks match the lifetime of a process which registered hooks for that process. In that case, being automatically unregistered upon process termination would be preferable.

But there are LSM modules whose lifetime of hooks is irrelevant to a process which registered a hook for that process. In that case, we need a method for allowing registered hooks to remain even after that process terminated.

Quoted 5 lines

Please don't think loadable LSM modules as something that require special handling. TOMOYO is an LSM module whose lifetime of hooks is irrelevant to a process which registered a hook for that process, but does not need to associate "security label" to everything. It has to be trivial to convert TOMOYO as a loadable LSM module.

I don't see that having a built-in version of TOMOYO and a loadable version needs to be difficult. That's something that whoever creates the loadable security module scheme is going to have to address. It will depend on the details of the loadable module mechanism. I can't comment on how that will work because I don't see loadable modules hitting the top of my queue.

Quoted 7 lines
Quoted 5 lines

Converting the array[LSMID_ENTRIES] implementation to a hlist like the hooks have used would not be that big a project and I don't see that making such a change would be a show-stopper for implementing loadable modules. I think that a lot of other issues would be more significant.

Defining constants for each LSM module (i.e. "LSM: Add an LSM identifier for external use") is the show-stopper for implementing loadable modules.

One possible way for loadable modules to work would be to have a built-in module LSM_ID_MODLOADER which maintains its own list of module hooks. The values returned from lsm_self_attr() would identify the this LSM and the data value would have to identify the loaded module it refers to, perhaps as "TOMOYO=XYZ" or "datastate=foobar". A flag LSM_ATTR_LOADED would indicate that the attribute needed to be processed according to loadable module attribute rules, whatever they might be.

So no, it's not a show stopper. Not any more than u32 secids are a showstopper for process attributes it audit records. LSM IDs are inconvenient, and not my first choice, but I'm not going to let that get in the way of getting this code upstream.

Quoted 2 lines

We won't be able to accept whatever LSM modules to upstream, and we won't be able to enable whatever LSM modules in distributor kernels.

A built in module loader security module would address this issue. Getting such a module accepted upstream is not going to be trivial, but the BPF people seem to have managed it.

Quoted 4 lines

LSM modules which cannot define a constant due to either "not accepted to upstream" or "not enabled by distributor kernels" will be forbidden. I expect that we assign a constant upon module registration (instead of API visible constants) if we require all LSM modules to have a constant.

Maybe the thing to do is rewrite TOMOYO in eBPF. If I wanted to have a loadable security module I could either take ten years or so to get a loadable module scheme upstream in addition to my module, or I could write it in eBPF and use it the next day. I don't know enough about eBPF programming to say if it has everything TOMOYO needs, but it sure looks like an easier path if it does.

Quoted 4 lines
Quoted 3 lines

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

This code is exactly for locking out loadable modules.

I hope that I have suggested viable (if not convenient) alternatives. I suppose it is possible that locking out loadable modules is one motivation behind the LSM ID scheme, but I really doubt it. And more importantly, as I've outlined above, I can't be successful in locking out loadable security modules. I don't even see it as an additional complication.

maintainer
#18 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

Quoted 6 lines · Casey Schaufler
Quoted 2 lines

We won't be able to accept whatever LSM modules to upstream, and we won't be able to enable whatever LSM modules in distributor kernels.

A built in module loader security module would address this issue. Getting such a module accepted upstream is not going to be trivial, but the BPF people seem to have managed it.

How can we guarantee that a built-in module loader security module is always built-in ? What I'm insisting is that "warrant the freedom to load loadable LSM modules without recompiling the whole kernel".

Sure, we can load LSM modules which were not built into distributor kernels if we can recompile the whole kernel". But give me a break, that's a stupid opinion for non-kernel developers. People won't replace distributor kernels with rebuilt kernels only for enabling LSM modules which were not built into distributor kernels.

Quoting from https://lkml.kernel.org/r/[email protected]

Quoted 2 lines

I'm waiting to see what happens if eBPF security modules become popular. I can easily see distributions turning the BPF LSM off.

Even if TOMOYO could be rewritten in eBPF (I don't think it is possible), how TOMOYO can be loaded into distributor kernels if distributions turn the BPF LSM off ?

Quoted 2 lines

Before I go any further, I think that the loadable module manager LSM would be very hard to get upstream.

Not only it will be very hard to get the loadable module manager LSM upstream, it will be also very hard to keep the loadable module manager LSM enabled in distributor kernels.

Again, how can we guarantee that a built-in module loader security module is always built-in ?

What I'm insisting is that "warrant the freedom to load loadable LSM modules without recompiling the whole kernel".

Adding EXPORT_SYMBOL_GPL(security_hook_heads) is the only way that can "allow LSM modules which distributors cannot support to be legally loaded".

Any fixed-sized array like lsm_idlist[LSMID_ENTRIES] that defines max capacity based on whether that LSM module is built-in will lock out loadable LSM modules. Thus, I'm not happy with LSMID_ENTRIES.

Quoted 26 lines · Casey Schaufler
Quoted 21 lines · Tetsuo Handa
Quoted 6 lines · Tetsuo Handa
Quoted 3 lines · Casey Schaufler

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

This code is exactly for locking out loadable modules.

Imagine a situation where two individuals independently develop their own web applications using the same identifier, and then their web applications started working together with other web applications using that identifier. When they published their web applications for public and wider use, a problem that both web applications are already using the same identifier arises. It is too late to reassign the identifier.

The same trouble can happen with loadable LSM modules. Unless the upstream kernel behaves as if a DNS registerer that assigns a unique domainname for whatever web sites (regardless of whether a web site is for public or not), defining a permanent constant for LSM module is a way towards locking out loadable LSM modules. And it is well possible that a loadable LSM module wants to run on older kernels which do not have LSM id defined yet.

Quoted 3 lines

This "define LSM id as userspace visible constant" is more dangerous than just reserving some space for future use. You are trying to control all IP addresses for the sake of only in-tree LSM modules. No, no, no, please don't do that...

Quoted 5 lines

It's really no more dangerous than using the LSM name. What if two developers implement modules and both name it "belllapadula"? User space won't be able to tell the difference if they base behavior on the module name. That's one thing that a loadable module mechanism is going to need to address that a built-in mechanism doesn't.

If the upstream kernel assigns an LSM id for all LSM modules including out-of-tree and/or private LSM modules (that's why I described that the upstream kernel behaves as if a DNS registerer), we can assign LSM id = 100 to "belllapadula" from A and LSM id = 101 to "belllapadula" from B, and both "belllapadula" modules can work without conflicts by using LSM id. Of course, this implies that we need to preserve unused space in lsm_idlist[LSMID_ENTRIES] etc. for such LSM modules (if we use fixed-sized array rather than a linked list).

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit

author maintainer
#19 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

Quoted 8 lines · Tetsuo Handa
Quoted 5 lines · Casey Schaufler
Quoted 2 lines

We won't be able to accept whatever LSM modules to upstream, and we won't be able to enable whatever LSM modules in distributor kernels.

A built in module loader security module would address this issue. Getting such a module accepted upstream is not going to be trivial, but the BPF people seem to have managed it.

How can we guarantee that a built-in module loader security module is always built-in ?

You can't. That's up to the distribution. Just like BPF.

Quoted 2 lines

What I'm insisting is that "warrant the freedom to load
loadable LSM modules without recompiling the whole kernel".

Since security modules are optional and the LSM infrastructure itself is optional you can't ensure that any given kernel would support a loadable security module.

Quoted 14 lines

Sure, we can load LSM modules which were not built into distributor kernels if we can recompile the whole kernel". But give me a break, that's a stupid opinion for non-kernel developers. People won't replace distributor kernels with rebuilt kernels only for enabling LSM modules which were not built into distributor kernels.

Quoting from https://lkml.kernel.org/r/[email protected]

Quoted 2 lines

I'm waiting to see what happens if eBPF security modules become popular. I can easily see distributions turning the BPF LSM off.

Even if TOMOYO could be rewritten in eBPF (I don't think it is possible), how TOMOYO can be loaded into distributor kernels if distributions turn the BPF LSM off ?

Quoted 6 lines
Quoted 2 lines

Before I go any further, I think that the loadable module manager LSM would be very hard to get upstream.

Not only it will be very hard to get the loadable module manager LSM upstream, it will be also very hard to keep the loadable module manager LSM enabled in distributor kernels.

That is correct.

Quoted 3 lines

Again, how can we guarantee that a built-in module loader security module is always built-in ?

Again, you can't. You can't guarantee that the LSM infrastructure is built in.

Quoted 5 lines

What I'm insisting is that "warrant the freedom to load loadable LSM modules without recompiling the whole kernel".

Adding EXPORT_SYMBOL_GPL(security_hook_heads) is the only way that can "allow LSM modules which distributors cannot support to be legally loaded".

I believe that I've identified an alternative. It isn't easy or cheap.

Quoted 38 lines

Any fixed-sized array like lsm_idlist[LSMID_ENTRIES] that defines max capacity based on whether that LSM module is built-in will lock out loadable LSM modules. Thus, I'm not happy with LSMID_ENTRIES.

Quoted 22 lines · Casey Schaufler
Quoted 21 lines · Tetsuo Handa
Quoted 6 lines · Tetsuo Handa
Quoted 3 lines · Casey Schaufler

I will, on the other hand, listen to compelling arguments. It is not the intention of this code to lock out loadable modules. If I thought it would I would not have proposed it.

This code is exactly for locking out loadable modules.

Imagine a situation where two individuals independently develop their own web applications using the same identifier, and then their web applications started working together with other web applications using that identifier. When they published their web applications for public and wider use, a problem that both web applications are already using the same identifier arises. It is too late to reassign the identifier.

The same trouble can happen with loadable LSM modules. Unless the upstream kernel behaves as if a DNS registerer that assigns a unique domainname for whatever web sites (regardless of whether a web site is for public or not), defining a permanent constant for LSM module is a way towards locking out loadable LSM modules. And it is well possible that a loadable LSM module wants to run on older kernels which do not have LSM id defined yet.

Quoted 8 lines
Quoted 3 lines

This "define LSM id as userspace visible constant" is more dangerous than just reserving some space for future use. You are trying to control all IP addresses for the sake of only in-tree LSM modules. No, no, no, please don't do that...

It's really no more dangerous than using the LSM name. What if two developers implement modules and both name it "belllapadula"? User space won't be able to tell the difference if they base behavior on the module name. That's one thing that a loadable module mechanism is going to need to address that a built-in mechanism doesn't.

Quoted 7 lines

If the upstream kernel assigns an LSM id for all LSM modules including out-of-tree and/or private LSM modules (that's why I described that the upstream kernel behaves as if a DNS registerer), we can assign LSM id = 100 to "belllapadula" from A and LSM id = 101 to "belllapadula" from B, and both "belllapadula" modules can work without conflicts by using LSM id. Of course, this implies that we need to preserve unused space in lsm_idlist[LSMID_ENTRIES] etc. for such LSM modules (if we use fixed-sized array rather than a linked list).

Of course the upstream kernel isn't going to have LSM IDs for out-of-tree security modules. That's one of many reasons loadable modules are going to have to be treated differently from built-in modules, if they're allowed at all.

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit

maintainer Nacked-by NAK
#20 lore raw

Re: [PATCH v38 04/39] LSM: Maintain a table of LSM attribute data

(Oops. I chose a wrong mail. Replying to intended mail.)

Quoted 6 lines · Casey Schaufler
Quoted 2 lines

What I'm insisting is that "warrant the freedom to load
loadable LSM modules without recompiling the whole kernel".

Since security modules are optional and the LSM infrastructure itself is optional you can't ensure that any given kernel would support a loadable security module.

Like I propose adding EXPORT_SYMBOL_GPL(security_hook_heads), I'm not taking about distributors who choose CONFIG_SECURITY=n.

Quoted 4 lines
Quoted 2 lines

Adding EXPORT_SYMBOL_GPL(security_hook_heads) is the only way that can "allow LSM modules which distributors cannot support to be legally loaded".

I believe that I've identified an alternative. It isn't easy or cheap.

No. You are just handwaving/postponing the problem using something unknown that is not yet shown as a workable code. Anything that can be disabled via kernel config option cannot be an alternative.

Quoting from https://lkml.kernel.org/r/[email protected]

Quoted 9 lines

Like Paul Moore said

However, I will caution that it is becoming increasingly difficult for people to find time to review potential new LSMs so it may a while to attract sufficient comments and feedback.

, being unable to legally use loadable LSMs deprives of chances to develop/try new LSMs, and makes LSM interface more and more unattractive. The consequence would be "The LSM interface is dead. We will give up implementing as LSMs."

The biggest problem is that quite few developers show interest in loadable LSM modules. How many developers responded to this topic? Once the ability to allow loadable LSM modules is technically lost, nobody shall be able to revive it. You will be happy with ignoring poor people.

You are already and completely trapped into "only in-tree and supported by distributors is correct" crap.

Quoted 4 lines

Of course the upstream kernel isn't going to have LSM IDs for out-of-tree security modules. That's one of many reasons loadable modules are going to have to be treated differently from built-in modules, if they're allowed at all.

Then, I have to hate your idea of having fixed sized array.

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit

author maintainer
#21 lore raw

PATCH v38 5/39 proc: Use lsmids instead of lsm names for attrs

In reply to Casey Schaufler

Use the LSM ID number instead of the LSM name to identify which security module's attibute data should be shown in /proc/self/attr. The security_[gs]etprocattr() functions have been changed to expect the LSM ID. The change from a string comparison to an integer comparison in these functions will provide a minor performance improvement.

---
 fs/proc/base.c           | 29 +++++++++++++++--------------
 fs/proc/internal.h       |  2 +-
 include/linux/security.h | 11 +++++------
 security/security.c      | 11 +++++------
 4 files changed, 26 insertions(+), 27 deletions(-)
fs/proc/base.c +15 -14
index 93f7e3d971e4..b2bda7d0619f 100644
@@ -96,6 +96,7 @@
 #include <linux/time_namespace.h>
 #include <linux/resctrl.h>
 #include <linux/cn_proc.h>
+#include <uapi/linux/lsm.h>
 #include <trace/events/oom.h>
 #include "internal.h"
 #include "fd.h"
@@ -145,10 +146,10 @@ struct pid_entry {
 	NOD(NAME, (S_IFREG|(MODE)),			\
 		NULL, &proc_single_file_operations,	\
 		{ .proc_show = show } )
-#define ATTR(LSM, NAME, MODE)				\
+#define ATTR(LSMID, NAME, MODE)				\
 	NOD(NAME, (S_IFREG|(MODE)),			\
 		NULL, &proc_pid_attr_operations,	\
-		{ .lsm = LSM })
+		{ .lsmid = LSMID })
 
 /*
  * Count the number of hardlinks for the pid_entry table, excluding the .
@@ -2727,7 +2728,7 @@ static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
 	if (!task)
 		return -ESRCH;
 
-	length = security_getprocattr(task, PROC_I(inode)->op.lsm,
+	length = security_getprocattr(task, PROC_I(inode)->op.lsmid,
 				      (char*)file->f_path.dentry->d_name.name,
 				      &p);
 	put_task_struct(task);
@@ -2785,7 +2786,7 @@ static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf,
 	if (rv < 0)
 		goto out_free;
 
-	rv = security_setprocattr(PROC_I(inode)->op.lsm,
+	rv = security_setprocattr(PROC_I(inode)->op.lsmid,
 				  file->f_path.dentry->d_name.name, page,
 				  count);
 	mutex_unlock(&current->signal->cred_guard_mutex);
@@ -2834,27 +2835,27 @@ static const struct inode_operations proc_##LSM##_attr_dir_inode_ops = { \
 
 #ifdef CONFIG_SECURITY_SMACK
 static const struct pid_entry smack_attr_dir_stuff[] = {
-	ATTR("smack", "current",	0666),
+	ATTR(LSM_ID_SMACK, "current",	0666),
 };
 LSM_DIR_OPS(smack);
 #endif
 
 #ifdef CONFIG_SECURITY_APPARMOR
 static const struct pid_entry apparmor_attr_dir_stuff[] = {
-	ATTR("apparmor", "current",	0666),
-	ATTR("apparmor", "prev",	0444),
-	ATTR("apparmor", "exec",	0666),
+	ATTR(LSM_ID_APPARMOR, "current",	0666),
+	ATTR(LSM_ID_APPARMOR, "prev",		0444),
+	ATTR(LSM_ID_APPARMOR, "exec",		0666),
 };
 LSM_DIR_OPS(apparmor);
 #endif
 
 static const struct pid_entry attr_dir_stuff[] = {
-	ATTR(NULL, "current",		0666),
-	ATTR(NULL, "prev",		0444),
-	ATTR(NULL, "exec",		0666),
-	ATTR(NULL, "fscreate",		0666),
-	ATTR(NULL, "keycreate",		0666),
-	ATTR(NULL, "sockcreate",	0666),
+	ATTR(LSM_ID_INVALID, "current",		0666),
+	ATTR(LSM_ID_INVALID, "prev",		0444),
+	ATTR(LSM_ID_INVALID, "exec",		0666),
+	ATTR(LSM_ID_INVALID, "fscreate",	0666),
+	ATTR(LSM_ID_INVALID, "keycreate",	0666),
+	ATTR(LSM_ID_INVALID, "sockcreate",	0666),
 #ifdef CONFIG_SECURITY_SMACK
 	DIR("smack",			0555,
 	    proc_smack_attr_dir_inode_ops, proc_smack_attr_dir_ops),
fs/proc/internal.h +1 -1
index 06a80f78433d..3f6f4a7a1498 100644
@@ -87,7 +87,7 @@ union proc_op {
 	int (*proc_show)(struct seq_file *m,
 		struct pid_namespace *ns, struct pid *pid,
 		struct task_struct *task);
-	const char *lsm;
+	int lsmid;
 };
 
 struct proc_inode {
include/linux/security.h +5 -6
index abdd151fc720..c4696f14daac 100644
@@ -478,10 +478,9 @@ int security_sem_semctl(struct kern_ipc_perm *sma, int cmd);
 int security_sem_semop(struct kern_ipc_perm *sma, struct sembuf *sops,
 			unsigned nsops, int alter);
 void security_d_instantiate(struct dentry *dentry, struct inode *inode);
-int security_getprocattr(struct task_struct *p, const char *lsm, char *name,
+int security_getprocattr(struct task_struct *p, int lsmid, char *name,
 			 char **value);
-int security_setprocattr(const char *lsm, const char *name, void *value,
-			 size_t size);
+int security_setprocattr(int lsmid, const char *name, void *value, size_t size);
 int security_netlink_send(struct sock *sk, struct sk_buff *skb);
 int security_ismaclabel(const char *name);
 int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen);
@@ -1317,14 +1316,14 @@ static inline void security_d_instantiate(struct dentry *dentry,
 					  struct inode *inode)
 { }
 
-static inline int security_getprocattr(struct task_struct *p, const char *lsm,
+static inline int security_getprocattr(struct task_struct *p, int lsmid,
 				       char *name, char **value)
 {
 	return -EINVAL;
 }
 
-static inline int security_setprocattr(const char *lsm, char *name,
-				       void *value, size_t size)
+static inline int security_setprocattr(int lsmid, char *name, void *value,
+				       size_t size)
 {
 	return -EINVAL;
 }
security/security.c +5 -6
index 14f22d9c9d84..af62f4c1cc89 100644
@@ -2075,26 +2075,25 @@ void security_d_instantiate(struct dentry *dentry, struct inode *inode)
 }
 EXPORT_SYMBOL(security_d_instantiate);
 
-int security_getprocattr(struct task_struct *p, const char *lsm, char *name,
-				char **value)
+int security_getprocattr(struct task_struct *p, int lsmid, char *name,
+			 char **value)
 {
 	struct security_hook_list *hp;
 
 	hlist_for_each_entry(hp, &security_hook_heads.getprocattr, list) {
-		if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
+		if (lsmid != LSM_ID_INVALID && lsmid != hp->lsmid->id)
 			continue;
 		return hp->hook.getprocattr(p, name, value);
 	}
 	return LSM_RET_DEFAULT(getprocattr);
 }
 
-int security_setprocattr(const char *lsm, const char *name, void *value,
-			 size_t size)
+int security_setprocattr(int lsmid, const char *name, void *value, size_t size)
 {
 	struct security_hook_list *hp;
 
 	hlist_for_each_entry(hp, &security_hook_heads.setprocattr, list) {
-		if (lsm != NULL && strcmp(lsm, hp->lsmid->lsm))
+		if (lsmid != LSM_ID_INVALID && lsmid != hp->lsmid->id)
 			continue;
 		return hp->hook.setprocattr(name, value, size);
 	}
Signature · 1 line
2.37.3
author maintainer
#22 lore raw

PATCH v38 6/39 LSM: lsm_self_attr syscall for LSM self attributes

In reply to Casey Schaufler

Create a system call lsm_self_attr() to provide the security module maintained attributes of the current process. Historically these attributes have been exposed to user space via entries in procfs under /proc/self/attr.

Attributes are provided as a collection of lsm_ctx structures which are placed into a user supplied buffer. Each structure identifys the security module providing the attribute, which of the possible attributes is provided, the size of the attribute, and finally the attribute value. The format of the attribute value is defined by the security module, but will always be \0 terminated. The ctx_len value will be larger than strlen(ctx).

	------------------------------
	| unsigned int id            |
	------------------------------
	| unsigned int flags         |
	------------------------------
	| __kernel_size_t ctx_len    |
	------------------------------
	| unsigned char ctx[ctx_len] |
	------------------------------
	| unsigned int id            |
	------------------------------
	| unsigned int flags         |
	------------------------------
	| __kernel_size_t ctx_len    |
	------------------------------
	| unsigned char ctx[ctx_len] |
	------------------------------
---
 arch/x86/entry/syscalls/syscall_64.tbl |   1 +
 include/linux/syscalls.h               |   1 +
 include/uapi/asm-generic/unistd.h      |   5 +-
 include/uapi/linux/lsm.h               |  21 ++++
 kernel/sys_ni.c                        |   3 +
 security/Makefile                      |   1 +
 security/lsm_syscalls.c                | 156 +++++++++++++++++++++++++
 7 files changed, 187 insertions(+), 1 deletion(-)
 create mode 100644 security/lsm_syscalls.c
arch/x86/entry/syscalls/syscall_64.tbl +1 -0
index c84d12608cd2..56d5c5202fd0 100644
@@ -372,6 +372,7 @@
 448	common	process_mrelease	sys_process_mrelease
 449	common	futex_waitv		sys_futex_waitv
 450	common	set_mempolicy_home_node	sys_set_mempolicy_home_node
+451	common	lsm_self_attr		sys_lsm_self_attr
 
 #
 # Due to a historical design error, certain syscalls are numbered differently
include/linux/syscalls.h +1 -0
index a34b0f9a9972..7f87ef8be546 100644
@@ -1056,6 +1056,7 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
 asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
 					    unsigned long home_node,
 					    unsigned long flags);
+asmlinkage long sys_lsm_self_attr(struct lsm_ctx *ctx, size_t *size, int flags);
 
 /*
  * Architecture-specific system calls
include/uapi/asm-generic/unistd.h +4 -1
index 45fa180cc56a..aa66718e1b48 100644
@@ -886,8 +886,11 @@ __SYSCALL(__NR_futex_waitv, sys_futex_waitv)
 #define __NR_set_mempolicy_home_node 450
 __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
 
+#define __NR_lsm_self_attr 451
+__SYSCALL(__NR_lsm_self_attr, sys_lsm_self_attr)
+
 #undef __NR_syscalls
-#define __NR_syscalls 451
+#define __NR_syscalls 452
 
 /*
  * 32 bit systems traditionally used different
include/uapi/linux/lsm.h +21 -0
index 4bb692b84a28..5acd791f82a9 100644
@@ -9,6 +9,27 @@
 #ifndef _UAPI_LINUX_LSM_H
 #define _UAPI_LINUX_LSM_H
 
+#include <linux/types.h>
+#include <linux/unistd.h>
+
+/**
+ * struct lsm_ctx - LSM context
+ * @id: the LSM id number, see LSM_ID_XXX
+ * @flags: context specifier and LSM specific flags
+ * @ctx_len: the size of @ctx
+ * @ctx: the LSM context, a nul terminated string
+ *
+ * @ctx in a nul terminated string.
+ *	(strlen(@ctx) < @ctx_len) is always true.
+ *	(strlen(@ctx) == @ctx_len + 1) is not guaranteed.
+ */
+struct lsm_ctx {
+	unsigned int		id;
+	unsigned int		flags;
+	__kernel_size_t		ctx_len;
+	unsigned char		ctx[];
+};
+
 /*
  * ID values to identify security modules.
  * A system may use more than one security module.
kernel/sys_ni.c +3 -0
index 860b2dcf3ac4..0fdb0341251d 100644
@@ -262,6 +262,9 @@ COND_SYSCALL_COMPAT(recvmsg);
 /* mm/nommu.c, also with MMU */
 COND_SYSCALL(mremap);
 
+/* security/lsm_syscalls.c */
+COND_SYSCALL(lsm_self_attr);
+
 /* security/keys/keyctl.c */
 COND_SYSCALL(add_key);
 COND_SYSCALL(request_key);
security/Makefile +1 -0
index 18121f8f85cd..59f238490665 100644
@@ -7,6 +7,7 @@ obj-$(CONFIG_KEYS)			+= keys/
 
 # always enable default capabilities
 obj-y					+= commoncap.o
+obj-$(CONFIG_SECURITY) 			+= lsm_syscalls.o
 obj-$(CONFIG_MMU)			+= min_addr.o
 
 # Object file lists
security/lsm_syscalls.c new file +156 -0

156 lines not on this page · raw message

Signature · 1 line
2.37.3
#23 lore raw

Re: [PATCH v38 06/39] LSM: lsm_self_attr syscall for LSM self attributes

I love your patch! Perhaps something to improve:

Hi Casey,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v6.0-rc7]
[cannot apply to pcmoore-audit/next pcmoore-selinux/next zohar-integrity/next-integrity next-20220927] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Casey-Schaufler/LSM-Identify-modules-by-more-than-name/20220928-045406
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 46452d3786a82bd732ba73fb308ae5cbe4e1e591
config: m68k-allyesconfig
compiler: m68k-linux-gcc (GCC) 12.1.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/e614eb870ca4cc351e1847e79041960feb9604dc
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Casey-Schaufler/LSM-Identify-modules-by-more-than-name/20220928-045406 git checkout e614eb870ca4cc351e1847e79041960feb9604dc
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash kernel/sched/

If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>

All warnings (new ones prefixed by >>):

In file included from include/linux/syscalls_api.h:1,
from kernel/sched/core.c:13:

>> include/linux/syscalls.h:1059:42: warning: 'struct lsm_ctx' declared inside parameter list will not be visible outside of this definition or declaration
    1059 | asmlinkage long sys_lsm_self_attr(struct lsm_ctx *ctx, size_t *size, int flags);
         |                                          ^~~~~~~

--
In file included from include/linux/syscalls_api.h:1,
from kernel/sched/sched.h:61, from kernel/sched/fair.c:54:

>> include/linux/syscalls.h:1059:42: warning: 'struct lsm_ctx' declared inside parameter list will not be visible outside of this definition or declaration
    1059 | asmlinkage long sys_lsm_self_attr(struct lsm_ctx *ctx, size_t *size, int flags);
         |                                          ^~~~~~~

kernel/sched/fair.c:672:5: warning: no previous prototype for 'sched_update_scaling' [-Wmissing-prototypes]
672 | int sched_update_scaling(void)
| ^~~~~~~~~~~~~~~~~~~~

vim +1059 include/linux/syscalls.h

903
904 /* mm/, CONFIG_MMU only */
905 asmlinkage long sys_swapon(const char __user *specialfile, int swap_flags);
906 asmlinkage long sys_swapoff(const char __user *specialfile);
907 asmlinkage long sys_mprotect(unsigned long start, size_t len,
908 unsigned long prot);
909 asmlinkage long sys_msync(unsigned long start, size_t len, int flags);
910 asmlinkage long sys_mlock(unsigned long start, size_t len);
911 asmlinkage long sys_munlock(unsigned long start, size_t len);
912 asmlinkage long sys_mlockall(int flags);
913 asmlinkage long sys_munlockall(void);
914 asmlinkage long sys_mincore(unsigned long start, size_t len,
915 unsigned char __user * vec);
916 asmlinkage long sys_madvise(unsigned long start, size_t len, int behavior);
917 asmlinkage long sys_process_madvise(int pidfd, const struct iovec __user *vec,
918 size_t vlen, int behavior, unsigned int flags);
919 asmlinkage long sys_process_mrelease(int pidfd, unsigned int flags);
920 asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
921 unsigned long prot, unsigned long pgoff,
922 unsigned long flags);
923 asmlinkage long sys_mbind(unsigned long start, unsigned long len,
924 unsigned long mode,
925 const unsigned long __user *nmask,
926 unsigned long maxnode,
927 unsigned flags);
928 asmlinkage long sys_get_mempolicy(int __user *policy,
929 unsigned long __user *nmask,
930 unsigned long maxnode,
931 unsigned long addr, unsigned long flags);
932 asmlinkage long sys_set_mempolicy(int mode, const unsigned long __user *nmask,
933 unsigned long maxnode);
934 asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
935 const unsigned long __user *from,
936 const unsigned long __user *to);
937 asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
938 const void __user * __user *pages,
939 const int __user *nodes,
940 int __user *status,
941 int flags);
942
943 asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
944 siginfo_t __user *uinfo);
945 asmlinkage long sys_perf_event_open(
946 struct perf_event_attr __user *attr_uptr,
947 pid_t pid, int cpu, int group_fd, unsigned long flags);
948 asmlinkage long sys_accept4(int, struct sockaddr __user *, int __user *, int);
949 asmlinkage long sys_recvmmsg(int fd, struct mmsghdr __user *msg,
950 unsigned int vlen, unsigned flags,
951 struct __kernel_timespec __user *timeout);
952 asmlinkage long sys_recvmmsg_time32(int fd, struct mmsghdr __user *msg,
953 unsigned int vlen, unsigned flags,
954 struct old_timespec32 __user *timeout);
955
956 asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
957 int options, struct rusage __user *ru);
958 asmlinkage long sys_prlimit64(pid_t pid, unsigned int resource,
959 const struct rlimit64 __user *new_rlim,
960 struct rlimit64 __user *old_rlim);
961 asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags);
962 asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
963 u64 mask, int fd,
964 const char __user *pathname);
965 asmlinkage long sys_name_to_handle_at(int dfd, const char __user *name,
966 struct file_handle __user *handle,
967 int __user *mnt_id, int flag);
968 asmlinkage long sys_open_by_handle_at(int mountdirfd,
969 struct file_handle __user *handle,
970 int flags);
971 asmlinkage long sys_clock_adjtime(clockid_t which_clock,
972 struct __kernel_timex __user *tx);
973 asmlinkage long sys_clock_adjtime32(clockid_t which_clock,
974 struct old_timex32 __user *tx);
975 asmlinkage long sys_syncfs(int fd);
976 asmlinkage long sys_setns(int fd, int nstype);
977 asmlinkage long sys_pidfd_open(pid_t pid, unsigned int flags);
978 asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg,
979 unsigned int vlen, unsigned flags);
980 asmlinkage long sys_process_vm_readv(pid_t pid,

   981					     const struct iovec __user *lvec,
   982					     unsigned long liovcnt,
   983					     const struct iovec __user *rvec,
   984					     unsigned long riovcnt,
   985					     unsigned long flags);
   986	asmlinkage long sys_process_vm_writev(pid_t pid,
   987					      const struct iovec __user *lvec,
   988					      unsigned long liovcnt,
   989					      const struct iovec __user *rvec,
   990					      unsigned long riovcnt,
   991					      unsigned long flags);
   992	asmlinkage long sys_kcmp(pid_t pid1, pid_t pid2, int type,
   993				 unsigned long idx1, unsigned long idx2);
   994	asmlinkage long sys_finit_module(int fd, const char __user *uargs, int flags);
   995	asmlinkage long sys_sched_setattr(pid_t pid,
   996						struct sched_attr __user *attr,
   997						unsigned int flags);
   998	asmlinkage long sys_sched_getattr(pid_t pid,
   999						struct sched_attr __user *attr,
  1000						unsigned int size,
  1001						unsigned int flags);
  1002	asmlinkage long sys_renameat2(int olddfd, const char __user *oldname,
  1003				      int newdfd, const char __user *newname,
  1004				      unsigned int flags);
  1005	asmlinkage long sys_seccomp(unsigned int op, unsigned int flags,
  1006				    void __user *uargs);
  1007	asmlinkage long sys_getrandom(char __user *buf, size_t count,
  1008				      unsigned int flags);
  1009	asmlinkage long sys_memfd_create(const char __user *uname_ptr, unsigned int flags);
  1010	asmlinkage long sys_bpf(int cmd, union bpf_attr *attr, unsigned int size);
  1011	asmlinkage long sys_execveat(int dfd, const char __user *filename,
  1012				const char __user *const __user *argv,
  1013				const char __user *const __user *envp, int flags);
  1014	asmlinkage long sys_userfaultfd(int flags);
  1015	asmlinkage long sys_membarrier(int cmd, unsigned int flags, int cpu_id);
  1016	asmlinkage long sys_mlock2(unsigned long start, size_t len, int flags);
  1017	asmlinkage long sys_copy_file_range(int fd_in, loff_t __user *off_in,
  1018					    int fd_out, loff_t __user *off_out,
  1019					    size_t len, unsigned int flags);
  1020	asmlinkage long sys_preadv2(unsigned long fd, const struct iovec __user *vec,
  1021				    unsigned long vlen, unsigned long pos_l, unsigned long pos_h,
  1022				    rwf_t flags);
  1023	asmlinkage long sys_pwritev2(unsigned long fd, const struct iovec __user *vec,
  1024				    unsigned long vlen, unsigned long pos_l, unsigned long pos_h,
  1025				    rwf_t flags);
  1026	asmlinkage long sys_pkey_mprotect(unsigned long start, size_t len,
  1027					  unsigned long prot, int pkey);
  1028	asmlinkage long sys_pkey_alloc(unsigned long flags, unsigned long init_val);
  1029	asmlinkage long sys_pkey_free(int pkey);
  1030	asmlinkage long sys_statx(int dfd, const char __user *path, unsigned flags,
  1031				  unsigned mask, struct statx __user *buffer);
  1032	asmlinkage long sys_rseq(struct rseq __user *rseq, uint32_t rseq_len,
  1033				 int flags, uint32_t sig);
  1034	asmlinkage long sys_open_tree(int dfd, const char __user *path, unsigned flags);
  1035	asmlinkage long sys_move_mount(int from_dfd, const char __user *from_path,
  1036				       int to_dfd, const char __user *to_path,
  1037				       unsigned int ms_flags);
  1038	asmlinkage long sys_mount_setattr(int dfd, const char __user *path,
  1039					  unsigned int flags,
  1040					  struct mount_attr __user *uattr, size_t usize);
  1041	asmlinkage long sys_fsopen(const char __user *fs_name, unsigned int flags);
  1042	asmlinkage long sys_fsconfig(int fs_fd, unsigned int cmd, const char __user *key,
  1043				     const void __user *value, int aux);
  1044	asmlinkage long sys_fsmount(int fs_fd, unsigned int flags, unsigned int ms_flags);
  1045	asmlinkage long sys_fspick(int dfd, const char __user *path, unsigned int flags);
  1046	asmlinkage long sys_pidfd_send_signal(int pidfd, int sig,
  1047					       siginfo_t __user *info,
  1048					       unsigned int flags);
  1049	asmlinkage long sys_pidfd_getfd(int pidfd, int fd, unsigned int flags);
  1050	asmlinkage long sys_landlock_create_ruleset(const struct landlock_ruleset_attr __user *attr,
  1051			size_t size, __u32 flags);
  1052	asmlinkage long sys_landlock_add_rule(int ruleset_fd, enum landlock_rule_type rule_type,
  1053			const void __user *rule_attr, __u32 flags);
  1054	asmlinkage long sys_landlock_restrict_self(int ruleset_fd, __u32 flags);
  1055	asmlinkage long sys_memfd_secret(unsigned int flags);
  1056	asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
  1057						    unsigned long home_node,
  1058						    unsigned long flags);
> 1059	asmlinkage long sys_lsm_self_attr(struct lsm_ctx *ctx, size_t *size, int flags);

1060

Signature · 2 lines
0-DAY CI Kernel Test Service
https://01.org/lkp

#
# Automatically generated file; DO NOT EDIT. # Linux/m68k 6.0.0-rc7 Kernel Configuration #
CONFIG_CC_VERSION_TEXT="m68k-linux-gcc (GCC) 12.1.0" CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100 CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0 CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=123 CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_DEBUGFS=y

# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LEGACY_TIMER_TICK=y
CONFIG_TIME_KUNIT_TEST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y

# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y

# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y

# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y

#
# Scheduler features
#

# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y CONFIG_BOOT_CONFIG_EMBED_FILE="" CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#

# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y

# end of General setup

CONFIG_M68K=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_LOW_RES=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_HZ=100
CONFIG_PGTABLE_LEVELS=3
CONFIG_MMU=y
CONFIG_MMU_MOTOROLA=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y

#
# Platform setup
#

#
# Processor Type
#
CONFIG_M68KCLASSIC=y
# CONFIG_COLDFIRE is not set
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y

#
# Processor Specific Options
#
CONFIG_M68KFPU_EMU=y
CONFIG_M68KFPU_EMU_EXTRAPREC=y
CONFIG_M68KFPU_EMU_ONLY=y
CONFIG_ADVANCED=y
CONFIG_RMW_INSNS=y
CONFIG_SINGLE_MEMORY_CHUNK=y
CONFIG_060_WRITETHROUGH=y
CONFIG_M68K_L2_CACHE=y
CONFIG_CPU_HAS_ADDRESS_SPACES=y
CONFIG_FPU=y

#
# Machine Types
#
CONFIG_AMIGA=y
CONFIG_ATARI=y
CONFIG_ATARI_KBD_CORE=y
CONFIG_MAC=y
CONFIG_APOLLO=y
CONFIG_VME=y
CONFIG_MVME147=y
CONFIG_MVME16x=y
CONFIG_BVME6000=y
CONFIG_HP300=y
CONFIG_SUN3X=y
CONFIG_Q40=y
CONFIG_VIRT=y

#
# Bus Support
#
CONFIG_DIO=y
CONFIG_NUBUS=y
CONFIG_ZORRO=y
CONFIG_AMIGA_PCMCIA=y
CONFIG_ISA=y
CONFIG_ATARI_ROM_ISA=y
CONFIG_ZORRO_NAMES=y

# end of Platform setup

#
# Kernel Features
#

# end of Kernel Features

#
# Platform devices
#
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_NATFEAT=y
CONFIG_NFBLOCK=y
CONFIG_NFCON=y
CONFIG_NFETH=y
CONFIG_ATARI_ETHERNAT=y
CONFIG_ATARI_ETHERNEC=y

# end of Platform devices

#
# Character devices
#
CONFIG_ATARI_DSP56K=y
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_HPDCA=y
CONFIG_HPAPCI=y
CONFIG_SERIAL_CONSOLE=y

# end of Character devices

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_MMU_GATHER_NO_RANGE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_NO_PREEMPT=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_HAVE_ARCH_PFN_VALID=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y

# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y

# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y

# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BINFMT_FLAT_OLD=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y

# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_VADDR_KUNIT_TEST=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_DBGFS=y
CONFIG_DAMON_DBGFS_KUNIT_TEST=y
CONFIG_DAMON_RECLAIM=y
CONFIG_DAMON_LRU_SORT=y

# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
CONFIG_TCP_CONG_BBR=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_BBR is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_ESP_OFFLOAD=y
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TEST=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=y
CONFIG_NFT_CT=y
CONFIG_NFT_FLOW_OFFLOAD=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_FIB_INET=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NFT_FIB_NETDEV=y
CONFIG_NFT_REJECT_NETDEV=y
CONFIG_NF_FLOW_TABLE_INET=y
CONFIG_NF_FLOW_TABLE=y
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y

# end of Core Netfilter Configuration

CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
CONFIG_IP_VS_TWOS=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y

# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y

# end of DECnet: Netfilter Configuration

CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_CONNTRACK_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y

# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y

# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_AR9331=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_HELLCREEK=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_RTL4_A=y
CONFIG_NET_DSA_TAG_RTL8_4=y
CONFIG_NET_DSA_TAG_RZN1_A5PSW=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_XRS700X=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_COPS=y
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=y
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=y
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_CONNMARK=y
CONFIG_NET_ACT_CTINFO=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_CT=y
CONFIG_NET_ACT_GATE=y
CONFIG_NET_IFE_SKBMARK=y
CONFIG_NET_IFE_SKBPRIO=y
CONFIG_NET_IFE_SKBTCINDEX=y
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_OPENVSWITCH_GENEVE=y
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_HWBM=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y

# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y

# end of AX.25 network device drivers

CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
CONFIG_BT_QCOMSMD=y
CONFIG_BT_HCIRSI=y
CONFIG_BT_VIRTIO=y

# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_TEST=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_VIRTUAL_NCI=y
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_MRVL_SPI=y
CONFIG_NFC_ST21NFCA=y
CONFIG_NFC_ST21NFCA_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_ST_NCI_SPI=y
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
CONFIG_NFC_ST95HF=y

# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y

#
# Device Drivers
#
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y

#
# PC-card bridges
#
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_UPLOAD=y

# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_AC97=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y

# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BT1_APB=y
CONFIG_BT1_AXI=y
CONFIG_MOXTET=y
CONFIG_HISILICON_LPC=y
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_QCOM_EBI2=y
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_EP=y

# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol #
CONFIG_ARM_SCMI_PROTOCOL=y CONFIG_ARM_SCMI_HAVE_TRANSPORT=y CONFIG_ARM_SCMI_HAVE_SHMEM=y CONFIG_ARM_SCMI_HAVE_MSG=y CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE=y CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE=y CONFIG_ARM_SCMI_POWER_DOMAIN=y CONFIG_ARM_SCMI_POWER_CONTROL=y

# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_MTK_ADSP_IPC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_TURRIS_MOX_RWTM=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_TEE_BNXT_FW=y
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y
CONFIG_IMX_DSP=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y

#
# Tegra firmware driver
#

# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BCM63XX_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_OF_PARTS_BCM4908=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_IMAGETAG=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_SHARPSL_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_QCOMSMEM_PARTS=y

# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK. #
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_PSTORE=y
CONFIG_MTD_SWAP=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_BT1_ROM=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_PLATRAM=y

# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4

# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_SAMSUNG=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_AMS_DELTA=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_NAND_SLC_LPC32XX=y
CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_BRCMNAND_BCMA=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_NAND_SH_FLCTL=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_NAND_TXX9NDFMC=y
CONFIG_MTD_NAND_JZ4780=y
CONFIG_MTD_NAND_INGENIC_ECC=y
CONFIG_MTD_NAND_JZ4740_ECC=y
CONFIG_MTD_NAND_JZ4725B_BCH=y
CONFIG_MTD_NAND_JZ4780_BCH=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_TEGRA=y
CONFIG_MTD_NAND_STM32_FMC2=y
CONFIG_MTD_NAND_MESON=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
CONFIG_MTD_NAND_ARASAN=y
CONFIG_MTD_NAND_INTEL_LGM=y
CONFIG_MTD_NAND_RENESAS=y

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=y

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
CONFIG_MTD_NAND_ECC_MEDIATEK=y

# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y

# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_SPI_HISI_SFC=y
CONFIG_SPI_NXP_SPIFI=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=y
CONFIG_HBMC_AM654=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AMIGA=y
CONFIG_PARPORT_MFC3=y
CONFIG_PARPORT_ATARI=y
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_ATARI_FLOPPY=y
CONFIG_BLK_DEV_SWIM=y
CONFIG_AMIGA_Z2RAM=y
CONFIG_CDROM=y
CONFIG_PARIDE=y

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_BPCK6=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_UBLK=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=y
CONFIG_BLK_DEV_RNBD_SERVER=y

#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_RDMA=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_APPLE=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_RDMA=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y

# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_GEHC_ACHC=y
CONFIG_HI6421V600_IRQ=y
CONFIG_QCOM_COINCELL=y
CONFIG_QCOM_FASTRPC=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y

# end of EEPROM support

#
# Texas Instruments shared transport line discipline #
CONFIG_TI_ST=y

# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_SPI=y
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_ECHO=y
CONFIG_MISC_RTSX_USB=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y

# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_ESP_PIO=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y

# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_ISA=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_53C700_BE_BUS=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_DEBUG=y
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
CONFIG_SCSI_ZORRO_ESP=y
CONFIG_ATARI_SCSI=y
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
CONFIG_MVME147_SCSI=y
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y

# end of SCSI device support

CONFIG_HAVE_PATA_PLATFORM=y
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCM=y
CONFIG_AHCI_DA850=y
CONFIG_AHCI_DM816=y
CONFIG_AHCI_IMX=y
CONFIG_AHCI_CEVA=y
CONFIG_AHCI_MTK=y
CONFIG_AHCI_MVEBU=y
CONFIG_AHCI_SUNXI=y
CONFIG_AHCI_TEGRA=y
CONFIG_AHCI_XGENE=y
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_FSL=y
CONFIG_SATA_GEMINI=y
CONFIG_SATA_AHCI_SEATTLE=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_SATA_DWC=y
CONFIG_SATA_DWC_OLD_DMA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_RCAR=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_BK3710=y
CONFIG_PATA_FTIDE010=y
CONFIG_PATA_IMX=y
CONFIG_PATA_PXA=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_FALCON=y
CONFIG_PATA_GAYLE=y
CONFIG_PATA_BUDDHA=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_IXP4XX_CF=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_SAMSUNG_CF=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y CONFIG_BCACHE_CLOSURES_DEBUG=y CONFIG_BCACHE_ASYNC_REGISTRATION=y CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y CONFIG_DM_BIO_PRISON=y CONFIG_DM_PERSISTENT_DATA=y CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y CONFIG_DM_MULTIPATH_ST=y CONFIG_DM_MULTIPATH_HST=y CONFIG_DM_MULTIPATH_IOA=y
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_SBP_TARGET=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y

# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_IOP=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
CONFIG_WIREGUARD_DEBUG=y
CONFIG_EQUALIZER=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
CONFIG_BAREUDP=y
CONFIG_GTP=y
CONFIG_AMT=y
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_TAP=y
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_NET_VRF=y
CONFIG_VSOCKMON=y
CONFIG_MHI_NET=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_ISA=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=y
CONFIG_CAIF_VIRTIO=y

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=y
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_SEVILLE=y
CONFIG_NET_DSA_AR9331=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_SJA1105=y
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=y
CONFIG_NET_DSA_XRS700X_I2C=y
CONFIG_NET_DSA_XRS700X_MDIO=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_MDIO=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=y
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y

# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_NET_VENDOR_ACTIONS=y
CONFIG_OWL_EMAC=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_A2065=y
CONFIG_ARIADNE=y
CONFIG_ATARILANCE=y
CONFIG_HPLANCE=y
CONFIG_MVME147_NET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_SUN3LANCE=y
CONFIG_AMD_XGBE=y
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=y
CONFIG_NET_XGENE_V2=y
CONFIG_NET_VENDOR_APPLE=y
CONFIG_MACMACE=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=y
CONFIG_ARC_EMAC=y
CONFIG_EMAC_ROCKCHIP=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_BCM4908_ENET=y
CONFIG_BCMGENET=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
CONFIG_BGMAC_PLATFORM=y
CONFIG_SYSTEMPORT=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
CONFIG_EP93XX_ETH=y
CONFIG_MAC89x0=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9000=y
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
CONFIG_DM9051=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
CONFIG_TSNEP_SELFTESTS=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
CONFIG_FTMAC100=y
CONFIG_FTGMAC100=y
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA2_SWITCH=y
CONFIG_FSL_ENETC_IERB=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_HISI_FEMAC=y
CONFIG_HIP04_ETH=y
CONFIG_HI13X1_GMAC=y
CONFIG_HNS_MDIO=y
CONFIG_HNS=y
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_BVME6000_NET=y
CONFIG_MVME16x_NET=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_KORINA=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=y
CONFIG_MVMDIO=y
CONFIG_MVNETA_BM_ENABLE=y
CONFIG_MVNETA=y
CONFIG_MVNETA_BM=y
CONFIG_MVPP2=y
CONFIG_MVPP2_PTP=y
CONFIG_PXA168_ETH=y
CONFIG_PRESTERA=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC_WED=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_MEDIATEK_STAR_EMAC=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLXSW_CORE=y
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_I2C=y
CONFIG_MLXSW_MINIMAL=y
CONFIG_MLXFW=y
CONFIG_MLXBF_GIGE=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=y
CONFIG_LAN966X_SWITCH=y
CONFIG_SPARX5_SWITCH=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_MACSONIC=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_AX88796=y
CONFIG_AX88796_93CX6=y
CONFIG_XSURF100=y
CONFIG_HYDRA=y
CONFIG_MAC8390=y
CONFIG_NE2000=y
CONFIG_APNE=y
CONFIG_PCMCIA_PCNET=y
CONFIG_ULTRA=y
CONFIG_WD80x3=y
CONFIG_ZORRO8390=y
CONFIG_LPC_ENET=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_QCA7000_SPI=y
CONFIG_QCA7000_UART=y
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_SH_ETH=y
CONFIG_RAVB=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=y
CONFIG_SMC91X=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_SELFTESTS=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_ANARION=y
CONFIG_DWMAC_INGENIC=y
CONFIG_DWMAC_IPQ806X=y
CONFIG_DWMAC_LPC18XX=y
CONFIG_DWMAC_MEDIATEK=y
CONFIG_DWMAC_MESON=y
CONFIG_DWMAC_OXNAS=y
CONFIG_DWMAC_QCOM_ETHQOS=y
CONFIG_DWMAC_ROCKCHIP=y
CONFIG_DWMAC_SOCFPGA=y
CONFIG_DWMAC_STI=y
CONFIG_DWMAC_STM32=y
CONFIG_DWMAC_SUNXI=y
CONFIG_DWMAC_SUN8I=y
CONFIG_DWMAC_IMX8=y
CONFIG_DWMAC_INTEL_PLAT=y
CONFIG_DWMAC_VISCONTI=y
CONFIG_NET_VENDOR_SUNPLUS=y
CONFIG_SP7021_EMAC=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=y
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=y
CONFIG_XILINX_AXI_EMAC=y
CONFIG_XILINX_LL_TEMAC=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_QCOM_IPA=y
CONFIG_NET_SB1000=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=y

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_MESON_GXL_PHY=y
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_CYGNUS_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NET_PHYPTP=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
CONFIG_MAXLINEAR_GPHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_C45_TJA11XX_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_MICREL_KS8995MA=y
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_AT91=y
CONFIG_CAN_CAN327=y
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_SUN4I=y
CONFIG_CAN_XILINXCAN=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_CTUCANFD=y
CONFIG_CAN_CTUCANFD_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
CONFIG_CAN_RCAR=y
CONFIG_CAN_RCAR_CANFD=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_TSCAN1=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_MCP251XFD=y
CONFIG_CAN_MCP251XFD_SANITY=y

# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y

# end of CAN USB interfaces

CONFIG_CAN_DEBUG_DEVICES=y

#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=y
CONFIG_MCTP_TRANSPORT_I2C=y

# end of MCTP Device Drivers

CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=y
CONFIG_MDIO_XGENE=y
CONFIG_MDIO_ASPEED=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_MOXART=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MESON_G12A=y
CONFIG_MDIO_BUS_MUX_BCM6368=y
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y

#
# PCS device drivers
#
CONFIG_PCS_XPCS=y
CONFIG_PCS_LYNX=y
CONFIG_PCS_RZN1_MIIC=y

# end of PCS device drivers

CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
CONFIG_USB_RTL8153_ECM=y
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ATH_COMMON=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_TX99=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_USB=y
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=y
CONFIG_ATH10K=y
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_SDIO=y
CONFIG_ATH10K_USB=y
CONFIG_ATH10K_SNOC=y
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=y
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=y
CONFIG_ATH11K_AHB=y
CONFIG_ATH11K_DEBUG=y
CONFIG_ATH11K_DEBUGFS=y
CONFIG_ATH11K_SPECTRAL=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO_CS=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_CS=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_USB=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=y
CONFIG_MT76_CORE=y
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=y
CONFIG_MT76_SDIO=y
CONFIG_MT76x02_LIB=y
CONFIG_MT76x02_USB=y
CONFIG_MT76_CONNAC_LIB=y
CONFIG_MT76x0_COMMON=y
CONFIG_MT76x0U=y
CONFIG_MT76x2_COMMON=y
CONFIG_MT76x2U=y
CONFIG_MT7615_COMMON=y
CONFIG_MT7663_USB_SDIO_COMMON=y
CONFIG_MT7663U=y
CONFIG_MT7663S=y
CONFIG_MT7921_COMMON=y
CONFIG_MT7921S=y
CONFIG_MT7921U=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=y
CONFIG_WILC1000_SDIO=y
CONFIG_WILC1000_SPI=y
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=y
CONFIG_RT2500USB=y
CONFIG_RT73USB=y
CONFIG_RT2800USB=y
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_USB=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8XXXU=y
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=y
CONFIG_RTW89=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_USB=y
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_CW1200_WLAN_SPI=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_MAC80211_HWSIM=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_VIRT_WIFI=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_N2=y
CONFIG_C101=y
CONFIG_FSL_UCC_HDLC=y
CONFIG_SLIC_DS26522=y
CONFIG_LAPBETHER=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_CC2520=y
CONFIG_IEEE802154_ATUSB=y
CONFIG_IEEE802154_ADF7242=y
CONFIG_IEEE802154_CA8210=y
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=y
CONFIG_IEEE802154_HWSIM=y

#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=y
CONFIG_MHI_WWAN_CTRL=y
CONFIG_MHI_WWAN_MBIM=y
CONFIG_QCOM_BAM_DMUX=y
CONFIG_RPMSG_WWAN_CTRL=y

# end of Wireless WAN

CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_NETDEV_LEGACY_INIT=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCUSB=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_AMIGA=y
CONFIG_KEYBOARD_ATARI=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_CLPS711X=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_HIL_OLD=y
CONFIG_KEYBOARD_HIL=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_SNVS_PWRKEY=y
CONFIG_KEYBOARD_IMX=y
CONFIG_KEYBOARD_IMX_SC_KEY=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_SH_KEYSC=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MT6779=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_KEYBOARD_CYPRESS_SF=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_AMIGA=y
CONFIG_MOUSE_ATARI=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADC=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AMIGA=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PSXPAD_SPI=y
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_ILITEK=y
CONFIG_TOUCHSCREEN_IPROC=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_HTCPEN=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=y
CONFIG_TOUCHSCREEN_MIGOR=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MXS_LRADC=y
CONFIG_TOUCHSCREEN_MX25=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TS4800=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TOUCHSCREEN_SUR40=y
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_ARIEL_PWRBUTTON=y
CONFIG_INPUT_ARIZONA_HAPTICS=y
CONFIG_INPUT_ATC260X_ONKEY=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_PM8XXX_VIBRATOR=y
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_M68K_BEEP=y
CONFIG_INPUT_MAX77650_ONKEY=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_CPCAP_PWRBUTTON=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_HP_SDC_RTC=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_IQS626A=y
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_HISI_POWERKEY=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
CONFIG_INPUT_SC27XX_VIBRA=y
CONFIG_INPUT_STPMIC1_ONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_Q40KBD=y
CONFIG_SERIO_PARKBD=y
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y

# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_HP300=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_SERIAL_8250_ACCENT=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_BOCA=y
CONFIG_SERIAL_8250_EXAR_ST16C554=y
CONFIG_SERIAL_8250_HUB6=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_IOC3=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
CONFIG_SERIAL_8250_LPC18XX=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_8250_INGENIC=y
CONFIG_SERIAL_8250_PXA=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_8250_BCM7271=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
CONFIG_SERIAL_ATMEL_TTYAT=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_TEGRA_TCU=y
CONFIG_SERIAL_TEGRA_TCU_CONSOLE=y
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_HS_LPC32XX=y
CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=y
CONFIG_SERIAL_QE=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
CONFIG_SERIAL_MXS_AUART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=y
CONFIG_SERIAL_OWL_CONSOLE=y
CONFIG_SERIAL_RDA=y
CONFIG_SERIAL_RDA_CONSOLE=y
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=y
CONFIG_SERIAL_SUNPLUS_CONSOLE=y

# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
CONFIG_N_HDLC=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
CONFIG_NPCM7XX_KCS_IPMI_BMC=y
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
CONFIG_IPMI_KCS_BMC_SERIO=y
CONFIG_ASPEED_BT_IPMI_BMC=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_POLARFIRE_SOC=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_DTLK=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
CONFIG_IPWIRELESS=y

# end of PCMCIA character devices

CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=y
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_INFINEON=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y

# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y

# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
CONFIG_I2C_HIX5HD2=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
CONFIG_I2C_AT91=y CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=y CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=y
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_SLAVE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EMEV2=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y CONFIG_I2C_HIGHLANDER=y
CONFIG_I2C_HISI=y
CONFIG_I2C_IMG=y
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MICROCHIP_CORE=y
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QCOM_GENI=y
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SPRD=y
CONFIG_I2C_ST=y
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_TEGRA_BPMP=y
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_ICY=y
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_PCA_ISA=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y

# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y

# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
CONFIG_MIPI_I3C_HCI=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
CONFIG_SPI_ALTERA_DFL=y
CONFIG_SPI_AR934X=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_AT91_USART=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
CONFIG_SPI_BCM63XX=y
CONFIG_SPI_BCM63XX_HSSPI=y
CONFIG_SPI_BCM_QSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_CADENCE_XSPI=y
CONFIG_SPI_CLPS711X=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_DW_BT1=y
CONFIG_SPI_DW_BT1_DIRMAP=y
CONFIG_SPI_DLN2=y
CONFIG_SPI_EP93XX=y
CONFIG_SPI_FSI=y
CONFIG_SPI_FSL_LPSPI=y
CONFIG_SPI_FSL_QUADSPI=y
CONFIG_SPI_GXP=y
CONFIG_SPI_HISI_KUNPENG=y
CONFIG_SPI_HISI_SFC_V3XX=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMG_SPFI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_INGENIC=y
CONFIG_SPI_INTEL=y
CONFIG_SPI_INTEL_PLATFORM=y
CONFIG_SPI_JCORE=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_LP8841_RTC=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_MESON_SPICC=y
CONFIG_SPI_MESON_SPIFC=y
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MT65XX=y
CONFIG_SPI_MT7621=y
CONFIG_SPI_MTK_NOR=y
CONFIG_SPI_MTK_SNFI=y
CONFIG_SPI_NPCM_FIU=y
CONFIG_SPI_NPCM_PSPI=y
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=y
CONFIG_SPI_OMAP_100K=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PIC32=y
CONFIG_SPI_PIC32_SQI=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_ROCKCHIP_SFC=y
CONFIG_SPI_RPCIF=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_QUP=y
CONFIG_SPI_QCOM_GENI=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH=y
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SLAVE_MT27XX=y
CONFIG_SPI_SPRD=y
CONFIG_SPI_SPRD_ADI=y
CONFIG_SPI_STM32=y
CONFIG_SPI_STM32_QSPI=y
CONFIG_SPI_ST_SSC4=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_SPI_SUNPLUS_SP7021=y
CONFIG_SPI_SYNQUACER=y
CONFIG_SPI_MXIC=y
CONFIG_SPI_TEGRA210_QUAD=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_UNIPHIER=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_XLP=y
CONFIG_SPI_XTENSA_XTFPGA=y
CONFIG_SPI_ZYNQ_QSPI=y
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SPMI_MTK_PMIF=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
CONFIG_DP83640_PHY=y
CONFIG_PTP_1588_CLOCK_INES=y
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y

# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=y
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_DA9062=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STARFIVE=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
CONFIG_PINCTRL_S900=y
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
CONFIG_PINCTRL_BCM6358=y
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y

#
# Intel pinctrl drivers
#

# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=y
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
CONFIG_PINCTRL_MT8186=y
CONFIG_PINCTRL_MT8192=y
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
CONFIG_PINCTRL_MT8516=y
CONFIG_PINCTRL_MT6397=y

# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_WPCM450=y
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ4019=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8226=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8909=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
CONFIG_PINCTRL_MSM8976=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
CONFIG_PINCTRL_SC8180X=y
CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM660=y
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_SM6115=y
CONFIG_PINCTRL_SM6125=y
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
CONFIG_PINCTRL_SDX65=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
CONFIG_PINCTRL_SM8350=y
CONFIG_PINCTRL_SM8450=y
CONFIG_PINCTRL_LPASS_LPI=y

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
CONFIG_PINCTRL_PFC_R8A7740=y
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
CONFIG_PINCTRL_PFC_R8A7745=y
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
CONFIG_PINCTRL_PFC_SH7757=y
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y

# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
CONFIG_PINCTRL_STM32MP135=y
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=y
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
CONFIG_PINCTRL_UNIPHIER_PXS3=y
CONFIG_PINCTRL_UNIPHIER_NX1=y
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HISI=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_IOP=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=y
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_RDA=y
CONFIG_GPIO_ROCKCHIP=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_WCD934X=y
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
CONFIG_GPIO_AMD_FCH=y
CONFIG_GPIO_IDT3243X=y

# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=y

# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_UCB1400=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y

# end of MFD GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
CONFIG_GPIO_MOXTET=y

# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y

# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y

# end of Virtual GPIO drivers

CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y

# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y

# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_ATC260X=y
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_LINKSTATION=y
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_POWER_RESET_SC27XX=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_INGENIC=y
CONFIG_BATTERY_WM97XX=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_BATTERY_TWL4030_MADC=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_CPCAP=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_CROS_PCHG=y
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_RN5T618_POWER=y
CONFIG_BATTERY_ACER_A500=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=y CONFIG_SENSORS_AD7414=y CONFIG_SENSORS_AD7418=y CONFIG_SENSORS_ADM1025=y CONFIG_SENSORS_ADM1026=y CONFIG_SENSORS_ADM1029=y CONFIG_SENSORS_ADM1031=y CONFIG_SENSORS_ADM1177=y CONFIG_SENSORS_ADM9240=y CONFIG_SENSORS_ADT7X10=y CONFIG_SENSORS_ADT7310=y CONFIG_SENSORS_ADT7410=y CONFIG_SENSORS_ADT7411=y CONFIG_SENSORS_ADT7462=y CONFIG_SENSORS_ADT7470=y CONFIG_SENSORS_ADT7475=y CONFIG_SENSORS_AHT10=y CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y CONFIG_SENSORS_AS370=y CONFIG_SENSORS_ASC7621=y CONFIG_SENSORS_AXI_FAN_CONTROL=y CONFIG_SENSORS_ARM_SCMI=y CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_ASB100=y CONFIG_SENSORS_ASPEED=y CONFIG_SENSORS_ATXP1=y CONFIG_SENSORS_BT1_PVT=y CONFIG_SENSORS_BT1_PVT_ALARMS=y CONFIG_SENSORS_CORSAIR_CPRO=y CONFIG_SENSORS_CORSAIR_PSU=y CONFIG_SENSORS_DRIVETEMP=y CONFIG_SENSORS_DS620=y CONFIG_SENSORS_DS1621=y CONFIG_SENSORS_DA9052_ADC=y CONFIG_SENSORS_DA9055=y CONFIG_SENSORS_SPARX5=y CONFIG_SENSORS_F71805F=y CONFIG_SENSORS_F71882FG=y CONFIG_SENSORS_F75375S=y CONFIG_SENSORS_GSC=y CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_FSCHMD=y CONFIG_SENSORS_FTSTEUTATES=y CONFIG_SENSORS_GL518SM=y CONFIG_SENSORS_GL520SM=y CONFIG_SENSORS_G760A=y CONFIG_SENSORS_G762=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_HIH6130=y CONFIG_SENSORS_IBMAEM=y CONFIG_SENSORS_IBMPEX=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_IT87=y CONFIG_SENSORS_JC42=y CONFIG_SENSORS_POWR1220=y CONFIG_SENSORS_LAN966X=y CONFIG_SENSORS_LINEAGE=y CONFIG_SENSORS_LOCHNAGAR=y CONFIG_SENSORS_LTC2945=y CONFIG_SENSORS_LTC2947=y CONFIG_SENSORS_LTC2947_I2C=y CONFIG_SENSORS_LTC2947_SPI=y CONFIG_SENSORS_LTC2990=y CONFIG_SENSORS_LTC2992=y CONFIG_SENSORS_LTC4151=y CONFIG_SENSORS_LTC4215=y CONFIG_SENSORS_LTC4222=y CONFIG_SENSORS_LTC4245=y CONFIG_SENSORS_LTC4260=y CONFIG_SENSORS_LTC4261=y CONFIG_SENSORS_MAX1111=y CONFIG_SENSORS_MAX127=y CONFIG_SENSORS_MAX16065=y CONFIG_SENSORS_MAX1619=y CONFIG_SENSORS_MAX1668=y CONFIG_SENSORS_MAX197=y CONFIG_SENSORS_MAX31722=y CONFIG_SENSORS_MAX31730=y CONFIG_SENSORS_MAX6620=y CONFIG_SENSORS_MAX6621=y CONFIG_SENSORS_MAX6639=y CONFIG_SENSORS_MAX6650=y CONFIG_SENSORS_MAX6697=y CONFIG_SENSORS_MAX31790=y CONFIG_SENSORS_MCP3021=y CONFIG_SENSORS_MLXREG_FAN=y CONFIG_SENSORS_TC654=y CONFIG_SENSORS_TPS23861=y CONFIG_SENSORS_MENF21BMC_HWMON=y CONFIG_SENSORS_MR75203=y CONFIG_SENSORS_ADCXX=y CONFIG_SENSORS_LM63=y CONFIG_SENSORS_LM70=y CONFIG_SENSORS_LM73=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM77=y CONFIG_SENSORS_LM78=y CONFIG_SENSORS_LM80=y CONFIG_SENSORS_LM83=y CONFIG_SENSORS_LM85=y CONFIG_SENSORS_LM87=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_SENSORS_LM93=y CONFIG_SENSORS_LM95234=y CONFIG_SENSORS_LM95241=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_PC87360=y CONFIG_SENSORS_PC87427=y CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_SENSORS_NCT6683=y CONFIG_SENSORS_NCT6775_CORE=y CONFIG_SENSORS_NCT6775=y CONFIG_SENSORS_NCT6775_I2C=y CONFIG_SENSORS_NCT7802=y CONFIG_SENSORS_NCT7904=y CONFIG_SENSORS_NPCM7XX=y CONFIG_SENSORS_NSA320=y CONFIG_SENSORS_NZXT_KRAKEN2=y CONFIG_SENSORS_NZXT_SMART2=y CONFIG_SENSORS_OCC_P8_I2C=y CONFIG_SENSORS_OCC_P9_SBE=y CONFIG_SENSORS_OCC=y CONFIG_SENSORS_PCF8591=y CONFIG_SENSORS_PECI_CPUTEMP=y CONFIG_SENSORS_PECI_DIMMTEMP=y CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y CONFIG_SENSORS_ADM1266=y CONFIG_SENSORS_ADM1275=y CONFIG_SENSORS_BEL_PFE=y CONFIG_SENSORS_BPA_RS600=y CONFIG_SENSORS_DELTA_AHE50DC_FAN=y CONFIG_SENSORS_FSP_3Y=y CONFIG_SENSORS_IBM_CFFPS=y CONFIG_SENSORS_DPS920AB=y CONFIG_SENSORS_INSPUR_IPSPS=y CONFIG_SENSORS_IR35221=y CONFIG_SENSORS_IR36021=y CONFIG_SENSORS_IR38064=y CONFIG_SENSORS_IR38064_REGULATOR=y CONFIG_SENSORS_IRPS5401=y CONFIG_SENSORS_ISL68137=y CONFIG_SENSORS_LM25066=y CONFIG_SENSORS_LM25066_REGULATOR=y CONFIG_SENSORS_LT7182S=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_SENSORS_LTC3815=y CONFIG_SENSORS_MAX15301=y CONFIG_SENSORS_MAX16064=y CONFIG_SENSORS_MAX16601=y CONFIG_SENSORS_MAX20730=y CONFIG_SENSORS_MAX20751=y CONFIG_SENSORS_MAX31785=y CONFIG_SENSORS_MAX34440=y CONFIG_SENSORS_MAX8688=y CONFIG_SENSORS_MP2888=y CONFIG_SENSORS_MP2975=y CONFIG_SENSORS_MP5023=y CONFIG_SENSORS_PIM4328=y CONFIG_SENSORS_PLI1209BC=y CONFIG_SENSORS_PLI1209BC_REGULATOR=y CONFIG_SENSORS_PM6764TR=y CONFIG_SENSORS_PXE1610=y CONFIG_SENSORS_Q54SJ108A2=y CONFIG_SENSORS_STPDDC60=y CONFIG_SENSORS_TPS40422=y CONFIG_SENSORS_TPS53679=y CONFIG_SENSORS_UCD9000=y CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_XDPE152=y CONFIG_SENSORS_XDPE122=y CONFIG_SENSORS_XDPE122_REGULATOR=y CONFIG_SENSORS_ZL6100=y CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_RASPBERRYPI_HWMON=y CONFIG_SENSORS_SL28CPLD=y CONFIG_SENSORS_SBTSI=y CONFIG_SENSORS_SBRMI=y CONFIG_SENSORS_SHT15=y CONFIG_SENSORS_SHT21=y CONFIG_SENSORS_SHT3x=y CONFIG_SENSORS_SHT4x=y CONFIG_SENSORS_SHTC1=y CONFIG_SENSORS_SY7636A=y CONFIG_SENSORS_DME1737=y CONFIG_SENSORS_EMC1403=y CONFIG_SENSORS_EMC2103=y CONFIG_SENSORS_EMC6W201=y CONFIG_SENSORS_SMSC47M1=y CONFIG_SENSORS_SMSC47M192=y CONFIG_SENSORS_SMSC47B397=y CONFIG_SENSORS_SCH56XX_COMMON=y CONFIG_SENSORS_SCH5627=y CONFIG_SENSORS_SCH5636=y CONFIG_SENSORS_STTS751=y CONFIG_SENSORS_SMM665=y CONFIG_SENSORS_ADC128D818=y CONFIG_SENSORS_ADS7828=y CONFIG_SENSORS_ADS7871=y CONFIG_SENSORS_AMC6821=y CONFIG_SENSORS_INA209=y CONFIG_SENSORS_INA2XX=y CONFIG_SENSORS_INA238=y CONFIG_SENSORS_INA3221=y CONFIG_SENSORS_TC74=y CONFIG_SENSORS_THMC50=y CONFIG_SENSORS_TMP102=y CONFIG_SENSORS_TMP103=y CONFIG_SENSORS_TMP108=y CONFIG_SENSORS_TMP401=y CONFIG_SENSORS_TMP421=y CONFIG_SENSORS_TMP464=y CONFIG_SENSORS_TMP513=y CONFIG_SENSORS_VT1211=y CONFIG_SENSORS_W83773G=y CONFIG_SENSORS_W83781D=y CONFIG_SENSORS_W83791D=y CONFIG_SENSORS_W83792D=y CONFIG_SENSORS_W83793=y CONFIG_SENSORS_W83795=y CONFIG_SENSORS_W83795_FANCTRL=y CONFIG_SENSORS_W83L785TS=y CONFIG_SENSORS_W83L786NG=y CONFIG_SENSORS_W83627HF=y CONFIG_SENSORS_W83627EHF=y CONFIG_SENSORS_WM831X=y CONFIG_SENSORS_WM8350=y CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y CONFIG_THERMAL_STATISTICS=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_THERMAL_MMIO=y CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=y CONFIG_IMX_SC_THERMAL=y CONFIG_IMX8MM_THERMAL=y CONFIG_K3_THERMAL=y CONFIG_MAX77620_THERMAL=y CONFIG_QORIQ_THERMAL=y CONFIG_SPEAR_THERMAL=y CONFIG_SUN8I_THERMAL=y CONFIG_ROCKCHIP_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y CONFIG_RZG2L_THERMAL=y CONFIG_KIRKWOOD_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DA9062_THERMAL=y CONFIG_MTK_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#

# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
CONFIG_BCM2835_THERMAL=y
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y

# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
CONFIG_OMAP3_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y

# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y

# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y

# end of NVIDIA Tegra thermal drivers

CONFIG_GENERIC_ADC_THERMAL=y

#
# Qualcomm thermal drivers
#
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_SPMI_ADC_TM5=y
CONFIG_QCOM_SPMI_TEMP_ALARM=y

# end of Qualcomm thermal drivers

CONFIG_UNIPHIER_THERMAL=y
CONFIG_SPRD_THERMAL=y
CONFIG_KHADAS_MCU_FAN_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_SL28CPLD_WATCHDOG=y
CONFIG_ARMADA_37XX_WATCHDOG=y
CONFIG_ASM9260_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_FTWDT010_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_EP93XX_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_K3_RTI_WATCHDOG=y
CONFIG_RN5T618_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
CONFIG_TS72XX_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_IMX7ULP_WDT=y
CONFIG_RETU_WATCHDOG=y
CONFIG_MOXART_WDT=y
CONFIG_ST_LPC_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=y
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_LPC18XX_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_RENESAS_RZAWDT=y
CONFIG_RENESAS_RZN1WDT=y
CONFIG_RENESAS_RZG2LWDT=y
CONFIG_ASPEED_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_RTD119X_WATCHDOG=y
CONFIG_REALTEK_OTTO_WDT=y
CONFIG_SPRD_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=y
CONFIG_VISCONTI_WATCHDOG=y
CONFIG_MSC313E_WATCHDOG=y
CONFIG_APPLE_WATCHDOG=y
CONFIG_SUNPLUS_WATCHDOG=y
CONFIG_SC520_WDT=y
CONFIG_KEMPLD_WDT=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM_KONA_WDT_DEBUG=y
CONFIG_BCM7038_WDT=y
CONFIG_IMGPDC_WDT=y
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=y
CONFIG_UML_WATCHDOG=y

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=y
CONFIG_WDT=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SC27XX_PMIC=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y

# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_INTEL_M10_BMC=y
CONFIG_MFD_RSMU_I2C=y
CONFIG_MFD_RSMU_SPI=y

# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_ARM_SCMI=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_CROS_EC=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_HI6421V600=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6380=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STM32_BOOSTER=y
CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_STW481X_VMMC=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_FINTEK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=y
CONFIG_IR_IGORPLUGUSB=y
CONFIG_IR_IGUANA=y
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_MESON=y
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_PWM_TX=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_RX51=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SPI=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_SUNXI=y
CONFIG_IR_TOY=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
CONFIG_RC_XBOX_DVD=y
CONFIG_IR_IMG=y
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_IR_IMG_RC5=y
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_CROS_EC=y
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
CONFIG_CEC_GPIO=y
CONFIG_CEC_SAMSUNG_S5P=y
CONFIG_CEC_STI=y
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y

# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y

# end of Media device types

CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_JPEG_HELPER=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y

# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y

# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y

# end of Digital TV options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers' #

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_VIDEO_CPIA2=y
CONFIG_USB_GSPCA=y
CONFIG_USB_GSPCA_BENQ=y
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
CONFIG_USB_GSPCA_SONIXJ=y
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SPCA500=y
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
CONFIG_USB_GSPCA_SPCA506=y
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_SQ905=y
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TOPRO=y
CONFIG_USB_GSPCA_TOUPTEK=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_USB_GL860=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=y
CONFIG_VIDEO_USBTV=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=y
CONFIG_VIDEO_GO7007_USB=y
CONFIG_VIDEO_GO7007_LOADER=y
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=y
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=y
CONFIG_VIDEO_CX231XX_DVB=y
CONFIG_VIDEO_TM6000=y
CONFIG_VIDEO_TM6000_ALSA=y
CONFIG_VIDEO_TM6000_DVB=y

#
# Digital TV USB devices
#
CONFIG_DVB_AS102=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_DVBSKY=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
CONFIG_DVB_USB_ZD1301=y
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_AZ6027=y
CONFIG_DVB_USB_CINERGY_T2=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_DIB3000MC=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_DTV5100=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_PCTV452E=y
CONFIG_DVB_USB_TECHNISAT_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_VP7045=y
CONFIG_SMS_USB_DRV=y

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
CONFIG_VIDEO_EM28XX_ALSA=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_EM28XX_RC=y

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_SI476X=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y
CONFIG_USB_DSBR=y
CONFIG_USB_KEENE=y
CONFIG_USB_MA901=y
CONFIG_USB_MR800=y
CONFIG_USB_RAREMONO=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_RADIO_WL128X=y
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_AZTECH=y
CONFIG_RADIO_AZTECH_PORT=350
CONFIG_RADIO_CADET=y
CONFIG_RADIO_GEMTEK=y
CONFIG_RADIO_GEMTEK_PORT=34c
CONFIG_RADIO_GEMTEK_PROBE=y
CONFIG_RADIO_ISA=y
CONFIG_RADIO_RTRACK=y
CONFIG_RADIO_RTRACK2=y
CONFIG_RADIO_RTRACK2_PORT=30c
CONFIG_RADIO_RTRACK_PORT=30f
CONFIG_RADIO_SF16FMI=y
CONFIG_RADIO_SF16FMR2=y
CONFIG_RADIO_TERRATEC=y
CONFIG_RADIO_TRUST=y
CONFIG_RADIO_TRUST_PORT=350
CONFIG_RADIO_TYPHOON=y
CONFIG_RADIO_TYPHOON_MUTEFREQ=87500
CONFIG_RADIO_TYPHOON_PORT=316
CONFIG_RADIO_ZOLTRIX=y
CONFIG_RADIO_ZOLTRIX_PORT=20c
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_MUX=y

#
# Allegro DVT media platform drivers
#
CONFIG_VIDEO_ALLEGRO_DVT=y

#
# Amlogic media platform drivers
#
CONFIG_VIDEO_MESON_GE2D=y

#
# Amphion drivers
#
CONFIG_VIDEO_AMPHION_VPU=y

#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=y

#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISC=y
CONFIG_VIDEO_ATMEL_XISC=y
CONFIG_VIDEO_ATMEL_ISC_BASE=y
CONFIG_VIDEO_ATMEL_ISI=y
CONFIG_VIDEO_MICROCHIP_CSI2DC=y

#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=y
CONFIG_VIDEO_CADENCE_CSI2TX=y

#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=y
CONFIG_VIDEO_IMX_VDOA=y

#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=y

#
# Marvell media platform drivers
#
CONFIG_VIDEO_MMP_CAMERA=y

#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=y
CONFIG_VIDEO_MEDIATEK_MDP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_SCP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=y
CONFIG_VIDEO_MEDIATEK_VPU=y

#
# NVidia media platform drivers
#
CONFIG_VIDEO_TEGRA_VDE=y

#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=y
CONFIG_VIDEO_VIU=y
CONFIG_VIDEO_IMX_PXP=y
CONFIG_VIDEO_MX2_EMMAPRP=y
CONFIG_VIDEO_IMX8_JPEG=y

#
# Qualcomm media platform drivers
#
CONFIG_VIDEO_QCOM_CAMSS=y
CONFIG_VIDEO_QCOM_VENUS=y

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=y
CONFIG_VIDEO_RCAR_ISP=y
CONFIG_VIDEO_SH_VOU=y
CONFIG_VIDEO_RCAR_CSI2=y
CONFIG_VIDEO_RCAR_VIN=y
CONFIG_VIDEO_RENESAS_FCP=y
CONFIG_VIDEO_RENESAS_FDP1=y
CONFIG_VIDEO_RENESAS_JPU=y
CONFIG_VIDEO_RENESAS_VSP1=y
CONFIG_VIDEO_RCAR_DRIF=y

#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_RGA=y
CONFIG_VIDEO_ROCKCHIP_ISP1=y

#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
CONFIG_VIDEO_EXYNOS4_IS_COMMON=y
CONFIG_VIDEO_S5P_FIMC=y
CONFIG_VIDEO_S5P_MIPI_CSIS=y
CONFIG_VIDEO_EXYNOS_FIMC_LITE=y
CONFIG_VIDEO_EXYNOS4_FIMC_IS=y
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
CONFIG_VIDEO_SAMSUNG_S5P_G2D=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y

#
# STMicroelectronics media platform drivers
#
CONFIG_VIDEO_STI_BDISP=y
CONFIG_DVB_C8SECTPFE=y
CONFIG_VIDEO_STI_DELTA=y
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_DELTA_DRIVER=y
CONFIG_VIDEO_STI_HVA=y
CONFIG_VIDEO_STI_HVA_DEBUGFS=y
CONFIG_VIDEO_STM32_DCMI=y
CONFIG_VIDEO_STM32_DMA2D=y

#
# Sunxi media platform drivers
#
CONFIG_VIDEO_SUN4I_CSI=y
CONFIG_VIDEO_SUN6I_CSI=y

#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=y
CONFIG_VIDEO_TI_SC=y
CONFIG_VIDEO_TI_CSC=y
CONFIG_VIDEO_TI_CAL=y
CONFIG_VIDEO_TI_CAL_MC=y
CONFIG_VIDEO_TI_VPE=y
CONFIG_VIDEO_TI_VPE_DEBUG=y
CONFIG_VIDEO_AM437X_VPFE=y
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y
CONFIG_VIDEO_DM6446_CCDC=y
CONFIG_VIDEO_DM355_CCDC=y
CONFIG_VIDEO_DM365_ISIF=y
CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY=y
CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
CONFIG_VIDEO_OMAP2_VOUT=y
CONFIG_VIDEO_OMAP3=y
CONFIG_VIDEO_OMAP3_DEBUG=y

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=y
CONFIG_VIDEO_XILINX_CSI2RXSS=y
CONFIG_VIDEO_XILINX_TPG=y
CONFIG_VIDEO_XILINX_VTC=y

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
CONFIG_VIDEO_VIVID=y
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=y

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#

# common driver options
#
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_TTPCI_EEPROM=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
# end of Media drivers

6,078 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#24 lore raw

Re: [PATCH v38 06/39] LSM: lsm_self_attr syscall for LSM self attributes

In reply to Casey Schaufler
I love your patch! Perhaps something to improve:

Hi Casey,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v6.0-rc7]
[cannot apply to pcmoore-audit/next pcmoore-selinux/next zohar-integrity/next-integrity next-20220927] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Casey-Schaufler/LSM-Identify-modules-by-more-than-name/20220928-045406
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 46452d3786a82bd732ba73fb308ae5cbe4e1e591
config: s390-defconfig
compiler: s390-linux-gcc (GCC) 12.1.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/e614eb870ca4cc351e1847e79041960feb9604dc
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Casey-Schaufler/LSM-Identify-modules-by-more-than-name/20220928-045406 git checkout e614eb870ca4cc351e1847e79041960feb9604dc
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=s390 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>

All warnings (new ones prefixed by >>):

>> security/lsm_syscalls.c:51: warning: expecting prototype for lsm_self_attr(). Prototype was for sys_lsm_self_attr() instead

vim +51 security/lsm_syscalls.c

33
34 /**
35 * lsm_self_attr - Return current task's security module attributes
36 * @ctx: the LSM contexts
37 * @size: size of @ctx, updated on return
38 * @flags: reserved for future use, must be zero
39 *
40 * Returns the calling task's LSM contexts. On success this
41 * function returns the number of @ctx array elements. This value
42 * may be zero if there are no LSM contexts assigned. If @size is
43 * insufficient to contain the return data -E2BIG is returned and
44 * @size is set to the minimum required size. In all other cases
45 * a negative value indicating the error is returned.
46 */
47 SYSCALL_DEFINE3(lsm_self_attr,
48 struct lsm_ctx __user *, ctx,
49 size_t __user *, size,
50 int, flags)

  > 51	{
Signature · 2 lines
0-DAY CI Kernel Test Service
https://01.org/lkp

#
# Automatically generated file; DO NOT EDIT. # Linux/s390 6.0.0-rc7 Kernel Configuration #
CONFIG_CC_VERSION_TEXT="s390-linux-gcc (GCC) 12.1.0" CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100 CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_HAVE_KERNEL_UNCOMPRESSED=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
# CONFIG_KERNEL_UNCOMPRESSED is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set

# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_TIME_KUNIT_TEST is not set
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_LSM=y

# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SCHED_CORE=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set

# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y

# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set

#
# Scheduler features
#

# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_CC_HAS_INT128=y CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC12_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_EMBED is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set

# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y

# end of General setup

CONFIG_MMU=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_PGSTE=y
CONFIG_AUDIT_ARCH=y
CONFIG_NO_IOPORT_MAP=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_S390=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y

#
# Processor type and features
#
CONFIG_HAVE_MARCH_Z10_FEATURES=y
CONFIG_HAVE_MARCH_Z196_FEATURES=y
CONFIG_HAVE_MARCH_ZEC12_FEATURES=y
# CONFIG_MARCH_Z10 is not set
# CONFIG_MARCH_Z196 is not set
CONFIG_MARCH_ZEC12=y
# CONFIG_MARCH_Z13 is not set
# CONFIG_MARCH_Z14 is not set
# CONFIG_MARCH_Z15 is not set
CONFIG_MARCH_ZEC12_TUNE=y
# CONFIG_TUNE_DEFAULT is not set
# CONFIG_TUNE_Z10 is not set
# CONFIG_TUNE_Z196 is not set
CONFIG_TUNE_ZEC12=y
# CONFIG_TUNE_Z13 is not set
# CONFIG_TUNE_Z14 is not set
# CONFIG_TUNE_Z15 is not set
# CONFIG_TUNE_Z16 is not set
CONFIG_64BIT=y
CONFIG_COMMAND_LINE_SIZE=4096
CONFIG_COMPAT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=1
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_BOOK=y
CONFIG_SCHED_DRAWER=y
CONFIG_SCHED_TOPOLOGY=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
# CONFIG_KERNEL_NOBP is not set
CONFIG_EXPOLINE=y
# CONFIG_EXPOLINE_EXTERN is not set
# CONFIG_EXPOLINE_OFF is not set
CONFIG_EXPOLINE_AUTO=y
# CONFIG_EXPOLINE_FULL is not set
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set

# end of Processor type and features

#
# Memory setup
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_PHYSMEM_BITS=46

# end of Memory setup

#
# I/O subsystem
#
CONFIG_QDIO=y
CONFIG_PCI_NR_FUNCTIONS=512
CONFIG_HAS_IOMEM=y
CONFIG_CHSC_SCH=y
CONFIG_SCM_BUS=y
CONFIG_EADM_SCH=m
CONFIG_VFIO_CCW=m
CONFIG_VFIO_AP=m

# end of I/O subsystem

#
# Dump support
#
CONFIG_CRASH_DUMP=y

# end of Dump support

CONFIG_CCW=y
CONFIG_HAVE_PNETID=y

#
# Virtualization
#
CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y
CONFIG_PFAULT=y
CONFIG_CMM=m
CONFIG_CMM_IUCV=y
CONFIG_APPLDATA_BASE=y
CONFIG_APPLDATA_MEM=m
CONFIG_APPLDATA_OS=m
CONFIG_APPLDATA_NET_SUM=m
CONFIG_S390_HYPFS_FS=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_KVM_ASYNC_PF_SYNC=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_INVALID_WAKEUPS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_S390_UCONTROL is not set
CONFIG_S390_GUEST=y

# end of Virtualization

CONFIG_S390_MODULES_SANITY_TEST_HELPERS=y

#
# Selftests
#
CONFIG_S390_UNWIND_SELFTEST=m
CONFIG_S390_KPROBES_SANITY_TEST=m
CONFIG_S390_MODULES_SANITY_TEST=m

# end of Selftests

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_ARCH_WANTS_NO_INSTR=y CONFIG_ARCH_32BIT_USTAT_F_TINODE=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_MMU_GATHER_NO_GATHER=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_LTO_NONE=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_IDLE=y CONFIG_ARCH_HAS_SCALED_CPUTIME=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_SOFTIRQ_ON_OWN_STACK=y CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_CLONE_BACKWARDS2=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y CONFIG_COMPAT_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_ARCH_HAS_MEM_ENCRYPT=y CONFIG_ARCH_HAS_VDSO_DATA=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y

# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set

# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set CONFIG_MODULE_SIG_HASH="sha256" CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set CONFIG_BLK_INLINE_ENCRYPTION=y CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_IBM_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set

# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_TRYLOCK=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_SPIN_TRYLOCK=y
CONFIG_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_INLINE_SPIN_LOCK=y
CONFIG_INLINE_SPIN_LOCK_BH=y
CONFIG_INLINE_SPIN_LOCK_IRQ=y
CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_INLINE_SPIN_UNLOCK_BH=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_READ_TRYLOCK=y
CONFIG_INLINE_READ_LOCK=y
CONFIG_INLINE_READ_LOCK_BH=y
CONFIG_INLINE_READ_LOCK_IRQ=y
CONFIG_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_BH=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_WRITE_TRYLOCK=y
CONFIG_INLINE_WRITE_LOCK=y
CONFIG_INLINE_WRITE_LOCK_BH=y
CONFIG_INLINE_WRITE_LOCK_IRQ=y
CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_BH=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y

# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_PHYS_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set

# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_XFRM_ESPINTCP=y
CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_IPV6_RPL_LWTUNNEL=y
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
# CONFIG_MPTCP_KUNIT_TEST is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m

# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_TWOS=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
# CONFIG_NFT_DUP_IPV4 is not set
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
# CONFIG_IP6_NF_TARGET_NPT is not set

# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NFT_BRIDGE_REJECT is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=y
CONFIG_GARP=m
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_BRIDGE_MRP=y
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_ACT_GATE=m
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set

# end of Network testing
# end of Networking options

# CONFIG_CAN is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
# CONFIG_NETDEV_ADDR_LIST_TEST is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_S390=y

#
# PCI controller drivers
#

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set

# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#

# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#

# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set

# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set

# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set

# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol #

# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#

# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# S/390 block device drivers
#
CONFIG_DCSSBLK=m
CONFIG_DASD=y
CONFIG_DASD_PROFILE=y
CONFIG_DASD_ECKD=y
CONFIG_DASD_FBA=y
CONFIG_DASD_DIAG=y
CONFIG_DASD_EER=y
CONFIG_SCM_BLOCK=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_RDMA is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set

# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set

# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline #

# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C) #
CONFIG_GENWQE=m CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set

# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m

# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m

# end of SCSI device support

# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set # CONFIG_BCACHE_ASYNC_REGISTRATION is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set CONFIG_DM_CLONE=m
CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m CONFIG_DM_MULTIPATH_HST=m CONFIG_DM_MULTIPATH_IOA=m CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set CONFIG_DM_INTEGRITY=m
CONFIG_DM_AUDIT=y
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set

# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
CONFIG_BAREUDP=m
# CONFIG_GTP is not set
CONFIG_AMT=m
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_SAMPLE=y
# CONFIG_MLX5_CORE_IPOIB is not set
CONFIG_MLX5_SW_STEERING=y
# CONFIG_MLX5_SF is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#

# end of PCS device drivers

CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m

#
# S/390 network device drivers
#
CONFIG_LCS=m
CONFIG_CTCM=m
CONFIG_NETIUCV=m
CONFIG_SMSGIUCV=m
CONFIG_SMSGIUCV_EVENT=m
CONFIG_QETH=y
CONFIG_QETH_L2=y
CONFIG_QETH_L3=y
CONFIG_QETH_OSX=y
CONFIG_CCWGROUP=y
CONFIG_ISM=m

# end of S/390 network device drivers

#
# Host-side USB support is needed for USB Network Adapter support #
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set

# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set

# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IUCV=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_S390=m
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
# CONFIG_TCG_VTPM_PROXY is not set

#
# S/390 character device drivers
#
CONFIG_TN3270=y
CONFIG_TN3270_TTY=y
CONFIG_TN3270_FS=y
CONFIG_TN3270_CONSOLE=y
CONFIG_TN3215=y
CONFIG_TN3215_CONSOLE=y
CONFIG_CCW_CONSOLE=y
CONFIG_SCLP_TTY=y
CONFIG_SCLP_CONSOLE=y
CONFIG_SCLP_VT220_TTY=y
CONFIG_SCLP_VT220_CONSOLE=y
CONFIG_HMC_DRV=m
# CONFIG_SCLP_OFB is not set
CONFIG_S390_UV_UAPI=m
CONFIG_S390_TAPE=m

#
# S/390 tape hardware support
#
CONFIG_S390_TAPE_34XX=m
CONFIG_S390_TAPE_3590=m
CONFIG_VMLOGRDR=m
CONFIG_VMCP=y
CONFIG_VMCP_CMA_SIZE=4
CONFIG_MONREADER=m
CONFIG_MONWRITER=m
CONFIG_S390_VMUR=m
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

# end of Character devices

#
# I2C support
#
# CONFIG_I2C is not set

# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #

# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_DIAG288_WATCHDOG=m

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_MADERA is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set

# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set

# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set

#
# ARM devices
#

# end of ARM devices

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set

# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set

# end of Backlight & LCD device support

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set

# end of Console display driver support

# CONFIG_LOGO is not set

# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set

# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
# CONFIG_INFINIBAND_ERDMA is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_RDMA_RXE is not set
# CONFIG_RDMA_SIW is not set
# CONFIG_INFINIBAND_IPOIB is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set

# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_ZDEV_KVM=y
CONFIG_MLX5_VFIO_PCI=m
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=m
CONFIG_VIRTIO_PCI_LIB_LEGACY=m
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#

# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#

# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#

# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_S390_IOMMU=y
CONFIG_S390_CCW_IOMMU=y
CONFIG_S390_AP_IOMMU=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set

# end of Rpmsg drivers

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#

# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#

# end of NXP/Freescale QorIQ SoC drivers

#

# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#

# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#

# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#

# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#

# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#

# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set

# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set

# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#

# end of Performance monitor support

# CONFIG_RAS is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set

# end of Android

# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set

# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
# CONFIG_EXT4_KUNIT_TESTS is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_LIMITED=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_FUSE_DAX=y
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set

# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m

# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_FAT_KUNIT_TEST is not set
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set

# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m

# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DISABLE_UDP_SUPPORT=y CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set CONFIG_NFSD_V4_SECURITY_LABEL=y CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_SWAP=y CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set # CONFIG_SUNRPC_DEBUG is not set CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG is not set CONFIG_CIFS_DFS_UPCALL=y CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEPRECATED_API is not set
# CONFIG_DLM_DEBUG is not set CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set CONFIG_IO_WQ=y

# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0 CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set CONFIG_SECURITY_LOCKDOWN_LSM=y CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set CONFIG_IMA_DEFAULT_HASH_SHA256=y
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set CONFIG_IMA_DEFAULT_HASH="sha256"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_IMA_DISABLE_HTABLE is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set

# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y

# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API" # CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set # CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=m

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECDSA=m
CONFIG_CRYPTO_ECRDSA=m
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_S390=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLYVAL=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA512_S390=m
CONFIG_CRYPTO_SHA1_S390=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA256_S390=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SHA3_256_S390=m
CONFIG_CRYPTO_SHA3_512_S390=m
CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_SM3_GENERIC=m
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_S390=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA_S390=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_ARIA=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
# CONFIG_ZCRYPT_DEBUG is not set
CONFIG_ZCRYPT_MULTIDEVNODES=y
CONFIG_PKEY=m
CONFIG_CRYPTO_PAES_S390=m
CONFIG_S390_PRNG=m
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set

# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y

# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_DFLTCC=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y

# end of Library routines

#
# Kernel hacking
#

#

# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_DEBUG_INFO_BTF=y CONFIG_PAHOLE_HAS_SPLIT_BTF=y CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set

# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set

# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set

# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set

# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m

# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y

# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set

# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y

# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set

# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_NOP_MCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_FUNCTION_PROFILER=y CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_BLK_DEV_IO_TRACE=y CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_BPF_KPROBE_OVERRIDE=y CONFIG_FTRACE_MCOUNT_RECORD=y CONFIG_FTRACE_MCOUNT_USE_CC=y CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set # CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set

#

# s390 Debugging
#
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_CIO_INJECT is not set
# end of s390 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
CONFIG_KUNIT_DEBUGFS=y
# CONFIG_KUNIT_TEST is not set
# CONFIG_KUNIT_EXAMPLE_TEST is not set
# CONFIG_KUNIT_ALL_TESTS is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
# CONFIG_CPUMASK_KUNIT_TEST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_TEST_DIV64 is not set
CONFIG_KPROBES_SANITY_TEST=m
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_BITFIELD_KUNIT is not set
# CONFIG_HASH_KUNIT_TEST is not set
# CONFIG_RESOURCE_KUNIT_TEST is not set
# CONFIG_SYSCTL_KUNIT_TEST is not set
# CONFIG_LIST_KUNIT_TEST is not set
# CONFIG_LINEAR_RANGES_TEST is not set
# CONFIG_CMDLINE_KUNIT_TEST is not set
# CONFIG_BITS_TEST is not set
# CONFIG_SLUB_KUNIT_TEST is not set
# CONFIG_MEMCPY_KUNIT_TEST is not set
# CONFIG_OVERFLOW_KUNIT_TEST is not set
# CONFIG_STACKINIT_KUNIT_TEST is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_LIVEPATCH=m
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set

# end of Kernel Testing and Coverage
# end of Kernel hacking
maintainer
#25 lore raw

Re: [PATCH v38 06/39] LSM: lsm_self_attr syscall for LSM self attributes

In reply to Casey Schaufler

At least [email protected] should be in Cc for new syscalls.

You need a dedicated patch to wire this syscall with all architectures. It will help a lot dealing with merge conflicts because of other new syscalls. You can take a look at the Landlock syscall implementations: https://git.kernel.org/c/torvalds/a49f4f81cb48925e8d7cbd9e59068f516e984144

About the name, I'd suggest using a verb, something like lsm_get_self_attr.

Quoted 4 lines · Casey Schaufler

Create a system call lsm_self_attr() to provide the security module maintained attributes of the current process. Historically these attributes have been exposed to user space via entries in procfs under /proc/self/attr.

I think this paragraph is not enough to justify a new syscall. We should highlight what is not possible (or difficult) to do with the filesystem: e.g.
- usable in a sandbox which may not have access to the filesystem (but is that a good thing here?);
- clearly defined ABI/format;
- …?

What is the goal of this syscall? How will it be used? By who?

Quoted 4 lines

Attributes are provided as a collection of lsm_ctx structures which are placed into a user supplied buffer. Each structure identifys the security module providing the attribute, which

"identifies"

Quoted 65 lines

of the possible attributes is provided, the size of the attribute, and finally the attribute value. The format of the attribute value is defined by the security module, but will always be \0 terminated. The ctx_len value will be larger than strlen(ctx).

	------------------------------
	| unsigned int id            |
	------------------------------
	| unsigned int flags         |
	------------------------------
	| __kernel_size_t ctx_len    |
	------------------------------
	| unsigned char ctx[ctx_len] |
	------------------------------
	| unsigned int id            |
	------------------------------
	| unsigned int flags         |
	------------------------------
	| __kernel_size_t ctx_len    |
	------------------------------
	| unsigned char ctx[ctx_len] |
	------------------------------
---
  arch/x86/entry/syscalls/syscall_64.tbl |   1 +
  include/linux/syscalls.h               |   1 +
  include/uapi/asm-generic/unistd.h      |   5 +-
  include/uapi/linux/lsm.h               |  21 ++++
  kernel/sys_ni.c                        |   3 +
  security/Makefile                      |   1 +
  security/lsm_syscalls.c                | 156 +++++++++++++++++++++++++
  7 files changed, 187 insertions(+), 1 deletion(-)

create mode 100644 security/lsm_syscalls.c

arch/x86/entry/syscalls/syscall_64.tbl +1 -0
index c84d12608cd2..56d5c5202fd0 100644
@@ -372,6 +372,7 @@
  448	common	process_mrelease	sys_process_mrelease
  449	common	futex_waitv		sys_futex_waitv
  450	common	set_mempolicy_home_node	sys_set_mempolicy_home_node
+451	common	lsm_self_attr		sys_lsm_self_attr
 
  #
  # Due to a historical design error, certain syscalls are numbered differently
include/linux/syscalls.h +1 -0
index a34b0f9a9972..7f87ef8be546 100644
@@ -1056,6 +1056,7 @@ asmlinkage long sys_memfd_secret(unsigned int flags);
  asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
  					    unsigned long home_node,
  					    unsigned long flags);
+asmlinkage long sys_lsm_self_attr(struct lsm_ctx *ctx, size_t *size, int flags);
 
  /*
   * Architecture-specific system calls
include/uapi/asm-generic/unistd.h +0 -0
index 45fa180cc56a..aa66718e1b48 100644

include/uapi/asm-generic/unistd.h __SYSCALL(__NR_futex_waitv, sys_futex_waitv) · line 893

Quoted 9 lines
include/uapi/asm-generic/unistd.h +4 -1
@@ -886,8 +886,11 @@ __SYSCALL(__NR_futex_waitv, sys_futex_waitv)
  #define __NR_set_mempolicy_home_node 450
  __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
 
+#define __NR_lsm_self_attr 451
+__SYSCALL(__NR_lsm_self_attr, sys_lsm_self_attr)
+
  #undef __NR_syscalls
-#define __NR_syscalls 451
+#define __NR_syscalls 452

This need to move to a dedicated "wire syscall" patch.

Quoted 12 lines
include/uapi/asm-generic/unistd.h +0 -0
  /*
   * 32 bit systems traditionally used different
include/uapi/linux/lsm.h +1 -0
index 4bb692b84a28..5acd791f82a9 100644
@@ -9,6 +9,27 @@
  #ifndef _UAPI_LINUX_LSM_H
  #define _UAPI_LINUX_LSM_H
 
+#include <linux/types.h>

include/uapi/linux/lsm.h line 22

Quoted 10 lines
include/uapi/linux/lsm.h +10 -0
+#include <linux/unistd.h>
+
+/**
+ * struct lsm_ctx - LSM context
+ * @id: the LSM id number, see LSM_ID_XXX
+ * @flags: context specifier and LSM specific flags
+ * @ctx_len: the size of @ctx
+ * @ctx: the LSM context, a nul terminated string
+ *
+ * @ctx in a nul terminated string.

"NULL-terminated"?

include/uapi/linux/lsm.h line 27

Quoted 5 lines
include/uapi/linux/lsm.h +5 -0
+ *	(strlen(@ctx) < @ctx_len) is always true.
+ *	(strlen(@ctx) == @ctx_len + 1) is not guaranteed.
+ */
+struct lsm_ctx {
+	unsigned int		id;

I suggest using __u32 instead of unsigned int.

include/uapi/linux/lsm.h line 28

Quoted 1 line
include/uapi/linux/lsm.h +1 -0
+	unsigned int		flags;

What could be the use case for these flags?

include/uapi/linux/lsm.h line 31

Quoted 3 lines
include/uapi/linux/lsm.h +3 -0
+	__kernel_size_t		ctx_len;
+	unsigned char		ctx[];
+};

To avoid holes in this struct, you might want to use __attribute__((packed)).

Quoted 80 lines
include/uapi/linux/lsm.h +1 -0
+
  /*
   * ID values to identify security modules.
   * A system may use more than one security module.
kernel/sys_ni.c +3 -0
index 860b2dcf3ac4..0fdb0341251d 100644
@@ -262,6 +262,9 @@ COND_SYSCALL_COMPAT(recvmsg);
  /* mm/nommu.c, also with MMU */
  COND_SYSCALL(mremap);
 
+/* security/lsm_syscalls.c */
+COND_SYSCALL(lsm_self_attr);
+
  /* security/keys/keyctl.c */
  COND_SYSCALL(add_key);
  COND_SYSCALL(request_key);
security/Makefile +1 -0
index 18121f8f85cd..59f238490665 100644
@@ -7,6 +7,7 @@ obj-$(CONFIG_KEYS)			+= keys/
 
  # always enable default capabilities
  obj-y					+= commoncap.o
+obj-$(CONFIG_SECURITY) 			+= lsm_syscalls.o
  obj-$(CONFIG_MMU)			+= min_addr.o
 
  # Object file lists
security/lsm_syscalls.c new file +42 -0
new file mode 100644
index 000000000000..da0fab7065e2
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * System calls implementing the Linux Security Module API.
+ *
+ *  Copyright (C) 2022 Casey Schaufler <[email protected]>
+ *  Copyright (C) Intel Corporation
+ */
+
+#include <asm/current.h>
+#include <linux/compiler_types.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/security.h>
+#include <linux/stddef.h>
+#include <linux/syscalls.h>
+#include <linux/types.h>
+#include <linux/lsm_hooks.h>
+#include <uapi/linux/lsm.h>
+
+struct feature_map {
+	char *name;
+	int feature;
+};
+
+static const struct feature_map lsm_attr_names[] = {
+	{ .name = "current",	.feature = LSM_ATTR_CURRENT, },
+	{ .name = "exec",	.feature = LSM_ATTR_EXEC, },
+	{ .name = "fscreate",	.feature = LSM_ATTR_FSCREATE, },
+	{ .name = "keycreate",	.feature = LSM_ATTR_KEYCREATE, },
+	{ .name = "prev",	.feature = LSM_ATTR_PREV, },
+	{ .name = "sockcreate",	.feature = LSM_ATTR_SOCKCREATE, },
+};
+
+/**
+ * lsm_self_attr - Return current task's security module attributes
+ * @ctx: the LSM contexts
+ * @size: size of @ctx, updated on return
+ * @flags: reserved for future use, must be zero
+ *
+ * Returns the calling task's LSM contexts. On success this
+ * function returns the number of @ctx array elements. This value
+ * may be zero if there are no LSM contexts assigned.
Quoted 3 lines

If @size is
+ * insufficient to contain the return data -E2BIG is returned and
+ * @size is set to the minimum required size.

I'd prefer @size to not be a pointer but a value, and then only be read to get the context size.

Because lazy userspace only reading the top
If the ctx buffer is not big enough,

Quoted 2 lines

In all other cases
+ * a negative value indicating the error is returned.

lsm_module_list() already returns the enabled LSM IDs. It would be much simpler to only returns the properties of a specified LSM. The syscall could then look like this:
lsm_get_self_attr(__u32 lsm_id, char *attr, size_t size, __u32 flags)

Quoted 111 lines

+ */

security/lsm_syscalls.c new file +110 -0
+SYSCALL_DEFINE3(lsm_self_attr,
+	       struct lsm_ctx __user *, ctx,
+	       size_t __user *, size,
+	       int, flags)
+{
+	struct lsm_ctx *final = NULL;
+	struct lsm_ctx *interum;
+	struct lsm_ctx *ip;
+	void *curr;
+	char **interum_ctx;
+	char *cp;
+	size_t total_size = 0;
+	int count = 0;
+	int attr;
+	int len;
+	int rc = 0;
+	int i;
+
+	interum = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_id *
+			  sizeof(*interum), GFP_KERNEL);
+	if (interum == NULL)
+		return -ENOMEM;
+	ip = interum;
+
+	interum_ctx = kzalloc(ARRAY_SIZE(lsm_attr_names) * lsm_id *
+			      sizeof(*interum_ctx), GFP_KERNEL);
+	if (interum_ctx == NULL) {
+		kfree(interum);
+		return -ENOMEM;
+	}
+
+	for (attr = 0; attr < ARRAY_SIZE(lsm_attr_names); attr++) {
+		for (i = 0; i < lsm_id; i++) {
+			if ((lsm_idlist[i]->features &
+			     lsm_attr_names[attr].feature) == 0)
+				continue;
+
+			len = security_getprocattr(current, lsm_idlist[i]->id,
+						   lsm_attr_names[attr].name,
+						   &cp);
+			if (len <= 0)
+				continue;
+
+			ip->id = lsm_idlist[i]->id;
+			ip->flags = lsm_attr_names[attr].feature;
+			/* space for terminating \0 is allocated below */
+			ip->ctx_len = len + 1;
+			interum_ctx[count] = cp;
+			/*
+			 * Security modules have been inconsistent about
+			 * including the \0 terminator in the size. The
+			 * context len has been adjusted to ensure there
+			 * is one.
+			 * At least one security module adds a \n at the
+			 * end of a context to make it look nicer. Change
+			 * that to a \0 so that user space doesn't have to
+			 * work around it. Because of this meddling it is
+			 * safe to assume that lsm_ctx.name is terminated
+			 * and that strlen(lsm_ctx.name) < lsm.ctx_len.
+			 */
+			total_size += sizeof(*interum) + ip->ctx_len;
+			cp = strnchr(cp, len, '\n');
+			if (cp != NULL)
+				*cp = '\0';
+			ip++;
+			count++;
+		}
+	}
+
+	if (count == 0)
+		goto free_out;
+
+	final = kzalloc(total_size, GFP_KERNEL);
+	if (final == NULL) {
+		rc = -ENOMEM;
+		goto free_out;
+	}
+
+	curr = final;
+	ip = interum;
+	for (i = 0; i < count; i++) {
+		memcpy(curr, ip, sizeof(*interum));
+		curr += sizeof(*interum);
+		memcpy(curr, interum_ctx[i], ip->ctx_len);
+		curr += ip->ctx_len;
+		ip++;
+	}
+
+	if (get_user(len, size)) {
+		rc = -EFAULT;
+		goto free_out;
+	}
+	if (total_size > len) {
+		rc = -ERANGE;
+		goto free_out;
+	}
+	if (copy_to_user(ctx, final, total_size) != 0 ||
+	    put_user(total_size, size) != 0)
+		rc = -EFAULT;
+	else
+		rc = count;
+
+free_out:
+	for (i = 0; i < count; i++)
+		kfree(interum_ctx[i]);
+	kfree(interum_ctx);
+	kfree(interum);
+	kfree(final);
+	return rc;
+}
maintainer
#26 lore raw

Re: [PATCH v38 06/39] LSM: lsm_self_attr syscall for LSM self attributes

In reply to Casey Schaufler
Quoted 5 lines · Casey Schaufler

Create a system call lsm_self_attr() to provide the security module maintained attributes of the current process. Historically these attributes have been exposed to user space via entries in procfs under /proc/self/attr.

Hi Casey,

I had hoped to get to review these patches earlier this week, I know you are very anxious to see something happen here, but unfortunately that didn't work out and I'm now in a position of limited network access and time for a bit. I will do my best to at least comment on the new syscall related additions, but thankfully you've already started to get some good comments from others so I'm hopeful that will help you keep moving forward.

One comment I did want to make, and it's important: please separate the LSM syscall patches from the LSM stacking patches. While the stacking patches will obviously be dependent on the syscall patches, the syscall patches should not be dependent on stacking. However, the LSM syscall patches must be designed from the start to support multiple, simultaneous LSMs.

Thanks.

Signature · 1 line
paul-moore.com
author maintainer
#27 lore raw

Re: [PATCH v38 06/39] LSM: lsm_self_attr syscall for LSM self attributes

Quoted 7 lines · Paul Moore
Quoted 4 lines · Casey Schaufler

Create a system call lsm_self_attr() to provide the security module maintained attributes of the current process. Historically these attributes have been exposed to user space via entries in procfs under /proc/self/attr.

Hi Casey,

Quoted 7 lines

I had hoped to get to review these patches earlier this week, I know you are very anxious to see something happen here, but unfortunately that didn't work out and I'm now in a position of limited network access and time for a bit. I will do my best to at least comment on the new syscall related additions, but thankfully you've already started to get some good comments from others so I'm hopeful that will help you keep moving forward.

Thanks. I just got back to work myself. Hopefully the comments will prove useful. I'm just getting to them.

Quoted 6 lines

One comment I did want to make, and it's important: please separate the LSM syscall patches from the LSM stacking patches. While the stacking patches will obviously be dependent on the syscall patches, the syscall patches should not be dependent on stacking. However, the LSM syscall patches must be designed from the start to support multiple, simultaneous LSMs.

OK. I will refactor into two patch sets. The first will be the syscalls for getting the LSM attributes and the second will be the stacking changes. The prctl() I proposed to set the "display" LSM will be in the second, as it makes no sense to have without anything to change. I have not to date included the SO_PEERCONTEXT that would be required for complete stacking. Would you like to see that included in the syscall patches?

Quoted 1 line

Thanks.

Thank you.

author maintainer
#28 lore raw

PATCH v38 7/39 integrity: disassociate ima_filter_rule from security_audit_rule

In reply to Casey Schaufler

Create real functions for the ima_filter_rule interfaces. These replace #defines that obscure the reuse of audit interfaces. The new functions are put in security.c because they use security module registered hooks that we don't want exported.

To: Mimi Zohar <[email protected]>
Cc: [email protected]

---
 include/linux/security.h     | 24 ++++++++++++++++++++++++
 security/integrity/ima/ima.h | 26 --------------------------
 security/security.c          | 21 +++++++++++++++++++++
 3 files changed, 45 insertions(+), 26 deletions(-)
include/linux/security.h +24 -0
index c4696f14daac..fe3273a6498f 100644
@@ -1944,6 +1944,30 @@ static inline void security_audit_rule_free(void *lsmrule)
 #endif /* CONFIG_SECURITY */
 #endif /* CONFIG_AUDIT */
 
+#if defined(CONFIG_IMA_LSM_RULES) && defined(CONFIG_SECURITY)
+int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule);
+int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule);
+void ima_filter_rule_free(void *lsmrule);
+
+#else
+
+static inline int ima_filter_rule_init(u32 field, u32 op, char *rulestr,
+					   void **lsmrule)
+{
+	return 0;
+}
+
+static inline int ima_filter_rule_match(u32 secid, u32 field, u32 op,
+					    void *lsmrule)
+{
+	return 0;
+}
+
+static inline void ima_filter_rule_free(void *lsmrule)
+{ }
+
+#endif /* defined(CONFIG_IMA_LSM_RULES) && defined(CONFIG_SECURITY) */
+
 #ifdef CONFIG_SECURITYFS
 
 extern struct dentry *securityfs_create_file(const char *name, umode_t mode,
security/integrity/ima/ima.h +0 -26
index be965a8715e4..1b5d70ac2dc9 100644
@@ -418,32 +418,6 @@ static inline void ima_free_modsig(struct modsig *modsig)
 }
 #endif /* CONFIG_IMA_APPRAISE_MODSIG */
 
-/* LSM based policy rules require audit */
-#ifdef CONFIG_IMA_LSM_RULES
-
-#define ima_filter_rule_init security_audit_rule_init
-#define ima_filter_rule_free security_audit_rule_free
-#define ima_filter_rule_match security_audit_rule_match
-
-#else
-
-static inline int ima_filter_rule_init(u32 field, u32 op, char *rulestr,
-				       void **lsmrule)
-{
-	return -EINVAL;
-}
-
-static inline void ima_filter_rule_free(void *lsmrule)
-{
-}
-
-static inline int ima_filter_rule_match(u32 secid, u32 field, u32 op,
-					void *lsmrule)
-{
-	return -EINVAL;
-}
-#endif /* CONFIG_IMA_LSM_RULES */
-
 #ifdef	CONFIG_IMA_READ_POLICY
 #define	POLICY_FILE_FLAGS	(S_IWUSR | S_IRUSR)
 #else
security/security.c +21 -0
index af62f4c1cc89..b916469388b0 100644
@@ -2603,6 +2603,27 @@ int security_audit_rule_match(u32 secid, u32 field, u32 op, void *lsmrule)
 }
 #endif /* CONFIG_AUDIT */
 
+#ifdef CONFIG_IMA_LSM_RULES
+/*
+ * The integrity subsystem uses the same hooks as
+ * the audit subsystem.
+ */
+int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule)
+{
+	return call_int_hook(audit_rule_init, 0, field, op, rulestr, lsmrule);
+}
+
+void ima_filter_rule_free(void *lsmrule)
+{
+	call_void_hook(audit_rule_free, lsmrule);
+}
+
+int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule)
+{
+	return call_int_hook(audit_rule_match, 0, secid, field, op, lsmrule);
+}
+#endif /* CONFIG_IMA_LSM_RULES */
+
 #ifdef CONFIG_BPF_SYSCALL
 int security_bpf(int cmd, union bpf_attr *attr, unsigned int size)
 {
Signature · 1 line
2.37.3
author maintainer
#29 lore raw

PATCH v38 8/39 LSM: Infrastructure management of the sock security

In reply to Casey Schaufler

Move management of the sock->sk_security blob out of the individual security modules and into the security infrastructure. Instead of allocating the blobs from within the modules the modules tell the infrastructure how much space is required, and the space is allocated there.

---
 include/linux/lsm_hooks.h         |  1 +
 security/apparmor/include/net.h   |  6 ++-
 security/apparmor/lsm.c           | 38 ++++----------
 security/apparmor/net.c           |  2 +-
 security/security.c               | 36 +++++++++++++-
 security/selinux/hooks.c          | 82 +++++++++++++++----------------
 security/selinux/include/objsec.h |  5 ++
 security/selinux/netlabel.c       | 23 ++++-----
 security/smack/smack.h            |  5 ++
 security/smack/smack_lsm.c        | 66 ++++++++++++-------------
 security/smack/smack_netfilter.c  |  4 +-
 11 files changed, 146 insertions(+), 122 deletions(-)
include/linux/lsm_hooks.h +1 -0
index ded76db3f523..b266d0826278 100644
@@ -1625,6 +1625,7 @@ struct lsm_blob_sizes {
 	int	lbs_cred;
 	int	lbs_file;
 	int	lbs_inode;
+	int	lbs_sock;
 	int	lbs_superblock;
 	int	lbs_ipc;
 	int	lbs_msg_msg;
security/apparmor/include/net.h +5 -1
index aadb4b29fb66..fac8999ba7a3 100644
@@ -51,7 +51,11 @@ struct aa_sk_ctx {
 	struct aa_label *peer;
 };
 
-#define SK_CTX(X) ((X)->sk_security)
+static inline struct aa_sk_ctx *aa_sock(const struct sock *sk)
+{
+	return sk->sk_security + apparmor_blob_sizes.lbs_sock;
+}
+
 #define SOCK_ctx(X) SOCK_INODE(X)->i_security
 #define DEFINE_AUDIT_NET(NAME, OP, SK, F, T, P)				  \
 	struct lsm_network_audit NAME ## _net = { .sk = (SK),		  \
security/apparmor/lsm.c +10 -28
index 40266cc4866c..caad42a0c913 100644
@@ -803,33 +803,15 @@ static int apparmor_task_kill(struct task_struct *target, struct kernel_siginfo
 	return error;
 }
 
-/**
- * apparmor_sk_alloc_security - allocate and attach the sk_security field
- */
-static int apparmor_sk_alloc_security(struct sock *sk, int family, gfp_t flags)
-{
-	struct aa_sk_ctx *ctx;
-
-	ctx = kzalloc(sizeof(*ctx), flags);
-	if (!ctx)
-		return -ENOMEM;
-
-	SK_CTX(sk) = ctx;
-
-	return 0;
-}
-
 /**
  * apparmor_sk_free_security - free the sk_security field
  */
 static void apparmor_sk_free_security(struct sock *sk)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
-	SK_CTX(sk) = NULL;
 	aa_put_label(ctx->label);
 	aa_put_label(ctx->peer);
-	kfree(ctx);
 }
 
 /**
@@ -838,8 +820,8 @@ static void apparmor_sk_free_security(struct sock *sk)
 static void apparmor_sk_clone_security(const struct sock *sk,
 				       struct sock *newsk)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
-	struct aa_sk_ctx *new = SK_CTX(newsk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
+	struct aa_sk_ctx *new = aa_sock(newsk);
 
 	if (new->label)
 		aa_put_label(new->label);
@@ -892,7 +874,7 @@ static int apparmor_socket_post_create(struct socket *sock, int family,
 		label = aa_get_current_label();
 
 	if (sock->sk) {
-		struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
+		struct aa_sk_ctx *ctx = aa_sock(sock->sk);
 
 		aa_put_label(ctx->label);
 		ctx->label = aa_get_label(label);
@@ -1077,7 +1059,7 @@ static int apparmor_socket_shutdown(struct socket *sock, int how)
  */
 static int apparmor_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
 	if (!skb->secmark)
 		return 0;
@@ -1090,7 +1072,7 @@ static int apparmor_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 
 static struct aa_label *sk_peer_label(struct sock *sk)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
 	if (ctx->peer)
 		return ctx->peer;
@@ -1174,7 +1156,7 @@ static int apparmor_socket_getpeersec_dgram(struct socket *sock,
  */
 static void apparmor_sock_graft(struct sock *sk, struct socket *parent)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
 	if (!ctx->label)
 		ctx->label = aa_get_current_label();
@@ -1184,7 +1166,7 @@ static void apparmor_sock_graft(struct sock *sk, struct socket *parent)
 static int apparmor_inet_conn_request(const struct sock *sk, struct sk_buff *skb,
 				      struct request_sock *req)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
 	if (!skb->secmark)
 		return 0;
@@ -1201,6 +1183,7 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
 	.lbs_cred = sizeof(struct aa_task_ctx *),
 	.lbs_file = sizeof(struct aa_file_ctx),
 	.lbs_task = sizeof(struct aa_task_ctx),
+	.lbs_sock = sizeof(struct aa_sk_ctx),
 };
 
 static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
@@ -1243,7 +1226,6 @@ static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(getprocattr, apparmor_getprocattr),
 	LSM_HOOK_INIT(setprocattr, apparmor_setprocattr),
 
-	LSM_HOOK_INIT(sk_alloc_security, apparmor_sk_alloc_security),
 	LSM_HOOK_INIT(sk_free_security, apparmor_sk_free_security),
 	LSM_HOOK_INIT(sk_clone_security, apparmor_sk_clone_security),
 
@@ -1809,7 +1791,7 @@ static unsigned int apparmor_ip_postroute(void *priv,
 	if (sk == NULL)
 		return NF_ACCEPT;
 
-	ctx = SK_CTX(sk);
+	ctx = aa_sock(sk);
 	if (!apparmor_secmark_check(ctx->label, OP_SENDMSG, AA_MAY_SEND,
 				    skb->secmark, sk))
 		return NF_ACCEPT;
security/apparmor/net.c +1 -1
index 7efe4d17273d..b336e23a4467 100644
@@ -145,7 +145,7 @@ int aa_af_perm(struct aa_label *label, const char *op, u32 request, u16 family,
 static int aa_label_sk_perm(struct aa_label *label, const char *op, u32 request,
 			    struct sock *sk)
 {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 	int error = 0;
 
 	AA_BUG(!label);
security/security.c +35 -1
index b916469388b0..7a604a74716a 100644
@@ -30,6 +30,7 @@
 #include <linux/msg.h>
 #include <uapi/linux/lsm.h>
 #include <net/flow.h>
+#include <net/sock.h>
 
 #define MAX_LSM_EVM_XATTR	2
 
@@ -207,6 +208,7 @@ static void __init lsm_set_blob_sizes(struct lsm_blob_sizes *needed)
 	lsm_set_blob_size(&needed->lbs_inode, &blob_sizes.lbs_inode);
 	lsm_set_blob_size(&needed->lbs_ipc, &blob_sizes.lbs_ipc);
 	lsm_set_blob_size(&needed->lbs_msg_msg, &blob_sizes.lbs_msg_msg);
+	lsm_set_blob_size(&needed->lbs_sock, &blob_sizes.lbs_sock);
 	lsm_set_blob_size(&needed->lbs_superblock, &blob_sizes.lbs_superblock);
 	lsm_set_blob_size(&needed->lbs_task, &blob_sizes.lbs_task);
 }
@@ -349,6 +351,7 @@ static void __init ordered_lsm_init(void)
 	init_debug("inode blob size      = %d\n", blob_sizes.lbs_inode);
 	init_debug("ipc blob size        = %d\n", blob_sizes.lbs_ipc);
 	init_debug("msg_msg blob size    = %d\n", blob_sizes.lbs_msg_msg);
+	init_debug("sock blob size       = %d\n", blob_sizes.lbs_sock);
 	init_debug("superblock blob size = %d\n", blob_sizes.lbs_superblock);
 	init_debug("task blob size       = %d\n", blob_sizes.lbs_task);
 
@@ -678,6 +681,28 @@ static int lsm_msg_msg_alloc(struct msg_msg *mp)
 	return 0;
 }
 
+/**
+ * lsm_sock_alloc - allocate a composite sock blob
+ * @sock: the sock that needs a blob
+ * @priority: allocation mode
+ *
+ * Allocate the sock blob for all the modules
+ *
+ * Returns 0, or -ENOMEM if memory can't be allocated.
+ */
+static int lsm_sock_alloc(struct sock *sock, gfp_t priority)
+{
+	if (blob_sizes.lbs_sock == 0) {
+		sock->sk_security = NULL;
+		return 0;
+	}
+
+	sock->sk_security = kzalloc(blob_sizes.lbs_sock, priority);
+	if (sock->sk_security == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
 /**
  * lsm_early_task - during initialization allocate a composite task blob
  * @task: the task that needs a blob
@@ -2293,12 +2318,21 @@ EXPORT_SYMBOL(security_socket_getpeersec_dgram);
 
 int security_sk_alloc(struct sock *sk, int family, gfp_t priority)
 {
-	return call_int_hook(sk_alloc_security, 0, sk, family, priority);
+	int rc = lsm_sock_alloc(sk, priority);
+
+	if (unlikely(rc))
+		return rc;
+	rc = call_int_hook(sk_alloc_security, 0, sk, family, priority);
+	if (unlikely(rc))
+		security_sk_free(sk);
+	return rc;
 }
 
 void security_sk_free(struct sock *sk)
 {
 	call_void_hook(sk_free_security, sk);
+	kfree(sk->sk_security);
+	sk->sk_security = NULL;
 }
 
 void security_sk_clone(const struct sock *sk, struct sock *newsk)
security/selinux/hooks.c +39 -43

265 lines not on this page · raw message

security/selinux/include/objsec.h +5 -0
index 2953132408bf..007d1ae7ee27 100644
@@ -194,4 +194,9 @@ static inline struct superblock_security_struct *selinux_superblock(
 	return superblock->s_security + selinux_blob_sizes.lbs_superblock;
 }
 
+static inline struct sk_security_struct *selinux_sock(const struct sock *sock)
+{
+	return sock->sk_security + selinux_blob_sizes.lbs_sock;
+}
+
 #endif /* _SELINUX_OBJSEC_H_ */
security/selinux/netlabel.c +12 -11
index 1321f15799e2..800ab4b4239e 100644
@@ -17,6 +17,7 @@
 #include <linux/gfp.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
+#include <linux/lsm_hooks.h>
 #include <net/sock.h>
 #include <net/netlabel.h>
 #include <net/ip.h>
@@ -68,7 +69,7 @@ static int selinux_netlbl_sidlookup_cached(struct sk_buff *skb,
 static struct netlbl_lsm_secattr *selinux_netlbl_sock_genattr(struct sock *sk)
 {
 	int rc;
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 	struct netlbl_lsm_secattr *secattr;
 
 	if (sksec->nlbl_secattr != NULL)
@@ -101,7 +102,7 @@ static struct netlbl_lsm_secattr *selinux_netlbl_sock_getattr(
 							const struct sock *sk,
 							u32 sid)
 {
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 	struct netlbl_lsm_secattr *secattr = sksec->nlbl_secattr;
 
 	if (secattr == NULL)
@@ -236,7 +237,7 @@ int selinux_netlbl_skbuff_setsid(struct sk_buff *skb,
 	 * being labeled by it's parent socket, if it is just exit */
 	sk = skb_to_full_sk(skb);
 	if (sk != NULL) {
-		struct sk_security_struct *sksec = sk->sk_security;
+		struct sk_security_struct *sksec = selinux_sock(sk);
 
 		if (sksec->nlbl_state != NLBL_REQSKB)
 			return 0;
@@ -274,7 +275,7 @@ int selinux_netlbl_sctp_assoc_request(struct sctp_association *asoc,
 {
 	int rc;
 	struct netlbl_lsm_secattr secattr;
-	struct sk_security_struct *sksec = asoc->base.sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(asoc->base.sk);
 	struct sockaddr_in addr4;
 	struct sockaddr_in6 addr6;
 
@@ -355,7 +356,7 @@ int selinux_netlbl_inet_conn_request(struct request_sock *req, u16 family)
  */
 void selinux_netlbl_inet_csk_clone(struct sock *sk, u16 family)
 {
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 
 	if (family == PF_INET)
 		sksec->nlbl_state = NLBL_LABELED;
@@ -373,8 +374,8 @@ void selinux_netlbl_inet_csk_clone(struct sock *sk, u16 family)
  */
 void selinux_netlbl_sctp_sk_clone(struct sock *sk, struct sock *newsk)
 {
-	struct sk_security_struct *sksec = sk->sk_security;
-	struct sk_security_struct *newsksec = newsk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
+	struct sk_security_struct *newsksec = selinux_sock(newsk);
 
 	newsksec->nlbl_state = sksec->nlbl_state;
 }
@@ -392,7 +393,7 @@ void selinux_netlbl_sctp_sk_clone(struct sock *sk, struct sock *newsk)
 int selinux_netlbl_socket_post_create(struct sock *sk, u16 family)
 {
 	int rc;
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 	struct netlbl_lsm_secattr *secattr;
 
 	if (family != PF_INET && family != PF_INET6)
@@ -507,7 +508,7 @@ int selinux_netlbl_socket_setsockopt(struct socket *sock,
 {
 	int rc = 0;
 	struct sock *sk = sock->sk;
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 	struct netlbl_lsm_secattr secattr;
 
 	if (selinux_netlbl_option(level, optname) &&
@@ -545,7 +546,7 @@ static int selinux_netlbl_socket_connect_helper(struct sock *sk,
 						struct sockaddr *addr)
 {
 	int rc;
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 	struct netlbl_lsm_secattr *secattr;
 
 	/* connected sockets are allowed to disconnect when the address family
@@ -584,7 +585,7 @@ static int selinux_netlbl_socket_connect_helper(struct sock *sk,
 int selinux_netlbl_socket_connect_locked(struct sock *sk,
 					 struct sockaddr *addr)
 {
-	struct sk_security_struct *sksec = sk->sk_security;
+	struct sk_security_struct *sksec = selinux_sock(sk);
 
 	if (sksec->nlbl_state != NLBL_REQSKB &&
 	    sksec->nlbl_state != NLBL_CONNLABELED)
security/smack/smack.h +5 -0
index fc837dcebf96..ef9d0b7b1954 100644
@@ -363,6 +363,11 @@ static inline struct superblock_smack *smack_superblock(
 	return superblock->s_security + smack_blob_sizes.lbs_superblock;
 }
 
+static inline struct socket_smack *smack_sock(const struct sock *sock)
+{
+	return sock->sk_security + smack_blob_sizes.lbs_sock;
+}
+
 /*
  * Is the directory transmuting?
  */
security/smack/smack_lsm.c +31 -35

233 lines not on this page · raw message

security/smack/smack_netfilter.c +2 -2
index b945c1d3a743..bad71b7e648d 100644
@@ -26,8 +26,8 @@ static unsigned int smack_ip_output(void *priv,
 	struct socket_smack *ssp;
 	struct smack_known *skp;
 
-	if (sk && sk->sk_security) {
-		ssp = sk->sk_security;
+	if (sk) {
+		ssp = smack_sock(sk);
 		skp = ssp->smk_out;
 		skb->secmark = skp->smk_secid;
 	}
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
maintainer
#30 lore raw

Re: [PATCH v38 08/39] LSM: Infrastructure management of the sock security

Quoted 219 lines · Casey Schaufler

Move management of the sock->sk_security blob out of the individual security modules and into the security infrastructure. Instead of allocating the blobs from within the modules the modules tell the infrastructure how much space is required, and the space is allocated there.

---
  include/linux/lsm_hooks.h         |  1 +
  security/apparmor/include/net.h   |  6 ++-
  security/apparmor/lsm.c           | 38 ++++----------
  security/apparmor/net.c           |  2 +-
  security/security.c               | 36 +++++++++++++-
  security/selinux/hooks.c          | 82 +++++++++++++++----------------
  security/selinux/include/objsec.h |  5 ++
  security/selinux/netlabel.c       | 23 ++++-----
  security/smack/smack.h            |  5 ++
  security/smack/smack_lsm.c        | 66 ++++++++++++-------------
  security/smack/smack_netfilter.c  |  4 +-
  11 files changed, 146 insertions(+), 122 deletions(-)
include/linux/lsm_hooks.h +1 -0
index ded76db3f523..b266d0826278 100644
@@ -1625,6 +1625,7 @@ struct lsm_blob_sizes {
  	int	lbs_cred;
  	int	lbs_file;
  	int	lbs_inode;
+	int	lbs_sock;
  	int	lbs_superblock;
  	int	lbs_ipc;
  	int	lbs_msg_msg;
security/apparmor/include/net.h +5 -1
index aadb4b29fb66..fac8999ba7a3 100644
@@ -51,7 +51,11 @@ struct aa_sk_ctx {
  	struct aa_label *peer;
  };
 
-#define SK_CTX(X) ((X)->sk_security)
+static inline struct aa_sk_ctx *aa_sock(const struct sock *sk)
+{
+	return sk->sk_security + apparmor_blob_sizes.lbs_sock;
+}
+
  #define SOCK_ctx(X) SOCK_INODE(X)->i_security
  #define DEFINE_AUDIT_NET(NAME, OP, SK, F, T, P)				  \
  	struct lsm_network_audit NAME ## _net = { .sk = (SK),		  \
security/apparmor/lsm.c +10 -28
index 40266cc4866c..caad42a0c913 100644
@@ -803,33 +803,15 @@ static int apparmor_task_kill(struct task_struct *target, struct kernel_siginfo
  	return error;
  }
 
-/**
- * apparmor_sk_alloc_security - allocate and attach the sk_security field
- */
-static int apparmor_sk_alloc_security(struct sock *sk, int family, gfp_t flags)
-{
-	struct aa_sk_ctx *ctx;
-
-	ctx = kzalloc(sizeof(*ctx), flags);
-	if (!ctx)
-		return -ENOMEM;
-
-	SK_CTX(sk) = ctx;
-
-	return 0;
-}
-
  /**
   * apparmor_sk_free_security - free the sk_security field
   */
  static void apparmor_sk_free_security(struct sock *sk)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
-	SK_CTX(sk) = NULL;
  	aa_put_label(ctx->label);
  	aa_put_label(ctx->peer);
-	kfree(ctx);
  }
 
  /**
@@ -838,8 +820,8 @@ static void apparmor_sk_free_security(struct sock *sk)
  static void apparmor_sk_clone_security(const struct sock *sk,
  				       struct sock *newsk)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
-	struct aa_sk_ctx *new = SK_CTX(newsk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
+	struct aa_sk_ctx *new = aa_sock(newsk);
 
  	if (new->label)
  		aa_put_label(new->label);
@@ -892,7 +874,7 @@ static int apparmor_socket_post_create(struct socket *sock, int family,
  		label = aa_get_current_label();
 
  	if (sock->sk) {
-		struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
+		struct aa_sk_ctx *ctx = aa_sock(sock->sk);
 
  		aa_put_label(ctx->label);
  		ctx->label = aa_get_label(label);
@@ -1077,7 +1059,7 @@ static int apparmor_socket_shutdown(struct socket *sock, int how)
   */
  static int apparmor_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
  	if (!skb->secmark)
  		return 0;
@@ -1090,7 +1072,7 @@ static int apparmor_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 
  static struct aa_label *sk_peer_label(struct sock *sk)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
  	if (ctx->peer)
  		return ctx->peer;
@@ -1174,7 +1156,7 @@ static int apparmor_socket_getpeersec_dgram(struct socket *sock,
   */
  static void apparmor_sock_graft(struct sock *sk, struct socket *parent)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
  	if (!ctx->label)
  		ctx->label = aa_get_current_label();
@@ -1184,7 +1166,7 @@ static void apparmor_sock_graft(struct sock *sk, struct socket *parent)
  static int apparmor_inet_conn_request(const struct sock *sk, struct sk_buff *skb,
  				      struct request_sock *req)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
 
  	if (!skb->secmark)
  		return 0;
@@ -1201,6 +1183,7 @@ struct lsm_blob_sizes apparmor_blob_sizes __lsm_ro_after_init = {
  	.lbs_cred = sizeof(struct aa_task_ctx *),
  	.lbs_file = sizeof(struct aa_file_ctx),
  	.lbs_task = sizeof(struct aa_task_ctx),
+	.lbs_sock = sizeof(struct aa_sk_ctx),
  };
 
  static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
@@ -1243,7 +1226,6 @@ static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
  	LSM_HOOK_INIT(getprocattr, apparmor_getprocattr),
  	LSM_HOOK_INIT(setprocattr, apparmor_setprocattr),
 
-	LSM_HOOK_INIT(sk_alloc_security, apparmor_sk_alloc_security),
  	LSM_HOOK_INIT(sk_free_security, apparmor_sk_free_security),
  	LSM_HOOK_INIT(sk_clone_security, apparmor_sk_clone_security),
 
@@ -1809,7 +1791,7 @@ static unsigned int apparmor_ip_postroute(void *priv,
  	if (sk == NULL)
  		return NF_ACCEPT;
 
-	ctx = SK_CTX(sk);
+	ctx = aa_sock(sk);
  	if (!apparmor_secmark_check(ctx->label, OP_SENDMSG, AA_MAY_SEND,
  				    skb->secmark, sk))
  		return NF_ACCEPT;
security/apparmor/net.c +1 -1
index 7efe4d17273d..b336e23a4467 100644
@@ -145,7 +145,7 @@ int aa_af_perm(struct aa_label *label, const char *op, u32 request, u16 family,
  static int aa_label_sk_perm(struct aa_label *label, const char *op, u32 request,
  			    struct sock *sk)
  {
-	struct aa_sk_ctx *ctx = SK_CTX(sk);
+	struct aa_sk_ctx *ctx = aa_sock(sk);
  	int error = 0;
 
  	AA_BUG(!label);
security/security.c +3 -0
index b916469388b0..7a604a74716a 100644
@@ -30,6 +30,7 @@
  #include <linux/msg.h>
  #include <uapi/linux/lsm.h>
  #include <net/flow.h>
+#include <net/sock.h>
 
  #define MAX_LSM_EVM_XATTR	2
 
@@ -207,6 +208,7 @@ static void __init lsm_set_blob_sizes(struct lsm_blob_sizes *needed)
  	lsm_set_blob_size(&needed->lbs_inode, &blob_sizes.lbs_inode);
  	lsm_set_blob_size(&needed->lbs_ipc, &blob_sizes.lbs_ipc);
  	lsm_set_blob_size(&needed->lbs_msg_msg, &blob_sizes.lbs_msg_msg);
+	lsm_set_blob_size(&needed->lbs_sock, &blob_sizes.lbs_sock);
  	lsm_set_blob_size(&needed->lbs_superblock, &blob_sizes.lbs_superblock);
  	lsm_set_blob_size(&needed->lbs_task, &blob_sizes.lbs_task);
  }
@@ -349,6 +351,7 @@ static void __init ordered_lsm_init(void)
  	init_debug("inode blob size      = %d\n", blob_sizes.lbs_inode);
  	init_debug("ipc blob size        = %d\n", blob_sizes.lbs_ipc);
  	init_debug("msg_msg blob size    = %d\n", blob_sizes.lbs_msg_msg);
+	init_debug("sock blob size       = %d\n", blob_sizes.lbs_sock);
  	init_debug("superblock blob size = %d\n", blob_sizes.lbs_superblock);
  	init_debug("task blob size       = %d\n", blob_sizes.lbs_task);
 
@@ -678,6 +681,28 @@ static int lsm_msg_msg_alloc(struct msg_msg *mp)
  	return 0;
  }
 

security/security.c static int lsm_msg_msg_alloc(struct msg_msg *mp) · line 693

Quoted 10 lines
security/security.c +10 -0
+/**
+ * lsm_sock_alloc - allocate a composite sock blob
+ * @sock: the sock that needs a blob
+ * @priority: allocation mode
+ *
+ * Allocate the sock blob for all the modules
+ *
+ * Returns 0, or -ENOMEM if memory can't be allocated.
+ */
+static int lsm_sock_alloc(struct sock *sock, gfp_t priority)

This is not used (and throw a warning) if CONFIG_SECURITY_NETWORK is not defined.

author maintainer
#31 lore raw

PATCH v38 9/39 LSM: Add the lsmblob data structure.

In reply to Casey Schaufler

When more than one security module is exporting data to audit and networking sub-systems a single 32 bit integer is no longer sufficient to represent the data. Add a structure to be used instead.

The lsmblob structure is currently an array of u32 "secids". There is an entry for each of the security modules built into the system that would use secids if active. The system assigns the module a "slot" when it registers hooks. If modules are compiled in but not registered there will be unused slots. The slot number is added to the lsm_id structure.

The audit rules data is expanded to use an array of security module data rather than a single instance. A new structure audit_lsm_rules is defined to avoid the confusion which commonly accompanies the use of void ** parameters.

---
 include/linux/audit.h        |  9 ++++-
 include/linux/lsm_hooks.h    |  1 +
 include/linux/security.h     | 75 +++++++++++++++++++++++++++++++++---
 kernel/auditfilter.c         | 23 +++++------
 kernel/auditsc.c             | 17 ++++----
 security/apparmor/lsm.c      |  1 +
 security/bpf/hooks.c         |  1 +
 security/commoncap.c         |  1 +
 security/landlock/setup.c    |  1 +
 security/loadpin/loadpin.c   |  1 +
 security/lockdown/lockdown.c |  1 +
 security/safesetid/lsm.c     |  1 +
 security/security.c          | 70 ++++++++++++++++++++++++++++++---
 security/selinux/hooks.c     |  1 +
 security/smack/smack_lsm.c   |  1 +
 security/tomoyo/tomoyo.c     |  1 +
 security/yama/yama_lsm.c     |  1 +
 17 files changed, 171 insertions(+), 35 deletions(-)
include/linux/audit.h +7 -2
index 3608992848d3..edb919722448 100644
@@ -11,6 +11,7 @@
 
 #include <linux/sched.h>
 #include <linux/ptrace.h>
+#include <linux/security.h>
 #include <linux/audit_arch.h>
 #include <uapi/linux/audit.h>
 #include <uapi/linux/netfilter/nf_tables.h>
@@ -59,6 +60,10 @@ struct audit_krule {
 /* Flag to indicate legacy AUDIT_LOGINUID unset usage */
 #define AUDIT_LOGINUID_LEGACY		0x1
 
+struct audit_lsm_rules {
+	void	*rule[LSMBLOB_ENTRIES];
+};
+
 struct audit_field {
 	u32				type;
 	union {
@@ -66,8 +71,8 @@ struct audit_field {
 		kuid_t			uid;
 		kgid_t			gid;
 		struct {
-			char		*lsm_str;
-			void		*lsm_rule;
+			char			*lsm_str;
+			struct audit_lsm_rules	lsm_rules;
 		};
 	};
 	u32				op;
include/linux/lsm_hooks.h +1 -0
index b266d0826278..db251a51d4cb 100644
@@ -1605,6 +1605,7 @@ struct lsm_id {
 	const char	*lsm;		/* Name of the LSM */
 	int		id;		/* LSM ID */
 	int		features;	/* Set of LSM features */
+	int		slot;		/* Slot in lsmblob if allocated */
 };
 
 /*
include/linux/security.h +69 -6

108 lines not on this page · raw message

kernel/auditfilter.c +12 -11
index 42d99896e7a6..de75bd6ad866 100644
@@ -76,7 +76,7 @@ static void audit_free_lsm_field(struct audit_field *f)
 	case AUDIT_OBJ_LEV_LOW:
 	case AUDIT_OBJ_LEV_HIGH:
 		kfree(f->lsm_str);
-		security_audit_rule_free(f->lsm_rule);
+		security_audit_rule_free(&f->lsm_rules);
 	}
 }
 
@@ -529,7 +529,7 @@ static struct audit_entry *audit_data_to_entry(struct audit_rule_data *data,
 			entry->rule.buflen += f_val;
 			f->lsm_str = str;
 			err = security_audit_rule_init(f->type, f->op, str,
-						       (void **)&f->lsm_rule);
+						       &f->lsm_rules);
 			/* Keep currently invalid fields around in case they
 			 * become valid after a policy reload. */
 			if (err == -EINVAL) {
@@ -782,7 +782,7 @@ static int audit_compare_rule(struct audit_krule *a, struct audit_krule *b)
 	return 0;
 }
 
-/* Duplicate LSM field information.  The lsm_rule is opaque, so must be
+/* Duplicate LSM field information.  The lsm_rules is opaque, so must be
  * re-initialized. */
 static inline int audit_dupe_lsm_field(struct audit_field *df,
 					   struct audit_field *sf)
@@ -796,9 +796,9 @@ static inline int audit_dupe_lsm_field(struct audit_field *df,
 		return -ENOMEM;
 	df->lsm_str = lsm_str;
 
-	/* our own (refreshed) copy of lsm_rule */
+	/* our own (refreshed) copy of lsm_rules */
 	ret = security_audit_rule_init(df->type, df->op, df->lsm_str,
-				       (void **)&df->lsm_rule);
+				       &df->lsm_rules);
 	/* Keep currently invalid fields around in case they
 	 * become valid after a policy reload. */
 	if (ret == -EINVAL) {
@@ -850,7 +850,7 @@ struct audit_entry *audit_dupe_rule(struct audit_krule *old)
 	new->tree = old->tree;
 	memcpy(new->fields, old->fields, sizeof(struct audit_field) * fcount);
 
-	/* deep copy this information, updating the lsm_rule fields, because
+	/* deep copy this information, updating the lsm_rules fields, because
 	 * the originals will all be freed when the old rule is freed. */
 	for (i = 0; i < fcount; i++) {
 		switch (new->fields[i].type) {
@@ -1367,10 +1367,11 @@ int audit_filter(int msgtype, unsigned int listtype)
 			case AUDIT_SUBJ_TYPE:
 			case AUDIT_SUBJ_SEN:
 			case AUDIT_SUBJ_CLR:
-				if (f->lsm_rule) {
+				if (f->lsm_str) {
 					security_current_getsecid_subj(&sid);
 					result = security_audit_rule_match(sid,
-						   f->type, f->op, f->lsm_rule);
+						   f->type, f->op,
+						   &f->lsm_rules);
 				}
 				break;
 			case AUDIT_EXE:
@@ -1397,7 +1398,7 @@ int audit_filter(int msgtype, unsigned int listtype)
 	return ret;
 }
 
-static int update_lsm_rule(struct audit_krule *r)
+static int update_lsm_rules(struct audit_krule *r)
 {
 	struct audit_entry *entry = container_of(r, struct audit_entry, rule);
 	struct audit_entry *nentry;
@@ -1429,7 +1430,7 @@ static int update_lsm_rule(struct audit_krule *r)
 	return err;
 }
 
-/* This function will re-initialize the lsm_rule field of all applicable rules.
+/* This function will re-initialize the lsm_rules field of all applicable rules.
  * It will traverse the filter lists serarching for rules that contain LSM
  * specific filter fields.  When such a rule is found, it is copied, the
  * LSM field is re-initialized, and the old rule is replaced with the
@@ -1444,7 +1445,7 @@ int audit_update_lsm_rules(void)
 
 	for (i = 0; i < AUDIT_NR_FILTERS; i++) {
 		list_for_each_entry_safe(r, n, &audit_rules_list[i], list) {
-			int res = update_lsm_rule(r);
+			int res = update_lsm_rules(r);
 			if (!err)
 				err = res;
 		}
kernel/auditsc.c +7 -10
index 79a5da1bc5bb..482805f6ea68 100644
@@ -664,7 +664,7 @@ static int audit_filter_rules(struct task_struct *tsk,
 			   match for now to avoid losing information that
 			   may be wanted.   An error message will also be
 			   logged upon error */
-			if (f->lsm_rule) {
+			if (f->lsm_str) {
 				if (need_sid) {
 					/* @tsk should always be equal to
 					 * @current with the exception of
@@ -679,8 +679,7 @@ static int audit_filter_rules(struct task_struct *tsk,
 					need_sid = 0;
 				}
 				result = security_audit_rule_match(sid, f->type,
-								   f->op,
-								   f->lsm_rule);
+							f->op, &f->lsm_rules);
 			}
 			break;
 		case AUDIT_OBJ_USER:
@@ -690,21 +689,19 @@ static int audit_filter_rules(struct task_struct *tsk,
 		case AUDIT_OBJ_LEV_HIGH:
 			/* The above note for AUDIT_SUBJ_USER...AUDIT_SUBJ_CLR
 			   also applies here */
-			if (f->lsm_rule) {
+			if (f->lsm_str) {
 				/* Find files that match */
 				if (name) {
 					result = security_audit_rule_match(
 								name->osid,
 								f->type,
 								f->op,
-								f->lsm_rule);
+								&f->lsm_rules);
 				} else if (ctx) {
 					list_for_each_entry(n, &ctx->names_list, list) {
 						if (security_audit_rule_match(
-								n->osid,
-								f->type,
-								f->op,
-								f->lsm_rule)) {
+							n->osid, f->type, f->op,
+							&f->lsm_rules)) {
 							++result;
 							break;
 						}
@@ -715,7 +712,7 @@ static int audit_filter_rules(struct task_struct *tsk,
 					break;
 				if (security_audit_rule_match(ctx->ipc.osid,
 							      f->type, f->op,
-							      f->lsm_rule))
+							      &f->lsm_rules))
 					++result;
 			}
 			break;
security/apparmor/lsm.c +1 -0
index caad42a0c913..25423a3aa572 100644
@@ -1190,6 +1190,7 @@ static struct lsm_id apparmor_lsmid __lsm_ro_after_init = {
 	.lsm      = "apparmor",
 	.id       = LSM_ID_APPARMOR,
 	.features = LSM_ATTR_CURRENT | LSM_ATTR_PREV | LSM_ATTR_EXEC,
+	.slot     = LSMBLOB_NEEDED,
 };
 
 static struct security_hook_list apparmor_hooks[] __lsm_ro_after_init = {
security/bpf/hooks.c +1 -0
index c462fc41dd57..d92a21ca3d1b 100644
@@ -23,6 +23,7 @@ static struct security_hook_list bpf_lsm_hooks[] __lsm_ro_after_init = {
 struct lsm_id bpf_lsmid __lsm_ro_after_init = {
 	.lsm      = "bpf",
 	.id       = LSM_ID_BPF,
+	.slot     = LSMBLOB_NEEDED,
 };
 
 static int __init bpf_lsm_init(void)
security/commoncap.c +1 -0
index 4e9b140159d8..29c7642a9fb5 100644
@@ -1450,6 +1450,7 @@ int cap_mmap_file(struct file *file, unsigned long reqprot,
 static struct lsm_id capability_lsmid __lsm_ro_after_init = {
 	.lsm      = "capability",
 	.id       = LSM_ID_CAPABILITY,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 static struct security_hook_list capability_hooks[] __lsm_ro_after_init = {
security/landlock/setup.c +1 -0
index 1242c61c9de4..adbe941370f3 100644
@@ -27,6 +27,7 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
 struct lsm_id landlock_lsmid __lsm_ro_after_init = {
 	.lsm      = LANDLOCK_NAME,
 	.id       = LSM_ID_LANDLOCK,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 static int __init landlock_init(void)
security/loadpin/loadpin.c +1 -0
index 276c8a7cd6fe..c3f5678b92c4 100644
@@ -199,6 +199,7 @@ static int loadpin_load_data(enum kernel_load_data_id id, bool contents)
 static struct lsm_id loadpin_lsmid __lsm_ro_after_init = {
 	.lsm      = "loadpin",
 	.id       = LSM_ID_LOADPIN,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 static struct security_hook_list loadpin_hooks[] __lsm_ro_after_init = {
security/lockdown/lockdown.c +1 -0
index 3d3347f3dbd1..1f87e8d43387 100644
@@ -79,6 +79,7 @@ static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
 static struct lsm_id lockdown_lsmid __lsm_ro_after_init = {
 	.lsm      = "lockdown",
 	.id       = LSM_ID_LOCKDOWN,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 static int __init lockdown_lsm_init(void)
security/safesetid/lsm.c +1 -0
index 88002731e603..bddf9a28c270 100644
@@ -265,6 +265,7 @@ static int safesetid_task_fix_setgroups(struct cred *new, const struct cred *old
 static struct lsm_id safesetid_lsmid __lsm_ro_after_init = {
 	.lsm      = "safesetid",
 	.id       = LSM_ID_SAFESETID,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 static struct security_hook_list safesetid_security_hooks[] = {
security/security.c +64 -6

111 lines not on this page · raw message

security/selinux/hooks.c +1 -0
index 25cc17bdd33c..cf89ccaa018d 100644
@@ -7014,6 +7014,7 @@ static struct lsm_id selinux_lsmid __lsm_ro_after_init = {
 	.id       = LSM_ID_SELINUX,
 	.features = LSM_ATTR_CURRENT | LSM_ATTR_EXEC | LSM_ATTR_FSCREATE |
 		    LSM_ATTR_KEYCREATE | LSM_ATTR_PREV | LSM_ATTR_SOCKCREATE,
+	.slot     = LSMBLOB_NEEDED,
 };
 
 /*
security/smack/smack_lsm.c +1 -0
index c399ed799ceb..fbcf20ef1394 100644
@@ -4773,6 +4773,7 @@ static struct lsm_id smack_lsmid __lsm_ro_after_init = {
 	.lsm      = "smack",
 	.id       = LSM_ID_SMACK,
 	.features = LSM_ATTR_CURRENT,
+	.slot     = LSMBLOB_NEEDED,
 };
 
 static struct security_hook_list smack_hooks[] __lsm_ro_after_init = {
security/tomoyo/tomoyo.c +1 -0
index 71eab206ba6e..78b11332eb5b 100644
@@ -534,6 +534,7 @@ static void tomoyo_task_free(struct task_struct *task)
 static struct lsm_id tomoyo_lsmid __lsm_ro_after_init = {
 	.lsm      = "tomoyo",
 	.id       = LSM_ID_TOMOYO,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 /*
security/yama/yama_lsm.c +1 -0
index b178d74bb00b..e11dd71553f4 100644
@@ -425,6 +425,7 @@ static int yama_ptrace_traceme(struct task_struct *parent)
 static struct lsm_id yama_lsmid __lsm_ro_after_init = {
 	.lsm      = "yama",
 	.id       = LSM_ID_YAMA,
+	.slot     = LSMBLOB_NOT_NEEDED,
 };
 
 static struct security_hook_list yama_hooks[] __lsm_ro_after_init = {
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
maintainer
#32 lore raw

Re: [PATCH v38 09/39] LSM: Add the lsmblob data structure.

Quoted 21 lines · Casey Schaufler

When more than one security module is exporting data to audit and networking sub-systems a single 32 bit integer is no longer sufficient to represent the data. Add a structure to be used instead.

The lsmblob structure is currently an array of u32 "secids". There is an entry for each of the security modules built into the system that would use secids if active. The system assigns the module a "slot" when it registers hooks. If modules are compiled in but not registered there will be unused slots. The slot number is added to the lsm_id structure.

The audit rules data is expanded to use an array of security module data rather than a single instance. A new structure audit_lsm_rules is defined to avoid the confusion which commonly accompanies the use of void ** parameters.

---

[...]

security/landlock/setup.c struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = { · line 30

Quoted 9 lines
security/landlock/setup.c +1 -0
index 1242c61c9de4..adbe941370f3 100644
@@ -27,6 +27,7 @@ struct lsm_blob_sizes landlock_blob_sizes __lsm_ro_after_init = {
  struct lsm_id landlock_lsmid __lsm_ro_after_init = {
  	.lsm      = LANDLOCK_NAME,
  	.id       = LSM_ID_LANDLOCK,
+	.slot     = LSMBLOB_NOT_NEEDED,

Please only use one space after ".slot"

author maintainer
#33 lore raw

PATCH v38 10/39 LSM: provide lsm name and id slot mappings

In reply to Casey Schaufler

Provide interfaces to map LSM slot numbers and LSM names. Update the LSM registration code to save this information.

---
 include/linux/security.h |  4 ++++
 security/security.c      | 45 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
include/linux/security.h +4 -0
index c1f8b33e7c27..0f0fb2077f41 100644
@@ -214,6 +214,10 @@ static inline bool lsmblob_equal(const struct lsmblob *bloba,
 	return !memcmp(bloba, blobb, sizeof(*bloba));
 }
 
+/* Map lsm names to blob slot numbers */
+extern int lsm_name_to_slot(char *name);
+extern const char *lsm_slot_to_name(int slot);
+
 /* These functions are in security/commoncap.c */
 extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
 		       int cap, unsigned int opts);
security/security.c +45 -0

57 lines not on this page · raw message

Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#34 lore raw

PATCH v38 11/39 IMA: avoid label collisions with stacked LSMs

In reply to Casey Schaufler

Integrity measurement may filter on security module information and needs to be clear in the case of multiple active security modules which applies. Provide a boot option ima_rules_lsm= to allow the user to specify an active security module to apply filters to. If not specified, use the first registered module that supports the audit_rule_match() LSM hook. Allow the user to specify in the IMA policy an lsm= option to specify the security module to use for a particular rule.

To: Mimi Zohar <[email protected]>
To: [email protected]

---
 Documentation/ABI/testing/ima_policy |  8 +++-
 include/linux/security.h             | 14 +++---
 security/integrity/ima/ima_policy.c  | 70 +++++++++++++++++++++++++---
 security/security.c                  | 35 +++++++++++---
 4 files changed, 108 insertions(+), 19 deletions(-)
Documentation/ABI/testing/ima_policy +7 -1
index db17fc8a0c9f..bac75acc24ba 100644
@@ -26,7 +26,7 @@ Description:
 				[uid=] [euid=] [gid=] [egid=]
 				[fowner=] [fgroup=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
-				 [obj_user=] [obj_role=] [obj_type=]]
+				 [obj_user=] [obj_role=] [obj_type=] [lsm=]]
 			option:	[digest_type=] [template=] [permit_directio]
 				[appraise_type=] [appraise_flag=]
 				[appraise_algos=] [keyrings=]
@@ -138,6 +138,12 @@ Description:
 
 			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
 
+		It is possible to explicitly specify which security
+		module a rule applies to using lsm=.  If the security
+		module specified is not active on the system the rule
+		will be rejected.  If lsm= is not specified the first
+		security module registered on the system will be assumed.
+
 		Example of measure rules using alternate PCRs::
 
 			measure func=KEXEC_KERNEL_CHECK pcr=4
include/linux/security.h +8 -6
index 0f0fb2077f41..6ee00f3a10a7 100644
@@ -2012,25 +2012,27 @@ static inline void security_audit_rule_free(struct audit_lsm_rules *lsmrules)
 #endif /* CONFIG_AUDIT */
 
 #if defined(CONFIG_IMA_LSM_RULES) && defined(CONFIG_SECURITY)
-int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule);
-int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule);
-void ima_filter_rule_free(void *lsmrule);
+int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule,
+			 int lsmslot);
+int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
+			  int lsmslot);
+void ima_filter_rule_free(void *lsmrule, int lsmslot);
 
 #else
 
 static inline int ima_filter_rule_init(u32 field, u32 op, char *rulestr,
-					   void **lsmrule)
+				       void **lsmrule, int lsmslot)
 {
 	return 0;
 }
 
 static inline int ima_filter_rule_match(u32 secid, u32 field, u32 op,
-					    void *lsmrule)
+					void *lsmrule, int lsmslot)
 {
 	return 0;
 }
 
-static inline void ima_filter_rule_free(void *lsmrule)
+static inline void ima_filter_rule_free(void *lsmrule, int lsmslot)
 { }
 
 #endif /* defined(CONFIG_IMA_LSM_RULES) && defined(CONFIG_SECURITY) */
security/integrity/ima/ima_policy.c +64 -6

148 lines not on this page · raw message

security/security.c +29 -6
index 2c197c25746c..b74debe82d82 100644
@@ -2745,19 +2745,42 @@ int security_audit_rule_match(u32 secid, u32 field, u32 op,
  * The integrity subsystem uses the same hooks as
  * the audit subsystem.
  */
-int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule)
+int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule,
+			 int lsmslot)
 {
-	return call_int_hook(audit_rule_init, 0, field, op, rulestr, lsmrule);
+	struct security_hook_list *hp;
+
+	hlist_for_each_entry(hp, &security_hook_heads.audit_rule_init, list)
+		if (hp->lsmid->slot == lsmslot)
+			return hp->hook.audit_rule_init(field, op, rulestr,
+							lsmrule);
+
+	return 0;
 }
 
-void ima_filter_rule_free(void *lsmrule)
+void ima_filter_rule_free(void *lsmrule, int lsmslot)
 {
-	call_void_hook(audit_rule_free, lsmrule);
+	struct security_hook_list *hp;
+
+	hlist_for_each_entry(hp, &security_hook_heads.audit_rule_free, list) {
+		if (hp->lsmid->slot == lsmslot) {
+			hp->hook.audit_rule_free(lsmrule);
+			return;
+		}
+	}
 }
 
-int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule)
+int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
+			  int lsmslot)
 {
-	return call_int_hook(audit_rule_match, 0, secid, field, op, lsmrule);
+	struct security_hook_list *hp;
+
+	hlist_for_each_entry(hp, &security_hook_heads.audit_rule_match, list)
+		if (hp->lsmid->slot == lsmslot)
+			return hp->hook.audit_rule_match(secid, field, op,
+							 lsmrule);
+
+	return 0;
 }
 #endif /* CONFIG_IMA_LSM_RULES */
 
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#35 lore raw

PATCH v38 12/39 LSM: Use lsmblob in security_audit_rule_match

In reply to Casey Schaufler

Change the secid parameter of security_audit_rule_match to a lsmblob structure pointer. Pass the entry from the lsmblob structure for the approprite slot to the LSM hook.

Change the users of security_audit_rule_match to use the lsmblob instead of a u32. The scaffolding function lsmblob_init() fills the blob with the value of the old secid, ensuring that it is available to the appropriate module hook. The sources of the secid, security_task_getsecid() and security_inode_getsecid(), will be converted to use the blob structure later in the series. At the point the use of lsmblob_init() is dropped.

---
 include/linux/security.h |  5 +++--
 kernel/auditfilter.c     |  6 ++++--
 kernel/auditsc.c         | 16 +++++++++++-----
 security/security.c      |  5 +++--
 4 files changed, 21 insertions(+), 11 deletions(-)
include/linux/security.h +3 -2
index 6ee00f3a10a7..3fe04958f7fb 100644
@@ -1982,7 +1982,7 @@ static inline int security_key_getsecurity(struct key *key, char **_buffer)
 int security_audit_rule_init(u32 field, u32 op, char *rulestr,
 			     struct audit_lsm_rules *lsmrules);
 int security_audit_rule_known(struct audit_krule *krule);
-int security_audit_rule_match(u32 secid, u32 field, u32 op,
+int security_audit_rule_match(struct lsmblob *blob, u32 field, u32 op,
 			      struct audit_lsm_rules *lsmrules);
 void security_audit_rule_free(struct audit_lsm_rules *lsmrules);
 
@@ -1999,7 +1999,8 @@ static inline int security_audit_rule_known(struct audit_krule *krule)
 	return 0;
 }
 
-static inline int security_audit_rule_match(u32 secid, u32 field, u32 op,
+static inline int security_audit_rule_match(struct lsmblob *blob,
+					    u32 field, u32 op,
 					    struct audit_lsm_rules *lsmrules)
 {
 	return 0;
kernel/auditfilter.c +4 -2
index de75bd6ad866..15cd4fe35e9c 100644
@@ -1337,6 +1337,7 @@ int audit_filter(int msgtype, unsigned int listtype)
 
 		for (i = 0; i < e->rule.field_count; i++) {
 			struct audit_field *f = &e->rule.fields[i];
+			struct lsmblob blob;
 			pid_t pid;
 			u32 sid;
 
@@ -1369,8 +1370,9 @@ int audit_filter(int msgtype, unsigned int listtype)
 			case AUDIT_SUBJ_CLR:
 				if (f->lsm_str) {
 					security_current_getsecid_subj(&sid);
-					result = security_audit_rule_match(sid,
-						   f->type, f->op,
+					lsmblob_init(&blob, sid);
+					result = security_audit_rule_match(
+						   &blob, f->type, f->op,
 						   &f->lsm_rules);
 				}
 				break;
kernel/auditsc.c +11 -5
index 482805f6ea68..5fab2367bfd0 100644
@@ -468,6 +468,7 @@ static int audit_filter_rules(struct task_struct *tsk,
 	const struct cred *cred;
 	int i, need_sid = 1;
 	u32 sid;
+	struct lsmblob blob;
 	unsigned int sessionid;
 
 	if (ctx && rule->prio <= ctx->prio)
@@ -678,8 +679,10 @@ static int audit_filter_rules(struct task_struct *tsk,
 					security_current_getsecid_subj(&sid);
 					need_sid = 0;
 				}
-				result = security_audit_rule_match(sid, f->type,
-							f->op, &f->lsm_rules);
+				lsmblob_init(&blob, sid);
+				result = security_audit_rule_match(&blob,
+							f->type, f->op,
+							&f->lsm_rules);
 			}
 			break;
 		case AUDIT_OBJ_USER:
@@ -692,15 +695,17 @@ static int audit_filter_rules(struct task_struct *tsk,
 			if (f->lsm_str) {
 				/* Find files that match */
 				if (name) {
+					lsmblob_init(&blob, name->osid);
 					result = security_audit_rule_match(
-								name->osid,
+								&blob,
 								f->type,
 								f->op,
 								&f->lsm_rules);
 				} else if (ctx) {
 					list_for_each_entry(n, &ctx->names_list, list) {
+						lsmblob_init(&blob, n->osid);
 						if (security_audit_rule_match(
-							n->osid, f->type, f->op,
+							&blob, f->type, f->op,
 							&f->lsm_rules)) {
 							++result;
 							break;
@@ -710,7 +715,8 @@ static int audit_filter_rules(struct task_struct *tsk,
 				/* Find ipc objects that match */
 				if (!ctx || ctx->type != AUDIT_IPC)
 					break;
-				if (security_audit_rule_match(ctx->ipc.osid,
+				lsmblob_init(&blob, ctx->ipc.osid);
+				if (security_audit_rule_match(&blob,
 							      f->type, f->op,
 							      &f->lsm_rules))
 					++result;
security/security.c +3 -2
index b74debe82d82..96faeff2c73b 100644
@@ -2720,7 +2720,7 @@ void security_audit_rule_free(struct audit_lsm_rules *lsmrules)
 	}
 }
 
-int security_audit_rule_match(u32 secid, u32 field, u32 op,
+int security_audit_rule_match(struct lsmblob *blob, u32 field, u32 op,
 			      struct audit_lsm_rules *lsmrules)
 {
 	struct security_hook_list *hp;
@@ -2731,7 +2731,8 @@ int security_audit_rule_match(u32 secid, u32 field, u32 op,
 			continue;
 		if (lsmrules->rule[hp->lsmid->slot] == NULL)
 			continue;
-		rc = hp->hook.audit_rule_match(secid, field, op,
+		rc = hp->hook.audit_rule_match(blob->secid[hp->lsmid->slot],
+					field, op,
 					&lsmrules->rule[hp->lsmid->slot]);
 		if (rc)
 			return rc;
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#36 lore raw

PATCH v38 13/39 LSM: Use lsmblob in security_kernel_act_as

In reply to Casey Schaufler

Change the security_kernel_act_as interface to use a lsmblob structure in place of the single u32 secid in support of module stacking. Change its only caller, set_security_override, to do the same. Change that one's only caller, set_security_override_from_ctx, to call it with the new parameter type.

The security module hook is unchanged, still taking a secid. The infrastructure passes the correct entry from the lsmblob. lsmblob_init() is used to fill the lsmblob structure, however this will be removed later in the series when security_secctx_to_secid() is updated to provide a lsmblob instead of a secid.

To: David Howells <[email protected]>

---
 include/linux/cred.h     |  3 ++-
 include/linux/security.h |  5 +++--
 kernel/cred.c            | 10 ++++++----
 security/security.c      | 14 ++++++++++++--
 4 files changed, 23 insertions(+), 9 deletions(-)
include/linux/cred.h +2 -1
index 9ed9232af934..610f70a99f60 100644
@@ -18,6 +18,7 @@
 
 struct cred;
 struct inode;
+struct lsmblob;
 
 /*
  * COW Supplementary groups list
@@ -165,7 +166,7 @@ extern const struct cred *override_creds(const struct cred *);
 extern void revert_creds(const struct cred *);
 extern struct cred *prepare_kernel_cred(struct task_struct *);
 extern int change_create_files_as(struct cred *, struct inode *);
-extern int set_security_override(struct cred *, u32);
+extern int set_security_override(struct cred *, struct lsmblob *);
 extern int set_security_override_from_ctx(struct cred *, const char *);
 extern int set_create_files_as(struct cred *, struct inode *);
 extern int cred_fscmp(const struct cred *, const struct cred *);
include/linux/security.h +3 -2
index 3fe04958f7fb..e95801437328 100644
@@ -483,7 +483,7 @@ void security_cred_free(struct cred *cred);
 int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp);
 void security_transfer_creds(struct cred *new, const struct cred *old);
 void security_cred_getsecid(const struct cred *c, u32 *secid);
-int security_kernel_act_as(struct cred *new, u32 secid);
+int security_kernel_act_as(struct cred *new, struct lsmblob *blob);
 int security_kernel_create_files_as(struct cred *new, struct inode *inode);
 int security_kernel_module_request(char *kmod_name);
 int security_kernel_load_data(enum kernel_load_data_id id, bool contents);
@@ -1126,7 +1126,8 @@ static inline void security_cred_getsecid(const struct cred *c, u32 *secid)
 	*secid = 0;
 }
 
-static inline int security_kernel_act_as(struct cred *cred, u32 secid)
+static inline int security_kernel_act_as(struct cred *cred,
+					 struct lsmblob *blob)
 {
 	return 0;
 }
kernel/cred.c +6 -4
index e10c15f51c1f..3925d38f49f4 100644
@@ -767,14 +767,14 @@ EXPORT_SYMBOL(prepare_kernel_cred);
 /**
  * set_security_override - Set the security ID in a set of credentials
  * @new: The credentials to alter
- * @secid: The LSM security ID to set
+ * @blob: The LSM security information to set
  *
  * Set the LSM security ID in a set of credentials so that the subjective
  * security is overridden when an alternative set of credentials is used.
  */
-int set_security_override(struct cred *new, u32 secid)
+int set_security_override(struct cred *new, struct lsmblob *blob)
 {
-	return security_kernel_act_as(new, secid);
+	return security_kernel_act_as(new, blob);
 }
 EXPORT_SYMBOL(set_security_override);
 
@@ -790,6 +790,7 @@ EXPORT_SYMBOL(set_security_override);
  */
 int set_security_override_from_ctx(struct cred *new, const char *secctx)
 {
+	struct lsmblob blob;
 	u32 secid;
 	int ret;
 
@@ -797,7 +798,8 @@ int set_security_override_from_ctx(struct cred *new, const char *secctx)
 	if (ret < 0)
 		return ret;
 
-	return set_security_override(new, secid);
+	lsmblob_init(&blob, secid);
+	return set_security_override(new, &blob);
 }
 EXPORT_SYMBOL(set_security_override_from_ctx);
 
security/security.c +12 -2
index 96faeff2c73b..ca749a8f36b8 100644
@@ -1829,9 +1829,19 @@ void security_cred_getsecid(const struct cred *c, u32 *secid)
 }
 EXPORT_SYMBOL(security_cred_getsecid);
 
-int security_kernel_act_as(struct cred *new, u32 secid)
+int security_kernel_act_as(struct cred *new, struct lsmblob *blob)
 {
-	return call_int_hook(kernel_act_as, 0, new, secid);
+	struct security_hook_list *hp;
+	int rc;
+
+	hlist_for_each_entry(hp, &security_hook_heads.kernel_act_as, list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		rc = hp->hook.kernel_act_as(new, blob->secid[hp->lsmid->slot]);
+		if (rc != 0)
+			return rc;
+	}
+	return 0;
 }
 
 int security_kernel_create_files_as(struct cred *new, struct inode *inode)
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#37 lore raw

PATCH v38 14/39 LSM: Use lsmblob in security_secctx_to_secid

In reply to Casey Schaufler

Change the security_secctx_to_secid interface to use a lsmblob structure in place of the single u32 secid in support of module stacking. Change its callers to do the same.

The security module hook is unchanged, still passing back a secid. The infrastructure passes the correct entry from the lsmblob.

To: Pablo Neira Ayuso <[email protected]>

---
 include/linux/security.h          | 26 ++++++++++++++++++--
 kernel/cred.c                     |  4 +---
 net/netfilter/nft_meta.c          | 10 ++++----
 net/netfilter/xt_SECMARK.c        |  7 +++++-
 net/netlabel/netlabel_unlabeled.c | 23 +++++++++++-------
 security/security.c               | 40 ++++++++++++++++++++++++++-----
 6 files changed, 85 insertions(+), 25 deletions(-)
include/linux/security.h +24 -2
index e95801437328..0134a938fd65 100644
@@ -218,6 +218,27 @@ static inline bool lsmblob_equal(const struct lsmblob *bloba,
 extern int lsm_name_to_slot(char *name);
 extern const char *lsm_slot_to_name(int slot);
 
+/**
+ * lsmblob_value - find the first non-zero value in an lsmblob structure.
+ * @blob: Pointer to the data
+ *
+ * This needs to be used with extreme caution, as the cases where
+ * it is appropriate are rare.
+ *
+ * Return the first secid value set in the lsmblob.
+ * There should only be one.
+ */
+static inline u32 lsmblob_value(const struct lsmblob *blob)
+{
+	int i;
+
+	for (i = 0; i < LSMBLOB_ENTRIES; i++)
+		if (blob->secid[i])
+			return blob->secid[i];
+
+	return 0;
+}
+
 /* These functions are in security/commoncap.c */
 extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
 		       int cap, unsigned int opts);
@@ -549,7 +570,8 @@ int security_setprocattr(int lsmid, const char *name, void *value, size_t size);
 int security_netlink_send(struct sock *sk, struct sk_buff *skb);
 int security_ismaclabel(const char *name);
 int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen);
-int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid);
+int security_secctx_to_secid(const char *secdata, u32 seclen,
+			     struct lsmblob *blob);
 void security_release_secctx(char *secdata, u32 seclen);
 void security_inode_invalidate_secctx(struct inode *inode);
 int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
@@ -1411,7 +1433,7 @@ static inline int security_secid_to_secctx(u32 secid, char **secdata, u32 *secle
 
 static inline int security_secctx_to_secid(const char *secdata,
 					   u32 seclen,
-					   u32 *secid)
+					   struct lsmblob *blob)
 {
 	return -EOPNOTSUPP;
 }
kernel/cred.c +1 -3
index 3925d38f49f4..adea727744f4 100644
@@ -791,14 +791,12 @@ EXPORT_SYMBOL(set_security_override);
 int set_security_override_from_ctx(struct cred *new, const char *secctx)
 {
 	struct lsmblob blob;
-	u32 secid;
 	int ret;
 
-	ret = security_secctx_to_secid(secctx, strlen(secctx), &secid);
+	ret = security_secctx_to_secid(secctx, strlen(secctx), &blob);
 	if (ret < 0)
 		return ret;
 
-	lsmblob_init(&blob, secid);
 	return set_security_override(new, &blob);
 }
 EXPORT_SYMBOL(set_security_override_from_ctx);
net/netfilter/nft_meta.c +5 -5
index 55d2d49c3425..2c6edee9fbea 100644
@@ -851,21 +851,21 @@ static const struct nla_policy nft_secmark_policy[NFTA_SECMARK_MAX + 1] = {
 
 static int nft_secmark_compute_secid(struct nft_secmark *priv)
 {
-	u32 tmp_secid = 0;
+	struct lsmblob blob;
 	int err;
 
-	err = security_secctx_to_secid(priv->ctx, strlen(priv->ctx), &tmp_secid);
+	err = security_secctx_to_secid(priv->ctx, strlen(priv->ctx), &blob);
 	if (err)
 		return err;
 
-	if (!tmp_secid)
+	if (!lsmblob_is_set(&blob))
 		return -ENOENT;
 
-	err = security_secmark_relabel_packet(tmp_secid);
+	err = security_secmark_relabel_packet(lsmblob_value(&blob));
 	if (err)
 		return err;
 
-	priv->secid = tmp_secid;
+	priv->secid = lsmblob_value(&blob);
 	return 0;
 }
 
net/netfilter/xt_SECMARK.c +6 -1
index 498a0bf6f044..87ca3a537d1c 100644
@@ -42,13 +42,14 @@ secmark_tg(struct sk_buff *skb, const struct xt_secmark_target_info_v1 *info)
 
 static int checkentry_lsm(struct xt_secmark_target_info_v1 *info)
 {
+	struct lsmblob blob;
 	int err;
 
 	info->secctx[SECMARK_SECCTX_MAX - 1] = '\0';
 	info->secid = 0;
 
 	err = security_secctx_to_secid(info->secctx, strlen(info->secctx),
-				       &info->secid);
+				       &blob);
 	if (err) {
 		if (err == -EINVAL)
 			pr_info_ratelimited("invalid security context \'%s\'\n",
@@ -56,6 +57,10 @@ static int checkentry_lsm(struct xt_secmark_target_info_v1 *info)
 		return err;
 	}
 
+	/* xt_secmark_target_info can't be changed to use lsmblobs because
+	 * it is exposed as an API. Use lsmblob_value() to get the one
+	 * value that got set by security_secctx_to_secid(). */
+	info->secid = lsmblob_value(&blob);
 	if (!info->secid) {
 		pr_info_ratelimited("unable to map security context \'%s\'\n",
 				    info->secctx);
net/netlabel/netlabel_unlabeled.c +15 -8
index 0555dffd80e0..87fb0747d3e9 100644
@@ -880,7 +880,7 @@ static int netlbl_unlabel_staticadd(struct sk_buff *skb,
 	void *addr;
 	void *mask;
 	u32 addr_len;
-	u32 secid;
+	struct lsmblob blob;
 	struct netlbl_audit audit_info;
 
 	/* Don't allow users to add both IPv4 and IPv6 addresses for a
@@ -904,13 +904,18 @@ static int netlbl_unlabel_staticadd(struct sk_buff *skb,
 	ret_val = security_secctx_to_secid(
 		                  nla_data(info->attrs[NLBL_UNLABEL_A_SECCTX]),
 				  nla_len(info->attrs[NLBL_UNLABEL_A_SECCTX]),
-				  &secid);
+				  &blob);
 	if (ret_val != 0)
 		return ret_val;
 
+	/* netlbl_unlhsh_add will be changed to pass a struct lsmblob *
+	 * instead of a u32 later in this patch set. security_secctx_to_secid()
+	 * will only be setting one entry in the lsmblob struct, so it is
+	 * safe to use lsmblob_value() to get that one value. */
+
 	return netlbl_unlhsh_add(&init_net,
-				 dev_name, addr, mask, addr_len, secid,
-				 &audit_info);
+				 dev_name, addr, mask, addr_len,
+				 lsmblob_value(&blob), &audit_info);
 }
 
 /**
@@ -931,7 +936,7 @@ static int netlbl_unlabel_staticadddef(struct sk_buff *skb,
 	void *addr;
 	void *mask;
 	u32 addr_len;
-	u32 secid;
+	struct lsmblob blob;
 	struct netlbl_audit audit_info;
 
 	/* Don't allow users to add both IPv4 and IPv6 addresses for a
@@ -953,13 +958,15 @@ static int netlbl_unlabel_staticadddef(struct sk_buff *skb,
 	ret_val = security_secctx_to_secid(
 		                  nla_data(info->attrs[NLBL_UNLABEL_A_SECCTX]),
 				  nla_len(info->attrs[NLBL_UNLABEL_A_SECCTX]),
-				  &secid);
+				  &blob);
 	if (ret_val != 0)
 		return ret_val;
 
+	/* security_secctx_to_secid() will only put one secid into the lsmblob
+	 * so it's safe to use lsmblob_value() to get the secid. */
 	return netlbl_unlhsh_add(&init_net,
-				 NULL, addr, mask, addr_len, secid,
-				 &audit_info);
+				 NULL, addr, mask, addr_len,
+				 lsmblob_value(&blob), &audit_info);
 }
 
 /**
security/security.c +34 -6
index ca749a8f36b8..0c5be69d8146 100644
@@ -2228,10 +2228,22 @@ int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
 }
 EXPORT_SYMBOL(security_secid_to_secctx);
 
-int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid)
+int security_secctx_to_secid(const char *secdata, u32 seclen,
+			     struct lsmblob *blob)
 {
-	*secid = 0;
-	return call_int_hook(secctx_to_secid, 0, secdata, seclen, secid);
+	struct security_hook_list *hp;
+	int rc;
+
+	lsmblob_init(blob, 0);
+	hlist_for_each_entry(hp, &security_hook_heads.secctx_to_secid, list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		rc = hp->hook.secctx_to_secid(secdata, seclen,
+					      &blob->secid[hp->lsmid->slot]);
+		if (rc != 0)
+			return rc;
+	}
+	return 0;
 }
 EXPORT_SYMBOL(security_secctx_to_secid);
 
@@ -2382,10 +2394,26 @@ int security_socket_getpeersec_stream(struct socket *sock, char __user *optval,
 				optval, optlen, len);
 }
 
-int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid)
+int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb,
+				     u32 *secid)
 {
-	return call_int_hook(socket_getpeersec_dgram, -ENOPROTOOPT, sock,
-			     skb, secid);
+	struct security_hook_list *hp;
+	int rc = -ENOPROTOOPT;
+
+	/*
+	 * Only one security module should provide a real hook for
+	 * this. A stub or bypass like is used in BPF should either
+	 * (somehow) leave rc unaltered or return -ENOPROTOOPT.
+	 */
+	hlist_for_each_entry(hp, &security_hook_heads.socket_getpeersec_dgram,
+			     list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		rc = hp->hook.socket_getpeersec_dgram(sock, skb, secid);
+		if (rc != -ENOPROTOOPT)
+			break;
+	}
+	return rc;
 }
 EXPORT_SYMBOL(security_socket_getpeersec_dgram);
 
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#38 lore raw

PATCH v38 15/39 LSM: Use lsmblob in security_secid_to_secctx

In reply to Casey Schaufler

Change security_secid_to_secctx() to take a lsmblob as input instead of a u32 secid. It will then call the LSM hooks using the lsmblob element allocated for that module. The callers have been updated as well. This allows for the possibility that more than one module may be called upon to translate a secid to a string, as can occur in the audit code.

To: Pablo Neira Ayuso <[email protected]>

---
 drivers/android/binder.c                | 12 +++++++++-
 include/linux/security.h                |  5 +++--
 include/net/scm.h                       |  7 +++++-
 kernel/audit.c                          | 21 +++++++++++++++--
 kernel/auditsc.c                        | 27 ++++++++++++++++++----
 net/ipv4/ip_sockglue.c                  |  4 +++-
 net/netfilter/nf_conntrack_netlink.c    | 14 ++++++++++--
 net/netfilter/nf_conntrack_standalone.c |  4 +++-
 net/netfilter/nfnetlink_queue.c         | 11 +++++++--
 net/netlabel/netlabel_unlabeled.c       | 30 +++++++++++++++++++++----
 net/netlabel/netlabel_user.c            |  6 ++---
 security/security.c                     | 11 +++++----
 12 files changed, 123 insertions(+), 29 deletions(-)
drivers/android/binder.c +11 -1
index 6428f6be69e3..34602b68d2a1 100644
@@ -3170,10 +3170,20 @@ static void binder_transaction(struct binder_proc *proc,
 
 	if (target_node && target_node->txn_security_ctx) {
 		u32 secid;
+		struct lsmblob blob;
 		size_t added_size;
 
 		security_cred_getsecid(proc->cred, &secid);
-		ret = security_secid_to_secctx(secid, &secctx, &secctx_sz);
+		/*
+		 * Later in this patch set security_task_getsecid() will
+		 * provide a lsmblob instead of a secid. lsmblob_init
+		 * is used to ensure that all the secids in the lsmblob
+		 * get the value returned from security_task_getsecid(),
+		 * which means that the one expected by
+		 * security_secid_to_secctx() will be set.
+		 */
+		lsmblob_init(&blob, secid);
+		ret = security_secid_to_secctx(&blob, &secctx, &secctx_sz);
 		if (ret) {
 			binder_txn_error("%d:%d failed to get security context\n",
 				thread->pid, proc->pid);
include/linux/security.h +3 -2
index 0134a938fd65..d9ab76c909e0 100644
@@ -569,7 +569,7 @@ int security_getprocattr(struct task_struct *p, int lsmid, char *name,
 int security_setprocattr(int lsmid, const char *name, void *value, size_t size);
 int security_netlink_send(struct sock *sk, struct sk_buff *skb);
 int security_ismaclabel(const char *name);
-int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen);
+int security_secid_to_secctx(struct lsmblob *blob, char **secdata, u32 *seclen);
 int security_secctx_to_secid(const char *secdata, u32 seclen,
 			     struct lsmblob *blob);
 void security_release_secctx(char *secdata, u32 seclen);
@@ -1426,7 +1426,8 @@ static inline int security_ismaclabel(const char *name)
 	return 0;
 }
 
-static inline int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
+static inline int security_secid_to_secctx(struct lsmblob *blob,
+					   char **secdata, u32 *seclen)
 {
 	return -EOPNOTSUPP;
 }
include/net/scm.h +6 -1
index 1ce365f4c256..23a35ff1b3f2 100644
@@ -92,12 +92,17 @@ static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
 #ifdef CONFIG_SECURITY_NETWORK
 static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm)
 {
+	struct lsmblob lb;
 	char *secdata;
 	u32 seclen;
 	int err;
 
 	if (test_bit(SOCK_PASSSEC, &sock->flags)) {
-		err = security_secid_to_secctx(scm->secid, &secdata, &seclen);
+		/* There can only be one security module using the secid,
+		 * and the infrastructure will know which it is.
+		 */
+		lsmblob_init(&lb, scm->secid);
+		err = security_secid_to_secctx(&lb, &secdata, &seclen);
 
 		if (!err) {
 			put_cmsg(msg, SOL_SOCKET, SCM_SECURITY, seclen, secdata);
kernel/audit.c +19 -2
index a75978ae38ad..6aa7db400d10 100644
@@ -1464,7 +1464,16 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case AUDIT_SIGNAL_INFO:
 		len = 0;
 		if (audit_sig_sid) {
-			err = security_secid_to_secctx(audit_sig_sid, &ctx, &len);
+			struct lsmblob blob;
+
+			/*
+			 * lsmblob_init sets all values in the lsmblob
+			 * to audit_sig_sid. This is temporary until
+			 * audit_sig_sid is converted to a lsmblob, which
+			 * happens later in this patch set.
+			 */
+			lsmblob_init(&blob, audit_sig_sid);
+			err = security_secid_to_secctx(&blob, &ctx, &len);
 			if (err)
 				return err;
 		}
@@ -2170,12 +2179,20 @@ int audit_log_task_context(struct audit_buffer *ab)
 	unsigned len;
 	int error;
 	u32 sid;
+	struct lsmblob blob;
 
 	security_current_getsecid_subj(&sid);
 	if (!sid)
 		return 0;
 
-	error = security_secid_to_secctx(sid, &ctx, &len);
+	/*
+	 * lsmblob_init sets all values in the lsmblob to sid.
+	 * This is temporary until security_task_getsecid is converted
+	 * to use a lsmblob, which happens later in this patch set.
+	 */
+	lsmblob_init(&blob, sid);
+	error = security_secid_to_secctx(&blob, &ctx, &len);
+
 	if (error) {
 		if (error != -EINVAL)
 			goto error_path;
kernel/auditsc.c +23 -4
index 5fab2367bfd0..d083c050d660 100644
@@ -679,6 +679,13 @@ static int audit_filter_rules(struct task_struct *tsk,
 					security_current_getsecid_subj(&sid);
 					need_sid = 0;
 				}
+				/*
+				 * lsmblob_init sets all values in the lsmblob
+				 * to sid. This is temporary until
+				 * security_task_getsecid() is converted to
+				 * provide a lsmblob, which happens later in
+				 * this patch set.
+				 */
 				lsmblob_init(&blob, sid);
 				result = security_audit_rule_match(&blob,
 							f->type, f->op,
@@ -695,6 +702,13 @@ static int audit_filter_rules(struct task_struct *tsk,
 			if (f->lsm_str) {
 				/* Find files that match */
 				if (name) {
+					/*
+					 * lsmblob_init sets all values in the
+					 * lsmblob to sid. This is temporary
+					 * until name->osid is converted to a
+					 * lsmblob, which happens later in
+					 * this patch set.
+					 */
 					lsmblob_init(&blob, name->osid);
 					result = security_audit_rule_match(
 								&blob,
@@ -1093,6 +1107,7 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 	char *ctx = NULL;
 	u32 len;
 	int rc = 0;
+	struct lsmblob blob;
 
 	ab = audit_log_start(context, GFP_KERNEL, AUDIT_OBJ_PID);
 	if (!ab)
@@ -1102,7 +1117,8 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 			 from_kuid(&init_user_ns, auid),
 			 from_kuid(&init_user_ns, uid), sessionid);
 	if (sid) {
-		if (security_secid_to_secctx(sid, &ctx, &len)) {
+		lsmblob_init(&blob, sid);
+		if (security_secid_to_secctx(&blob, &ctx, &len)) {
 			audit_log_format(ab, " obj=(none)");
 			rc = 1;
 		} else {
@@ -1393,8 +1409,10 @@ static void show_special(struct audit_context *context, int *call_panic)
 		if (osid) {
 			char *ctx = NULL;
 			u32 len;
+			struct lsmblob blob;
 
-			if (security_secid_to_secctx(osid, &ctx, &len)) {
+			lsmblob_init(&blob, osid);
+			if (security_secid_to_secctx(&blob, &ctx, &len)) {
 				audit_log_format(ab, " osid=%u", osid);
 				*call_panic = 1;
 			} else {
@@ -1560,9 +1578,10 @@ static void audit_log_name(struct audit_context *context, struct audit_names *n,
 	if (n->osid != 0) {
 		char *ctx = NULL;
 		u32 len;
+		struct lsmblob blob;
 
-		if (security_secid_to_secctx(
-			n->osid, &ctx, &len)) {
+		lsmblob_init(&blob, n->osid);
+		if (security_secid_to_secctx(&blob, &ctx, &len)) {
 			audit_log_format(ab, " osid=%u", n->osid);
 			if (call_panic)
 				*call_panic = 2;
net/ipv4/ip_sockglue.c +3 -1
index e49a61a053a6..bb8e2af31d4f 100644
@@ -130,6 +130,7 @@ static void ip_cmsg_recv_checksum(struct msghdr *msg, struct sk_buff *skb,
 
 static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 {
+	struct lsmblob lb;
 	char *secdata;
 	u32 seclen, secid;
 	int err;
@@ -138,7 +139,8 @@ static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 	if (err)
 		return;
 
-	err = security_secid_to_secctx(secid, &secdata, &seclen);
+	lsmblob_init(&lb, secid);
+	err = security_secid_to_secctx(&lb, &secdata, &seclen);
 	if (err)
 		return;
 
net/netfilter/nf_conntrack_netlink.c +12 -2
index 7562b215b932..2e257aa4f61b 100644
@@ -347,8 +347,13 @@ static int ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 	struct nlattr *nest_secctx;
 	int len, ret;
 	char *secctx;
+	struct lsmblob blob;
 
-	ret = security_secid_to_secctx(ct->secmark, &secctx, &len);
+	/* lsmblob_init() puts ct->secmark into all of the secids in blob.
+	 * security_secid_to_secctx() will know which security module
+	 * to use to create the secctx.  */
+	lsmblob_init(&blob, ct->secmark);
+	ret = security_secid_to_secctx(&blob, &secctx, &len);
 	if (ret)
 		return 0;
 
@@ -656,8 +661,13 @@ static inline int ctnetlink_secctx_size(const struct nf_conn *ct)
 {
 #ifdef CONFIG_NF_CONNTRACK_SECMARK
 	int len, ret;
+	struct lsmblob blob;
 
-	ret = security_secid_to_secctx(ct->secmark, NULL, &len);
+	/* lsmblob_init() puts ct->secmark into all of the secids in blob.
+	 * security_secid_to_secctx() will know which security module
+	 * to use to create the secctx.  */
+	lsmblob_init(&blob, ct->secmark);
+	ret = security_secid_to_secctx(&blob, NULL, &len);
 	if (ret)
 		return 0;
 
net/netfilter/nf_conntrack_standalone.c +3 -1
index 4ffe84c5a82c..da61eb8cde76 100644
@@ -178,8 +178,10 @@ static void ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
 	int ret;
 	u32 len;
 	char *secctx;
+	struct lsmblob blob;
 
-	ret = security_secid_to_secctx(ct->secmark, &secctx, &len);
+	lsmblob_init(&blob, ct->secmark);
+	ret = security_secid_to_secctx(&blob, &secctx, &len);
 	if (ret)
 		return;
 
net/netfilter/nfnetlink_queue.c +9 -2
index 87a9009d5234..bc25d49575e4 100644
@@ -305,13 +305,20 @@ static u32 nfqnl_get_sk_secctx(struct sk_buff *skb, char **secdata)
 {
 	u32 seclen = 0;
 #if IS_ENABLED(CONFIG_NETWORK_SECMARK)
+	struct lsmblob blob;
+
 	if (!skb || !sk_fullsock(skb->sk))
 		return 0;
 
 	read_lock_bh(&skb->sk->sk_callback_lock);
 
-	if (skb->secmark)
-		security_secid_to_secctx(skb->secmark, secdata, &seclen);
+	if (skb->secmark) {
+		/* lsmblob_init() puts ct->secmark into all of the secids in
+		 * blob. security_secid_to_secctx() will know which security
+		 * module to use to create the secctx.  */
+		lsmblob_init(&blob, skb->secmark);
+		security_secid_to_secctx(&blob, secdata, &seclen);
+	}
 
 	read_unlock_bh(&skb->sk->sk_callback_lock);
 #endif
net/netlabel/netlabel_unlabeled.c +26 -4
index 87fb0747d3e9..980ad209b57e 100644
@@ -376,6 +376,7 @@ int netlbl_unlhsh_add(struct net *net,
 	struct audit_buffer *audit_buf = NULL;
 	char *secctx = NULL;
 	u32 secctx_len;
+	struct lsmblob blob;
 
 	if (addr_len != sizeof(struct in_addr) &&
 	    addr_len != sizeof(struct in6_addr))
@@ -438,7 +439,11 @@ int netlbl_unlhsh_add(struct net *net,
 unlhsh_add_return:
 	rcu_read_unlock();
 	if (audit_buf != NULL) {
-		if (security_secid_to_secctx(secid,
+		/* lsmblob_init() puts secid into all of the secids in blob.
+		 * security_secid_to_secctx() will know which security module
+		 * to use to create the secctx.  */
+		lsmblob_init(&blob, secid);
+		if (security_secid_to_secctx(&blob,
 					     &secctx,
 					     &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
@@ -475,6 +480,7 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 	struct net_device *dev;
 	char *secctx;
 	u32 secctx_len;
+	struct lsmblob blob;
 
 	spin_lock(&netlbl_unlhsh_lock);
 	list_entry = netlbl_af4list_remove(addr->s_addr, mask->s_addr,
@@ -493,8 +499,13 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 					  (dev != NULL ? dev->name : NULL),
 					  addr->s_addr, mask->s_addr);
 		dev_put(dev);
+		/* lsmblob_init() puts entry->secid into all of the secids
+		 * in blob. security_secid_to_secctx() will know which
+		 * security module to use to create the secctx.  */
+		if (entry != NULL)
+			lsmblob_init(&blob, entry->secid);
 		if (entry != NULL &&
-		    security_secid_to_secctx(entry->secid,
+		    security_secid_to_secctx(&blob,
 					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
@@ -536,6 +547,7 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 	struct net_device *dev;
 	char *secctx;
 	u32 secctx_len;
+	struct lsmblob blob;
 
 	spin_lock(&netlbl_unlhsh_lock);
 	list_entry = netlbl_af6list_remove(addr, mask, &iface->addr6_list);
@@ -553,8 +565,13 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 					  (dev != NULL ? dev->name : NULL),
 					  addr, mask);
 		dev_put(dev);
+		/* lsmblob_init() puts entry->secid into all of the secids
+		 * in blob. security_secid_to_secctx() will know which
+		 * security module to use to create the secctx.  */
+		if (entry != NULL)
+			lsmblob_init(&blob, entry->secid);
 		if (entry != NULL &&
-		    security_secid_to_secctx(entry->secid,
+		    security_secid_to_secctx(&blob,
 					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
@@ -1080,6 +1097,7 @@ static int netlbl_unlabel_staticlist_gen(u32 cmd,
 	u32 secid;
 	char *secctx;
 	u32 secctx_len;
+	struct lsmblob blob;
 
 	data = genlmsg_put(cb_arg->skb, NETLINK_CB(cb_arg->nl_cb->skb).portid,
 			   cb_arg->seq, &netlbl_unlabel_gnl_family,
@@ -1134,7 +1152,11 @@ static int netlbl_unlabel_staticlist_gen(u32 cmd,
 		secid = addr6->secid;
 	}
 
-	ret_val = security_secid_to_secctx(secid, &secctx, &secctx_len);
+	/* lsmblob_init() secid into all of the secids in blob.
+	 * security_secid_to_secctx() will know which security module
+	 * to use to create the secctx.  */
+	lsmblob_init(&blob, secid);
+	ret_val = security_secid_to_secctx(&blob, &secctx, &secctx_len);
 	if (ret_val != 0)
 		goto list_cb_failure;
 	ret_val = nla_put(cb_arg->skb,
net/netlabel/netlabel_user.c +3 -3
index 3ed4fea2a2de..893301ae0131 100644
@@ -86,6 +86,7 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 	struct audit_buffer *audit_buf;
 	char *secctx;
 	u32 secctx_len;
+	struct lsmblob blob;
 
 	if (audit_enabled == AUDIT_OFF)
 		return NULL;
@@ -98,10 +99,9 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 			 from_kuid(&init_user_ns, audit_info->loginuid),
 			 audit_info->sessionid);
 
+	lsmblob_init(&blob, audit_info->secid);
 	if (audit_info->secid != 0 &&
-	    security_secid_to_secctx(audit_info->secid,
-				     &secctx,
-				     &secctx_len) == 0) {
+	    security_secid_to_secctx(&blob, &secctx, &secctx_len) == 0) {
 		audit_log_format(audit_buf, " subj=%s", secctx);
 		security_release_secctx(secctx, secctx_len);
 	}
security/security.c +5 -6
index 0c5be69d8146..9c49406e5ff9 100644
@@ -2209,17 +2209,16 @@ int security_ismaclabel(const char *name)
 }
 EXPORT_SYMBOL(security_ismaclabel);
 
-int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
+int security_secid_to_secctx(struct lsmblob *blob, char **secdata, u32 *seclen)
 {
 	struct security_hook_list *hp;
 	int rc;
 
-	/*
-	 * Currently, only one LSM can implement secid_to_secctx (i.e this
-	 * LSM hook is not "stackable").
-	 */
 	hlist_for_each_entry(hp, &security_hook_heads.secid_to_secctx, list) {
-		rc = hp->hook.secid_to_secctx(secid, secdata, seclen);
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		rc = hp->hook.secid_to_secctx(blob->secid[hp->lsmid->slot],
+					      secdata, seclen);
 		if (rc != LSM_RET_DEFAULT(secid_to_secctx))
 			return rc;
 	}
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#39 lore raw

PATCH v38 16/39 LSM: Use lsmblob in security_ipc_getsecid

In reply to Casey Schaufler

There may be more than one LSM that provides IPC data for auditing. Change security_ipc_getsecid() to fill in a lsmblob structure instead of the u32 secid. The audit data structure containing the secid will be updated later, so there is a bit of scaffolding here.

---
 include/linux/security.h |  7 ++++---
 kernel/auditsc.c         |  7 ++++++-
 security/security.c      | 12 +++++++++---
 3 files changed, 19 insertions(+), 7 deletions(-)
include/linux/security.h +4 -3
index d9ab76c909e0..bedb2047138b 100644
@@ -541,7 +541,7 @@ int security_task_prctl(int option, unsigned long arg2, unsigned long arg3,
 			unsigned long arg4, unsigned long arg5);
 void security_task_to_inode(struct task_struct *p, struct inode *inode);
 int security_ipc_permission(struct kern_ipc_perm *ipcp, short flag);
-void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid);
+void security_ipc_getsecid(struct kern_ipc_perm *ipcp, struct lsmblob *blob);
 int security_msg_msg_alloc(struct msg_msg *msg);
 void security_msg_msg_free(struct msg_msg *msg);
 int security_msg_queue_alloc(struct kern_ipc_perm *msq);
@@ -1304,9 +1304,10 @@ static inline int security_ipc_permission(struct kern_ipc_perm *ipcp,
 	return 0;
 }
 
-static inline void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid)
+static inline void security_ipc_getsecid(struct kern_ipc_perm *ipcp,
+					 struct lsmblob *blob)
 {
-	*secid = 0;
+	lsmblob_init(blob, 0);
 }
 
 static inline int security_msg_msg_alloc(struct msg_msg *msg)
kernel/auditsc.c +6 -1
index d083c050d660..9eb2d84439da 100644
@@ -2643,12 +2643,17 @@ void __audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
 void __audit_ipc_obj(struct kern_ipc_perm *ipcp)
 {
 	struct audit_context *context = audit_context();
+	struct lsmblob blob;
 
 	context->ipc.uid = ipcp->uid;
 	context->ipc.gid = ipcp->gid;
 	context->ipc.mode = ipcp->mode;
 	context->ipc.has_perm = 0;
-	security_ipc_getsecid(ipcp, &context->ipc.osid);
+	security_ipc_getsecid(ipcp, &blob);
+	/* context->ipc.osid will be changed to a lsmblob later in
+	 * the patch series. This will allow auditing of all the object
+	 * labels associated with the ipc object. */
+	context->ipc.osid = lsmblob_value(&blob);
 	context->type = AUDIT_IPC;
 }
 
security/security.c +9 -3
index 9c49406e5ff9..afd6f6698fd7 100644
@@ -2030,10 +2030,16 @@ int security_ipc_permission(struct kern_ipc_perm *ipcp, short flag)
 	return call_int_hook(ipc_permission, 0, ipcp, flag);
 }
 
-void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid)
+void security_ipc_getsecid(struct kern_ipc_perm *ipcp, struct lsmblob *blob)
 {
-	*secid = 0;
-	call_void_hook(ipc_getsecid, ipcp, secid);
+	struct security_hook_list *hp;
+
+	lsmblob_init(blob, 0);
+	hlist_for_each_entry(hp, &security_hook_heads.ipc_getsecid, list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		hp->hook.ipc_getsecid(ipcp, &blob->secid[hp->lsmid->slot]);
+	}
 }
 
 int security_msg_msg_alloc(struct msg_msg *msg)
Signature · 1 line
2.37.3
author maintainer
#40 lore raw

PATCH v38 17/39 LSM: Use lsmblob in security_current_getsecid

In reply to Casey Schaufler

Change the security_current_getsecid_subj() and security_task_getsecid_obj() interfaces to fill in a lsmblob structure instead of a u32 secid in support of LSM stacking. Audit interfaces will need to collect all possible secids for possible reporting.

---
 drivers/android/binder.c              |  6 +--
 include/linux/security.h              | 31 +++++++++++---
 kernel/audit.c                        | 16 +++----
 kernel/auditfilter.c                  |  4 +-
 kernel/auditsc.c                      | 25 ++++++-----
 net/netlabel/netlabel_unlabeled.c     |  4 +-
 net/netlabel/netlabel_user.h          |  6 ++-
 security/integrity/ima/ima.h          |  6 +--
 security/integrity/ima/ima_api.c      |  6 +--
 security/integrity/ima/ima_appraise.c | 11 ++---
 security/integrity/ima/ima_main.c     | 60 ++++++++++++++-------------
 security/integrity/ima/ima_policy.c   | 15 +++----
 security/security.c                   | 25 ++++++++---
 13 files changed, 126 insertions(+), 89 deletions(-)
drivers/android/binder.c +3 -3
index 34602b68d2a1..0ab1d5179fc4 100644
@@ -3169,16 +3169,16 @@ static void binder_transaction(struct binder_proc *proc,
 	t->priority = task_nice(current);
 
 	if (target_node && target_node->txn_security_ctx) {
-		u32 secid;
 		struct lsmblob blob;
 		size_t added_size;
+		u32 secid;
 
 		security_cred_getsecid(proc->cred, &secid);
 		/*
-		 * Later in this patch set security_task_getsecid() will
+		 * Later in this patch set security_cred_getsecid() will
 		 * provide a lsmblob instead of a secid. lsmblob_init
 		 * is used to ensure that all the secids in the lsmblob
-		 * get the value returned from security_task_getsecid(),
+		 * get the value returned from security_cred_getsecid(),
 		 * which means that the one expected by
 		 * security_secid_to_secctx() will be set.
 		 */
include/linux/security.h +25 -6
index bedb2047138b..142ecbf4dfc9 100644
@@ -239,6 +239,24 @@ static inline u32 lsmblob_value(const struct lsmblob *blob)
 	return 0;
 }
 
+/**
+ * lsmblob_first - secid value for the first LSM slot
+ * @blob: Pointer to the data
+ *
+ * Return the secid value from the first LSM slot.
+ * There may not be any LSM slots.
+ *
+ * Return the value in secid[0] if there are any slots, 0 otherwise.
+ */
+static inline u32 lsmblob_first(const struct lsmblob *blob)
+{
+#if LSMBLOB_ENTRIES > 0
+	return blob->secid[0];
+#else
+	return 0;
+#endif
+}
+
 /* These functions are in security/commoncap.c */
 extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
 		       int cap, unsigned int opts);
@@ -523,8 +541,8 @@ int security_task_fix_setgroups(struct cred *new, const struct cred *old);
 int security_task_setpgid(struct task_struct *p, pid_t pgid);
 int security_task_getpgid(struct task_struct *p);
 int security_task_getsid(struct task_struct *p);
-void security_current_getsecid_subj(u32 *secid);
-void security_task_getsecid_obj(struct task_struct *p, u32 *secid);
+void security_current_getsecid_subj(struct lsmblob *blob);
+void security_task_getsecid_obj(struct task_struct *p, struct lsmblob *blob);
 int security_task_setnice(struct task_struct *p, int nice);
 int security_task_setioprio(struct task_struct *p, int ioprio);
 int security_task_getioprio(struct task_struct *p);
@@ -1226,14 +1244,15 @@ static inline int security_task_getsid(struct task_struct *p)
 	return 0;
 }
 
-static inline void security_current_getsecid_subj(u32 *secid)
+static inline void security_current_getsecid_subj(struct lsmblob *blob)
 {
-	*secid = 0;
+	lsmblob_init(blob, 0);
 }
 
-static inline void security_task_getsecid_obj(struct task_struct *p, u32 *secid)
+static inline void security_task_getsecid_obj(struct task_struct *p,
+					      struct lsmblob *blob)
 {
-	*secid = 0;
+	lsmblob_init(blob, 0);
 }
 
 static inline int security_task_setnice(struct task_struct *p, int nice)
kernel/audit.c +6 -10
index 6aa7db400d10..4e13e48afc06 100644
@@ -2178,19 +2178,12 @@ int audit_log_task_context(struct audit_buffer *ab)
 	char *ctx = NULL;
 	unsigned len;
 	int error;
-	u32 sid;
 	struct lsmblob blob;
 
-	security_current_getsecid_subj(&sid);
-	if (!sid)
+	security_current_getsecid_subj(&blob);
+	if (!lsmblob_is_set(&blob))
 		return 0;
 
-	/*
-	 * lsmblob_init sets all values in the lsmblob to sid.
-	 * This is temporary until security_task_getsecid is converted
-	 * to use a lsmblob, which happens later in this patch set.
-	 */
-	lsmblob_init(&blob, sid);
 	error = security_secid_to_secctx(&blob, &ctx, &len);
 
 	if (error) {
@@ -2399,6 +2392,7 @@ int audit_set_loginuid(kuid_t loginuid)
 int audit_signal_info(int sig, struct task_struct *t)
 {
 	kuid_t uid = current_uid(), auid;
+	struct lsmblob blob;
 
 	if (auditd_test_task(t) &&
 	    (sig == SIGTERM || sig == SIGHUP ||
@@ -2409,7 +2403,9 @@ int audit_signal_info(int sig, struct task_struct *t)
 			audit_sig_uid = auid;
 		else
 			audit_sig_uid = uid;
-		security_current_getsecid_subj(&audit_sig_sid);
+		security_current_getsecid_subj(&blob);
+		/* scaffolding until audit_sig_sid is converted */
+		audit_sig_sid = lsmblob_first(&blob);
 	}
 
 	return audit_signal_info_syscall(t);
kernel/auditfilter.c +1 -3
index 15cd4fe35e9c..39ded5cb2429 100644
@@ -1339,7 +1339,6 @@ int audit_filter(int msgtype, unsigned int listtype)
 			struct audit_field *f = &e->rule.fields[i];
 			struct lsmblob blob;
 			pid_t pid;
-			u32 sid;
 
 			switch (f->type) {
 			case AUDIT_PID:
@@ -1369,8 +1368,7 @@ int audit_filter(int msgtype, unsigned int listtype)
 			case AUDIT_SUBJ_SEN:
 			case AUDIT_SUBJ_CLR:
 				if (f->lsm_str) {
-					security_current_getsecid_subj(&sid);
-					lsmblob_init(&blob, sid);
+					security_current_getsecid_subj(&blob);
 					result = security_audit_rule_match(
 						   &blob, f->type, f->op,
 						   &f->lsm_rules);
kernel/auditsc.c +12 -13
index 9eb2d84439da..b2879bdf45d8 100644
@@ -467,7 +467,6 @@ static int audit_filter_rules(struct task_struct *tsk,
 {
 	const struct cred *cred;
 	int i, need_sid = 1;
-	u32 sid;
 	struct lsmblob blob;
 	unsigned int sessionid;
 
@@ -676,17 +675,9 @@ static int audit_filter_rules(struct task_struct *tsk,
 					 * here even though it always refs
 					 * @current's creds
 					 */
-					security_current_getsecid_subj(&sid);
+					security_current_getsecid_subj(&blob);
 					need_sid = 0;
 				}
-				/*
-				 * lsmblob_init sets all values in the lsmblob
-				 * to sid. This is temporary until
-				 * security_task_getsecid() is converted to
-				 * provide a lsmblob, which happens later in
-				 * this patch set.
-				 */
-				lsmblob_init(&blob, sid);
 				result = security_audit_rule_match(&blob,
 							f->type, f->op,
 							&f->lsm_rules);
@@ -2745,12 +2736,15 @@ int __audit_sockaddr(int len, void *a)
 void __audit_ptrace(struct task_struct *t)
 {
 	struct audit_context *context = audit_context();
+	struct lsmblob blob;
 
 	context->target_pid = task_tgid_nr(t);
 	context->target_auid = audit_get_loginuid(t);
 	context->target_uid = task_uid(t);
 	context->target_sessionid = audit_get_sessionid(t);
-	security_task_getsecid_obj(t, &context->target_sid);
+	security_task_getsecid_obj(t, &blob);
+	/* scaffolding - until target_sid is converted */
+	context->target_sid = lsmblob_first(&blob);
 	memcpy(context->target_comm, t->comm, TASK_COMM_LEN);
 }
 
@@ -2766,6 +2760,7 @@ int audit_signal_info_syscall(struct task_struct *t)
 	struct audit_aux_data_pids *axp;
 	struct audit_context *ctx = audit_context();
 	kuid_t t_uid = task_uid(t);
+	struct lsmblob blob;
 
 	if (!audit_signals || audit_dummy_context())
 		return 0;
@@ -2777,7 +2772,9 @@ int audit_signal_info_syscall(struct task_struct *t)
 		ctx->target_auid = audit_get_loginuid(t);
 		ctx->target_uid = t_uid;
 		ctx->target_sessionid = audit_get_sessionid(t);
-		security_task_getsecid_obj(t, &ctx->target_sid);
+		security_task_getsecid_obj(t, &blob);
+		/* scaffolding until target_sid is converted */
+		ctx->target_sid = lsmblob_first(&blob);
 		memcpy(ctx->target_comm, t->comm, TASK_COMM_LEN);
 		return 0;
 	}
@@ -2798,7 +2795,9 @@ int audit_signal_info_syscall(struct task_struct *t)
 	axp->target_auid[axp->pid_count] = audit_get_loginuid(t);
 	axp->target_uid[axp->pid_count] = t_uid;
 	axp->target_sessionid[axp->pid_count] = audit_get_sessionid(t);
-	security_task_getsecid_obj(t, &axp->target_sid[axp->pid_count]);
+	security_task_getsecid_obj(t, &blob);
+	/* scaffolding until target_sid is converted */
+	axp->target_sid[axp->pid_count] = lsmblob_first(&blob);
 	memcpy(axp->target_comm[axp->pid_count], t->comm, TASK_COMM_LEN);
 	axp->pid_count++;
 
net/netlabel/netlabel_unlabeled.c +3 -1
index 980ad209b57e..604b9d1dd085 100644
@@ -1562,11 +1562,13 @@ int __init netlbl_unlabel_defconf(void)
 	int ret_val;
 	struct netlbl_dom_map *entry;
 	struct netlbl_audit audit_info;
+	struct lsmblob blob;
 
 	/* Only the kernel is allowed to call this function and the only time
 	 * it is called is at bootup before the audit subsystem is reporting
 	 * messages so don't worry to much about these values. */
-	security_current_getsecid_subj(&audit_info.secid);
+	security_current_getsecid_subj(&blob);
+	audit_info.secid = lsmblob_first(&blob);
 	audit_info.loginuid = GLOBAL_ROOT_UID;
 	audit_info.sessionid = 0;
 
net/netlabel/netlabel_user.h +5 -1
index d6c5b31eb4eb..34bb6572f33b 100644
@@ -32,7 +32,11 @@
  */
 static inline void netlbl_netlink_auditinfo(struct netlbl_audit *audit_info)
 {
-	security_current_getsecid_subj(&audit_info->secid);
+	struct lsmblob blob;
+
+	security_current_getsecid_subj(&blob);
+	/* scaffolding until secid is converted */
+	audit_info->secid = lsmblob_first(&blob);
 	audit_info->loginuid = audit_get_loginuid(current);
 	audit_info->sessionid = audit_get_sessionid(current);
 }
security/integrity/ima/ima.h +3 -3
index 1b5d70ac2dc9..f347d63b61e7 100644
@@ -255,7 +255,7 @@ static inline void ima_process_queued_keys(void) {}
 
 /* LIM API function definitions */
 int ima_get_action(struct user_namespace *mnt_userns, struct inode *inode,
-		   const struct cred *cred, u32 secid, int mask,
+		   const struct cred *cred, struct lsmblob *blob, int mask,
 		   enum ima_hooks func, int *pcr,
 		   struct ima_template_desc **template_desc,
 		   const char *func_data, unsigned int *allowed_algos);
@@ -286,8 +286,8 @@ const char *ima_d_path(const struct path *path, char **pathbuf, char *filename);
 
 /* IMA policy related functions */
 int ima_match_policy(struct user_namespace *mnt_userns, struct inode *inode,
-		     const struct cred *cred, u32 secid, enum ima_hooks func,
-		     int mask, int flags, int *pcr,
+		     const struct cred *cred, struct lsmblob *blob,
+		     enum ima_hooks func, int mask, int flags, int *pcr,
 		     struct ima_template_desc **template_desc,
 		     const char *func_data, unsigned int *allowed_algos);
 void ima_init_policy(void);
security/integrity/ima/ima_api.c +3 -3
index c1e76282b5ee..8c48da6a6583 100644
@@ -166,7 +166,7 @@ void ima_add_violation(struct file *file, const unsigned char *filename,
  * @mnt_userns:	user namespace of the mount the inode was found from
  * @inode: pointer to the inode associated with the object being validated
  * @cred: pointer to credentials structure to validate
- * @secid: secid of the task being validated
+ * @blob: secid(s) of the task being validated
  * @mask: contains the permission mask (MAY_READ, MAY_WRITE, MAY_EXEC,
  *        MAY_APPEND)
  * @func: caller identifier
@@ -187,7 +187,7 @@ void ima_add_violation(struct file *file, const unsigned char *filename,
  *
  */
 int ima_get_action(struct user_namespace *mnt_userns, struct inode *inode,
-		   const struct cred *cred, u32 secid, int mask,
+		   const struct cred *cred, struct lsmblob *blob, int mask,
 		   enum ima_hooks func, int *pcr,
 		   struct ima_template_desc **template_desc,
 		   const char *func_data, unsigned int *allowed_algos)
@@ -196,7 +196,7 @@ int ima_get_action(struct user_namespace *mnt_userns, struct inode *inode,
 
 	flags &= ima_policy_flag;
 
-	return ima_match_policy(mnt_userns, inode, cred, secid, func, mask,
+	return ima_match_policy(mnt_userns, inode, cred, blob, func, mask,
 				flags, pcr, template_desc, func_data,
 				allowed_algos);
 }
security/integrity/ima/ima_appraise.c +6 -5
index bde74fcecee3..220cb94802eb 100644
@@ -73,15 +73,16 @@ bool is_ima_appraise_enabled(void)
 int ima_must_appraise(struct user_namespace *mnt_userns, struct inode *inode,
 		      int mask, enum ima_hooks func)
 {
-	u32 secid;
+	struct lsmblob blob;
 
 	if (!ima_appraise)
 		return 0;
 
-	security_current_getsecid_subj(&secid);
-	return ima_match_policy(mnt_userns, inode, current_cred(), secid,
-				func, mask, IMA_APPRAISE | IMA_HASH, NULL,
-				NULL, NULL, NULL);
+	security_current_getsecid_subj(&blob);
+	return ima_match_policy(mnt_userns, inode, current_cred(),
+				&blob, func, mask,
+				IMA_APPRAISE | IMA_HASH, NULL, NULL, NULL,
+				NULL);
 }
 
 static int ima_fix_xattr(struct dentry *dentry,
security/integrity/ima/ima_main.c +32 -28

151 lines not on this page · raw message

security/integrity/ima/ima_policy.c +8 -7
index 3ca046129ff0..2e1aadd36482 100644
@@ -563,7 +563,7 @@ static bool ima_match_rule_data(struct ima_rule_entry *rule,
  * @mnt_userns:	user namespace of the mount the inode was found from
  * @inode: a pointer to an inode
  * @cred: a pointer to a credentials structure for user validation
- * @secid: the secid of the task to be validated
+ * @blob: the secid(s) of the task to be validated
  * @func: LIM hook identifier
  * @mask: requested action (MAY_READ | MAY_WRITE | MAY_APPEND | MAY_EXEC)
  * @func_data: func specific data, may be NULL
@@ -573,7 +573,7 @@ static bool ima_match_rule_data(struct ima_rule_entry *rule,
 static bool ima_match_rules(struct ima_rule_entry *rule,
 			    struct user_namespace *mnt_userns,
 			    struct inode *inode, const struct cred *cred,
-			    u32 secid, enum ima_hooks func, int mask,
+			    struct lsmblob *blob, enum ima_hooks func, int mask,
 			    const char *func_data)
 {
 	int i;
@@ -657,7 +657,8 @@ static bool ima_match_rules(struct ima_rule_entry *rule,
 		case LSM_SUBJ_USER:
 		case LSM_SUBJ_ROLE:
 		case LSM_SUBJ_TYPE:
-			rc = ima_filter_rule_match(secid, rule->lsm[i].type,
+			rc = ima_filter_rule_match(lsmblob_first(blob),
+						   rule->lsm[i].type,
 						   Audit_equal,
 						   rule->lsm[i].rule,
 						   rule->lsm[i].rules_lsm);
@@ -702,7 +703,7 @@ static int get_subaction(struct ima_rule_entry *rule, enum ima_hooks func)
  * @inode: pointer to an inode for which the policy decision is being made
  * @cred: pointer to a credentials structure for which the policy decision is
  *        being made
- * @secid: LSM secid of the task to be validated
+ * @blob: LSM secid(s) of the task to be validated
  * @func: IMA hook identifier
  * @mask: requested action (MAY_READ | MAY_WRITE | MAY_APPEND | MAY_EXEC)
  * @pcr: set the pcr to extend
@@ -718,8 +719,8 @@ static int get_subaction(struct ima_rule_entry *rule, enum ima_hooks func)
  * than writes so ima_match_policy() is classical RCU candidate.
  */
 int ima_match_policy(struct user_namespace *mnt_userns, struct inode *inode,
-		     const struct cred *cred, u32 secid, enum ima_hooks func,
-		     int mask, int flags, int *pcr,
+		     const struct cred *cred, struct lsmblob *blob,
+		     enum ima_hooks func, int mask, int flags, int *pcr,
 		     struct ima_template_desc **template_desc,
 		     const char *func_data, unsigned int *allowed_algos)
 {
@@ -737,7 +738,7 @@ int ima_match_policy(struct user_namespace *mnt_userns, struct inode *inode,
 		if (!(entry->action & actmask))
 			continue;
 
-		if (!ima_match_rules(entry, mnt_userns, inode, cred, secid,
+		if (!ima_match_rules(entry, mnt_userns, inode, cred, blob,
 				     func, mask, func_data))
 			continue;
 
security/security.c +19 -6
index afd6f6698fd7..8bfece0911aa 100644
@@ -1940,17 +1940,30 @@ int security_task_getsid(struct task_struct *p)
 	return call_int_hook(task_getsid, 0, p);
 }
 
-void security_current_getsecid_subj(u32 *secid)
+void security_current_getsecid_subj(struct lsmblob *blob)
 {
-	*secid = 0;
-	call_void_hook(current_getsecid_subj, secid);
+	struct security_hook_list *hp;
+
+	lsmblob_init(blob, 0);
+	hlist_for_each_entry(hp, &security_hook_heads.current_getsecid_subj,
+			     list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		hp->hook.current_getsecid_subj(&blob->secid[hp->lsmid->slot]);
+	}
 }
 EXPORT_SYMBOL(security_current_getsecid_subj);
 
-void security_task_getsecid_obj(struct task_struct *p, u32 *secid)
+void security_task_getsecid_obj(struct task_struct *p, struct lsmblob *blob)
 {
-	*secid = 0;
-	call_void_hook(task_getsecid_obj, p, secid);
+	struct security_hook_list *hp;
+
+	lsmblob_init(blob, 0);
+	hlist_for_each_entry(hp, &security_hook_heads.task_getsecid_obj, list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		hp->hook.task_getsecid_obj(p, &blob->secid[hp->lsmid->slot]);
+	}
 }
 EXPORT_SYMBOL(security_task_getsecid_obj);
 
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#41 lore raw

PATCH v38 18/39 LSM: Use lsmblob in security_inode_getsecid

In reply to Casey Schaufler

Change the security_inode_getsecid() interface to fill in a lsmblob structure instead of a u32 secid. This allows for its callers to gather data from all registered LSMs. Data is provided for IMA and audit.

---
 include/linux/security.h            | 13 +++++++------
 kernel/auditsc.c                    |  6 +++++-
 security/integrity/ima/ima_policy.c |  9 +++++----
 security/security.c                 | 19 +++++++++++++------
 4 files changed, 30 insertions(+), 17 deletions(-)
include/linux/security.h +7 -6
index 142ecbf4dfc9..ca5dcaee7c23 100644
@@ -494,7 +494,7 @@ int security_inode_getsecurity(struct user_namespace *mnt_userns,
 			       void **buffer, bool alloc);
 int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags);
 int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size);
-void security_inode_getsecid(struct inode *inode, u32 *secid);
+void security_inode_getsecid(struct inode *inode, struct lsmblob *blob);
 int security_inode_copy_up(struct dentry *src, struct cred **new);
 int security_inode_copy_up_xattr(const char *name);
 int security_kernfs_init_security(struct kernfs_node *kn_dir,
@@ -1041,9 +1041,10 @@ static inline int security_inode_listsecurity(struct inode *inode, char *buffer,
 	return 0;
 }
 
-static inline void security_inode_getsecid(struct inode *inode, u32 *secid)
+static inline void security_inode_getsecid(struct inode *inode,
+					   struct lsmblob *blob)
 {
-	*secid = 0;
+	lsmblob_init(blob, 0);
 }
 
 static inline int security_inode_copy_up(struct dentry *src, struct cred **new)
@@ -2059,8 +2060,8 @@ static inline void security_audit_rule_free(struct audit_lsm_rules *lsmrules)
 #if defined(CONFIG_IMA_LSM_RULES) && defined(CONFIG_SECURITY)
 int ima_filter_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule,
 			 int lsmslot);
-int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
-			  int lsmslot);
+int ima_filter_rule_match(struct lsmblob *blob, u32 field, u32 op,
+			  void *lsmrule, int lsmslot);
 void ima_filter_rule_free(void *lsmrule, int lsmslot);
 
 #else
@@ -2071,7 +2072,7 @@ static inline int ima_filter_rule_init(u32 field, u32 op, char *rulestr,
 	return 0;
 }
 
-static inline int ima_filter_rule_match(u32 secid, u32 field, u32 op,
+static inline int ima_filter_rule_match(struct lsmblob *blob, u32 field, u32 op,
 					void *lsmrule, int lsmslot)
 {
 	return 0;
kernel/auditsc.c +5 -1
index b2879bdf45d8..ad5f33af3b50 100644
@@ -2281,13 +2281,17 @@ static void audit_copy_inode(struct audit_names *name,
 			     const struct dentry *dentry,
 			     struct inode *inode, unsigned int flags)
 {
+	struct lsmblob blob;
+
 	name->ino   = inode->i_ino;
 	name->dev   = inode->i_sb->s_dev;
 	name->mode  = inode->i_mode;
 	name->uid   = inode->i_uid;
 	name->gid   = inode->i_gid;
 	name->rdev  = inode->i_rdev;
-	security_inode_getsecid(inode, &name->osid);
+	security_inode_getsecid(inode, &blob);
+	/* scaffolding until osid is updated */
+	name->osid = lsmblob_first(&blob);
 	if (flags & AUDIT_INODE_NOEVAL) {
 		name->fcap_ver = -1;
 		return;
security/integrity/ima/ima_policy.c +5 -4
index 2e1aadd36482..e8693939447b 100644
@@ -636,7 +636,7 @@ static bool ima_match_rules(struct ima_rule_entry *rule,
 		return false;
 	for (i = 0; i < MAX_LSM_RULES; i++) {
 		int rc = 0;
-		u32 osid;
+		struct lsmblob lsmdata;
 
 		if (!rule->lsm[i].rule) {
 			if (!rule->lsm[i].args_p)
@@ -648,8 +648,9 @@ static bool ima_match_rules(struct ima_rule_entry *rule,
 		case LSM_OBJ_USER:
 		case LSM_OBJ_ROLE:
 		case LSM_OBJ_TYPE:
-			security_inode_getsecid(inode, &osid);
-			rc = ima_filter_rule_match(osid, rule->lsm[i].type,
+			security_inode_getsecid(inode, &lsmdata);
+			rc = ima_filter_rule_match(&lsmdata,
+						   rule->lsm[i].type,
 						   Audit_equal,
 						   rule->lsm[i].rule,
 						   rule->lsm[i].rules_lsm);
@@ -657,7 +658,7 @@ static bool ima_match_rules(struct ima_rule_entry *rule,
 		case LSM_SUBJ_USER:
 		case LSM_SUBJ_ROLE:
 		case LSM_SUBJ_TYPE:
-			rc = ima_filter_rule_match(lsmblob_first(blob),
+			rc = ima_filter_rule_match(blob,
 						   rule->lsm[i].type,
 						   Audit_equal,
 						   rule->lsm[i].rule,
security/security.c +13 -6
index 8bfece0911aa..563452000729 100644
@@ -1579,9 +1579,16 @@ int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer
 }
 EXPORT_SYMBOL(security_inode_listsecurity);
 
-void security_inode_getsecid(struct inode *inode, u32 *secid)
+void security_inode_getsecid(struct inode *inode, struct lsmblob *blob)
 {
-	call_void_hook(inode_getsecid, inode, secid);
+	struct security_hook_list *hp;
+
+	lsmblob_init(blob, 0);
+	hlist_for_each_entry(hp, &security_hook_heads.inode_getsecid, list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		hp->hook.inode_getsecid(inode, &blob->secid[hp->lsmid->slot]);
+	}
 }
 
 int security_inode_copy_up(struct dentry *src, struct cred **new)
@@ -2827,15 +2834,15 @@ void ima_filter_rule_free(void *lsmrule, int lsmslot)
 	}
 }
 
-int ima_filter_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
-			  int lsmslot)
+int ima_filter_rule_match(struct lsmblob *blob, u32 field, u32 op,
+			  void *lsmrule, int lsmslot)
 {
 	struct security_hook_list *hp;
 
 	hlist_for_each_entry(hp, &security_hook_heads.audit_rule_match, list)
 		if (hp->lsmid->slot == lsmslot)
-			return hp->hook.audit_rule_match(secid, field, op,
-							 lsmrule);
+			return hp->hook.audit_rule_match(blob->secid[lsmslot],
+							 field, op, lsmrule);
 
 	return 0;
 }
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#42 lore raw

PATCH v38 19/39 LSM: Use lsmblob in security_cred_getsecid

In reply to Casey Schaufler

Change the security_cred_getsecid() interface to fill in a lsmblob instead of a u32 secid. The associated data elements in the audit sub-system are changed from a secid to a lsmblob to accommodate multiple possible LSM audit users.

---
 drivers/android/binder.c          | 12 +----------
 include/linux/security.h          |  7 ++++---
 kernel/audit.c                    | 25 +++++++----------------
 kernel/audit.h                    |  3 ++-
 kernel/auditsc.c                  | 33 +++++++++++--------------------
 security/integrity/ima/ima_main.c |  4 +---
 security/security.c               | 12 ++++++++---
 7 files changed, 36 insertions(+), 60 deletions(-)
drivers/android/binder.c +1 -11
index 0ab1d5179fc4..6e1e35de1fcb 100644
@@ -3171,18 +3171,8 @@ static void binder_transaction(struct binder_proc *proc,
 	if (target_node && target_node->txn_security_ctx) {
 		struct lsmblob blob;
 		size_t added_size;
-		u32 secid;
 
-		security_cred_getsecid(proc->cred, &secid);
-		/*
-		 * Later in this patch set security_cred_getsecid() will
-		 * provide a lsmblob instead of a secid. lsmblob_init
-		 * is used to ensure that all the secids in the lsmblob
-		 * get the value returned from security_cred_getsecid(),
-		 * which means that the one expected by
-		 * security_secid_to_secctx() will be set.
-		 */
-		lsmblob_init(&blob, secid);
+		security_cred_getsecid(proc->cred, &blob);
 		ret = security_secid_to_secctx(&blob, &secctx, &secctx_sz);
 		if (ret) {
 			binder_txn_error("%d:%d failed to get security context\n",
include/linux/security.h +4 -3
index ca5dcaee7c23..9f80b685542d 100644
@@ -521,7 +521,7 @@ int security_cred_alloc_blank(struct cred *cred, gfp_t gfp);
 void security_cred_free(struct cred *cred);
 int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp);
 void security_transfer_creds(struct cred *new, const struct cred *old);
-void security_cred_getsecid(const struct cred *c, u32 *secid);
+void security_cred_getsecid(const struct cred *c, struct lsmblob *blob);
 int security_kernel_act_as(struct cred *new, struct lsmblob *blob);
 int security_kernel_create_files_as(struct cred *new, struct inode *inode);
 int security_kernel_module_request(char *kmod_name);
@@ -1162,9 +1162,10 @@ static inline void security_transfer_creds(struct cred *new,
 {
 }
 
-static inline void security_cred_getsecid(const struct cred *c, u32 *secid)
+static inline void security_cred_getsecid(const struct cred *c,
+					  struct lsmblob *blob)
 {
-	*secid = 0;
+	lsmblob_init(blob, 0);
 }
 
 static inline int security_kernel_act_as(struct cred *cred,
kernel/audit.c +7 -18
index 4e13e48afc06..3d026013e6eb 100644
@@ -125,7 +125,7 @@ static u32	audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
 /* The identity of the user shutting down the audit system. */
 static kuid_t		audit_sig_uid = INVALID_UID;
 static pid_t		audit_sig_pid = -1;
-static u32		audit_sig_sid;
+static struct lsmblob	audit_sig_lsm;
 
 /* Records can be lost in several ways:
    0) [suppressed in audit_alloc]
@@ -1463,29 +1463,21 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	}
 	case AUDIT_SIGNAL_INFO:
 		len = 0;
-		if (audit_sig_sid) {
-			struct lsmblob blob;
-
-			/*
-			 * lsmblob_init sets all values in the lsmblob
-			 * to audit_sig_sid. This is temporary until
-			 * audit_sig_sid is converted to a lsmblob, which
-			 * happens later in this patch set.
-			 */
-			lsmblob_init(&blob, audit_sig_sid);
-			err = security_secid_to_secctx(&blob, &ctx, &len);
+		if (lsmblob_is_set(&audit_sig_lsm)) {
+			err = security_secid_to_secctx(&audit_sig_lsm, &ctx,
+						       &len);
 			if (err)
 				return err;
 		}
 		sig_data = kmalloc(struct_size(sig_data, ctx, len), GFP_KERNEL);
 		if (!sig_data) {
-			if (audit_sig_sid)
+			if (lsmblob_is_set(&audit_sig_lsm))
 				security_release_secctx(ctx, len);
 			return -ENOMEM;
 		}
 		sig_data->uid = from_kuid(&init_user_ns, audit_sig_uid);
 		sig_data->pid = audit_sig_pid;
-		if (audit_sig_sid) {
+		if (lsmblob_is_set(&audit_sig_lsm)) {
 			memcpy(sig_data->ctx, ctx, len);
 			security_release_secctx(ctx, len);
 		}
@@ -2392,7 +2384,6 @@ int audit_set_loginuid(kuid_t loginuid)
 int audit_signal_info(int sig, struct task_struct *t)
 {
 	kuid_t uid = current_uid(), auid;
-	struct lsmblob blob;
 
 	if (auditd_test_task(t) &&
 	    (sig == SIGTERM || sig == SIGHUP ||
@@ -2403,9 +2394,7 @@ int audit_signal_info(int sig, struct task_struct *t)
 			audit_sig_uid = auid;
 		else
 			audit_sig_uid = uid;
-		security_current_getsecid_subj(&blob);
-		/* scaffolding until audit_sig_sid is converted */
-		audit_sig_sid = lsmblob_first(&blob);
+		security_current_getsecid_subj(&audit_sig_lsm);
 	}
 
 	return audit_signal_info_syscall(t);
kernel/audit.h +2 -1
index 58b66543b4d5..316fac62d5f7 100644
@@ -12,6 +12,7 @@
 #include <linux/fs.h>
 #include <linux/audit.h>
 #include <linux/skbuff.h>
+#include <linux/security.h>
 #include <uapi/linux/mqueue.h>
 #include <linux/tty.h>
 #include <uapi/linux/openat2.h> // struct open_how
@@ -143,7 +144,7 @@ struct audit_context {
 	kuid_t		    target_auid;
 	kuid_t		    target_uid;
 	unsigned int	    target_sessionid;
-	u32		    target_sid;
+	struct lsmblob	    target_lsm;
 	char		    target_comm[TASK_COMM_LEN];
 
 	struct audit_tree_refs *trees, *first_trees;
kernel/auditsc.c +12 -21
index ad5f33af3b50..092aba46a9b3 100644
@@ -99,7 +99,7 @@ struct audit_aux_data_pids {
 	kuid_t			target_auid[AUDIT_AUX_PIDS];
 	kuid_t			target_uid[AUDIT_AUX_PIDS];
 	unsigned int		target_sessionid[AUDIT_AUX_PIDS];
-	u32			target_sid[AUDIT_AUX_PIDS];
+	struct lsmblob		target_lsm[AUDIT_AUX_PIDS];
 	char 			target_comm[AUDIT_AUX_PIDS][TASK_COMM_LEN];
 	int			pid_count;
 };
@@ -1018,7 +1018,7 @@ static void audit_reset_context(struct audit_context *ctx)
 	ctx->target_pid = 0;
 	ctx->target_auid = ctx->target_uid = KUIDT_INIT(0);
 	ctx->target_sessionid = 0;
-	ctx->target_sid = 0;
+	lsmblob_init(&ctx->target_lsm, 0);
 	ctx->target_comm[0] = '\0';
 	unroll_tree_refs(ctx, NULL, 0);
 	WARN_ON(!list_empty(&ctx->killed_trees));
@@ -1091,14 +1091,14 @@ static inline void audit_free_context(struct audit_context *context)
 }
 
 static int audit_log_pid_context(struct audit_context *context, pid_t pid,
-				 kuid_t auid, kuid_t uid, unsigned int sessionid,
-				 u32 sid, char *comm)
+				 kuid_t auid, kuid_t uid,
+				 unsigned int sessionid,
+				 struct lsmblob *blob, char *comm)
 {
 	struct audit_buffer *ab;
 	char *ctx = NULL;
 	u32 len;
 	int rc = 0;
-	struct lsmblob blob;
 
 	ab = audit_log_start(context, GFP_KERNEL, AUDIT_OBJ_PID);
 	if (!ab)
@@ -1107,9 +1107,8 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 	audit_log_format(ab, "opid=%d oauid=%d ouid=%d oses=%d", pid,
 			 from_kuid(&init_user_ns, auid),
 			 from_kuid(&init_user_ns, uid), sessionid);
-	if (sid) {
-		lsmblob_init(&blob, sid);
-		if (security_secid_to_secctx(&blob, &ctx, &len)) {
+	if (lsmblob_is_set(blob)) {
+		if (security_secid_to_secctx(blob, &ctx, &len)) {
 			audit_log_format(ab, " obj=(none)");
 			rc = 1;
 		} else {
@@ -1789,7 +1788,7 @@ static void audit_log_exit(void)
 						  axs->target_auid[i],
 						  axs->target_uid[i],
 						  axs->target_sessionid[i],
-						  axs->target_sid[i],
+						  &axs->target_lsm[i],
 						  axs->target_comm[i]))
 				call_panic = 1;
 	}
@@ -1798,7 +1797,7 @@ static void audit_log_exit(void)
 	    audit_log_pid_context(context, context->target_pid,
 				  context->target_auid, context->target_uid,
 				  context->target_sessionid,
-				  context->target_sid, context->target_comm))
+				  &context->target_lsm, context->target_comm))
 			call_panic = 1;
 
 	if (context->pwd.dentry && context->pwd.mnt) {
@@ -2740,15 +2739,12 @@ int __audit_sockaddr(int len, void *a)
 void __audit_ptrace(struct task_struct *t)
 {
 	struct audit_context *context = audit_context();
-	struct lsmblob blob;
 
 	context->target_pid = task_tgid_nr(t);
 	context->target_auid = audit_get_loginuid(t);
 	context->target_uid = task_uid(t);
 	context->target_sessionid = audit_get_sessionid(t);
-	security_task_getsecid_obj(t, &blob);
-	/* scaffolding - until target_sid is converted */
-	context->target_sid = lsmblob_first(&blob);
+	security_task_getsecid_obj(t, &context->target_lsm);
 	memcpy(context->target_comm, t->comm, TASK_COMM_LEN);
 }
 
@@ -2764,7 +2760,6 @@ int audit_signal_info_syscall(struct task_struct *t)
 	struct audit_aux_data_pids *axp;
 	struct audit_context *ctx = audit_context();
 	kuid_t t_uid = task_uid(t);
-	struct lsmblob blob;
 
 	if (!audit_signals || audit_dummy_context())
 		return 0;
@@ -2776,9 +2771,7 @@ int audit_signal_info_syscall(struct task_struct *t)
 		ctx->target_auid = audit_get_loginuid(t);
 		ctx->target_uid = t_uid;
 		ctx->target_sessionid = audit_get_sessionid(t);
-		security_task_getsecid_obj(t, &blob);
-		/* scaffolding until target_sid is converted */
-		ctx->target_sid = lsmblob_first(&blob);
+		security_task_getsecid_obj(t, &ctx->target_lsm);
 		memcpy(ctx->target_comm, t->comm, TASK_COMM_LEN);
 		return 0;
 	}
@@ -2799,9 +2792,7 @@ int audit_signal_info_syscall(struct task_struct *t)
 	axp->target_auid[axp->pid_count] = audit_get_loginuid(t);
 	axp->target_uid[axp->pid_count] = t_uid;
 	axp->target_sessionid[axp->pid_count] = audit_get_sessionid(t);
-	security_task_getsecid_obj(t, &blob);
-	/* scaffolding until target_sid is converted */
-	axp->target_sid[axp->pid_count] = lsmblob_first(&blob);
+	security_task_getsecid_obj(t, &axp->target_lsm[axp->pid_count]);
 	memcpy(axp->target_comm[axp->pid_count], t->comm, TASK_COMM_LEN);
 	axp->pid_count++;
 
security/integrity/ima/ima_main.c +1 -3
index 25870eb422d9..ecaa0b96bb26 100644
@@ -488,7 +488,6 @@ int ima_file_mprotect(struct vm_area_struct *vma, unsigned long prot)
 int ima_bprm_check(struct linux_binprm *bprm)
 {
 	int ret;
-	u32 secid;
 	struct lsmblob blob;
 
 	security_current_getsecid_subj(&blob);
@@ -497,8 +496,7 @@ int ima_bprm_check(struct linux_binprm *bprm)
 	if (ret)
 		return ret;
 
-	security_cred_getsecid(bprm->cred, &secid);
-	lsmblob_init(&blob, secid);
+	security_cred_getsecid(bprm->cred, &blob);
 	return process_measurement(bprm->file, bprm->cred, &blob, NULL, 0,
 				   MAY_EXEC, CREDS_CHECK);
 }
security/security.c +9 -3
index 563452000729..80133d6e982c 100644
@@ -1829,10 +1829,16 @@ void security_transfer_creds(struct cred *new, const struct cred *old)
 	call_void_hook(cred_transfer, new, old);
 }
 
-void security_cred_getsecid(const struct cred *c, u32 *secid)
+void security_cred_getsecid(const struct cred *c, struct lsmblob *blob)
 {
-	*secid = 0;
-	call_void_hook(cred_getsecid, c, secid);
+	struct security_hook_list *hp;
+
+	lsmblob_init(blob, 0);
+	hlist_for_each_entry(hp, &security_hook_heads.cred_getsecid, list) {
+		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
+			continue;
+		hp->hook.cred_getsecid(c, &blob->secid[hp->lsmid->slot]);
+	}
 }
 EXPORT_SYMBOL(security_cred_getsecid);
 
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#43 lore raw

PATCH v38 20/39 LSM: Specify which LSM to display

In reply to Casey Schaufler

Create two new prctl() options PR_LSM_ATTR_SET and PR_LSM_ATTR_GET which change and report the Interface LSM respectively.

The LSM ID number of an active LSM that supplies hooks for human readable data may be passed in the arg2 value with the PR_LSM_ATTR_SET option. The PR_LSM_ATT_GET option returns the LSM ID currently in use. At this point there can only be one LSM capable of display active. A helper function lsm_task_ilsm() is provided to get the interface lsm slot for a task_struct.

Security modules that wish to restrict this action may provide a task_prctl hook to do so. Each such security module is responsible for defining its policy.

AppArmor hook initially provided by John Johansen <[email protected]>. SELinux hook initially provided by Stephen Smalley <[email protected]>

---
 include/linux/security.h             |  17 ++++
 include/uapi/linux/prctl.h           |   4 +
 security/apparmor/include/apparmor.h |   3 +-
 security/apparmor/lsm.c              |  42 +++++++++
 security/security.c                  | 127 +++++++++++++++++++++++----
 security/selinux/hooks.c             |  21 +++++
 security/selinux/include/classmap.h  |   3 +-
 7 files changed, 198 insertions(+), 19 deletions(-)
include/linux/security.h +17 -0
index 9f80b685542d..8d3b875cd04a 100644
@@ -257,6 +257,23 @@ static inline u32 lsmblob_first(const struct lsmblob *blob)
 #endif
 }
 
+/**
+ * lsm_task_ilsm - the "interface_lsm" for this task
+ * @task: The task to report on
+ *
+ * Returns the task's interface LSM slot.
+ */
+static inline int lsm_task_ilsm(struct task_struct *task)
+{
+#ifdef CONFIG_SECURITY
+	int *ilsm = task->security;
+
+	if (ilsm)
+		return *ilsm;
+#endif
+	return LSMBLOB_INVALID;
+}
+
 /* These functions are in security/commoncap.c */
 extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
 		       int cap, unsigned int opts);
include/uapi/linux/prctl.h +4 -0
index a5e06dcbba13..531c6e8d2d18 100644
@@ -281,6 +281,10 @@ struct prctl_mm_map {
 # define PR_SME_VL_LEN_MASK		0xffff
 # define PR_SME_VL_INHERIT		(1 << 17) /* inherit across exec */
 
+/* Set/get the active security module for /proc/self/attr */
+#define PR_LSM_ATTR_SET			65	/* Set the display LSM ID */
+#define PR_LSM_ATTR_GET			66	/* Get the display LSM ID */
+
 #define PR_SET_VMA		0x53564d41
 # define PR_SET_VMA_ANON_NAME		0
 
security/apparmor/include/apparmor.h +2 -1
index 9c3fc36a0702..c9e08102c96f 100644
@@ -28,8 +28,9 @@
 #define AA_CLASS_SIGNAL		10
 #define AA_CLASS_NET		14
 #define AA_CLASS_LABEL		16
+#define AA_CLASS_DISPLAY_LSM	17
 
-#define AA_CLASS_LAST		AA_CLASS_LABEL
+#define AA_CLASS_LAST		AA_CLASS_DISPLAY_LSM
 
 /* Control parameters settable through module/boot flags */
 extern enum audit_mode aa_g_audit;
security/apparmor/lsm.c +42 -0

60 lines not on this page · raw message

security/security.c +110 -17

233 lines not on this page · raw message

security/selinux/hooks.c +21 -0
index cf89ccaa018d..aad795306bd2 100644
@@ -92,6 +92,7 @@
 #include <linux/fsnotify.h>
 #include <linux/fanotify.h>
 #include <linux/io_uring.h>
+#include <linux/prctl.h>
 #include <uapi/linux/lsm.h>
 
 #include "avc.h"
@@ -6373,6 +6374,24 @@ static int selinux_getprocattr(struct task_struct *p,
 	return error;
 }
 
+static int selinux_task_prctl(int option, unsigned long arg2,
+			      unsigned long arg3, unsigned long arg4,
+			      unsigned long arg5)
+{
+	u32 mysid = current_sid();
+
+	if (option != PR_LSM_ATTR_SET)
+		return -ENOSYS;
+
+	/*
+	 * For setting interface_lsm, we only perform a permission check;
+	 * the actual update to the interface_lsm value is handled by the
+	 * LSM framework.
+	 */
+	return avc_has_perm(&selinux_state, mysid, mysid, SECCLASS_PROCESS2,
+			    PROCESS2__SETINTERFACE_LSM, NULL);
+}
+
 static int selinux_setprocattr(const char *name, void *value, size_t size)
 {
 	struct task_security_struct *tsec;
@@ -6384,6 +6403,7 @@ static int selinux_setprocattr(const char *name, void *value, size_t size)
 	/*
 	 * Basic control over ability to set these attributes at all.
 	 */
+
 	if (!strcmp(name, "exec"))
 		error = avc_has_perm(&selinux_state,
 				     mysid, mysid, SECCLASS_PROCESS,
@@ -7040,6 +7060,7 @@ static struct security_hook_list selinux_hooks[] __lsm_ro_after_init = {
 
 	LSM_HOOK_INIT(ptrace_access_check, selinux_ptrace_access_check),
 	LSM_HOOK_INIT(ptrace_traceme, selinux_ptrace_traceme),
+	LSM_HOOK_INIT(task_prctl, selinux_task_prctl),
 	LSM_HOOK_INIT(capget, selinux_capget),
 	LSM_HOOK_INIT(capset, selinux_capset),
 	LSM_HOOK_INIT(capable, selinux_capable),
security/selinux/include/classmap.h +2 -1
index 1c2f41ff4e55..6b8569347bc0 100644
@@ -53,7 +53,8 @@ const struct security_class_mapping secclass_map[] = {
 	    "execmem", "execstack", "execheap", "setkeycreate",
 	    "setsockcreate", "getrlimit", NULL } },
 	{ "process2",
-	  { "nnp_transition", "nosuid_transition", NULL } },
+	  { "nnp_transition", "nosuid_transition", "setinterface_lsm",
+	    NULL } },
 	{ "system",
 	  { "ipc_info", "syslog_read", "syslog_mod",
 	    "syslog_console", "module_request", "module_load", NULL } },
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
maintainer
#44 lore raw

Re: [PATCH v38 20/39] LSM: Specify which LSM to display

Quoted 20 lines · Casey Schaufler

Create two new prctl() options PR_LSM_ATTR_SET and PR_LSM_ATTR_GET which change and report the Interface LSM respectively.

The LSM ID number of an active LSM that supplies hooks for human readable data may be passed in the arg2 value with the PR_LSM_ATTR_SET option. The PR_LSM_ATT_GET option returns the LSM ID currently in use. At this point there can only be one LSM capable of display active. A helper function lsm_task_ilsm() is provided to get the interface lsm slot for a task_struct.

Security modules that wish to restrict this action may provide a task_prctl hook to do so. Each such security module is responsible for defining its policy.

AppArmor hook initially provided by John Johansen <[email protected]>. SELinux hook initially provided by Stephen Smalley <[email protected]>

---

[...]

Quoted 102 lines
security/security.c +42 -4
index 80133d6e982c..43d2431dbda0 100644
@@ -28,6 +28,7 @@
  #include <linux/backing-dev.h>
  #include <linux/string.h>
  #include <linux/msg.h>
+#include <linux/prctl.h>
  #include <uapi/linux/lsm.h>
  #include <net/flow.h>
  #include <net/sock.h>
@@ -81,7 +82,16 @@ static struct kmem_cache *lsm_file_cache;
  static struct kmem_cache *lsm_inode_cache;
 
  char *lsm_names;
-static struct lsm_blob_sizes blob_sizes __lsm_ro_after_init;
+
+/*
+ * The task blob includes the "interface_lsm" slot used for
+ * chosing which module presents contexts.
+ * Using a long to avoid potential alignment issues with
+ * module assigned task blobs.
+ */
+static struct lsm_blob_sizes blob_sizes __lsm_ro_after_init = {
+	.lbs_task = sizeof(long),
+};
 
  /* Boot-time LSM user choice */
  static __initdata const char *chosen_lsm_order;
@@ -691,6 +701,8 @@ int lsm_inode_alloc(struct inode *inode)
   */
  static int lsm_task_alloc(struct task_struct *task)
  {
+	int *ilsm;
+
  	if (blob_sizes.lbs_task == 0) {
  		task->security = NULL;
  		return 0;
@@ -699,6 +711,15 @@ static int lsm_task_alloc(struct task_struct *task)
  	task->security = kzalloc(blob_sizes.lbs_task, GFP_KERNEL);
  	if (task->security == NULL)
  		return -ENOMEM;
+
+	/*
+	 * The start of the task blob contains the "interface" LSM slot number.
+	 * Start with it set to the invalid slot number, indicating that the
+	 * default first registered LSM be displayed.
+	 */
+	ilsm = task->security;
+	*ilsm = LSMBLOB_INVALID;
+
  	return 0;
  }
 
@@ -1765,14 +1786,26 @@ int security_file_open(struct file *file)
 
  int security_task_alloc(struct task_struct *task, unsigned long clone_flags)
  {
+	int *oilsm = current->security;
+	int *nilsm;
  	int rc = lsm_task_alloc(task);
 
-	if (rc)
+	if (unlikely(rc))
  		return rc;
+
  	rc = call_int_hook(task_alloc, 0, task, clone_flags);
-	if (unlikely(rc))
+	if (unlikely(rc)) {
  		security_task_free(task);
-	return rc;
+		return rc;
+	}
+
+	if (oilsm) {
+		nilsm = task->security;
+		if (nilsm)
+			*nilsm = *oilsm;
+	}
+
+	return 0;
  }
 
  void security_task_free(struct task_struct *task)
@@ -2031,10 +2064,15 @@ int security_task_kill(struct task_struct *p, struct kernel_siginfo *info,
  int security_task_prctl(int option, unsigned long arg2, unsigned long arg3,
  			 unsigned long arg4, unsigned long arg5)
  {
+	int *ilsm = current->security;
  	int thisrc;
+	int slot;
  	int rc = LSM_RET_DEFAULT(task_prctl);
  	struct security_hook_list *hp;
 
+	if (lsm_slot == 0)
+		return -EINVAL;
+
  	hlist_for_each_entry(hp, &security_hook_heads.task_prctl, list) {
  		thisrc = hp->hook.task_prctl(option, arg2, arg3, arg4, arg5);
  		if (thisrc != LSM_RET_DEFAULT(task_prctl)) {

security/security.c int security_task_prctl(int option, unsigned long arg2, unsigned long arg3, · line 2090

Quoted 10 lines
security/security.c +7 -0
@@ -2043,6 +2081,25 @@ int security_task_prctl(int option, unsigned long arg2, unsigned long arg3,
  				break;
  		}
  	}
+
+	switch (option) {
+	case PR_LSM_ATTR_SET:
+		if (rc && rc != LSM_RET_DEFAULT(task_prctl))
+			return rc;
+		for (slot = 0; slot < lsm_slot; slot++)
+			if (lsm_slotlist[slot]->id == arg2) {

This doesn't build if LSMBLOB_ENTRIES == 0

Quoted 15 lines
security/security.c +12 -0
+				*ilsm = lsm_slotlist[slot]->slot;
+				return 0;
+			}
+		return -EINVAL;
+	case PR_LSM_ATTR_GET:
+		if (rc && rc != LSM_RET_DEFAULT(task_prctl))
+			return rc;
+		if (*ilsm != LSMBLOB_INVALID)
+			return lsm_slotlist[*ilsm]->id;
+		return lsm_slotlist[0]->id;
+	}
+
  	return rc;
  }
 
author maintainer
#45 lore raw

PATCH v38 21/39 LSM: Ensure the correct LSM context releaser

In reply to Casey Schaufler

Add a new lsmcontext data structure to hold all the information about a "security context", including the string, its size and which LSM allocated the string. The allocation information is necessary because LSMs have different policies regarding the lifecycle of these strings. SELinux allocates and destroys them on each use, whereas Smack provides a pointer to an entry in a list that never goes away.

To: Pablo Neira Ayuso <[email protected]>
Cc: [email protected]

---
 drivers/android/binder.c                | 10 ++++---
 fs/ceph/xattr.c                         |  6 ++++-
 fs/nfs/nfs4proc.c                       |  8 ++++--
 fs/nfsd/nfs4xdr.c                       |  7 +++--
 include/linux/security.h                | 35 +++++++++++++++++++++++--
 include/net/scm.h                       |  5 +++-
 kernel/audit.c                          | 14 +++++++---
 kernel/auditsc.c                        | 12 ++++++---
 net/ipv4/ip_sockglue.c                  |  4 ++-
 net/netfilter/nf_conntrack_netlink.c    |  4 ++-
 net/netfilter/nf_conntrack_standalone.c |  4 ++-
 net/netfilter/nfnetlink_queue.c         | 13 ++++++---
 net/netlabel/netlabel_unlabeled.c       | 19 +++++++++++---
 net/netlabel/netlabel_user.c            |  4 ++-
 security/security.c                     | 11 ++++----
 15 files changed, 121 insertions(+), 35 deletions(-)
drivers/android/binder.c +7 -3
index 6e1e35de1fcb..12aa3bea59ee 100644
@@ -2898,6 +2898,7 @@ static void binder_transaction(struct binder_proc *proc,
 	int t_debug_id = atomic_inc_return(&binder_last_id);
 	char *secctx = NULL;
 	u32 secctx_sz = 0;
+	struct lsmcontext scaff; /* scaffolding */
 	struct list_head sgc_head;
 	struct list_head pf_head;
 	const void __user *user_buffer = (const void __user *)
@@ -3231,7 +3232,8 @@ static void binder_transaction(struct binder_proc *proc,
 			t->security_ctx = 0;
 			WARN_ON(1);
 		}
-		security_release_secctx(secctx, secctx_sz);
+		lsmcontext_init(&scaff, secctx, secctx_sz, 0);
+		security_release_secctx(&scaff);
 		secctx = NULL;
 	}
 	t->buffer->debug_id = t->debug_id;
@@ -3647,8 +3649,10 @@ static void binder_transaction(struct binder_proc *proc,
 	binder_alloc_free_buf(&target_proc->alloc, t->buffer);
 err_binder_alloc_buf_failed:
 err_bad_extra_size:
-	if (secctx)
-		security_release_secctx(secctx, secctx_sz);
+	if (secctx) {
+		lsmcontext_init(&scaff, secctx, secctx_sz, 0);
+		security_release_secctx(&scaff);
+	}
 err_get_secctx_failed:
 	kfree(tcomplete);
 	binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
fs/ceph/xattr.c +5 -1
index f31350cda960..d943be72dfff 100644
@@ -1395,12 +1395,16 @@ int ceph_security_init_secctx(struct dentry *dentry, umode_t mode,
 
 void ceph_release_acl_sec_ctx(struct ceph_acl_sec_ctx *as_ctx)
 {
+#ifdef CONFIG_CEPH_FS_SECURITY_LABEL
+	struct lsmcontext scaff; /* scaffolding */
+#endif
 #ifdef CONFIG_CEPH_FS_POSIX_ACL
 	posix_acl_release(as_ctx->acl);
 	posix_acl_release(as_ctx->default_acl);
 #endif
 #ifdef CONFIG_CEPH_FS_SECURITY_LABEL
-	security_release_secctx(as_ctx->sec_ctx, as_ctx->sec_ctxlen);
+	lsmcontext_init(&scaff, as_ctx->sec_ctx, as_ctx->sec_ctxlen, 0);
+	security_release_secctx(&scaff);
 #endif
 	if (as_ctx->pagelist)
 		ceph_pagelist_release(as_ctx->pagelist);
fs/nfs/nfs4proc.c +6 -2
index 3ed14a2a84a4..47259990fae1 100644
@@ -133,8 +133,12 @@ nfs4_label_init_security(struct inode *dir, struct dentry *dentry,
 static inline void
 nfs4_label_release_security(struct nfs4_label *label)
 {
-	if (label)
-		security_release_secctx(label->label, label->len);
+	struct lsmcontext scaff; /* scaffolding */
+
+	if (label) {
+		lsmcontext_init(&scaff, label->label, label->len, 0);
+		security_release_secctx(&scaff);
+	}
 }
 static inline u32 *nfs4_bitmask(struct nfs_server *server, struct nfs4_label *label)
 {
fs/nfsd/nfs4xdr.c +5 -2
index 1e9690a061ec..4a96e06f4827 100644
@@ -2848,6 +2848,7 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp,
 	int err;
 	struct nfs4_acl *acl = NULL;
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
+	struct lsmcontext scaff; /* scaffolding */
 	void *context = NULL;
 	int contextlen;
 #endif
@@ -3357,8 +3358,10 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp,
 
 out:
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
-	if (context)
-		security_release_secctx(context, contextlen);
+	if (context) {
+		lsmcontext_init(&scaff, context, contextlen, 0); /*scaffolding*/
+		security_release_secctx(&scaff);
+	}
 #endif /* CONFIG_NFSD_V4_SECURITY_LABEL */
 	kfree(acl);
 	if (tempfh) {
include/linux/security.h +33 -2
index 8d3b875cd04a..a3c11934620a 100644
@@ -154,6 +154,37 @@ extern const char *const lockdown_reasons[LOCKDOWN_CONFIDENTIALITY_MAX+1];
 extern int lsm_id;
 extern struct lsm_id *lsm_idlist[];
 
+/*
+ * A "security context" is the text representation of
+ * the information used by LSMs.
+ * This structure contains the string, its length, and which LSM
+ * it is useful for.
+ */
+struct lsmcontext {
+	char	*context;	/* Provided by the module */
+	u32	len;
+	int	slot;		/* Identifies the module */
+};
+
+/**
+ * lsmcontext_init - initialize an lsmcontext structure.
+ * @cp: Pointer to the context to initialize
+ * @context: Initial context, or NULL
+ * @size: Size of context, or 0
+ * @slot: Which LSM provided the context
+ *
+ * Fill in the lsmcontext from the provided information.
+ * This is a scaffolding function that will be removed when
+ * lsmcontext integration is complete.
+ */
+static inline void lsmcontext_init(struct lsmcontext *cp, char *context,
+				   u32 size, int slot)
+{
+	cp->slot = slot;
+	cp->context = context;
+	cp->len = size;
+}
+
 /*
  * Data exported by the security modules
  *
@@ -607,7 +638,7 @@ int security_ismaclabel(const char *name);
 int security_secid_to_secctx(struct lsmblob *blob, char **secdata, u32 *seclen);
 int security_secctx_to_secid(const char *secdata, u32 seclen,
 			     struct lsmblob *blob);
-void security_release_secctx(char *secdata, u32 seclen);
+void security_release_secctx(struct lsmcontext *cp);
 void security_inode_invalidate_secctx(struct inode *inode);
 int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
 int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
@@ -1478,7 +1509,7 @@ static inline int security_secctx_to_secid(const char *secdata,
 	return -EOPNOTSUPP;
 }
 
-static inline void security_release_secctx(char *secdata, u32 seclen)
+static inline void security_release_secctx(struct lsmcontext *cp)
 {
 }
 
include/net/scm.h +4 -1
index 23a35ff1b3f2..f273c4d777ec 100644
@@ -92,6 +92,7 @@ static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
 #ifdef CONFIG_SECURITY_NETWORK
 static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm)
 {
+	struct lsmcontext context;
 	struct lsmblob lb;
 	char *secdata;
 	u32 seclen;
@@ -106,7 +107,9 @@ static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct sc
 
 		if (!err) {
 			put_cmsg(msg, SOL_SOCKET, SCM_SECURITY, seclen, secdata);
-			security_release_secctx(secdata, seclen);
+			/*scaffolding*/
+			lsmcontext_init(&context, secdata, seclen, 0);
+			security_release_secctx(&context);
 		}
 	}
 }
kernel/audit.c +10 -4
index 3d026013e6eb..d14e54098b9c 100644
@@ -1214,6 +1214,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	struct audit_sig_info   *sig_data;
 	char			*ctx = NULL;
 	u32			len;
+	struct lsmcontext	scaff; /* scaffolding */
 
 	err = audit_netlink_ok(skb, msg_type);
 	if (err)
@@ -1471,15 +1472,18 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 		}
 		sig_data = kmalloc(struct_size(sig_data, ctx, len), GFP_KERNEL);
 		if (!sig_data) {
-			if (lsmblob_is_set(&audit_sig_lsm))
-				security_release_secctx(ctx, len);
+			if (lsmblob_is_set(&audit_sig_lsm)) {
+				lsmcontext_init(&scaff, ctx, len, 0);
+				security_release_secctx(&scaff);
+			}
 			return -ENOMEM;
 		}
 		sig_data->uid = from_kuid(&init_user_ns, audit_sig_uid);
 		sig_data->pid = audit_sig_pid;
 		if (lsmblob_is_set(&audit_sig_lsm)) {
 			memcpy(sig_data->ctx, ctx, len);
-			security_release_secctx(ctx, len);
+			lsmcontext_init(&scaff, ctx, len, 0);
+			security_release_secctx(&scaff);
 		}
 		audit_send_reply(skb, seq, AUDIT_SIGNAL_INFO, 0, 0,
 				 sig_data, struct_size(sig_data, ctx, len));
@@ -2171,6 +2175,7 @@ int audit_log_task_context(struct audit_buffer *ab)
 	unsigned len;
 	int error;
 	struct lsmblob blob;
+	struct lsmcontext scaff; /* scaffolding */
 
 	security_current_getsecid_subj(&blob);
 	if (!lsmblob_is_set(&blob))
@@ -2185,7 +2190,8 @@ int audit_log_task_context(struct audit_buffer *ab)
 	}
 
 	audit_log_format(ab, " subj=%s", ctx);
-	security_release_secctx(ctx, len);
+	lsmcontext_init(&scaff, ctx, len, 0);
+	security_release_secctx(&scaff);
 	return 0;
 
 error_path:
kernel/auditsc.c +9 -3
index 092aba46a9b3..8a16ed2f7206 100644
@@ -1096,6 +1096,7 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 				 struct lsmblob *blob, char *comm)
 {
 	struct audit_buffer *ab;
+	struct lsmcontext lsmcxt;
 	char *ctx = NULL;
 	u32 len;
 	int rc = 0;
@@ -1113,7 +1114,8 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 			rc = 1;
 		} else {
 			audit_log_format(ab, " obj=%s", ctx);
-			security_release_secctx(ctx, len);
+			lsmcontext_init(&lsmcxt, ctx, len, 0); /*scaffolding*/
+			security_release_secctx(&lsmcxt);
 		}
 	}
 	audit_log_format(ab, " ocomm=");
@@ -1373,6 +1375,7 @@ static void audit_log_time(struct audit_context *context, struct audit_buffer **
 
 static void show_special(struct audit_context *context, int *call_panic)
 {
+	struct lsmcontext lsmcxt;
 	struct audit_buffer *ab;
 	int i;
 
@@ -1407,7 +1410,8 @@ static void show_special(struct audit_context *context, int *call_panic)
 				*call_panic = 1;
 			} else {
 				audit_log_format(ab, " obj=%s", ctx);
-				security_release_secctx(ctx, len);
+				lsmcontext_init(&lsmcxt, ctx, len, 0);
+				security_release_secctx(&lsmcxt);
 			}
 		}
 		if (context->ipc.has_perm) {
@@ -1569,6 +1573,7 @@ static void audit_log_name(struct audit_context *context, struct audit_names *n,
 		char *ctx = NULL;
 		u32 len;
 		struct lsmblob blob;
+		struct lsmcontext lsmcxt;
 
 		lsmblob_init(&blob, n->osid);
 		if (security_secid_to_secctx(&blob, &ctx, &len)) {
@@ -1577,7 +1582,8 @@ static void audit_log_name(struct audit_context *context, struct audit_names *n,
 				*call_panic = 2;
 		} else {
 			audit_log_format(ab, " obj=%s", ctx);
-			security_release_secctx(ctx, len);
+			lsmcontext_init(&lsmcxt, ctx, len, 0); /* scaffolding */
+			security_release_secctx(&lsmcxt);
 		}
 	}
 
net/ipv4/ip_sockglue.c +3 -1
index bb8e2af31d4f..030b8c3ffae0 100644
@@ -130,6 +130,7 @@ static void ip_cmsg_recv_checksum(struct msghdr *msg, struct sk_buff *skb,
 
 static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 {
+	struct lsmcontext context;
 	struct lsmblob lb;
 	char *secdata;
 	u32 seclen, secid;
@@ -145,7 +146,8 @@ static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 		return;
 
 	put_cmsg(msg, SOL_IP, SCM_SECURITY, seclen, secdata);
-	security_release_secctx(secdata, seclen);
+	lsmcontext_init(&context, secdata, seclen, 0); /* scaffolding */
+	security_release_secctx(&context);
 }
 
 static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb)
net/netfilter/nf_conntrack_netlink.c +3 -1
index 2e257aa4f61b..2bf2673042f4 100644
@@ -348,6 +348,7 @@ static int ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 	int len, ret;
 	char *secctx;
 	struct lsmblob blob;
+	struct lsmcontext context;
 
 	/* lsmblob_init() puts ct->secmark into all of the secids in blob.
 	 * security_secid_to_secctx() will know which security module
@@ -368,7 +369,8 @@ static int ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 
 	ret = 0;
 nla_put_failure:
-	security_release_secctx(secctx, len);
+	lsmcontext_init(&context, secctx, len, 0); /* scaffolding */
+	security_release_secctx(&context);
 	return ret;
 }
 #else
net/netfilter/nf_conntrack_standalone.c +3 -1
index da61eb8cde76..b0f4349ff88f 100644
@@ -179,6 +179,7 @@ static void ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
 	u32 len;
 	char *secctx;
 	struct lsmblob blob;
+	struct lsmcontext context;
 
 	lsmblob_init(&blob, ct->secmark);
 	ret = security_secid_to_secctx(&blob, &secctx, &len);
@@ -187,7 +188,8 @@ static void ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
 
 	seq_printf(s, "secctx=%s ", secctx);
 
-	security_release_secctx(secctx, len);
+	lsmcontext_init(&context, secctx, len, 0); /* scaffolding */
+	security_release_secctx(&context);
 }
 #else
 static inline void ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
net/netfilter/nfnetlink_queue.c +9 -4
index bc25d49575e4..1416f8b2fc83 100644
@@ -397,6 +397,7 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 	enum ip_conntrack_info ctinfo = 0;
 	const struct nfnl_ct_hook *nfnl_ct;
 	bool csum_verify;
+	struct lsmcontext scaff; /* scaffolding */
 	char *secdata = NULL;
 	u32 seclen = 0;
 	ktime_t tstamp;
@@ -634,8 +635,10 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 	}
 
 	nlh->nlmsg_len = skb->len;
-	if (seclen)
-		security_release_secctx(secdata, seclen);
+	if (seclen) {
+		lsmcontext_init(&scaff, secdata, seclen, 0);
+		security_release_secctx(&scaff);
+	}
 	return skb;
 
 nla_put_failure:
@@ -643,8 +646,10 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 	kfree_skb(skb);
 	net_err_ratelimited("nf_queue: error creating packet message\n");
 nlmsg_failure:
-	if (seclen)
-		security_release_secctx(secdata, seclen);
+	if (seclen) {
+		lsmcontext_init(&scaff, secdata, seclen, 0);
+		security_release_secctx(&scaff);
+	}
 	return NULL;
 }
 
net/netlabel/netlabel_unlabeled.c +15 -4
index 604b9d1dd085..f62b88c85976 100644
@@ -374,6 +374,7 @@ int netlbl_unlhsh_add(struct net *net,
 	struct net_device *dev;
 	struct netlbl_unlhsh_iface *iface;
 	struct audit_buffer *audit_buf = NULL;
+	struct lsmcontext context;
 	char *secctx = NULL;
 	u32 secctx_len;
 	struct lsmblob blob;
@@ -447,7 +448,9 @@ int netlbl_unlhsh_add(struct net *net,
 					     &secctx,
 					     &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
-			security_release_secctx(secctx, secctx_len);
+			/* scaffolding */
+			lsmcontext_init(&context, secctx, secctx_len, 0);
+			security_release_secctx(&context);
 		}
 		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
 		audit_log_end(audit_buf);
@@ -478,6 +481,7 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 	struct netlbl_unlhsh_addr4 *entry;
 	struct audit_buffer *audit_buf;
 	struct net_device *dev;
+	struct lsmcontext context;
 	char *secctx;
 	u32 secctx_len;
 	struct lsmblob blob;
@@ -508,7 +512,9 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 		    security_secid_to_secctx(&blob,
 					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
-			security_release_secctx(secctx, secctx_len);
+			/* scaffolding */
+			lsmcontext_init(&context, secctx, secctx_len, 0);
+			security_release_secctx(&context);
 		}
 		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
@@ -545,6 +551,7 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 	struct netlbl_unlhsh_addr6 *entry;
 	struct audit_buffer *audit_buf;
 	struct net_device *dev;
+	struct lsmcontext context;
 	char *secctx;
 	u32 secctx_len;
 	struct lsmblob blob;
@@ -574,7 +581,8 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 		    security_secid_to_secctx(&blob,
 					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
-			security_release_secctx(secctx, secctx_len);
+			lsmcontext_init(&context, secctx, secctx_len, 0);
+			security_release_secctx(&context);
 		}
 		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
@@ -1093,6 +1101,7 @@ static int netlbl_unlabel_staticlist_gen(u32 cmd,
 	int ret_val = -ENOMEM;
 	struct netlbl_unlhsh_walk_arg *cb_arg = arg;
 	struct net_device *dev;
+	struct lsmcontext context;
 	void *data;
 	u32 secid;
 	char *secctx;
@@ -1163,7 +1172,9 @@ static int netlbl_unlabel_staticlist_gen(u32 cmd,
 			  NLBL_UNLABEL_A_SECCTX,
 			  secctx_len,
 			  secctx);
-	security_release_secctx(secctx, secctx_len);
+	/* scaffolding */
+	lsmcontext_init(&context, secctx, secctx_len, 0);
+	security_release_secctx(&context);
 	if (ret_val != 0)
 		goto list_cb_failure;
 
net/netlabel/netlabel_user.c +3 -1
index 893301ae0131..ef139d8ae7cd 100644
@@ -84,6 +84,7 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 					       struct netlbl_audit *audit_info)
 {
 	struct audit_buffer *audit_buf;
+	struct lsmcontext context;
 	char *secctx;
 	u32 secctx_len;
 	struct lsmblob blob;
@@ -103,7 +104,8 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 	if (audit_info->secid != 0 &&
 	    security_secid_to_secctx(&blob, &secctx, &secctx_len) == 0) {
 		audit_log_format(audit_buf, " subj=%s", secctx);
-		security_release_secctx(secctx, secctx_len);
+		lsmcontext_init(&context, secctx, secctx_len, 0);/*scaffolding*/
+		security_release_secctx(&context);
 	}
 
 	return audit_buf;
security/security.c +6 -5
index 43d2431dbda0..44312b3437da 100644
@@ -2357,16 +2357,17 @@ int security_secctx_to_secid(const char *secdata, u32 seclen,
 }
 EXPORT_SYMBOL(security_secctx_to_secid);
 
-void security_release_secctx(char *secdata, u32 seclen)
+void security_release_secctx(struct lsmcontext *cp)
 {
 	struct security_hook_list *hp;
-	int ilsm = lsm_task_ilsm(current);
 
 	hlist_for_each_entry(hp, &security_hook_heads.release_secctx, list)
-		if (ilsm == LSMBLOB_INVALID || ilsm == hp->lsmid->slot) {
-			hp->hook.release_secctx(secdata, seclen);
-			return;
+		if (cp->slot == hp->lsmid->slot) {
+			hp->hook.release_secctx(cp->context, cp->len);
+			break;
 		}
+
+	memset(cp, 0, sizeof(*cp));
 }
 EXPORT_SYMBOL(security_release_secctx);
 
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#46 lore raw

PATCH v38 22/39 LSM: Use lsmcontext in security_secid_to_secctx

In reply to Casey Schaufler

Replace the (secctx,seclen) pointer pair with a single lsmcontext pointer to allow return of the LSM identifier along with the context and context length. This allows security_release_secctx() to know how to release the context. Callers have been modified to use or save the returned data from the new structure.

security_secid_to_secctx() will now return the length value if the passed lsmcontext pointer is NULL.

---
 drivers/android/binder.c                | 26 ++++++---------
 include/linux/security.h                |  4 +--
 include/net/scm.h                       |  9 ++----
 kernel/audit.c                          | 42 +++++++++++--------------
 kernel/auditsc.c                        | 31 +++++++-----------
 net/ipv4/ip_sockglue.c                  |  8 ++---
 net/netfilter/nf_conntrack_netlink.c    | 18 ++++-------
 net/netfilter/nf_conntrack_standalone.c |  7 ++---
 net/netfilter/nfnetlink_queue.c         |  5 ++-
 net/netlabel/netlabel_unlabeled.c       | 40 +++++++----------------
 net/netlabel/netlabel_user.c            |  7 ++---
 security/security.c                     | 29 +++++++++++++++--
 12 files changed, 99 insertions(+), 127 deletions(-)
drivers/android/binder.c +10 -16
index 12aa3bea59ee..5cfdaec0f9b5 100644
@@ -2896,9 +2896,7 @@ static void binder_transaction(struct binder_proc *proc,
 	binder_size_t last_fixup_min_off = 0;
 	struct binder_context *context = proc->context;
 	int t_debug_id = atomic_inc_return(&binder_last_id);
-	char *secctx = NULL;
-	u32 secctx_sz = 0;
-	struct lsmcontext scaff; /* scaffolding */
+	struct lsmcontext lsmctx = { };
 	struct list_head sgc_head;
 	struct list_head pf_head;
 	const void __user *user_buffer = (const void __user *)
@@ -3174,7 +3172,7 @@ static void binder_transaction(struct binder_proc *proc,
 		size_t added_size;
 
 		security_cred_getsecid(proc->cred, &blob);
-		ret = security_secid_to_secctx(&blob, &secctx, &secctx_sz);
+		ret = security_secid_to_secctx(&blob, &lsmctx);
 		if (ret) {
 			binder_txn_error("%d:%d failed to get security context\n",
 				thread->pid, proc->pid);
@@ -3183,7 +3181,7 @@ static void binder_transaction(struct binder_proc *proc,
 			return_error_line = __LINE__;
 			goto err_get_secctx_failed;
 		}
-		added_size = ALIGN(secctx_sz, sizeof(u64));
+		added_size = ALIGN(lsmctx.len, sizeof(u64));
 		extra_buffers_size += added_size;
 		if (extra_buffers_size < added_size) {
 			binder_txn_error("%d:%d integer overflow of extra_buffers_size\n",
@@ -3217,24 +3215,22 @@ static void binder_transaction(struct binder_proc *proc,
 		t->buffer = NULL;
 		goto err_binder_alloc_buf_failed;
 	}
-	if (secctx) {
+	if (lsmctx.context) {
 		int err;
 		size_t buf_offset = ALIGN(tr->data_size, sizeof(void *)) +
 				    ALIGN(tr->offsets_size, sizeof(void *)) +
 				    ALIGN(extra_buffers_size, sizeof(void *)) -
-				    ALIGN(secctx_sz, sizeof(u64));
+				    ALIGN(lsmctx.len, sizeof(u64));
 
 		t->security_ctx = (uintptr_t)t->buffer->user_data + buf_offset;
 		err = binder_alloc_copy_to_buffer(&target_proc->alloc,
 						  t->buffer, buf_offset,
-						  secctx, secctx_sz);
+						  lsmctx.context, lsmctx.len);
 		if (err) {
 			t->security_ctx = 0;
 			WARN_ON(1);
 		}
-		lsmcontext_init(&scaff, secctx, secctx_sz, 0);
-		security_release_secctx(&scaff);
-		secctx = NULL;
+		security_release_secctx(&lsmctx);
 	}
 	t->buffer->debug_id = t->debug_id;
 	t->buffer->transaction = t;
@@ -3278,7 +3274,7 @@ static void binder_transaction(struct binder_proc *proc,
 	off_end_offset = off_start_offset + tr->offsets_size;
 	sg_buf_offset = ALIGN(off_end_offset, sizeof(void *));
 	sg_buf_end_offset = sg_buf_offset + extra_buffers_size -
-		ALIGN(secctx_sz, sizeof(u64));
+		ALIGN(lsmctx.len, sizeof(u64));
 	off_min = 0;
 	for (buffer_offset = off_start_offset; buffer_offset < off_end_offset;
 	     buffer_offset += sizeof(binder_size_t)) {
@@ -3649,10 +3645,8 @@ static void binder_transaction(struct binder_proc *proc,
 	binder_alloc_free_buf(&target_proc->alloc, t->buffer);
 err_binder_alloc_buf_failed:
 err_bad_extra_size:
-	if (secctx) {
-		lsmcontext_init(&scaff, secctx, secctx_sz, 0);
-		security_release_secctx(&scaff);
-	}
+	if (lsmctx.context)
+		security_release_secctx(&lsmctx);
 err_get_secctx_failed:
 	kfree(tcomplete);
 	binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
include/linux/security.h +2 -2
index a3c11934620a..bb548f71a824 100644
@@ -635,7 +635,7 @@ int security_getprocattr(struct task_struct *p, int lsmid, char *name,
 int security_setprocattr(int lsmid, const char *name, void *value, size_t size);
 int security_netlink_send(struct sock *sk, struct sk_buff *skb);
 int security_ismaclabel(const char *name);
-int security_secid_to_secctx(struct lsmblob *blob, char **secdata, u32 *seclen);
+int security_secid_to_secctx(struct lsmblob *blob, struct lsmcontext *cp);
 int security_secctx_to_secid(const char *secdata, u32 seclen,
 			     struct lsmblob *blob);
 void security_release_secctx(struct lsmcontext *cp);
@@ -1497,7 +1497,7 @@ static inline int security_ismaclabel(const char *name)
 }
 
 static inline int security_secid_to_secctx(struct lsmblob *blob,
-					   char **secdata, u32 *seclen)
+					   struct lsmcontext *cp)
 {
 	return -EOPNOTSUPP;
 }
include/net/scm.h +3 -6
index f273c4d777ec..b77a52f93389 100644
@@ -94,8 +94,6 @@ static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct sc
 {
 	struct lsmcontext context;
 	struct lsmblob lb;
-	char *secdata;
-	u32 seclen;
 	int err;
 
 	if (test_bit(SOCK_PASSSEC, &sock->flags)) {
@@ -103,12 +101,11 @@ static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct sc
 		 * and the infrastructure will know which it is.
 		 */
 		lsmblob_init(&lb, scm->secid);
-		err = security_secid_to_secctx(&lb, &secdata, &seclen);
+		err = security_secid_to_secctx(&lb, &context);
 
 		if (!err) {
-			put_cmsg(msg, SOL_SOCKET, SCM_SECURITY, seclen, secdata);
-			/*scaffolding*/
-			lsmcontext_init(&context, secdata, seclen, 0);
+			put_cmsg(msg, SOL_SOCKET, SCM_SECURITY, context.len,
+				 context.context);
 			security_release_secctx(&context);
 		}
 	}
kernel/audit.c +18 -24

86 lines not on this page · raw message

kernel/auditsc.c +11 -20
index 8a16ed2f7206..c3d4617d31c7 100644
@@ -1096,9 +1096,7 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 				 struct lsmblob *blob, char *comm)
 {
 	struct audit_buffer *ab;
-	struct lsmcontext lsmcxt;
-	char *ctx = NULL;
-	u32 len;
+	struct lsmcontext lsmctx;
 	int rc = 0;
 
 	ab = audit_log_start(context, GFP_KERNEL, AUDIT_OBJ_PID);
@@ -1109,13 +1107,12 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 			 from_kuid(&init_user_ns, auid),
 			 from_kuid(&init_user_ns, uid), sessionid);
 	if (lsmblob_is_set(blob)) {
-		if (security_secid_to_secctx(blob, &ctx, &len)) {
+		if (security_secid_to_secctx(blob, &lsmctx)) {
 			audit_log_format(ab, " obj=(none)");
 			rc = 1;
 		} else {
-			audit_log_format(ab, " obj=%s", ctx);
-			lsmcontext_init(&lsmcxt, ctx, len, 0); /*scaffolding*/
-			security_release_secctx(&lsmcxt);
+			audit_log_format(ab, " obj=%s", lsmctx.context);
+			security_release_secctx(&lsmctx);
 		}
 	}
 	audit_log_format(ab, " ocomm=");
@@ -1375,7 +1372,6 @@ static void audit_log_time(struct audit_context *context, struct audit_buffer **
 
 static void show_special(struct audit_context *context, int *call_panic)
 {
-	struct lsmcontext lsmcxt;
 	struct audit_buffer *ab;
 	int i;
 
@@ -1400,17 +1396,15 @@ static void show_special(struct audit_context *context, int *call_panic)
 				 from_kgid(&init_user_ns, context->ipc.gid),
 				 context->ipc.mode);
 		if (osid) {
-			char *ctx = NULL;
-			u32 len;
+			struct lsmcontext lsmcxt;
 			struct lsmblob blob;
 
 			lsmblob_init(&blob, osid);
-			if (security_secid_to_secctx(&blob, &ctx, &len)) {
+			if (security_secid_to_secctx(&blob, &lsmcxt)) {
 				audit_log_format(ab, " osid=%u", osid);
 				*call_panic = 1;
 			} else {
-				audit_log_format(ab, " obj=%s", ctx);
-				lsmcontext_init(&lsmcxt, ctx, len, 0);
+				audit_log_format(ab, " obj=%s", lsmcxt.context);
 				security_release_secctx(&lsmcxt);
 			}
 		}
@@ -1570,20 +1564,17 @@ static void audit_log_name(struct audit_context *context, struct audit_names *n,
 				 MAJOR(n->rdev),
 				 MINOR(n->rdev));
 	if (n->osid != 0) {
-		char *ctx = NULL;
-		u32 len;
 		struct lsmblob blob;
-		struct lsmcontext lsmcxt;
+		struct lsmcontext lsmctx;
 
 		lsmblob_init(&blob, n->osid);
-		if (security_secid_to_secctx(&blob, &ctx, &len)) {
+		if (security_secid_to_secctx(&blob, &lsmctx)) {
 			audit_log_format(ab, " osid=%u", n->osid);
 			if (call_panic)
 				*call_panic = 2;
 		} else {
-			audit_log_format(ab, " obj=%s", ctx);
-			lsmcontext_init(&lsmcxt, ctx, len, 0); /* scaffolding */
-			security_release_secctx(&lsmcxt);
+			audit_log_format(ab, " obj=%s", lsmctx.context);
+			security_release_secctx(&lsmctx);
 		}
 	}
 
net/ipv4/ip_sockglue.c +3 -5
index 030b8c3ffae0..ec3ef548264d 100644
@@ -132,8 +132,7 @@ static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 {
 	struct lsmcontext context;
 	struct lsmblob lb;
-	char *secdata;
-	u32 seclen, secid;
+	u32 secid;
 	int err;
 
 	err = security_socket_getpeersec_dgram(NULL, skb, &secid);
@@ -141,12 +140,11 @@ static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 		return;
 
 	lsmblob_init(&lb, secid);
-	err = security_secid_to_secctx(&lb, &secdata, &seclen);
+	err = security_secid_to_secctx(&lb, &context);
 	if (err)
 		return;
 
-	put_cmsg(msg, SOL_IP, SCM_SECURITY, seclen, secdata);
-	lsmcontext_init(&context, secdata, seclen, 0); /* scaffolding */
+	put_cmsg(msg, SOL_IP, SCM_SECURITY, context.len, context.context);
 	security_release_secctx(&context);
 }
 
net/netfilter/nf_conntrack_netlink.c +6 -12
index 2bf2673042f4..93855cd7ce4b 100644
@@ -345,8 +345,7 @@ static int ctnetlink_dump_mark(struct sk_buff *skb, const struct nf_conn *ct)
 static int ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 {
 	struct nlattr *nest_secctx;
-	int len, ret;
-	char *secctx;
+	int ret;
 	struct lsmblob blob;
 	struct lsmcontext context;
 
@@ -354,7 +353,7 @@ static int ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 	 * security_secid_to_secctx() will know which security module
 	 * to use to create the secctx.  */
 	lsmblob_init(&blob, ct->secmark);
-	ret = security_secid_to_secctx(&blob, &secctx, &len);
+	ret = security_secid_to_secctx(&blob, &context);
 	if (ret)
 		return 0;
 
@@ -363,13 +362,12 @@ static int ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 	if (!nest_secctx)
 		goto nla_put_failure;
 
-	if (nla_put_string(skb, CTA_SECCTX_NAME, secctx))
+	if (nla_put_string(skb, CTA_SECCTX_NAME, context.context))
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_secctx);
 
 	ret = 0;
 nla_put_failure:
-	lsmcontext_init(&context, secctx, len, 0); /* scaffolding */
 	security_release_secctx(&context);
 	return ret;
 }
@@ -662,15 +660,11 @@ static inline size_t ctnetlink_acct_size(const struct nf_conn *ct)
 static inline int ctnetlink_secctx_size(const struct nf_conn *ct)
 {
 #ifdef CONFIG_NF_CONNTRACK_SECMARK
-	int len, ret;
+	int len;
 	struct lsmblob blob;
 
-	/* lsmblob_init() puts ct->secmark into all of the secids in blob.
-	 * security_secid_to_secctx() will know which security module
-	 * to use to create the secctx.  */
-	lsmblob_init(&blob, ct->secmark);
-	ret = security_secid_to_secctx(&blob, NULL, &len);
-	if (ret)
+	len = security_secid_to_secctx(&blob, NULL);
+	if (len <= 0)
 		return 0;
 
 	return nla_total_size(0) /* CTA_SECCTX */
net/netfilter/nf_conntrack_standalone.c +2 -5
index b0f4349ff88f..b5b301f5b3f7 100644
@@ -176,19 +176,16 @@ static void ct_seq_stop(struct seq_file *s, void *v)
 static void ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
 {
 	int ret;
-	u32 len;
-	char *secctx;
 	struct lsmblob blob;
 	struct lsmcontext context;
 
 	lsmblob_init(&blob, ct->secmark);
-	ret = security_secid_to_secctx(&blob, &secctx, &len);
+	ret = security_secid_to_secctx(&blob, &context);
 	if (ret)
 		return;
 
-	seq_printf(s, "secctx=%s ", secctx);
+	seq_printf(s, "secctx=%s ", context.context);
 
-	lsmcontext_init(&context, secctx, len, 0); /* scaffolding */
 	security_release_secctx(&context);
 }
 #else
net/netfilter/nfnetlink_queue.c +4 -1
index 1416f8b2fc83..46f49cd2543d 100644
@@ -306,6 +306,7 @@ static u32 nfqnl_get_sk_secctx(struct sk_buff *skb, char **secdata)
 	u32 seclen = 0;
 #if IS_ENABLED(CONFIG_NETWORK_SECMARK)
 	struct lsmblob blob;
+	struct lsmcontext context = { };
 
 	if (!skb || !sk_fullsock(skb->sk))
 		return 0;
@@ -317,10 +318,12 @@ static u32 nfqnl_get_sk_secctx(struct sk_buff *skb, char **secdata)
 		 * blob. security_secid_to_secctx() will know which security
 		 * module to use to create the secctx.  */
 		lsmblob_init(&blob, skb->secmark);
-		security_secid_to_secctx(&blob, secdata, &seclen);
+		security_secid_to_secctx(&blob, &context);
+		*secdata = context.context;
 	}
 
 	read_unlock_bh(&skb->sk->sk_callback_lock);
+	seclen = context.len;
 #endif
 	return seclen;
 }
net/netlabel/netlabel_unlabeled.c +12 -28
index f62b88c85976..744857eac2f8 100644
@@ -375,8 +375,6 @@ int netlbl_unlhsh_add(struct net *net,
 	struct netlbl_unlhsh_iface *iface;
 	struct audit_buffer *audit_buf = NULL;
 	struct lsmcontext context;
-	char *secctx = NULL;
-	u32 secctx_len;
 	struct lsmblob blob;
 
 	if (addr_len != sizeof(struct in_addr) &&
@@ -444,12 +442,9 @@ int netlbl_unlhsh_add(struct net *net,
 		 * security_secid_to_secctx() will know which security module
 		 * to use to create the secctx.  */
 		lsmblob_init(&blob, secid);
-		if (security_secid_to_secctx(&blob,
-					     &secctx,
-					     &secctx_len) == 0) {
-			audit_log_format(audit_buf, " sec_obj=%s", secctx);
-			/* scaffolding */
-			lsmcontext_init(&context, secctx, secctx_len, 0);
+		if (security_secid_to_secctx(&blob, &context) == 0) {
+			audit_log_format(audit_buf, " sec_obj=%s",
+					 context.context);
 			security_release_secctx(&context);
 		}
 		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
@@ -482,8 +477,6 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 	struct audit_buffer *audit_buf;
 	struct net_device *dev;
 	struct lsmcontext context;
-	char *secctx;
-	u32 secctx_len;
 	struct lsmblob blob;
 
 	spin_lock(&netlbl_unlhsh_lock);
@@ -509,11 +502,9 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 		if (entry != NULL)
 			lsmblob_init(&blob, entry->secid);
 		if (entry != NULL &&
-		    security_secid_to_secctx(&blob,
-					     &secctx, &secctx_len) == 0) {
-			audit_log_format(audit_buf, " sec_obj=%s", secctx);
-			/* scaffolding */
-			lsmcontext_init(&context, secctx, secctx_len, 0);
+		    security_secid_to_secctx(&blob, &context) == 0) {
+			audit_log_format(audit_buf, " sec_obj=%s",
+					 context.context);
 			security_release_secctx(&context);
 		}
 		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
@@ -552,8 +543,6 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 	struct audit_buffer *audit_buf;
 	struct net_device *dev;
 	struct lsmcontext context;
-	char *secctx;
-	u32 secctx_len;
 	struct lsmblob blob;
 
 	spin_lock(&netlbl_unlhsh_lock);
@@ -578,10 +567,9 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 		if (entry != NULL)
 			lsmblob_init(&blob, entry->secid);
 		if (entry != NULL &&
-		    security_secid_to_secctx(&blob,
-					     &secctx, &secctx_len) == 0) {
-			audit_log_format(audit_buf, " sec_obj=%s", secctx);
-			lsmcontext_init(&context, secctx, secctx_len, 0);
+		    security_secid_to_secctx(&blob, &context) == 0) {
+			audit_log_format(audit_buf, " sec_obj=%s",
+					 context.context);
 			security_release_secctx(&context);
 		}
 		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
@@ -1104,8 +1092,6 @@ static int netlbl_unlabel_staticlist_gen(u32 cmd,
 	struct lsmcontext context;
 	void *data;
 	u32 secid;
-	char *secctx;
-	u32 secctx_len;
 	struct lsmblob blob;
 
 	data = genlmsg_put(cb_arg->skb, NETLINK_CB(cb_arg->nl_cb->skb).portid,
@@ -1165,15 +1151,13 @@ static int netlbl_unlabel_staticlist_gen(u32 cmd,
 	 * security_secid_to_secctx() will know which security module
 	 * to use to create the secctx.  */
 	lsmblob_init(&blob, secid);
-	ret_val = security_secid_to_secctx(&blob, &secctx, &secctx_len);
+	ret_val = security_secid_to_secctx(&blob, &context);
 	if (ret_val != 0)
 		goto list_cb_failure;
 	ret_val = nla_put(cb_arg->skb,
 			  NLBL_UNLABEL_A_SECCTX,
-			  secctx_len,
-			  secctx);
-	/* scaffolding */
-	lsmcontext_init(&context, secctx, secctx_len, 0);
+			  context.len,
+			  context.context);
 	security_release_secctx(&context);
 	if (ret_val != 0)
 		goto list_cb_failure;
net/netlabel/netlabel_user.c +2 -5
index ef139d8ae7cd..951ba0639d20 100644
@@ -85,8 +85,6 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 {
 	struct audit_buffer *audit_buf;
 	struct lsmcontext context;
-	char *secctx;
-	u32 secctx_len;
 	struct lsmblob blob;
 
 	if (audit_enabled == AUDIT_OFF)
@@ -102,9 +100,8 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 
 	lsmblob_init(&blob, audit_info->secid);
 	if (audit_info->secid != 0 &&
-	    security_secid_to_secctx(&blob, &secctx, &secctx_len) == 0) {
-		audit_log_format(audit_buf, " subj=%s", secctx);
-		lsmcontext_init(&context, secctx, secctx_len, 0);/*scaffolding*/
+	    security_secid_to_secctx(&blob, &context) == 0) {
+		audit_log_format(audit_buf, " subj=%s", context.context);
 		security_release_secctx(&context);
 	}
 
security/security.c +26 -3
index 44312b3437da..cae35e5767ec 100644
@@ -2321,18 +2321,41 @@ int security_ismaclabel(const char *name)
 }
 EXPORT_SYMBOL(security_ismaclabel);
 
-int security_secid_to_secctx(struct lsmblob *blob, char **secdata, u32 *seclen)
+/**
+ * security_secid_to_secctx - convert secid to secctx
+ * @blob: set of secids
+ * @cp: lsm context into which result is put
+ *
+ * Translate secid information into a secctx string.
+ * Return a negative value on error.
+ * If cp is NULL return the length of the string.
+ * Otherwise, return 0.
+ */
+int security_secid_to_secctx(struct lsmblob *blob, struct lsmcontext *cp)
 {
 	struct security_hook_list *hp;
 	int ilsm = lsm_task_ilsm(current);
 
+	if (cp)
+		memset(cp, 0, sizeof(*cp));
+
 	hlist_for_each_entry(hp, &security_hook_heads.secid_to_secctx, list) {
 		if (WARN_ON(hp->lsmid->slot < 0 || hp->lsmid->slot >= lsm_slot))
 			continue;
-		if (ilsm == LSMBLOB_INVALID || ilsm == hp->lsmid->slot)
+		if (ilsm == LSMBLOB_INVALID || ilsm == hp->lsmid->slot) {
+			if (!cp) {
+				int len;
+				int rc;
+				rc = hp->hook.secid_to_secctx(
+					blob->secid[hp->lsmid->slot],
+					NULL, &len);
+				return rc ? rc : len;
+			}
+			cp->slot = hp->lsmid->slot;
 			return hp->hook.secid_to_secctx(
 					blob->secid[hp->lsmid->slot],
-					secdata, seclen);
+					&cp->context, &cp->len);
+		}
 	}
 
 	return LSM_RET_DEFAULT(secid_to_secctx);
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit
author maintainer
#47 lore raw

PATCH v38 23/39 LSM: Use lsmcontext in security_inode_getsecctx

In reply to Casey Schaufler

Change the security_inode_getsecctx() interface to fill a lsmcontext structure instead of data and length pointers. This provides the information about which LSM created the context so that security_release_secctx() can use the correct hook.

---
 fs/nfsd/nfs4xdr.c        | 23 +++++++++--------------
 include/linux/security.h |  5 +++--
 security/security.c      | 13 +++++++++++--
 3 files changed, 23 insertions(+), 18 deletions(-)
fs/nfsd/nfs4xdr.c +9 -14
index 4a96e06f4827..515ea278a200 100644
@@ -2732,11 +2732,11 @@ nfsd4_encode_layout_types(struct xdr_stream *xdr, u32 layout_types)
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
 static inline __be32
 nfsd4_encode_security_label(struct xdr_stream *xdr, struct svc_rqst *rqstp,
-			    void *context, int len)
+			    struct lsmcontext *context)
 {
 	__be32 *p;
 
-	p = xdr_reserve_space(xdr, len + 4 + 4 + 4);
+	p = xdr_reserve_space(xdr, context->len + 4 + 4 + 4);
 	if (!p)
 		return nfserr_resource;
 
@@ -2746,13 +2746,13 @@ nfsd4_encode_security_label(struct xdr_stream *xdr, struct svc_rqst *rqstp,
 	 */
 	*p++ = cpu_to_be32(0); /* lfs */
 	*p++ = cpu_to_be32(0); /* pi */
-	p = xdr_encode_opaque(p, context, len);
+	p = xdr_encode_opaque(p, context->context, context->len);
 	return 0;
 }
 #else
 static inline __be32
 nfsd4_encode_security_label(struct xdr_stream *xdr, struct svc_rqst *rqstp,
-			    void *context, int len)
+			    struct lsmcontext *context)
 { return 0; }
 #endif
 
@@ -2848,9 +2848,7 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp,
 	int err;
 	struct nfs4_acl *acl = NULL;
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
-	struct lsmcontext scaff; /* scaffolding */
-	void *context = NULL;
-	int contextlen;
+	struct lsmcontext context = { };
 #endif
 	bool contextsupport = false;
 	struct nfsd4_compoundres *resp = rqstp->rq_resp;
@@ -2911,7 +2909,7 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp,
 	     bmval0 & FATTR4_WORD0_SUPPORTED_ATTRS) {
 		if (exp->ex_flags & NFSEXP_SECURITY_LABEL)
 			err = security_inode_getsecctx(d_inode(dentry),
-						&context, &contextlen);
+						       &context);
 		else
 			err = -EOPNOTSUPP;
 		contextsupport = (err == 0);
@@ -3337,8 +3335,7 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp,
 
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
 	if (bmval2 & FATTR4_WORD2_SECURITY_LABEL) {
-		status = nfsd4_encode_security_label(xdr, rqstp, context,
-								contextlen);
+		status = nfsd4_encode_security_label(xdr, rqstp, &context);
 		if (status)
 			goto out;
 	}
@@ -3358,10 +3355,8 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp,
 
 out:
 #ifdef CONFIG_NFSD_V4_SECURITY_LABEL
-	if (context) {
-		lsmcontext_init(&scaff, context, contextlen, 0); /*scaffolding*/
-		security_release_secctx(&scaff);
-	}
+	if (context.context)
+		security_release_secctx(&context);
 #endif /* CONFIG_NFSD_V4_SECURITY_LABEL */
 	kfree(acl);
 	if (tempfh) {
include/linux/security.h +3 -2
index bb548f71a824..be935b8d7df5 100644
@@ -642,7 +642,7 @@ void security_release_secctx(struct lsmcontext *cp);
 void security_inode_invalidate_secctx(struct inode *inode);
 int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
 int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
-int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
+int security_inode_getsecctx(struct inode *inode, struct lsmcontext *cp);
 int security_locked_down(enum lockdown_reason what);
 #else /* CONFIG_SECURITY */
 
@@ -1525,7 +1525,8 @@ static inline int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32
 {
 	return -EOPNOTSUPP;
 }
-static inline int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+static inline int security_inode_getsecctx(struct inode *inode,
+					   struct lsmcontext *cp)
 {
 	return -EOPNOTSUPP;
 }
security/security.c +11 -2
index cae35e5767ec..d57554ce386a 100644
@@ -2412,9 +2412,18 @@ int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
 }
 EXPORT_SYMBOL(security_inode_setsecctx);
 
-int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+int security_inode_getsecctx(struct inode *inode, struct lsmcontext *cp)
 {
-	return call_int_hook(inode_getsecctx, -EOPNOTSUPP, inode, ctx, ctxlen);
+	struct security_hook_list *hp;
+
+	memset(cp, 0, sizeof(*cp));
+
+	hlist_for_each_entry(hp, &security_hook_heads.inode_getsecctx, list) {
+		cp->slot = hp->lsmid->slot;
+		return hp->hook.inode_getsecctx(inode, (void **)&cp->context,
+						&cp->len);
+	}
+	return -EOPNOTSUPP;
 }
 EXPORT_SYMBOL(security_inode_getsecctx);
 
Signature · 6 lines
2.37.3

--
Linux-audit mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/linux-audit