Skip to contentSkip to conversation

Add input_supply support in gpio_regulator_config

PATCH In review Jerome Neanne 2 participants 4 messages Sep 29, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Add input_supply support in gpio_regulator_config

This is simillar needs and implementation as fixed-regulator. Used to extract regulator parent from the device tree.

Provide implementation and bindings for vin-supply property.

Jerome Neanne (2):
regulator: gpio: Add input_supply support in gpio_regulator_config
dt-bindings: gpio-regulator: add vin-supply property support

 .../bindings/regulator/gpio-regulator.yaml        |  3 +++
 drivers/regulator/gpio-regulator.c                | 15 +++++++++++++++
 include/linux/regulator/gpio-regulator.h          |  2 ++
 3 files changed, 20 insertions(+)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/2 regulator: gpio: Add input_supply support in gpio_regulator_config

This is simillar as fixed-regulator.
Used to extract regulator parent from the device tree.

Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.

---
 drivers/regulator/gpio-regulator.c       | 15 +++++++++++++++
 include/linux/regulator/gpio-regulator.h |  2 ++
 2 files changed, 17 insertions(+)
drivers/regulator/gpio-regulator.c +15 -0
index 5927d4f3ea..95e61a2f43 100644
@@ -220,6 +220,9 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
 				 regtype);
 	}
 
+	if (of_find_property(np, "vin-supply", NULL))
+		config->input_supply = "vin";
+
 	return config;
 }
 
@@ -259,6 +262,18 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 
 	drvdata->gpiods = devm_kzalloc(dev, sizeof(struct gpio_desc *),
 				       GFP_KERNEL);
+
+	if (config->input_supply) {
+		drvdata->desc.supply_name = devm_kstrdup(&pdev->dev,
+							 config->input_supply,
+							 GFP_KERNEL);
+		if (!drvdata->desc.supply_name) {
+			dev_err(&pdev->dev,
+				"Failed to allocate input supply\n");
+			return -ENOMEM;
+		}
+	}
+
 	if (!drvdata->gpiods)
 		return -ENOMEM;
 	for (i = 0; i < config->ngpios; i++) {
include/linux/regulator/gpio-regulator.h +2 -0
index fdeb312cda..c223e50ff9 100644
@@ -42,6 +42,7 @@ struct gpio_regulator_state {
 /**
  * struct gpio_regulator_config - config structure
  * @supply_name:	Name of the regulator supply
+ * @input_supply:	Name of the input regulator supply
  * @enabled_at_boot:	Whether regulator has been enabled at
  *			boot or not. 1 = Yes, 0 = No
  *			This is used to keep the regulator at
@@ -62,6 +63,7 @@ struct gpio_regulator_state {
  */
 struct gpio_regulator_config {
 	const char *supply_name;
+	const char *input_supply;
 
 	unsigned enabled_at_boot:1;
 	unsigned startup_delay;
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/2 dt-bindings: gpio-regulator: add vin-supply property support

In reply to Jerome Neanne

This is same scheme as fixed-regulator.

Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.

---
 .../devicetree/bindings/regulator/gpio-regulator.yaml          | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +3 -0
index f7e3d8fd3b..6c3371d706 100644
@@ -85,6 +85,9 @@ properties:
       - current
     default: voltage
 
+  vin-supply:
+    description: Input supply phandle.
+
 required:
   - compatible
   - regulator-name
Signature · 1 line
2.17.1
maintainer
#3 lore raw
In reply to Jerome Neanne
Quoted 10 lines · Jerome Neanne

This is simillar needs and implementation as fixed-regulator. Used to extract regulator parent from the device tree.

Provide implementation and bindings for vin-supply property.

Jerome Neanne (2):
regulator: gpio: Add input_supply support in gpio_regulator_config
dt-bindings: gpio-regulator: add vin-supply property support

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: gpio: Add input_supply support in gpio_regulator_config

      commit: adfdfcbdbd32b356323a3db6d3a683270051a7e6
[2/2] dt-bindings: gpio-regulator: add vin-supply property support
      commit: 392cc0a4a0c4b25534f3148b192f18be468f67bd

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark