Documentation: update urls to Linux Foundation wiki
Subsystems (5)
PATCH 1/1 Documentation: update urls to Linux Foundation wiki
The redirects from the old urls stopped working recently.
--- Documentation/networking/bridge.rst | 2 +- Documentation/networking/dccp.rst | 4 ++-- .../networking/device_drivers/ethernet/intel/ice.rst | 2 +- Documentation/networking/generic_netlink.rst | 2 +- MAINTAINERS | 2 +- net/ipv4/Kconfig | 2 +- net/sched/Kconfig | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-)
Documentation/networking/bridge.rst +1 -1
@@ -8,7 +8,7 @@ In order to use the Ethernet bridging functionality, you'll need the userspace tools. Documentation for Linux bridging is on: - http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge + https://wiki.linuxfoundation.org/networking/bridge The bridge-utilities are maintained at: git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/bridge-utils.git
Documentation/networking/dccp.rst +2 -2
@@ -41,11 +41,11 @@ specified in RFCs 4340...42. The known bugs are at: - http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP + https://wiki.linuxfoundation.org/networking/todo#dccp For more up-to-date versions of the DCCP implementation, please consider using the experimental DCCP test tree; instructions for checking this out are on: -http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree +https://wiki.linuxfoundation.org/networking/dccp_testing#experimental_dccp_source_tree Socket options
Documentation/networking/device_drivers/ethernet/intel/ice.rst +1 -1
@@ -819,7 +819,7 @@ NAPI ---- This driver supports NAPI (Rx polling mode). For more information on NAPI, see -https://www.linuxfoundation.org/collaborate/workgroups/networking/napi +https://wiki.linuxfoundation.org/networking/napi MACVLAN
Documentation/networking/generic_netlink.rst +1 -1
@@ -6,4 +6,4 @@ Generic Netlink A wiki document on how to use Generic Netlink can be found here: - * http://www.linuxfoundation.org/collaborate/workgroups/networking/generic_netlink_howto + * https://wiki.linuxfoundation.org/networking/generic_netlink_howto
MAINTAINERS +1 -1
@@ -5717,7 +5717,7 @@ F: drivers/scsi/dc395x.* DCCP PROTOCOL L: [email protected] S: Orphan -W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp +W: https://wiki.linuxfoundation.org/networking/dccp F: include/linux/dccp.h F: include/linux/tfrc.h F: include/uapi/linux/dccp.h
net/ipv4/Kconfig +1 -1
@@ -419,7 +419,7 @@ config INET_DIAG native Linux tools such as ss. ss is included in iproute2, currently downloadable at: - http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 + https://wiki.linuxfoundation.org/networking/iproute2 If unsure, say Y.
net/sched/Kconfig +1 -1
@@ -26,7 +26,7 @@ menuconfig NET_SCHED from the package iproute2+tc at <https://www.kernel.org/pub/linux/utils/net/iproute2/>. That package also contains some documentation; for more, check out - <http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2>. + <https://wiki.linuxfoundation.org/networking/iproute2>. This Quality of Service (QoS) support will enable you to use Differentiated Services (diffserv) and Resource Reservation Protocol
Signature · 1 line
2.37.3
Jonathan Corbet
maintainerQuoted 3 lines · Jouke Witteveen
The redirects from the old urls stopped working recently.
Signed-off-by Jouke Witteveen <[email protected]>
I see the LF has done its annual web-site replacement; I have no idea why they are so enamored with breaking URLs...
Anyway, This is networking documentation, so it should go to the folks at netdev [CC'd] rather than me.
Quoted 14 lines
Documentation/networking/bridge.rst | 2 +- Documentation/networking/dccp.rst | 4 ++-- .../networking/device_drivers/ethernet/intel/ice.rst | 2 +- Documentation/networking/generic_netlink.rst | 2 +- MAINTAINERS | 2 +- net/ipv4/Kconfig | 2 +- net/sched/Kconfig | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-)Documentation/networking/bridge.rst +0
-0
Documentation/networking/bridge.rst In order to use the Ethernet bridging functionality, you'll need the · line 11
Quoted 5 lines
Documentation/networking/bridge.rst +1
-1@@ -8,7 +8,7 @@ In order to use the Ethernet bridging functionality, you'll need the userspace tools. Documentation for Linux bridging is on: - http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge + https://wiki.linuxfoundation.org/networking/bridge
So this page is full of encouraging stuff like:
Quoted 2 lines
The code is updated as part of the 2.4 and 2.6 kernels available at kernel.org.
...and tells us about an encouraging prototype implementation in 2.6.18. I'd apply the patch because working URLs are better than broken ones, but I also question the value of this material at all in 2022... there should be better documents to link to at this point?
Thanks,
jon
Quoted 84 lines
The bridge-utilities are maintained at:
git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/bridge-utils.gitDocumentation/networking/dccp.rst +2
-2@@ -41,11 +41,11 @@ specified in RFCs 4340...42. The known bugs are at: - http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP + https://wiki.linuxfoundation.org/networking/todo#dccp For more up-to-date versions of the DCCP implementation, please consider using the experimental DCCP test tree; instructions for checking this out are on: -http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree +https://wiki.linuxfoundation.org/networking/dccp_testing#experimental_dccp_source_tree Socket optionsDocumentation/networking/device_drivers/ethernet/intel/ice.rst +1
-1@@ -819,7 +819,7 @@ NAPI ---- This driver supports NAPI (Rx polling mode). For more information on NAPI, see -https://www.linuxfoundation.org/collaborate/workgroups/networking/napi +https://wiki.linuxfoundation.org/networking/napi MACVLANDocumentation/networking/generic_netlink.rst +1
-1@@ -6,4 +6,4 @@ Generic Netlink A wiki document on how to use Generic Netlink can be found here: - * http://www.linuxfoundation.org/collaborate/workgroups/networking/generic_netlink_howto + * https://wiki.linuxfoundation.org/networking/generic_netlink_howtoMAINTAINERS +1
-1@@ -5717,7 +5717,7 @@ F: drivers/scsi/dc395x.* DCCP PROTOCOL L: [email protected] S: Orphan -W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp +W: https://wiki.linuxfoundation.org/networking/dccp F: include/linux/dccp.h F: include/linux/tfrc.h F: include/uapi/linux/dccp.hnet/ipv4/Kconfig +1
-1@@ -419,7 +419,7 @@ config INET_DIAG native Linux tools such as ss. ss is included in iproute2, currently downloadable at: - http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 + https://wiki.linuxfoundation.org/networking/iproute2 If unsure, say Y.net/sched/Kconfig +1
-1@@ -26,7 +26,7 @@ menuconfig NET_SCHED from the package iproute2+tc at <https://www.kernel.org/pub/linux/utils/net/iproute2/>. That package also contains some documentation; for more, check out - <http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2>. + <https://wiki.linuxfoundation.org/networking/iproute2>. This Quality of Service (QoS) support will enable you to use Differentiated Services (diffserv) and Resource Reservation ProtocolSignature · 1 line
2.37.3
Quoted 34 lines · On Mon, 10 Oct 2022 13:08:17 -0600 Jonathan Corbet <[email protected]> wrote:
Quoted 3 lines · Jouke Witteveen
The redirects from the old urls stopped working recently.
Signed-off-by Jouke Witteveen <[email protected]>I see the LF has done its annual web-site replacement; I have no idea why they are so enamored with breaking URLs...
Anyway, This is networking documentation, so it should go to the folks at netdev [CC'd] rather than me.
Quoted 14 lines
Documentation/networking/bridge.rst | 2 +- Documentation/networking/dccp.rst | 4 ++-- .../networking/device_drivers/ethernet/intel/ice.rst | 2 +- Documentation/networking/generic_netlink.rst | 2 +- MAINTAINERS | 2 +- net/ipv4/Kconfig | 2 +- net/sched/Kconfig | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-)Documentation/networking/bridge.rst +0
-0Documentation/networking/bridge.rst In order to use the Ethernet bridging functionality, you'll need the · line 11
Quoted 5 lines
Documentation/networking/bridge.rst +1
-1@@ -8,7 +8,7 @@ In order to use the Ethernet bridging functionality, you'll need the userspace tools. Documentation for Linux bridging is on: - http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge + https://wiki.linuxfoundation.org/networking/bridgeSo this page is full of encouraging stuff like:
Quoted 7 lines
Quoted 2 lines
The code is updated as part of the 2.4 and 2.6 kernels available at kernel.org.
...and tells us about an encouraging prototype implementation in 2.6.18. I'd apply the patch because working URLs are better than broken ones, but I also question the value of this material at all in 2022... there should be better documents to link to at this point?
This is ancient networking wiki.
I took old stuff put it on wiki back when I was working at LF but never updated since then.
Quoted 5 lines · Jonathan Corbet
Quoted 2 lines · Jouke Witteveen
The redirects from the old urls stopped working recently.
Quoted 16 lines
Quoted 1 line
Signed-off-by Jouke Witteveen <[email protected]>I see the LF has done its annual web-site replacement; I have no idea why they are so enamored with breaking URLs...
Anyway, This is networking documentation, so it should go to the folks at netdev [CC'd] rather than me.
Quoted 8 lines
Documentation/networking/bridge.rst | 2 +- Documentation/networking/dccp.rst | 4 ++-- .../networking/device_drivers/ethernet/intel/ice.rst | 2 +- Documentation/networking/generic_netlink.rst | 2 +- MAINTAINERS | 2 +- net/ipv4/Kconfig | 2 +- net/sched/Kconfig | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-)
Parts of this patch have been applied by now after being sent in by others. I believe the rest still makes sense to apply. Shall I rebase the patch and send it again? Or was there a reason for it to be left behind half a year ago?
Quoted 13 lines
Documentation/networking/bridge.rst In order to use the Ethernet bridging functionality, you'll need the · line 11
Quoted 10 lines
Documentation/networking/bridge.rst +1
-1@@ -8,7 +8,7 @@ In order to use the Ethernet bridging functionality, you'll need the userspace tools. Documentation for Linux bridging is on: - http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge + https://wiki.linuxfoundation.org/networking/bridgeSo this page is full of encouraging stuff like:
Quoted 7 lines
Quoted 2 lines
The code is updated as part of the 2.4 and 2.6 kernels available at kernel.org.
...and tells us about an encouraging prototype implementation in 2.6.18. I'd apply the patch because working URLs are better than broken ones, but I also question the value of this material at all in 2022... there should be better documents to link to at this point?
I don't know of any and indeed this patch only exists because working URLs are better than broken ones.
Quoted 4 lines
Thanks,
jon
Regards,
- Jouke